Search Results

Search found 4186 results on 168 pages for 'ember router'.

Page 117/168 | < Previous Page | 113 114 115 116 117 118 119 120 121 122 123 124  | Next Page >

• Issues configuring CUPS print server for Ubuntu Server 9.10

  - by Tone

  I have a 9.10 Ubuntu Server installed and I want to make it a print server and am trying to get access to the cups browser admin page from a windows client machine. I installed cups: sudo apt-get install cups then I edited the /etc/cups/cupsd.conf file and tried several different listen cominbations: Listen 192.168.1.109:631 #ip my router gives it3 Listen /var/run/cups/cups.sock #already in conf file Listen fileserver:631 #hostname of server Port 631 #listen for all incoming requests on 631? samba is also installed (which I think is necessary to share the printer out? and finally I added my user to the lpadmin group: sudo adduser tone lpadmin but when I try to navigate any of the following I get 403 forbidden http://fileserver:631/admin http://fileserver:631 http://192.168.1.109:631/admin http://192.168.1.109:631 What did I miss?

  Read the article

• How to stop intermittent playback on airtunes (iTunes + Airport Express)?

  - by Alex B

  Is there a definitive answer for how to stop intermittent "skips" or pauses while playing music from iTunes to an airport express connected to my home stereo? When I read other forums I see a wealth of posts that say "I did XYZ and it's fixed" followed by "I tried XYZ and it didn't work." This does not appear to be signal strength related. The green light on the Airport Express does not turn to yellow/orange. Other wireless devices have no trouble connecting at the same or greater distances from the wireless router.

  Read the article

• DYNDNS setup with TightVNC on Windows Server 2008 R2

  - by StealthRT

  Hey all, i seem to be having a problem with getting ports to forward on my Windows Server 2008 R2 PC. I already set all my port forwarding for 5900/5800 on my router for my PC's IP address (192.168.1.22) but when i try to use the TightVNC PFPortChecker on port 5900 it tells me its not opened! I can not even connect to my DYNDNS server name (xxxxxxx.dyndns.org). As a side note, i am running Windows XP SP3 within a VirtaulBox inside Windows Server 2008 R2 but running the PFPortChecker in Windows 2008 R2 brings the same results as it does in the VM. I also added them to the Windows Firewall Advanced Security form to add those inbound ports for full access. What could i possibly be missing? Thanks for your time! David

  Read the article

• WAN interface responds as LAN when request comes from LAN, is that correct?

  - by Eugenio Miró

  Hi Everyone! I have a problem with my router/modem. I've published an HTTP service from one of my internal computers and when I access the service from the internal lan using the external IP address the modem responds instead of redirecting the call to the forwarded port. I can access the service from outside however, but from the internal network the modem responds to my calls. I'm using a ZTE ZXDSL 831 Series modem with ZXDSL 831IIV7.5.1e_E09_BR1 firmware. Thanks in advance!

  Read the article

• Why would the Default Gateway constantly require resetting?

  - by Raven Dreamer

  I've had a (mostly) steady internet connection for the past two months. For the last hour, however, my connectivity has been dropping every 10 minutes or so, and must be reset. So far, I've always been able to fix the issue by running Windows network diagnostics (On Windows 7 64 bit), but the lack of constant internet is making it a pain to try and stream video, download games through steam, etc. Windows always reports a fix by "Resetting the Local Area Connector", telling me: Default Gateway Not Available. What's going on? Is the trouble on my end, or with my ISP? (Timewarner Cable) Things I've Tried: Reinstalling the motherboard's LAN drivers Manually setting a default gateway (gets cleared, reverts to default settings) Unplugged (Hard Reset) the router Unplugged / replugged ethernet cable.

  Read the article

• Why would Firefox not be able to visit Google anymore?

  - by Edward Tanguay

  Lately I've noticed that my Firefox Browser was taking a long time when I would search Google, e.g. 3 seconds before I would see any results. If I search for a three-word phrase, it just hangs trying to connect: I removed all add-ons but it still does this. I thought it might be something with my router, but Chrome, Safari, Opera and Internet Explorer all work fine. Bing works fine in Firefox. Here's my Firefox version information: Otherwise I can still use Firefox, e.g. I'm using it to post this question, but I do notice that when I browse with it, images are often "broken" for a split second before they appear, as if it is having a hard time pulling them from a remote server. Other browsers don't do this. What could be causing Firefox to hang when searching Google?

  Read the article

• Setup Cisco RVS4000 QOS for VOIP

  - by andyknas

  Just switched from dedicated T1's with analog phone lines to cable modem with 10/2 uplink. We're having some VOIP call quality issues on the outgoing side when bandwidth is stressed and I need to setup QOS or a VLAN on our RVS4000 router. Currently all phone traffic (talkswitch device and ip phones) are on it's own d-link PoE switch, and all workstations are on a LinkSys 1GB switch. Both switches are plugged into ports on the RVS4000. I'd like to set it up so that the dlink port has ~512Mbsp dedicated to it for voice at all times. It's my understanding that with a VLAN or QOS I can set this up. I've got QOS setup already with port 5060 to have high priority but it doesn't seem to make a difference.

  Read the article

• How to open ports on modem for better torrent performance

  - by Mehper C. Palavuzlar

  I've been using utorrent to download and upload torrents for a long time. Recently someone told me that I need to open port(s) for utorrent from my modem settings for better downloading and uploading performance. Is it true? If yes, how can I do that? My utorrent version: 2.0 and the port used for incoming connections: 61829. My modem: Yaksu S200 ADSL router modem and I can reach its settings via web interface. I looked at the settings but they seem a bit complicated to me. Other info you may need to know: I have dynamic IP. I'm using Win7 x64.

  Read the article

• Locate rogue DHCP server

  - by Farseeker

  I know this is a serious long shot, but here we go. In the past week or so, for users connected to a particular switch in our network (there are four dumb switches all connected, and it only affects SOME, not all, users on the one switch) are getting DHCP addresses from a rogue DHCP server. I have physically checked every cable plugged into the switch in question to make sure that none of them have a router or wifi point attached to it. I know the IP of the DHCP server, but I cannot ping it, and it does not have a web interface. Does anyone have any suggestions on what I can do to locate it or shut it down? Unfortuantely all the switches are unmanaged, and as mentioned, there's no physical device (that I can find) plugged in to anything. It's getting critical, because it's screwing up the PXE boot of a whole bunch of thin clients.

  Read the article

• 10/100 Network performing at 1.5 to 2.0 megabyte per second - is that below normal?

  - by burnt1ce

  This comes out to about 12 to 16 megabit/seond. I've read in forums that people are getting much higher speeds (ie: "40-60 Mb/s" http://forums.cnet.com/5208-7589_102-0.html?threadID=265967). I'm getting my benchmark by having a unmanged 5 port switch connected to a WRT54GS router connect. I'm sending a file from a computer connect to the WRT54GS to another computer that's connect to the unmanaged 5 port switch. Is the linkage of the switch causing this massive overhead? i doubt it. What could explain the slow down? electrical interference?

  Read the article

• Home networking - Wireless switch?

  - by gamers2000

  I currently have a Linksys WRT160N that has a couple wireless clients and a few wired clients. We are planning to switch from DSL to cable and unfortunately, there isn't a cable point in a location close to the wired clients (i.e. the new location of the router would be too far from the wired clients to lay Ethernet cables). Thus, I was wondering if there was a wireless switch of some sort in which it would be a standard Ethernet switch that would connect to my wireless network? (This is a home network,of course.)

  Read the article

• Unable to connect to Adobe Connect

  - by ub3rst4r

  I am having troubles trying to connect my colleges Adobe Connect. I have done the test meeting connection and it will say "Unable to connect". I have tried connecting on 3 other computers and it works with flying colors. I am running Norton 360 on my computer and I also tried it on my other laptop thats also running Norton 360 and it works on that laptop. I also checked my hosts file and that is not the problem because I am able to connect to the server (on port 80) but not the Adobe Connect port (port 1935). The only thing in it is "127.0.0.1 localhost" Here are the details from the log that the test created: Player Version: WIN 11,3,300,271 App-Server returned: code:ok, servers=rtmp://connect.bowvalleycollege.ca:1935/_rtmp://localhost:8506/,rtmpt://connect.bowvalleycollege.ca:443/_rtmp://localhost:8506/ ERROR: FMS Server did not return correctly! Here is my specifications: Windows 7 SP1 x64 Norton 360 v6.3 (latest) It won't connect in Firefox v15, Chrome v19, or IE9 All of my computers are connected through the same router (D-Link DIR-625) Any ideas?

  Read the article

• linksys Rvo16 redundant link config

  - by Adeodatus

  Hi All I have been given an RVO16 to play with. I'm multihomed and I'd like to set it up so that my primary, highest bandwidth link receives all traffic and the other connection is a hot spare basically. I want them both online but only the primary 1 used until it goes down then all traffic should automatically failover to the secondary link. Those of you that have played on an RVO16, can I do this and if so, how? I imagine I'd have it act as a router and pad the route on one so that the other is never used unless the primary is down. How? Thanks all.

  Read the article

• How to create tunnel to utilize for telnet connection.

  - by Z12

  The scenario is as follows: Machine A is located behind client firewall. The machine runs telnetd. This is Linux machine with Python 2.5.4 installed. I do not know the IP addy of the router and firewall is not open incoming. outgoing firewall is open. Machine B (Windows machine) is a server with well known IP address. I can install any programs I want on either machine. The idea is that I want Machine A to open a socket to machine B. Then I want to hold that socket and use to run a telnet session from Machine B to Machine A telnetd server. Is there any freeware that does this? Thoughts? Thanks!

  Read the article

• Unable to access local network when Cisco VPN client is connected

  - by bryanroth

  I'm a developer and don't have much networking expertise, so bear with me. I'm using the Cisco VPN Client 5.0.02.0090 to connect to my work's VPN that way I can RDP into my work computer. Once connected, I can't ping anything on the local network once connected to the VPN thus I am unable to access my work's network. This used to work about two weeks ago but abruptly stopped working today. However, I have the Cisco VPN Client installed on my laptop and I am able to ping and RDP into my work computer from there. Both my desktop and laptop computers are connected to the same router at home. I have tried the following so far: Rebooted my computer Reinstalled VPN client Updated NIC drivers Disabled firewall Opened up ports 500, 4500, and 10000 Any help would be much appreciated. Thanks!

  Read the article

• Copying files from NAS to NAS drives

  - by user1001421

  Very simple question. I've got 2 NAS drive that are "wire" connected via a router. If I have a wireless laptop and request a large amount of data be copied from one NAS drive to the other, does the network traffic go direct from the one drive to the other, going via the wired network, or does the network traffic go via my laptop, if you see what I mean. IE. From the NAS drives wired network, to the wireless network and then back to the wired network. Is this a common bottle-neck when copying a large amount of data? And if so, is there a way to avoid it. Thanks.

  Read the article

• TP-Link TL-WA701N not working good as wireless extender

  - by djechelon

  I bought the device in subject to extend the range of my WPA2/PSK-protected wifi network powered by a TP-Link TL-WR340G device (AP+router). I configured it as follows: Operation mode: Universal Repeater MAC of AP: scanned my SSID and got it Channel width: 20MHz Security options: the same as the parent AP (WPA2/PSK with AES encryption) After configuration inSSIDer shows me two APs beaconing the same SSID at different SNRs (because I was with my laptop close to the extender). After a few hours my tablet, far from the parent AP, stopped working. I found that the scan reported two networks with the same SSID: one WPA-protected and one free at all. This happened very frequently. Rebooting the extender by unplugging it worked but this doesn't last long. Sometimes the extender stops transmitting at all, sometimes it beacons an open network to which nobody can connect (because there is no DHCP). What's wrong with my configuration?

  Read the article

• Windows 8.1 killed notebook's wifi

  - by char1es

  Was running Windows 8 on a Lenovo G780 and updated to windows 8.1 Wifi does not work anymore, i always receive a dns server not responding error. I have tried using public dns servers from Google but with still no results. I've restarted my router with no results. All other devices on my network are having no trouble at all. I've tried updating the wireless driver but the manufacturers website claims that the Win8.1 driver should be updated with the update from windows. So i cant find a wireless driver... Anyone else having this error and does anyone have any ideas on how to fix it?? EDIT: here are the driver details: Broadcom 802.11n Network Adapter Provider: Microsoft Driver Date: 2013-05-31 Driver Version: 6.30.223.102 Digital Signer: Microsoft Windows Thanks

  Read the article

• Can I get an adapter for usb 3.0 to gigabit, or a gigabit switch with usb 3.0?

  - by techaddict

  Basically I want to be able to attach USB 3.0 external portable hard drives to my network and maintain at least gigabit speeds. I can think of four ways to do this, two of which I know exist: 1) NAS - get an NAS which features USB 3.0 and gigabit 2) Gigabit router with a USB 3.0 port and I want to know if these two exist: 3) gigabit switch (multiple gigabit ports) with at least one USB 3.0 port 4) USB 3.0 to gigabit adapter The gigabit adapter would be similar to this: http://www.addonics.com/products/nas30u2.php except that that is only USB 2.0 so it is not true gigabit, as gigabit is 125MBps but USB 2.0 is only 60MBps, so that adapter only has a maximum transfer speed of 60MBps and the "gigabit" is practically useless.

  Read the article

• How can I route all network traffic through Sonicwall Netextender VPN Client with Ethernet internet sharing enabled on a mac?

  - by Ryan Smith

  I basically have a sonic wall firewall protecting a server which I want to SSL VPN log into with multiple computers. However, I would like to do this by having those computers (or router with computer) connected to a Mac's ethernet port (the vpn would be over wireless) through the internet sharing feature on the iMac. We use the provided Sonicwall Netextender VPN Client to connect to the firewall / server and would like to only have to use one SSL ID to cover all the computers by only having the central Mac sign in. Can anyone out there help me achieve this or tell me it isn't possible? Thank a lot.

  Read the article

• Sonicwall networking

  - by Syed

  My Sonicwall LAN subnet is 192.168.1.0/24 X0: LAN IP 192.168.1.253 I also have intranet router 192.168.1.108 routing to 192.168.2.0/24 network. Internet is through WAN (X1) is all working fine. My LAN PC's can connect to intranet 192.168.2.0/24 via static route from LANsubnet to 192.168.2.0/24 as 192.168.1.108 as gateway. Now I have LAN2 10.2.1.254 (10.2.1.0/24)on X4 port. I can access Internet from LAN2, now I want to allow intranet from LAN2. What static routes do I need to make this work?

  Read the article

• configuration transfer over scp on commit not working on Juniper EX-2200 switch

  - by liv2hak

  I am making a series of configuration changes on Junos EX- 2200 switch.I have this router connected to another PC via an ethernet cable.The IP address of the switch is 192.168.1.1.I am able to ping from 192.168.1.1 to 192.168.1.0 and vice-versa. After the changes I make I do the following commands set system archival configuration transfer-on-commit set system archival configuration archive-sites "scp://[email protected]:/home/karthik/ws_karthik/sw1_config_1.txt" password godfather commit Where there is a user with user-name "karthik " and password "godfather".The path shown above also exists in the system How ever I don't see the configuration file sw1_config_1.txt created at the path specified. Also I have verified that sshd is running on the PC (192.168.1.10) Am I doing something wrong here? It would be great if anyone could help me out.

  Read the article

• OpenVPN performance: how many concurrent clients are possible?

  - by Steffen Müller

  I am evaluating a system for a client where many OpenVPN clients connect to a OpenVPN server. "Many" means 50000 - 1000000. Why do I do that? The clients are distributed embedded systems, each sitting behind the system owners dsl router. The server needs to be able to send commands to the clients. My first naive approach is to make the clients connect to the server via an openvpn network. This way, the secure communication tunnel can be used in both directions. This means that all clients are always connected to the server. There are many clients summing up over the years. The question is: does the OpenVPN server explode when reaching a certain number of clients? I am already aware of a maximum TCP connection number limit, therefore (and for other reasons) the VPN would have to use UDP transport. OpenVPN gurus, what is your opinion?

  Read the article

• Why isn't Synergy working for me?

  - by Anthony

  It worked for about a week then stopped working. I'm trying to make it work between a Windows 7 laptop and a Windows XP laptop. My router is a Linksys E1000. I tried uninstalling and reinstalling the program multiple times. I've tried port forwarding. I've tried making exceptions in the firewall. I've tried disabling the firewalls. It might be relevant also that Input Director doesn't work either. What am I doing wrong?

  Read the article

• Bind DHCP Server to Network Bridge

  - by Luke

  My wireless router died, so I decided to route everything through my server. So I installed a second NIC and a wireless card to be my new network: 1 NIC to the Modem, 1 NIC to the switch, and the Wireless to... Well, wireless. Anyways, I got far enough to get DHCP to work on just ONE adapter when I used Internet Connection Sharing (I couldn't get RRAS set up for the life of me), then I decided to try bridging the wireless and second NIC. Now, the DHCP server won't bind to the bridge, but I can enter manual IP's in my clients and it'll connect to the Internet. I also tried changing my wireless adapter's IP to 192.168.0.2, and to 192.168.1.1 to try to set up a separate scope, but to no avail. Running Windows Server 2003

  Read the article

< Previous Page | 113 114 115 116 117 118 119 120 121 122 123 124  | Next Page >