Search Results

Search found 6703 results on 269 pages for 'gnome terminal'.

Page 117/269 | < Previous Page | 113 114 115 116 117 118 119 120 121 122 123 124  | Next Page >

• Problem with Mono and .exe file

  - by Vere Nicolson

  I have purchased a piece of software to configure programable radio control transmitters. It says it will run on Linux, see below: Digital Radio runs on: Microsoft Windows 2000/2003/XP Microsoft Windows Vista/Seven/2008, Linux Ubuntu or a distribution with Mono, 32 or 64 bit, also in a virtual machine. Linux requires the Mono package installed, with also the Visual Basic 2005 runtime library. The Linux version is the same executable file of the Windows platform, and can be execute using Mono. You don't need Wine. All the tests have been done on Ubuntu Desktop 10.10 I have tried for weeks to get the drivers for the cable to work in XP or Win7 and I admit defeat. It looks like Ubuntu can run the cable effortlessly but now I can't get the software going. Tried to run in Ubuntu 10.04 with mono, GUI failed and I got the following message in terminal. $ mono ~/Desktop/GigRadioLinux/DigitalRadio/DigitalRadio.exe The entry point method could not be loaded Windows installation requires using a 30 odd character Passkey and a 4.24k text file as a "license" to be entered during running of the exe file. Can someone tell me how I enter the passkey and license into terminal, or is that not my primary problem? I don't understand "entry point method". Tried Wine and that didn't work either. The developer responded to my earlier emails re the cable drivers, but hasn't replied to questions regarding this. If I have left out anything important let me know and I will try to supply more information.

  Read the article

• Cannot get webapps to work after upgrade from 12.04 to 12.10

  - by kashan

  I just upgraded to Ubuntu 12.10 from 12.04. But I cannot use WebApps. In fact there is no sign of them anywhere. Firefox and Chromium are not prompting for integration. I tried re-installing both browsers/webapps plugin of each, but no luck. Out of curiousity, I tried to install unity-webapps-preview through terminal, apt-get reported that this operation is going to need 127mb. After installation, restarting session, nothing. I re-ran the unity-webapp-preview in terminal and SURPRISINGLY it again asked me that this operation is going to need 58mb. After Installation, nothing. Firefox is showing the unity-webapp plugin in Extensions but in Preferences there is noting like Unity settings or options for exceptions in General tab (as I seen in some threads). Chromium is not even showing the plugin in Extensions nor in the settings. Really need help. I know there is a reported bug but it is mostly about the complains that the webapps are not working as they should but in my case they don't seem to exist. EDIT: The out put of gsettings list-recursively | grep webapp is: com.canonical.unity.webapps allowed-domains @as [] com.canonical.unity.webapps dontask-domains @as [] com.canonical.unity.webapps index-update-time 43200 com.canonical.unity.webapps integration-allowed true com.canonical.unity.webapps preauthorized-domains ['amazon.ca', 'amazon.cn', 'amazon.com', 'amazon.co.uk', 'amazon.de', 'amazon.es', 'amazon.fr', 'amazon.it', 'www.amazon.ca', 'www.amazon.cn', 'www.amazon.com', 'www.amazon.co.uk', 'www.amazon.de', 'www.amazon.es', 'www.amazon.fr', 'www.amazon.it', 'one.ubuntu.com']

  Read the article

• Nautilus can't start due to segmentation fault

  - by Dmitriy Sukharev

  Out of the blue I can't start nautilus today. When I try to open any directory it tries to open it, and sometimes I even can see the content of directory, but finally it's closed, after that there are no icons on desktop. When I tried to launch nautilus from terminal, I got: $ nautilus . Initializing nautilus-dropbox 0.7.1 Initializing nautilus-gdu extension Segmentation fault (core dumped) I've tried to move ~/.local/share/gvfs-metadata folder, I don't have nautilus-open-terminal package and don't have file /usr/local/lib/libgtk-3.so.0 Also I can't update system right now. All the time I'm getting the the same hash-sum error: $ sudo apt-get update [sudo] password for dmitriy: Ign http://mirror.mirohost.net precise InRelease Ign http://mirror.mirohost.net precise-updates InRelease Ign http://mirror.mirohost.net precise-security InRelease Hit http://mirror.mirohost.net precise Release.gpg ... Ign http://ppa.launchpad.net precise/main Translation-en Hit http://mirror.mirohost.net precise-security/restricted Translation-en Hit http://mirror.mirohost.net precise-security/universe Translation-en Fetched 1 B in 1s (0 B/s) W: Failed to fetch gzip:/var/lib/apt/lists/partial/mirror.mirohost.net_ubuntu_dists_precise_universe_source_Sources Hash Sum mismatch E: Some index files failed to download. They have been ignored, or old ones used instead. Any ideas how to rescue my system? UPD: In syslog I have the following errors: Jul 7 21:35:02 dmitriy-desktop kernel: [ 58.059141] nautilus[1991]: segfault at 7fc09d9bb700 ip 00007fc0abb5feb6 sp 00007fff6caa4cf8 error 4 in libc-2.15.so[7fc0aba24000+1b3000] Jul 7 21:35:39 dmitriy-desktop kernel: [ 94.356490] update-notifier[3358]: segfault at 7f6507611700 ip 00007f64cc221eb6 sp 00007fffbcc0dd88 error 4 in libc-2.15.so[7f64cc0e6000+1b3000] Jul 7 21:37:45 dmitriy-desktop kernel: [ 220.501859] nautilus[3629]: segfault at 7f9b9744c700 ip 00007f9b7c9c6eb6 sp 00007fff72e990f8 error 4 in libc-2.15.so[7f9b7c88b000+1b3000] UPD2: Ubuntu version is 12.04.

  Read the article

• 12.04: Persistent Gimp 2.2 from Gimphoto or Gimpshop. Cannot install 2.8

  - by Jorge M. Treviño

  I have a very messed up installation of Gimp. Some time ago I installed Gimpshop or Gimphoto (can't really remember which) and it installed Gimp 2.2. Didn't work for me and tried to remove it. I've followed all Gimp remove, autoremove, clean, update and upgrade instructions I've found here to no avail. Now Software Center doesn't even show 2.8 but instead it does 2.6. I've installed and removed Gimp from terminal nth times. Running Gimp from the dash doesn't do anything but entering "Gimp" in the terminal prompt gives me a 2.2 installation screen. Cannot for the life of me find and remove the darn leftover garbage. How can I completely clean my system (12.04, fully updated today) from everything Gimp so I can give 2.8 a try? Anticipated apologies if this is a dupe but I've run through all messages with a Gimp tag and none has helped me. sudo apt-get install -f gives me 0,0,0,0. Thanks in advance.

  Read the article

• Hardening network with sysctl settings made Wi-fi downloading speed extremely slow

  - by Rohit Bansal

  I just followed up following steps to harden network security The /etc/sysctl.conf file contain all the sysctl settings. Prevent source routing of incoming packets and log malformed IP's enter the following in a terminal window: sudo vi /etc/sysctl.conf Edit the `/etc/sysctl.conf` file and un-comment or add the following lines : # IP Spoofing protection net.ipv4.conf.all.rp_filter = 1 net.ipv4.conf.default.rp_filter = 1 # Ignore ICMP broadcast requests net.ipv4.icmp_echo_ignore_broadcasts = 1 # Disable source packet routing net.ipv4.conf.all.accept_source_route = 0 net.ipv6.conf.all.accept_source_route = 0 net.ipv4.conf.default.accept_source_route = 0 net.ipv6.conf.default.accept_source_route = 0 # Ignore send redirects net.ipv4.conf.all.send_redirects = 0 net.ipv4.conf.default.send_redirects = 0 # Block SYN attacks net.ipv4.tcp_syncookies = 1 net.ipv4.tcp_max_syn_backlog = 2048 net.ipv4.tcp_synack_retries = 2 net.ipv4.tcp_syn_retries = 5 # Log Martians net.ipv4.conf.all.log_martians = 1 net.ipv4.icmp_ignore_bogus_error_responses = 1 # Ignore ICMP redirects net.ipv4.conf.all.accept_redirects = 0 net.ipv6.conf.all.accept_redirects = 0 net.ipv4.conf.default.accept_redirects = 0 net.ipv6.conf.default.accept_redirects = 0 # Ignore Directed pings net.ipv4.icmp_echo_ignore_all = 1 To reload sysctl with the latest changes, enter: sudo sysctl -p But, after applying the changes I found "Wi-fi" downloading speed and terminal downloading speed extremely slow (less than 1KB/s) however surfing speed through browser was good. But, using direct ethernet cable was giving a good speed. Then, I reverted back the above changes and things fall back in line once again.... Could you please let me know what possibly in above script is affecting such behaviour [and why] ? How could I still maintain hardening of network security without disturbing Wi-fi downloading speed ?

  Read the article

• Ubuntu Studio Audio Issue with Alsa - No sound

  - by ddragon

  Spec: OS: Ubuntu Studio 13.10 64bit CPU: AMD FX 4100 Quad Core Memory: 6GB DDR3 Video: Radeon HD 4250 (embedded on the mobo) Sound: Delta 66 PCI Issue: I just installed Ubuntu Studio and found out that the streaming audio on a few common website such as Youtube had no sound, and also my CD/DVDs via a player. Thus, in the terminal, I entered: sudo alsa force-reload It actually worked but the sound/audio output was MONO and NOT Stereo (the sources are set to stereo stereo), and it seemed I was not able to locate any settings that can switch the output sound to stereo at all. I went through many forums and eventually "autoremove" pulseaudio since many said I would not be able to utilize both pulseaudio and alsa in this case. Now, I have no audio whatsoever. Does this version of Ubuntu only offer mono sound/audio no matter what I do? Then, I may just need to ditch the whole thing and go back to Windows, which I don't want to since Ubuntu Studio offers many great apps, soundfonts etc.. I have also installed restricted extra, but even after rebooting, it did not resolve the issue. In the terminal mode, I pulled "alsamixer" and unmuted almost everything. But still no sound after a reboot. Just an FYI, I have no saved data under this version of Ubuntu Studio yet, so please feel free to let me know whether I need to install Studio 12.10 instead or mess with some installing/uninstalling apps/plug-ins, etc... If it breaks at some point, all I need to do is to re-install it, which I do not mind at all. Or, if you can provide me a step by step instruction to get this work, I do not mind clean install the Studio 13.10 then wait for your instruction AT ALL!

  Read the article

• Conflict between variable substitution and CJK characters in BASH

  - by AndreasT

  I encountered a problem with variable substitution in the BASH shell. Say you define a variable a. Then the command $> echo ${a//[0-4]/} prints its value with all the numbers ranged between 0 and 4 removed: $> a="Hello1265-3World" $> echo ${a//[0-4]/} Hello65-World This seems to work just fine, but let's take a look at the next example: $> b="?1265-3?" $> echo ${b//[0-4]/} ?1265-3? Substitution did not take place: I assume that is because b contains CJK characters. This issue extends to all cases in which square brackets are involved. Surprisingly enough, variable substitution without square brackets works fine in both cases: $> a="Hello1265-3World" $> echo ${a//2/} Hello165-3World $> b="?1265-3?" $> echo ${b//2/} ?165-3? Is it a bug or am I missing something? I use Lubuntu 12.04, terminal is lxterminal and echo $BASH_VERSION returns 4.2.24(1)-release. EDIT: Andrew Johnson in his comment stated that with gnome-terminal 4.2.37(1)-release the command works fine. I wonder whether it is a problem of lxterminal or of its specific 4.2.24(1)-release version.

  Read the article

• Updating Banshee to 2.4

  - by Lucasguy11

  I have banshee 2.2.1 with Ubuntu 11.10 I have been trying to update banshee to 2.4 (released yesterday) but it just isnt working, I have been using sudo add-apt-repository ppa:banshee-team/ppa in terminal, from the Banshee.fm website. but after running through terminal it says this: sudo add-apt-repository ppa:banshee-team/ppa You are about to add the following PPA to your system: PPA for Banshee Team This PPA contains the latest stable debs of Banshee for Ubuntu. To install Banshee, you must first enable the PPA on your system: 1. Open Software Sources (System->Administration->Software Sources) 2. Navigate to the "Third Party Sources" tab. 3. Click "Add" 4. Enter the APT line below that corresponds to your Ubuntu version that starts with "deb". 5. Click "Add Source" 6. Click "Close" 7. It will prompt you to reload your software cache. Click "Reload". 8. Now install the package "banshee" from Synaptic, or using the command below: sudo apt-get install banshee For those who wish to compile from trunk, add the deb-src line and then run "sudo apt-get build-dep" to install all required dependencies before starting to compile. Unstable (version which have odd minor version numbers) debs of Banshee can be found here: https://launchpad.net/~banshee-team/+archive/banshee-unstable More info: https://launchpad.net/~banshee-team/+archive/ppa Press [ENTER] to continue or ctrl-c to cancel adding it Executing: gpg --ignore-time-conflict --no-options --no-default-keyring --secret-keyring /tmp/tmp.OPAjxemDQr --trustdb-name /etc/apt/trustdb.gpg --keyring /etc/apt/trusted.gpg --primary-keyring /etc/apt/trusted.gpg --keyserver hkp://keyserver.ubuntu.com:80/ --recv 9D2C2E0A3C88DD807EC787D74874D3686E80C6B7 gpg: requesting key 6E80C6B7 from hkp server keyserver.ubuntu.com gpg: key 6E80C6B7: "Launchpad PPA for Banshee Team" not changed gpg: Total number processed: 1 gpg: unchanged: 1 I believe I have the ppa but, im not sure. I need a step by step process to get this, ive been trying to figure it out for quite a while now...

  Read the article

• Problem to install Apache 2.4.2 in Ubuntu 12.04

  - by Michael

  I followed these steps to install Apache 2.4.2 in Ubuntu 12.04, but it seems Apache is not installed, here's what I did (I followed the steps in this site http://www.discusswire.com/apache-2-4-installation-ubuntu/): sudo apt-get install build-essential sudo apt-get build-dep apache2 wget http://apache.mirrors.pair.com/httpd/httpd-2.4.2.tar.gz tar -xzvf httpd-2.4.2.tar.gz && cd httpd-2.4.2 sudo ./configure --prefix=/usr/local/apache2 --enable-mods-shared=all --enable-deflate --enable-proxy --enable-proxy-balancer --enable-proxy-http --with-mpm=prefork sudo make sudo make install when I tried to start by issuing sudo /usr/local/apache2/bin/apachectl start at terminal, I got the following warning: "AH00558: httpd: Could not reliably determine the server's fully qualified domain name, using 127.0.1.1. Set the 'ServerName' directive globally to suppress this message" and when I typed top at terminal, the apache is not there. I also tried to go to http://localhost/ or 127.0.0.1 or even 127.0.1.1 it showed "Can't establish connection to server ..." message. ps: I checked the error log and it showed "[Fri Jul 27 15:49:00.703901 2012] [proxy_balancer:emerg] [pid 20781] AH01177: Failed to lookup provider 'shm' for 'slotmem': is mod_slotmem_shm loaded?? [Fri Jul 27 15:49:00.704083 2012] [:emerg] [pid 20781] AH00020: Configuration Failed, exiting" What I'm missing? Thanks Michael

  Read the article

• Grub options are not visible on booting on Samsung ATIV Book 9 Lite running Ubuntu 14.04

  - by mjwittering

  I've managed to install Ubuntu 14.04 on my new Samsung ATIV Book 9 Lite ultrabook. After updating some configuratiosn in the UEFI installation was very easy. The only questions and issue I believe I'm still experience is when booting. I believe when the laptop would be displaying the grub boot options I see the following. There is a black screen with a purple border of 10px around the screen. I'd like to know how I can update my system so that I see the grub boot manager. I've run these commands: sudo cat /etc/default/grub # If you change this file, run 'update-grub' afterwards to update # /boot/grub/grub.cfg. # For full documentation of the options in this file, see: # info -f grub -n 'Simple configuration' GRUB_DEFAULT=0 GRUB_HIDDEN_TIMEOUT=0 GRUB_HIDDEN_TIMEOUT_QUIET=true GRUB_TIMEOUT=10 GRUB_DISTRIBUTOR=`lsb_release -i -s 2> /dev/null || echo Debian` GRUB_CMDLINE_LINUX_DEFAULT="quiet splash" GRUB_CMDLINE_LINUX="" # Uncomment to enable BadRAM filtering, modify to suit your needs # This works with Linux (no patch required) and with any kernel that obtains # the memory map information from GRUB (GNU Mach, kernel of FreeBSD ...) #GRUB_BADRAM="0x01234567,0xfefefefe,0x89abcdef,0xefefefef" # Uncomment to disable graphical terminal (grub-pc only) #GRUB_TERMINAL=console # The resolution used on graphical terminal # note that you can use only modes which your graphic card supports via VBE # you can see them in real GRUB with the command `vbeinfo' #GRUB_GFXMODE=640x480 # Uncomment if you don't want GRUB to pass "root=UUID=xxx" parameter to Linux #GRUB_DISABLE_LINUX_UUID=true # Uncomment to disable generation of recovery mode menu entries #GRUB_DISABLE_RECOVERY="true" # Uncomment to get a beep at grub start #GRUB_INIT_TUNE="480 440 1" The command was not possible, sudo efibootmgr.

  Read the article

• steam won't open after install

  - by Dan Cooper

  I've looked all over the place for a solution but no one seems to be getting the same error codes as me. When I try to run Steam through terminal I get the following error: Running Steam on ubuntu 13.04 64-bit STEAM_RUNTIME is enabled automatically Installing breakpad exception handler for appid(steam)/version(1367621987_client) Installing breakpad exception handler for appid(steam)/version(1367621987_client) unlinked 0 orphaned pipes Gtk-Message: Failed to load module "overlay-scrollbar" Installing breakpad exception handler for appid(steam)/version(1367621987_client) [1013/104817:WARNING:proxy_service.cc(646)] PAC support disabled because there is no system implementation /home/buildbot/buildslave_steam/steam_rel_client_ubuntu12_linux/build/src/steamUI/../common/steam/client_api.cpp (281) : Assertion Failed: ClientAPI_InitGlobalInstance: InternalAPI_Init_Internal failed. Assert( Assertion Failed: ClientAPI_InitGlobalInstance: InternalAPI_Init_Internal failed. ):/home/buildbot/buildslave_steam/steam_rel_client_ubuntu12_linux/build/src/steamUI/../common/steam/client_api.cpp:281 Installing breakpad exception handler for appid(steam)/version(1367621987_client) Uploading dump (out-of-process) [proxy ''] /tmp/dumps/assert_20131013104817_1.dmp /home/buildbot/buildslave_steam/steam_rel_client_ubuntu12_linux/build/src/steamUI/SteamStartup.cpp (627) : Assertion Failed: ! "There was a problem with your Steam installation.\n" "Please reinstall steam.\n" unlinked 2 orphaned pipes CAsyncIOManager: 0 threads terminating. 0 reads, 0 writes, 0 deferrals. CAsyncIOManager: 75 single object sleeps, 0 multi object sleeps CAsyncIOManager: 0 single object alertable sleeps, 1 multi object alertable sleeps [2013-10-13 10:48:16] Startup - updater built May 3 2013 15:08:27 [2013-10-13 10:48:16] Verifying installation... [2013-10-13 10:48:16] Verification complete Shutting down. . . [2013-10-13 10:48:17] Shutdown Finished uploading minidump (out-of-process): success = yes response: CrashID=bp-d172a742-b7dd-419c-b235-d60c32131013 I've tried sudo apt-get purge and terminal tries to tell me I don't have Steam installed. I've tried reinstalling with software center but that doesn't help either.

  Read the article

• chromium-browser usus 99,99% IO disk

  - by lars

  My favorite browser: chromium is testing my patience. For some reason it sometimes uses 99,99% of I/O. (reading 2-3MB/s) Other processes (updatedb.mlocate, [kswapd0], clementine, compiz) show the same behavior. However this problem always starts and ends with chromium. To illustrate the impact on my system: when my disk starts to spin like crazy en the led burns continiously the system is so slow that it takes about two to five minuits to switch to tty6, log in and execute "killall chromiumbrowser && killall chromium" This is way faster than starting a new terminal in X, just starting a terminal seems to heavy for compiz under these circumstances. Waiting until its over takes more than 30 minuits, if it ends at all. The exact circumstances are difficult to replicate. Several tabs have to be open, usualy 8 or more. It seems that the chance to increases when more complex sites like gmail of plugins like flash are running. Opening several new tabs at omgubunt.co.uk has the best chance to replecate this isue. I have no idea where to start looking for a solution. Any help would be greatly apreciated ubuntu 12.10 | 2GB | 2x 1.66GHz Intel | 32bit | IBM Thinkpad R60e

  Read the article

• How to fix no splash screen in Ubuntu after nvidia proprietary driver installation (also black borders)

  - by Fabio Trevisiol

  This is soultion how to fix no splash screen in Ubuntu after nvidia proprietary driver installation. It's no matter what Ubuntu version you use, it should work anyway. (TESTED ON 14.04) Open your terminal and type: sudo apt-get install v86d (TEST WITHOUT) Then: sudo gedit /etc/default/grub Find this line: #GRUB_GFXMODE=640x480 Add below (of course choose your resolution): GRUB_GFXMODE=1024x768x32 (TRY WITHOUT OR DIFFERENT BIT DEPTH) GRUB_GFXPAYLOAD_LINUX=1920x1080x32 (YOU CAN ALSO USE THE KEEP OPTION) Save file and type in terminal: echo FRAMEBUFFER=y | sudo tee /etc/initramfs-tools/conf.d/splash (ALLOWS TO AVOID THAT THE SPLASH SCREEN IS DISPLAYED FOR A FEW SECONDS) sudo update-initramfs -u sudo update-grub2 For all those who complain about the presence of black borders in "plymouth", try to make these changes before installing the nvidia driver or switch back from nvidia to nouveau and from nouveau to nvidia. Kernel update from the Software Updater? It happened to me; I don't know if it matters. I don't know for which of these reasons, but after a few reboots, the black borders are gone. UPDATE discovered the secret: during all these beautiful things, something strange happened. glxinfo | grep vendor server glx vendor string: SGI client glx vendor string: Mesa Project and SGI OpenGL vendor string: nouveau

  Read the article

• Steam freezes at login screen

  - by Snail284069

  I have just installed Steam on Xubuntu, and after it finished installing it went to the login screen, but the screen is frozen, and I cannot press the buttons. When running Steam though the terminal it says: alex@Craptop:~$ steam Running Steam on ubuntu 14.04 32-bit STEAM_RUNTIME is enabled automatically Installing breakpad exception handler for appid(steam)/version(1400690891_client) Installing breakpad exception handler for appid(steam)/version(1400690891_client) Installing breakpad exception handler for appid(steam)/version(1400690891_client) Installing breakpad exception handler for appid(steam)/version(1400690891_client) Gtk-Message: Failed to load module "overlay-scrollbar" Gtk-Message: Failed to load module "unity-gtk-module" Installing breakpad exception handler for appid(steam)/version(1400690891_client) [0522/174755:WARNING:proxy_service.cc(958)] PAC support disabled because there is no system implementation Fontconfig error: "/etc/fonts/conf.d/10-scale-bitmap-fonts.conf", line 70: non-double matrix element Fontconfig error: "/etc/fonts/conf.d/10-scale-bitmap-fonts.conf", line 70: non-double matrix element Fontconfig warning: "/etc/fonts/conf.d/10-scale-bitmap-fonts.conf", line 78: saw unknown, expected number Installing breakpad exception handler for appid(steam)/version(1400690891_client) Installing breakpad exception handler for appid(steam)/version(1400690891_client) [HTTP Remote Control] HTTP server listening on port 35849. Installing breakpad exception handler for appid(steam)/version(1400690891_client) Installing breakpad exception handler for appid(steam)/version(1400690891_client) Process 2764 created /alex-ValveIPCSharedObjects5 Installing breakpad exception handler for appid(steam)/version(1400690891_client) Generating new string page texture 12: 48x256, total string texture memory is 49.15 KB Generating new string page texture 13: 256x256, total string texture memory is 311.30 KB Generating new string page texture 14: 128x256, total string texture memory is 442.37 KB Generating new string page texture 15: 384x256, total string texture memory is 835.58 KB and then the terminal gets stuck too, letting me type into it but not doing anything. I tried reinstalling and restarting the computer, but it still keeps happening.

  Read the article

• Synaptic won't launch from menu in panel in fresh Lubuntu minimal desktop 12.04 install

  - by ven42

  I performed a fresh install of Lubuntu 12.04 with minimal desktop, as described here: https://help.ubuntu.com/community/Lubuntu/Documentation/MinimalInstall. To clarify, I did a command-line install from the Lubuntu alternative install disc, then I did an "apt-get install --no-install-recommends lubuntu-desktop". Everything is working fine, except that Synaptic will not run from the menu entry in the panel. I am not prompted for a password, and no window of any sort appears after clicking the menu entry. I installed lxshortcut to see what the shortcut was running, and the command is "synaptic-pkexec". If I type this command into the "Run" menu, I get the same behavior (or lack thereof). I can get Synaptic to open up just fine by typing "gksudo synaptic" at the "Run" menu. Also, if I run "synaptic-pkexec" from the terminal, then I am prompted for my password within the terminal, and after that Synaptic opens normally. Can someone please suggest the right way to get Synaptic working? I could just change the menu entry to "gksudo synaptic", but I'm guessing that it's set to "synaptic-pkexec" for a reason. I have a vague understanding that this pkexec business has something to do with PolicyKit, but I don't really know what PolicyKit is or how to tell if something is broken with it. Thanks.

  Read the article

• How do I get my Lexmark x4650 printer working?

  - by Fallen Dohingy

  I think that my printer stopped working with the switch to gnome 3 or unity. Yes I have tried 32 and 64 bit os's. Here is the driver In order to actually install the driver, you need to extract it and then open up terminal and type sudo and then a space. Then drag the script into the terminal window. Here is what it said in the diver install window: Extracting file: printdriver.te Extracting file: lexmark-08z-series-driver-1.0-1.i386.deb Extracting file: launcher.c Extracting file: launcherfallendohingy@Ubuntu-Inspiron-15R:~$ sudo '/home/fallendohingy/Downloads/lexmark-08z-series-driver-1.0-1.i386.deb.sh' [sudo] password for fallendohingy: Verifying archive integrity... All good. Uncompressing nixstaller.............................................................. Collecting info for this system... Operating system: linux CPU Arch: x86_64 Warning: No installer for "x86_64" found, defaulting to x86... TRACKING IDENT = 170209 cpu speed = 2394 MHz ram size = 3762.69921875 MB hd avail = 74348 MB (gtk:17645): GdkPixbuf-WARNING **: Cannot open pixbuf loader module file '/usr/lib/i386-linux-gnu/gdk-pixbuf-2.0/2.10.0/loaders.cache': No such file or directory (gtk:17645): GdkPixbuf-WARNING **: Cannot open pixbuf loader module file '/usr/lib/i386-linux-gnu/gdk-pixbuf-2.0/2.10.0/loaders.cache': No such file or directory (gtk:17645): GdkPixbuf-WARNING **: Cannot open pixbuf loader module file '/usr/lib/i386-linux-gnu/gdk-pixbuf-2.0/2.10.0/loaders.cache': No such file or directory (gtk:17645): GdkPixbuf-WARNING **: Cannot open pixbuf loader module file '/usr/lib/i386-linux-gnu/gdk-pixbuf-2.0/2.10.0/loaders.cache': No such file or directory /usr/lib/gio/modules/libgvfsdbus.so: wrong ELF class: ELFCLASS64 Failed to load module: /usr/lib/gio/modules/libgvfsdbus.so Extracting file: lsbrowser Extracting file: lsusbdevice Using dpkg installation ============================= Execute: dpkg -i --force-architecture lexmark-08z-series-driver-1.0-1.i386.deb > /tmp/selfgz17540/pkg/files/dpkg_msgs ============================= ============================= Execute: rm lexmark-08z-series-driver-1.0-1.i386.deb ============================= ============================= Execute: /sbin/udevadm control --reload-rules ============================= Successfully installed the .deb Lexmark drivers.

  Read the article

• Why can't I run Compiz?

  - by jasoncruz98

  I installed Ubuntu 11.10 on my laptop. The main reason I switched to Ubuntu is because I wanted to use Compiz. The first thing I did was to go to Additional Drivers and install ATI/AMD Proprietary FGRLX Graphics Driver. There was also another one available, ATI/AMD Proprietary FGRLX Graphics Driver (post-release updates), but I didn't install that one, because it basically meant the same thing to me as the one I already installed. Next, I went to the ubuntuguide.org Oneiric Wiki http://ubuntuguide.org/wiki/Ubuntu:Oneiric#Compiz_Fusion So I followed the instructions there and ran this command in terminal: sudo apt-get install compiz compizconfig-settings-manager compiz-fusion-plugins-main compiz-fusion-plugins-extra emerald librsvg2-common But then, the terminal window said that the package "emerald" could not be found. So, I ran this command instead: sudo apt-get install compiz compizconfig-settings-manager compiz-fusion-plugins-main compiz-fusion-plugins-extra After that, I installed Fusion Icon by running this command: sudo apt-get install fusion-icon I restarted my computer, searched for Compiz Config Settings Manager, and clicked on it. Then, I activated Wobbly Windows. I logged off and logged back on again, but there was no wobbly windows effect. So I tried clicking on Fusion Icon, but it never started. Can someone please tell me what I did wrong here? Because I see everyone seems to be able to run Compiz except me. I really need to start Compiz, or else I think I'm going to uninstall Ubuntu.

  Read the article

• How to get a Sun Ray to load a firmware from elsewhere

  - by vdiozguy

  I run a Sun Ray/VDI demo environment internally within the company - and because it's not a public service, I need to tell my Sun Rays to connect to it directly so that I don't get redirected to the corporate servers. To get any new Sun Ray to connect to *my* setup I usually pull out my laptop so that the Sun Ray can load the new version of the F/W along with the permission to pull up the management GUI via STOP-S.But there is a better way if you have another Sun Ray server handy:1) allow your Sun Ray to connect to the default corporate server2) log in to a "regular" session, that is a Solaris or Linux desktop on the Sun Ray server itself3) in a terminal, utswitch to your server (/opt/SUNWut/bin/utswitch -h myserver)4) again, login to a regular session there5) in a terminal,  issue "/opt/SUNWut/lib/utload -S myserver -w"6) Watch your firmware load and wait7) the Sun Ray will reboot and connect to the first server again. Repeat steps 2-48) issue "/opt/SUNWut/lib/utload -S myserver -f SunRay.enableGUI"9) Press STOP-S and be merryNOTE: I'm sure there is even yet a better way - this is totally unsupported, most likely a figment of my imagination. In any case, this post will self-destruct in BOOM.

  Read the article

• Question No 207630 replied by Marco Braida

  - by kishor

  Question No 207630 replied by Marco Braid After your reply I could install Synaptic,then AptonCD,Gdebi and some other applications. I had made APTONCD. I was convienced that Ubuntu 12.04 LTS is working well. I had removed everything ( Ubuntu 12.04,Fuduntu,Linix mint 13) from my hard disk and reinstalled Ubuntu 12.04 LTS. Your sugestion which worked well earlier does not work now. I get following msg on terminal. Reading package lists... Done Building dependency tree Reading state information... Done The following extra packages will be installed: gdebi-core The following NEW packages will be installed: gdebi gdebi-core 0 upgraded, 2 newly installed, 0 to remove and 411 not upgraded. Need to get 0 B/185 kB of archives. After this operation, 1,398 kB of additional disk space will be used. Do you want to continue [Y/n]? y Media change: please insert the disc labeled 'APTonCD for ubuntu precise - amd64 (2012-10-14 10:27) DVD1' in the drive '/media/cdrom/' and press enter Media change: please insert the disc labeled 'APTonCD for ubuntu precise - amd64 (2012-10-14 10:27) DVD1' in the drive '/media/cdrom/' and press enter Media change: please insert the disc labeled 'APTonCD for ubuntu precise - amd64 (2012-10-14 10:27) DVD1' in the drive '/media/cdrom/' and press enter This is for gdebi similar msg is on terminal when I tried for Synaptic and AptonCD. I had downloaded files for Synaptic and treid but without susscess. Kishor

  Read the article

• unity, seeing all instances of same open application windows on all virtual desktop

  - by Nasser M. Abbasi

  I noticed this strange issue with unity. I am using 12.04. The desktop has 4 virtual desktops, which I can switch between using the 'workspace switcher' which is very nice. But I noticed the following: When I have 2 instances of the same app (say 2 different firefox windows, or 2 different terminal windows), in 2 different virtual desktops, then I click on the icon for that application located on the launcher panel (the left long strip with icons on it), then I see the application comes into focus. Then when I click again right away (on the same icon on the launcher), then now all instances of this application that are open come into ONE view (may be on was on desktop 1, and the other was on desktop 3 for example) and then I can now click on the one instance window that I want to select to use. This is all very nice actually. But this does NOT work for all applications! I just tried it, and it worked for firefox, and for gedit and for the gnome terminal. I have one firefox window open in virtual desktop 1, and another window open in virtual desktop 2. I clicked once on the firefox icon, then again, and both windows came into the main desktop and I was able to select which one to use. When I tried the same thing on dolphin file manager, which I also had 2 windows (instances) of it open in 2 different virtual desktops, this behavior did not happen. I clicked again, and nothing happened. Only one remained in focus. So I had to fo look for the second dolphin window the hard way. It looks like some apps are supported by this feature and some are not. How does one make it so that all applications are supported like this? This is a very handy feature. Is it a configuration item somewhere? thanks

  Read the article

• How to get Broadcom BCM 43XX Wireless card working

  - by Fer1805

  NOTE - Although this question is for a specific version of Ubuntu and a specific Broadcom model, the answer to it is for most Broadcom models and versions of Ubuntu 11.04, 11.10, 12.04 and 12.10. If you have come here from another question, feel free to read the answer instead. The answer covers many problems with several solutions. I'm having serious problems installing the Broadcom drivers for Ubuntu 11.04. It worked perfectly on my previous version, but now, it is impossible. I'm a user with no advance knowledge in Linux, so I would need clear explanations on make, compile, etc. I was following the instructions on the following blog, with no luck. How can I get Broadcom BCM4311 Wireless working? Can someone help me? Edit: For the command: "lspci | grep Network", I get the following message: 06:00.0 Network controller: Broadcom Corporation BCM4311 802.11b/g WLAN (rev 01) For the command: iwconfig, i get the following: lo no wireless extensions. eth0 no wireless extensions. When i follow the following steps (from the above link), there are a NO error message at all: open the 'Synaptic Package Manager' and search for bcm uninstall the bcm-kernel-source package make sure that the firmware-b43-installer and the b43-fwcutter packages are installed type into terminal: cat /etc/modprobe.d/* | egrep '8180|acx|at76|ath|b43|bcm|CX|eth|ipw|irmware|isl|lbtf|orinoco|ndiswrapper|NPE|p54|prism|rtl|rt2|rt3|rt6|rt7|witch|wl' (you may want to copy this) and see if the term blacklist bcm43xx is there if it is, type cd /etc/modprobe.d/ and then sudo gedit blacklist.conf put a # in front of the line: blacklist bcm43xx then save the file (I was getting error messages in the terminal about not being able to save, but it actually did save properly). reboot 'End of procedure' Before (not ubuntu 11.04), if i wanted to connect wireles, i just went to the icon at the upper side of the screen, click, showed ALL the wireless network available, and done. Now, the only options i see are: Wired Network Auto Eth0 Disconnect VPN Enable networking Connection information Edit connection. hope above info is enough for your help.

  Read the article

• Ubuntu 12.04 - Brightness controls not working

  - by Juan Manuel Zolezzi Volpi

  Controls from "Brightness and Lock" were not working so I've tried a solution that involved changing grub, which I'm detailing below: # If you change this file, run 'update-grub' afterwards to update # /boot/grub/grub.cfg. # For full documentation of the options in this file, see: # info -f grub -n 'Simple configuration' GRUB_DEFAULT=0 #GRUB_HIDDEN_TIMEOUT=0 GRUB_HIDDEN_TIMEOUT_QUIET=true GRUB_TIMEOUT=10 GRUB_DISTRIBUTOR=`lsb_release -i -s 2> /dev/null || echo Debian` GRUB_CMDLINE_LINUX="quiet splash acpi_backlight=vendor" # Uncomment to enable BadRAM filtering, modify to suit your needs # This works with Linux (no patch required) and with any kernel that obtains # the memory map information from GRUB (GNU Mach, kernel of FreeBSD ...) #GRUB_BADRAM="0x01234567,0xfefefefe,0x89abcdef,0xefefefef" # Uncomment to disable graphical terminal (grub-pc only) #GRUB_TERMINAL=console # The resolution used on graphical terminal # note that you can use only modes which your graphic card supports via VBE # you can see them in real GRUB with the command `vbeinfo' #GRUB_GFXMODE=640x480 # Uncomment if you don't want GRUB to pass "root=UUID=xxx" parameter to Linux #GRUB_DISABLE_LINUX_UUID=true # Uncomment to disable generation of recovery mode menu entries #GRUB_DISABLE_RECOVERY="true" # Uncomment to get a beep at grub start #GRUB_INIT_TUNE="480 440 1" After doing this, the brightness control dissapeared like you can see at http://screencloud.net/img/screenshots/6b90d56604b70cc749a632d0bc005a20.png Any ideas? Would love to be able to configure Brightness or even use apps like F.lux to regulate it automatically. Edit: I've modified the following line to GRUB_CMDLINE_LINUX_DEFAULT="quiet splash acpi_osi=" and now the brightness controls are back, but whatever I change the brightness remains the same. Just in case I'm using Intel H77

  Read the article

• Is this an apt-get issue or network issue?

  - by zharvey

  I just installed my first Ubuntu server (12.04) instance and immediately am noticing a few things: Running apt-get install or update fails (see below) Running ifconfig produces peculiar IP addresses starting with 10.x.x.x and my router does not see the server at all in its "Attached Devices" page (its a consumer grade Netgear) When I run apt-get I get 50+ of the following errors: Failed to fetch <some-http-url. Temporary failure resolving <blah.ubuntu.com I read up on this error for 12.04, and found some similar posts on this forum and on serverfault that recommended going into /etc/resolv.conf and adding an entry: nameserver 8.8.8.8 To my surprise, I found that /etc/resolve.conf was a symlink pointing to somewhere else and I had to delete it first, then create a new one with the entry indicated above. I restarted the server and tried running apt-get again: same results. How do I start diagnosing the problem (I'm a relatively new Linux/Ubuntu user)? Additional details that may help: This is actually a virtual machine running as a VirtualBox guest OS The physical host that is running this VM is my laptop which has a wireless connection; I'm wondering if (somehow) the laptop is getting the network wirelessly, but perhaps either the VBox VM and/or the Ubuntu server OS isn't configured for wireless and so nothing is "getting through"? Thanks in advance for any pointers! Edit: Here is a snapshot of my VM's Network settings (only Adapter 1 has any information populating its fields, so I assume my VM has only 1 adapter): Here is the output when I run ifconfig from the terminal: And here is the output when I run route from the terminal: Running ping google.com:

  Read the article

• Ubuntu 12.04 problem with E160 huawei - can't detect the device and freezing system

  - by Matt

  I have just installed 12.04 and plugged in E160 and nothing happened - modem doesn't mount. I have found this solution : Ubuntu does not mount some Huawei devices due to bugs, problems etc. See if these work: 1st option: Connect the USB modem. After 10 seconds, type this in a terminal window: lsusb The output will be like this: Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 004 Device 004: ID 12d1:140b Huawei Technologies Co., Ltd. Bus 004 Device 002: ID 413c:3016 Dell Computer Corp. Optical 5-Button Wheel Mouse Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 002 Device 005: ID 0b97:7762 O2 Micro, Inc. Oz776 SmartCard Reader Bus 002 Device 004: ID 413c:8103 Dell Computer Corp. Wireless 350 Bluetooth Bus 002 Device 003: ID 0b97:7761 O2 Micro, Inc. Oz776 1.1 Hub Bus 002 Device 002: ID 413c:a005 Dell Computer Corp. Internal 2.0 Hub Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub The device is a Huawei modem, so let's look at the output. The relevant entry is: Bus 004 Device 004: ID 12d1:140b Huawei Technologies Co., Ltd Hence, you must type: sudo modprobe usbserial vendor=0x12d1 product=0x140b 2nd option Download usb-modeswitch and usb-modeswitch-data packages from packages.ubuntu.com. Install them through the command: sudo dpkg -i usb-modeswitch*.deb 3rd option Try a combination of both. but with no result. The modem is still not detected. I've tried to add a new connection but the system can't see my device in setup dialogue. Also I have noticed that when I open eg. terminal and try to type sth, the system freezes for a while.. Thanks for help!

  Read the article

• Cannot delete .Trash-503 directory, returns a $RECYCLE.BIN.trashinfo: Input/output error

  - by Parto

  I cannot delete .Trash-503 folder via GUI or terminal, it returns a $RECYCLE.BIN.trashinfo: Input/output error Not even sudo rm -r or even a simple ls works in that trash directory. Check terminal output below: subroot@subroot:~$ cd /media/xxxxx/ subroot@subroot:/media/xxxxx$ rm .Trash-503/ rm: cannot remove `.Trash-503/': Is a directory subroot@subroot:/media/xxxxx$ rm -r .Trash-503/ rm: cannot remove `.Trash-503/info/$RECYCLE.BIN.trashinfo': Input/output error rm: cannot remove `.Trash-503/info/found.000.trashinfo': Input/output error rm: cannot remove `.Trash-503/info': Directory not empty subroot@subroot:/media/xxxxx$ sudo rm -r .Trash-503/ [sudo] password for subroot: rm: cannot remove `.Trash-503/info/$RECYCLE.BIN.trashinfo': Input/output error rm: cannot remove `.Trash-503/info/found.000.trashinfo': Input/output error subroot@subroot:/media/xxxxx$ cd .Trash-503/ subroot@subroot:/media/xxxxx/.Trash-503$ ls info subroot@subroot:/media/xxxxx/.Trash-503$ cd info/ subroot@subroot:/media/xxxxx/.Trash-503/info$ ls ls: cannot access $RECYCLE.BIN.trashinfo: Input/output error ls: cannot access found.000.trashinfo: Input/output error found.000.trashinfo $RECYCLE.BIN.trashinfo subroot@subroot:/media/xxxxx/.Trash-503/info$ What's going on here and how can I delete this folder? EDIT I tried checking and repairing the partition using gparted only to get this error message: ERROR: Filesystem check failed! ERROR: 264 clusters are referenced multiple times. NTFS is inconsistent. Run chkdsk /f on Windows then reboot it TWICE! The usage of the /f parameter is very IMPORTANT! No modification was and will be made to NTFS by this software until it gets repaired. I don't have windows installed, how can I run chkdsk /f from ubuntu?

  Read the article

< Previous Page | 113 114 115 116 117 118 119 120 121 122 123 124  | Next Page >