Search Results

Search found 8328 results on 334 pages for 'hope i helped'.

Page 117/334 | < Previous Page | 113 114 115 116 117 118 119 120 121 122 123 124  | Next Page >

  • Cable management between multiple racks

    - by RippieUK
    I am in the planning phase of re-cabling our 5 racks in one of our offices and I would like to ask for some guidance on how you go, or would go about managing cables that goes between racks. In our situation we have 5 racks where the furthest to the right is our main patch panel for 300 floor ports. The rack next to it is our main comms rack where main switches and ISP routers are located. the other 3 racks next to the comms rack then all need to connect back to the main comms rack. I am not sure if a 48 port patch panel in each rack would be any good for this scenario? mainly because i am not sure this can be linked back to the main switch with only 1 cable. Would a 48 port switch in each rack be better as you can uplink those back to main switch? Or should we just run cables between racks back to the main switch? Hope someone can offer some guidiance. Thx

    Read the article

  • Do I need a license to create pdf files? [closed]

    - by Fire-Dragon-DoL
    I hope this is the correct place where I could ask this question. My mother is an accountant with a degree in economics. She works as a freelancer and she needs some licenses for her job. The biggest problem is adobe acrobat standard, which costs 400€, quite a lot. I want understand if she must buy it to create pdf files or she can use some free (even for commercial use) programs that she has because of her job (the chamber of commerce provide some advantages to accountants). She is actually using PDFCreator, which as I can read is free for business usage (open source also!!): http://sourceforge.net/projects/pdfcreator/ Thanks for any suggestion

    Read the article

  • Cannot extend existing data disk over 2TB on windows 2008 with dynamic and gpt part

    - by DJYod
    As my D: disk is almost full (2TB) I extended the FC lun to 2.5TB. The new 500Go are seen by windows as "Unalloacted" as expected. I tried to extend the volume but windows says "The is not enough space available on the disk(s) to complete this operation" I read on the web that the disk should be configured as GPT and as a dynamic and it's already a dynamic gpt disk... How can I extend my disk without any data loss? My operating system is Windows 2008 R2 x64 SP1 and the SAN a 3PAR I hope someone can help me :) Thank you very much

    Read the article

  • Detect an IP address of a Wireless Access Point device

    - by dempap
    I have a Wireless Access Point device (http://www.szedup.com/show.aspx?id=1706), which I am planning to put into BeagleBoard-xM, in order to achieve wireless communication (LAN). However, I can't find it's IP address. I mean, I have to know it's IP address in order to connect with BeagleBoard-xM via a terminal emulator. For the moment, I have this device connected via Ethernet on my router. My router's setting page shows I have this device connected, but no further information. Is there any way to find the IP address of the Wireless Access Point? I hope of being understood. Any help would be really appreciated.

    Read the article

  • No Question mark suddenly É instead. Why?

    - by Xavierjazz
    Windows xp3. This happens occasionally. Today it happened in a calendar item in outlook 2003. As you can see from the title here, the question mark is working here (firefox). I am typing and suddenly the question mark is replaced by this character, É and I have no idea why. Can anyone answer this? I hope this is an appropriate site for this question. Thanks a lot.

    Read the article

  • What is the best solution for letting both Macs and PCs access digital images and videos on a networ

    - by Gertbert
    I'm looking for a simple way to share digital images and videos over a network to both Macs and PCs. I'm currently looking into three options: NAS, WD MyBook Mirror drives attached to a router, or an HP WHS product like the Data Vault. I'm looking for something easy to implement that allows for drive mirroring but also has good performance for both Macs and PCS. I've read that the HP WHS devices rebalance on their own schedules, making them useless for streaming video, and hope someone can definitively confirm or deny this as it's a dealbreaker if true. Any other suggestions are appreciated. Thanks!

    Read the article

  • Changing Internet connection on ISA Server 2000

    - by garyb32234234
    Hi We are getting a new internet connection installed and will need to unplug the old one and connect this to our ISA Server 2000. Will this be a simple swap out job? We will be given a new ip, which i know i will have to enter into the external network card TCP/IP page. I will also be given the default gateway to enter. The ISP engineer said we may have to reset the ARP? cache, if we dont know how we will have to reset the ISA server? Has anyone any experience? The current connection is with the same ISP but it was owned by the business park were we are located and they linked up an ethernet port to what i assume is their own router. Hope you can help, i know that ISA 2000 is somewhat less easy to use than the newer versions.

    Read the article

  • Missing disk space in Windows XP

    - by Jørn Schou-Rode
    On my mother's Lenovo laptop, Windows XP claims that the hard drive is almost full. According to the properties window, 52.7 out of 55.2 GB is in use: By deleting temp files from Internet Explorer, System Restore, Recycle bin, Windows Update, System Cleanup, I managed to free up about one GB. That's still 50 GB in use, which still is a lot more than I expected. Hence, I gave good old WinDirStat a spin, and here's the output: It might be hard to read here, but the first line says that the total amount of disk space in use on drive C is 24.3 GB. So Windows claims usage of 52.7 GB and WinDirStat can only account for 24.3 GB. Where is the other half of that disk space being used? I hope someone has an answer, or some tricks or tips to do further research. UPDATE: The laptop in question has an SSD hard drive. I am aware that these disk (at least the earlier ones) have a limited life-time. Could the symptoms described be caused by wear and tear on the SSD?

    Read the article

  • Suggested benchmark for testing CPU footprint of antivirus software

    - by Alex Chernavsky
    Our organization is currently running Symantec Corporate Antivirus, which is rumored to be a big resource hog. I know that we do have a lot of older machines that are running slow. Our PCs are all running Windows XP Pro and are used only for business applications (mostly Microsoft Office), e-mail, and web surfing. They're not used for gaming (one would hope not, anyway). I'd like to take one of the old PCs and do a speed benchmark test while it's running Symantec AV, then another test with no antivirus, and a third test with ESET NOD32. As I said, I don't care much about graphics performance. What would be an appropriate benchmarking program program to use? Freeware is best, of course. Thank you for considering my question.

    Read the article

  • logitech unifying receiver

    - by Plastkort
    hi! I am having multiple logitech devices, and each and one of them seem to have theire own receiver, occupying USB ports.. I read upon Logitech unifying receiver, and it seem to connect multiple wireless devices from logitech, however I wonder if I just buy this one receiver, will I be able to connect my existing wireless devices, or will I be forced to buy new keyboard and mouse in order to use the unifying receiver? hope anyone here have the answer so I dont need to spend money on something I cannot use.. :) I got PC 1 Logitech Dinovo Edge keyboard Logitech MX Air mouse PC 2 Logitech Dinovo Keyboard Logitech VX mouse

    Read the article

  • Positive result, negative result and current balance. How do you make starting balance show current result?

    - by Tine
    I have 3 columns. Column A shows positive result and if the result is negative then it is in a column B. Column B shows negative result and if the result is positive then it is in a column A. (meaning that either columns can have 0.00 in the cell (empty zero cells)). Column C has starting assets and it also shows the current balance that while result A or B are adding up and current balance is showing the current result. What is the proper formula for this I hope I was clear with my problem. Please help. Thanks in advance!

    Read the article

  • VMware - Watching multiple virtual machine screens

    - by mr.b
    Hi, I don't know even if I put the question right, but here's what I'd like to accomplish. I have avoided specifying exact Vmware virtualization product here because I'm not sure which one would be most suitable for the task at hand. I am developing an application that works in local network. This application has to run on several computers at the same time, and it's important to me, as a developer and tester, to see (literally) how it behaves at all times on all computers. Is there any way to connect to screens of virtual machines deployed on ESX, ESXi, Sever 2.0, or some other product, so that I can see something like grid of screens, say 4x4 or 6x4 or whatever number of scaled screens, at the same time? Ability to interact with screens directly from grid (by double-clicking a screen, for instance, and then getting full resolution screen) would be greatly appreciated, of course. I hope that someone understood what I meant here. :)

    Read the article

  • ioncube not load after upgrading to php 5.4

    - by amir
    i am afraid that i broke somthing in my vps :/ i hope you can help me. i am on ubuntu-12.04-x86. and i moved to new vps so i tryied to upgrade the php to the news version from 5.3 to 5.4. anyway after installing i get this messages: fild loading /usr/lib/php5/20090626+lfs/ioncube_loader_lin_5.3.so /usr/php5/20090625+lfs/ioncube_loader_lin_5.3.so: undefined synbol: php_body_wri php 5.4.8-1~presise+1 (cli) (built(oct 29 2012) i need to mention that the server is working and php also working but when i do phpinfo there is no "with the ionCube PHP Loader v4.0.14, Copyright (c) 2002-2011, by ionCube Ltd." which was before :/ i installed with this guide:http://www.upubuntu.com/2012/03/how-to-upgrade-install-php-540-under.html i need to worry?

    Read the article

  • Sound problems in Windows 7

    - by Plastkort
    hi! I hope I reached the correct forum for this question. I have a media computer with a third party audio card (Soundblaster audigy SE) I use a coaxial digital audio cable connected to a Onkyo TX SR508. if I use normal audio, the sound seems very low, I have to set volume atleast to 62 in my amplifier to hear anything, however if I set digital SPDIF I have no means of controlling the audio volume from the PC (only from the amplifier) and this can be nasty if I toggle between movies that uses Digital AC3/THX and movies wihtouth, if I look at movies capable of AC3 the volume gets VERY loud if amp is set to 62, 32 is more than enough volume when using passthrough. so this bothers me is how can I get the same amount of volume with or without digital output? I tried also other soundcards, internal red light Digital audio cable... if I connect to my television I get ok sound on any sound source via HDMI... help :)

    Read the article

  • How do I SCP/FTP to a Coraid SR2421

    - by Pitto
    I need to save data to a Coraid SR2421. I am no expert and I'm trying to understand how this costy piece of hardware works. All I have is a Ethernet cable connecting my laptop and the coraid to a switch and the coraid's console with cursor blinking. Any kind of help would be greatly appreciated. edit and further explanation: I've tried using software on the coraid website but It's not working. So I've contacted the support and they sent me a file to upload on the coraid. It looks like if I upgrade coraid's firmware then I'll be able to use the coraid software on the windows side. That's why I'd need SCP/FTP or any kind of solution to copy a file in the partition that can be read from coraid console command line so I can launch the update command as requested. I hope I was a bit clearer now.

    Read the article

  • Active Directory remote versus local computer logon

    - by Jake
    Hi, Hope some one can help a network/server noob understand how domains work in AD. I am in an organisation with 2 AD servers in 2 different countries, e.g. US and UK, and they set up the US and UK domains respectively. the accounts are set up such that all employees in both countries have a US\user and UK\user account. What is the difference if a UK user logon with US\user from a local UK computer, versus RDP (remote desktop) into a US server with US\user? Thanks for your help.

    Read the article

  • Purpose of JBoss tables

    - by Rich
    Hi Can anyone point me in the direction of some documentation (or provide the information here) about the following tables, created by JBoss 5.1.0 when it starts up? I know what they are for at a high level, and know why they are there, but I could do with some lower-level documentation about each table's purpose. The tables are: hilosequences timers jbm_counter jbm_dual jbm_id_cache jbm_msg jbm_msg_ref jbm_postoffice jbm_role jbm_tx jbm_user I know that the first two are associated with uuid-key-generator and the EJB Timer Service respectively, while the rest are associated with JBoss Messaging. What I want to know is something along the lines of "jmg_msg stores each message when it is created...", that kind of thing. I wasn't sure where to ask this question, ServerFault or StackOverflow, but I decided it wasn't programming related so thought I should put it here - I hope that's ok! Thanks Rich

    Read the article

  • AutoMatically Creating New Sites When New Users Sign Up

    - by Eddy Freeman
    I would like to know how hosted eCommerce sites like www.shopify.com, www.3dCart.com etc.. automatically creates new sites when new users sign up. What kind of tools do they use to create those sites into the users profile. I have tried googling but couldn't find an answer. Does any of you guys have any knowledge or experience that you can share with me? Or do you know a tutorial that you can point me to? I hope my question is clear. Thanks for your help.

    Read the article

  • Computer freezes +/- 30 seconds, suspicion on SSD

    - by Robert vE
    My computer freezes for about 30 seconds, this happens occasionally. When it happens I can still move the mouse, sometimes even alternate between tabs in google chrome. If I try to open windows explorer nothing happens. Also chrome rapports "waiting for cache". It also happens in starcraft II, during which the sounds loops. I have made a Trace as this topic describes: How do I troubleshoot a Windows 7 freeze or slowness? Trace: https://docs.google.com/open?id=0B_VkKdh535p6NklhSDdBLURUMnc I have looked at it, but I couldn't figure it out. My system specs are: AMD Athlon X4 651 Asus Ati HD6670 ADATA SSD sp900 Asus f1a55 mainboard 4 GB crucial 1333 ram 500 watt atx ps I'm running Windows 7, fully updated. Any help is much appreciated. Update: I tried something before your reply that may have helped the problem. I don't know for sure if it has, it's too soon to tell. A bit of history first. I had problems installing win7 on my ssd from the start. In IDE mode it worked, but I had the same problems as above. AHCI was a total fail, with it on before install as well as turning it on after install (including tweaking register). I didn't bother installing the AMD chipset/AHCI as it was reported to have no TRIM function and thus make problems worse. Eventually I did install the AMD SMbus driver as the stability issues were driving me crazy. It worked, no more issues, until I installed some extra drivers and software. Audio/LAN/ASUS suite, I don’t see the relation, but somehow it screwed up my system again. As a last effort I posted here on this site. After which the thought occurred to me turn on AHCI again as by now I had all necessary drivers installed anyway. (plus all windows updates downloaded/installed in the meantime) I did and stability didn’t seem great the first few reboots, but eventually everything seemed to work great. I tried to play starcraft II – an almost guaranteed freeze before – and I had no problems. I’m basically crossing my fingers and hope the problem is gone for good. I still think it has something to do with my SSD. In my research into the problem I noticed a lot of these issues with sandforce 2281 firmware, the exact same firmware I have. People reported the same problem that I had, freezes. Additionally they reported that during a freeze the hdd light stayed on, I noticed after I read this that this happened with my computer as well. None of this is conclusive evidence that my SSD is really to fault, but it is suspicious. And why turning on AHCI would fix it I don’t know. Thank you Tom for taking a look, if the problem returns I will certainly do what you advised.

    Read the article

  • How to report a malicious site to Google, Microsoft, Mozilla, etc. so that they will warn users

    - by Jayapal Chandran
    I completed a project a year ago. Now a few modification were needed. While trying to test the site, there was an index.html file with a malicious script which had an iframe to another site's jar file. Kaspersky antivirus blocked it. I browsed via ftp to find the file and I deleted it. I also disabled directory listing. Maybe the ftp details of the site owner would have been hacked. I want to report this site to Google, Microsoft, Mozilla, and other antivirus providers. How do I do that? I hope kaspersky would have updated it in their database, but I still want to explicitly report this. Here is the popup kaspersky showed:

    Read the article

  • TV network capabilities.

    - by Narcolapser
    Question: Can the major TV producer's internet TV systems access network resource? Info: I'm looking for large TV's right now for my company to set up in conference rooms. We want the ability to load presentations with out having to have a computer to do so. Our hope is to put things on to network drives and access and display them from there. I've heard that LG's can do this if you convert the power point file in to a show format. that's fine. I just need to get this information to the TV with out the computer attached. Can anyone tell me if companies like LG, Vizio, Sony, Samsung, etc. have TV's that are capable of doing this? Thanks ~n

    Read the article

  • Is an eee-pc with an Atom N550 dual core OK for Rails 3 development?

    - by dan
    I'm buying an Asus eee-pc 1015PEM and hope to do test-driven Rails 3 development on it. Is the CPU fast enough or too painfully slow for this? I plan on installing Ubuntu. I currently develop on a 11 inch Macbook Air 2010 model. It works fine as a Rails development machine. But for some reason I'm drawn to developing on a cheap little netbook. I don't use any IDE's, and my development workflow is mostly switching between Vim, Gnu Screen, and bash.

    Read the article

  • Simplest way to shrink transaction log files on a mirrored production database

    - by MGOwen
    What's the simplest way to shrink transaction log file on a mirrored production database? I have to, as my disk space is running out. I will make a full database backup before I do this, so I don't need to keep anything from the transaction log (right? I have daily full database backup, probably never need point-in-time restore, though I'll keep the option open if I can - that's all the .ldf is really for, correct?). (Hope this isn't an exact duplicate, I read a lot of questions but couldn't find this exact scenario elsewhere).

    Read the article

  • Howto boot directly into a VirtualBox image?

    - by mawimawi
    I have a running setup as following: Native OS: Windows 7 64bit, 3 Partitions: c: (System) d: (FAT32, here is my vdi file) e: (unformatted) VirtualBox: Fedora 14 running off the vdi file on drive d. Usually this setup is great for me, but sometimes I'd like to run Linux natively, and not inside VirtualBox. Is there a way to boot directly into the vdi file without the Windows overhead? E.g. using a USB stick with some modified Linux Kernel / GRUB that can mount the vdi file directly as "/"? Or copy the contents of my vdi file to the empty partition and somehow use this from VirtualBox (when booting into Windows) AND directly booting into Linux? Hope to get some hints or even howtos.

    Read the article

  • Howto boot directly into a VirtualBox image?

    - by mawimawi
    I have a running setup as following: Native OS: Windows 7 64bit, 3 Partitions: c: (System) d: (FAT32, here is my vdi file) e: (unformatted) VirtualBox: Fedora 14 running off the vdi file on drive d. Usually this setup is great for me, but sometimes I'd like to run Linux natively, and not inside VirtualBox. Is there a way to boot directly into the vdi file without the Windows overhead? E.g. using a USB stick with some modified Linux Kernel / GRUB that can mount the vdi file directly as "/"? Or copy the contents of my vdi file to the empty partition and somehow use this from VirtualBox (when booting into Windows) AND directly booting into Linux? Hope to get some hints or even howtos. EDIT: yes, sorry. not programming related. I posted the question to serverfault.com (hopefully that's the better site for my question.)

    Read the article

< Previous Page | 113 114 115 116 117 118 119 120 121 122 123 124  | Next Page >