Search Results

Search found 4934 results on 198 pages for 'math round'.

Page 117/198 | < Previous Page | 113 114 115 116 117 118 119 120 121 122 123 124  | Next Page >

• How to statically configure DNS servers on a Cisco router when the WAN interface uses DHCP?

  - by Massimo

  I have a Cisco router (model 887VA, IOS 15.4) used to connect a LAN to the Internet via ADSL. The WAN interface uses DHCP: interface ATM0.1 point-to-point ip address dhcp I need the router to use a statically-defined DNS server for name resolution: ip name-server A.B.C.D However, the router insists on using the DNS servers supplied by the ISP via DHCP: Router#ping www.google.com Translating "www.google.com"...domain server (<ISP DNS>) [OK] Type escape sequence to abort. Sending 5, 100-byte ICMP Echos to 173.194.116.208, timeout is 2 seconds: !!!!! Success rate is 100 percent (5/5), round-trip min/avg/max = 44/45/48 ms How can I tell the router to ignore the ISP-supplied DNS servers and only use the statically-configured one?

  Read the article

• Web based console connections not working in Windows 7 posted: Jan 20, 2010 8:55 AM

  - by nmeth

  For slightly complicated reasons we tend to give people console access to VMs via the webui. This has worked fine in the past, however when the users update their client machines to Windows 7 (or Vista, I am told, although I have not tested that), then the console fails to work. On IE8, having allowed the ActiveX control, the tab causes a "Internet Explorer has stopped working" dialog. On Firefox 3.5 , once the plugin has been installed, using the console causes the browser to crash. I've updated to the most recent VC 2.5 release, and ESX 3.5u5. Anyone else seeing this? Any clues how to get round it (other than using the fat client). Nigel.

  Read the article

• microsoft mouse and keyboard center doesn't show my mouse

  - by Andy

  as part of a recent windows update, the irritating and intrusive intellipoint microsoft mouse software now seems to have been replaced by the even more irritating and intrusive "microsoft mouse and keyboard center[sic]" I am left handed and need to switch the left and right mouse buttons round. the option to do this has disappeared from the mouse control panel, to be replaced by a link which opens up said mouse and keyboard center. this in turn is a window which allows me to change settings on the keyboard but does not have any way to control mouse settings any hints would be very welcome. this is driving me nuts.

  Read the article

• IIS 6 Ram Allocation on Windows Server 2003

  - by chris

  0 down vote favorite share [g+] share [fb] share [tw] I have my IIS 6 running my website. It is on a Windows Server 2003 which has 4GB of RAM. I run SQL intensive code after the user submits a form (math statistics stuff). This process is not threaded (should it be, especially if 2 or more users run the same thing?). But my process seems to consume only a couple of GBs of memory and the server crawls. How do I get my IIS process to use nearly all the memory? I see on other sites that its 2GB or 3GB allocated using boot.ini. But is there another way for the process to use memory? If I make it multithreaded, will there be a process for each thread?

  Read the article

• Static when metal USB plug touches my case, and other electrical problems.

  - by Archagon

  I have an aluminum PC case. Whenever the metal USB plug from my external drive contacts the front, I get crackling from my speakers, which are connected to an external USB soundcard. (This crackling happens even if they're not connected to the actual output jack.) A few possibly related problems: my audio occasionally starts popping once every few minutes, and my USB devices sometimes play the "connected" sound in Windows even though they're already connected, as if they're briefly disconnecting. My guess is that this has to do with the grounding, but I'm not sure exactly what to do. My case has a round grounding wire, but I don't know where to attach it, and fiddling with it didn't seem to have any effect. Suggestions?

  Read the article

• error 0x80070522. not able to create a file in c:\ directory

  - by Abbas

  Hello Everybody... "error 0x80070522. not able to create a file in c:\ directory" One of our customers has just found a problem when trying to create a file on the root of the C:\ Drive, on a Windows 7 Professional PC. I know they shouln't be keeping files here, but there is a valid reason in this case, so I've relaxed the security on the root of C:\ by giving the group 'users' modify permission. Before I relaxed the security, the user was receiving 'access denied', but now they are receiving the message: An unexpected error is keeping you from creating the file. If you continue to recieve this error, you can use the error code to search for help with this problem. Error 0x80070522: A required priviledge is not held by the client. Googling for this suggests that it is caused by UAC, but how can I get round this when the user doesn't have admin rights on their PC? So did you find a solution for this issue ?? Please its urgent to my accountant software..

  Read the article

• negative time for a ping echo reply

  - by Mario

  I was happily pinging in the net when suddenly: Pinging X with 32 bytes of data: Reply from .235: bytes=32 time=1444ms TTL=41 Reply from .235: bytes=32 time=1767ms TTL=41 Reply from .235: bytes=32 time=1531ms TTL=41 Reply from .235: bytes=32 time=-1198187ms TTL=41 Ping statistics for .235: Packets: Sent = 4, Received = 4, Lost = 0 (0% loss), Approximate round trip times in milli-seconds: Minimum = 1444ms, Maximum = -1198187ms, Average = 1073443462ms A negative time for the reply. I checked wireshark and it had the same values: Time delta from previous displayed frame: -1198.187867000 seconds Time since reference or first frame: -1179.935038000 seconds I didn't change the time of the machine while pinging. This was made in my local network at home, from a XP VM in windows 7. So I blame the VM (virtualbox). But I was wondering if this strange behaviour (to me) could have a reason, or if any of you have seen this before. Thank you bye.

  Read the article

• Maximum MTU size

  - by user192702

  Thought one of the issues I'm experiencing with the following question is due to MTU rightfully so. ESXi 5 VM Putty session hangs, vSphere client timing out However, when I tried testing the maximum MTU size it seems there's just no limit. Thought Ethernet only allows maximum MTU. But I'm up to 54450. ping -l 54450 192.168.10.7 Pinging 192.168.50.7 with 54450 bytes of data: Reply from 192.168.10.7: bytes=54450 time=1081ms TTL=62 Reply from 192.168.10.7: bytes=54450 time=1079ms TTL=62 Reply from 192.168.10.7: bytes=54450 time=1079ms TTL=62 Reply from 192.168.10.7: bytes=54450 time=1079ms TTL=62 Ping statistics for 192.168.10.7: Packets: Sent = 4, Received = 4, Lost = 0 (0% loss), Approximate round trip times in milli-seconds: Minimum = 1079ms, Maximum = 1081ms, Average = 1079ms

  Read the article

• Sending from alternative addresses in Exchange

  - by Sam Cogan

  One of the most frequent requests I get from users with Exchange, is to be able to send from one of their alternative email addresses, that is one of the addreses there account is configured with in Exchange, but that is not their primary address. Unfortuantely as far as I am aware Microsoft have not yet come up with a solution to this. I've used a number of hacks to get round this, sepearate accounts with POP3 access, Using the from field in outlook, but each have there draw back. What have you used in these situations to allow the use of these alternative addresses?

  Read the article

• Munin Aggregate Graphs from several servers

  - by Sparsh Gupta

  I am using DNS round robin load balancing and have divided my total traffic onto multiple servers. Each server does around 300-400req/second but I am interested in having an aggregate graph telling me the TOTAL of all requests per second served by our architecture. Is there any way I can do this. Right now each graph in Munin comes as a separate graph as they depict things on one server. I am using configuration as follow which doesn't work doesnt work for me, does this configuration got errors? [TRAFFIC.AGGREGATED] update no requests.graph_title nGinx requests requests.graph_vlabel nGinx requests per second requests.draw LINE2 requests.graph_args --base 1000 requests.graph_category nginx requests.label req/sec requests.type DERIVE requests.min 0 requests.graph_order output requests.output.sum \ lb1.visualwebsiteoptimizer.com:nginx_request_lb1.visualwebsiteoptimizer.com_request.request \ lb3.visualwebsiteoptimizer.com:nginx_request_lb2.visualwebsiteoptimizer.com_request.request \ lb3.visualwebsiteoptimizer.com:nginx_request_lb3.visualwebsiteoptimizer.com_request.request

  Read the article

• How can one convert a Word form to a PDF form while preserving fields?

  - by Ben Collins

  I have a Word source document which I'm using to create a PDF form. The first go-round, everything is fine because I can let Acrobat Pro auto-create all the fields. That feature is actually pretty awesome. However, after spending a bunch of time adjusting field sizes and alignments and formats and so on, I want to edit the source document, and now I'm faced with the prospect of doing all that over again. Isn't there some way to add the fields in the source document using the Developer ribbon and have those fields be preserved in the conversion to PDF? If not, what other ways are there to avoid this kind of redundant effort?

  Read the article

• http server connectivity puzzle

  - by jpmartins

  I have been seeing some strange connection issue in the production environment. The setup has two IBM Http Server's (IHS) and a network IP load-balancer in front of them (round-robin). One instance the system is working fine, the next requests stop arriving at the IHS. Telnet directly to port 80 of the IHS is established sucessfully, but connection to the port 80 through the IP of the load-balancer fails! The puzzle comes next, the network admins say the load-balancer is working fine. When we finally reboot the IHS servers and request start flowing... The situation happened three times the last month and no obvious pattern was found. Any debug ideas?

  Read the article

• How to calculate bandwidth limits per user on WiFi network

  - by Lars

  A typical 802.11g access point can provide around 25 Mbps of bandwidth. How is the bandwidth shared among the users? Furthermore, how many users can be served by a single access point using 802.11g in an environment with low interference, and average web activity from the users? The goal is to use bandwidth limitation to avoid starvation for some users in case some of the users start to download a file or stream HD video or some other bandwidth intensive activity. Can someone break down the math on this?

  Read the article

• Windows 7 unload driver/disconnect usb before restart

  - by brux

  In xp, my Tascam US 122 usb audio interface works fine. On my windows 7 computer the device works, however when i restart/shutdown it hangs at the "shutting down" screen forever. If the usb cable is removed prior to initiating restart/shutdown then everything goes fine, the computer restarts as normal. This is a known problem, running any other driver in compatibility mode doesnt fix the problem. Is there a method I can use to unload the device/drivers so that I dont have to reach round physically and disconnect the cable. Somebody suggested a spdt switch on the cable itself, but I am looking for a simpler method. Surely I can automate the unloading of the device through a script or such? Any ideas are greatly welcomed thanks

  Read the article

• Error message when renaming files on a network drive stored in Windows 7 favorites

  - by paulmorriss

  I have a network drive mapped to a share on a Window Server 2003. I have a shortcut to this drive stored in my Windows 7 favorites. When I double click the shortcut and then rename a file on the drive, if the file is longer than 8 chars or contains spaces then I get this error The drive that this file or folder is stored on does not allow long file names, or names containing blanks or any of the following characters:... If I get to the network drive by click on it in the tree under computer then it works fine. Is there a way to get round this?

  Read the article

• Highly Available Web Application (LAMP)

  - by Anthony Rizzo

  I work for a small company who provides a web application for thousands of users. Earlier this year they had one server hosted one company. We recently acquired another server in a different location with the hopes of one day making this a redundant failover machine. I understand what to do with the mysql replication, I plan on using a master-master replication setup, and rsync to sync the scripts and files, however I am at a stand still about how to configure the fail-over. Ideally I would like the two machines to accept requests, like a round robin dns, however if one machine goes down I do not want requests to go that machine. All of the solutions I am come across assumes high availability of servers in the same location, these servers are in two completely different locations with different public ip address. Any help would be great. Thanks

  Read the article

• How do I correct the kernel version loaded by Grub2 in Ubuntu 12.04

  - by Paul D'Ambra

  I have a linux vps running Ubuntu 12.04 and when I run uname-r it replies: paul@webforms:~$ uname -r 2.6.32.33-kvm-i386-20111128-dirty paul@webforms:~$ sudo grub-install -v grub-install (GRUB) 1.99-21ubuntu3.1 if I run update-grub I get: paul@webforms:~$ sudo update-grub Generating grub.cfg ... Found linux image: /boot/vmlinuz-3.2.0-26-generic-pae Found initrd image: /boot/initrd.img-3.2.0-26-generic-pae Found linux image: /boot/vmlinuz-2.6.38-15-generic-pae Found initrd image: /boot/initrd.img-2.6.38-15-generic-pae done and then rebooting gives me the same dirty kernel I'm going round in circles and as a relative noob I'm sure I must be missing something obvious so over to the hive-mind!!

  Read the article

• Want to SASL/TLS authentication

  - by Naval

  I want to send mail from remote client from my server(centos 5 and 64 bit) for this i need to sasl auth but i have no idea about it what changes i have to make in my server and client here I want to make things more clear my server's hostname/Ip is = test02.s80.in/176.67.172.209 now i want to authenticat remote client vps2.smail.info and vps1.smail.info to deliver mail .. so plz help me if any systematic way to do sasl/tls authentication for these clients... i am using DNS load-balancing(round-robin) mx record lookup technique for load balancing..

  Read the article

• Ways to do simple failover with one server and two IPs

  - by CrassHoppr

  The setup is one server (Windows 2008) at one location with two incoming connections. As the server has to interface with various on-site devices, and will have a small number of incoming connections, a data center is not an option, and instead cable/dsl connections must be used. The goal is that users visit https://service.site.com and are sent to either the primary IP address or a secondary IP if the primary is down. I've seen advice to use round robin DNS for this, but caching an IP for a downed interface is something I'd like to avoid. Is something like this possible with these constraints?

  Read the article

• Help me understand how Xen vCPU/CPU works

  - by luckytaxi

  Say I have a Dual-Core server, that's 4 cores w/ two physical processors. I read numerous articles that states the dom0 should get one physical core to itself. By core, does that mean a single CPU core or one of the 4 logical cores? Ideally I would like to dedicate a single CPU core (2 logical) to the dom0. Then I would give the other CPU split between the 3 VMs. I've seen examples where ppl would assign more than the available number of cores to a VM and I don't know what good that would do. I mean, why would I want to assign 4 vCPU to a single VM when I only have 2 available (if my math is correct)? I assume I only have 2 available from the one core as I've given dom0 a CPU to itself.

  Read the article

• IRC Services with failover support?

  - by insertjokehere

  I run a single server (call it 'server A') IRC 'network', and thank to the generosity of some friends, I have been given a second server ('server B') that I can run an IRCd on in order to provide redundancy in case server A crashes. This is fine, I can set up a round-robin DNS with the servers linked. The problem I have is what to do about services? Does anyone know of a way to get the services to 'fail over' in case of a server failure? Eg, Server A starts off running the services, but suddenly crashes. Server B detects this and starts its own copy of the services (ideally with the same configuration and data as the services on Server B) One solution that comes it mind is to write a bot that each server runs, that sit in a channel periodically checking if the bot from the other server is in the channel. If it is, then all is well. If not, then failover. I would prefer not to have to code this myself though We are currently using Unreal IRCd and Anope services on Linux

  Read the article

• Sorting IPv4 Addresses

  - by Kumba

  So I've run into a quandary on sorting IPv4 addresses, and didn't know if there was a set rule in some obscure networking document. Do I do a straight sort on the raw address only (such as converting the IP address to a 32bit number and then sorting), do I factor in the CIDR via some mathematical formula, do I sort via the CIDR only (as if I'm comparing the network size and not the addresses directly)? I.e., normal math, we'd do something like -1 < 0 < 1 to denote the order of precedence. Given say, 10.1.0.0/16, 172.16.0.0/12, 192.168.1.0/24, and 192.168.1.42, what would be the order of precedence?

  Read the article

• SharePoint 2010 MySites - Simple explanation needed!

  - by Chris W

  I've been playing around with the 2010 beta for a couple of weeks, experimenting with topology options etc. I think I've got myself totally confused as to how it works hence if there's any SP experts out there that can explain things in simple terms for me I'd appreciate it! I want to setup a farm with 3 servers providing the content & MySites. I presume that the way to do this is to load balance or DNS round robin traffic between the 3 servers. The bit where I'm confused is that My Site Settings page asks for a specific My Site Host hence all my site traffic will be pushed to a single server even though we have 3 in the farm. If this hosts fails I presume MySites will be unavailable. Is this right? How do I configure it so that access to MySites is load balanced across the 3 servers in the farm?

  Read the article

• Session persistence between multiple Rails / Unicorn servers with Redis as session_store on AWS

  - by d_ethier

  I've got 2 nginx EC2 instances pointing to 2 Unicorn EC2 instances in a round robin load balanced configuration. The two nginx instances are being the Elastic Load Balancer. Both Unicorn instances have a Redis session_store configured which is in a master/slave configuration with an Elastic IP attached to the master. I've tried configuring the session stickiness on the load balancer, but sessions are lost on each page refresh. I'm using the redis-store gem for the session_store configuration and redis support. Anyone have any ideas as to why this is not working?

  Read the article

• Windows 7 x64 Hard Freezing (again)

  - by Lanissum

  Awhile ago, my computer was randomly freezing a few minutes after booting, and I ended up replacing the CPU and mobo after testing the RAM and hard drive, I also couldn't find anything wrong with the video card. So after replacing the presumably faulty hardware, everything worked fine for about a month and a half. All of a sudden, My computer is randomly freezing a few minutes after loading up any intensive application (games, mostly). Most of the time it just freezes with the current frame until I hard reset, although once it printed a BSOD message stating that dxgmms1.sys was to blame. The only difference between these two episodes I can think of is that I can do word/internet/work without issue now, as opposed to the near uselessness my computer was rendered last time. For those of you who want to know, I tested my memory with memtest86 (for 64 bit machines). I can't figure out what could have started this latest round of issues, the event logger just states that a kernel-power event has occurred (like last time) but I think thats just a generic "this machine has rebooted after a sudden shutdown" message.

  Read the article

< Previous Page | 113 114 115 116 117 118 119 120 121 122 123 124  | Next Page >