Search Results

Search found 4520 results on 181 pages for 'notice'.

Page 117/181 | < Previous Page | 113 114 115 116 117 118 119 120 121 122 123 124  | Next Page >

• What differences are there between "home" switches and "professional" switches?

  - by pjreddie

  Our radio station uses a PtP wireless system to stream our radio and TV signals from our studio up a hill to our transmitter. We have been having problems with warbly sound and drop outs that come from some point in this system. An engineer that occasionally visits the station thinks it could be the switches we use on each side of the PtP wireless system to connect the PtP devices to the encoders and decoders and wants us to get two of these switches: http://www.amazon.com/Netgear-JGS516-ProSafe-16-Port-Ethernet/dp/B0002CWPOK/ref=dp_return_1 The encoder/decoder setup only streams 8Mbps total so it seems like the switches we have should not be stressed out, unless they are causing sufficient latency to degrade the performance of the encoder/decoder. At each end of the connection we only have 4 connections, is there any reason we couldn't get a cheaper, "home" quality switch like this: http://www.amazon.com/D-Link-DGS-1005G-5-Port-Gigabit-Desktop/dp/tech-data/B003X7TRWE/ref=de_a_smtd Is there a significant difference that we would notice in terms of latency between these two switches? How much does the quality of the switch actually matter in this scenario? Any help is appreciated, feel free to ask questions if anything needs clarification. Thanks

  Read the article

• Cannot access new folders created in my Apache2 document-root

  - by user235101

  I have tried to create a new folder 'test' in my documentroot of my Apache2 installation, however, whenever I try and access it from a web-browser it gives me a 403 (forbidden) error. My virtualhosts file - <VirtualHost *:80> ServerAdmin webmaster@localhost ServerName REMOVED DocumentRoot /var/www/ <Directory /> Options FollowSymLinks AllowOverride All AuthType Digest AuthName "documentroot" AuthDigestProvider file AuthUserFile /etc/apache2/htpasswd Require user REMOVED AllowOverride Indexes </Directory> <Directory /var/www/> Options FollowSymLinks Options -Indexes FollowSymLinks MultiViews AllowOverride All Order allow,deny allow from all </Directory> <Directory /var/www/share/> Order Deny,Allow Allow from all Satisfy any </Directory> <Directory /var/www/REMOVED/> Order Deny,Allow Allow from all Satisfy any </Directory> <Directory /var/www/stream/> Order Deny,Allow Allow from all Satisfy any </Directory> <Directory /var/www/test> Order Deny,Allow Allow from all Satisfy any </Directory> ErrorLog /var/log/apache2/error.log # Possible values include: debug, info, notice, warn, error, crit, # alert, emerg. LogLevel warn CustomLog /var/log/apache2/access.log combined <Directory /var/www/REMOVED> AuthType Digest AuthName "rutorrent" AuthDigestDomain /var/www/REMOVED/ http://46.105.127.19/REMOVED AuthDigestProvider file AuthUserFile /etc/apache2/htpasswd Require valid-user SetEnv R_ENV "/var/www/REMOVED" AllowOverride Indexes </Directory> </VirtualHost> Image of the permissions - Other information - If I create a new folder (and use chmod --reference to ensure it has the same permissions as an accessible folder), I get a 403 client-side. If I copy folder 'rapidleech' to the name 'rapidleech1', it will let access 'rapidleech1', but no longer 'rapidleech', until I delete the copy. In my logs I found nothing logged in errors.log, and only that it delivered a 403 in access.log. All the appropriate users are members of www-data.

  Read the article

• Updating ASUS BIOS on Windows 7 64bit

  - by joesavage

  I've recently decided that I want to try and utilize my two graphics cards so that I can have a dual monitor setup. Unfortunately Windows only seems to notice my most recent graphics card installation - and so I've been told that I should look into my BIOS and try to enable two graphics cards. I could not find this setting anywhere in my M2N68-AM Plus v0210 BIOS. After some further research I figured that I should perhaps upgrade my BIOS, so I searched and managed to download the latest version (v1804) as a ROM file. However I am having difficulty figuring out how to install it. I've tried using the Asus EZFlash feature built into my BIOS, but when trying to load up a variety of different ROMs that are for my motherboard/BIOS I get the error: Boot block in file is not valid! I'm not totally sure what I should do to fix this, so I'm looking into other methods of upgrading my BIOS - however I can't really find any solutions that seem to work. Asus Update is for 32-bit only, AFUDOS doesn't appear to work on my Windows 7 64-bit system (I think it's supposed to run in DOS or something - but that just sounds confusing since I know nothing about DOS). Could anybody help me with this?

  Read the article

• Securing phpmyadmin: non-standard port + https

  - by elect

  Trying to secure phpmyadmin, we already did the following: Cookie Auth login firewall off tcp port 3306. running on non-standard port Now we would like to implement https... but how could it work with phpmyadmin running already on a non-stardard port? This is the apache config: # PHP MY ADMIN <VirtualHost *:$CUSTOMPORT> Alias /phpmyadmin /usr/share/phpmyadmin <Directory /usr/share/phpmyadmin> Options FollowSymLinks DirectoryIndex index.php <IfModule mod_php5.c> AddType application/x-httpd-php .php php_flag magic_quotes_gpc Off php_flag track_vars On php_flag register_globals Off php_value include_path . </IfModule> </Directory> # Disallow web access to directories that don't need it <Directory /usr/share/phpmyadmin/libraries> Order Deny,Allow Deny from All </Directory> <Directory /usr/share/phpmyadmin/setup/lib> Order Deny,Allow Deny from All </Directory> # Possible values include: debug, info, notice, warn, error, crit, # alert, emerg. LogLevel warn CustomLog ${APACHE_LOG_DIR}/phpmyadmin.log combined </VirtualHost>

  Read the article

• error 503: Can't deploy rails 3 app with apache + thin (bitnamy ruby stack)

  - by Pacu

  As you'll notice, I'm a bit of a noob on Rails. Here's the thing I have a EC2 Bitnami RubyStack AMI running. I'm trying to deploy the sample project to be sure I'm doing the right thing, but I'm not getting anywhere at all. I just get a 503 error I'm following bitnami's docs on thin + apache Here are my files: the httpd.conf I include in the main httpd.conf Alias /sample "/home/bitnami/stack/projects/sample/public" <Directory "/home/bitnami/stack/projects/sample/public"> AllowOverride None Order allow,deny Allow from all </Directory> ProxyPass /sample balancer://appcluster ProxyPassReverse /sample balancer://appcluster <Proxy balancer://appcluster> BalancerMember http://127.0.0.1:3001/sample BalancerMember http://127.0.0.1:3002/sample BalancerMember http://127.0.0.1:3003/sample BalancerMember http://127.0.0.1:3004/sample </Proxy> the thin.yml file chdir: /opt/bitnami/projects/sample environment: production address: 127.0.0.1 port: 3000 timeout: 30 log: log/thin.log pid: tmp/pids/thin.pid max_conns: 1024 max_persistent_conns: 512 require: [] wait: 30 servers: 5 prefix: /sample daemonize: true I'm able to start and stop apache, but thin does not stop correctly though. When I try to stop thin, I get this output /opt/bitnami/projects/sample$ sudo thin -C config/thin.yml stop Stopping server on 127.0.0.1:3000 ... Can't stop process, no PID found in tmp/pids/thin.3000.pid Stopping server on 127.0.0.1:3001 ... Can't stop process, no PID found in tmp/pids/thin.3001.pid Stopping server on 127.0.0.1:3002 ... Can't stop process, no PID found in tmp/pids/thin.3002.pid Stopping server on 127.0.0.1:3003 ... Can't stop process, no PID found in tmp/pids/thin.3003.pid Stopping server on 127.0.0.1:3004 ... Can't stop process, no PID found in tmp/pids/thin.3004.pid I've tried to use nginx as well, without any luck unfortunately. Thank you for your time and help!

  Read the article

• One Way Sync with Dropbox?

  - by user244805

  Is there any way I can mirror a dropbox folder to my C drive by just running a portable file? Extra background information because I know you guys hate it when you don't get the entire situation: I go back to University in fall and I need a new storage solution. I decided to use DropBox to sync my tiny University files (< 5 MB). I need to access these files from 4 machines: Windows 7 Home machine Windows 7 University A machine Windows 7 University B machine Android tablet 1 and 4 are a non-issue. The problem lies with 2 and 3. I want to be able to edit my files on 2 and 3 but those machines are not mine. There is an easy fix. Run a portable version of the DropBox syncer on a USB drive. But the problem is that I don't want to carry a USB drive around with me all the time. In that case, I can just run the small portable DropBox syncer off the internet. But where will it to store the files? A temporary directory on the C drive. There is only one issue left: there are hundreds of machines that I will randomly use that fit in categories 2 and 3. My portable DropBox syncer will notice that the temporary directory is empty on each new PC I use and instead of downloading my DropBox folder to the machine, it syncs the other way around i.e. it deletes my entire DropBox. The solution is to mirror my DropBox onto the temporary directory before running the DropBox syncer.

  Read the article

• Can a non-redundant RAID5 cause any serious problems (compared to RAID0)?

  - by leemes

  I used to have a three-disc RAID5 (mdadm) in my computer for personal media storage (music, videos, photos, programs, games, ...). It had three discs with 750 GB each, resulting in an array capacity of 1.5 TB. One day (one year ago), I needed one of those discs to install another operating system. I thought, I don't need the redundancy anymore since I backup the most important stuff (personal photos e.g.) on an external disc anyway. So I decided to remove one of the three discs without converting the RAID to RAID0 or even two separate discs, because I had no temporary storage (since one cannot simply convert the RAID5 to RAID0 AFAIK). So now, for about one year, I have a non-redundant RAID5 with 2 of 3 discs running. Sometimes, one of the discs has a defective contact at the power cable or something similar causing the drive to stop working temporarily (I don't know exactly what it is). Since it still works when rebooting the computer and in most cases by calling some mdadm commands, it wasn't that problematic. Note that the data is not very critical, since I still have a backup of the most important stuff. But in the last few weeks, one of the drives fails very frequently (every few hours), so it gets really annoying to manage this. My questions are: Is there any disadvantage (apart from the annoying management) of a non-redundant RAID5 (with one drive less than typical) over a RAID0? If I understand it correctly, both have no redundancy and the same capacity. On a temporary drive failure, I can restart the array in both cases, assuming that the drive itself still works after the failure. Can it happen that the drive contents alter on a drive failure, making the array inconsistent? If so, can I tell mdadm to check the array for failures (without a file system level checking tool)? Since the drive most probably only has a defective contact causing it to fail for a second only, can I tell mdadm to automatically restart the array, so I will not even notice the failure if no application wanted to access the file system during the failure?

  Read the article

• Stop Windows 7 from accessing or writing to hard drive unless "told" to by me? (More info inside...)

  - by Jeff

  A confusing question, perhaps, but bear with me. I have two internal HDDs set up in a RAID0 array which I use as mass storage. I access the drive very infrequently (once a day at most) and so I have set up Windows 7's power options to turn off idle disks after only 1 minute. This is fine, and the disks are turned off most of the time. However, I notice that Windows sometimes spins up the drives when I really, really don't want or need it to. This causes a 30 second delay as both drives spin up and lock up my system. Some examples of when this happens: 1) When I'm installing something using Windows Installer or Installshield; it seems to me as if they're using the drive with most available free space as the installer cache location... so my big RAID drive has to spin up! Most annoying. 2) Apparently, when I open a Java-based program which resides on my system drive and has nothing to do with my RAID drive! 3) At boot-up and shut-down time. At shutdown the drive spin up only for the computer to immediately shut down! Incredibly frustrating! I've already tried changing the letter of the drive, and at some points have removed the drive letter entirely, which solves the first two issues above. So my question (FINALLY!) is this: is there any way I can mark this drive as being for "storage only", so Windows basically does not see it at all until I actually invoke it somehow? Or is there any way I could set it up so that only specific programs have write access to it? For example, download managers, TeraCopy, etc. etc.? Basically I want it to be a "ghost drive" until I'm ready to use it and to stop Windows from spinning it up all the damn time! Thank you. :)

  Read the article

• DBCC CHECKDB fails and quits job, ambiguous error message.

  - by ddono25

  I received a notice that one of our servers' DBCC CHECKDB for all databases has been failing the past four times it has been run. We don't have any data prior to that, but it doesn't look like it has been succeeding for awhile. There are no errors in the log file only: DBCC results for 'sys.sysxmlfacet'. [SQLSTATE 01000] Msg 0, Sev 0, State 1: Unspecified error occurred on SQL Server. Connection may have been terminated by the server. [SQLSTATE HY000] There are 112 rows in 1 pages for object "sys.sysxmlfacet". [SQLSTATE 01000] I ran a DBCC CHECKDB using sp_MSForEachDB to get more accurate results and had the same error on the same DB but at a separate point: DBCC results for 'NameValuePair_Greek_CI_AS'. [SQLSTATE 01000] Msg 0, Sev 0, State 1: Unspecified error occurred on SQL Server. Connection may have been terminated by the server. [SQLSTATE HY000] There are 0 rows in 0 pages for object "NameValuePair_Greek_CI_AS". [SQLSTATE 01000] Also, the error-log states that the DBCC completed without errors for this database. I can't figure out how to track down this ambiguous issue that only happens on this database out of the dozens on this server. Any help is appreciated!

  Read the article

• VNC Server that can be used from command line?

  - by jesusiniesta

  I'm looking for a replacement for a custom vnc server that we have been using in my company for a long time. I need a simple executable that can be run from command line by an IT Support software without the user noticing it (our application will warn the user, we don't want him to see we are using that VNC sever). I need it to support Windows and preferably also OSX. The only option I've found is UltraVNC, but I can't configure it from command line to accept loopback connections without authentication. We have already a whole VNC Viewer + VNC Repeater + Bouncers architecture, and the only missing piece is the VNC Server. Do you know any solution you could suggest me? I'm afraid I'll end up developing a new VNC server myself, may be based on an open source one. EDIT: When I said I don't want the user to notice this VNC server, I should have added that I don't want him even noticing the installation. So better if it can be installed silently or can be executed as a portable executalbe (for instance, ultravnc can be installed and ran as a service from command line, or simply executed quietly, with only a notification icon; its problem is that I can't run it without authentication).

  Read the article

• Apache2 403 permission denied on Ubuntu 12.04

  - by skeniver

  I have a sub-directory in my /var/www folder called prod, which is password protected. It was all working fine until I asked my server admin to help me set up allow all access to one particular file. Now the entire folder is just giving me a 403 error. This is the sites-enabled file: <VirtualHost *:80> ServerAdmin [email protected] # Server name ServerName prod.xxx.co.uk DocumentRoot /var/www/prod <Directory /var/www/prod> Options Indexes FollowSymLinks MultiViews +ExecCGI Includes AllowOverride None Order allow,deny AuthType Basic AuthName "Please log in" AuthUserFile /home/ubuntu/.htpasswd Require valid-user </Directory> <Directory /var/www/prod/xxx/cgi-bin/api.pl> Allow from All Satisfy Any </Directory> ScriptAlias /xxx/cgi-bin/ /var/www/prod/xxx/cgi-bin/ ErrorLog ${APACHE_LOG_DIR}/prod.xxx.error.log # Possible values include: debug, info, notice, warn, error, crit, # alert, emerg. LogLevel warn CustomLog ${APACHE_LOG_DIR}/prod.xxx.access.log combined </VirtualHost> Now he's unsure why this is blocking me out completely. No permissions have been changed, but this is the /var/www/ folder: 4 drwxr-xr-x 2 root root 4096 Jan 3 21:10 images 4 drwxr-sr-x 4 root www-data 4096 Mar 31 14:47 jslib 4 drwxr-xr-x 7 root root 4096 Jun 2 13:00 prod When I try to visit http://prod.xxx.co.uk, I don't get asked for the password; I just get 403'd I hope I've given enough information... Anyone able to spot something he can't?

  Read the article

• powershell vs GPO for installation, configuration, maintenance

  - by user52874

  My question is about using powershell scripts to install, configure, update and maintain Windows 7 Pro/Ent workstations in a 2008R2 domain, versus using GPO/ADMX/msi. Here's the situation: Because of a comedy of cumulative corporate bumpfuggery we suddenly found ourselves having to design, configure and deploy a full Windows Server 2008R2 and Windows 7 Pro/Enterprise on very short notice and delivery schedule. Of course, I'm not a windows expert by any means, and we're so understaffed that our buzzword bingo includes 'automate' and 'one-button' and 'it needs to Just Work'. (FWIW, I started with DEC, then on to solaris and cisco, then linux of various flavors with a smattering of BSD nowadays. I use Windows for email and to fill out forms). So we decided to bring in a contractor to do this for us. and they met the deadline. The system is up and mostly usable, and this is good. We would not have been able to do this. But it's the 'mostly' part that is proving to be the PIMA now, and I'm having to learn Microsoft stuff anyway until/if we can get a new contract with these guys for ongoing operations. Here's my question. The contractor used powershell almost exclusively for deployment, configuration and updating. My intensive reading over the last week leads me to think that the generally accepted practices for deployment, configuration and updating microsoft stuff uses elements of GPOs and ADMX templates, along with maybe some third party stuff like PolicyPak. Are there solid reasons that I've not found yet that powershell scripts would be preferred over the GPO methods? I'm going to discuss this with the contractor lead when he gets back from his vacation, and he'll be straight with me (nor do I think they set us up). But I can also see this might be a religious issue, so I would still like some background on this. Thoughts? or weblinks? Thanks!

  Read the article

• vmware player won't run on CentOS due to missing /dev/vmmon, what could be the problem?

  - by Graphics Noob

  So I've tried installing vmware player 3.1.4 and 3.1.3 and both times had the same problem, when I try to load a VM I get the error "Could not open /dev/vmmon". When I ls /dev/ I can see there is no "vmmon" device present. When I try running: sudo /etc/init.d/vmware start I get the output: Starting VMware services: VMware USB Arbitrator [ OK ] Virtual machine monitor [FAILED] Virtual machine communication interface [ OK ] VM communication interface socket family [ OK ] Blocking file system [ OK ] Virtual ethernet [FAILED] which shows that the Virtual Machine Monitor fails to load. I tried following the advice on this site and ran vmware-modconfig --console --install-all I notice during the compilation there are no errors, but at the end I get the message: Starting VMware services: VMware USB Arbitrator [ OK ] Virtual machine monitor [FAILED] Virtual machine communication interface [ OK ] VM communication interface socket family [ OK ] Blocking file system [ OK ] Virtual ethernet [ OK ] Unable to start services Out of curiousity I tried: sudo /sbin/insmod /lib/modules/2.6.18-238.9.1.el5xen/misc/vmmod.ko But got the error message: insmod: error inserting 'vmmon.ko': -1 Invalid module format I have a feeling this may be the root of the problem, but I don't know what could be causing it or how to fix it.

  Read the article

• How can I password protect & let cgi-bin to work?

  - by jaaaaaaax

  This is taken from sites-available directory. It's a virtual host setting for apache. Accessing myiphere/cgi-bin/ throws 403. The directory setting for /var/www2/ drwxrwxrwx 8 www-data www-data NameVirtualHost myiphere <VirtualHost myiphere> ServerAdmin webmaster@localhost DocumentRoot /var/www2/ <Directory /> Options FollowSymLinks AllowOverride None </Directory> <Directory /var/www2/> Options Indexes FollowSymLinks MultiViews AllowOverride None Order allow,deny allow from all </Directory> ScriptAlias /cgi-bin/ /usr/lib/cgi-bin/ <Directory "/usr/lib/cgi-bin"> AllowOverride None Options +ExecCGI -MultiViews +SymLinksIfOwnerMatch Order allow,deny Allow from all </Directory> ErrorLog /var/log/apache2/error.log # Possible values include: debug, info, notice, warn, error, crit, # alert, emerg. LogLevel warn CustomLog /var/log/apache2/access.log combined ServerSignature On Alias /doc/ "/usr/share/doc/" <Directory "/usr/share/doc/"> Options Indexes MultiViews FollowSymLinks AllowOverride None Order deny,allow Deny from all Allow from 127.0.0.0/255.0.0.0 ::1/128 </Directory>

  Read the article

• What is the name of the this DOS font? Where and how to add it? Why is there a 1 pixel gap?

  - by JBeurer

  So basically I somehow stepped into this webpage: www.braindamage.vg And the first thing that hit me hard was the lovely DOS fonts, so naturally I wanted to get them into my IDE badly. Opened the html source file and CSS file to find the font name: @font-face { font-family: 'Perfect DOS VGA 437'; src: url('http://www.braindamage.vg/wp-content/themes/braindamage/dosfont.eot'); } @font-face { font-family: 'Perfect DOS VGA 437'; src: url('http://www.braindamage.vg/wp-content/themes/braindamage/dosfont.svg#dos') format("svg"), url('http://www.braindamage.vg/wp-content/themes/braindamage/dosfont.ttf') format ('truetype'); } So I download the font, add it using Control Panel - Fonts. But once I start using it (notepad, MSVS 2008 & MSVS2010) I notice that it looks slightly off: It seems like there's 1 extra pixel between each character. How it should look: What is causing it and how to fix this? Is it the windows XP? (i have disabled font smoothing) Or is there something wrong with the font file?

  Read the article

• Apache /server-status/ gives a 404 not found

  - by user57069

  I am trying to solve a problem where Apache stats aren't displaying correctly in Munin. I've ran through quite a bit of checks and tests regarding Munin setup, but I think my issue is related to Apache, but my skill set there is lacking. first, system info: monitored server CentOS 5.3 kernel 2.6.18-128.1.1.el5 Apache/2.2.3 "server-status" directive in httpd.conf (i've cross-compared this with another system that i did a successful parallel install of Munin on, correctly showing Apache stats, and the directive below is the same for both) ExtendedStatus On <Location /server-status> SetHandler server-status Order deny,allow Deny from all Allow from 127.0.0.1 </Location> ran lynx http://localhost/server-status got HTTP/1.1 404 taking a look at Apache access_log: 127.0.0.1 - - [13/Oct/2010:07:00:47 -0700] "GET /server-status HTTP/1.0" 404 11237 "-" "Lynx/2.8.5rel.1 libwww-FM/2.14 SSL-MM/1.4.1 OpenSSL/0.9.8e-fips-rhel5" mod_status is also loaded: % grep "mod_status" /etc/httpd/conf/httpd.conf LoadModule status_module modules/mod_status.so iptables is turned off also i did notice that the ownership status on httpd.conf on this system is root.root.. whereas the system that is displaying correctly is apache.www -- not certain that this matters?? its got to be permission issue, but i'm not certain where the permissions are messed up. any thoughts on why the test of server-status is giving me a 404?

  Read the article

• Virtual host doesn't read .htaccess

  - by Charlie

  I just created virtual host: <VirtualHost myvirtualhost:80> ServerAdmin webmaster@myvirtualhost ServerName myvirtualhost DocumentRoot /home/myname/sites/public_html <Directory /> Options FollowSymLinks AllowOverride None </Directory> <Directory /home/myname/sites/public_html/> Options Indexes FollowSymLinks MultiViews AllowOverride None Order allow,deny allow from all </Directory> ScriptAlias /cgi-bin/ /usr/lib/cgi-bin/ <Directory "/usr/lib/cgi-bin"> AllowOverride None Options +ExecCGI -MultiViews +SymLinksIfOwnerMatch Order allow,deny Allow from all </Directory> ErrorLog /var/log/apache2/error.log # Possible values include: debug, info, notice, warn, error, crit, # alert, emerg. LogLevel warn CustomLog /var/log/apache2/access.log combined Alias /doc/ "/usr/share/doc/" <Directory "/usr/share/doc/"> Options Indexes MultiViews FollowSymLinks AllowOverride None Order deny,allow Deny from all Allow from 127.0.0.0/255.0.0.0 ::1/128 </Directory> It works, but it cant read .htacces file in public_html: DirectoryIndex otherindex.php I tried change all AllowOverride to All, but I get 500 error. How can I fix this ? thanks.

  Read the article

• newbie: Allow domain users to change power-savings settings

  - by user65007

  I've just recently installed SMS 2011 on a server and added several computers to it's domain. Now I've noticed that I cannot change power settings (even when logged in as user who is in Domain Administrator role, let's call it Admin for future reference). After some googling I ended up adding Admin to the local administrators group using Group Policy Management Editor (as I have no experience in server administration I'm not sure I did it right: I went to Policy Management, selected Forest: xxxxx - Domains - xxxxx - Group Policy Objects - Windows SBS Client - Windows 7 and Windows Vista Policy - go to Settings tab on the right and right-click on anything and select Edit to go to Group Policy Mangement Editor - User Configuration - Preferences - Control Panel Settings - Local Users and Groups - right-click on it and select New - Local Group, then set Action to "Update", Group Name to "Administrators (built-in)", and added Admin to Members). After that I was able to change the power-savings settings on client computers(when logged in as Admin). Now the question: what should I do to allow any domain user to change this settings? Notice, I do not want to force some predefined power plan to all computers, I want to set it up so that any domain user on any client computer would be able to select a different power plan and to make any adjustments to the selected one. Thank you for any suggestions, just keep in mind that I'm newbie (but not completely dumb), so please answer accordingly :)

  Read the article

• IIS7ASP.Net 4.0 - 404 errors only for external clients

  - by dmcgiv

  recently we moved an ASP.Net 3.5 website to 4.0 (integrated mode) and when we deployed to the clients server (Windows Server 2008 Web edition) we notice that some .aspx pages are serving 404 errors. What is strange is that 1) the pages exist 2) if you browse from the server itself the page is served as normal, only external clients get the 404 3) it's the default 404 error page not the one configured in the web.config 4) it only happens for some .aspx pages, and I've not been able to establish a link between the pages that are not being served externally. We are using a URL rewriter module which I first thought may be at fault but then realised that only some of the failing pages are being rewritten. I've also tested removing the http module and the problem still persists. As everything is working as expected when logged onto the server I was thinking it my be some sort of permission issue, but why would it only affect a few pages? I turned on failed request tracking and the debug files are being generated with the expected 404 error, although at the moment I'm not sure what most of the data means so can't decipher what's going on internally. I'd really appreciate some help with this one.

  Read the article

• Is NFS capable of preserving order of operations?

  - by JustJeff

  I have a diskless host 'A', that has a directory NFS mounted on server 'B'. A process on A writes to two files F1 and F2 in that directory, and a process on B monitors these files for changes. Assume that B polls for changes faster than A is expected to make them. Process A seeks the head of the files, writes data, and flushes. Process B seeks the head of the files and does reads. Are there any guarantees about how the order of the changes performed by A will be detected at B? Specifically, if A alternately writes to one file, and then the other, is it reasonable to expect that B will notice alternating changes to F1 and F2? Or could B conceivably detect a series of changes on F1 and then a series on F2? I know there are a lot of assumptions embedded in the question. For instance, I am virtually certain that, even operating on just one file, if A performs 100 operations on the file, B may see a smaller number of changes that give the same result, due to NFS caching some of the actions on A before they are communicated to B. And of course there would be issues with concurrent file access even if NFS weren't involved and both the reading and the writing process were running on the same real file system. The reason I'm even putting the question up here is that it seems like most of the time, the setup described above does detect the changes at B in the same order they are made at A, but that occasionally some events come through in transposed order. So, is it worth trying to make this work? Is there some way to tune NFS to make it work, perhaps cache settings or something? Or is fine-grained behavior like this just too much expect from NFS?

  Read the article

• How to divert traffic based on hostname using HAProxy?

  - by Bosky

  I've had some initial success with HAProxy setting up a bunch of app servers listening on various other ports. I now have another webserver listening on one port, and i'd like to what changes to make to my config to flow traffic by hostname as well. The following is the current setup, assuming: my apache webserver is running at examplecom:8001 my bunch of app servers 0.0.0.0:8081, 0.0.0.0:8082 , 0.0.0.0:8083 global log 127.0.0.1 local0 log 127.0.0.1 local1 notice maxconn 4096 debug #quiet #user haproxy #group haproxy defaults log global mode http option httplog option dontlognull retries 3 redispatch maxconn 2000 contimeout 5000 clitimeout 50000 srvtimeout 50000 listen appservers 0.0.0.0:80 mode http balance roundrobin option httpclose option forwardfor #option httpchk HEAD /check.txt HTTP/1.0 server inst1 0.0.0.0:8081 cookie server01 check inter 2000 fall 3 server inst2 0.0.0.0:8082 cookie server02 check inter 2000 fall 3 server inst3 0.0.0.0:8083 cookie server01 check inter 2000 fall 3 server inst4 0.0.0.0:8084 cookie server02 check inter 2000 fall 3 capture cookie vgnvisitor= len 32 (any other comments on the ^ setup are welcome.) Now I'd like to continue the same above, but in addition in case - if the hostname is myspecialtopleveldomain<dot>com, then would like to flow traffic to example<dot>com:8001 ~B

  Read the article

• Robocopy (without /l flag) running for hours making log file huge, but not actually copying anything

  - by Mickster

  Here's my command: Robocopy C: C:\C_root /FP /BYTES /TEE /S /E /COPYALL /DCOPY:T /MOVE /Z /ETA /XJ /R:2 /W:30 /XF pagefile.sys /XD /LOG:C:\robocopy.log. BTW, notice the /XD option above. After that I had a few directories that I want to omit. I showed these between angle brackets like this: (left angle bracket) a few dirs I wanted to exclude (right angle bracket). Amongst these dirs was the C_root dir itself, so that it did not get into an "infinite" recursion. (This part was stripped from the post because angle brackets apparently have a meta-meaning to superuser.com about hyperlinks.) The command window this was running in listed a few "EXTRA" files then "hung". By this, I mean no more output, no cmnd prompt, and if I tried to scroll it up, it would immediately scroll right back to the bottom. After about six hours, it finally finished, although I never got a cmnd prompt back in the window I started it in. DIR shows the log file at more than 1.3GB, but when I try to do a MORE on it, I get "Cannot access file". C:\C_root never grew larger. Does anyone have an idea what is going on here?

  Read the article

• Strange Domain name under the same IP Address

  - by Mike Chip

  There's something really weird happening in my server. But first things first: I wanted to have my website and chose the domain name "myowndomain.com", Now on my domain registrar I point "myowndomain.com" to the address of my recently setup VPS, let's say 50.50.50.50 So I installed everything I needed to run my website, and I started to notice strange queries coming from different IP Addresses. Like these [client 123.123.123.123] File does not exist: /var/www/html/api, referer: http://www.strangedomain.com/api/manyou/my.php [client 456.456.456.456] File does not exist: /var/www/html/api, referer: http://www.strangedomain.com/api/manyou/my.php or like this (Really a long line, I cut some things) GET /?s=vod-show-id-22-area-%E5%85%B6%E4%BB%96-language-%E9%9F%A9%E8%AF%AD.html HTTP/1.1" 301 295 "http://v.strangedomain.com/?s=vod-s ...[cut]... spider" That above is happening the most. The 'strangedomain.com' returns the same IP address of my VPS which my website is hosted on. The whois of such domain shows it's registered to a chinese. But the street name didn't look so right (like a huge single word), so I think all of that info might be fake, but still might be a chinese. I also noticed that all 'clients' trying to access the 'strangedomain.com' is coming from china. If I type in the browser 'strangedomain.com', I see my website. I'm worried, because my website is actually an e-commerce. I don't know if 'strangedomain.com' WAS a website on 50.50.50.50 in the not so far past, or if it's something else.

  Read the article

• sendmail appends server name to external domains when relaying

  - by Chris

  My server is set to send all email to a corporate relay server. For the company domain, it works perfectly. I've recently found emails being sent to an outside domain are getting the hostname of my server appended to the email prior to being sent. Here is the log entry for one such attempt. Nov 6 09:46:45 myservername sendmail[45023]: rA6EkjiI045023: [email protected], delay=00:00:00, xdelay=00:00:00, mailer=relay, pri=30590, relay=[127.0.0.1] [127.0.0.1], dsn=2.0.0, stat=Sent (rA6Ekj2g045037 Message accepted for delivery) Nov 6 09:46:45 myservername sendmail[45061]: rA6Ekj2g045037: to=<[email protected]>, delay=00:00:00, xdelay=00:00:00, mailer=relay, pri=120885, relay=relay.company.com [x.x.x.x], dsn=2.0.0, stat=Sent (ok: Message 342335947 accepted) Notice the email address difference between it being accepted by my server for delivery (correct email address), and being sent and accepted by the corporate relay (incorrect with server name appended). To make it more interesting, the application on my server uses email for user account verification/activation. In August, this particular user was able to register his account and activate it. I have made no configuration changes to mail since setting the server up over a year ago. DNS is also a corporate service. I've never touched my /etc/resolv.conf configuration. domain company.com nameserver <ip1> nameserver <ip2> search myservername Thanks!

  Read the article

• Where's my free space gone? (on my mac) [closed]

  - by Cawas

  Possible Duplicate: Something’s slowly eating my HD space Somehow part of my files from my USB disk, 40GB of it (exactly the space I was missing), were copied to /Volumes/ and when I mounted the disk it was called "600GB Disk 2", while "600GB Disk" was filled with duplicated data. All that happened at once, slowly, just this morning when I turned on my macbook. I could notice that thanks to Disk Inventory X. I could actually see those on GrandPerspective, but I thought it was just scanning my USB limited to that folder for whatever reason. On Disk Inventory I could see the /Volumes/ listing one folder as a folder and the second one as a link, like it should be. Well, looking at that folder, I quickly associated what was in it with my scheduled backup on Carbon Copy Cloner. I'm still not sure why the USB disk was mounted with wrong name, but what happened was CCC store the full path information of the source and destination, so when it tried to do the schedule backup it created the path that didn't exist, and copied everything there - while it should be copying into the mounted volume. While this is solved this time, what else could I have done to diagnose this kind of issue, for the next time?

  Read the article

< Previous Page | 113 114 115 116 117 118 119 120 121 122 123 124  | Next Page >