Search Results

Search found 4520 results on 181 pages for 'notice'.

Page 116/181 | < Previous Page | 112 113 114 115 116 117 118 119 120 121 122 123  | Next Page >

  • How to set static ip address on vmware for NAT guest vms from an ubuntu Host dhcp server?

    - by javadba
    I need to configure various linux flavor NAT'ed guest vm's to have static ip addresses provided by the Ubuntu host. The vmware documentation punts on this topic, deferring to "see the man pages for your linux distribution". But the generic pages for "my linux distro" do not know about the special stuff for vmware e.g. vmnet8. Pointers from someone who just knows how to do this would be much appreciated. Here is the /etc/vmware/vmnet8/dhcpd/dhcpd.conf: allow unknown-clients; default-lease-time 1800; # default is 30 minutes max-lease-time 7200; # default is 2 hours subnet 192.168.238.0 netmask 255.255.255.0 { range 192.168.238.128 192.168.238.254; option broadcast-address 192.168.238.255; option domain-name-servers 192.168.238.2; option domain-name localdomain; default-lease-time 1800; # default is 30 minutes max-lease-time 7200; # default is 2 hours option netbios-name-servers 192.168.238.2; option routers 192.168.238.2; } host vmnet8 { hardware ethernet 00:50:56:C0:00:08; fixed-address 192.168.238.1; option domain-name-servers 0.0.0.0; option domain-name ""; option routers 0.0.0.0; } Fromt the dhcpd.conf documentation, we are supposed to add an entry for static hosts similar to the following: host mystatichostonee { hardware ethernet 00:20:6B:C7:9B:E4; fixed-address 192.168.238.101; } host mystatichosttwo { hardware ethernet 00:23:7a:C7:9c:F2; fixed-address 192.168.238.102; } But notice that the vmnet8 entry in the vmware-generated dhcpd.conf already is set to fixed-address. I don't know how to add the specifics for my hosts to that vmnet8 entry: do they become nested?

    Read the article

  • DSL Connection drops

    - by user60024
    Ok, I just moved so I had to switch from Cable to DSL. I know very little about computers or internet connections and such, so I had AT&T come out to the new house to set up their highest speed. When they got here, they told me that I needed to downgrade to 3.5mbps because I was too far away. Well we did and everything was going great for two days until I started experiencing random disconnects which have been happening now for about 2 to 3 weeks. I am using a N300 Wireless Dual Band ADSL2+ Modem Router and my ethernet cable is hooked directly into my computer from it. I recently started to notice that it disconnects around 5:30 and 8:30, which may be because a lot of people are on their computers(?) and that it works perfectly fine, almost, all the time if I'm not playing a game. During this time, when I try to load up World of Warcraft the Internet light disappears and the DSL light begins blinking. (So maybe it's too much for the modem and it resets?) Other than that it is amazing, but I'd like to try and fix some of these problems. If you need more information, let me know on how to get it for you and what to do. Thanks for the help!

    Read the article

  • How to redirect a name-based VirtualHost to a different port?

    - by Andra
    I have a virtuoso sparql endpoint installed, which I want to make available through a hostname (e.g. www.virtuosoexample.com). The thing with virtuoso is that the is no Document root. The endpoint is initiated by the daemon and made available through a source port (e.g. localhost:1234/) I know how to set a virtual host pointing to a document root, but i don't know how to do this for a server with a port number. Any advice would be appreciated. Below is the code, how I would do it with a document root. I tried to change that (naively) into localhost:1234/sparql, but that didn't work <VirtualHost * ServerName www.virtuosoexample.com <www.virtuosoexample.com> ServerAlias www.virtuosoexample.com <www.virtuosoexample.com> ErrorLog /var/log/apache2/error.wp-sparql.log # Possible values include: debug, info, notice, warn, error, crit, # alert, emerg. LogLevel warn CustomLog /var/log/apache2/access.wp-sparql.log combined DocumentRoot /var/www/endpoint/sparql/ <Directory /var/www/endpoint/sparql> Options Indexes FollowSymLinks MultiViews AllowOverride All Order allow,deny allow from all </Directory> </VirtualHost

    Read the article

  • Is there a monitoring software suite that will alert me if it has received no activity in a time period?

    - by matt b
    This might be a very basic question, but I am not very familiar with the exact features of Nagios versus Munin versus other monitoring tools. Let's say we have a process that needs to run daily for some very important infrastructure reasons. We've had cases where the process did not run or was otherwise down for a number of days before anyone noticed. I'd like to set up a system that will enable me to easily know when the daily run did not take place for some reason. I can set up this process to send an email on every successful run (or every failed run), but I do not trust that the people receiving this email would notice an absence of an "I'm OK" message. What I am envisioning is some type of "tripwire" service which this V.I.P. (very-important-process) can send a status message to each time it runs, whether successfully or not; and if the "tripwire" service has not received any word from the VIP within a configurable amount of time, it can then send an alert to someone. (The difference between what I envision and the first approach I outlined is a service that sends a message only in abnormal conditions, rather than a service that sends messages each day that the status is normal/OK). Can Nagios be set up to send an alert like this, if it has not heard from a certain service/device/process in N days? Is there another tool out there which does have this feature?

    Read the article

  • 100% uptime for a web application

    - by Chris Lively
    We received an interesting "requirement" from a client today. They want 100% uptime with off-site failover on a web application. From our web application's viewpoint, this isn't an issue. It was designed to be able to scale out across multiple database servers, etc. However, from a networking issue I just can't seem to figure out how to make it work. In a nutshell, the application will live on servers within the client's network. It is accessed by both internal and external people. They want us to maintain an off-site copy of the system that in the event of a serious failure at their premises would immediately pick up and take over. Now we know there is absolutely no way to resolve it for internal people (carrier pigeon?), but they want the external users to not even notice. Quite frankly, I haven't the foggiest idea of how this might be possible. It seems that if they lose Internet connectivity then we would have to do a DNS change to forward traffic to the external machines... Which, of course, takes time. Ideas? UPDATE I had a discussion with the client today and they clarified on the issue. They stuck by the 100% number, saying the application should stay active even in the event of a flood. However, that requirement only kicks in if we host it for them. They said they would handle the uptime requirement if the application lives entirely on their servers. You can guess my response.

    Read the article

  • Nginx Ubuntu Postfix Config - Can't connect to incoming IMAP server 'server not responding' but can send mail via outgoing using same details?

    - by daveaspinall
    I'm pretty to new server admin and especially nginx but seem to be getting ok fine apart from accessing my mail via my iPhone? I've changed my domain to 'domain.com' The thing is I can send mail via my outgoing IMAP server but can't connect to the incoming one? I just get the message "the mail server at mail.domain.com is not responding" /etc/postfix/main.cf alias_database = hash:/etc/aliases alias_maps = hash:/etc/aliases append_dot_mydomain = no biff = no broken_sasl_auth_clients = yes config_directory = /etc/postfix home_mailbox = Maildir/ inet_interfaces = all inet_protocols = all mailbox_command = mailbox_size_limit = 0 mydestination = domain.com, mail.domain.com, localhost.com, , localhost, localhost.localdomain mydomain = domain.com myhostname = mail.domain.com mynetworks = 127.0.0.0/8 [::ffff:127.0.0.0]/104 [::1]/128 myorigin = /etc/mailname recipient_delimiter = + relayhost = smtp_tls_note_starttls_offer = yes smtp_tls_security_level = may smtpd_banner = $myhostname ESMTP $mail_name (Ubuntu) smtpd_recipient_restrictions = permit_sasl_authenticated,permit_mynetworks,reject_unauth_destination smtpd_sasl_auth_enable = yes smtpd_sasl_local_domain = smtpd_sasl_security_options = noanonymous smtpd_tls_CAfile = /etc/ssl/certs/cacert.pem smtpd_tls_auth_only = no smtpd_tls_cert_file = /etc/ssl/certs/smtpd.crt smtpd_tls_key_file = /etc/ssl/private/smtpd.key smtpd_tls_loglevel = 1 smtpd_tls_received_header = yes smtpd_tls_security_level = may smtpd_tls_session_cache_timeout = 3600s tls_random_source = dev:/dev/urandom telnet localhost 25 ehlo locahost 250-mail.domain.com 250-PIPELINING 250-SIZE 10240000 250-VRFY 250-ETRN 250-STARTTLS 250-AUTH LOGIN PLAIN 250-AUTH=LOGIN PLAIN 250-ENHANCEDSTATUSCODES 250-8BITMIME 250 DSN Using the following details to connect: username password hostname: mail.domain.com port: 25 iptables --list Chain INPUT (policy ACCEPT) target prot opt source destination Chain FORWARD (policy ACCEPT) target prot opt source destination Chain OUTPUT (policy ACCEPT) target prot opt source destination I also sent mail to the server as a test and got this missage if it helps? Technical details of temporary failure: [mail.domain.com. (10): Connection refused] I also looked in /var/log/mail.log and it has multiple entries of: postfix/smtpd[12239]: connect from 5acefc9a.bb.sky.com[90.206.252.xxx] Mar 23 06:47:09 new-domain postfix/smtpd[12239]: lost connection after CONNECT from 5acefc9a.bb.sky.com[90.206.252.154] Notice new-domain which is incorrect but the server hostname and hostname in the configs are correct? I recently moves servers and the host has set the primary domain on the service as new-domain.com so this may be the issue? Like I said, it works to connect to outgoing server, but incoming gets the not responding error? Any idea would be much appreciated!

    Read the article

  • Proper configuration for Windows SMTP Virtual Server to only send email from localhost, and tracking down source of spam emails

    - by ilasno
    We manage a server that is hosted on Amazon EC2, which has web applications that need to be able to send outgoing email. Recently we received a notice from Amazon about possible email abuse on that server, so i've been looking into it. It's Windows Server Datacenter (2003, i guess), and uses SMTP Virtual Server (you know, the one that requires IIS 6 for admin). The settings on the Access tab are as follows: - Authentication: Anonymous - Connection: Only from 3 ip addresses (127.0.0.1 and 2 others that refer to that server) - Relay: Only from 3 ip addresses (127.0.0.1 and 2 others that refer to that server) In the SMTP logs there are many entries like the following: 2012-02-08 23:43:56 64.76.125.151 OutboundConnectionCommand SMTPSVC1 FROM: 0 0 4 0 26364 SMTP - - - - 2012-02-08 23:43:56 64.76.125.151 OutboundConnectionResponse SMTPSVC1 250+ok 0 0 6 0 26536 SMTP - - - - 2012-02-08 23:43:56 64.76.125.151 OutboundConnectionCommand SMTPSVC1 TO: 0 0 4 0 26536 SMTP - - - - 2012-02-08 23:43:56 64.76.125.151 OutboundConnectionResponse SMTPSVC1 250+ok 0 0 6 0 26707 SMTP - - - - ([email protected] is sending quite a lot of emails :-/) Can anyone confirm if the SMTP server settings seem correct? I'm also wondering if a web application on the machine could be exposing a contact form or something that would allow this sort of abuse, looking into that (and how to look into that) further.

    Read the article

  • Gigabit network limited to 25MB/s by CPU. How to make it faster?

    - by netvope
    I have a Acer Aspire R1600-U910H with a nForce gigabit network adapter. The maximum TCP throughput of it is about 25MB/s, and apparently it is limited by the single core Intel Atom 230; when the maximum throughput is reached, the CPU usage is about 50%-60%, which corresponds to full utilization considering this is a Hyper-threading enabled CPU. The same problem occurs on both Windows XP and on Ubuntu 8.04. On Windows, I have installed the latest nForce chipset driver, disabled power saving features, and enabled checksum offload. On Linux, the default driver has checksum offload enabled. There is no Linux driver available on Nvidia's website. ethtool -k eth0 shows that checksum offload is enabled: Offload parameters for eth0: rx-checksumming: on tx-checksumming: on scatter-gather: on tcp segmentation offload: on udp fragmentation offload: off generic segmentation offload: off The following is the output of powertop when the network is idle: Wakeups-from-idle per second : 61.9 interval: 10.0s no ACPI power usage estimate available Top causes for wakeups: 90.9% (101.3) <interrupt> : eth0 4.5% ( 5.0) iftop : schedule_timeout (process_timeout) 1.8% ( 2.0) <kernel core> : clocksource_register (clocksource_watchdog) 0.9% ( 1.0) dhcdbd : schedule_timeout (process_timeout) 0.5% ( 0.6) <kernel core> : neigh_table_init_no_netlink (neigh_periodic_timer) And when the maximum throughput of about 25MB/s is reached: Wakeups-from-idle per second : 11175.5 interval: 10.0s no ACPI power usage estimate available Top causes for wakeups: 99.9% (22097.4) <interrupt> : eth0 0.0% ( 5.0) iftop : schedule_timeout (process_timeout) 0.0% ( 2.0) <kernel core> : clocksource_register (clocksource_watchdog) 0.0% ( 1.0) dhcdbd : schedule_timeout (process_timeout) 0.0% ( 0.6) <kernel core> : neigh_table_init_no_netlink (neigh_periodic_timer) Notice the 20000 interrupts per second. Could this be the cause for the high CPU usage and low throughput? If so, how can I improve the situation? The other computers in the network can usually transfer at 50+MB/s without problems. And a minor question: How can I find out what is the driver in use for eth0?

    Read the article

  • Is it possible to do a 301 redirect AND redirect to the requested resource?

    - by Pure.Krome
    For one of our projects, we're doing a rebranding of the website name, logo, etc... As such, we need to 301 Moved Permenantly redirect all users from the old domain to the new domain. With IIS7, that's pretty simple. We just create a new website that redirects all traffic to a host-headered domain .. to the new one. But this loses their original destination resource. eg. Old Domain: www.OldDomain.com New Domain: www.NewDomain.com User: www.OldDomain.com/user/PureKrome -> 301 --> www.newDomain.com Notice how it's going to the new domain BUT not to /user/PureKrome? How can I do this so it goes to the new domain and keeps the original resource request? I'm guessing URL-ReWriter for IIS7 might help? Also, what happens if I want to do this... CurrentDomain 1: Domain.com CorrectDomain 1: www.Domain.com CurrentDomain 2: AnotherDomain.com CorrectDomain 2: www.AnotherDomain.com Is it also possible to have those in the same IIS website? So any URL to domain.com will 301 to www.domain.com Right now I'm making 2 IIS websites, with a 301 hardcoded (which still means I lose the original resource request, too). Help!

    Read the article

  • ubuntu's average load never below "0.00 0.01 0.05"

    - by Karma Fusebox
    I have several ubuntu 12.04 VMs running on a ubuntu 12.04 KVM host. Those of the virtual machines that are totally idle with no services (except syslog and the other "small" standard stuff of a fresh installation) show a constant load of "0.00 0.01 0.05" in top/htop as average 1/5/15. When there are "real" applications running, the load averages behave perfectly normal but they never fall below the mentioned values. While this doesn't affect performance at all and could easily be ignored, it screws up the monitoring graphs in a very annoying way: (Notice how load15 behaves nicely if 0.05 for a short time in the right half of the pic) Unfortunately I don't know what diagnostic outputs might be helpful for you, so here's some default stuff: # top top - 16:31:01 up 1:05, 1 user, load average: 0.00, 0.01, 0.05 Tasks: 62 total, 1 running, 61 sleeping, 0 stopped, 0 zombie Cpu(s): 0.2%us, 0.2%sy, 0.0%ni, 99.2%id, 0.5%wa, 0.0%hi, 0.0%si, 0.0%st Mem: 1019464k total, 73452k used, 946012k free, 6140k buffers Swap: 0k total, 0k used, 0k free, 22504k cached . # free -m total used free shared buffers cached Mem: 995 72 923 0 6 21 -/+ buffers/cache: 43 951 Swap: 0 0 0 . # iostat -x /dev/vda Linux 3.2.0-32-virtual (vm3) 11/15/2012 _x86_64_ (2 CPU) avg-cpu: %user %nice %system %iowait %steal %idle 0.25 0.00 0.65 0.20 0.24 98.66 Device: rrqm/s wrqm/s r/s w/s rkB/s wkB/s avgrq-sz avgqu-sz await r_await w_await svctm %util vda 0.14 0.12 0.51 0.22 6.74 1.46 22.50 0.02 23.26 20.64 29.30 7.63 0.56 Need something else? Has anyone ever seen this behavior? Might this be a bug in kvm/ubuntu/kernel 3.x in the end? Thanks a lot!

    Read the article

  • Why is XSP/mono giving me file/write errors with lucence?

    - by acidzombie24
    I am using mono 2.6.7, xsp 2.8.? and i am not sure what else. I'll try downgrading xsp and whatever else. Today i notice my server randomly gets Http Error 500, internal server error. I looked in my log files http://www.pastie.org/1426236 and it appears that the problem is locking lucence which it does by creating a file called write.lock. This use to work with no problem but now it gives me pain. It will fix itself if i refresh the page several times but it will break just as easily. My other site will not work everytime i restart apache and i need to by hand delete the file (at least it doesnt get random 500 errors). However now it just says Lock obtain timed out: NativeFSLock@/var/www/SITE_2/App_Data/LuceneIndex_a/write.lock no matter what. I even chmod -R 777 the directory and still no luck. write.lock doesnt even exist. I have no clue whats going on. Any ideas?

    Read the article

  • Command or tool to display list of connections to a Windows file share

    - by BizTalkMama
    Is there a Windows command or tool that can tell me what users or computers are connected to a Windows fileshare? Here's why I'm looking for this: I've run into issues in the past where our deployment team has deployed BizTalk applications to one of our environments using the wrong bindings, leaving us with two receive locations pointing to the same file share (i.e. both dev and test servers point to dev receive location uri). When this occurs, the two environments in question tend to take turns processing the files received (meaning if I am attempting to debug something in one environment and the other environment has picked the file up, it looks as if my test file has disappeared into thin air). We have several different environments, plus individual developer machines, and I'd rather not have to check each individually to find the culprit. I'm looking for a quick way to detect what locations are connected to the share once I notice my test files vanishing. If I can determine the connections that are invalid, I can go directly to the person responsible for that environment and avoid the time it takes to randomly ask around. Or if the connections appear to be correct, I can go directly to troubleshooting where in the process the message gets lost. Any suggestions?

    Read the article

  • Why is there no /usr/bin/ in windows? Would it be dangerous to the entire Program Files to the path?

    - by dotancohen
    I am a Linux user spending some time in Windows and I'm trying to understand some of the Windows paradigms instead of fighting them. I notice that each program installed in the traditional manner (i.e. via orgasmic installers: Yes, Yes, Yes, Finish) adds the executables to C:/Program Files/foo/bar.exe and then adds a shortcut to the Desktop / Start Menu containing the entire path. However, there is no common directory with links to the software, i.e. C:/bin/bar.exe which would link to C:/Program Files/foo/bar.exe. Therefore, after installing an application the only way to use the application is via the clicky-clicky menus or by navigating to the executable in the filesystem. One cannot simply Win-R to open the run dialogue and then type bar or bar.exe as is possible with notepad or mspaint. I realize that Windows 8 improves on this with the otherwise horrendous Start Screen which does support typing the name of the app, but again this depends on the app having registered itself for such. Would I be doing any harm by adding C:/Program Files recursively to the Windows path? I do realize that there will be name collisions (i.e. uninstall.exe) but could there be other issues?

    Read the article

  • Block SMTP connections from mail domains which don't themselves accept SMTP connection.

    - by bignose
    I'm administrating a mail service for a small business. Their mail host's internet connection is an ADSL service with a permanent IP address. Unfortunately, many misconfigured mail systems will happily deliver to this host, but, when the host attempts to send mail back (e.g. a bounce notice, or a normal response from someone), the original sender refuses to receive connections from this host. That misconfiguration makes their system a one-way mail sender, which is a problem. How can I configure Postfix on this customer's mail host to refuse SMTP sessions that declare a sender domain which itself refuses SMTP from this host? That is, if the SMTP client declares a domain that we can't make SMTP connections back to, then there's not much point accepting the incoming connection in the first place. I'm imagining a late check (after the low-cost checks to winnow most of the rubbish connections) that keeps the client on the other end while it attempts an SMTP client connection back to the declared domain of the sender. If that connection is rejected, the incoming one is also rejected. I'm also open to other suggestions for how this problem might be addressed (short of not using this mail host at all, which isn't an option).

    Read the article

  • Firefox Does NOT get local site cookie

    - by Campo
    This is a weird one. We have a production server (Server 2008) and two staging servers (Server 2008 and Server 2003) I have sites on all of these. They all use cookies. On the Production server when browsing to our site www.supernovainteractive.com there is a cookie that detects when you visted the site and it will not refresh the logo animation (top left hand side) on clicking to another page. This works for all browsers on the production server. I’m not sure what’s going on but for some reason cookies are not working on one site in the 2008 staging server only. This is when browsing using Firefox (3.6.3) they work fine on all other browsers (IE, Chrome, Safari, Opera) In addition, the 2003 staging server works fine. You can test on the Supernova Interactive site by noticing the logo in the top left corner. It uses a cookie to detect if you’ve already seen the animation. Once you’ve seen it once, it doesn’t animate again until tomorrow. Currently, it’s animating every time. I have opened an outside facing port so others can see the issue. Http://exchange.supernova.com:10009 Any ideas on this one? Firewalls are off on the server. Notice you do not get a cookie from Exchange.supernova.com.

    Read the article

  • How to reduce celeryd memory consumption?

    - by Gringo Suave
    I'm using celery 2.5.1 with django on a micro ec2 instance with 613mb memory and as such have to keep memory consumption down. Currently I'm using it only for the scheduler "celery beat" as a web interface to cron, though I hope to use it for more in the future. I've noticed it is the biggest consumer of memory on my micro machine even though I have configured the number of workers to one. I don't have many other options set in settings.py: import djcelery djcelery.setup_loader() BROKER_BACKEND = 'djkombu.transport.DatabaseTransport' CELERYBEAT_SCHEDULER = 'djcelery.schedulers.DatabaseScheduler' CELERY_RESULT_BACKEND = 'database' BROKER_POOL_LIMIT = 2 CELERYD_CONCURRENCY = 1 CELERY_DISABLE_RATE_LIMITS = True CELERYD_MAX_TASKS_PER_CHILD = 20 CELERYD_SOFT_TASK_TIME_LIMIT = 5 * 60 CELERYD_TASK_TIME_LIMIT = 6 * 60 Here's the details via top: PID USER NI CPU% VIRT SHR RES MEM% Command 1065 wuser 10 0.0 283M 4548 85m 14.3 python manage_prod.py celeryd --beat 1025 wuser 10 1.0 577M 6368 67m 11.2 python manage_prod.py celeryd --beat 1071 wuser 10 0.0 578M 2384 62m 10.6 python manage_prod.py celeryd --beat That's about 214mb of memory (and not much shared) to run a cron job occasionally. Have I done anything wrong, or can this be reduced about ten-fold somehow? ;) Update: here's my upstart config: description "Celery Daemon" start on (net-device-up and local-filesystems) stop on runlevel [016] nice 10 respawn respawn limit 5 10 chdir /home/wuser/wuser/ env CELERYD_OPTS=--concurrency=1 exec sudo -u wuser -H /usr/bin/python manage_prod.py celeryd --beat --concurrency=1 --loglevel info --logfile /var/tmp/celeryd.log Update 2: I notice there is one root process, one user child process, and two grandchildren from that. So I think it isn't a matter of duplicate startup. root 34580 1556 sudo -u wuser -H /usr/bin/python manage_prod.py celeryd wuser 577M 67548 +- python manage_prod.py celeryd --beat --concurrency=1 wuser 578M 63784 +- python manage_prod.py celeryd --beat --concurrency=1 wuser 271M 76260 +- python manage_prod.py celeryd --beat --concurrency=1

    Read the article

  • What are ways to prevent files with the Right-to-Left Override Unicode character in their name (a malware spoofing method) from being written or read?

    - by galacticninja
    What are ways to avoid or prevent files with the RLO (Right-to-Left Override) Unicode character in their name (a malware method to spoof filenames) from being written or read in a Windows PC? More info on the RLO unicode character here: http://www.fileformat.info/info/unicode/char/202e/index.htm http://en.wikipedia.org/wiki/Bi-directional_text Info on the RLO unicode character when used by malware: http://www.ipa.jp/security/english/virus/press/201110/E_PR201110.html Mirror link: http://webcache.googleusercontent.com/search?q=cache:KasmfOvbVJ8J:www.ipa.jp/security/english/virus/press/201110/E_PR201110.html+&cd=1&hl=en&ct=clnk You can try this RLO character test webpage: http://www.fileformat.info/info/unicode/char/202e/browsertest.htm The RLO character is also already pasted in the 'Input Test' field in that webpage. Try typing there and notice that the characters you're typing are coming out in their reverse orders (right-to-left, instead of left-to-right). In filenames, the RLO character can be specifically positioned in the filename to spoof or masquerade as having a filename or file extension that is different than what it actually has. (Will still be hidden even if 'Hide extensions for known filetypes' is unchecked.) The only info I can find that has info on how to prevent files with the RLO character from being run is from the Information Technology Promotion Agency, Japan website: http://www.ipa.jp/security/english/virus/press/201110/E_PR201110.html (Mirror link). They adviced to use the Local Security Policy settings manager to block files with the RLO character in its name from being run. Can anyone recommend any other good solutions to prevent files with the RLO character in their names from being written or being read in the computer, or a way to alert the user if a file with the RLO character is detected? My OS is Windows 7, but I'll be looking for solutions for Windows XP, Vista and 7, or a solution that will work for all those OSes, to help people using those OSes too.

    Read the article

  • Is it possible to record a screen-video from a VNC server?

    - by nikie
    I have a computer that's running VNC server. I would like to record a video of what's going on on this computer, if possible without installing additional software on that computer. Is there a program that can connect to the VNC server port and instead of displaying the screen save it to an (e.g. AVI) video file? Background: One of our customers sometimes has problems with the software he bought from us when he's performing a complex procedure. To help him, we offered that someone (a service technician or programmer) watches what he's doing during that procedure to find out if he's doing something wrong or if there's a bug in the software. Currently, this is done live via VNC. That has a few disadvantages: The service technician has to be in the office at the time. As the customers are in different time zones, that can be in the middle of the night. If the service technician forgets something or doesn't notice something, it's lost. There's no way to see what happened again. Only a single computer can be watched by one service technician at a time. I know I could install normal screen-grab software on the computer, but we're talking about an embedded system with limited RAM, CPU, HDD space, so installing something new is not an easy decision. And VNC is already there. I could of course open a VNC client on some office PC and capture that PC's screen, but I can only record one remote computer that way. I often have to watch up to 8 screens in parallel. (And I don't think that screen-grabbing VNC would improve image quality, either.)

    Read the article

  • pdns-recursor allocates resources to non-existing queries

    - by azzid
    I've got a lab-server running pdns-recursor. I set it up to experiment with rate limiting, so it has been resolving requests openly from the whole internet for weeks. My idea was that sooner or later it would get abused, giving me a real user case to experiment with. To keep track of the usage I set up nagios to monitor the number of concurrent-queries to the server. Today I got notice from nagios that my specified limit had been reached. I logged in to start trimming away the malicious questions I was expecting, however, when I started looking at it I couldn't see the expected traffic. What I found is that even though I have over 20 concurrent-queries registered by the server I see no requests in the logs. The following command describes the situation well: $ sudo rec_control get concurrent-queries; sudo rec_control top-remotes 22 Over last 0 queries: How can there be 22 concurrent-queries when the server has 0 queries registered? EDIT: Figured it out! To get top-remotes working I needed to set ################################# # remotes-ringbuffer-entries maximum number of packets to store statistics for # remotes-ringbuffer-entries=100000 It defaults to 0 storing no information to base top-remotes statistics on.

    Read the article

  • apache segmentation error

    - by lush
    I can't start Apache with the following errors: [root@web]# /etc/init.d/httpd start Starting httpd: /bin/bash: line 1: 19232 Segmentation fault /usr/sbin/httpd [root@web]# /usr/sbin/apachectl -k start /usr/sbin/apachectl: line 102: 19919 Segmentation fault $HTTPD $OPTIONS $ARGV I use webmin control panel and I've already tried re-installing Apache from scratch. Can someone advise what else I should try to do? Many thanks. UPDATE: The only line is always written in the error logs which seems not to be very important: [Mon Nov 14 19:00:09 2011] [notice] suEXEC mechanism enabled (wrapper: /usr/sbin/suexec) UPDATE 2: I've recently had the error below in the logs. Looks like some modules are incompatible, so I've just disabled these extensions: fileinfo and mcrypt in my php.ini. I should be able to start the web server without them. PHP Warning: PHP Startup: fileinfo: Unable to initialize module\nModule compiled with module API=20050922, debug=0, thread-safety=0\nPHP compiled with module API=20060613, debug=0, thread-safety=0\nThese options need to match\n in Unknown on line 0 PHP Warning: Module 'mcrypt' already loaded in Unknown on line 0 UPDATE 3: [root@web]# file /usr/sbin/httpd /usr/sbin/httpd: ELF 64-bit LSB shared object, AMD x86-64, version 1 (SYSV), for GNU/Linux 2.6.9, stripped [root@web]# uname -m x86_64

    Read the article

  • Need help trying to allow my remote PowerShell script to run on my Windows 2008 r2 Server

    - by Pure.Krome
    I've got a Windows 2008 r2 server with Sql Server 2008 r2 installed. I've got a Sql Server Agent which tries to run a Powershell job, but fails :- Message Executed as user: FooServer\SqlServerUser. A job step received an error at line 1 in a PowerShell script. The corresponding line is '& '\\polanski\Backups\Database\7ZipFooDatabases.ps1'' Correct the script and reschedule the job. The error information returned by PowerShell is: 'File \\polanski\Backups\Database\7ZipFooDatabases.ps1 cannot be loaded. The file \\polanski\Backups\Database\7ZipFooDatabases.ps1 is not digitally signed. The script will not execute on the system. Please see "get-help about_signing" for more details.. '. Process Exit Code -1. The step failed. Ok. So i run Powershell on that server then set the execution policy to unrestricted. To check .. PS C:\Users\theUser> Get-ExecutionPolicy Unrestricted PS C:\Users\theUser> Kewl :) but it still doesn't work :( Ok ... what happens when i try to run the powershell from the command line.... PS C:\Users\justin.adler . '\polanski\Backups\Database\7ZipMotorshoutDatabases.ps1' Security Warning Run only scripts that you trust. While scripts from the Internet can be useful, this script can potentially harm your computer. Do you want to run \\polanski\Backups\Database\7ZipFooDatabases.ps1? [D] Do not run [R] Run once [S] Suspend [?] Help (default is "D"): er..... didn't I already tell the server that ANY file can be ran? Notice the file is located at... \\polanski\Backups\Database\ So can someone make any suggestions?

    Read the article

  • HAProxy, health checking multiple servers with different host names

    - by Marco Bettiolo
    I need to load balance between multiple running servers with different host names. I cannot set-up the same virtual host on each one. Is it possible to have only one listen configuration with multiple server and make the Health Checks apply the http-send-name-header Host directive? I am using HAProxy 1.5. I came up with this working haproxy.cfg, as you can see, I had to set a different hostname for each health check as the health check ignores the http-send-name-header Host. I would have preferred to use variables or other methods and keep things more concise. global log 127.0.0.1 local0 notice maxconn 2000 user haproxy group haproxy defaults log global mode http option httplog option dontlognull retries 3 option redispatch timeout connect 5000 timeout client 10000 timeout server 10000 stats enable stats uri /haproxy?stats stats refresh 5s balance roundrobin option httpclose listen inbound :80 option httpchk HEAD / HTTP/1.1\r\n server instance1 127.0.0.101 check inter 3000 fall 1 rise 1 server instance2 127.0.0.102 check inter 3000 fall 1 rise 1 listen instance1 127.0.0.101:80 option forwardfor http-send-name-header Host option httpchk HEAD / HTTP/1.1\r\nHost:\ www.example.com server www.example.com www.example.com:80 check inter 5000 fall 3 rise 2 listen instance2 127.0.0.102:80 option forwardfor http-send-name-header Host option httpchk HEAD / HTTP/1.1\r\nHost:\ www.bing.com server www.bing.com www.bing.com:80 check inter 5000 fall 3 rise 2

    Read the article

  • Limit access on Apache 2.4 to ldap group

    - by jakobbg
    I've upgraded from Ubuntu 12.04 LTS to 14.04 LTS, and suddenly, my Apache 2.4 (previous: Apache 2.2) now lets everybody in to my virtual host, which is unfortunate :-). What am I doing wrong? Anything with the Order/Allow lines? Any help is greatly appreciated! Here's my current config; <VirtualHost *:443> DavLockDB /etc/apache2/var/DavLock ServerAdmin [email protected] ServerName foo.mydomain.com DocumentRoot /srv/www/foo Include ssl-vhosts.conf <Directory /srv/www/foo> Order allow,deny Allow from all Dav On Options FollowSymLinks Indexes AllowOverride None AuthBasicProvider ldap AuthType Basic AuthName "Domain foo" AuthLDAPURL "ldap://localhost:389/dc=mydomain,dc=com?uid" NONE AuthLDAPBindDN "cn=searchUser, dc=mydomain, dc=com" AuthLDAPBindPassword "ThisIsThePwd" require ldap-group cn=users,dc=mydomain,dc=com <FilesMatch '^\.[Dd][Ss]_[Ss]'> Order allow,deny Deny from all </FilesMatch> <FilesMatch '\.[Dd][Bb]'> Order allow,deny Deny from all </FilesMatch> </Directory> ErrorLog /var/log/apache2/error-foo.log # Possible values include: debug, info, notice, warn, error, crit, # alert, emerg. LogLevel warn CustomLog /var/log/apache2/access-foo.log combined </VirtualHost>

    Read the article

  • Provider claiming "all web servers in the cloud are automatically kept in sync" - should I be skeptical?

    - by RobMasters
    I'm no expert in cloud computing - I've spent a fair bit of time researching it and various providers but am yet to get any hands-on experience with it. From what I've read about AWS and auto-scaling EC2 instances though, it seems as though each instance should be completely decoupled from all other instances. i.e. If content is uploaded to the web server's local filesystem from a custom CMS backend then that content won't be available if subsequently requested from a different web server in the auto-scaling group. Is that right? I met with a representative of our existing hosting provider recently and he was claiming that it isn't a problem that our legacy CMS system is highly dependent on having a local filesystem. He said that all web servers, regardless of how many, would be kept as exact duplicates so I shouldn't notice any difference compared to our existing setup of a single dedicated server. This smells a little too much like bull fecal-matter to me...should I be skeptical about this? I'm a little worried because my (non-technical) boss who ultimately makes the decisions is all for signing up to this cloud solution because it won't require any extra work. I'm sure that they must at least be able to provide this, otherwise they wouldn't be attempting to sell it to us. But at what cost? It sounds as though each web server will always need to be checking the other web server(s) for new static content, which to me sounds like unwanted overhead that'll slow things down. I'd really appreciate it if somebody could clear this up to me. I'm all for switching to AWS and using S3+CloudFront for all static content, but that isn't looking very likely to happen at the moment.

    Read the article

  • Installed Windows 7 Ultimate on D Drive and previous Windows 7 Enterprise on C Drive has stopped starting up

    - by teenup
    Please please help! I have installed Windows 7 Ultimate on same hard drive on D Drive on my laptop and the previous Windows 7 Enterprise which was installed on C Drive is not booting up now. When I turn on my laptop, I see two Windows 7 on the screen, when I select newer one, it starts, but when I select older one which is Enterprise edition, system won't start and I get the DOS black screen with this error message: Windows Boot Manager Windows failed to start. A recent hardware or software change might be the cause. To fix the problem: Insert your Windows installation disc and restart your computer. Choose your language settings, and then click "Next." Click "repair your computer." Info: The boot selection failed because a required device is inaccessible. I notice that when I run the newer OS installed, the previous OS's drive (Which is D: now instead of C:) has become unusable and when I double click it, it asks me to format the drive. The data, that I had on my D Drive (Which is now C Drive for new OS), I had copied it to a network path and it is available. It was containing Windows 7 Users folder which I copied at that time when installing new windows. I have copied that Users folder again to the new OS's C Drive thinking it would run again, but of no use. Please please please...if someone can help...It is extremely required for me. Thanks a lot in advance.

    Read the article

< Previous Page | 112 113 114 115 116 117 118 119 120 121 122 123  | Next Page >