Search Results

Search found 13145 results on 526 pages for 'print drivers'.

Page 117/526 | < Previous Page | 113 114 115 116 117 118 119 120 121 122 123 124  | Next Page >

  • Windows 7 Taskbar Icons Randomly Disappearing

    - by Ryker
    This is a problem that i'm totally stumped on. Taskbar Icons that are pinned, as well as open program thumbs keep disappearing. This is totally random, no set pattern. I've tried updating drivers for the vid card, rolling back to old drivers, nothing seems to work. I've also tried the usual uncheck hide the taskbar and recheck, changing the start menu, keeping commonly used programs in start menu, etc. This is using an add-in card which is a necessity. Here is the specs on the machine: New Dell Optiplex 390 i3 2100 Proc 3gb Ram, Windows 7 32-bit. The add in card is an Nvidia 8400 GS model. I've tried different versions of the 8400gs, from MSI, or from other manufactureres and regardless it keeps happening. After the Icons disappear, I can log out and log back in and they return, but disappear again. I can reinstall the drivers for the vid card and it fixes it for a few days, and then they disappear again. There isn't any set pattern of days that it happens, software being used, etc. Another user in the office had the same problem with the exact same machine, but updating the vid card drivers fixed the issue. Anyone?

    Read the article

  • How do I disable DirectDraw and Direct3D acceleration on Windows 8? [closed]

    - by Favourite Chigozie Onwuemene
    Some old games that i would really like to play run slowly on some graphic drivers when direct3d acceleration is enabled. I have tried many suggestions but none seems to work. The only thing i have not tried is disabling direct3d acceleration. Is it possible to disable DirectDraw and Direct3D acceleration on my Windows 8 pc? There are certain bad versions of GeForce drivers that cause this problem. This is a problem in the drivers themselves and is unfortunately completely outside our control. The recommended way to fix this problem is to update your graphics card drivers (go to NVIDIA's web site for this). Alternatively, there is a workaround that alleviates or solves the slowdown problem altogether. Try this: Right-click on your desktop and select "Properties". Go to the "Settings" tab and click on "Advanced...". Click on the "Troubleshooting" tab and move the slider to the left until it says that all DirectDraw and Direct3D accelerations have been disabled (around the middle of the range). Finally, click on "OK". Note that this workaround might cause other games on your computer to slow down, so you may have to switch back and forth between settings, but it's certainly worth a try if you can't obtain an updated graphics driver. -source: interactionstudios

    Read the article

  • How to Force Graphics Options in PC Games with NVIDIA, AMD, or Intel Graphics

    - by Chris Hoffman
    PC games usually have built-in graphics options you can change. But you’re not limited to the options built into games — the graphics control panels bundled with graphics drivers allow you to tweak options from outside PC games. For example, these tools allow you to force-enabling antialiasing to make old games look better, even if they don’t normally support it. You can also reduce graphics quality to get more performance on slow hardware. If You Don’t See These Options If you don’t have the NVIDIA Control Panel, AMD Catalyst Control Center, or Intel Graphics and Media Control Panel installed, you may need to install the appropriate graphics driver package for your hardware from the hardware manufacturer’s website. The drivers provided via Windows Update don’t include additional software like the NVIDIA Control Panel or AMD Catalyst Control Center. Drivers provided via Windows Update are also more out of date. If you’re playing PC games, you’ll want to have the latest graphics drivers installed on your system. NVIDIA Control Panel The NVIDIA Control Panel allows you to change these options if your computer has NVIDIA graphics hardware. To launch it, right-click your desktop background and select NVIDIA Control Panel. You can also find this tool by performing a Start menu (or Start screen) search for NVIDIA Control Panel or by right-clicking the NVIDIA icon in your system tray and selecting Open NVIDIA Control Panel. To quickly set a system-wide preference, you could use the Adjust image settings with preview option. For example, if you have old hardware that struggles to play the games you want to play, you may want to select “Use my preference emphasizing” and move the slider all the way to “Performance.” This trades graphics quality for an increased frame rate. By default, the “Use the advanced 3D image settings” option is selected. You can select Manage 3D settings and change advanced settings for all programs on your computer or just for specific games. NVIDIA keeps a database of the optimal settings for various games, but you’re free to tweak individual settings here. Just mouse-over an option for an explanation of what it does. If you have a laptop with NVIDIA Optimus technology — that is, both NVIDIA and Intel graphics — this is the same place you can choose which applications will use the NVIDIA hardware and which will use the Intel hardware. AMD Catalyst Control Center AMD’s Catalyst Control Center allows you to change these options on AMD graphics hardware. To open it, right-click your desktop background and select Catalyst Control Center. You can also right-click the Catalyst icon in your system tray and select Catalyst Control Center or perform a Start menu (or Start screen) search for Catalyst Control Center. Click the Gaming category at the left side of the Catalyst Control Center window and select 3D Application Settings to access the graphics settings you can change. The System Settings tab allows you to configure these options globally, for all games. Mouse over any option to see an explanation of what it does. You can also set per-application 3D settings and tweak your settings on a per-game basis. Click the Add option and browse to a game’s .exe file to change its options. Intel Graphics and Media Control Panel Intel integrated graphics is nowhere near as powerful as dedicated graphics hardware from NVIDIA and AMD, but it’s improving and comes included with most computers. Intel doesn’t provide anywhere near as many options in its graphics control panel, but you can still tweak some common settings. To open the Intel graphics control panel, locate the Intel graphics icon in your system tray, right-click it, and select Graphics Properties. You can also right-click the desktop and select Graphics Properties. Select either Basic Mode or Advanced Mode. When the Intel Graphics and Media Control Panel appears, select the 3D option. You’ll be able to set your Performance or Quality setting by moving the slider around or click the Custom Settings check box and customize your Anisotropic Filtering and Vertical Sync preference. Different Intel graphics hardware may have different options here. We also wouldn’t be surprised to see more advanced options appear in the future if Intel is serious about competing in the PC graphics market, as they say they are. These options are primarily useful to PC gamers, so don’t worry about them — or bother downloading updated graphics drivers — if you’re not a PC gamer and don’t use any intensive 3D applications on your computer. Image Credit: Dave Dugdale on Flickr     

    Read the article

  • How to install iodbc in Ubuntu 12.10

    - by Hanynowsky
    I need to install the library iodbc (depends on libodbc2) in my Quantal machine. Yet there is creepy dependency problem. This was replaced somehow by unixodbc which I don't have, installed. Here is what I get when I try to install : sudo apt-get install libiodbc2-dev Reading package lists... Done Building dependency tree Reading state information... Done Some packages could not be installed. This may mean that you have requested an impossible situation or if you are using the unstable distribution that some required packages have not yet been created or been moved out of Incoming. The following information may help to resolve the situation: The following packages have unmet dependencies: libiodbc2-dev : Depends: libiodbc2 (= 3.52.7-2build2) but it is not going to be installed Depends: iodbc (= 3.52.7-2build2) but it is not going to be installed E: Unable to correct problems, you have held broken packages. I can tell that iodbc conflicts with odbcinst. Yet, I cannot remove it due to the following: sudo apt-get remove odbcinst Reading package lists... Done Building dependency tree Reading state information... Done The following packages were automatically installed and are no longer required: akonadi-backend-mysql calligra-l10n-engb kde-l10n-engb kdevelop-l10n kdevelop-php-docs-l10n kdevelop-php-l10n libakonadi-kabc4 libakonadi-notes4 libakonadiprotocolinternals1 libboost-thread1.49.0 libdmtx0a libgpgme++2 libkcalcore4 libkdgantt2 libkholidays4 libkimap4 libkldap4 libkmbox4 libkmime4 libkolabxml0 libkpgp4 libkresources4 libksieve4 libprison0 libqgpgme1 libqrencode3 libxerces-c3.1 Use 'apt-get autoremove' to remove them. The following packages will be REMOVED: akonadi-server k3b k3b-i18n katepart kde-runtime kdelibs-bin kdelibs5-plugins kdepim-runtime kdepim-strigi-plugins kdepimlibs-kio-plugins kdoctools kget kmag kmail kmix kmousetool ksystemlog kubuntu-debug-installer language-pack-kde-ar language-pack-kde-en libakonadi-calendar4 libakonadi-contact4 libakonadi-kcal4 libakonadi-kde4 libakonadi-kmime4 libcalendarsupport4 libincidenceeditorsng4 libk3b6 libkabc4 libkactivities-bin libkactivities6 libkalarmcal2 libkatepartinterfaces4 libkcal4 libkcalutils4 libkcddb4 libkde3support4 libkdepim4 libkdepimdbusinterfaces4 libkdewebkit5 libkemoticons4 libkfile4 libkgapi0 libkhtml5 libkio5 libkleo4 libkmanagesieve4 libkmediaplayer4 libknewstuff3-4 libknotifyconfig4 libkolab0 libkonq-common libkonq5abi1 libkontactinterface4 libkparts4 libkpimidentities4 libkpimtextedit4 libkpimutils4 libkprintutils4 libksieveui4 libktexteditor4 libktnef4 libktorrent4 libkworkspace4abi2 libkxmlrpcclient4 libmailcommon4 libmailimporter4 libmailtransport4 libmessagecomposer4 libmessagecore4 libmessagelist4 libmessageviewer4 libmicroblog4 libnepomuk4 libnepomukcore4abi1 libnepomukquery4a libnepomuksync4 libnepomukutils4 libplasma3 libsoprano4 libtemplateparser4 libvirtodbc0 nepomuk-core odbcinst odbcinst1debian2 plasma-scriptengine-javascript qapt-batch soprano-daemon virtuoso-minimal 0 upgraded, 0 newly installed, 89 to remove and 0 not upgraded. After this operation, 126 MB disk space will be freed. Do you want to continue [Y/n]? Other info: Why do the "iodbc" and "libmyodbc" packages conflict with each other? The root problem is that I need to use a new feature introduced in the latest MySQL Workbench builds (DB Migration) which uses odbc for that matter. Here is what Mysql doc says about it : Linux The Migration Wizard uses iODBC as a driver manager for all of its ODBC connections in Linux. This may give you some troubles because most Linux distributions provide ODBC drivers compiled against unixODBC. This is another driver manager not supported by MySQL Workbench so you won’t be able to use those drivers unless you compile them against iODBC. Here’s what you should do. Make sure that you have iODBC installed. If you are using Debian, Ubuntu or another Debian based distro, type this command in your terminal: $ sudo apt-get install iodbc libiodbc2-dev libpq-dev libssl-dev For RPM based distros (RedHat, Fedora, etc.) type this command instead of the previous one: $ sudo yum install iodbc iodbc-dev libpqxx-devel openssl-devel Now we need to install the PostgreSQL ODBC drivers. Download the psqlODBC source tarball from here. Use the latest version available for download. As of this writing the latest version corresponds to the file psqlodbc-09.01.0200.tar.gz. Extract this tarball to a directory in your hard drive and open a terminal and cd into that directory. Type this in the terminal window: $ ./configure --with-iodbc --enable-pthreads $ make $ sudo make install Verify that you have the file psqlodbcw.so in the /usr/local/lib directory. This package seems to pose the problem probably: dpkg -s odbcinst1debian2 Package: odbcinst1debian2 Status: install ok installed Priority: optional Section: libs Installed-Size: 241 Maintainer: Ubuntu Developers <[email protected]> Architecture: amd64 Multi-Arch: same Source: unixodbc Version: 2.2.14p2-5ubuntu4 Replaces: unixodbc (<< 2.1.1-2) Depends: libc6 (>= 2.14), libltdl7 (>= 2.4.2), odbcinst Pre-Depends: multiarch-support Breaks: libiodbc2, libmyodbc (<< 5.1.6-2), odbc-postgresql (<< 1:09.00.0310-1.1), tdsodbc (<< 0.82-8) Conflicts: odbcinst1, odbcinst1debian1 Description: Support library for accessing odbc ini files This package contains the libodbcinst library from unixodbc, a library used by ODBC drivers for reading their configuration settings from /etc/odbc.ini and ~/.odbc.ini. . Also contained in this package are the driver setup plugins, which describe the features supported by individual ODBC drivers. Homepage: http://www.unixodbc.org/ Original-Maintainer: Steve Langasek <[email protected]> I have no broken packages:

    Read the article

  • Wireless Problem on Acer Aspire 5610z

    - by Ugur Can Yalaki
    I installed ubuntu 12.04 on my machine, but I can't get wireless connection to work. My computer is Acer Aspire 5610z. I found that some other people that have same computer, face the same problem. Here is some information about it: ****** info trace ****** * uname -a * Linux ucy-Aspire-5610Z 3.8.0-32-generic #47~precise1-Ubuntu SMP Wed Oct 2 16:22:28 UTC 2013 i686 i686 i386 GNU/Linux * lsb_release * Distributor ID: Ubuntu Description: Ubuntu 12.04.3 LTS Release: 12.04 Codename: precise * lspci * 05:00.0 Network controller [0280]: Broadcom Corporation BCM4311 802.11b/g WLAN [14e4:4311] (rev 01) Subsystem: AMBIT Microsystem Corp. Device [1468:0422] Kernel driver in use: b43-pci-bridge 06:01.0 Ethernet controller [0200]: Broadcom Corporation BCM4401-B0 100Base-TX [14e4:170c] (rev 02) Subsystem: Acer Incorporated [ALI] Device [1025:0090] Kernel driver in use: b44 * lsusb * Bus 001 Device 004: ID 04e8:6863 Samsung Electronics Co., Ltd Bus 001 Device 002: ID 5986:0100 Acer, Inc Orbicam Bus 002 Device 002: ID 046d:c52f Logitech, Inc. Wireless Mouse M305 Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub * PCMCIA Card Info * PRODID_1="" PRODID_2="" PRODID_3="" PRODID_4="" MANFID=0000,0000 FUNCID=255 * iwconfig * * rfkill * 0: acer-wireless: Wireless LAN Soft blocked: no Hard blocked: no * lsmod * ssb_hcd 12781 0 ssb 51554 2 ssb_hcd,b44 * nm-tool * NetworkManager Tool State: connected (global) Device: usb0 [Wired connection 2] ------------------------------------------- Type: Wired Driver: rndis_host State: connected Default: yes HW Address: Capabilities: Carrier Detect: yes Wired Properties Carrier: on IPv4 Settings: Address: 192.168.42.7 Prefix: 24 (255.255.255.0) Gateway: 192.168.42.129 DNS: 192.168.42.129 IPv6 Settings: Address: ::a05d:a1ff:fea4:1738 Prefix: 64 Gateway: fe80::504d:76ff:fe86:db04 Address: fe80::a05d:a1ff:fea4:1738 Prefix: 64 Gateway: fe80::504d:76ff:fe86:db04 DNS: fe80::504d:76ff:fe86:db04 Device: eth2 ----------------------------------------------------------------- Type: Wired Driver: b44 State: unavailable Default: no HW Address: Capabilities: Carrier Detect: yes Wired Properties Carrier: off * NetworkManager.state * [main] NetworkingEnabled=true WirelessEnabled=true WWANEnabled=true WimaxEnabled=true * NetworkManager.conf * [main] plugins=ifupdown,keyfile dns=dnsmasq [ifupdown] managed=false * interfaces * auto lo iface lo inet loopback * iwlist * * resolv.conf * nameserver 127.0.0.1 * blacklist * [/etc/modprobe.d/blacklist-ath_pci.conf] blacklist ath_pci [/etc/modprobe.d/blacklist-bcm43.conf] blacklist b43 blacklist b43legacy blacklist ssb blacklist bcm43xx blacklist brcm80211 blacklist brcmfmac blacklist brcmsmac blacklist bcma [/etc/modprobe.d/blacklist.conf] blacklist evbug blacklist usbmouse blacklist usbkbd blacklist eepro100 blacklist de4x5 blacklist eth1394 blacklist snd_intel8x0m blacklist snd_aw2 blacklist i2c_i801 blacklist prism54 blacklist bcm43xx blacklist garmin_gps blacklist asus_acpi blacklist snd_pcsp blacklist pcspkr blacklist amd76x_edac * modinfo * filename: /lib/modules/3.8.0-32-generic/kernel/drivers/usb/host/ssb-hcd.ko license: GPL description: Common USB driver for SSB Bus author: Hauke Mehrtens srcversion: E127A51EDC8F44D2C2A8F15 alias: ssb:v4243id0819rev* alias: ssb:v4243id0817rev* alias: ssb:v4243id0808rev* depends: ssb intree: Y vermagic: 3.8.0-32-generic SMP mod_unload modversions 686 filename: /lib/modules/3.8.0-32-generic/kernel/drivers/ssb/ssb.ko license: GPL description: Sonics Silicon Backplane driver srcversion: 14621F6EC014F731244437C alias: pci:v000014E4d00004350sv*sd*bc*sc*i* alias: pci:v000014E4d0000432Csv*sd*bc*sc*i* alias: pci:v000014E4d0000432Bsv*sd*bc*sc*i* alias: pci:v000014E4d00004329sv*sd*bc*sc*i* alias: pci:v000014E4d00004328sv*sd*bc*sc*i* alias: pci:v000014E4d00004325sv*sd*bc*sc*i* alias: pci:v000014E4d00004324sv*sd*bc*sc*i* alias: pci:v000014E4d0000A8D6sv*sd*bc*sc*i* alias: pci:v000014E4d00004322sv*sd*bc*sc*i* alias: pci:v000014E4d00004321sv*sd*bc*sc*i* alias: pci:v000014E4d00004320sv*sd*bc*sc*i* alias: pci:v000014E4d00004319sv*sd*bc*sc*i* alias: pci:v000014A4d00004318sv*sd*bc*sc*i* alias: pci:v000014E4d00004318sv*sd*bc*sc*i* alias: pci:v000014E4d00004315sv*sd*bc*sc*i* alias: pci:v000014E4d00004312sv*sd*bc*sc*i* alias: pci:v000014E4d00004311sv*sd*bc*sc*i* alias: pci:v000014E4d00004307sv*sd*bc*sc*i* alias: pci:v000014E4d00004306sv*sd*bc*sc*i* alias: pci:v000014E4d00004301sv*sd*bc*sc*i* depends: intree: Y vermagic: 3.8.0-32-generic SMP mod_unload modversions 686 * udev rules * PCI device 0x14e4:/sys/devices/pci0000:00/0000:00:1e.0/0000:06:01.0/ssb1:0 (b44) SUBSYSTEM=="net", ACTION=="add", DRIVERS=="?*", ATTR{address}=="", ATTR{dev_id}=="0x0", ATTR{type}=="1", KERNEL=="eth*", NAME="eth0" PCI device 0x14e4:/sys/devices/pci0000:00/0000:00:1e.0/0000:06:01.0/ssb2:0 (b44) SUBSYSTEM=="net", ACTION=="add", DRIVERS=="?*", ATTR{address}=="", ATTR{dev_id}=="0x0", ATTR{type}=="1", KERNEL=="eth*", NAME="eth1" PCI device 0x14e4:/sys/devices/pci0000:00/0000:00:1e.0/0000:06:01.0/ssb3:0 (b44) SUBSYSTEM=="net", ACTION=="add", DRIVERS=="?*", ATTR{address}=="", ATTR{dev_id}=="0x0", ATTR{type}=="1", KERNEL=="eth*", NAME="eth2" * dmesg * [ 2.385241] ssb: Found chip with id 0x4311, rev 0x01 and package 0x00 [ 2.385256] ssb: Core 0 found: ChipCommon (cc 0x800, rev 0x11, vendor 0x4243) [ 2.385266] ssb: Core 1 found: IEEE 802.11 (cc 0x812, rev 0x0A, vendor 0x4243) [ 2.385276] ssb: Core 2 found: USB 1.1 Host (cc 0x817, rev 0x03, vendor 0x4243) [ 2.385286] ssb: Core 3 found: PCI-E (cc 0x820, rev 0x01, vendor 0x4243) [ 2.448147] ssb: Sonics Silicon Backplane found on PCI device 0000:05:00.0 [ 2.468112] ssb: Found chip with id 0x4401, rev 0x02 and package 0x00 [ 2.468124] ssb: Core 0 found: Fast Ethernet (cc 0x806, rev 0x07, vendor 0x4243) [ 2.468132] ssb: Core 1 found: V90 (cc 0x807, rev 0x03, vendor 0x4243) [ 2.468140] ssb: Core 2 found: PCI (cc 0x804, rev 0x0A, vendor 0x4243) [ 2.508230] ssb: Sonics Silicon Backplane found on PCI device 0000:06:01.0 [ 2.528620] b44 ssb1:0 eth0: Broadcom 44xx/47xx 10/100 PCI ethernet driver ******** done ******** Thank you already for your help.

    Read the article

  • My computer freezes irregularly

    - by Manhim
    My computer started to freeze at irregular times for 3 weeks now. Please note that this question change with each things that i try. (For additional details) What happens My computer freezes, the video stops. (No graphic glitches, it just stops) Sound keeps playing up to some time (Usually 10-30 seconds) then stops playing. Sometimes, randomly, the screen on my G-15 keyboard flickers and I see caracters not at the right places. Usually happens for about 1-2 seconds and a bit before my computer freezes. I have to keep the power button pressed for 4 seconds to shut my computer down. I still hear my hard drives and fans working. Sometimes it works with no problems for a full day, some other times it just keeps freezing each time I restart my computer and I have to leave it for the rest of the day. Sometimes my mouse freezes for a fraction of a second (Like 0.01 to 0.2 seconds) quite randomly, usually before it freezes. No errors spotted by the "Action center" unlike when I had problems with my last video card on this system (Driver errors). My G-15 LCD screen also freezes. Sometimes my G-15 LCD screen flickers and caracters gets caried around temporary under heavy load. Now, most of the times, the BIOS hard disks boot order gets reversed for some reason and I have to put it to the right one and save each times I boot. (Might be unrelated, not sure, but it first started yesterday) Sometimes the BIOS doesn't detect my 750GB hard drive plugged in SATA1. What I did so far I have had similar problems in the past and I had changed my hard drive (It was faulty), so I tested my software RAID-0 array and it was faulty so I changed it. (I reinstalled Windows 7 with this part). I also tested with unplugging my secondary hard drive. My CPU was running at about 100 degree Celsius, I removed the dust between the fans and the heatsink and it's now between 45-55. I ran a CPU stress-test and it didn't freeze during the tests (using Prime95 on all cores) Ran a memory test (using memtest86+) for a single pass and there were no errors. Ran a GPU stress test with ati-tools and furmark and it didn't freeze during the tests. (No artefacts either) I had troubles with my graphic card when I got it, but I think that it got fixed with a driver update. I checked the voltages in my BIOS setup and they all seemed ok (±0.2 I think). I have ran on the computer without problems with Fedora 15 on an external hard drive (Appart that it couldn't load Gnome 3 and was reverting to Gnome 2, didn't want to install drivers since I use it on multiple computers) I used it to backup my files from the raid array to my 1TB hard drive for the reinstallation of Windows. (So the crashes only happenned on Windows) [The external hard drive is plugged directly on a SATA port] I contacted EVGA (My graphic card vendor) and pointed them on this question, I'm looking for an answer. Ran sensors on Fedora 15 and got this output: http://pastebin.com/0BHJnAvu Ran 6 short different CPU stress test on Fedora 15 (Haven't found any complete stress testers for Linux) and it didn't crash. Changed the thermal paste to some Artic Silver 5 for my CPU and stress tested the CPU, temperature was at 50 idle, then 64 highest and slowly went down to 62 during the test. Ran some stress testing with a temporary graphic card and it went ok. Ran furmark stress test with my original graphic card and it freezed again. GPU had a temp of 74C, a CPU temp of 58C and a mobo temp of 40C or 45C (Dunno which one it is from SpeedFan). Ran a furmark stress test and a CPU stress test at the same time, results: http://pastebin.com/2t6PLpdJ I have been using my computer without stressing it for about 2 hours now and no crashes yet. I also have disabled the AMD Cool'n'quiet function on the BIOS for a more regular power to the CPU. When I ran Furmark without C'n'q my computer didn't freeze but I had a "Driver Kernel Error" that have recovered (And Furmark crashed) all that while running a CPU stress test. The computer eventually frozed without me being at it, but this time my screen just went on sleep and I couldn't wake it. Using the stability tester in nTune my computer freezed again (In the same manner as before). I notived that Speedfan gives me a -12V of -16.97V and a -5V of -8.78V. I wonder if these numbers are reliable and if they are good or bad. I have swapped my G-15 with another basic USB keyboard (HP) and I have ran furmark for about 10 minutes with a CPU stability test running each 60 seconds for 30 seconds and my computer haven't crashed yet. Ran some more extended tests without my G-15 and it freezed like it usually do. Removed the nForce Hard disk controler. Disabled command queuing in the NVIDIA nForce SATA Controller for both port 0 and port 1 (Errors from the logs) Used CPUID HwMonitor, here are the voltages: http://pastebin.com/dfM7p4jV Changed some configurations in the motherboard BIOS: Disabled PEG Link Mode, Changed AI Tuning to Standard, Disabled the 1394 Controller, Disabled HD Audio, Disabled JMicron RAID controller and Disabled SATA Raid. When it happens When I play video games (Mostly) When I play flash games (Second most) When I'm looking at my desktop background (It rarely happens when I have a window open, but it does, sometimes) When my Graphic card and my CPU are stressed. Sometimes when my Graphic card is stressed. Never happenned while stressing only the CPU. Sometimes when my CPU is stressed. Specs Windows Seven x64 Home Premium Motherboard: M2N-SLI Deluxe CPU: AMD Phenom 9950 x2 @ 2.6GHz Memory: Kingston 4x2GB Dual Channel (Pretty basic memory sticks) Hard drives: Was 2x250GB (Western digital caviar) in raid-0 + 1TB (WD caviar black), I replaced the raid array with a 750GB (WD caviar black) [Yes I removed the array from the raid configurations] 750W Power supply No overcloking. Ever. There have been some power-downs like 4-5 weeks ago, but the problem didn't start immediately after. (I wasn't home, so my computer got shut-down) Event logs (Warnings, errors and critical errors) for the last 24 hours: http://pastebin.com/Bvvk31T7 My current to-try list Reinstall the drivers and software 1 by 1 and do extensive stress testing between each. Update the BIOS firmware to the most recent stable one. Change my motherboard. Status updates Keeping only the last 3 (28/06 04pm) More stress testing and still pass the tests. (28/06 03pm) Been stress testing for 10 minute straight now and 5 minutes with both CPU and GPU being stressed at the same time. (28/06 03pm) Stress-testing right now, so far no problems. A little hope Tests with Furmark and Prime95. Testing Windows bare-bone: 30 Minutes stress, no freeze. Installing an Anti-virus and some software, restarting computer. Testing with Anti-virus and some software (No drivers installed): 30 Minutes stress, no freeze. Installing audio drivers, restarting computer. Testing with the audio drivers: 30 Minutes stress, no freeze. Installing the latest graphic drivers from EVGA's website (without 3d vision since I don't use it), restarting computer. Testing with the graphic drivers: 30 Minutes stress, no freeze. Configuring Windows to my liking and installing more softwares. In this situation, how can I successfully pin-point the current hardware problem? (If it's a hardware problem) Because I don't really have the budget to just forget and replace everything. I also don't really have hardware to test-replace current hardware.

    Read the article

  • Bitmask data insertions in SSDT Post-Deployment scripts

    - by jamiet
    On my current project we are using SQL Server Data Tools (SSDT) to manage our database schema and one of the tasks we need to do often is insert data into that schema once deployed; the typical method employed to do this is to leverage Post-Deployment scripts and that is exactly what we are doing. Our requirement is a little different though, our data is split up into various buckets that we need to selectively deploy on a case-by-case basis. I was going to use a SQLCMD variable for each bucket (defaulted to some value other than “Yes”) to define whether it should be deployed or not so we could use something like this in our Post-Deployment script: IF ($(DeployBucket1Flag) = 'Yes')BEGIN   :r .\Bucket1.data.sqlENDIF ($(DeployBucket2Flag) = 'Yes')BEGIN   :r .\Bucket2.data.sqlENDIF ($(DeployBucket3Flag) = 'Yes')BEGIN   :r .\Bucket3.data.sqlEND That works fine and is, I’m sure, a very common technique for doing this. It is however slightly ugly because we have to litter our deployment with various SQLCMD variables. My colleague James Rowland-Jones (whom I’m sure many of you know) suggested another technique – bitmasks. I won’t go into detail about how this works (James has already done that at Using a Bitmask - a practical example) but I’ll summarise by saying that you can deploy different combinations of the buckets simply by supplying a different numerical value for a single SQLCMD variable. Each bit of that value’s binary representation signifies whether a particular bucket should be deployed or not. This is better demonstrated using the following simple script (which can be easily leveraged inside your Post-Deployment scripts): /* $(DeployData) is a SQLCMD variable that would, if you were using this in SSDT, be declared in the SQLCMD variables section of your project file. It should contain a numerical value, defaulted to 0. In this example I have declared it using a :setvar statement. Test the affect of different values by changing the :setvar statement accordingly. Examples: :setvar DeployData 1 will deploy bucket 1 :setvar DeployData 2 will deploy bucket 2 :setvar DeployData 3   will deploy buckets 1 & 2 :setvar DeployData 6   will deploy buckets 2 & 3 :setvar DeployData 31  will deploy buckets 1, 2, 3, 4 & 5 */ :setvar DeployData 0 DECLARE  @bitmask VARBINARY(MAX) = CONVERT(VARBINARY,$(DeployData)); IF (@bitmask & 1 = 1) BEGIN     PRINT 'Bucket 1 insertions'; END IF (@bitmask & 2 = 2) BEGIN     PRINT 'Bucket 2 insertions'; END IF (@bitmask & 4 = 4) BEGIN     PRINT 'Bucket 3 insertions'; END IF (@bitmask & 8 = 8) BEGIN     PRINT 'Bucket 4 insertions'; END IF (@bitmask & 16 = 16) BEGIN     PRINT 'Bucket 5 insertions'; END An example of running this using DeployData=6 The binary representation of 6 is 110. The second and third significant bits of that binary number are set to 1 and hence buckets 2 and 3 are “activated”. Hope that makes sense and is useful to some of you! @Jamiet P.S. I used the awesome HTML Copy feature of Visual Studio’s Productivity Power Tools in order to format the T-SQL code above for this blog post.

    Read the article

  • Install server 2012 on HP ML110 G7 with B110i controller, no disks found

    - by Molotch
    I'm trying to install Server 2012 on a HP ML110 G7 with a B110i controller and four non hot-swappable SATA drives. I just can't get the Server 2012 boot disk PE environment to find any disks. I have downloaded the latest SPP (Service Pack for Proliant 2012.10) and flashed the BIOS. I have tried two different HP drivers for B110i and Windows X64, 6.18.0.64 and 6.18.2.64 to no avail. I have tried setting the controller to both AHCI and legacy mode in the BIOS, no difference. HP:s SmartStart disc for G7 servers only support installation of up to Windows Server 2008R2. HP:s installation instructions for Server 2012 Essentials says boot from the windows disk and use the storage drivers found on the SPP (I can't find any storage drivers on the SPP disk).

    Read the article

  • Rotate monitor to portrait on Windows Server 2003 with ATI card

    - by Eli
    Does anyone know if it is possible to rotate a monitor from landscape to portrait mode on Windows Server 2003 32-bit with an ATI video card? According to Dell's site, I should be able to rotate my Dell P2310H monitor by installing drivers from their website, but they don't have drivers for Windows Server 2003. I let Windows Update search for the driver (with the driver CD that came with the monitor in my drive) and it did install drivers, but I still don't see any options for rotating. Some people say that the ATI Catalyst Control Center allows for monitor rotation, but I've never been able to run that software on Windows Server 2003. A google search reports that others have the same problem. Has anyone successfully figured out how to rotate a monitor on Windows Server 2003 with an ATI card?

    Read the article

  • Why jquery have problem with onbeforeprint even?

    - by Cesar Lopez
    Hi all, I have the following function. $(function() { $(".sectionHeader:gt(0)").click(function() { $(this).next(".fieldset").slideToggle("fast"); }); $("img[alt='minimize']").click(function(e) { $(this).closest("table").next(".fieldset").slideUp("fast"); e.stopPropagation(); return false; }); $("img[alt='maximize']").click(function(e) { $(this).closest("table").next(".fieldset").slideDown("fast"); e.stopPropagation(); return false; }); }); <script type="text/javascript"> window.onbeforeprint = expandAll; function expandAll(){ $(".fieldset:gt(0)").slideDown("fast"); } </script> For this html <table class="sectionHeader" ><tr ><td>Heading 1</td></tr></table> <div style="display:none;" class="fieldset">Content 1</div> <table class="sectionHeader" ><tr ><td>Heading 2</td></tr></table> <div style="display:none;" class="fieldset">Content 2</div> I have several div class="fieldset" over the page, but when I do print preview or print, I can see all divs sliding down before opening the print preview or printing but on the actual print preview or print out they are all collapse. I would appreciate if anyone comes with a solution for this. Anyone have any idea why is this or how to fix it? Thanks. PS:Using a does not work either ( I assume because jquery using toggle) and its not the kind of question I am looking for.

    Read the article

  • How to write to Tomcat log files

    - by Ankur
    What is the easiest way to print out something in a Tomcat Log file. I was under the impression that System.out.println() would print to one of the log files. I just want to print out the value of a string, so the simplest solution would be best. If there is no simple/trivial solution I guess I will use Log4J

    Read the article

  • Problem using Polar Irda device in Windows Server 2008

    - by AngrySpade
    I'm attempting to use the Polar IrDA device with Windows Server 2008 R2 x64. Although they dont make explicit drivers for it, I figured the Windows 7 x64 drivers would do. http://www.polar.fi/en/support/downloads?product=&category=Software&documenttitle=Polar+IrDA+USB+Adapter+drivers&document=/gip/PKBStoGIP.nsf/web_cat/C225742500419A8AC2257458003D3F40 The device has a yellow warning icon in Device Manager. Windows cannot start this hardware device because its configuration information (in the registry) is incomplete or damaged. (Code 19) Is there anything I can do about this?

    Read the article

  • Creating a Reverse Proxy using Jpcap

    - by Ramon Marco Navarro
    I need to create a program that receives HTTP request and forwards those requests to the web servers. I have successfully made this using only Java Sockets but the client needed the program to be implemented in Jpcap. I'd like to know if this is possible and what literature I should be reading for this project. This is what I have now by stitching together pieces from the Jpcap tutorial: import java.net.InetAddress; import java.io.*; import jpcap.*; import jpcap.packet.*; public class Router { public static void main(String args[]) { //Obtain the list of network interfaces NetworkInterface[] devices = JpcapCaptor.getDeviceList(); //for each network interface for (int i = 0; i < devices.length; i++) { //print out its name and description System.out.println(i+": "+devices[i].name + "(" + devices[i].description+")"); //print out its datalink name and description System.out.println(" datalink: "+devices[i].datalink_name + "(" + devices[i].datalink_description+")"); //print out its MAC address System.out.print(" MAC address:"); for (byte b : devices[i].mac_address) System.out.print(Integer.toHexString(b&0xff) + ":"); System.out.println(); //print out its IP address, subnet mask and broadcast address for (NetworkInterfaceAddress a : devices[i].addresses) System.out.println(" address:"+a.address + " " + a.subnet + " "+ a.broadcast); } int index = 1; // set index of the interface that you want to open. //Open an interface with openDevice(NetworkInterface intrface, int snaplen, boolean promics, int to_ms) JpcapCaptor captor = null; try { captor = JpcapCaptor.openDevice(devices[index], 65535, false, 20); captor.setFilter("port 80 and host 192.168.56.1", true); } catch(java.io.IOException e) { System.err.println(e); } //call processPacket() to let Jpcap call PacketPrinter.receivePacket() for every packet capture. captor.loopPacket(-1,new PacketPrinter()); captor.close(); } } class PacketPrinter implements PacketReceiver { //this method is called every time Jpcap captures a packet public void receivePacket(Packet p) { JpcapSender sender = null; try { NetworkInterface[] devices = JpcapCaptor.getDeviceList(); sender = JpcapSender.openDevice(devices[1]); } catch(IOException e) { System.err.println(e); } IPPacket packet = (IPPacket)p; try { // IP Address of machine sending HTTP requests (the client) // It's still on the same LAN as the servers for testing purposes. packet.dst_ip = InetAddress.getByName("192.168.56.2"); } catch(java.net.UnknownHostException e) { System.err.println(e); } //create an Ethernet packet (frame) EthernetPacket ether=new EthernetPacket(); //set frame type as IP ether.frametype=EthernetPacket.ETHERTYPE_IP; //set source and destination MAC addresses // MAC Address of machine running reverse proxy server ether.src_mac = new MacAddress("08:00:27:00:9C:80").getAddress(); // MAC Address of machine running web server ether.dst_mac = new MacAddress("08:00:27:C7:D2:4C").getAddress(); //set the datalink frame of the packet as ether packet.datalink=ether; //send the packet sender.sendPacket(packet); sender.close(); //just print out a captured packet System.out.println(packet); } } Any help would be greatly appreciated. Thank you.

    Read the article

  • problem in fonts type and fonts size on printing

    - by user1400
    hello i have a application on php that i show a report in the table , i want to print this page i can see my page fine in print preview , but when i send thuis page to printer ,the fonts are small and diffrent fonts that i set in css file this is my css file @page { size: A4 landscape; margin-top:2cm; margin-bottom:1cm; margin-left:1cm; margin-right:1cm; } table.print{ text-align:right; border:#999 1px solid; } table.print td.e1{ border-top:#999 1px solid; padding:5px 2px; text-align: right; font-size: 20pt; font-family:"stencil"; } table.print td.e2{ border-top:#999 1px solid; padding:5px 2px; text-align: right; font-size: 120%; font-family:"tahoma"; } thanks

    Read the article

  • UnboundLocalError: local variable 'rows' referenced before assignment

    - by patrick
    i'm trying to make a database connection by an other script. But the script didn't work propperly. and if I do a 'print' on the rows then I get the value 'null' But if I use a 'select * from incidents' query then i get the result from the table incidents. import database rows = database.database("INSERT INTO incidents VALUES(3 ,'test_title1', 'test', TO_DATE('25-07-2012', 'DD-MM-YYYY'), CURRENT_TIMESTAMP, 'sector', 50, 60)") #print database.database() print rows database.py script: import psycopg2 import sys import logfile def database(query): logfile.log(20, 'database.py', 'Executing...') con = None try: con = psycopg2.connect(database='incidents', user='ipfit5', password='tester') cur = con.cursor() #print query cur.execute(query) rows = cur.fetchall() con.commit() #test row does work #cur.execute("INSERT INTO incidents VALUES(3 ,'test_titel1', 'test', TO_DATE('25-07-2012', 'DD-MM-YYYY'), CURRENT_TIMESTAMP, 'sector', 50, 60)") except: logfile.log(40, 'database.py', 'Er is iets mis gegaan') logfile.log(40, 'database.py', str(sys.exc_info())) finally: if con: con.close() return rows

    Read the article

  • Ruby IRC bot don't works.

    - by JavaNoob
    require "socket" server = "irc.rizon.net" port = "6667" nick = "Ruby IRC Bot" channel = "#0x40" s = TCPSocket.open(server, port) s.print("USER Testing", 0) s.print("NICK #{nick}", 0) s.print("JOIN #{channel}", 0) This irc bot don't connect to the IRC server, What are i'm doing wrong?

    Read the article

  • Why do I get 'use: command not found' when I run my Perl script?

    - by [email protected]
    I'm new to Perl. And I have used following code from one forum to connect to one of the server. but throwing error messages [root@Cus]# cat tt.pl #!/usr/bin/perl use Net::Telnet; $telnet = new Net::Telnet ( Timeout=>2, Errmode=>'die'); $telnet->open('10.0.0.28'); $telnet->waitfor('/login:/'); $telnet->print('administrator'); $telnet->waitfor('/Password:/'); $telnet->print('test'); $telnet->waitfor('/switch8-12>/'); $telnet->print('whoamI'); $output=$telnet->waitfor('/switch8-12>/'); print $output; But throwing following error messages. [root@Cus]# ./tt.pl ./tt.pl: line 3: use: command not found ./tt.pl: line 4: syntax error near unexpected token `(' ./tt.pl: line 4: `$telnet = new Net::Telnet ( Timeout=>2, Errmode=>'die');'

    Read the article

  • drupal - override form action?

    - by n00b0101
    I originally started this question in another thread, but that thread was sorta, kinda answered, and now I primarily want to know how to specify another form action... I tried using the code below, but the form action, when output, remains unchanged, although looking at the print_r($form), it's correctly changed... Why isn't it picking up? function mytheme_user_profile_form($form) { global $user; $uid = $user->uid; //print '<pre>'; print_r($form); print '</pre>'; $category = $form['_category']['#value']; switch($category) { case 'account': $form['#action'] = '/user/'.$uid.'/edit?destination=user/'.$uid; break; case 'education': $form['#action'] = '/user/'.$uid.'/edit/education?destination=user/'.$uid; break; case 'experience': $form['#action'] = '/user/'.$uid.'/edit/experience?destination=user/'.$uid; break; case 'publications': $form['#action'] = '/user/'.$uid.'/edit/publications?destination=user/'.$uid; break; case 'conflicts': $form['#action'] = '/user/'.$uid.'/edit/conflicts?destination=user/'.$uid; break; } //print '<pre>'; print_r($form); print '</pre>'; //print $form['#action']; $output .= drupal_render($form); return $output;

    Read the article

  • Connect to remote server

    - by [email protected]
    Hi All, I'm new to perl. And I have used following code from one forum to connect to one of the server. but throwing error messages [root@Cus]# cat tt.pl #!/usr/bin/perl use Net::Telnet; $telnet = new Net::Telnet ( Timeout=>2, Errmode=>'die'); $telnet->open('10.0.0.28'); $telnet->waitfor('/login:/'); $telnet->print('administrator'); $telnet->waitfor('/Password:/'); $telnet->print('test'); $telnet->waitfor('/switch8-12>/'); $telnet->print('whoamI'); $output=$telnet->waitfor('/switch8-12>/'); print $output; But throwing following error messages. [root@Cus]# ./tt.pl ./tt.pl: line 3: use: command not found ./tt.pl: line 4: syntax error near unexpected token `(' ./tt.pl: line 4: `$telnet = new Net::Telnet ( Timeout=>2, Errmode=>'die');'

    Read the article

  • Windows 7 / ATI CCC - Monitor limit?

    - by james.ingham
    Hi all, I have a Ati 4850 X2 and back in the days when Windows 7 was in beta, I had this running with 4 monitors (Crossfire off). Now I have come to set this up again, with a RTM version of Windows 7 and the latest ATI drivers and it seems I can only have two monitors on at one time. If I try and set the monitors up in Control Panel, it simply disables the non-primary monitor, and if I attempt to do it in CCC, I get the message "To extend the desktop, a desktop or display must be disabled." Does anyone know why this is and/or how to fix it? I've currently tried using the latest ATI drivers and the drivers (i think) I was using over a year ago when I had this setup. Thanks - James

    Read the article

  • how to get Celsius as output from LM335Z with arduino?

    - by wizztjh
    the firstsensor is my lm335z output. int firstSensor = 0; int secondSensor = 0; int thirdSensor = 0; int inByte = 0; void setup() { Serial.begin(9600); establishContact(); // send a byte to establish contact until receiver responds } void loop() { if (Serial.available() > 0) { inByte = Serial.read(); firstSensor = analogRead(0); delay(10); secondSensor = analogRead(1); thirdSensor = analogRead(2); Serial.print(firstSensor, DEC); Serial.print(","); Serial.print(secondSensor, DEC); Serial.print(","); Serial.println(thirdSensor, DEC); } } void establishContact() { }

    Read the article

  • Use a System.Drawing.Printing.PrintDocument to generate a PDF in memory

    - by MarkB29
    Does anyone know if the following is possible and if so what the best way of doing it is for free? I am generating a PrintDocument in a project I am currently working on and displaying a print dialog box so a user can choose which printer they want to use etc. The is currently a windows form application and if a user wants to print to a PDF they can select to print to CutePDF or something similar. However I am now putting a ASP.Net web frontend on the application and want to use the same code to generate the PrintDocument but want to print it to a PDF on the fly and serve it up via the Response stream in the format of a PDF download. So my question is....How can I use the current PrintDocument and generate a PDF in memory from it?? Thanks

    Read the article

  • How to read Unicode characters from command-line arguments in Python on Windows

    - by Craig McQueen
    I want my Python script to be able to read Unicode command line arguments in Windows. But it appears that sys.argv is a string encoded in some local encoding, rather than Unicode. How can I read the command line in full Unicode? Example code: argv.py import sys first_arg = sys.argv[1] print first_arg print type(first_arg) print first_arg.encode("hex") print open(first_arg) On my PC set up for Japanese code page, I get: C:\temp>argv.py "PC·??????08.09.24.doc" PC·??????08.09.24.doc <type 'str'> 50438145835c83748367905c90bf8f9130382e30392e32342e646f63 <open file 'PC·??????08.09.24.doc', mode 'r' at 0x00917D90> That's Shift-JIS encoded I believe, and it "works" for that filename. But it breaks for filenames with characters that aren't in the Shift-JIS character set—the final "open" call fails: C:\temp>argv.py Jörgen.txt Jorgen.txt <type 'str'> 4a6f7267656e2e747874 Traceback (most recent call last): File "C:\temp\argv.py", line 7, in <module> print open(first_arg) IOError: [Errno 2] No such file or directory: 'Jorgen.txt' Note—I'm talking about Python 2.x, not Python 3.0. I've found that Python 3.0 gives sys.argv as proper Unicode. But it's a bit early yet to transition to Python 3.0 (due to lack of 3rd party library support). Update: A few answers have said I should decode according to whatever the sys.argv is encoded in. The problem with that is that it's not full Unicode, so some characters are not representable. Here's the use case that gives me grief: I have enabled drag-and-drop of files onto .py files in Windows Explorer. I have file names with all sorts of characters, including some not in the system default code page. My Python script doesn't get the right Unicode filenames passed to it via sys.argv in all cases, when the characters aren't representable in the current code page encoding. There is certainly some Windows API to read the command line with full Unicode (and Python 3.0 does it). I assume the Python 2.x interpreter is not using it.

    Read the article

< Previous Page | 113 114 115 116 117 118 119 120 121 122 123 124  | Next Page >