Search Results

Search found 4864 results on 195 pages for 'resolv conf'.

Page 117/195 | < Previous Page | 113 114 115 116 117 118 119 120 121 122 123 124  | Next Page >

• Trixbox: external SIP with no sound

  - by Leandro Vidal

  I have a trixbox server and every works find except the external SIPs. Inside net all sound goes fine, but if I use a SIP phone outside the net, I can connect, I can receive calls but I there is no sound. I have this text in the sip_nat.conf: nat=yes externhost=xxxxx.dyndns.org localnet=192.168.1.0/255.255.255.0 localhost=192.168.1.210 externrefresh=10 qualify=yes And I have the ports from 5036 to 5082, 4569 and from 10000 to 20000 redirected to 192.168.1.210 on TCP and UDP. What's wrong? Thank you very much in advance

  Read the article

• Cannot see http (apache) server outside home network

  - by user165155

  Ive been racking my brain with this all evening. Power went out with a tstorm today, started back up my server... running apache and a team speak server on it. TS is great, cant see my web page outside my network! Firewall is disabled on the pc running it (centos btw), apache is running and working. correct ports are forwarded on my router (my isp blocks port 80). Ive tried changing ports, pretty much everything i can think of. httpd.conf is pointing to the correct addy and port, and my domain is pointing to the correct external ip. Im at a loss, any ideas out there?

  Read the article

• How to directly send *.php.html files to browser without passing throught PHP? (Apache)

  - by Cédric Girard

  Hi, on my Apache/PHP server, file test.php.html is parsed by PHP, while test.html is not. PHPDOC create a lot of *.php.html files, with a XML header wich is a pain for PHP parser, but how to tell Apache not to pass *.php.html file to PHP and just send back the file to browser? My php.conf file <IfModule prefork.c> LoadModule php5_module modules/libphp5.so </IfModule> <IfModule worker.c> LoadModule php5_module modules/libphp5-zts.so </IfModule> AddHandler php5-script .php AddType text/html .php What can I do? Thanks, Bests regards Cédric

  Read the article

• Apache - setting up a subdomain

  - by Adam

  I'm having trouble getting a subdomain working for an Apache Linux Install. Following is what I've configured: DNS: connect.goneglobal.com. CNAME 54.251.35.112 Apache httpd.conf: <VirtualHost *:80> DocumentRoot /var/www/html/connect.goneglobal.com ServerName connect.goneglobal.com </VirtualHost> restart httpd - this ip is registered to this server - works for other sites on this apache. (first time I've tried a subdomain). Appears the issue is with DNS potentially and it doesn't seem to get to the site. Note: I have an index.php in the Documentroot. Note: there is an A record for goneglobal.com. which goes to a different hosting provider. thx

  Read the article

• Bonding: works only from one link

  - by Crazy_Bash

  I would like to install bonding with 4 links. but only one of them is active. eth4 is always active. the others simply don't work. those are my configs: DEVICE="eth2" BOOTPROTO="none" MASTER=bond0 SLAVE=yes USERCTL=no NM_CONTROLLED="no" ONBOOT="yes" DEVICE="eth3" BOOTPROTO="none" MASTER=bond0 SLAVE=yes USERCTL=no NM_CONTROLLED="no" ONBOOT="yes" DEVICE="eth4" BOOTPROTO="none" MASTER=bond0 SLAVE=yes USERCTL=no NM_CONTROLLED="no" ONBOOT="yes" DEVICE="eth5" BOOTPROTO="none" MASTER=bond0 SLAVE=yes USERCTL=no NM_CONTROLLED="no" ONBOOT="yes" DEVICE=bond0 IPADDR=<ip> BROADCAST=<ip> NETWORK=<ip> GATEWAY=<ip> NETMASK=<ip> USERCTL=no BOOTPROTO=none ONBOOT=yes NM_CONTROLLED=no /etc/modprobe.d/bonding.conf alias bond0 bonding options bond0 mode=4 miimon=100 updelay=200 #downdelay=200 xmit_hash_policy=layer3+4 lacp_rate=1 Linux: Linux 3.0.0+ #1 SMP Fri Oct 26 07:55:47 EEST 2012 x86_64 x86_64 x86_64 GNU/Linux what i've tried: downdelay=200 xmit_hash_policy=layer3+4 lacp_rate=1

  Read the article

• Keep context-configuration when redeploying via Cargo

  - by Björn Pollex

  I am using Tomcat 7 to host a web-application that requires a JNDI datasource to be set up. Because this resource is specific to this application, I would like to configure it inside the application-specific context-descriptor in $CATALINA_BASE/conf/[enginename]/[hostname]/. I am also using Cargo from Maven to deploy the web-application to Tomcat. The problem is that when I do a redeploy with Cargo, it first undeploys the application, before deploying it again. When undeploying it, Tomcat deletes the context-descriptor of the application, so it won't work after redeploying. I could of course package the context-descriptor with the application, but I would like to keep any such container-specifics out of the .war. Another alternative is to configure the datasource in the global context-descriptor, but that too seems wrong, because the datasource is supposed to be exclusive to my application. Is my approach fundamentally wrong? What is the best practice here? Is there any way to prevent Tomcat from deleting the descriptor when undeploying?

  Read the article

• QNAP ftp: hide Mac OSX hidden files .DS_Store and others

  - by tobia.zanarella

  I am using a QNAP as an FTP server. Users access this NAS from their Mac OSX Lion clients and put files and folders inside the QNAP shares, which are later being accessed via FTP from external points. The problem is that inside the folders uploaded to the QNAP folders Mac OS leaves its .DS_Store and .* hidden files. I know that for a Samba share, for example, I need to add two lines to the /etc/samba/smb.conf file: veto files = /._*/.DS_Store/ delete veto files = yes But what can I do on a QNAP FTP service? Thank you.

  Read the article

• haproxy not passing X_FORWARD_FOR on HTTP POST

  - by Mark L

  Hello, I've setup HAProxy with the option forwardfor option so it'll pass on the user's IP to PHP via $_SERVER[ "HTTP_X_FORWARDED_FOR" ]. If the page request isn't a POST it's populated fine but if it is then it won't be populated. Any ideas where I've gone wrong? Thanks everyone! My whole HAProxy conf file for reference: global log 127.0.0.1 local0 log 127.0.0.1 local1 notice #log loghost local0 info maxconn 4096 #chroot /usr/share/haproxy user haproxy group haproxy daemon #debug #quiet defaults log global mode http option httplog option dontlognull retries 3 option redispatch maxconn 4096 contimeout 5000 clitimeout 50000 srvtimeout 50000 listen webfarm :80 mode http balance roundrobin option forwardfor server webA 192.168.240.4 weight 1 maxconn 2048 check server webB 192.168.240.3 weight 1 maxconn 2048 check listen smtp :25 mode tcp option tcplog balance roundrobin server smtp 192.168.240.4:25 check

  Read the article

• Virtualmin - Added Virtual Server - Stopped access to Rails app?

  - by Dan

  Hi, Sorry if this sounds pretty simple, I'm new to Virtualmin and running servers in general. I recently purchased a VPS and installed Virtualmin with no problems. I then installed mod_rails and uploaded my first rails app, which I got working by adding the following to my apache httpd.conf file: <VirtualHost *:80> ServerName testing.mydomain.com DocumentRoot /home/myapp/public <Directory /home/myapp/public> Allow from All AllowOverride all Options -MultiViews </Directory> RailsBaseURI / </VirtualHost> I then tried adding a virtual server through Virtualmin, using mydomain.com. Now, the site this created (plus several sub-servers) and working as expected. However, my original Rails app is no longer accessible. The URL now sends me to the parent application (ie mydomain.com) The Rails app is not located within the parent's application directory, would this be a problem? Can anyone help? Any advice appreciated. Thanks.

  Read the article

• Making working passenger on working apache

  - by fl00r

  Hi! I've got Apache (-v): Server version: Apache/2.0.63 Server built: Nov 29 2009 15:23:34 Cpanel::Easy::Apache v3.2.0 rev4899 I want to start new Sinatra application on passenger. I've just installed passenger gem. So now I need to set up apache configuration. In httpd.conf there are many settings of others applications on server. So I just can't reinstall apache with passenger-install-apache2-module. I need to set up exist Apache with passenger. What have I do now?

  Read the article

• NIS client cannot find NIS server (Opensuse)

  - by Tony

  I installed NIS server on head node of a virtual cluster(VirtualBox). One of the node (let's say node-1) can find NIS server and work with it, but another node (node-2) just can't find the NIS server in Yast while it can ping and ssh to both head node and node-1. BTW, all the nodes are VMs, head node and node-1 are on the same physical machine, node-2 is on another physical machine. I set the domain name in /etc/hosts and /etc/yp.conf, and ypwhich sometimes gives the correct domainname several minutes later complains about "ypwhich: Can't communicate with ypbind", and will back to work after some time. Also tried rpcinfo -p hostname and it worked as expected. I almost tried every thing I can find on internet, but seems that not many people had this problem. Any help would be very appreciated.

  Read the article

• How to add exceptions to apache reverse proxy rules

  - by Tania

  I am trying to set a Apache reverse proxy so that requests get proxyed to another application running on 8080. However, I want some directories to be directly served rather than forwarded to proxy. What I want is: http://localhost/ - http:// localhost:8080/myapp http:// localhost/images - /var/www/html/images http:// localhost/anything-else - http:// localhost:8080/myapp/anyhthing-else My current httpd.conf is ProxyRequests Off ProxyTimeout 600 ProxyPreserveHost On ProxyPass / http:// localhost:8080/ ProxyPassReverse / http:// localhost:8080/ RewriteEngine On RewriteRule ^/(.*) http:// localhost:8080/VirtualHostBase/http/%{SERVER_NAME}:80/myapp/VirtualHostRoot/$1 [L,P] What configuration should I do to make the local path exception to work? Thank you, Tania

  Read the article

• Backup and restore Subversion user permissions

  - by Earth Engine

  We use svnsync to create fully functional backup servers, and we have a script to do so. However if we wanted to create a new backup server, we have to copy the htpasswd and groups.conf file across (that is not hard) and (after running svnsync) manually assign the user/group to repositories. Also, if we change the assignment in the main server, there is no easy way to apply that change to all backup servers. Since we have 50+ projects and 30+ users this is a boring and error-pond exercise. Are there any tools that can help us to backup and restore those automatically? We are using VisualSVN under Windows, so it is better to have solutions in Windows scripts, not shell scripts.

  Read the article

• Ubuntu 10.04 not detecting multiple monitors

  - by user28837

  I have 2 graphics cards, the output from the lspci: 01:00.0 VGA compatible controller: ATI Technologies Inc RV770 [Radeon HD 4850] 02:00.0 VGA compatible controller: ATI Technologies Inc RV710 [Radeon HD 4350] I have one monitor connected to the 4850 and 2 connected to the 4350. However when I go into System Preferences Monitors the only monitor shown is the one connected to the 4850. Is there something I need to enable for it to be able to use the other card? How do I get this to work. Thanks. As per request: X.Org X Server 1.7.6 Release Date: 2010-03-17 X Protocol Version 11, Revision 0 Build Operating System: Linux 2.6.24-25-server i686 Ubuntu Current Operating System: Linux jeff-desktop 2.6.32-22-generic-pae #33-Ubuntu SMP Wed Apr 28 14:57:29 UTC 2010 i686 Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.32-22-generic-pae root=UUID=852e1013-4ed6-40fd-a462-c29087888383 ro quiet splash Build Date: 23 April 2010 05:11:50PM xorg-server 2:1.7.6-2ubuntu7 (Bryce Harrington <[email protected]>) Current version of pixman: 0.16.4 Before reporting problems, check http://wiki.x.org to make sure that you have the latest version. Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. (==) Log file: "/var/log/Xorg.0.log", Time: Tue May 11 08:24:52 2010 (==) Using config file: "/etc/X11/xorg.conf" (==) Using config directory: "/usr/lib/X11/xorg.conf.d" (==) No Layout section. Using the first Screen section. (**) |-->Screen "Default Screen" (0) (**) | |-->Monitor "<default monitor>" (==) No device specified for screen "Default Screen". Using the first device section listed. (**) | |-->Device "Default Device" (==) No monitor specified for screen "Default Screen". Using a default monitor configuration. (==) Automatically adding devices (==) Automatically enabling devices (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist. Entry deleted from font path. (==) FontPath set to: /usr/share/fonts/X11/misc, /usr/share/fonts/X11/100dpi/:unscaled, /usr/share/fonts/X11/75dpi/:unscaled, /usr/share/fonts/X11/Type1, /usr/share/fonts/X11/100dpi, /usr/share/fonts/X11/75dpi, /var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType, built-ins (==) ModulePath set to "/usr/lib/xorg/extra-modules,/usr/lib/xorg/modules" (II) The server relies on udev to provide the list of input devices. If no devices become available, reconfigure udev or disable AutoAddDevices. (II) Loader magic: 0x81f0e80 (II) Module ABI versions: X.Org ANSI C Emulation: 0.4 X.Org Video Driver: 6.0 X.Org XInput driver : 7.0 X.Org Server Extension : 2.0 (++) using VT number 7 (--) PCI:*(0:1:0:0) 1002:9442:174b:e104 ATI Technologies Inc RV770 [Radeon HD 4850] rev 0, Mem @ 0xc0000000/268435456, 0xfe7e0000/65536, I/O @ 0x0000a000/256, BIOS @ 0x????????/131072 (--) PCI: (0:2:0:0) 1002:954f:1462:1618 ATI Technologies Inc RV710 [Radeon HD 4350] rev 0, Mem @ 0xd0000000/268435456, 0xfe8e0000/65536, I/O @ 0x0000b000/256, BIOS @ 0x????????/131072 (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory) (II) "extmod" will be loaded by default. (II) "dbe" will be loaded by default. (II) "glx" will be loaded. This was enabled by default and also specified in the config file. (II) "record" will be loaded by default. (II) "dri" will be loaded by default. (II) "dri2" will be loaded by default. (II) LoadModule: "glx" (II) Loading /usr/lib/xorg/extra-modules/modules/extensions/libglx.so (II) Module glx: vendor="FireGL - ATI Technologies Inc." compiled for 7.5.0, module version = 1.0.0 (II) Loading extension GLX (II) LoadModule: "extmod" (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so (II) Module extmod: vendor="X.Org Foundation" compiled for 1.7.6, module version = 1.0.0 Module class: X.Org Server Extension ABI class: X.Org Server Extension, version 2.0 (II) Loading extension MIT-SCREEN-SAVER (II) Loading extension XFree86-VidModeExtension (II) Loading extension XFree86-DGA (II) Loading extension DPMS (II) Loading extension XVideo (II) Loading extension XVideo-MotionCompensation (II) Loading extension X-Resource (II) LoadModule: "dbe" (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so (II) Module dbe: vendor="X.Org Foundation" compiled for 1.7.6, module version = 1.0.0 Module class: X.Org Server Extension ABI class: X.Org Server Extension, version 2.0 (II) Loading extension DOUBLE-BUFFER (II) LoadModule: "record" (II) Loading /usr/lib/xorg/modules/extensions/librecord.so (II) Module record: vendor="X.Org Foundation" compiled for 1.7.6, module version = 1.13.0 Module class: X.Org Server Extension ABI class: X.Org Server Extension, version 2.0 (II) Loading extension RECORD (II) LoadModule: "dri" (II) Loading /usr/lib/xorg/modules/extensions/libdri.so (II) Module dri: vendor="X.Org Foundation" compiled for 1.7.6, module version = 1.0.0 ABI class: X.Org Server Extension, version 2.0 (II) Loading extension XFree86-DRI (II) LoadModule: "dri2" (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so (II) Module dri2: vendor="X.Org Foundation" compiled for 1.7.6, module version = 1.1.0 ABI class: X.Org Server Extension, version 2.0 (II) Loading extension DRI2 (II) LoadModule: "fglrx" (II) Loading /usr/lib/xorg/extra-modules/modules/drivers/fglrx_drv.so (II) Module fglrx: vendor="FireGL - ATI Technologies Inc." compiled for 1.7.1, module version = 8.72.11 Module class: X.Org Video Driver (II) Loading sub module "fglrxdrm" (II) LoadModule: "fglrxdrm" (II) Loading /usr/lib/xorg/extra-modules/modules/linux/libfglrxdrm.so (II) Module fglrxdrm: vendor="FireGL - ATI Technologies Inc." compiled for 1.7.1, module version = 8.72.11 (II) ATI Proprietary Linux Driver Version Identifier:8.72.11 (II) ATI Proprietary Linux Driver Release Identifier: 8.723.1 (II) ATI Proprietary Linux Driver Build Date: Apr 8 2010 21:40:29 (II) Primary Device is: PCI 01@00:00:0 (WW) Falling back to old probe method for fglrx (II) Loading PCS database from /etc/ati/amdpcsdb (--) Assigning device section with no busID to primary device (WW) fglrx: No matching Device section for instance (BusID PCI:0@2:0:0) found (--) Chipset Supported AMD Graphics Processor (0x9442) found (WW) fglrx: No matching Device section for instance (BusID PCI:0@1:0:1) found (WW) fglrx: No matching Device section for instance (BusID PCI:0@2:0:1) found (**) ChipID override: 0x954F (**) Chipset Supported AMD Graphics Processor (0x954F) found (II) AMD Video driver is running on a device belonging to a group targeted for this release (II) AMD Video driver is signed (II) fglrx(0): pEnt->device->identifier=0x9428aa0 (II) pEnt->device->identifier=(nil) (II) fglrx(0): === [atiddxPreInit] === begin (II) Loading sub module "vgahw" (II) LoadModule: "vgahw" (II) Loading /usr/lib/xorg/modules/libvgahw.so (II) Module vgahw: vendor="X.Org Foundation" compiled for 1.7.6, module version = 0.1.0 ABI class: X.Org Video Driver, version 6.0 (II) fglrx(0): Creating default Display subsection in Screen section "Default Screen" for depth/fbbpp 24/32 (**) fglrx(0): Depth 24, (--) framebuffer bpp 32 (II) fglrx(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps) (==) fglrx(0): Default visual is TrueColor (==) fglrx(0): RGB weight 888 (II) fglrx(0): Using 8 bits per RGB (==) fglrx(0): Buffer Tiling is ON (II) Loading sub module "fglrxdrm" (II) LoadModule: "fglrxdrm" (II) Reloading /usr/lib/xorg/extra-modules/modules/linux/libfglrxdrm.so ukiDynamicMajor: found major device number 251 ukiDynamicMajor: found major device number 251 ukiOpenByBusid: Searching for BusID PCI:1:0:0 ukiOpenDevice: node name is /dev/ati/card0 ukiOpenDevice: open result is 10, (OK) ukiOpenByBusid: ukiOpenMinor returns 10 ukiOpenByBusid: ukiGetBusid reports PCI:2:0:0 ukiOpenDevice: node name is /dev/ati/card1 ukiOpenDevice: open result is 10, (OK) ukiOpenByBusid: ukiOpenMinor returns 10 ukiOpenByBusid: ukiGetBusid reports PCI:1:0:0 ukiDynamicMajor: found major device number 251 ukiDynamicMajor: found major device number 251 ukiOpenByBusid: Searching for BusID PCI:2:0:0 ukiOpenDevice: node name is /dev/ati/card0 ukiOpenDevice: open result is 11, (OK) ukiOpenByBusid: ukiOpenMinor returns 11 ukiOpenByBusid: ukiGetBusid reports PCI:2:0:0 (--) fglrx(0): Chipset: "ATI Radeon HD 4800 Series" (Chipset = 0x9442) (--) fglrx(0): (PciSubVendor = 0x174b, PciSubDevice = 0xe104) (==) fglrx(0): board vendor info: third party graphics adapter - NOT original ATI (--) fglrx(0): Linear framebuffer (phys) at 0xc0000000 (--) fglrx(0): MMIO registers at 0xfe7e0000 (--) fglrx(0): I/O port at 0x0000a000 (==) fglrx(0): ROM-BIOS at 0x000c0000 (II) fglrx(0): AC Adapter is used (II) fglrx(0): Primary V_BIOS segment is: 0xc000 (II) Loading sub module "vbe" (II) LoadModule: "vbe" (II) Loading /usr/lib/xorg/modules/libvbe.so (II) Module vbe: vendor="X.Org Foundation" compiled for 1.7.6, module version = 1.1.0 ABI class: X.Org Video Driver, version 6.0 (II) fglrx(0): VESA BIOS detected (II) fglrx(0): VESA VBE Version 3.0 (II) fglrx(0): VESA VBE Total Mem: 16384 kB (II) fglrx(0): VESA VBE OEM: ATI ATOMBIOS (II) fglrx(0): VESA VBE OEM Software Rev: 11.13 (II) fglrx(0): VESA VBE OEM Vendor: (C) 1988-2005, ATI Technologies Inc. (II) fglrx(0): VESA VBE OEM Product: RV770 (II) fglrx(0): VESA VBE OEM Product Rev: 01.00 (II) fglrx(0): ATI Video BIOS revision 9 or later detected (--) fglrx(0): Video RAM: 524288 kByte, Type: GDDR3 (II) fglrx(0): PCIE card detected (--) fglrx(0): Using per-process page tables (PPPT) as GART. (WW) fglrx(0): board is an unknown third party board, chipset is supported (--) fglrx(0): Chipset: "ATI Radeon HD 4300/4500 Series" (Chipset = 0x954f) (--) fglrx(0): (PciSubVendor = 0x1462, PciSubDevice = 0x1618) (==) fglrx(0): board vendor info: third party graphics adapter - NOT original ATI (--) fglrx(0): Linear framebuffer (phys) at 0xd0000000 (--) fglrx(0): MMIO registers at 0xfe8e0000 (--) fglrx(0): I/O port at 0x0000b000 (==) fglrx(0): ROM-BIOS at 0x000c0000 (II) fglrx(0): AC Adapter is used (II) fglrx(0): Invalid ATI BIOS from int10, the adapter is not VGA-enabled (II) fglrx(0): ATI Video BIOS revision 9 or later detected (--) fglrx(0): Video RAM: 524288 kByte, Type: DDR2 (II) fglrx(0): PCIE card detected (--) fglrx(0): Using per-process page tables (PPPT) as GART. (WW) fglrx(0): board is an unknown third party board, chipset is supported (II) fglrx(0): Using adapter: 1:0.0. (II) fglrx(0): [FB] MC range(MCFBBase = 0xf00000000, MCFBSize = 0x20000000) (II) fglrx(0): Interrupt handler installed at IRQ 31. (II) fglrx(0): Using adapter: 2:0.0. (II) fglrx(0): [FB] MC range(MCFBBase = 0xf00000000, MCFBSize = 0x20000000) (II) fglrx(0): RandR 1.2 support is enabled! (II) fglrx(0): RandR 1.2 rotation support is enabled! (==) fglrx(0): Center Mode is disabled (II) Loading sub module "fb" (II) LoadModule: "fb" (II) Loading /usr/lib/xorg/modules/libfb.so (II) Module fb: vendor="X.Org Foundation" compiled for 1.7.6, module version = 1.0.0 ABI class: X.Org ANSI C Emulation, version 0.4 (II) Loading sub module "ddc" (II) LoadModule: "ddc" (II) Module "ddc" already built-in (II) fglrx(0): Finished Initialize PPLIB! (II) Loading sub module "ddc" (II) LoadModule: "ddc" (II) Module "ddc" already built-in (II) fglrx(0): Connected Display0: DFP on external TMDS [tmds2] (II) fglrx(0): Display0 EDID data --------------------------- (II) fglrx(0): Manufacturer: DEL Model: a038 Serial#: 810829397 (II) fglrx(0): Year: 2008 Week: 51 (II) fglrx(0): EDID Version: 1.3 (II) fglrx(0): Digital Display Input (II) fglrx(0): Max Image Size [cm]: horiz.: 53 vert.: 30 (II) fglrx(0): Gamma: 2.20 (II) fglrx(0): DPMS capabilities: StandBy Suspend Off (II) fglrx(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4 (II) fglrx(0): Default color space is primary color space (II) fglrx(0): First detailed timing is preferred mode (II) fglrx(0): redX: 0.640 redY: 0.330 greenX: 0.300 greenY: 0.600 (II) fglrx(0): blueX: 0.150 blueY: 0.060 whiteX: 0.312 whiteY: 0.329 (II) fglrx(0): Supported established timings: (II) fglrx(0): 720x400@70Hz (II) fglrx(0): 640x480@60Hz (II) fglrx(0): 640x480@75Hz (II) fglrx(0): 800x600@60Hz (II) fglrx(0): 800x600@75Hz (II) fglrx(0): 1024x768@60Hz (II) fglrx(0): 1024x768@75Hz (II) fglrx(0): 1280x1024@75Hz (II) fglrx(0): Manufacturer's mask: 0 (II) fglrx(0): Supported standard timings: (II) fglrx(0): #0: hsize: 1152 vsize 864 refresh: 75 vid: 20337 (II) fglrx(0): #1: hsize: 1280 vsize 1024 refresh: 60 vid: 32897 (II) fglrx(0): #2: hsize: 1920 vsize 1080 refresh: 60 vid: 49361 (II) fglrx(0): Supported detailed timing: (II) fglrx(0): clock: 148.5 MHz Image Size: 531 x 298 mm (II) fglrx(0): h_active: 1920 h_sync: 2008 h_sync_end 2052 h_blank_end 2200 h_border: 0 (II) fglrx(0): v_active: 1080 v_sync: 1084 v_sync_end 1089 v_blanking: 1125 v_border: 0 (II) fglrx(0): Serial No: Y183D8CF0TFU (II) fglrx(0): Monitor name: DELL S2409W (II) fglrx(0): Ranges: V min: 50 V max: 76 Hz, H min: 30 H max: 83 kHz, PixClock max 170 MHz (II) fglrx(0): EDID (in hex): (II) fglrx(0): 00ffffffffffff0010ac38a055465430 (II) fglrx(0): 3312010380351e78eeee91a3544c9926 (II) fglrx(0): 0f5054a54b00714f8180d1c001010101 (II) fglrx(0): 010101010101023a801871382d40582c (II) fglrx(0): 4500132a2100001e000000ff00593138 (II) fglrx(0): 3344384346305446550a000000fc0044 (II) fglrx(0): 454c4c205332343039570a20000000fd (II) fglrx(0): 00324c1e5311000a2020202020200059 (II) fglrx(0): End of Display0 EDID data -------------------- (II) fglrx(0): Output DFP2 has no monitor section (II) fglrx(0): Output DFP_EXTTMDS has no monitor section (II) fglrx(0): Output CRT1 has no monitor section (II) fglrx(0): Output CRT2 has no monitor section (II) fglrx(0): Output DFP2 disconnected (II) fglrx(0): Output DFP_EXTTMDS connected (II) fglrx(0): Output CRT1 disconnected (II) fglrx(0): Output CRT2 disconnected (II) fglrx(0): Using exact sizes for initial modes (II) fglrx(0): Output DFP_EXTTMDS using initial mode 1920x1080 (II) fglrx(0): DPI set to (96, 96) (II) fglrx(0): Adapter ATI Radeon HD 4800 Series has 2 configurable heads and 1 displays connected. (==) fglrx(0): QBS disabled (==) fglrx(0): PseudoColor visuals disabled (II) Loading sub module "ramdac" (II) LoadModule: "ramdac" (II) Module "ramdac" already built-in (==) fglrx(0): NoAccel = NO (==) fglrx(0): NoDRI = NO (==) fglrx(0): Capabilities: 0x00000000 (==) fglrx(0): CapabilitiesEx: 0x00000000 (==) fglrx(0): OpenGL ClientDriverName: "fglrx_dri.so" (==) fglrx(0): UseFastTLS=0 (==) fglrx(0): BlockSignalsOnLock=1 (--) Depth 24 pixmap format is 32 bpp (II) Loading extension ATIFGLRXDRI (II) fglrx(0): doing swlDriScreenInit (II) fglrx(0): swlDriScreenInit for fglrx driver ukiDynamicMajor: found major device number 251 ukiDynamicMajor: found major device number 251 ukiDynamicMajor: found major device number 251 ukiOpenByBusid: Searching for BusID PCI:1:0:0 ukiOpenDevice: node name is /dev/ati/card0 ukiOpenDevice: open result is 17, (OK) ukiOpenByBusid: ukiOpenMinor returns 17 ukiOpenByBusid: ukiGetBusid reports PCI:2:0:0 ukiOpenDevice: node name is /dev/ati/card1 ukiOpenDevice: open result is 17, (OK) ukiOpenByBusid: ukiOpenMinor returns 17 ukiOpenByBusid: ukiGetBusid reports PCI:1:0:0 (II) fglrx(0): [uki] DRM interface version 1.0 (II) fglrx(0): [uki] created "fglrx" driver at busid "PCI:1:0:0" (II) fglrx(0): [uki] added 8192 byte SAREA at 0x2000 (II) fglrx(0): [uki] mapped SAREA 0x2000 to 0xb6996000 (II) fglrx(0): [uki] framebuffer handle = 0x3000 (II) fglrx(0): [uki] added 1 reserved context for kernel (II) fglrx(0): swlDriScreenInit done (II) fglrx(0): Kernel Module Version Information: (II) fglrx(0): Name: fglrx (II) fglrx(0): Version: 8.72.11 (II) fglrx(0): Date: Apr 8 2010 (II) fglrx(0): Desc: ATI FireGL DRM kernel module (II) fglrx(0): Kernel Module version matches driver. (II) fglrx(0): Kernel Module Build Time Information: (II) fglrx(0): Build-Kernel UTS_RELEASE: 2.6.32-22-generic-pae (II) fglrx(0): Build-Kernel MODVERSIONS: yes (II) fglrx(0): Build-Kernel __SMP__: yes (II) fglrx(0): Build-Kernel PAGE_SIZE: 0x1000 (II) fglrx(0): [uki] register handle = 0x00004000 (II) fglrx(0): DRI initialization successfull! (II) fglrx(0): FBADPhys: 0xf00000000 FBMappedSize: 0x01068000 (II) fglrx(0): FBMM initialized for area (0,0)-(1920,2240) (II) fglrx(0): FBMM auto alloc for area (0,0)-(1920,1920) (front color buffer - assumption) (II) fglrx(0): Largest offscreen area available: 1920 x 320 (==) fglrx(0): Backing store disabled (II) Loading extension FGLRXEXTENSION (==) fglrx(0): DPMS enabled (II) fglrx(0): Initialized in-driver Xinerama extension (**) fglrx(0): Textured Video is enabled. (II) LoadModule: "glesx" (II) Loading /usr/lib/xorg/extra-modules/modules/glesx.so (II) Module glesx: vendor="X.Org Foundation" compiled for 1.7.1, module version = 1.0.0 (II) Loading extension GLESX (II) Loading sub module "xaa" (II) LoadModule: "xaa" (II) Loading /usr/lib/xorg/modules/libxaa.so (II) Module xaa: vendor="X.Org Foundation" compiled for 1.7.6, module version = 1.2.1 ABI class: X.Org Video Driver, version 6.0 (II) fglrx(0): GLESX enableFlags = 94 (II) fglrx(0): Using XFree86 Acceleration Architecture (XAA) Screen to screen bit blits Solid filled rectangles Solid Horizontal and Vertical Lines Driver provided ScreenToScreenBitBlt replacement Driver provided FillSolidRects replacement (II) fglrx(0): GLESX is enabled (II) LoadModule: "amdxmm" (II) Loading /usr/lib/xorg/extra-modules/modules/amdxmm.so (II) Module amdxmm: vendor="X.Org Foundation" compiled for 1.7.1, module version = 1.0.0 (II) Loading extension AMDXVOPL (II) fglrx(0): UVD2 feature is available (II) fglrx(0): Enable composite support successfully (II) fglrx(0): X context handle = 0x1 (II) fglrx(0): [DRI] installation complete (==) fglrx(0): Silken mouse enabled (==) fglrx(0): Using HW cursor of display infrastructure! (II) fglrx(0): Disabling in-server RandR and enabling in-driver RandR 1.2. (--) RandR disabled (II) Found 2 VGA devices: arbiter wrapping enabled (II) Initializing built-in extension Generic Event Extension (II) Initializing built-in extension SHAPE (II) Initializing built-in extension MIT-SHM (II) Initializing built-in extension XInputExtension (II) Initializing built-in extension XTEST (II) Initializing built-in extension BIG-REQUESTS (II) Initializing built-in extension SYNC (II) Initializing built-in extension XKEYBOARD (II) Initializing built-in extension XC-MISC (II) Initializing built-in extension SECURITY (II) Initializing built-in extension XINERAMA (II) Initializing built-in extension XFIXES (II) Initializing built-in extension RENDER (II) Initializing built-in extension RANDR (II) Initializing built-in extension COMPOSITE (II) Initializing built-in extension DAMAGE ukiDynamicMajor: found major device number 251 ukiDynamicMajor: found major device number 251 ukiOpenByBusid: Searching for BusID PCI:1:0:0 ukiOpenDevice: node name is /dev/ati/card0 ukiOpenDevice: open result is 18, (OK) ukiOpenByBusid: ukiOpenMinor returns 18 ukiOpenByBusid: ukiGetBusid reports PCI:2:0:0 ukiOpenDevice: node name is /dev/ati/card1 ukiOpenDevice: open result is 18, (OK) ukiOpenByBusid: ukiOpenMinor returns 18 ukiOpenByBusid: ukiGetBusid reports PCI:1:0:0 (II) AIGLX: Loaded and initialized /usr/lib/dri/fglrx_dri.so (II) GLX: Initialized DRI GL provider for screen 0 (II) fglrx(0): Enable the clock gating! (II) fglrx(0): Setting screen physical size to 507 x 285 (II) XKB: reuse xkmfile /var/lib/xkb/server-B20D7FC79C7F597315E3E501AEF10E0D866E8E92.xkm (II) config/udev: Adding input device Power Button (/dev/input/event1) (**) Power Button: Applying InputClass "evdev keyboard catchall" (II) LoadModule: "evdev" (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so (II) Module evdev: vendor="X.Org Foundation" compiled for 1.7.6, module version = 2.3.2 Module class: X.Org XInput Driver ABI class: X.Org XInput driver, version 7.0 (**) Power Button: always reports core events (**) Power Button: Device: "/dev/input/event1" (II) Power Button: Found keys (II) Power Button: Configuring as keyboard (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD) (**) Option "xkb_rules" "evdev" (**) Option "xkb_model" "pc105" (**) Option "xkb_layout" "us" (II) config/udev: Adding input device Power Button (/dev/input/event0) (**) Power Button: Applying InputClass "evdev keyboard catchall" (**) Power Button: always reports core events (**) Power Button: Device: "/dev/input/event0" (II) Power Button: Found keys (II) Power Button: Configuring as keyboard (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD) (**) Option "xkb_rules" "evdev" (**) Option "xkb_model" "pc105" (**) Option "xkb_layout" "us" (II) config/udev: Adding input device Logitech USB-PS/2 Optical Mouse (/dev/input/event3) (**) Logitech USB-PS/2 Optical Mouse: Applying InputClass "evdev pointer catchall" (**) Logitech USB-PS/2 Optical Mouse: always reports core events (**) Logitech USB-PS/2 Optical Mouse: Device: "/dev/input/event3" (II) Logitech USB-PS/2 Optical Mouse: Found 12 mouse buttons (II) Logitech USB-PS/2 Optical Mouse: Found scroll wheel(s) (II) Logitech USB-PS/2 Optical Mouse: Found relative axes (II) Logitech USB-PS/2 Optical Mouse: Found x and y relative axes (II) Logitech USB-PS/2 Optical Mouse: Configuring as mouse (**) Logitech USB-PS/2 Optical Mouse: YAxisMapping: buttons 4 and 5 (**) Logitech USB-PS/2 Optical Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200 (II) XINPUT: Adding extended input device "Logitech USB-PS/2 Optical Mouse" (type: MOUSE) (II) Logitech USB-PS/2 Optical Mouse: initialized for relative axes. (II) config/udev: Adding input device Logitech USB-PS/2 Optical Mouse (/dev/input/mouse1) (II) No input driver/identifier specified (ignoring) (II) config/udev: Adding input device Logitech USB Multimedia Keyboard (/dev/input/event4) (**) Logitech USB Multimedia Keyboard: Applying InputClass "evdev keyboard catchall" (**) Logitech USB Multimedia Keyboard: always reports core events (**) Logitech USB Multimedia Keyboard: Device: "/dev/input/event4" (II) Logitech USB Multimedia Keyboard: Found keys (II) Logitech USB Multimedia Keyboard: Configuring as keyboard (II) XINPUT: Adding extended input device "Logitech USB Multimedia Keyboard" (type: KEYBOARD) (**) Option "xkb_rules" "evdev" (**) Option "xkb_model" "pc105" (**) Option "xkb_layout" "us" (II) config/udev: Adding input device Logitech USB Multimedia Keyboard (/dev/input/event5) (**) Logitech USB Multimedia Keyboard: Applying InputClass "evdev keyboard catchall" (**) Logitech USB Multimedia Keyboard: always reports core events (**) Logitech USB Multimedia Keyboard: Device: "/dev/input/event5" (II) Logitech USB Multimedia Keyboard: Found keys (II) Logitech USB Multimedia Keyboard: Configuring as keyboard (II) XINPUT: Adding extended input device "Logitech USB Multimedia Keyboard" (type: KEYBOARD) (**) Option "xkb_rules" "evdev" (**) Option "xkb_model" "pc105" (**) Option "xkb_layout" "us" (II) config/udev: Adding input device KEYBOARD (/dev/input/event6) (**) KEYBOARD: Applying InputClass "evdev keyboard catchall" (**) KEYBOARD: always reports core events (**) KEYBOARD: Device: "/dev/input/event6" (II) KEYBOARD: Found keys (II) KEYBOARD: Configuring as keyboard (II) XINPUT: Adding extended input device "KEYBOARD" (type: KEYBOARD) (**) Option "xkb_rules" "evdev" (**) Option "xkb_model" "pc105" (**) Option "xkb_layout" "us" (II) config/udev: Adding input device KEYBOARD (/dev/input/event7) (**) KEYBOARD: Applying InputClass "evdev keyboard catchall" (**) KEYBOARD: always reports core events (**) KEYBOARD: Device: "/dev/input/event7" (II) KEYBOARD: Found 14 mouse buttons (II) KEYBOARD: Found scroll wheel(s) (II) KEYBOARD: Found relative axes (II) KEYBOARD: Found keys (II) KEYBOARD: Configuring as mouse (II) KEYBOARD: Configuring as keyboard (**) KEYBOARD: YAxisMapping: buttons 4 and 5 (**) KEYBOARD: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200 (II) XINPUT: Adding extended input device "KEYBOARD" (type: KEYBOARD) (**) Option "xkb_rules" "evdev" (**) Option "xkb_model" "pc105" (**) Option "xkb_layout" "us" (EE) KEYBOARD: failed to initialize for relative axes. (II) config/udev: Adding input device KEYBOARD (/dev/input/mouse2) (II) No input driver/identifier specified (ignoring) (II) config/udev: Adding input device Macintosh mouse button emulation (/dev/input/event2) (**) Macintosh mouse button emulation: Applying InputClass "evdev pointer catchall" (**) Macintosh mouse button emulation: always reports core events (**) Macintosh mouse button emulation: Device: "/dev/input/event2" (II) Macintosh mouse button emulation: Found 3 mouse buttons (II) Macintosh mouse button emulation: Found relative axes (II) Macintosh mouse button emulation: Found x and y relative axes (II) Macintosh mouse button emulation: Configuring as mouse (**) Macintosh mouse button emulation: YAxisMapping: buttons 4 and 5 (**) Macintosh mouse button emulation: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200 (II) XINPUT: Adding extended input device "Macintosh mouse button emulation" (type: MOUSE) (II) Macintosh mouse button emulation: initialized for relative axes. (II) config/udev: Adding input device Macintosh mouse button emulation (/dev/input/mouse0) (II) No input driver/identifier specified (ignoring) (II) fglrx(0): Restoring Recent Mode via PCS is not supported in RANDR 1.2 capable environments

  Read the article

• How to use Active Directory's homeDirectory attribute for Samba?

  - by Shiroi98

  I currently have a Samba share setup where I would like to share Unix folders with Windows users, with Active directory as the backend. I see that there is an attribute called homeDirectory in Active Directory, but no matter what I set, Samba refuses to use that attribute (verified by doing "getent passwd") Additionally, I tried the template homedir = /home/%u in /etc/samba/smb.conf, but the problem is, some users have /home_abc/[username] while others have /home_def/[username]. That sets ALL users to /home/[username]. If I don't use the template homedir, by default it is set to /home/[DOMAIN]/[username]. Bottomline: How can I use Active directory's homeDirectory attribute to set users Home Directory in Unix/Samba? Any help greatly appreciated! :)

  Read the article

• Can't perform ODBC connection to MySQL server on local network

  - by Emmanuel

  I have a wamp server running on LAN ip address 192.168.1.101 . From the browser on my PC which is on the LAN I can access the webserver and have as well set the phpmyadmin.conf file to be able to access the phpmyadmin interface. This works smoothly. On the wamp server I have a database which I'd need to access from any PC on the LAN using the MySQL Connector/ODBC. The problem is that I do not manage to setup the connection correctly. Here are the paramenters I use: Data Source Name: test_connection Description: test conenction Server: 192.168.1.101 Port: 3306 User: root Password: Database: The error message I get is the following: Connection Failed: [HY000][MySQL][ODBC 5.1 Driver]Can's connect to MySql server on '192.168.1.101' (10060) Would anybody have a hint to set up correctly the connection?

  Read the article

• Fedora14 serial console how-to needed

  - by lamba2

  Has anyone ever got a serial console working in fedora 14 ? Is it as simple as adding to grub: serial --unit=0 --speed=38400 terminal --timeout=10 serial console and add to the kernel lines: console=tty0 console=ttyS0,38400 ??? If so, this isn't working for me. I have agetty installed, and im using minicom, although i've heard you can also use "screen /dev/ttyUSB0" on the client side. The /etc/init/serial.conf file suggests it should be working, but nothing. Currently getting no joy from any of this after 2 days. Does anyone know a method that definitely works on fedora 14 ? (no /etc/event.d/ needed or such) edit: Client side im using a null modem cable and usb-serial adaptor.

  Read the article

• Getting VSFTP running on Fedora 14

  - by Louis W

  Having troubles getting VSFTPD running on Fedora 14. Here is what I have done so far, please let me know if I am missing something. When I try to connect through FTP it says connection time out. Installed VSFTP with yum yum install vsftpd Edited config file vi /etc/vsftpd/vsftpd.conf Started service and made sure it would always start up service vsftpd start chkconfig vsftpd on Added and configured a new user /usr/sbin/useradd upload /usr/bin/passwd upload usermod -c "This user cannot login to a shell" -s /sbin/nologin upload Added firewall rules iptables -A INPUT -p tcp --dport 21 -j ACCEPT iptables -A OUTPUT -p tcp --sport 20 -j ACCEPT service iptables save service iptables restart Checked netstat (In reply to comment below) tcp 0 0 0.0.0.0:21 0.0.0.0:* LISTEN 23752/vsftpd

  Read the article

• Priorize /server-status front another .htaccess rewrite rules in apache2

  - by Wiliam

  It's possible to priorize /server-status front another rewrite rules? For example the next ones don't let the /server-status works: RewriteEngine On RewriteCond %{REQUEST_FILENAME} !-s RewriteCond %{REQUEST_FILENAME} !-l RewriteCond %{REQUEST_FILENAME} !-d RewriteCond %{REQUEST_URI} !\. RewriteRule ^.*$ index.php [NC,L] I have to add this to the .htaccess to don't enter to the php project: RewriteRule ^server-status$ - [L] With mod_pagespeed of google, their statistics page works without adding them to the project .htaccess: /mod_pagespeed_statistics https://developers.google.com/speed/docs/mod_pagespeed/configuration My mod_status.conf: <IfModule mod_status.c> <Location /server-status> SetHandler server-status Order Deny,Allow Deny from all Allow from 127.0.0.1 # My allowed ips here </Location> </IfModule>

  Read the article

• Apache is running but there is no page displayed

  - by Michael Ozeryansky

  I am on a Mac OSX and I am using the built in PHP and Apache2. I have been setting up MySQL and finally when I got MySQL working my local site won't display. Do note that I did have the web server running and delivering PHP enabled pages, just no database connection. But my question is not about MySQL. I have changed various settings in the 'http.conf' file, and I have the line: '127.0.0.1 localhost' in my hosts file. I also have other alias' pointing to 127.0.0.1. I have checked everything I could about Apache and I have made sure that any message in the error_log is ok. I currently have my errorLevel set to debug, so I get all the messages. At this point (HOURS of self fixing) I think I need help. What can I provide for someone to figure this out with me. Thanks.

  Read the article

• Apache server in raspberry PI not visible from outside( public IP)

  - by Kronos

  I have made a fresh install of Arch Linux ARM into a Raspberry PI and I mounted there a LAMP, all fresh. I have another Arch(x86) in my laptop with Apache also there, and as far as I know, two web servers cannot run in the same network segment so, the problem is as follows. I my laptop, having Apache running, if I enter via the public ip of my network everything turns ok and I can see my website but, (obviously turning this server down) if I enter from the public IP with the Apache running in the raspberry pi( yes, only that Apache running) i cannot see my website in there. Also, if I access via local network it is a normal success, I can see my website. So, I can enter my raspberry website only via local but in my other web server i can enter it via local and public. I have the same conf files in both of them so what is the difference? I was planning in making the rpi as a development server. Thanks in advance

  Read the article

• Dovecot Virtual Users and Users Domain Mapping

  - by Stojko

  I have successfully compiled, configured and ran Dovecot with virtual users feature. Here's part of my /etc/dovecot.conf configuration file: mail_location = maildir:/home/%d/%n/Maildir auth default { mechanisms = plain login userdb passwd-file { args = /home/%d/etc/passwd } passdb passwd-file { args = /home/%d/etc/shadow } socket listen { master { path = /var/run/dovecot/auth-worker mode = 0600 } } } I faced one issue I can't resolve myself. Is there anyway to create users' domains mapping and provide username in mail_location? Examples: 1. currently I have /home/domain.com/user/Maildir 2. I'd like to have /home/USER/domain.com/user/Maildir Can I achieve this somehow? Greets, Stojko

  Read the article

• Apache2 alias in virtual host

  - by 0x7c00

  I have multiple virtual host in one server and plan to has some alias setup in one virtualhost. So I add the Alias /foo/ /path/to/foo/ in virtualhost directive,but it has no effect. request of host1/foo/ will return 404. But if I add this to /etc/apache2/mods-available/alias.conf, it works. But the problem is host2 will also share this alias. Is there a way to make the alias work only for host1? B.T.W, I use apache2ctl -l, there's no mod_alias.c listed, weird.

  Read the article

• network configuration busted good

  - by jldupont

  On my Linux Ubuntu Karmic machine, when I try to net conf list I get: [2010/03/14 21:25:18, 0] registry/reg_init_basic.c:32(registry_init_common) Failed to initialize the registry: WERR_ACCESS_DENIED I think I may have busted my networking configuration good this time... I can't get Nautilus "networking" functions to work i.e. the "Places - Network" won't show my Windows workgroup anymore... Please help! note1: I have verified my SAMBA configuration and it isn't the problem. note2: I have uninstalled Winbind, Dnsmasq and Squid to get my configuration as simple as possible to debug.

  Read the article

• Windows 7 Stopped Using hosts file for DNS Resolution

  - by AJ

  I am running Windows 7 Home Premium 64-bit. Starting today, I noticed that DNS resolution is not reading my %SYSTEMROOT%\System32\drivers\etc\hosts file. I say this because I added two new entries to the file and when I run 'nslookup' on the command line, they don't resolve. Further, just trying to resolve 'localhost' results in my primary DNS server being queried. I've read several threads that suggest that the file might have been corrupted and to move it aside and create a new one. I've done that, and no improvement. Is there some sort of registry key that controls the sequence of resources used for DNS resolution (similar to nsswitch.conf on UNIX)? What else could be causing this? Thanks in advance.

  Read the article

< Previous Page | 113 114 115 116 117 118 119 120 121 122 123 124  | Next Page >