Search Results

Search found 13936 results on 558 pages for 'safe mode'.

Page 117/558 | < Previous Page | 113 114 115 116 117 118 119 120 121 122 123 124  | Next Page >

  • What is the safest and least expensive way to store 10 terabytes of data?

    - by Josh T
    I'm a member of a production company and we're preparing for our first feature film. We've been discussing methods of data storage to keep all of our original content safe (for as long as possible). While we understand data is never 100% safe, we'd like to find the safest solution for us. We've considered: 16TB NAS for on-site storage 4-5 2TB hard drives (cheap, but not redundant), copy original footage to drives then seal in static free bag Burn data to Blu-Ray disks (time consuming and expensive: 200 disks == $5000) Tape drive(s)? I know the least about tape drives, except the fact that they're more reliable than disks. Any experience/knowledge with this amount of data is hugely appreciated.

    Read the article

  • Adaptec 5805 not recognized after reboot

    - by Rakedko ShotGuns
    After rebooting the system, the controller is not recognized. It only works if the computer is shut down and turned off. I have recently updated the firmware to "Adaptec RAID 5805 Firmware Build 18948". How do I fix the problem? Configuration summary --------------------------- 1. Server name.....................raid_test Adaptec Storage Manager agent...7.31.00 (18856) Adaptec Storage Manager console.7.31.00 (18856) Number of controllers...........1 Operating system................Windows Configuration information for controller 1 ------------------------------------------------------- Type............................Controller Model...........................Adaptec 5805 Controller number...............1 Physical slot...................2 Installed memory size...........512 MB Serial number...................8C4510C6C9E Boot ROM........................5.2-0 (18948) Firmware........................5.2-0 (18948) Device driver...................5.2-0 (16119) Controller status...............Optimal Battery status..................Charging Battery temperature.............Normal Battery charge amount (%).......37 Estimated charge remaining......0 days, 16 hours, 12 minutes Background consistency check....Disabled Copy back.......................Disabled Controller temperature..........Normal (40C / 104F) Default logical drive task priority High Performance mode................Dynamic Number of logical devices.......1 Number of hot-spare drives......0 Number of ready drives..........0 Number of drive(s) assigned to MaxCache cache0 Maximum drives allowed for MaxCache cache8 MaxCache Read Cache Pool Size...0 GB NCQ status......................Enabled Stay awake status...............Disabled Internal drive spinup limit.....0 External drive spinup limit.....0 Phy 0...........................No device attached Phy 1...........................No device attached Phy 2...........................No device attached Phy 3...........................1.50 Gb/s Phy 4...........................No device attached Phy 5...........................No device attached Phy 6...........................No device attached Phy 7...........................No device attached Statistics version..............2.0 SSD Cache size..................0 Pages on fetch list.............0 Fetch list candidates...........0 Candidate replacements..........0 69319...........................31293 Logical device..................0 Logical device name............. RAID level......................Simple volume Data space......................148,916 GB Date created....................09/19/2012 Interface type..................Serial ATA State...........................Optimal Read-cache mode.................Enabled Preferred MaxCache read cache settingEnabled Actual MaxCache read cache setting Disabled Write-cache mode................Enabled (write-back) Write-cache setting.............Enabled (write-back) Partitioned.....................Yes Protected by hot spare..........No Bootable........................Yes Bad stripes.....................No Power Status....................Disabled Power State.....................Active Reduce RPM timer................Never Power off timer.................Never Verify timer....................Never Segment 0.......................Present: controller 1, connector 0, device 0, S/N 9RX3KZMT Overall host IOs................99075 Overall MB......................4411203 DRAM cache hits.................71929 SSD cache hits..................0 Uncached IOs....................29239 Overall disk failures...........0 DRAM cache full hits............71929 DRAM cache fetch / flush wait...0 DRAM cache hybrid reads.........3476 DRAM cache flushes..............-- Read hits.......................0 Write hits......................0 Valid Pages.....................0 Updates on writes...............0 Invalidations by large writes...0 Invalidations by R/W balance....0 Invalidations by replacement....0 Invalidations by other..........0 Page Fetches....................0 0...............................0 73..............................10822 8...............................3 46138...........................4916 27184...........................15226 20875...........................323 16982...........................1771 1563............................5317 1948............................2969 Serial attached SCSI ----------------------- Type............................Disk drive Vendor..........................Unknown Model...........................ST3160815AS Serial Number...................9RX3KZMT Firmware level..................3.AAD Reported channel................0 Reported SCSI device ID.........0 Interface type..................Serial ATA Size............................149,05 GB Negotiated transfer speed.......1.50 Gb/s State...........................Optimal S.M.A.R.T. error................No Write-cache mode................Write back Hardware errors.................0 Medium errors...................0 Parity errors...................0 Link failures...................0 Aborted commands................0 S.M.A.R.T. warnings.............0 Solid-state disk (non-spinning).false MaxCache cache capable..........false MaxCache cache assigned.........false NCQ status......................Enabled Phy 0...........................1.50 Gb/s Power State.....................Full rpm Supported power states..........Full rpm, Powered off 0x01............................113 0x03............................98 0x04............................99 0x05............................100 0x07............................83 0x09............................75 0x0A............................100 0x0C............................99 0xBB............................100 0xBD............................100 0xBE............................61 0xC2............................39 0xC3............................69 0xC5............................100 0xC6............................100 0xC7............................200 0xC8............................100 0xCA............................100 Aborted commands................0 Link failures...................0 Medium errors...................0 Parity errors...................0 Hardware errors.................0 SMART errors....................0 End of the configuration information for controller 1

    Read the article

  • Windows XP not able to boot after loading isapnp.sys driver

    - by pragadheesh
    Hi When i power on my DELL Latitude E6400 laptop running on Windows XP SP3, i get a black screen and hangs after that. So I tried to boot through safe mode which hangs after loading the driver isapnp.sys. Doing a bit of googling i found out Windows XP not booting up including safe mode So I loaded my XP boot cd and tried Recovery Console. In the Recovery console, doing "dir" gives the error "an error occurred during directory enumeration". Then i tried chkdsk /p /r which gave "the volume appears to contain one or more unrecoverable problems" How can i fix these please. Thanks in advance.

    Read the article

  • ls, rm, cd commands not working in SUSE LINUX

    - by Jak
    Hi All, Iam newbi to SUSE, I installed java in my SUSE linux Server edition, So i want to set the path in linux,So i created .bash_profile in in /root path using touch and added the path as "JAVA_PATH". When restart my linux the above command is not working and it show unknown command "JAVA_PATH", I can't able to boot in GUI mode, I can boot only in terminal mode, How to delete the file (.bash_profile in /root) ? And how to add java path in SUSE Note: Before all the commands are working fine Thanks in Advance, Jak...

    Read the article

  • What would cause intermittent DomainKey-Status: failures?

    - by wherestheph
    Every week, we send something like a small newsletter. Sometimes, the header in the newsletter says DomainKey-Status: bad (test mode) Sometimes it says DomainKey-Status: good (test mode) All the other headers in the email are the same (besides expected time and message id differences). None of the email server configuration has changed. What would cause this problem?

    Read the article

  • Can you plug-in the battery while laptop is on AC only?

    - by Ivan Petrushev
    Hello, I'm using my laptop at home with battery removed and only connected to the AC power. However I'm lacking the mobility as my power cord is kinda short. Is it safe from electrical point of view to plug in the battery while the laptop is connected to AC and disconnect the AC power afterwards? What about the opposite side of the question - is it safe (or what the damage could be) if you work on battery, plug in the AC and unplug the battery? If there are differents for different models of laptops, I'm asking about IBM Lenovo T60. Is there such thing as a 'hot-plug battery'?

    Read the article

  • WinXP password messed up after reset

    - by Mark Flint
    I changed my winXP logon password - but could not get in. Obviously I made the some mistake twice... caps lock or something but couldn't get the password. So I booted into safe mode, when into Users and changed the password. Now I when I restart I can get in at logon with my new password, but the standard screensaver - which used to be the same as my user logon - now is something different. I think it's still the previous one which I couldn't get right. Now when I go into Users (not in safe mode) and try and change the password I can't. It won't accept my new user logon which works fine when logging on. I think this too is still the previous one which I couldn't get right. How can I definitely reset the password so it works at logon, in the control panel/users, and the screensaver?

    Read the article

  • Looking for Ubuntu 10.10 driver for GeForce GT 425M GPU.

    - by Fantomas
    It came with my Sony VAIO® VPCF133FX/H 16.4" Notebook. Ubuntu does suggest an NVIDIA driver for me, but when I install it, I cannot boot back in normally. I have to boot into a failsafe mode, then reset graphics setting to default, and reboot again. Right now I am stuck in 800 x 600 mode, but I would like to do better, and take advantage of my 1GB graphics memory :(. Please let me know if you have questions.

    Read the article

  • Installing IIS on MS Windows Server 2003

    - by Vafello
    I have a Windows Server 2003 and asp.net website running on localhost. I have to install php and mysql, but php installation doesn't work for whatever reason. I was wondering if I could install package such as xampp on windows server to save time and hassle installing in manually (I could not find a tutorial for this). I was wondering though, if it is safe, i.e. what will happen if I go to http://localhost/ - will I get the php or asp website? In general, is it safe to install xampp on windows server 2003? All advice greatly appreciated

    Read the article

  • How must I deal with anti-virus software on Windows 7

    - by Heather
    I know this question is looking like an easy question or not a question at all but it's not really easy question. I'm not related to security and anti-viruses and just don't trust every provided anti-virus. So first question is a real question - Is it OK (safe) to not use anti-virus at all. I know how to use firewall, usually I use only trusted connections and surfing trusted sites. My chances to get virus is really low. Even I've got a bit outdated PC and don't want to pay the performance for it. I can do monthly scans without having one installed - is it OK to be safe ? If not can you recommend a good free antivirus solution?

    Read the article

  • attach two hdds to a computer having 500W smps

    - by Gaurav Sharma
    I have a desktop system installed with a 250 GB hdd (seagate sata II) this system is having a power supply of 500W (not sure if it is 650W but not more than that) the power supply is a local brand. Will it be safe to attach a second 250 GB sata II hdd on the same system. Safe in the sense that the system may not fall short of power at any time. My system's config is as follows Core2Duo processor Mercury cabinet having an additional fan (small one) sata dvd writer 52X windows xp sp 2 ASUS motherboard (intel G965 express chipset) If the above specified power supply is not sufficient for above configuration of system then please suggest the appropriate power supply (including watts)

    Read the article

  • How did what appears to be a virus get on my computer? (explanation of situation enclosed)

    - by Massimo
    My system is Windows XP SP3, updated with the latest patches. The PC is connected to a Cisco 877 ADSL router, which does NAT from the internal network to its single static public IP address. There are no forwarded ports, and the router's management console can only be accessed from the inside. I was doing two things: working on a remote office machine via VPN and browsing some web pages on the Cisco web site. The remote network is absolutely safe (it's a lab network, four virtual servers, no publicly accessible services and no users at all; also, none of what I'm going to describe ever happened there). The Cisco web site... well, I suppose is quite safe, too. Suddenly, something happened. Strange popups appears anywhere; programs claiming they're "antimalware", "antispyware" et so on begins autoinstalling; fake Windows Update and Security Center icons pop up in the system tray. svchost.exe began crashing repeatedly. Then, finally, after some minutes of this... BSOD. And, upon rebooting, BSOD again. Even in safe mode. Ok, that was obviously some virus/trojan/whatever. I had to install a new copy of Windows on another partition to clean things up. I found strange executables, services and DLLs almost anywhere. Amongst the other things, user32.dll and ndis.sys had been replaced. A fake software called "Antimalware Doctor" had been installed. There were services with completely random names or even GUIDs (!), and also ones called "IpSect" and "Darkness". There were executable files without an .exe extension. There were even two boot-class drivers, which I'm quite sure are the ones that finally caused the system to crash. A true massacre. Ok, now the questions: What the hell was that?!? It was something more than a simple virus! How did it manage to attack my computer, as I am behind a firewall and was not doing anything even only potentially harmful on the web at the time?

    Read the article

  • SQL 2008 Replication

    - by sevenlamp
    I have replicated two database in SQL2008. The last two days the distribution database from publisher server changed to Suspect Mode and the replication process is down. I read a lot from Google and tried to repair, but without success. During my repairing process, the Distribution Database is has changed to Emergency mode. Can anyone please kindly suggest any solutions?

    Read the article

  • Windows XP Blue-Screens And Reboots Instantly On Boot-Up

    - by ashes999
    My computer was running perfectly until yesterday; my internet suddenly died. Being wireless, I decided to reboot; now the computer doesn't boot. It shows the "Starting Windows" screen (safe mode loads several drivers), then it suddenly blue-screens and immediately reboots (I cannot read the blue-screen contents at all). I've tried safe-mode (with and without networking); no dice. I booted another HD with another XP install and ran scandisk on my HDs; no bad sectors, and even with auto-repair, it didn't fix the problem. Now what? What are my options to fix the broken XP install? I'm thinking: 1) Remove wireless card 2) Run XP install CD and repair installation 3) ???

    Read the article

  • Backup of Xen servers and laptops with encryption

    - by Konrads
    Hello, I have the following backup objects: Multiple Xen Linux instances running on same box. A few laptops Windows that contain also private data that needs to be stored encrypted I have this backup media: A disk attached to the Xen box A disk available remotely for off-site backups I want to do daily-weekly-monthly backups of Xen systems and to back-up laptops in approximately same mode but in push mode (backup initiated by laptop) with encryption. Any good free solutions?

    Read the article

  • Linux compatible touchscreen monitor

    - by jrtokarz
    Can anybody recommend a linux compatible touchscreen monitor, the criteria are: 19inch or greater 1920x1080 or better only single touch required be able to operate in portait mode We currently have some IIyama Prolite MTS2250MS monitors but these do not natively support portait mode and we have had little success getting the touch functionality working in Linux (although they do report themselves as HID devices when plugged in). So an alternative to suggesting a monitor would be pointers to information on how we could get the IIyama monitor working in Linux.

    Read the article

  • Add Machine Key to machine.config in Load Balancing environment to multiple versions of .net framework

    - by davidb
    I have two web servers behind a F5 load balancer. Each web server has identical applications to the other. There was no issue until the config of the load balancer changed from source address persistence to least connections. Now in some applications I receieve this error Server Error in '/' Application. Validation of viewstate MAC failed. If this application is hosted by a Web Farm or cluster, ensure that configuration specifies the same validationKey and validation algorithm. AutoGenerate cannot be used in a cluster. Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code. Exception Details: System.Web.HttpException: Validation of viewstate MAC failed. If this application is hosted by a Web Farm or cluster, ensure that configuration specifies the same validationKey and validation algorithm. AutoGenerate cannot be used in a cluster. Source Error: The source code that generated this unhandled exception can only be shown when compiled in debug mode. To enable this, please follow one of the below steps, then request the URL: Add a "Debug=true" directive at the top of the file that generated the error. Example: or: 2) Add the following section to the configuration file of your application: Note that this second technique will cause all files within a given application to be compiled in debug mode. The first technique will cause only that particular file to be compiled in debug mode. Important: Running applications in debug mode does incur a memory/performance overhead. You should make sure that an application has debugging disabled before deploying into production scenario. How do I add a machine key to the machine.config file? Do I do it at server level in IIS or at website/application level for each site? Does the validation and decryption keys have to be the same across both web servers or are they different? Should they be different for each machine.config version of .net? I cannot find any documentation of this scenario.

    Read the article

  • Toshiba Equium A110-252 laptop won't boot Windows.

    - by Drew Gibson
    I have a Toshiba Equium A110-252 laptop (XP Pro) which stopped booting a couple of weeks ago. The symptoms are that the laptop would display its DOS Toshiba splash screen, then the Windows (XP) boot screen would display, then a very brief blue screen flash, then back to the boot options screen (offering safe mode, safe mode with networking etc, last known good config, etc... none of these work). I assumed a duff HD, and swapped it for a new one and reinstalled from a TrueImage backup. This worked until I installed windows updates I think (the backup was a few months old), and now the PC is doing the same thing. I have installed a third, old HD (60GB) with Ubuntu 11.04 on it, and everything is fine. PC boots and runs Ubuntu beautifully. I need Windows running on it though ! Given these symptoms, could it a windows update issue ? Or might I have a hardware fault still ?

    Read the article

  • seeking VPS Hosting advice

    - by jergw
    What is the best price, best value, for Linux VPS hosting in British Columbia, Canada? looking for something that can handle Perl/PHP, and admin user control of library/module installation. BTW: Is it possible to get a dual setup...half windows mode server, half Linux mode server? Thanks in advance for all your responses.

    Read the article

  • How to remove RAID flag on unstriped drive without losing data?

    - by Alex Folland
    I have a Gigabyte Z68X-UD4-B3 motherboard. It advertises this new thing called "XHD", which is like RAID but makes a SSD and traditional-style drive work together to enable high speed with high capacity. I don't want to use this feature, and I already have Windows 7 64 installed without using this feature. When I first installed my 2 hard drives (1 SSD and 1 traditional-style drive) in my machine and booted it up for the first time, it ran a program from the mobo that asked me if I wanted to set up XHD. Thinking it would go to some config screen, I said yes. It immediately started doing something with my drives and finished. I considered that strange, but figured it wouldn't matter when I simply install Windows onto my SSD only. I now have my BIOS and Windows running in AHCI mode with no RAID arrays and separate drives. My SSD is one of those new Corsair Force GT drives which loses power every so often, causing Windows to BSOD. I've figured everything out about this problem, including installing the latest firmware from Corsair, and the only way to fix it at this point is by installing Intel Rapid Storage Technology to control AHCI instead of Windows, since the Windows AHCI driver disables the drive's power every once in a while and can't be configured not to do so. I've tried installing Intel Rapid Storage Technology. When I reboot my machine after doing so, it BSODs just after the Windows logo. I've figured out this is because my SSD and my traditional drive are flagged as RAID, as seen in the "Intel Matrix Storage Manager" program found by switching the BIOS hard drive handling to "RAID" mode. This is due to the XHD auto-config program I mentioned earlier. Normally, the BIOS is set to AHCI, and when the drives boot in AHCI mode, they work perfectly. So, I've concluded the data is stored in AHCI mode but the drives' flags are set to RAID. I've figured out that I can accomplish my objective by using the "Intel Matrix Storage Manager" program on the mobo (with "Reset disks to non-RAID"), but doing so would cause it to completely wipe the drives I select. I want to simply toggle these flags from RAID to AHCI so Intel Rapid Storage Technology doesn't fail and cause a BSOD upon booting, but without wiping the drives.

    Read the article

  • How to take mysql replication backup

    - by user53864
    I have a MySQL master-master replication setup with a slave for each master(only one master used for read/writes at a time) on Ubuntu server. Wondering what would be the best way to schedule backup of replication databases with mysqldump. I have following clarifications because of which could not proceed further. Scheduling mysqldump backup on masters safe for replication? Connecting masters with GUI applications(workbench) for database manipulations(read, writes.. by developers) is safe? Any inputs are welcome.

    Read the article

  • Can't open Control Panel or IE

    - by Josh
    I have a XP computer where when ever I try to open Control Panel nothing happens, nothing flashes on the screen. Same thing with Internet Explorer. I've scanned the computer with Malwarebytes and Avast, Malwaresbytes found some Adware which it removed without problems. Avast found nothing. I looked at the running processes with Process Explorer, nothing malicious running. And looked at a Process Monitor output when I tried to run IE, nothing obviously wrong. The process just decides to exit. What can I try next? I would suspect corrupt IE install but Control Panel doesn't work either. UPDATE: Nether work in Safe Mode under the user account. (only 1 user on the computer) But in Safe Mode, under the built in Administrator account, they work. So what ever is broken, is only broken in the one account. Anything under the HKCU registry key that could break this?

    Read the article

< Previous Page | 113 114 115 116 117 118 119 120 121 122 123 124  | Next Page >