Search Results

Search found 4316 results on 173 pages for 'disabled'.

Page 118/173 | < Previous Page | 114 115 116 117 118 119 120 121 122 123 124 125  | Next Page >

  • Live CD has black screen HP DV6

    - by Shaun Killingbeck
    Attempting to install/try ubuntu (11.10, 12.04) on my new laptop, using a liveCD (and tried USB). I get the purple screen (with the man/keyboard at the bottom) and after that the screen flashes bright white before going black. Ubuntu continues to load in the background, with login sound etc but the screen is off. I have tried as many different solutions as I could find including: using nomodestep, xforcevesa, i915.modeset=0, and also now i915.modeset=1 in boot options (seperately): varying consequences, but either I end up at a blinking cursor with no prompt, a command line (startx fails: no screen found), or the original blank screen again Tried booting from VirtualBox - it crashes at the same place the screen would go blank when using a CD/USB tried 11.04: I don't have this problem BUT when trying to install, I get a ubi-partman error 141 (possibly down to the three partitions that came on my laptop... not sure why HP needed there own separate partition for HP Tools...) Model: HP Pavillion DV6 6B08SA Processor: AMD Quad-Core A6-3410MX APU with Radeon HD 6545G2 Dual Graphics (1.6 GHZ 4 MB L2 cache ) Chipset: AMD RS880M Any help would be greatly appreciated. I just want to be able to partition the drive and install Ubuntu. I'm assuming the issue is graphics card related, although I have no confirmation of that. Update: Tried the ?orkarounds on https://wiki.ubuntu.com/X/Troubleshooting/BlankScreen - set gfxpayload=text changed nothing, removing splash did nothing and setting vesafb.nonsense=1 did nothing either. I'd like to be able to collect some log information somehow, but I can't get to a command line from the liveCD. tried using the latest 12.04 beta, same issue tried nomodeset without splash or quiet. get the following (tail of) output before it freezes on that screen: * Starting configure network device security [OK] * Starting configure network device [OK] [ 25.720899] ieee80211 phy0: w1_ops_config: change monitor mode: false (implement) [ 25.720923] ieee80211 phy0: w1_ops_config: change power-save mode: false (implement) * Starting restore sound card(s') mixer state(s) [fail] [ 25.721849] ieee80211 phy0: w1_ops_bss_info_changed: qos enabled: false (implement) * Stopping save kernel messages [OK] * Starting bluetooth [OK] * PulseAudio configured for per-user sessions saned disabled; edit /etc/default/saned [ 25.988016] hci_cmd_timer: hci0 command tx timeout [ 26.207225] bad LUN (0:1) [ 26.223735] bad target number (1:0) [ 26.252111] bad target number (2:0) [ 26.272170] bad target number (3:0) [ 26.300154] bad target number (4:0) [ 26.328162] bad target number (5:0) [ 26.344180] bad target number (6:0) [ 26.368142] bad target number (7:0) * Checking battery state... [OK] * Stopping System V runlevel capability [OK] Does this give any indication of the problem? the false (implement) messages also reappear when I press the power button to ask it to shutdown, followed by a [fail] status for killing remaining processes.

    Read the article

  • how this code works and how to modify this code to get my desrire work? [closed]

    - by imon_bayazid
    I dont understand how these code works here : m_MouseHookManager.MouseDoubleClick+=HookManager_MouseDoubleClick; m_MouseHookManager.MouseDoubleClick -= HookManager_MouseDoubleClick; m_KeyboardHookManager.KeyPress +=HookManager_KeyPress; m_KeyboardHookManager.KeyPress -=HookManager_KeyPress; My full Code is here : using System; using System.Windows.Forms; using MouseKeyboardActivityMonitor.WinApi; namespace MouseKeyboardActivityMonitor.Demo { public partial class TestFormHookListeners : Form { private readonly KeyboardHookListener m_KeyboardHookManager; private readonly MouseHookListener m_MouseHookManager; public TestFormHookListeners() { InitializeComponent(); m_KeyboardHookManager = new KeyboardHookListener(new GlobalHooker()); // Hooks are not active after instantiation. You need to use either Enabled property or call Start()()()() method m_KeyboardHookManager.Enabled = true;//True - The Hook is presently installed, activated, and will fire events. m_MouseHookManager = new MouseHookListener(new GlobalHooker()); m_MouseHookManager.Enabled = true; } #region Check boxes to set or remove particular event handlers. private void checkBoxMouseDoubleClick_CheckedChanged(object sender, EventArgs e) { if (checkBoxMouseDoubleClick.Checked) { m_MouseHookManager.MouseDoubleClick += HookManager_MouseDoubleClick; } else { m_MouseHookManager.MouseDoubleClick -= HookManager_MouseDoubleClick; } } private void checkBoxKeyPress_CheckedChanged(object sender, EventArgs e) { if (checkBoxKeyPress.Checked) { m_KeyboardHookManager.KeyPress +=HookManager_KeyPress; } else { m_KeyboardHookManager.KeyPress -=HookManager_KeyPress; } } #endregion #region Event handlers of particular events. They will be activated when an appropriate checkbox is checked. private void HookManager_KeyPress(object sender, KeyPressEventArgs e) { Log(string.Format("KeyPress \t\t {0}\n", e.KeyChar)); } private void HookManager_MouseDoubleClick(object sender, MouseEventArgs e) { Log(string.Format("MouseDoubleClick \t\t {0}\n", e.Button)); } private void Log(string text) { textBoxLog.AppendText(text); textBoxLog.ScrollToCaret(); } #endregion private void checkBoxEnabled_CheckedChanged(object sender, EventArgs e) { m_MouseHookManager.Enabled = checkBoxEnabled.Checked; m_KeyboardHookManager.Enabled = checkBoxEnabled.Checked; } private void radioHooksType_CheckedChanged(object sender, EventArgs e) { Hooker hook; if (radioApplication.Checked) { hook = new AppHooker();//Provides methods for subscription and unsubscription to application mouse and keyboard hooks. } else { hook = new GlobalHooker();//Provides methods for subscription and unsubscription to global mouse and keyboard hooks. } m_KeyboardHookManager.Replace(hook); m_MouseHookManager.Replace(hook);//hook->An AppHooker or GlobalHooker object. //Enables you to switch from application hooks to global hooks //and vice versa on the fly without unsubscribing from events. //Component remains enabled or disabled state after this call as it was before. //Declaration Syntax } private void HookManager_Supress(object sender, MouseEventExtArgs e) { if (e.Button != MouseButtons.Right) { return; } Log("Suppressed.\n"); e.Handled = true; } } } Can anybody help to understand that??? I want by this that whenever a F5 key-pressed my application will be active and then it checks if double-click happen it gives a message .... **How can i modify that.....??????**

    Read the article

  • Dealing with coworkers when developing, need advice [closed]

    - by Yippie-Kai-Yay
    I developed our current project architecture and started developing it on my own (reaching something like, revision 40). We're developing a simple subway routing framework and my design seemed to be done extremely well - several main models, corresponding views, main logic and data structures were modeled "as they should be" and fully separated from rendering, algorithmic part was also implemented apart from the main models and had a minor number of intersection points. I would call that design scalable, customizable, easy-to-implement, interacting mostly based on the "black box interaction" and, well, very nice. Now, what was done: I started some implementations of the corresponding interfaces, ported some convenient libraries and wrote implementation stubs for some application parts. I had the document describing coding style and examples of that coding style usage (my own written code). I forced the usage of more or less modern C++ development techniques, including no-delete code (wrapped via smart pointers) and etc. I documented the purpose of concrete interface implementations and how they should be used. Unit tests (mostly, integration tests, because there wasn't a lot of "actual" code) and a set of mocks for all the core abstractions. I was absent for 12 days. What do we have now (the project was developed by 4 other members of the team): 3 different coding styles all over the project (I guess, two of them agreed to use the same style :), same applies to the naming of our abstractions (e.g CommonPathData.h, SubwaySchemeStructures.h), which are basically headers declaring some data structures. Absolute lack of documentation for the recently implemented parts. What I could recently call a single-purpose-abstraction now handles at least 2 different types of events, has tight coupling with other parts and so on. Half of the used interfaces now contain member variables (sic!). Raw pointer usage almost everywhere. Unit tests disabled, because "(Rev.57) They are unnecessary for this project". ... (that's probably not everything). Commit history shows that my design was interpreted as an overkill and people started combining it with personal bicycles and reimplemented wheels and then had problems integrating code chunks. Now - the project still does only a small amount of what it has to do, we have severe integration problems, I assume some memory leaks. Is there anything possible to do in this case? I do realize that all my efforts didn't have any benefit, but the deadline is pretty soon and we have to do something. Did someone have a similar situation? Basically I thought that a good (well, I did everything that I could) start for the project would probably lead to something nice, however, I understand that I'm wrong. Any advice would be appreciated, sorry for my bad english.

    Read the article

  • Ubuntu 13.04 boot into black screen, even after installing nvidia drivers, fail at: "Starting Reload cups, upon starting avahi-daemon..."

    - by Elad92
    I got a new machine with i7 4770k and gefore gtx660. I installed windows and then installed Ubuntu 13.04. In the installation everything went well, after the installation I again boot from the USB and choose try ubuntu, and installed boot-repair because windows automatically boot with no option for ubuntu. After I repaired the boot, I restarted and got into grub, when I chose Ubuntu I got message saying I'm running on low graphics mode and when I pressed ok the screen turned off. I couldn't do anything so I restarted and after reading this post: My computer boots to a black screen, what options do I have to fix it? I got into recovery, selected dpkg and repaired packages. Then I rebooted, and tried to press 'e' and change quiet splash to no splash and nomodeset but unfortunately both of them didn't work, and not the screen didn't get turned off, but I just saw a blank screen. So I rebooted again, entered the recovery, and this time I went to the root shell, and tried to install nvidia drivers from this guide here: http://www.howopensource.com/2012/10/install-nvidia-geforce-driver-in-ubuntu-12-10-12-04-using-ppa/ I rebooted and got the same black screen again (the screen didn't go off, just saw a blank screen). In the grub I see that the kernel is 3.8.0-25. I also checked that the usb files are not corrupted using the check CD from the ubuntu installation screen. I'm really frustrated, I don't know what else can I do. (If someone also knows how can I connect to wifi using the root shell it will be very appreciated, because when I choose the 'enable networking' it again booting me to a black screen. Thanks Edit After digging more, I again boot with nomodeset and saw where is it failing, this is the lines I saw: * Starting Reload cups, upon starting avahi-daemon to make sure remote queues are populated [OK] * Starting Reload cups, upon starting avahi-daemon to make sure remote queues are populated [fail] I searched for it in google and this is the closest result I got: http://ubuntuforums.org/showthread.php?t=2144261 i didn't find any way to solve it in the internet, from what I understand this is a problem with 13.04. If someone knows how to fix it I will be very grateful. Thanks Edit 2 - 23.6.13 As Mitch suggested, I disabled the avahi-daemon, and when I boot in nomodeset I get the following error: What else can be the problem?

    Read the article

  • Cursor running wild, then crashes on an Asus G73sw

    - by Yarchmon
    The cursor sometimes goes wild, I get random clicks, the windows are resizing, the cursor disappears. In the worst case, clicks and keyboards are disabled. I've tried the solution given on doc.ubuntu-fr.org and add tu grub : i8042.nomux=1 i8042.reset=1 in GRUB_CMDLINE_LINUX_DEFAULT But it didn't work What can I do ? Graphic card : Geforce GTX460M. Ubuntu : 11.10 (64 bits). Laptop Asus G73sw Interface : Unity (since 11.10) - didn't get this problem with Gnome before. Complement: when a window is resizing, it gets drag-boxes at every corner, center of sides and center of the window. It looks like my touchpad sends random info, or like a "ghost" touchscreen. lspci result : 00:00.0 Host bridge: Intel Corporation 2nd Generation Core Processor Family DRAM Controller (rev 09) 00:01.0 PCI bridge: Intel Corporation Xeon E3-1200/2nd Generation Core Processor Family PCI Express Root Port (rev 09) 00:16.0 Communication controller: Intel Corporation 6 Series/C200 Series Chipset Family MEI Controller #1 (rev 04) 00:1a.0 USB Controller: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #2 (rev 05) 00:1b.0 Audio device: Intel Corporation 6 Series/C200 Series Chipset Family High Definition Audio Controller (rev 05) 00:1c.0 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 1 (rev b5) 00:1c.1 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 2 (rev b5) 00:1c.3 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 4 (rev b5) 00:1c.5 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 6 (rev b5) 00:1d.0 USB Controller: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #1 (rev 05) 00:1f.0 ISA bridge: Intel Corporation HM65 Express Chipset Family LPC Controller (rev 05) 00:1f.2 SATA controller: Intel Corporation 6 Series/C200 Series Chipset Family 6 port SATA AHCI Controller (rev 05) 00:1f.3 SMBus: Intel Corporation 6 Series/C200 Series Chipset Family SMBus Controller (rev 05) 01:00.0 VGA compatible controller: nVidia Corporation GF106 [GeForce GTX 460M] (rev a1) 01:00.1 Audio device: nVidia Corporation GF106 High Definition Audio Controller (rev a1) 03:00.0 Network controller: Atheros Communications Inc. AR9285 Wireless Network Adapter (PCI-Express) (rev 01) 04:00.0 USB Controller: Fresco Logic FL1000G USB 3.0 Host Controller (rev 04) 05:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 06) Edit 01-09-12: Tried on Ubuntu 2D: the behavior is different: it's like i'm randomly clicking on the workspace switcher icon. In the worst case, it can happen several times in a minute.

    Read the article

  • WIF, ADFS 2 and WCF&ndash;Part 1: Overview

    - by Your DisplayName here!
    A lot has been written already about passive federation and integration of WIF and ADFS 2 into web apps. The whole active/WS-Trust feature area is much less documented or covered in articles and blogs. Over the next few posts I will try to compile all relevant information about the above topics – but let’s start with an overview. ADFS 2 has a number of endpoints under the /services/trust base address that implement the WS-Trust protocol. They are grouped by the WS-Trust version they support (/13 and /2005), the client credential type (/windows*, /username*, /certificate*) and the security mode (*transport, *mixed and message). You can see the endpoints in the MMC console under the Service/Endpoints page. So in other words, you use one of these endpoints (which exactly depends on your configuration / system setup) to request tokens from ADFS 2. The bindings behind the endpoints are more or less standard WCF bindings, but with SecureConversation (establishSecurityContext) disabled. That means that whenever you need to programmatically talk to these endpoints – you can (easily) create client bindings that are compatible. Another option is to use the special bindings that come with WIF (in the Microsoft.IdentityModel.Protocols.WSTrust.Bindings namespace). They are already pre-configured to be compatible with the ADFS endpoints. The downside of these bindings is, that you can’t use them in configuration. That’s definitely a feature request of mine for the next version of WIF. The next important piece of information is the so called Federation Service Identifier. This is the value that you (at least by default) have to use as a realm/appliesTo whenever you are requesting a token for ADFS (e.g. in  IdP –> RSTS scenario). Or (even more) technically speaking, ADFS 2 checks for this value in the audience URI restriction in SAML tokens. You can get to this value by clicking the “Edit Federation Service Properties” in the MMC when the Service tree-node is selected. OK – I will come back to this basic information in the following posts. Basically I want to go through the following scenarios: ADFS in the IdP role ADFS in the R-STS role (with a chained claims provider) Using the WCF bindings for automatic token issuance Using WSTrustChannelFactory for manual token handling Stay tuned…

    Read the article

  • Using jQuery to Make a Field Read Only in SharePoint

    - by Mark Rackley
    Okay… this will be my shortest blog post EVER. Very little rambling.. I promise, and I’m sure this has been blogged more than once, so I apologize for adding to the noise, but like I always say, I blog for myself so I have a global bookmark. So,let’s say you have a field on a SharePoint Form and you want to make it read only. You COULD just open it up in SPD and easily make it read only, but some people are purists and don’t like use SPD or modify the default new/edit/disp forms. Put me in the latter camp, I try to avoid modifying these forms and it seemed like such a simple task that I didn’t want to create a new un-ghosted form.  So.. how do you do it? It’s only one line of jQuery. All you need to do is find the id for your input field and capture the keypress on it so that it cannot be modified (you should probably capture clicks for dropdowns/checkboxes/etc. but I didn’t need to).  Anyway, here’s the entire script: <script src="jquery.min.js" type="text/javascript"></script> <script type="text/javascript"> jQuery(document).ready(function($){ //capture keypress on our read only field and return false $('#idOfInputField').keypress(function() { return false; }); }) </script>   You can find the ID of your input field by viewing the source, this ID stays consistent as long as you don’t muck with the list or form in the wrong way.  Please note, you CANNOT disable the input field as an alternative to capturing the keypress. If you do this and save the form, any data in the disabled fields will be wiped out. There are probably a dozen ways to make a field read-only and if all you are using jQuery for is to make a field read-only, then you might want to question your use of adding the overhead (although it’s really not that much). Hey.. it’s another tool for your tool belt.

    Read the article

  • Saddling your mountain lion with JDeveloper

    - by Blueberry Coder
    Last October, Apple released Java Update 2012-006. This patch brought the Apple-provided JDK for OS X Lion v10.7 and OS X Mountain Lion v10.8 to version 1.6.0_37. At the same time, it disabled the Apple Java plugins and removed the Java Preferences panel that enabled users to manage the various Java releases on their computer. On the Windows and Linux platforms, JDeveloper 11g R1 has been certified  to run on Java 7 since patch set 5. This is not the case on OS X.   ( The above is not a typo. Apple's OS for personal computer is now known as OS X; the « Mac » prefix has been dropped with the 10.8 release. And it's pronounced « Oh-Ess-Ten », by the way. Yes, I am a nitpicker. I know... ) Please note JDeveloper 11g R2 is not certified either. On any platform. It will generally work, but there are known issues with ADF Mobile. Personally, I would recommend to wait for 12c before going to JDK 7.  Now, suppose you have installed Oracle's JDK 7 on your Mac. JDeveloper will not run on it. It will even not install. Susan and I discovered this the hard way while setting up the ADF Mobile hands-on lab we ran at the UKOUG 2012 conference. The lab was a great success nevertheless, attracting nearly a hundred delegates. It was great to see the interest ADF Mobile already generates, especially among PL/SQL Developers and DBAs. But what did we do to make it work?  While Java Update 2012-006 removed the Java Preferences panel, it leaved in place OS X's command-line Java infrastructure. Thus, it is possible to invoke the Apple JDK 6 to start the JDeveloper installer. Suppose your user is named « Fred », and that the JDeveloper installer is on your desktop. You can execute the following command in a terminal window (on a single line) to start the installer:  /usr/libexec/java_home --version 1.6.0  --exec java -jar /Users/Fred/Desktop/jdevstudio11116install.jar  The JDeveloper installer, being provided a valid JDK reference, will set up the IDE and embedded WebLogic Server instance accordingly. Clever engineering at its finest!

    Read the article

  • Nvidia GT218 repository drivers don't work

    - by user1042840
    I upgraded all packages with sudo apt-get upgrade command on my Ubuntu 10.04 box and I have Ubuntu 12.04 3.2.0-29-generic-pae now. I have two monitors and the following GPU: 01:00.0 VGA compatible controller: NVIDIA Corporation GT218 [NVS 300] (rev a2) After upgrading to 12.04, I somehow lost my previous setup with one common workspace stretched across two monitors. When Ubuntu starts only one monitor is on. I can see the message on the active monitor: Not optimum mode. Recommended mode: 1680x1050 60Hz I used Nvidia proprietary drivers on 10.04 but now jockey-text --list shows: xorg:nvidia_current - NVIDIA accelerated graphics driver (Proprietary, Disabled, Not in use) xorg:nvidia_current_updates - NVIDIA accelerated graphics driver (post-release updates) (Proprietary, Enabled, Not in use) When I run sudo nvidia-settings it says You do not appear to be using the NVIDIA X driver. Please edit your X configuration file (just run `nvidia-xconfig` as root), and restart the X server.' I typed nvidia-xconfig and rebooted, but jockey-text --list says the same after the reboot: Not in use. The same with nvidia-current - Enabled but Not in use. I also tried nvidia-173 but I ended up in tty immediately at startup so I removed it. I used to have some problems with Nvidia proprietary drivers on 10.04, I had to put paths to EDID files in /etc/X11/xorg.conf explicitly, but the resolution was as recommended and both monitors were working. If I understand correctly, nouveau drivers are used now by default because the resolution is still quite high, definitely not 800x600, xrandr showed: xrandr: Failed to get size of gamma for output default Screen 0: minimum 320 x 400, current 1600 x 1200, maximum 1600 x 1200 default connected 1600x1200+0+0 0mm x 0mm 1600x1200 66.0* 1280x1024 76.0 1024x768 76.0 800x600 73.0 640x480 73.0 640x400 0.0 320x400 0.0 1680x1050_60.00 (0x4f) 146.2MHz h: width 1680 start 1784 end 1960 total 2240 skew 0 clock 65.3KHz v: height 1050 start 1053 end 1059 total 1089 clock 60.0Hz However, colors seem a bit faded and blurry with nouveau drivers. Mouse cursor is invisible if it's placed inside Firefox window, and only one monitor is working. I like open source and if it's possible I'd prefer to use nouveau drivers but a few things should be fixed. I'm curious why nvidia-current drivers from the repository don't work now. I read it has something to do with the new X11 server in Ubuntu 12.04, is it true? How can I get it back to work?

    Read the article

  • No wireless connection using a conceptronic c54i (RT2561/RT61 rev B)

    - by jrosell
    Detected but not working. New install on ubuntu 11.10 using coneptronic C54Ri. As documentation says it uses Ralink drivers.... Any ideas why my wireless does not work? $ lspci -nn | grep -i 'ralink' 01:05.0 Network controller: Ralink corp. RT2561/RT61 rev B 802.11g ifconfig eth0 Link encap:Ethernet HWaddr 00:1e:90:e5:af:13 inet addr:192.168.0.197 Bcast:192.168.0.255 Mask:255.255.255.0 inet6 addr: fe80::21e:90ff:fee5:af13/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:28361 errors:0 dropped:0 overruns:0 frame:0 TX packets:16858 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:39812172 (39.8 MB) TX bytes:1633405 (1.6 MB) Interrupt:43 Base address:0xc000 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:80 errors:0 dropped:0 overruns:0 frame:0 TX packets:80 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:6608 (6.6 KB) TX bytes:6608 (6.6 KB) iwconfig wlan0 wlan0 IEEE 802.11abg ESSIDff/any Mode:Managed Access Point: Not-Associated Tx-Power=0 dBm Retry long limit:7 RTS thrff Fragment thrff Power Managementff lsmod | grep rt rt61pci 27493 0 crc_itu_t 12627 1 rt61pci rt2x00pci 14202 1 rt61pci rt2x00lib 48114 2 rt61pci,rt2x00pci mac80211 272785 2 rt2x00pci,rt2x00lib cfg80211 172392 2 rt2x00lib,mac80211 eeprom_93cx6 12653 1 rt61pci parport_pc 32114 1 parport 40930 3 ppdev,parport_pc,lp lsmod | grep rt [ 2497.816989] phy0 -> rt2x00pci_regbusy_read: Error - Indirect register access failed: offset=0x0000308c, value=0xffffffff [ 2497.827112] phy0 -> rt2x00pci_regbusy_read: Error - Indirect register access failed: offset=0x0000308c, value=0xffffffff [ 2497.837430] phy0 -> rt2x00pci_regbusy_read: Error - Indirect register access failed: offset=0x0000308c, value=0xffffffff [ 2497.847528] phy0 -> rt2x00pci_regbusy_read: Error - Indirect register access failed: offset=0x0000308c, value=0xffffffff [ 2497.847632] phy0 -> rt61pci_wait_bbp_ready: Error - BBP register access faile d, aborting. [ 2497.847637] phy0 -> rt61pci_set_device_state: Error - Device failed to enter state 4 (-5). sudo lshw -C network *-network DISABLED description: Wireless interface product: RT2561/RT61 rev B 802.11g vendor: Ralink corp. physical id: 5 bus info: pci@0000:01:05.0 logical name: wlan0 version: 00 serial: fa:b8:14:58:62:35 width: 32 bits clock: 33MHz capabilities: pm cap_list ethernet physical wireless configuration: broadcast=yes driver=rt61pci driverversion=3.0.0-12-generic firmware=0.8 latency=0 link=no multicast=yes wireless=IEEE 802.11abg resources: irq:16 memory:fdef8000-fdefffff iwlist scan lo Interface doesn't support scanning. eth0 Interface doesn't support scanning. wlan0 Failed to read scan data : Network is down uname -mr 3.0.0-12-generic i686 Edit 1 $ rfkill list all 0: phy0: Wireless LAN Soft blocked: no Hard blocked: no On reboot, sudo lshw -C network returns network is ok. Hovever, WPA keeps on asking the wireless key

    Read the article

  • What are these errors when I try to "make" the driver of my wireless network?

    - by Tom Brito
    I got got a wireless to usb adapter, and I'm having some trouble to install the drivers on Ubuntu. First of all, the readme file say to use the "make" command, and I already got errors: $ make make[1]: Entering directory `/usr/src/linux-headers-2.6.35-22-generic' CC [M] /home/wellington/Desktop/rtl8192su_linux_2.4_2.6.0003.0301.2010/HAL/rtl8192u/r8192U_core.o /home/wellington/Desktop/rtl8192su_linux_2.4_2.6.0003.0301.2010/HAL/rtl8192u/r8192U_core.c: In function ‘rtl8192_usb_probe’: /home/wellington/Desktop/rtl8192su_linux_2.4_2.6.0003.0301.2010/HAL/rtl8192u/r8192U_core.c:12325: error: ‘struct net_device’ has no member named ‘open’ /home/wellington/Desktop/rtl8192su_linux_2.4_2.6.0003.0301.2010/HAL/rtl8192u/r8192U_core.c:12326: error: ‘struct net_device’ has no member named ‘stop’ /home/wellington/Desktop/rtl8192su_linux_2.4_2.6.0003.0301.2010/HAL/rtl8192u/r8192U_core.c:12327: error: ‘struct net_device’ has no member named ‘tx_timeout’ /home/wellington/Desktop/rtl8192su_linux_2.4_2.6.0003.0301.2010/HAL/rtl8192u/r8192U_core.c:12328: error: ‘struct net_device’ has no member named ‘do_ioctl’ /home/wellington/Desktop/rtl8192su_linux_2.4_2.6.0003.0301.2010/HAL/rtl8192u/r8192U_core.c:12329: error: ‘struct net_device’ has no member named ‘set_multicast_list’ /home/wellington/Desktop/rtl8192su_linux_2.4_2.6.0003.0301.2010/HAL/rtl8192u/r8192U_core.c:12330: error: ‘struct net_device’ has no member named ‘set_mac_address’ /home/wellington/Desktop/rtl8192su_linux_2.4_2.6.0003.0301.2010/HAL/rtl8192u/r8192U_core.c:12331: error: ‘struct net_device’ has no member named ‘get_stats’ /home/wellington/Desktop/rtl8192su_linux_2.4_2.6.0003.0301.2010/HAL/rtl8192u/r8192U_core.c:12332: error: ‘struct net_device’ has no member named ‘hard_start_xmit’ make[2]: *** [/home/wellington/Desktop/rtl8192su_linux_2.4_2.6.0003.0301.2010/HAL/rtl8192u/r8192U_core.o] Error 1 make[1]: *** [_module_/home/wellington/Desktop/rtl8192su_linux_2.4_2.6.0003.0301.2010/HAL/rtl8192u] Error 2 make[1]: Leaving directory `/usr/src/linux-headers-2.6.35-22-generic' make: *** [all] Error 2 /home/wellington/Desktop/rtl8192su_linux_2.4_2.6.0003.0301.2010/ is the path where I copied the drivers on my computer. Any idea how to solve this? (I don't even know what the error is...) update: sudo lshw -class network *-network description: Ethernet interface product: RTL8111/8168B PCI Express Gigabit Ethernet controller vendor: Realtek Semiconductor Co., Ltd. physical id: 0 bus info: pci@0000:01:00.0 logical name: eth0 version: 03 serial: 78:e3:b5:e7:5f:6e size: 10MB/s capacity: 1GB/s width: 64 bits clock: 33MHz capabilities: pm msi pciexpress msix vpd bus_master cap_list rom ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd 1000bt 1000bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=r8169 driverversion=2.3LK-NAPI duplex=half latency=0 link=no multicast=yes port=MII speed=10MB/s resources: irq:42 ioport:d800(size=256) memory:fbeff000-fbefffff memory:faffc000-faffffff memory:fbec0000-fbedffff *-network DISABLED description: Wireless interface physical id: 2 logical name: wlan0 serial: 00:26:18:a1:ae:64 capabilities: ethernet physical wireless configuration: broadcast=yes multicast=yes wireless=802.11b/g

    Read the article

  • Lenovo W520 back usb port not working

    - by jaudette
    The usb port in the back of my laptop (on the right side when viewed from using perspective) is not working. Does anybody know if we can get this port working, and what the port number is. Here is my lsusb, if it can help. % lsusb Bus 001 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub Bus 002 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub Bus 003 Device 002: ID 046d:c01e Logitech, Inc. MX518 Optical Mouse Bus 003 Device 003: ID 046d:c318 Logitech, Inc. Illuminated Keyboard Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 004 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Bus 001 Device 003: ID 0765:5001 X-Rite, Inc. Huey PRO Colorimeter Bus 001 Device 004: ID 147e:2016 Upek Biometric Touchchip/Touchstrip Fingerprint Sensor Bus 001 Device 005: ID 0a5c:217f Broadcom Corp. Bluetooth Controller Bus 001 Device 006: ID 04f2:b217 Chicony Electronics Co., Ltd Lenovo Integrated Camera (0.3MP) Bus 002 Device 003: ID 17ef:1003 Lenovo Integrated Smart Card Reader I am running 12.10, upgraded from 12.04 but it did not work either in 12.04. The two usb ports on the left work just fine. EDIT: I just updated my bios from 1.32 to 1.39, no change in behaviour. The port does not even power up my devices. EDIT 2: Booted up windows, and the port is working. I went into the device manager and looked at the USB settings. I found my USB drive on Port 2, Hub 3, i just don't know how that relates to the Bus and Device numbers of linux. In windows, Smart card reader was on USB hub located at port 1 hub 2, fingerprint and bluetooth were on USB hub located at port 1 hub 1 EDIT 3: Went and looked at this SO post. Tried to look at my kern.log file with tail -f /var/log/kern.log. Got some activity when plugging/removing devices in other ports, but nothing happens when connecting a device into that port. It really looks disabled. Looked at my usb1-4 sys/bus/usb/devices/usb1/power/control and they are all set on auto. As expected, usb4 have version 3.00, the others (usb1-usb3) are 2.00.

    Read the article

  • New computer hangs on shutdown/reboot, how to troubleshoot?

    - by Torben Gundtofte-Bruun
    My system is working perfectly but it freezes during shutdown/reboot/suspend/hibernate: All windows and the menu bar disappear but the desktop wallpaper remains. It doesn't even show the shutdown screen (the one with the animated dots) where I could hit ESC and watch the shutdown console text. The system is brand-new and fully updated using Update Manager. How can I determine what is causing the freeze? Is there a log I can investigate? How can I fix this? I see no obvious cause of the freeze. The only USB attachment is a mouse/keyboard; I don't have any external storage attached; and I don't have any programs running (the machine freezes even when doing shutdown right from the login screen). What I've tried so far: Based on other questions (this, this, and this) that suggest some ACPI settings, I've tried sudo shutdown -h now to see whether the shutdown console text display offers any hints, but the system doesn't even get that far - it still freezes while the screen shown the desktop background image, without any toolbars. Only sudo shutdown --force works, but that's not a solution. Editing the grub menu to add acpi=off to the kernel didn't help. I guess there's not much point in trying the other (lesser) ACPI suggestions? Adding noapic to the grub entry had no discernible effect. Adding nolapic instead did something (I had removed the quiet option) - the system managed to continue further with the shutdown, right until the line Checking for running unattended-upgrades: which were the last characters on the screen. I've also checked the system BIOS, especially regarding power options, but didn't see anything out of the ordinary. Switching the BIOS standby setting from S3 to S1 didn't help. The standby setting can't be disabled, and there are no other ACPI-related settings AFAIK. BIOS reset didn't help. Not surprised; hadn't changed anything. I tried going to a virtual console (CtrlAltF1) as suggested by djeikyb and from there did a shutdown -h now and it froze there too, after this console output. I didn't try killing processes one at a time because I'm still too newbie to figure out how to do that. Booting with kernel 2.6.35.22 rather than 2.6.35.25 didn't help. Disabling the Nvidia drivers didn't help. Booting from Live CD (USB stick in fact) didn't help; it freezes the same way. Booting from Live CD, with acpi=off noapic nolapic didn't help either. Neither did just nolapic. So evidently this is not some custom setting in my install, but some sort of basic issue. MemTest competed in 1 hour without errors.

    Read the article

  • How to make an object move again after being stopped by collision in Unity?

    - by Matthew Underwood
    I have a player object which position is always centered on the main camera's viewport. This object has a Rigidbody 2D, a box and circle collider. The player moves around a level, the level has a polygon collider attached. I move the camera until the object hits against the collider, which stops the movement of the camera by setting its speed to 0. The problem happens when I want to move the camera / player object away from the collider. As the speed is already at 0, it cannot move away from the collider. The script attached to the player object, checks for collisions and applies the speed to 0 on the main camera's test script. using UnityEngine; using System.Collections; public class move : MonoBehaviour { public float speed; public test testing; // Use this for initialization void Start () { speed = 10F; testing = Camera.main.GetComponent<test>(); } // Update is called once per frame void FixedUpdate () { Vector3 p = Camera.main.ViewportToWorldPoint(new Vector3(0.5F, 0.5F, Camera.main.nearClipPlane)); transform.position = new Vector3(p.x, p.y, -1); } void OnCollisionEnter2D(Collision2D col) { testing.speed = 0; } void OnCollisionExit2D(Collision2D col) { testing.speed = 10F; } } This is the script attached to the main camera; just a simple script that changes the camera's position. using UnityEngine; using System.Collections; public class test : MonoBehaviour { public float speed; public float translationY; public float translationX; // Use this for initialization void Start () { speed = 10F; } void FixedUpdate () { translationY = Input.GetAxis("Vertical") * speed * Time.deltaTime; translationX = Input.GetAxis("Horizontal") * speed * Time.deltaTime; transform.Translate(translationX, translationY, 0); } } The player object isn't kinematic and is a fixed angle, the colliders aren't triggers and the polygon collider isn't a trigger either. The player is the red square, the collider is the pink area. -- EDIT -- From the latest change the collider set up for the player So if the X speed was disabled. It wouldnt move into the side of the polygon colider which is good, but yet you couldnt move away from it. And moving down would move inside the colider.

    Read the article

  • Get AutoHotkey Script To Run As Admin At Startup

    - by deadlydog
    A few weeks back I posted some problems with running AutoHotkey (AHK) in Windows 8, and that the solution was to run your AHK script as admin.  I also showed how to have the script start automatically when you logged into Windows.  What I didn’t realize at the time though was that the method only worked because I had disabled UAC in the registry (which prevents most Metro apps from working in Windows 8, and likely isn’t acceptable for most people). So here is a Windows 8, UAC-friendly method to accomplish the same task (also works in previous versions of Windows).  The trick is to use the Task Scheduler: 1. Open the Task Scheduler (also known as “Schedule tasks” in Windows 8 Settings).   2. Create a new Basic Task. 3. Give it a name and description (something like “launch AutoHotkey script at login”), and then specify to have it run “When I log on”.  Then specify that you want it to “Start a program”, and then point it towards your AutoHotkey script.  Before you finish the wizard, check off “Open the Properties dialog for this task when I click Finish”.   4. When that Properties dialog opens up, go to the Conditions tab and make sure none of the checkboxes under the Power category are checked off; this will ensure the script still launches if you are on a laptop and not plugged into AC power.   5. Now here is the important part; To have your script “Run as admin”, on the General tab check off “Run with highest privileges”. Now your AHK script should start automatically as soon as you log into Windows; even when UAC is enabled   6. If your AHK script uses an #Include statement to include other files, you may get an error similar to this one when your task runs: “#Include file … cannot be opened. The program will exit.” The solution to this is to tell your AHK script to start in the same directory as the file that you want to include.  So you will need to edit your scheduled task’s Action to specify the Start In directory. Happy coding!

    Read the article

  • How to make a queue switches from FIFO mode to priority mode?

    - by enzom83
    I would like to implement a queue capable of operating both in the FIFO mode and in the priority mode. This is a message queue, and the priority is first of all based on the message type: for example, if the messages of A type have higher priority than the messages of the B type, as a consequence all messages of A type are dequeued first, and finally the messages of B type are dequeued. Priority mode: my idea consists of using multiple queues, one for each type of message; in this way, I can manage a priority based on the message type: just take first the messages from the queue at a higher priority and progressively from lower priority queues. FIFO mode: how to handle FIFO mode using multiple queues? In other words, the user does not see multiple queues, but it uses the queue as if it were a single queue, so that the messages leave the queue in the order they arrive when the priority mode is disabled. In order to achieve this second goal I have thought to use a further queue to manage the order of arrival of the types of messages: let me explain better with the following code snippet. int NUMBER_OF_MESSAGE_TYPES = 4; int CAPACITY = 50; Queue[] internalQueues = new Queue[NUMBER_OF_MESSAGE_TYPES]; Queue<int> queueIndexes = new Queue<int>(CAPACITY); void Enqueue(object message) { int index = ... // the destination queue (ie its index) is chosen according to the type of message. internalQueues[index].Enqueue(message); queueIndexes.Enqueue(index); } object Dequeue() { if (fifo_mode_enabled) { // What is the next type that has been enqueued? int index = queueIndexes.Dequeue(); return internalQueues[index].Dequeue(); } if (priority_mode_enabled) { for(int i=0; i < NUMBER_OF_MESSAGE_TYPES; i++) { int currentQueueIndex = i; if (!internalQueues[currentQueueIndex].IsEmpty()) { object result = internalQueues[currentQueueIndex].Dequeue(); // The following statement is fundamental to a subsequent switching // from priority mode to FIFO mode: the messages that have not been // dequeued (since they had lower priority) remain in the order in // which they were queued. queueIndexes.RemoveFirstOccurrence(currentQueueIndex); return result; } } } } What do you think about this idea? Are there better or more simple implementations?

    Read the article

  • WebCenter Content Web Search Performance: Do you really need that folder path info?

    - by Nicolas Montoya
    End-users want content at their fingertips at the speed of thought if possible. When running search operations in the WebCenter Conter Web Interface every second or fraction of a second improvement does matter. When doing some trace analysis on the systemdatabase tracing on a customer environment, we came across some SQL queries that were unnecessarily being triggered! These were related to determining the folder path for every entry part of the search result set. However, this folder path was not even being used as part of the displayed information in the user interface.Why was the folder path information being collected when it was not even displayed in the UI? We found that the configuration parameter 'FolderPathInSearchResults' was set to 'true' under Administration > Admin Server > General Configuration > Additional Configuration Variables as shown below:When executing a quicksearch by keyword we were getting 100 out of 2280 entries in the first page of the result set.When thera 'FolderPathInSearchResults' configuration parameter is set to 'true', the following queries appear in the systemdatabase tracing:100 executions for a query on the FolderFiles table for each of the documents displayed in the first page:>systemdatabase/6       12.13 11:17:48.188      IdcServer-199   1.45 ms. SELECT * FROM FolderFiles WHERE dDocName='SLC02VGVUSORAC140641' AND fLinkRank=0[Executed. Returned row(s): true]382 executions for a query of the folders tables - most of the documents that match the keyword criteria are at a folder depth level of three or four:>systemdatabase/6       12.13 11:17:48.114      IdcServer-199   2.57 ms. SELECT FolderFolders.*,FolderMetaDefaults.* FROM FolderFolders,FolderMetaDefaults WHERE FolderFolders.fFolderGUID=FolderMetaDefaults.fFolderGUID(+) AND((FolderFolders.fFolderGUID = '1EB8E527E19B09ED3FE82EE310AEA13A' ) )[Executed.Returned row(s): true]By setting this 'FolderPathInSearchResults' configuration parameter to 'false', the above queries were no longer reported in the Server Output System Audit Information.Now, let's consider a practical scenario:Search result set page = 100Average folder depth der document in the search result set: 5The number of folder path related queries will be: 100 + 5*500 = 600If each query takes slightly over 3 ms. You would have 2000 ms (2 seconds) spent in server time to get this information.The overall performance impact goes beyond seerver time execution, as this information needs to travel from the server to the browser. If the documents are further nested into the folder hierarchy, additional hundreds of queries may be executed. If folder path is not being displayed in the end-user interface profile, your system may be better of with the 'FolderPathInSearchResults' configuration parameter disabled.

    Read the article

  • Dual booting windows 8/ubuntu 12.04.2, Grub doesn't appear and machine never boot in ubuntu

    - by black sensei
    i got a new ACER predator AG3620-UR308 which came with windows 8, so i wanted to run ubuntu 12.04.2 on it as a dual booting. To be honest, i've been doing dual booting for a while now so, i did the right thing. the box came with 2TB HDD. so i made 4 partitions with a raw partition just after the windows installation partition I always do manual installation so even if ubuntu didn't detect windows 8, it was ok for me. So i created swap area and finished the installation etc....Grub was install on the only drive there which is sda. After reboot, grub doesn't even come up.So it always boot in windows 8. I did repeat the installation process twice and yield same result. which is weird because this method always works for me so far.Even the laptop am using to write this post is a dual booting windows 7/ mint nadia installed the same way. Is there anything new in windows 8 that i didn't make provision for? Before starting the installation, all i read about was that , windows 8 should be installed first and ubuntu after. I went ahead and disable secure boot from the BIOS and enabled CSM (don't even know what it means) according to Acer custhelp site . I boot from USB and did fdisk -l bellow is the result: ubuntu@ubuntu:~$ sudo fdisk -l WARNING: GPT (GUID Partition Table) detected on '/dev/sda'! The util fdisk doesn't support GPT. Use GNU Parted. Disk /dev/sda: 2000.4 GB, 2000398934016 bytes 255 heads, 63 sectors/track, 243201 cylinders, total 3907029168 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 4096 bytes I/O size (minimum/optimal): 4096 bytes / 4096 bytes Disk identifier: 0x8c361cb5 Device Boot Start End Blocks Id System /dev/sda1 1 3907029167 1953514583+ ee GPT Partition 1 does not start on physical sector boundary. Disk /dev/sdb: 8178 MB, 8178892800 bytes 255 heads, 63 sectors/track, 994 cylinders, total 15974400 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x0006a87e Device Boot Start End Blocks Id System /dev/sdb1 * 2048 15972351 7985152 b W95 FAT32 ubuntu@ubuntu:~$ Can anybody shed some light? thank you in advance EDIT Hey, i just did another trial with 13.04 this time and still no luck. bios: secure-boot: disabled enable CSM : always 1-delete previous ubuntu partition and swap area partition.now having free space 2- used usb installer to prepare usb with ubuntu-13.04-desktop-amd64.iso 3- rebooted : liveusb didnt detect windows 8, used something else 4-created partition ext4 for / 5-created partition for swap-area 6- default grub path is /dev/sda and clicked install Acer always boots into windows.

    Read the article

  • ATI Radeon HD7000 Series (Laptop) - Switch Mode Between ATI & Intel Integrated GPU. Stuck on Boot Screen On Intel GPU Selection Mode

    - by Monkey Drone
    Laptop Specs: HP Pavilion G6-2020SE GPUs 1) ATI HD7000 Series 2) Intel Integrated OS Installed: x) Ubuntu 12.04 (64 bit) i) ATI Graphics Card Drivers Installed From AMD website. Note: Graphics Card Drivers are Working Fine in 3D Mode. It runs a little Hot as it should since its a GPU. Observation) AMD Catalyst Control Centre Lets me Choose If I want to run the system in HIGH-END (ATI GPU) OR Intel Integrated (Better battery life) While I am on High End GPU Choice, Ubuntu works fine. Problem) But when I switch to Intel Mode in the AMD CCC and reboot the Machine. Ubuntu goes into 'Low Graphics Mode'. The problem is not that it goes into low graphics mode, it is completely expected since I am no longer using the ATI GPU but the integrated Intel GPU. Problem starts with the 'Selection' of the options. During that screen, I have no mouse on the screen (even tried plugging in an external USB mouse) & No Keyboard functionality. Thus I am left completely disabled to choose any option and load into Ubuntu. The Only thing I can do is switch to a terminal and enable ATI GPU through command-line and Ubuntu works Fine again. Is it a bug that there is no mouse/keyboard available to me during the startup of Ubuntu when its launched in Low-Graphics Mode? Any suggestions on how to pass through that? My palms are sweating as I write this down because the ATI GPU is really heating up my laptop. I dont want to boot into Windows or keep it around any longer than necessary. Please advise with help and directions. Sincerely, MonkeyD Edit1: The Answer by Celso has helped me switch to Intel, thus giving me sufficient battery power. Kudos to Celso. Now I can at least use my laptop for the time being without having it burn hair off my skin. I am still looking for answer to my original question of, 'why is lightdm not working properly when I switch to Intel GPU using ATI HD7000 series official drivers provided by AMD'.

    Read the article

  • Can't access some websites using Ubuntu 13.10

    - by Adame Doe
    Something's wrong with Ubuntu. Since I've upgraded to 13.10, I can't access some websites for no apparent reason. I've tried everything imaginable to solve this problem : Made sure that MTUs are the same, Disabled IPv6 in both the network manager and used browsers, Deactivated my network keys, DMZed my computer, Used other DNS like Google and OpenDNS, Checked that no firewall was running my computer ... And it's the same result. I even tried to reinstall Ubuntu a couple of times, but no luck. The most annoying thing about it is I can't access wordpress.org! So, there's no way it could be an ISP restriction of some kind. When I use a VPN, I can access pretty much anything. I'm really frustrated because I have to use wordpress.org very often. Any clue? ifconfig adame@adame-ws:~$ ifconfig eth0 Link encap:Ethernet HWaddr 00:26:18:3d:b0:7c inet addr:10.42.0.1 Bcast:10.42.0.255 Mask:255.255.255.0 inet6 addr: fe80::226:18ff:fe3d:b07c/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:8024 errors:0 dropped:0 overruns:0 frame:0 TX packets:7966 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:684480 (684.4 KB) TX bytes:616608 (616.6 KB) lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:65536 Metric:1 RX packets:8222 errors:0 dropped:0 overruns:0 frame:0 TX packets:8222 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:568269 (568.2 KB) TX bytes:568269 (568.2 KB) wlan0 Link encap:Ethernet HWaddr 00:19:70:40:85:eb inet addr:192.168.2.3 Bcast:192.168.2.255 Mask:255.255.255.0 inet6 addr: fe80::219:70ff:fe40:85eb/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1464 Metric:1 RX packets:123705 errors:0 dropped:0 overruns:0 frame:0 TX packets:98141 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:94963545 (94.9 MB) TX bytes:10387470 (10.3 MB) /etc/hosts 127.0.0.1 localhost 127.0.1.1 adame-ws ::1 ip6-localhost ip6-loopback fe00::0 ip6-localnet ff00::0 ip6-mcastprefix ff02::1 ip6-allnodes ff02::2 ip6-allrouters tracepath wordpress.org 1: adame-ws.local 0.092ms pmtu 1500 1: 192.168.2.1 1.300ms asymm 2 1: 192.168.2.1 1.060ms asymm 2 2: no reply 3: no reply 4: no reply 5: no reply 6: no reply 7: no reply 8: no reply ... keep on going like that ping wordpress.org adame@adame-ws:~$ ping wordpress.org PING wordpress.org (66.155.40.250) 56(84) bytes of data. --- wordpress.org ping statistics --- 10 packets transmitted, 0 received, 100% packet loss, time 9071ms

    Read the article

  • Why do some user agents have spam urls in them (and why are they always Opera/Presto User-Agents)?

    - by Erx_VB.NExT.Coder
    If you go to (say) the last 100 entries (visits) to the botsvsbrowsers.com website (exact link, feel free to take a look: http://www.botsvsbrowsers.com/recent/listings/index.html ), you'd notice that almost every User Agent that has the keywords "Opera" and "Presto" inside them, will almost certainly have a web link (URL/Web Address) inside it, and it won't just be a normal web address, but a HTML anchor tag/link to that address. Why is this so, I could not even find a single discussion about it on the internet, nowhere, I tried varying my search terms many times. If the user agent contains the words "Opera" and "Presto" it doesnt mean it will have this weblink, but it means there is about an 80% change that it will. A typical anchor tag/link inside a user agent will look like this: Mozilla/4.0 <a href="http://osis-uk.co.uk/disabled-equipment">disability equipment</a> (Windows NT 5.1; U; en) Presto/2.10.229 Version/11.60 If you check it out at the website, http://www.botsvsbrowsers.com/recent/listings/index.html you will notice that the back and forward arrows are in there unescaped format. This isn't just true for botsvsbrowsers, but several other user agent listing sites. I'm really confused and feel line I'm in a room full of 10,000 people and am the only one seeing this ghost :). If I'm doing statistical analysis, should I include or exclude this type of user agent from my listing (ie: are these just normal users who've set their user agents to attempt to drive some traffic to their sites as they browser the web), or is there something else going on? The fact that it is so consistent in terms of its format leads me to believe that it is an automated process (the setting or alteration of the user agent) so I cannot decide or understand the process by which this change is made (I know how to change a user agent), but unsure which program or facility is doing this, especially since it is exclusive to Opera (Presto) user agents that are beyond I think an 8 or 9 point something browser version. I've run some statistical tests, parsing entries from all over the place, writing custom programs, to get a better understanding of this. Keep in mind that I see normal URL's in user agents infrequently, they are just text such as +http://www.someSite.com appended to a user agent normally, especially if its a crawler or bot it provided its service URL, this is normal and isnt done with an embedded link (A HREF=) etc, so I'm not talking about "those".

    Read the article

  • Operation times out trying to SSH outside LAN i.e. from internet to LAN no connection is established

    - by Pelle L
    I run Ubuntu 12.04 and have no success connecting with SSH from "Internet". The router is a TL-MR3420 which is set up to forward requests to one of the NIC's on ubuntu machine (which has in total 3 NICs). I can SSH from a client on the "local" network/LAN. The forward mechanism in the router seems to work. If I stop SSH service on the Ubuntu machine and instead start one on the windows machine - it works like a charm. I do not use the Std port 22 but that shouldn't be an issue as far as I understand - sine it works on the same port on the win machine. Since my public IS isn't static I use a dynDNS service but as said earlier the same setup works from the win machine. The router is located on 192.168.0.1 The Ubuntu NICs has the following IP: eth2 192.168.0.100 , eth1 192.168.0.101 , eth0 192.168.0.102 and I have forwarded the "outside" request to 192.168.0.100 In regards for firewall settings on the Ubuntu machine I have disabled the ufw and the command ufw status give status: inactive. I don't now it this is relevant information but teh command iptables --list give: Chain INPUT (policy ACCEPT) target prot opt source destination Chain FORWARD (policy ACCEPT) target prot opt source destination Chain OUTPUT (policy ACCEPT) target prot opt source destination I have tried to catch traffic with help of wireshark (a tool I'm not too used to use) and it seems as a few (3?) "requests" actually reaches the NIC but ... nothing happens. The syslog does not show any entries during these attempts. Perhaps it could be some routing issues but I have reached my level of competence and are stuck ... all help and support to get this sorted out is much appreciated. I'm new to Linux so please do not assume I have a configuration that is correct - but as I wrote earlier - if the client that initiate SSH is on the LAN it all works. PS:I have also tried to get VPN (PPP) working from Internet with no success - once again VPN works on the windows machine ... so my best guess is that this is related to how the ubuntu machine handles (IP) traffic and not the TL-MR3420 router or other network issues.

    Read the article

  • Can my machine run Ubuntu( kubuntu | xubuntu | mint ) 12.04 WELL?

    - by Steve
    I have a 9 year old computer packing the hardware listed below. My question is, can I run 12.04 ( Ubuntu, Kubuntu, MINT or Xubuntu ) WELL? I was running Ubuntu 10.10 and I upgraded to 12.04 by going through each release via the update manager: 11.04 - 11.10 -12.04 During the installation process for 12.04 I saw an error message that there was an error installing and setting up part of the kernel. Later, when I tried installing a package in synaptic, I got another error message mentioning the kernel. When I rebooted, I got told somehting about my video and graphics was not configured properly and that I would have to do it manually ( like I know ). It gave me the option to enter the system in low graphics mode, but it just hanged. I had an old livecd of Xubuntu 10.10 around so I used that to get into my computer and copy data over to an external hard drive. I think tried to install Xubuntu 10.10 from the livecd, with the option "download updates" checked. The install process moved along a bit, then halted for about 5 hours. I rebooted my machine and tried the Xubuntu 10.10 installer WITHOUT the option to "download updates". The install completed in about 15 minutes. So, all of that is making me wonder if there is someting about 12.04 that does not like my hardware. I'm willing to try again, but only if I know I will not have to spend hours just to get to an error message and a hosed up system like I did last night. I also think I have a lot more RAM than is being reported in the output below. I had extra ram installed last year. I'm not good with the command line readouts, but there seems like there should be a lot more. I wasn't thrilled with Unity. I am willing to try Kubuntu 12.04. Will I run into the same problems? What is the highest version of a *ubuntu can I upgrade to? Thanks CPU Model: Intel(R) Pentium(R) 4 CPU 2.53GHz Frequency: 2533.223 MHz L2 Cache: 512 KB Bogomips: 5066.44 Numbering: family(15) model(2) stepping(7) Flags: fpu vme de pse tsc msr pae mce cx8 apic mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe up pebs bts cid RAM ~$ free -mt total used free shared buffers cached Mem: 1506 891 615 0 91 521 -/+ buffers/cache: 278 1227 Swap: 1609 0 1609 Total: 3116 891 2225 Video Card 01:00.0 VGA compatible controller: nVidia Corporation NV18 [GeForce4 MX 440 AGP 8x] (rev a2) (prog-if 00 [VGA controller]) Subsystem: ASUSTeK Computer Inc. V9180 Magic Flags: bus master, 66MHz, medium devsel, latency 32, IRQ 16 Memory at fd000000 (32-bit, non-prefetchable) [size=16M] Memory at f0000000 (32-bit, prefetchable) [size=64M] Expansion ROM at fe9e0000 [disabled] [size=128K] Kernel driver in use: nouveau Kernel modules: nouveau, nvidiafb Motherboard Intel 845PE ATX 533FSB DDR333 USB2

    Read the article

  • how did Google Analytics kill my site?

    - by user1813359
    Yesterday I created a google analytics profile for one of my sites and included the JS block in the layout template. What happened next was very strange. Within about 2 minutes, the site had become unreachable. I had been checking the AWStats page for the site when I thought to set up GA. After that had been done, I clicked on the link for 404 stats, which opens in a new tab. It churned for a long while and then showed a nearly blank page, similar to that when Firefox chokes on a badly-formatted XML page, except there was no error msg. But i was logged into the server and could see that that page has a 401 Transitional DTD. Strange! I tried viewing source but it just churned endlessly. I then tried "inspect element" and was able to see an error msg having to do with some internal Firefox lib. Unfortunately, i neglected to copy that. :-( All further attempts to load anything on the site would time out. Firebug's Net panel showed no request being made. Chrome would time out. So, I deleted the GA profile, removed the JS block, and cleared the server cache. No joy. I then removed all google cookies and disabled JS. Still nothing. No luck in any other browser. And now my client couldn't access the site. Terrific. I was able use wget while logged into another server. The retrieved page was fine, and did not contain the GA JS block. However, the two servers are on the same network. (Perhaps a clue.) The server itself was fine. Ping, traceroute looked great. I could SSH in. I tailed the access log and tried a browser request. Nothing. But i forgot to quit and a minute or so later I saw a request from someone else being logged. Later, I could see that requests had been served all day to some people. Now, 24 hours later, the site works once again, but is still unreachable by the client (who is in another city). So, does anyone have some insight into what's going on? Does this have something to do with google's CDN? I don't know very much about how GA works but what I'm seeing reminds me of DNS propagation issues. And why the initial XML error? And why the heck was the site just plain unreachable? What did google do to my site?! Sorry for the length but I wanted to cover everything.

    Read the article

  • 12.04 Booting into Terminal

    - by user170796
    To preface this, I would like to say that I am completely new to Ubuntu and have essentially zero programming experience/experience working with command line and terminal. I installed Ubuntu because I would like to get into programming. If you could provide me with the simplest instructions possible, I would be grateful. I have a Lenovo Ideapad Y500 (Intel i7, NVidia GT 750m, 1TB HDD, 16GB SSD cache, 8GB RAM) with Windows 8 on it. Using a Live CD, I installed Ubuntu 12.04 onto a 75 GB partition. During the installation, I kept all default settings except for one thing; I decided to encrypt my home folder, and so checked the corresponding box. The installation completed, and I restarted. Once I restarted, I saw the options "Ubuntu, with Linux 3.2.0-23-generic" "Ubuntu, with Linux 3.2.0-23-generic (recovery mode)" "Memory test (memtest86+)" "Memory test (memtest86+, serial console 115200)" "Windows Recovery Environment (loader) (on /dev/sdb3)" "Windows 8 (loader) (on /dev/sdb5)" "System Setup" I chose the first option, and was directed to a screen with the Ubuntu logo and the row of five dots below that change from orange to white. Then, I was brought to a full screen terminal that prompted me to login, which I did. I saw no option to boot into GUI at all, and am lost. I've been searching around and have tried the "startx" command to no avail. Should the command have some sort of context or something? I've also tried selecting the recovery mode option from the boot manager. I've tried the resume option from the following menu, which eventually just shuts down the computer after displaying a lot of scrolling text that's too fast for me to read. I've also tried the failsafex mode from the recovery mode menu, which only brings up a terminal box at the bottom of the window that covers the entire bottom part of the screen. Commands won't work in this window. When I try to access Windows 8, I get a message saying that the EFI file path was not specified or something along those lines. I had to enable Secure Boot in order to access Windows 8 (I had disabled it to be able to boot from the Live CD), which is functioning normally. I am at a complete loss for what to do. Any help will be extremely appreciated. EDIT: Bonus question! If you could figure out a way for me to boot to Windows 8 without having to enable Secure Boot, it would save me a lot of trouble. I can deal with switching every time, but I'd rather not have to.

    Read the article

< Previous Page | 114 115 116 117 118 119 120 121 122 123 124 125  | Next Page >