Search Results

Search found 4241 results on 170 pages for 'dual nic'.

Page 118/170 | < Previous Page | 114 115 116 117 118 119 120 121 122 123 124 125  | Next Page >

• Intel Core i5-2467m - Turbo Boost not activating?

  - by Trevor Sullivan

  I have a Samsung Series 5 laptop with an Intel Core i5-2467m process @ 1.6Ghz. The processor supports Intel Turbo Boost up to 2.30 Ghz according to the specifications. The i5-2467m is a dual-core process with HyperThreading, so there is a total of four (4) virtual cores in Windows 7 SP1. http://ark.intel.com/products/56858/ I've installed the Intel Turbo Boost Technology Monitor v2.6 to monitor if Turbo Boost is enabled, and set it to "Always On Top." I followed this process to max out the CPU: Open (4x) PowerShell instances Set each instance's affinity to a distinct CPU vCore Ran this code in each instance: while (1 -eq 1) { } Unfortunately, after maxing out all 4 cores, my laptop got hot, but Turbo Boost never kicked in. Any ideas on how to ensure that I'm getting the 2.3Ghz Turbo Boost capability of my laptop?

  Read the article

• Latency between IIS and SQL on same physical, two VMs

  - by Jerad Rose

  I have a single server (2x4 core CPUs, 32GB ram), that is a Windows Server 2012 Hyper V host, and it hosts two guest VMs (also Windows Server 2012 instances). One of them is a web server, the other is a SQL server. When hitting a page that loops over 50 records, there is noticeable latency. I capture/report the timings of each iteration on the loop, and each iteration is about 20-30 milliseconds. Of course, this amounts to over a second of latency for the whole loop. I thought maybe SQL needed to be tuned, but running profiler on it, the queries are showing almost 0 duration, so it seems the bottleneck is in transit between the two VMs. I have both VMs configured to use the actual NIC (vs. using a VNIC), so maybe that's part of my problem. Also, this is a classic ASP site, so it's using the SQL OLE DB provider, and I'm wondering if that is part of the problem. This is a new server setup, from an existing Windows 2003/IIS6 server setup where both web and DB run on the same server instance (no virtualization). On that setup, there is no such latency when looping over the cursor like this. But there are so many variables, I'm not sure where to start ruling things out.

  Read the article

• Performance mitigations serving content from a UNC share via IIS 6

  - by codepoke

  I have a quad processor vmware instance running Windows 2003 and 1gb ethernet. I'm comparing serving the exact same heavy .NET 2.0 content from the local hard drive versus serving it from a UNC drive. If I use WCAT to load it down, I see about a 40% reduction in transactions/sec while serving from the UNC. Processor time barely moves from 45% and the NIC sits around 40% either way. I don't see any significant memory loading either way. Context Switches/Transaction, though, more than doubles when serving from the UNC. Pathlengths more than double as well, but I believe that's just an expression of the effect of context switching. All told, it looks like the bottleneck is processor switching while waiting on content from the UNC share. Is my experience about the norm? Is there some mitigation I might try? I twiddled HKLM\System\CurrentControlSet\Services\LanmanWorkstation\Parameters\MaxCmds a little bit per http://technet.microsoft.com/en-us/library/dd296694(WS.10).aspx, but to no obvious effect. I kind of doubt my problem is lack of connections, but rather just the act of switching from thread to thread while waiting on data.

  Read the article

• Snow Leopard Compatible Drivers for Moschip MCS7720 USB-to-Serial Controller

  - by Kristopher Johnson

  We are using Cables Unlimited USB-2925 USB-to-Dual-DB9 serial cables, which use the Moschip MCS7720 controller. We have downloaded the newest driver from http://www.moschip.com/mcs7720.php, but that driver was last updated in 2005. It does not seem to be working with Macs running OS X 10.6 Snow Leopard. We have sent emails to the support addresses for both Cables Unlimited and Moschip. Cables Unlimited says they are checking with Moschip. No responses from Moschip yet. Does anyone know of any updates for this driver, or are there any ways to get the driver to work with Snow Leopard?

  Read the article

• Which linux distro for a laptop in windows environmet?

  - by Dev er dev

  I just got new laptop at work. What would you recommend as a linux distribution for it? All other developers are working under windows, and use windows tools. I'm currently using ArchLinux, but want to change it. I don't want to waste time configuring wireless, windows network shares, network pritners, projector, etc ... I want this stuff to just work, while still having sane and stable development evironment and tools. Is Ubuntu a good choice for this? I use gentoo at home, but don't think it is a good match for work environmet. EDIT: Note that we are working on cross platform apps, and deployment platform is almost always linux. There are very few windows apps that I have to use (like MS Project). It is just that everything else is windows centric. I use linux because I feel more productive with it, even if I have to dual boot to edit MS Project files.

  Read the article

• Word documents very slow to open over network, but fine when opened locally - on one machine

  - by Craig H

  Windows XP, Word 2003, patched. The issue is happening with several Word documents stored on a network drive. The Word documents are clearly a bit wonky (i.e. one is 675k, but if you copy everything but the last paragraph marker into a new document, the new document is only 30k). But that's only part of the problem. On one weird machine, and one machine only, it takes ~20 seconds to open these Word documents from the network drive. Copy the file to C: on that werid machine? Opens immediately. Go to other machines (that are very similar - same patch level, etc.) and open the same document from the network? Opens immediately. Delete normal.dot? 20 seconds. Login with a different user on the weird machine? 20 seconds. Plug wonky machine into a different network port? 20 seconds. So the problem appears to be hardware related (i.e. wonky internal NIC) or related to a setting that is not profile specific. Any ideas? "Scrubbing" all the documents isn't ideal for several reasons. This is driving me nuts because I swear I ran into this before many years ago and eventually figured it out. But I appear to have lost my notes.

  Read the article

• Synergy setup broke on upgrade

  - by CoatedMoose

  I had synergy setup working fine with version 1.3.7, however I got a new computer and decided to set it up as well. Because the setup I was working with was ubuntu (server - dual monitors) mac (client) and the new computer (replacing the mac) was windows, I ended up updating everything to 1.4.10. ______ ______ ______ | mac | ubu1 | ubu2 | |______|______|______| The problem is currently that dragging to the left of ubu1 causes the cursor on the mac to flicker briefly and then the cursor shows up at the bottom right corner of ubu2. Here is my .synergy.conf section: screens Andrews-Mac-Mini: ctrl = ctrl alt = meta super = alt Andrew-Ubuntu: end section: links Andrew-Ubuntu: left = Andrews-Mac-Mini Andrews-Mac-Mini: right = Andrew-Ubuntu end And the output from synergys -f NOTE: client "Andrews-Mac-Mini" has connected INFO: switch from "Andrew-Ubuntu" to "Andrews-Mac-Mini" at 1679,451 INFO: leaving screen INFO: screen "Andrew-Ubuntu" updated clipboard 0 INFO: screen "Andrew-Ubuntu" updated clipboard 1 INFO: switch from "Andrews-Mac-Mini" to "Andrew-Ubuntu" at 2398,833 INFO: entering screen

  Read the article

• explorer.exe eating all CPU, how to to detect culprit?

  - by JohnDoe

  Windows 7 64bit. I am using ProcessExplorer from Sysinternals, and it says, that the offending call is ntdll.dll!RtlValidateHeap+0x170 however, the call stack towards the entry is always different, so it's hard for me to track the problem. Maybe it's a mal-programed trojan, causing exceptions in Explorer.exe, but that is only a wild speculation. Explorer.exe is then consuming 25% (a core on a dual core). Killing the process makes the task bar go away, respawning from task manager, and half a minute later it's again eating all CPU cycles.

  Read the article

• Issues resolving DNS entries for multi-homed servers

  - by I.T. Support

  This is difficult to explain, so bear with me. We have 2 domain controllers, each multi-homed to straddle 2 internal subnets, (subnet A and subnet B) and provide dns, dhcp, and ldap authentication. Both domain controllers each have 2 DNS entries. both entries have identical host names, but correspond to subnet A & subnet B respectively (example entries shown): dc1 host 192.168.8.1 dc1 host 192.168.9.1 dc2 host 192.168.8.2 dc2 host 192.168.9.2 We also have a 3rd subnet for our dmz, (subnet C) which neither domain controller has an IP address on, but our firewall/routing tables provide access to subnet A from subnet C and vice versa, but don't allow access to subnet B from subnet C. Here's my issue. How can I force/determine which dns entry is used when a server on subnet C queries either domain controller by host name? Right now it seems to randomly pick one of the two entries, swaps out the name for the IP address and that's that. The problem is if it randomly selects the entry that corresponds to the 9.x subnet B (no access from subnet C), then the server fails to resolve. If it picks the entry for the 8.x subnet A then it resolves (firewall/routing tables defined for communication between these 2 subnets) Here's what I'd like to know: What are Best Practices (if any) for dealing with DNS resolution on subnets that the DNS servers don't have a presence on? Can I control something akin to a metric value to force an order of DNS resolution when there are multiple entries for the same host name that correspond to different IP subnets? Should I even have 2 DNS HOST entries for the same name? Here's what I'd like to avoid: Making edits to the HOSTS files of servers on subnet C to force DNS resolution of the hostname to the appropriate subnet Adding NIC's to the DC's to have them straddle the DMZ as well, thus obtaining a third DNS entry that corresponds to subnet C Again, my apologies if this was too verbose / unclear. Thanks!

  Read the article

• 3 monitors windows xp

  - by c0mrade

  I have a laptop mounted to a dock. When I try to use 2 monitors using dualview everything works fine I get my image across 2 monitors, but when I connect the third one I can't use it although its recognized. Here's what I'd like to do, I'd like to get dual view from my laptop across two monitors, and I have a remote machine connecting to it via remote desktop. I'd like to have that displayed on the third monitor. Is that possible? or some other combination?

  Read the article

• Linux Kernel Packet Forwarding Performance

  - by Bob Somers

  I've been using a Linux box as a router for some time now. Nothing too fancy, just enabling forwarding in the kernel, turning on masquerading, and setting up iptables to poke a few holes in the firewall. Recently a friend of mine pointed out a performance problem. Single TCP connections seem to experience very poor performance. You have to open multiple parallel TCP connections to get decent speed. For example, I have a 10 Mbit internet connection. When I download a file from a known-fast source using something like the DownThemAll! extension for Firefox (which opens multiple parallel TCP connections) I can get it to max out my downstream bandwidth at around 1 MB/s. However, when I download the same file using the built-in download manager in Firefox (uses only a single TCP connection) it starts fast and the speed tanks until it tops out around 100 KB/s to 350 KB/s. I've checked the internal network and it doesn't seem to have any problems. Everything goes through a 100 Mbit switch. I've also run iperf both internally (from the router to my desktop) and externally (from my desktop to a Linux box I own out on the net) and haven't seen any problems. It tops out around 1 MB/s like it should. Speedtest.net also reports 10 Mbits speeds. The load on the Linux machine is around 0.00, 0.00, 0.00 all the time, and it's got plenty of free RAM. It's an older laptop with a Pentium M 1.6 GHz processor and 1 GB of RAM. The internal network is connected to the built in Intel NIC and the cable modem is connected to a Netgear FA511 32-bit PCMCIA network card. I think the problem is with the packet forwarding in the router, but I honestly am not sure where the problem could be. Is there anything that would substantially slow down a single TCP stream?

  Read the article

• Linux Ubuntu: Updating the GRUB menu

  - by Mr X

  So apparently there are 2 versions of Linux on my laptop(I have a dual boot system with Linux and Windows 8 but Linux is the master OS). One of them uses the Kernel version 3.11.0 whose headers + source code are incompatible with my wireless driver. My laptop is a Toshiba Satellite with a Realtek RTL8188CE wireless lan.So the newer kernel version is still the first option on the menu and to get to Linux I use the "Previous versions of linux" which is running Kernel version 3.2.0-55. What can I do to update the grub menu so that Linux version with the 3.2.0-55 Kernel appears as the primary option? Do I need to get rid of/uninstall the newer kernel version? How can I do this without screwing up Linux entirely?

  Read the article

• SNAT through Racoon IPSec VPN

  - by Mite fine d'ailes

  I am trying to route traffic from a device (that I will call "target") connected to my Ubuntu box (that I will call "host") to servers at a remote office. The host uses a Racoon IPSec VPN, connected through a NIC called efix. This creates an aliased IF called efix:0 which has IP adress 192.168.190.132. It is able to reach the servers. The link between host and target is an Ethernet link, using IP adresses 10.0.0.1 on IF eusb for the host and 10.0.0.2 on IF eth0 for the target. I have setup the following routes and iptables entries: On target: 10.0.0.0 * 255.255.255.0 U 0 0 0 eth0 default 10.0.0.1 0.0.0.0 UG 0 0 0 eth0 On host: echo 1 > /proc/sys/net/ipv4/ip_forward iptables -t nat -A POSTROUTING -s 10.0.0.0/24 -j SNAT --to 192.168.190.132 iptables -A FORWARD -s 10.0.0.0/24 -j ACCEPT iptables -A FORWARD -d 10.0.0.0/24 -j ACCEPT Using Wireshark to monitor an HTTP GET, I can see SYN packets from the target go all the way to the server, but the server's SYNACK packets stop at the host and are not forwarded to the target. Am I missing something here ? Isn't SNAT supposed to keep track of the connections ?

  Read the article

• Apache hanging with MaxClients is reached

  - by Ash White

  My Apache 2.2 (preform MPM) is hanging when MaxClients is reached, rather than queueing up requests and serving them when child processes become free. When this happens, the web server is totally unresponsive until it is manually restarted. The server stack is Ubuntu 8, MySQL 5, PHP 5. Hardware is Dual Xeons (2.8) with 2GB of RAM. It serves 30,000 - 50,000 pageviews per day. Static images, CSS, and JS are offloaded to a separate server and PHP is cached using eAccelerator. The HTML output of many pages is cached to the filesystem. Relevant Apache directives: KeepAlive On MaxKeepAliveRequests 50 KeepAliveTimeout 2 StartServers 2 MaxClients 150 MinSpareThreads 25 MaxSpareThreads 75 ThreadsPerChild 25 MaxRequestsPerChild 2000

  Read the article

• Ext3 partition doesn't mount on Snow Leopard using MacFUSE

  - by Fez

  I'm dual-booting OS X and Ubuntu on a Macbook 4,1. I'm trying to mount my Linux partition in OS X. I installed MacFUSE 2.0.3,2 and fuse-ext2-0.0.7 on Snow Leopard 10.6.5. I created the directory /Volumes/Ubuntu and tried to mount the disk there using the command: fuse-ext2 /dev/disk0s4 /Volumes/Ubuntu/ This is the output I get: fuse-ext2: version:'0.0.7', fuse_version:'27' [main (../../fuse-ext2/fuse-ext2.c:324)] fuse-ext2: enter [do_probe (../../fuse-ext2/do_probe.c:30)] fuse-ext2: Error while trying to open /dev/disk0s4 (rc=13) [do_probe (../../fuse-ext2/do_probe.c:34)] fuse-ext2: Probe failed [main (../../fuse-ext2/fuse-ext2.c:340)] Any clue what's going wrong? Thanks!

  Read the article

• Recover OffScreen Window in Windows 8

  - by Jason McD

  Someone asked a very similar question in regards to window recovery for windows xp: Similar Recovery I'm using windows 8 (or 8.1 now). I run Dual Monitors. On Monitor 2 I sometimes have the input switched to something else other than the windows display (Mac or PS3). If there was a program that was displaying on Window #2 that does not have 'move' where I could potentially alt-space-m arrow keys. Is there another way to get that program to display on Window #1? I tried right click on the program and doesn't seem to be anything there. I tried Windows Key and Arrows. I Tried right click toolbar and cascade. I'm hoping this is a DUP or Softball question because this annoys the crap out of me. Thanks!!

  Read the article

• Installing Windows Server 2003 on AMD environment

  - by santhosh kumar

  Hi all, Our organisation we have 25 computers and we are trying to setup Windows Server 2003. We are planning to configure Active Directory NAT DNS server Visual Studio Team Foundation Server Subversion (SVN) Trac (Bug tracking tool) FTP server And our Hardware configuration is AMD Athlon 64 X2 Dual (Core processor 5600+, 2.60 GHz) Asus motherboard (M2N series) Transcend 4 GB RAM (800 MHz) 500 GB Hard Disk (RAID enabled) But my colleague is advising me AMD won't suite for servers platforms, and use Intel environment. Also they telling we can't install all the services to one server. I got confusion what to do?... Is really can`t install above services to AMD computer? Thanks...

  Read the article

• Unable to login to arch linux

  - by Ayodhya

  I am new to archlinux. I am using live usb for archlinux. When I booted it said not a COM32R image. I explored on Google, used Tab and choose have64 and then it booted. Now I am not able to login I used password root but it's not accepting. I also used startx but nothing happened. I am using archlinux-2014.06.01-dual iso downloaded from archlinux website. I see the the following Arch Linux Menu after boot-up Boot Arch Linux (x86_64)(NBD) Boot Arch Linux (x86_64)(NFS) Boot Arch Linux (x86_64)(HTTP) Boot Arch Linux (i686)(NBD) Boot Arch Linux (i686)(NFS) Boot Arch Linux (i686)(HTTP) Boot Existing OS I Choose First one and fourth one (NBD) for live boot and i am having the problem mentioned above.

  Read the article

• Intermittent "Lost connection to MySQL server at 'reading initial communication packet'"

  - by db2

  Our web environment consists of two servers. Web front-end. Dell PowerEdge R610, RHEL 5.5, Apache 2.2.17, php 5.2.14. Database server. Dell PowerEdge R710, Windows 2008 R2 Standard x64, MySQL 5.5.11-log x64. Normally these two work perfectly fine together. However, when I try to get them talking via a dedicated LAN on their secondary NICs (each machine has four of them), things get flaky. I have NIC #2 on both machines configured on the 172.16.1.0/24 subnet, with no gateway or DNS servers (obviously, since it's just those two systems), and I put the private IP address of each machine into the hosts file of the other. The routing tables on both machines look okay after I do this. I've tried this with both a crossover cable draped directly between the two NICs, and also via a dedicated vlan on the switch in the rack. In either case, I get intermittent connection problems. It's a fairly small percentage of connections that fail, but it's enough to cause a significant problem, and I have to switch back to the main network connection, which will contend with all the other traffic and hosts on the switch. The full error message that appears in the application log: SQLSTATE[HY000] [2013] Lost connection to MySQL server at 'reading initial communication packet', system error: 110 Am I doing something really dumb that's causing this to not work properly? Anything I can check in MySQL that would explain why it's failing to connect occasionally?

  Read the article

• KVM Guest with NAT + Bridged networking

  - by Daniel

  I currently have a few KVM Guests on a dedicated server with bridged networking (this works) and i can successfully ping the outside ips i assign via ifconfig (in the guest). However, due to the fact i only have 5 public ipv4 ip addresses, i would like to port forward services like so: hostip:port - kvm_guest:port UPDATE I found out KVM comes with a "default" NAT interface, so added the virtual NIC to the Guest virsh configuration then configured it in the Guest, it has the ip address: 192.168.122.112 I can successfully ping 192.168.122.112 and access all ports on 192.168.122.112 from the KVM Host, so i tried to port forward like so: iptables -t nat -I PREROUTING -p tcp --dport 5222 -j DNAT --to-destination 192.168.122.112:2521 iptables -I FORWARD -m state -d 192.168.122.0/24 --state NEW,RELATED,ESTABLISHED -j ACCEPT telnet KVM_HOST_IP 5222 just hangs on "trying" telnet 192.168.122.112 2521 works [root@node1 ~]# tcpdump port 5222 tcpdump: WARNING: eth0: no IPv4 address assigned tcpdump: verbose output suppressed, use -v or -vv for full protocol decode listening on eth0, link-type EN10MB (Ethernet), capture size 65535 bytes 23:43:47.216181 IP 1.152.245.247.51183 > null.xmpp-client: Flags [S], seq 1183303931, win 65535, options [mss 1400,nop,wscale 3,nop,nop,TS val 445777813 ecr 0,sackOK,eol], length 0 23:43:48.315747 IP 1.152.245.247.51183 > null.xmpp-client: Flags [S], seq 1183303931, win 65535, options [mss 1400,nop,wscale 3,nop,nop,TS val 445778912 ecr 0,sackOK,eol], length 0 23:43:49.415606 IP 1.152.245.247.51183 > null.xmpp-client: Flags [S], seq 1183303931, win 65535, options [mss 1400,nop,wscale 3,nop,nop,TS val 445780010 ecr 0,sackOK,eol], length 0 7 packets received by filter 0 packets dropped by kernel [root@node1 ~]# iptables -L Chain INPUT (policy ACCEPT) target prot opt source destination Chain FORWARD (policy ACCEPT) target prot opt source destination ACCEPT all -- anywhere 192.168.122.0/24 state NEW,RELATED,ESTABLISHED Chain OUTPUT (policy ACCEPT) target prot opt source destination All help is appreciated. Thanks.

  Read the article

• Screen broken of mi laptop, start with an external monitor

  - by Widrogo

  hi now I have a big problem my brother broken the screen of mi laptop, now the replacement of my screen arrives in three weeks, now I can not lose three weeks because my homework be in my memory, now I need start the laptop with external monitor, I want to know if there is a way to boot from the boot my laptop because I have dual boot and password I can not access my laptop with an external monitor for this reason. Now there is a way to start my laptop directly to an external monitor. I look for a solution, I need to remove my broken laptop screen and automatically will recognize the vga monitor but did not work me now i look for a solution and find that i need

  Read the article

• Can I drive two external screens from an 'Alu' iMac?

  - by robsoft

  I've got a 24" 2.4 Ghz Core 2 Duo iMac. It's about 18 months old, though I can't specifically remember when I bought it. It has a Displayport Mini-DVI socket on the back, and currently I have that linked to a DVI adaptor driving a Philips 20" widescreen monitor in portrait mode (awesome for browsing). I have another, identical Philips monitor and wondered if there was a way of connecting that to the iMac too. Is there such a thing as a DisplayPort Mini-DVI to dual-DVIs adaptor? Can this iMac's graphics card even drive such a set-up? The graphics chipset in the iMac is reported as ATI Radeon HS2600, 256 MB. The main iMac display is 1920x1200 and the Philips display is 1050x1680 (@60Hz, rotated 90 degrees). The third screen would be another 1050x1680 and ideally I'd have it portrait again, too. EDIT: Please let this question stand - it's not a dupe. The current Mac laptops use 'Mini Displayport' connectors, which are not the same as DisplayPort Mini-DVI connectors.

  Read the article

• AMD Phenom 2 is idling at 50°C, can I get it cooler?

  - by liam

  Is it possible to damage a CPU so that it works, but only at high temperatures? My Phenom 2 1090T is idling at 50°C and I have tried everything to get it down. I can play Deus Ex HR, Arkham City, or Dirt 3 and it hovers around 60. I have cleaned out all my fans: 2 intake (front and side), 1 exhaust (Arctic Freezer). My machine is a brand new Antec 520 high current gamer. Also: Extreme3 770 8 GB Kingston DDR3 (2x4 GB) 750 GB Seagate Barracuda ASUS Xonar DG Radeon HD 5670 New Arctic Freezer Pro Rev 2 (days old and mounted properly with Arctic Silver 5). I also dropped an Athlon 250 dual core into my rig and that ran at under 30. Is the CPU dying? I know that 50°C idle for an AMD is not normal.

  Read the article

• Can't connect to a Hyper-V VM from anywhere but the host OS

  - by Elbelcho

  I have an unusual situation on hand where I'm able to connect to a Hyper-V guest VM from the HOST, but not from anywhere but the host. The VM is running WIn2k8R2 and has IIS installed and Remote Desktop enabled. If I browse to the IP from the host OS, the IIS7 page displays. I can also RDP into the guest OS from the host as well as ping. From OFF the host, RDP, web and ping all fail. If I completely shut off the guest VM's firewall, ping will then start to respond, but all RDP and port 80 still don't. The physical host machine has 2 nics installed, but only one is plugged in. The one plugged in has a static IP. I have one Hyper-V virtual network and it's set to external. The guest VM has one NIC with a different static IP than the host, but both are on the same subnet. The host machine is joined to the domain, the guest VM is not. Any sugestions? Thanks so much for any help you may be able to provide!

  Read the article

• taskmgr.exe 100% CPU Usage

  - by Burnsys

  Hi. I have 2 IBM servers Intel Xeon Dual core with 2gb RAM. the problem is that Taskmanager uses one full core when i open it. The same happens when i copy files in the explorer. OS: Windows 2003 Server Things i tried: Installed all updates They has kaspersky anti virus and they previously had Nod32. All drivers installed OK. All unused devices are disabled in the bios. Reinstalled win 2003 SP2. No conflict in drivers Tried opening via remote desktop and the problem continues. The cpu utilization is in the Kernel Times (Red in taskmanager) If i open Proces Explorer and i navigate to the threads consuming CPU the stack traces ends always in "NtkrnlPA!UnexpectedInterrupt", all threads stacks end in "UnexpectedInterrupt" ntoskrnl.exe!KiUnexpectedInterrupt+0x48 ntoskrnl.exe!KeWaitForMutexObject+0x20e ntoskrnl.exe!CcSetReadAheadGranularity+0x1ff9 ntoskrnl.exe!IoAllocateIrp+0x3fd ntoskrnl.exe!KeWaitForMutexObject+0x20e ntoskrnl.exe!NtWaitForSingleObject+0x94 ntoskrnl.exe!DbgBreakPointWithStatus+0xe05 ntdll.dll!KiFastSystemCallRet kernel32.dll!WaitForSingleObject+0x12 taskmgr.exe+0xeef6 kernel32.dll!GetModuleHandleA+0xdf Any help would be appreciated!

  Read the article

< Previous Page | 114 115 116 117 118 119 120 121 122 123 124 125  | Next Page >