Search Results

Search found 3277 results on 132 pages for 'technologies'.

Page 118/132 | < Previous Page | 114 115 116 117 118 119 120 121 122 123 124 125  | Next Page >

  • Windows Phone 8 Announcement

    - by Tim Murphy
    As if the Surface announcement on Monday wasn’t exciting enough, today Microsoft announce that Windows Phone 8 will be coming this fall.  That itself is great news, but the features coming were like confetti flying in all different directions.  Given this speed I couldn’t capture every feature they covered.  A summary of what I did capture is listed below starting with their eight main features. Common Core The first thing that they covered is that Windows Phone 8 will share a core OS with Windows 8.  It will also run natively on multiple cores.  They mentioned that they have run it on up to 64 cores to this point.  The phones as you might expect will at least start as dual core.  If you remember there were metrics saying that Windows Phone 7 performed operations faster on a single core than other platforms did with dual cores.  The metrics they showed here indicate that Windows Phone 8 runs faster on comparable dual core hardware than other platforms. New Screen Resolutions Screen resolution has never been an issue for me, but it has been a criticism of Windows Phone 7 in the media.  Windows Phone 8 will supports three screen resolutions: WVGA 800 x 480, WXGA 1280 x 768, and 720 1280x720.  Hopefully this makes pixel counters a little happier. MicroSD Support This was one of my pet peeves when I got my Samsung Focus. With Windows Phone 8 the operating system will support adding MicroSD cards after initial setup.  Of course this is dependent on the hardware company on implementing it, but I think we have seen that even feature phone manufacturers have not had a problem supporting this in the past. NFC NFC has been an anticipated feature for some time.  What Microsoft showed today included the fact that they didn’t just want it to be for the phone.  There is cross platform NFC functionality between Windows Phone 8 and Windows 8.  The demos , while possibly a bit fanciful, showed would could be achieved even in a retail environment.  We are getting closer and closer to a Minority Report world with these technologies. Wallet Windows Phone 8 isn’t the first platform to have a wallet concept.  What they have done to differentiate themselves is to make it sot that it is not dependent on a SIM type chip like other platforms.  They have also expanded the concept beyond just banks to other types of credits such as airline miles. Nokia Mapping People have been envious of the Lumia phones having the Nokia mapping software.  Now all Windows Phone 8 devices will use NavTeq data and will have the capability to run in an offline fashion.  This is a major step forward from the Bing “touch for the next turn” maps. IT Administration The lack of features for enterprise administration and deployment was a complaint even before the Windows Phone 7 was released.  With the Windows Phone 8 release such features as Bitlocker and Secure boot will be baked into the OS. We will also have the ability to privately sign and distribute applications. Changing Start Screen Joe Belfiore made a big deal about this aspect of the new release.  Users will have more color themes available to them and the live tiles will be highly customizable. You will have the ability to resize and organize the tiles in a more dynamic way.  This allows for less important tiles or ones with less information to be made smaller.  And There Is More So what other tidbits came out of the presentation?  Later this summer the API for WP8 will be available.  There will be developer events coming to a city near you.  Another announcement of interest to developers is the ability to write applications at a native code level.  This is a boon for game developers and those who need highly efficient applications. As a topper on the cake there was mention of in app payment. On the consumer side we also found out that all updates will be available over the air.  Along with this came the fact that Microsoft will support all devices with updates for at least 18 month and you will be able to subscribe for early updates.  Update coming for Windows Phone 7.5 customers to WP7.8.  The main enhancement will be the new live tile features.  The big bonus is that the update will bypass the carriers.  I would assume though that you will be brought up to date with all previous patches that your carrier may not have released. There is so much more, but that is enough for one post.  Needless to say, EXCITING! del.icio.us Tags: Windows Phone 8,WP8,Windows Phone 7,WP7,Announcements,Microsoft

    Read the article

  • "Guiding" a Domain Expert to Retire from Programming

    - by James Kolpack
    I've got a friend who does IT at a local non-profit where they're using a custom web application which is no longer supported by the company who built it. (out of business, support was too expensive, I'm not sure...) Development on this app started around 10+ years ago so the technologies being harnessed are pretty out of date now - classic asp using vbscript and SQL Server 2000. The application domain is in the realm of government bookkeeping - so even though the development team is long gone, there are often new requirements of this software. Enter the... The domain expert. This is an middle aged accounting whiz without much (or any?) prior development experience. He studied the pages, code and queries and learned how to ape the style of the original team which, believe me, is mediocre at best. He's very clever and very tenacious but has no experience in software beyond what he's picked up from this app. Otherwise, he's a pleasant guy to talk to and definitely knows his domain. My friend in IT, and probably his superiors in the company, want him out of the code. They view him as wasting his expertise on coding tasks he shouldn't be doing. My friend got me involved with a few small contracts which I handled without much problem - other than somewhat of a communication barrier with the domain expert. He explained the requirements very quickly, assuming prior knowledge of the domain which I do not have. This is partially his normal style, and I think maybe a bit of resentment from my involvement. So, I think he feels like the owner of the code and has entrenched himself in a development position. So... his coding technique. One of his latest endeavors was to make a page that only he could reach (theoretically - the security model for the system is wretched) where he can enter a raw SQL query, run it, and save the query to run again later. A report that I worked on had been originally implemented by him using 6 distinct queries, 3 or 4 temp tables to coordinate the data between the queries, and the final result obtained by importing the data from the final query into Access and doing a pivot and some formatting. It worked - well, some of the results were incorrect - but at what a cost! (I implemented the report in a single query with at least 1/10th the amount of code.) He edits code in notepad. He doesn't seem to know about online reference material for the languages. I recently read an article on Dr. Dobbs titled "What Makes Bad Programmers Different" - and instantly thought of our domain expert. From the article: Their code is large, messy, and bug laden. They have very superficial knowledge of their problem domain and their tools. Their code has a lot of copy/paste and they have very little interest in techniques that reduce it. The fail to account for edge cases, while inefficiently dealing with the general case. They never have time to comment their code or break it into smaller pieces. Empirical evidence plays no little role in their decisions. 5.5 out of 6. My friend is wanting me to argue the case to their management - specifically, I got this email from their manager to respond to: ...Also, I need to talk to you about what effect there is from Domain Expert continuing to make edits to the live environment. If that is a problem for you I need to know so I can have his access blocked. Some examples would help. In my opinion, from a technical standpoint, it's dangerous to have him making changes without any oversight. On the other hand, I'm just doing one-off contracts at this point and don't have much desire to get involved deeply enough that I'm essentially arguing as one of the Bobs from Office Space. I'd like to help my friend out - but I feel like I'm getting in the middle of a political battle. More importantly - if I do get involved and suggest that his editing privileges be removed, it needs to be handled carefully so that doesn't feel belittled. He is beyond a doubt the foremost expert on this system. I'm hoping this is familiar territory for some other stackechangers, because I'm feeling a little bewildered. How should I respond? Should I argue that he shouldn't be allowed to touch the code? Should I phrase it as "no single developer, no matter how experienced, should be working on production code unchecked"? Should I argue to keep him involved with the code, but with a review process? Should I say "glad I could help, but uh, I'm busy now!" Other options? Thanks a bunch!

    Read the article

  • Cloud Deployment Models

    - by B R Clouse
    Normal 0 false false false EN-US X-NONE X-NONE As the cloud paradigm grows in depth and breadth, more readers are approaching the topic for the first time, or from a new perspective.  This blog is a basic review of  cloud deployment models, to help orient newcomers and neophytes. Most cloud deployments today are either private or public. It is also possible to connect a private cloud and a public cloud to form a hybrid cloud. A private cloud is for the exclusive use of an organization. Enterprises, universities and government agencies throughout the world are using private clouds. Some have designed, built and now manage their private clouds. Others use a private cloud that was built by and is now managed by a provider, hosted either onsite or at the provider’s datacenter. Because private clouds are for exclusive use, they are usually the option chosen by organizations with concerns about data security and guaranteed performance. Public clouds are open to anyone with an Internet connection. Because they require no capital investment from their users, they are particularly attractive to companies with limited resources in less regulated environments and for temporary workloads such as development and test environments. Public clouds offer a range of products, from end-user software packages to more basic services such as databases or operating environments. Public clouds may also offer cloud services such as a disaster recovery for a private cloud, or the ability to “cloudburst” a temporary workload spike from a private cloud to a public cloud. These are examples of a hybrid cloud. These are most feasible when the private and public clouds are built with similar technologies. Usually people think of a public cloud in terms of a user role, e.g., “Which public cloud should I consider using?” But someone needs to own and manage that public cloud. The company who owns and operates a public cloud is known as a public cloud provider. Oracle Database Cloud Service, Amazon RDS, database.com and Savvis Symphony Database are examples of public cloud database services. Normal 0 false false false EN-US X-NONE X-NONE /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin:0in; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-fareast-font-family:"Times New Roman"; mso-fareast-theme-font:minor-fareast; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;} When evaluating deployment models, be aware that you can use any or all of the available options. Some workloads may be best-suited for a private cloud, some for a public or hybrid cloud. And you might deploy multiple private clouds in your organization. If you are going to combine multiple clouds, then you want to make sure that each cloud is based on a consistent technology portfolio and architecture. This simplifies management and gives you the greatest flexibility in moving resources and workloads among your different clouds. Oracle’s portfolio of cloud products and services enables both deployment models. Oracle can manage either model. Universities, government agencies and companies in all types of business everywhere in the world are using clouds built with the Oracle portfolio. By employing a consistent portfolio, these customers are able to run all of their workloads – from test and development to the most mission-critical -- in a consistent manner: One Enterprise Cloud, powered by Oracle.   /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin:0in; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-fareast-font-family:"Times New Roman"; mso-fareast-theme-font:minor-fareast; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;}

    Read the article

  • The Next Frontier: Java Embedded @ JavaOne

    - by Kristin Rose
    Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin:0in; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-fareast-font-family:"Times New Roman"; mso-fareast-theme-font:minor-fareast; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;} Now more than ever, the Java platform is the best technology for many embedded use cases. Java’s platform independence, high level of functionality, security, and developer productivity, address the key pain points in building embedded solutions... and that’s not just our opinion. Take a look at the new IDC report on Oracle’s stewardship of Java, “Java: Two and a half Years After the Acquisition” (doc #236309, August 2012). Java already powers around 3 billion devices worldwide, with traditional desktops and servers being only a small portion of that, and the ‘Internet of Things‘ is just really starting to explode. It is estimated that within five years, intelligent and connected embedded devices will outnumber desktops and mobile phones combined, and will generate the majority of the traffic on the Internet. Is your platform and services strategy ready for the coming disruptions and opportunities? It should come as no surprise that Oracle is enthusiastically focused on Java for Embedded .  New this year, Oracle is demonstrating its further commitment to the embedded marketplace by offering, for the first time, a dedicated conference focused on the business aspects of embedded Java: Java Embedded @ JavaOne. Co-located with the technically-focused JavaOne conference, Java Embedded @ JavaOne will run for two days in San Francisco targeting C-level executives, architects, business leaders, and decision makers. With 24 inspired business sessions with expert speakers from 18 prominent companies driving the next generation of Java Embedded business solutions (such as Cinterion, ARM, Hitachi and Rockwell Automation), attendees will learn how Java Embedded technologies and solutions can offer compelling value and a clear path forward to business efficiency and agility. You’ll also see how Oracle’s comprehensive technology portfolio can deliver a complete ‘Machine to Machine’ platform, from device to datacenter, resulting in a highly secure, resilient, high-performance and cost-effective solution. Seating is limited and we expect a lot of interest in this new event, so please register now! Note that if you are already attending the Oracle OpenWorld or JavaOne conferences, you can attend this conference for only $100 more. Watch my video below to find out more. I hope to see you there! Judson Althoff SVP of WWA&C Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin:0in; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-fareast-font-family:"Times New Roman"; mso-fareast-theme-font:minor-fareast; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;} Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin:0in; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-fareast-font-family:"Times New Roman"; mso-fareast-theme-font:minor-fareast; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;}

    Read the article

  • Building a Repository Pattern against an EF 5 EDMX Model - Part 1

    - by Juan
    I am part of a year long plus project that is re-writing an existing application for a client.  We have decided to develop the project using Visual Studio 2012 and .NET 4.5.  The project will be using a number of technologies and patterns to include Entity Framework 5, WCF Services, and WPF for the client UI.This is my attempt at documenting some of the successes and failures that I will be coming across in the development of the application.In building the data access layer we have to access a database that has already been designed by a dedicated dba. The dba insists on using Stored Procedures which has made the use of EF a little more difficult.  He will not allow direct table access but we did manage to get him to allow us to use Views.  Since EF 5 does not have good support to do Code First with Stored Procedures, my option was to create a model (EDMX) against the existing database views.   I then had to go select each entity and map the Insert/Update/Delete functions to their respective stored procedure. The next step after I had completed mapping the stored procedures to the entities in the EDMX model was to figure out how to build a generic repository that would work well with Entity Framework 5.  After reading the blog posts below, I adopted much of their code with some changes to allow for the use of Ninject for dependency injection.http://www.tcscblog.com/2012/06/22/entity-framework-generic-repository/ http://www.tugberkugurlu.com/archive/generic-repository-pattern-entity-framework-asp-net-mvc-and-unit-testing-triangle IRepository.cs public interface IRepository : IDisposable where T : class { void Add(T entity); void Update(T entity, int id); T GetById(object key); IQueryable Query(Expression> predicate); IQueryable GetAll(); int SaveChanges(); int SaveChanges(bool validateEntities); } GenericRepository.cs public abstract class GenericRepository : IRepository where T : class { public abstract void Add(T entity); public abstract void Update(T entity, int id); public abstract T GetById(object key); public abstract IQueryable Query(Expression> predicate); public abstract IQueryable GetAll(); public int SaveChanges() { return SaveChanges(true); } public abstract int SaveChanges(bool validateEntities); public abstract void Dispose(); } One of the issues I ran into was trying to do an update. I kept receiving errors so I posted a question on Stack Overflow http://stackoverflow.com/questions/12585664/an-object-with-the-same-key-already-exists-in-the-objectstatemanager-the-object and came up with the following hack. If someone has a better way, please let me know. DbContextRepository.cs public class DbContextRepository : GenericRepository where T : class { protected DbContext Context; protected DbSet DbSet; public DbContextRepository(DbContext context) { if (context == null) throw new ArgumentException("context"); Context = context; DbSet = Context.Set(); } public override void Add(T entity) { if (entity == null) throw new ArgumentException("Cannot add a null entity."); DbSet.Add(entity); } public override void Update(T entity, int id) { if (entity == null) throw new ArgumentException("Cannot update a null entity."); var entry = Context.Entry(entity); if (entry.State == EntityState.Detached) { var attachedEntity = DbSet.Find(id); // Need to have access to key if (attachedEntity != null) { var attachedEntry = Context.Entry(attachedEntity); attachedEntry.CurrentValues.SetValues(entity); } else { entry.State = EntityState.Modified; // This should attach entity } } } public override T GetById(object key) { return DbSet.Find(key); } public override IQueryable Query(Expression> predicate) { return DbSet.Where(predicate); } public override IQueryable GetAll() { return Context.Set(); } public override int SaveChanges(bool validateEntities) { Context.Configuration.ValidateOnSaveEnabled = validateEntities; return Context.SaveChanges(); } #region IDisposable implementation public override void Dispose() { if (Context != null) { Context.Dispose(); GC.SuppressFinalize(this); } } #endregion IDisposable implementation } At this point I am able to start creating individual repositories that are needed and add a Unit of Work.  Stay tuned for the next installment in my path to creating a Repository Pattern against EF5.

    Read the article

  • 2012&ndash;The End Of The World Review

    - by Tim Murphy
    The end of the world must be coming.  Not because the Mayan calendar says so, but because Microsoft is innovating more than Apple.  It has been a crazy year, with pundits declaring not that the end of the world is coming, but that the end of Microsoft is coming.  Let’s take a look at what 2012 has brought us. The beginning of year is a blur.  I managed to get to TechEd in June which was the first time that I got to take a deep dive into Windows 8 and many other things that had been announced in 2011.  The promise I saw in these products was really encouraging.  The thought of being able to run Windows 8 from a thumb drive or have Hyper-V native to the OS told me that at least for developers good things were coming. I finally got my feet wet with Windows 8 with the developer preview just prior to the RTM.  While the initial experience was a bit of a culture shock I quickly grew to love it.  The media still seems to hold little love for the “reimagined” platform, but I think that once people spend some time with it they will enjoy the experience and what the FUD mongers say will fade into the background.  With the launch of the OS we finally got a look at the Surface.  I think this is a bold entry into the tablet market.  While I wish it was a little more affordable I am already starting to see them in the wild being used by non-techies. I was waiting for Windows Phone 8 at least as much as Windows 8, probably more.  The new hardware, better marketing and new OS features I think are going to finally push us to the point of having a real presence in the smartphone market.  I am seeing a number of iPhone users picking up a Nokia Lumia 920 and getting rid of their brand new iPhone 5.  The only real debacle that I saw around the launch was when they held back the SDK from general developers. Shortly after the launch events came Build 2012.  I was extremely disappointed that I didn’t make it to this year’s Build.  Even if they weren’t handing out Surface and Lumia devices I think the atmosphere and content were something that really needed to be experience in person.  Hopefully there will be a Build next year and it’s schedule will be announced soon.  As you would expect Windows 8 and Windows Phone 8 development were the mainstay of the conference, but improvements in Azure also played a key role.  This movement of services to the cloud will continue and we need to understand where it best fits into the solutions we build. Lower on the radar this year were Office 2013, SQL Server 2012, and Windows Server 2012.  Their glory stolen by the consumer OS and hardware announcements, these new releases are no less important.  Companies will see significant improvements in performance and capabilities if they upgrade.  At TechEd they had shown some of the new features of Windows Server 2012 around hardware integration and Hyper-V performance which absolutely blew me away.  It is our job to bring these important improvements to our company’s attention so that they can be leveraged. Personally, the consulting business in 2012 was the busiest it has been in a long time.  More companies were ready to attack new projects after several years of putting them on the back burner.  I also worked to bring back momentum to the Chicago Information Technology Architects Group.  Both the community and clients are excited about the new technologies that have come out in 2012 and now it is time to deliver. What does 2013 have in store.  I don’t see it be quite as exciting as 2012.  Microsoft will be releasing the Surface Pro in January and it seems that we will see more frequent OS update for Windows.  There are rumors that we may see a Surface phone in 2013.  It has also been announced that there will finally be a rework of the XBox next fall.  The new year will also be a time for us in the development community to take advantage of these new tools and devices.  After all, it is what we build on top of these platforms that will attract more consumers and corporations to using them. Just as I am 99.999% sure that the world is not going to end this year, I am also sure that Microsoft will move on and that most of this negative backlash from the media is actually fear and jealousy.  In the end I think we have a promising year ahead of us. del.icio.us Tags: Microsoft,Pundits,Mayans,Windows 8,Windows Phone 8,Surface

    Read the article

  • Revisiting the Generations

    - by Row Henson
    I was asked earlier this year to contribute an article to the IHRIM publication – Workforce Solutions Review.  My topic focused on the reality of the Gen Y population 10 years after their entry into the workforce.  Below is an excerpt from that article: It seems like yesterday that we were all talking about the entry of the Gen Y'ers into the workforce and what a radical change that would have on how we attract, retain, motivate, reward, and engage this new, younger segment of the workforce.  We all heard and read that these youngsters would be more entrepreneurial than their predecessors – the Gen X'ers – who were said to be more loyal to their profession than their employer. And, we heard that these “youngsters” would certainly be far less loyal to their employers than the Baby Boomers or even earlier Traditionalists. It was also predicted that – at least for the developed parts of the world – they would be more interested in work/life balance than financial reward; they would need constant and immediate reinforcement and recognition and we would be lucky to have them in our employment for two to three years. And, to keep them longer than that we would need to promote them often so they would be continuously learning since their long-term (10-year) goal would be to own their own business or be an independent consultant.  Well, it occurred to me recently that the first of the Gen Y'ers are now in their early 30s and it is time to look back on some of these predictions. Many really believed the Gen Y'ers would enter the workforce with an attitude – expect everything to be easy for them – have their employers meet their demands or move to the next employer, and I believe that we can now say that, generally, has not been the case. Speaking from personal experience, I have mentored a number of Gen Y'ers and initially felt that with a 40-year career in Human Resources and Human Resources Technology – I could share a lot with them. I found out very quickly that I was learning at least as much from them! Some of the amazing attributes I found from these under-30s was their fearlessness, ease of which they were able to multi-task, amazing energy and great technical savvy. They were very comfortable with collaborating with colleagues from both inside the company and peers outside their organization to problem-solve quickly. Most were eager to learn and willing to work hard.  This brings me to the generation that will follow the Gen Y'ers – the Generation Z'ers – those born after 1998. We have come full circle. If we look at the Silent Generation or Traditionalists, we find a workforce that preceded the television and even very early telephones. We Baby Boomers (as I fall right squarely in this category) remembered the invention of the television and telephone – but laptop computers and personal digital assistants (PDAs) were a thing of “StarTrek” and other science fiction movies and publications. Certainly, the Gen X'ers and Gen Y'ers grew up with the comfort of these devices just as we did with calculators. But, what of those under the age of 10 – how will the workplace look in 15 more years and what type of workforce will be required to operate in the mobile, global, virtual world. I spoke to a friend recently who had her four-year-old granddaughter for a visit. She said she found her in the den in front of the TV trying to use her hand to get the screen to move! So, you see – we have come full circle. The under-70 Traditionalist grew up in a world without TV and the Generation Z'er may never remember the TV we knew just a few years ago. As with every generation – we spend much time generalizing on their characteristics. The most important thing to remember is every generation – just like every individual – is different. The important thing for those of us in Human Resources to remember is that one size doesn’t fit all. What motivates one employee to come to work for you and stay there and be productive is very different than what the next employee is looking for and the organization that can provide this fluidity and flexibility will be the survivor for generations to come. And, finally, just when we think we have it figured out, a multitude of external factors such as the economy, world politics, industries, and technologies we haven’t even thought about will come along and change those predictions. As I reach retirement age – I do so believing that our organizations are in good hands with the generations to follow – energetic, collaborative and capable of working hard while still understanding the need for balance at work, at home and in the community! Normal 0 false false false EN-US X-NONE X-NONE /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin:0in; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-fareast-font-family:"Times New Roman"; mso-fareast-theme-font:minor-fareast; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;}

    Read the article

  • How do I dig myself out of this DEEP hole? [closed]

    - by user74847
    I may be a bit bias in the way i word this but any opinions and suggestions are welcome. I should start by saying i have a MSc in CS and a degree in new media +6 years expereince and im probably around a middleweight developer. I started a web development company with my friend from uni a year ago, there was a 4 month gap in the middle where i went miles away work on a big project. Ive since returned and picked up where we left off. A year on though i find im still staying up til 5am and getting up at 9 sometimes 2-3 days without sleep. While i was away i was working 9-5 and struggling to keep up with doing stuff for my clients 8 hours ahead, after work, so things stagnated. We currently have about 12 active projects, with one other part time developer and a full time freelancer who is dealing with one of our major projects. I am solely responsible for concurrently developing 2 big sites similar to gumtree in functionality, at the same time as about 5-6+ small WordPress based 5-10page sites. a lot of the content isnt in yet or the client is delaying so i chop and change project every other day which does my head in. Is it reasonable to expect myself to remember the intricate details of each project when i come back to it a week later? and remember the details of a task which hasnt been written down? my business partner seems to think so. or am i just forgetful? Im particularly bad at estimating timescales which doesnt help, added to that a lot of the technologies im am using are new to me (a magento site took weeks to theme rather than days and was full of bugs, even after 1000's of google searches and hours reading forums) im still trying to learn and find the best CMS for us to use and getting my head around the likes of Bootstrap and jquery, Cpanel / Linux (we just got a blank vps for me to set up with no experience) even installing an SSL certificate caused everyone's mail clients to go down which was more stress for me to sort out. I find the pressure of the workload and timescales and trying to learn this stuff so fast is beginning to turn me against my career path. The fact that i never seem to get anything done really winds up my business partner and iv come to associate him with the stress and pain of the whole situation especially when I get berated or a look that says "oh you retard" when I forget something. Even today i spent hours learning how a particular themeforest theme worked with wordpress and how i could twist it to work for our partiuclar needs, on the surface had done no work, that triggered a 30 minute tirade of anger and stress and questioning what i had done from my business partner. had i taken too long to work on that? shoudl i have done it in 2 hours instead of 6? i told him i would take 2 hours. i was wrong. I feel like im running myself into the ground. My sleeping pattern has got so bad that when im working im half asleep and making mistakes, my eyes are constantly purple underneath, i literally fall asleep at my desk, its affecting my social life too, ive not slept more than lightly for the last year and grind through impossible code puzzles in my half sleep wich keeps me awake, when im already exhausted. plus the work is rushed and buggy when it does get done so drags on into the next project. I also procrastinate quite badly, pacing the livingroom, looking out the window when Im alone for three days straight in the flat and start to get cabin fever which means i do even less work and the negative feedback loop continues. I get told im the only one with the problem when i say that i cant work from home any more, and examples of other freelancers get brought up. an office wouldnt bring any extra cash in to the company but im convinced having that moving more than 2 meters away from my bed to go to "work" would get me working, at the moment i feel guilty like i should be working 24-7. It is important that we do all this work to raise enough cash to get our business to the next level but every month still feels like a struggle to pay the rent (there is about £20K coming in by Jan) and i have to borrow money from friends often to buy food or get a taxi to a meeting, so it is vital the money keeps coming in. (im also 20 mins late for nearly all meetings but thats a different issue) have you experienced anything similar? how can i deal with the issues ive raised? is it realistic to develop 10 sites at once? how can i improve my relationship with my business partner? do you struggle to work at home? how do you deal with that? i think if i dont get my life on track by feb i will seriously consider giving it all up, but that seems like such a waste. any ideas!!? i need help! Thanks.

    Read the article

  • IE9, LightSwitch Beta 2 and Zune HD: A Study in Risk Management?

    - by andrewbrust
    Photo by parl, 'Risk.’ Under Creative Commons Attribution-NonCommercial-NoDerivs License This has been a busy week for Microsoft, and for me as well.  On Monday, Microsoft launched Internet Explorer 9 at South by Southwest (SXSW) in Austin, TX.  That evening I flew from New York to Seattle.  On Tuesday morning, Microsoft launched Visual Studio LightSwitch, Beta 2 with a Go-Live license, in Redmond, and I had the privilege of speaking at the keynote presentation where the announcement was made.  Readers of this blog know I‘m a fan of LightSwitch, so I was happy to tell the app dev tools partners in the audience that I thought the LightSwitch extensions ecosystem represented a big opportunity – comparable to the opportunity when Visual Basic 1.0 was entering its final beta roughly 20 years ago.  On Tuesday evening, I flew back to New York (and wrote most of this post in-flight). Two busy, productive days.  But there was a caveat that impacts the accomplishments, because Monday was also the day reports surfaced from credible news agencies that Microsoft was discontinuing its dedicated Zune hardware efforts.  While the Zune brand, technology and service will continue to be a component of Windows Phone and a piece of the Xbox puzzle as well, speculation is that Microsoft will no longer be going toe-to-toe with iPod touch in the portable music player market. If we take all three of these developments together (even if one of them is based on speculation), two interesting conclusions can reasonably be drawn, one good and one less so. Microsoft is doubling down on technologies it finds strategic and de-emphasizing those that it does not.  HTML 5 and the Web are strategic, so here comes IE9, and it’s a very good browser.  Try it and see.  Silverlight is strategic too, as is SQL Server, Windows Azure and SQL Azure, so here comes Visual Studio LightSwitch Beta 2 and a license to deploy its apps to production.  Downloads of that product have exceeded Microsoft’s projections by more than 50%, and the company is even citing analyst firms’ figures covering the number of power-user developers that might use it. (I happen to think the product will be used by full-fledged developers as well, but that’s a separate discussion.) Windows Phone is strategic too…I wasn’t 100% positive of that before, but the Nokia agreement has made me confident.  Xbox as an entertainment appliance is also strategic.  Standalone music players are not strategic – and even if they were, selling them has been a losing battle for Microsoft.  So if Microsoft has consolidated the Zune content story and the ZunePass subscription into Xbox and Windows Phone, it would make sense, and would be a smart allocation of resources.  Essentially, it would be for the greater good. But it’s not all good.  In this scenario, Zune player customers would lose out.  Unless they wanted to switch to Windows Phone, and then use their phone’s battery for the portable media needs, they’re going to need a new platform.  They’re going to feel abandoned.  Even if Zune lives, there have been other such cul de sacs for customers.  Remember SPOT watches?  Live Spaces?  The original Live Mesh?  Microsoft discontinued each of these products.  The company is to be commended for cutting its losses, as admitting a loss isn’t easy.  But Redmond won’t be well-regarded by the victims of those decisions.  Instead, it gets black marks. What’s the answer?  I think it’s a bit like the 1980’s New York City “don’t block the box” gridlock rules: don’t enter an intersection unless you see a clear path through it.  If the light turns red and you’re blocking the perpendicular traffic, that’s your fault in judgment.  You get fined and get points on your license and you don’t get to shrug it off as beyond your control.  Accountability is key.  The same goes for Microsoft.  If it decides to enter a market, it should see a reasonable path through success in that market. Switching analogies, Microsoft shouldn’t make investments haphazardly, and it certainly shouldn’t ask investors to buy into a high-risk fund that is sold as safe and which offers only moderate returns.  People won’t continue to invest with a fund manager with a track record of over-zealous, imprudent, sub-prime investments.  The same is true on the product side for Microsoft, and not just with music players and geeky wrist watches.  It’s true of Web browsers, and line-of-business app dev tools, and smartphones, and cloud platforms and operating systems too.  When Microsoft is casual about its own risk, it raises risk for its customers, and weakens its reputation, market share and credibility.  That doesn’t mean all risk is bad, but it does mean no product team’s risk should be taken lightly. For mutual fund companies, it’s the CEO’s job to give his fund managers autonomy, but to make sure they’re conforming to a standard of rational risk management.  Because all those funds carry the same brand, and many of them serve the same investors. The same goes for Microsoft, its product portfolio, its executive ranks and its product managers.

    Read the article

  • Are there Negative Impact of opensource on commercial environment?

    - by Lostsoul
    I know this is not a good fit for Stack Overflow but wasn't sure if it was good for this site also so let me know if its not and I'll delete it. I love programming for fun but my role in my company is not technical. I have always loved the hacker culture and have been trying to drive that openness within my company from day one. My company has a very broad range of products and there are a few that are not strategic to us so I wanted to open source them (so we can focus on what makes us unique and open source the products that every firm has). Our industry does not open source(we would be the first firm to try this) and the feedback I'm getting from my management team is either 1) we'll destroy the industry or 2) all competitive commercial firms will unite against us and we'll be wiped out either way. I disagreed on both points because I think transparency will only grow our industry and our firm (think of McDonalds/KFC sharing their recipe openly, people may copy you, competitors may target you, but customers also may feel more comfortable buying your product. The value add, I believe, is in the delivery and experience not in hoarding the recipe). It's a big battle in my firm right now between the IT people who have seen the positive effects of sharing and the business people who think we'll be giving up everything (they prefer we sell parts we want to opensource, but in their defense this is standard when divesting something). Our industry is very secretive and I don't want to put anyone(even my competitors employees) out of a job yet I don't want to protect inefficient people by not being open with everyone. Yet I've seen so many amazing technologies created in interesting ways just by giving people freedom to take apart code and put it back together. I'm interested in hearing people's thoughts(doesn't have to be to my specific situation, I'm looking for the general lessons). Its a very stressful decision(but one I feel I must make) because if we go the open source route then there will be no going back. So what are your thoughts? Does open sourcing apply generally or is it only really applicable to software? Is it overall good for people in the industry and outside? I'm actually more interested in the negativeness effects(although positive are welcomed as well) Update: Long story short, although code is involved this is not so much about code as it is more about the idea of open sourcing. We are a mid sized quant hedge fund. We have some unique strategies but also have the standard long/short, arbitrage, global macro, etc.. funds. We are keeping the unique funds we have but the other stuff that everyone else has we are considering open sourcing (We have put in years of work & millions of dollars into. Our funds is pretty popular and our performance is either in first or second quartile so I suspect there will be interest but I don't know to what extent). The goal is not to get a community to work for us or anything, the goal is to let anyone who wants to tinker with it do so and create anything they want (it will not be part of our product line although I may unofficially allocate some our of staff's time to assist any community that grows). Although the code base is quite large, the value in this is the industry knowledge and approaches we have acquired (there are many books on artificial intelligence and quant trading but they are often years behind what's really going on as most firms forbid their staff from discussing what they are doing). We are also considering after we move our clients out to let the software still run and output the resulting portfolios for free as well so people can at least see the results(as long as we have avail. infrastructure). I think our main choices are, we can continue to fight for market share in a products that are becoming commoditized, we can shut the funds/products down(and keep the code but no one outside of our firm will ever learn from it) or we can open source it and let people do what they want. By open sourcing it, my idea is that the talent pool in the industry will grow because right now most of our hires have the same background (CFA, MBA, similar school, same experience,etc.. because we can't spend time training people so the industry 'standardizes' most people and thus the firms themselves start to look/act similar) but this may allow us to identify talent that has never been in the industry before (if we put a GPU license then as people learn from what we did, we can learn from what they do as well and maybe apply it to other areas of our firm). I see a lot of benefits but not many negatives while my peers at the company see the opposite.

    Read the article

  • cannt run phpunit tests on bash ubuntu 11.10

    - by Mohamad Elbialy
    i'm working with ubuntu 11.10 as root on my local machine, i've installed xampp 1.7.7 and i'm a newbie to ubuntu, while following a tutorial on sitepoint(http://www.sitepoint.com/getting-started-with-pear/) on how to install pear to use PhpUnit, i didnt notice it then, but it seems that i installed or used an existing php version 5.3.6 in CL to do that, also the pear installation was built on this version, while xampp being installed,i now have two versions of php,xampp's 5.3.8 and the 5.3.6, anyway, what i want to do is to use the existing xampp php version and build pear on that, to make all my work through xampp.so my questions are: how to uninstall the php V5.3.6 and it's pear installation? how to link the CL with the php ver. of xampp? how to build the next pear installation on the php ver. of xampp? i want all my web dev. work through xampp, is there anything else i need to unistall, to avoid this confusion? 4. i did the following in attampet to solve the problem: i wrote this in bash: gedit ~/.bashrc i added that to the end of ~/.bashrc file in attempt to change environment path: export PATH=/opt/lampp/bin:$PATH export PATH=/opt/lampp/lib/php:$PATH export PATH=/opt/lampp/lib/php/PHPUnit/pearcmd.php:$PATH i checked the php and pear version using 'php -v' and 'pear list' i got an ouput of: PHP 5.3.8 (cli) (built: Sep 19 2011 13:29:27) Copyright (c) 1997-2011 The PHP Group Zend Engine v2.3.0, Copyright (c) 1998-2011 Zend Technologies and for pear: Installed packages, channel pear.php.net: ========================================= Package Version State Archive_Tar 1.3.9 stable Console_Getopt 1.3.1 stable PEAR 1.9.4 stable PHPUnit 1.3.2 stable Structures_Graph 1.0.4 stable XML_Util 1.2.1 stable when i run: 'phpunit MessageTest.php': i get PHP Warning: require_once(PHP/CodeCoverage/Filter.php): failed to open stream: No such file or directory in /usr/bin/phpunit on line 38 Warning: require_once(PHP/CodeCoverage/Filter.php): failed to open stream: No such file or directory in /usr/bin/phpunit on line 38 PHP Fatal error: require_once(): Failed opening required 'PHP/CodeCoverage/Filter.php' (include_path='.:/php/includes:/opt/lampp/lib/php:/opt/lampp/bin:/opt/lampp/lib/php/PEAR') in /usr/bin/phpunit on line 38 5.i ran the following commands as reported in other questions as a solution to that error: sudo apt-get remove phpunit sudo pear channel-discover pear.phpunit.de sudo pear channel-discover pear.symfony-project.com sudo pear channel-discover components.ez.no sudo pear update-channels sudo pear upgrade-all sudo pear install --alldeps phpunit/PHPUnit sudo apt-get install phpunit and updated include path of php.ini to be: include_path = ".:/php/includes:/opt/lampp/lib/php:/opt/lampp/bin:/opt/lampp/lib/php/PEAR" the php file MessageTest.php: <?php require 'PHPUnit/Autoload.php'; $path = '/opt/lampp/lib/php/PEAR'; set_include_path(get_include_path() . PATH_SEPARATOR . $path); require_once 'PHPUnit/Framework/TestCase.php'; require_once 'Message/Controller/MessageController.php'; class MessageTest extends PHPUnit_Framework_TestCase{ private $message; public function setUp() { $this->message = new MessageController(); } public function tearDown() { } public function testRepeat(){ $yell = "Hello, Any One Out There?"; $this->message->repeat($yell); //sending a request $returnedMessage = $this->message->repeat($yell);//get a response $this->assertEquals($returnedMessage, $yell); } } ?> MessageController class from MessageController.php that i'm trying to test <?php class MessageController { public function actionHelloWorld() { echo 'helloWorld'; } public function repeat($inputString){ return $inputString; } } $msg = new MessageController; ?> I'm not using any PHP framework, i just made the files and classes sounds like it that's all. and still i get the same error: PHP Warning: require_once(PHP/CodeCoverage/Filter.php): failed to open stream: No such file or directory in /usr/bin/phpunit on line Warning: require_once(PHP/CodeCoverage/Filter.php): failed to open stream: No such file or directory in /usr/bin/phpunit on line 38 PHP Fatal error: require_once(): Failed opening required 'PHP/CodeCoverage/Filter.php' (include_path='.:/php/includes:/opt/lampp/lib/php:/opt/lampp/bin:/opt/lampp/lib/php/PEAR') in /usr/bin/phpunit on line 38 sure, i'm getting demanding here, i've wasted a lot of time and got really frustrated over this, hope you guys dont get bored reading through my questions, i appreciate your help thanks in advance, Mohamad elbialy

    Read the article

  • Network authentication + roaming home directory - which technology should I look into using?

    - by Brian
    I'm looking into software which provides a user with a single identity across multiple computers. That is, a user should have the same permissions on each computer, and the user should have access to all of his or her files (roaming home directory) on each computer. There seem to be many solutions for this general idea, but I'm trying to determine the best one for me. Here are some details along with requirements: The network of machines are Amazon EC2 instances running Ubuntu. We access the machines with SSH. Some machines on this LAN may have different uses, but I am only discussing machines for a certain use (running a multi-tenancy platform). The system will not necessarily have a constant amount of machines. We may have to permanently or temporarily alter the amount of machines running. This is the the reason why I'm looking into centralized authentication/storage. The implementation of this effect should be a secure one. We're unsure if users will have direct shell access, but their software will potentially be running (under restricted Linux user names, of course) on our systems, which is as good as direct shell access. Let's assume that their software could potentially be malicious for the sake of security. I have heard of several technologies/combinations to achieve my goal, but I'm unsure of the ramifications of each. An older ServerFault post recommended NFS & NIS, though the combination has security problems according to this old article by Symantec. The article suggests moving to NIS+, but, as it is old, this Wikipedia article has cited statements suggesting a trending away from NIS+ by Sun. The recommended replacement is another thing I have heard of... LDAP. It looks like LDAP can be used to save user information in a centralized location on a network. NFS would still need to be used to cover the 'roaming home folder' requirement, but I see references of them being used together. Since the Symantec article pointed out security problems in both NIS and NFS, is there software to replace NFS, or should I heed that article's suggestions for locking it down? I'm tending toward LDAP because another fundamental piece of our architecture, RabbitMQ, has a authentication/authorization plugin for LDAP. RabbitMQ will be accessible in a restricted manner to users on the system, so I would like to tie the security systems together if possible. Kerberos is another secure authentication protocol that I have heard of. I learned a bit about it some years ago in a cryptography class but don't remember much about it. I have seen suggestions online that it can be combined with LDAP in several ways. Is this necessary? What are the security risks of LDAP without Kerberos? I also remember Kerberos being used in another piece of software developed by Carnegie Mellon University... Andrew File System, or AFS. OpenAFS is available for use, though its setup seems a bit complicated. At my university, AFS provides both requirements... I can log in to any machine, and my "AFS folder" is always available (at least when I acquire an AFS token). Along with suggestions for which path I should look into, does anybody have any guides which were particularly helpful? As the bold text pointed out, LDAP looks to be the best choice, but I'm particularly interested in the implementation details (Keberos? NFS?) with respect to security.

    Read the article

  • Recommendations for distributed processing/distributed storage systems

    - by Eddie
    At my organization we have a processing and storage system spread across two dozen linux machines that handles over a petabyte of data. The system right now is very ad-hoc; processing automation and data management is handled by a collection of large perl programs on independent machines. I am looking at distributed processing and storage systems to make it easier to maintain, evenly distribute load and data with replication, and grow in disk space and compute power. The system needs to be able to handle millions of files, varying in size between 50 megabytes to 50 gigabytes. Once created, the files will not be appended to, only replaced completely if need be. The files need to be accessible via HTTP for customer download. Right now, processing is automated by perl scripts (that I have complete control over) which call a series of other programs (that I don't have control over because they are closed source) that essentially transforms one data set into another. No data mining happening here. Here is a quick list of things I am looking for: Reliability: These data must be accessible over HTTP about 99% of the time so I need something that does data replication across the cluster. Scalability: I want to be able to add more processing power and storage easily and rebalance the data on across the cluster. Distributed processing: Easy and automatic job scheduling and load balancing that fits with processing workflow I briefly described above. Data location awareness: Not strictly required but desirable. Since data and processing will be on the same set of nodes I would like the job scheduler to schedule jobs on or close to the node that the data is actually on to cut down on network traffic. Here is what I've looked at so far: Storage Management: GlusterFS: Looks really nice and easy to use but doesn't seem to have a way to figure out what node(s) a file actually resides on to supply as a hint to the job scheduler. GPFS: Seems like the gold standard of clustered filesystems. Meets most of my requirements except, like glusterfs, data location awareness. Ceph: Seems way to immature right now. Distributed processing: Sun Grid Engine: I have a lot of experience with this and it's relatively easy to use (once it is configured properly that is). But Oracle got its icy grip around it and it no longer seems very desirable. Both: Hadoop/HDFS: At first glance it looked like hadoop was perfect for my situation. Distributed storage and job scheduling and it was the only thing I found that would give me the data location awareness that I wanted. But I don't like the namename being a single point of failure. Also, I'm not really sure if the MapReduce paradigm fits the type of processing workflow that I have. It seems like you need to write all your software specifically for MapReduce instead of just using Hadoop as a generic job scheduler. OpenStack: I've done some reading on this but I'm having trouble deciding if it fits well with my problem or not. Does anyone have opinions or recommendations for technologies that would fit my problem well? Any suggestions or advise would be greatly appreciated. Thanks!

    Read the article

  • How to set up a centralized backup server with lots of offsite workstations, intermittent internet connectivity, and stubborn users?

    - by Zac B
    This might be an impossible question. Context: We have a bunch of computers across around 1000 users. We have a centralized office where 900 of the users work, most of the time. Most of the computers are laptops. They are very frequently coming on and off the network for hours at a time. Users often take their computers home and do lots of work from home. In addition, there are a handful of users who work elsewhere in the country, who are offline (no internet connection whatsoever) for more than half of the time they use their machines. All of the machines are Windows 7/XP. Problem: People are always losing data. One day someone accidentally deletes a bunch of files. The next day someone else installs a bad driver or tries to mess with something in system32 and needs a personal data backup/reinstall of Windows. Because of how many of our business operations are done without an internet connection, and how frequently computers come on- and offline, it's unfeasible to make users use network storage for all of their data. We tried giving them Dropboxes, and they stored their files elsewhere. We bought and deployed Altiris, and they uninstalled it and blamed us when they couldn't get files back that they accidentally deleted while they were offline and hadn't taken a backup in months. We tried teaching them backup best-practices, and using scheduled sync tools to upload things to the network drives, and they turned them off because they "looked like viruses". It doesn't help that many of these users are pretty high up in the business and are not amicable to any sort of "you need to do something regularly because we say so" solution. Question: Other than finding another job where IT is treated differently and users are willing to follow best practices, how would people recommend I implement a file backup solution that supports the following: Backs up to a centralized server over LAN or WAN whenever a network link becomes available, or on a schedule. Supports interrupted/resumed backups (and hopefully file-delta only backups), since connections to the network (WAN or LAN) are often slow and only open for half an hour or so. Supports relatively rapid, "I accidentally deleted the TPS reports! Oh no!" single-file recovery, ideally administered from the central backup server rather than the client PC. Supports local-to-local file delta backup on a schedule, so that users without a network connection for a few days can still retrieve accidental deletions or whatnot. Ideally, the local stored backups would be pushed up to the server whenever network link is available. Isn't configurable on the clients without certain credentials. Because the CFOs (who won't give up their admin rights on the domain) will disable it if they can. Backs up the entire hard drive. There are people who are self-righteous about storing things in C:\, or in the recycle bin, or in the C:\Windows dir (yes, I know). I'm fine integrating multiple products/solutions, or scripting different programs together myself (I'm a somewhat competent programmer), but I've been drawing a blank on where to start. Dropbox is folder-specific, Altiris doesn't cope with LAN outages or interrupted/resumed backups, Volume Shadow Copy is awesome for a local-to-local solution, but I don't know how to push days of stored shadow copies up to a server in a 2 hour window of network access. The company is fine with spending decent money on this, thousands (USD) on a server, and hundreds on clients, if necessary. I want to emphasize that this isn't a shopping list request. While I wish there was a program out there that did what I want, I've looked pretty hard, and not found anything that fits the bill. Instead, I'm hoping for ideas on where to start hacking things together from scratch/from different technologies to make something stable that works. Cheers!

    Read the article

  • Can't sync filesystem without reboot

    - by Fabio
    I'm having an issue with a linux server. Once a week the running mysql instance hangs and there is no way to fully stop it. If I kill it, it remains in zombie status and init does not reap its pid. The server is used for staging deployments and some internal tools, so it's not under heavy load. The only process constantly used id mysql and for this I think that it's the only process which suffer of this issue. I've searched system logs for errors and the only thing I found is this error (repeated a couple of times) in dmesg output: [706560.640085] INFO: task mysqld:31965 blocked for more than 120 seconds. [706560.640198] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. [706560.640312] mysqld D ffff88032fd93f40 0 31965 1 0x00000000 [706560.640317] ffff880242a27d18 0000000000000086 ffff88031a50dd00 ffff880242a27fd8 [706560.640321] ffff880242a27fd8 ffff880242a27fd8 ffff88031e549740 ffff88031a50dd00 [706560.640325] ffff88031a50dd00 ffff88032fd947f8 0000000000000002 ffffffff8112f250 [706560.640328] Call Trace: [706560.640338] [<ffffffff8112f250>] ? __lock_page+0x70/0x70 [706560.640344] [<ffffffff816cb1b9>] schedule+0x29/0x70 [706560.640347] [<ffffffff816cb28f>] io_schedule+0x8f/0xd0 [706560.640350] [<ffffffff8112f25e>] sleep_on_page+0xe/0x20 [706560.640353] [<ffffffff816c9900>] __wait_on_bit+0x60/0x90 [706560.640356] [<ffffffff8112f390>] wait_on_page_bit+0x80/0x90 [706560.640360] [<ffffffff8107dce0>] ? autoremove_wake_function+0x40/0x40 [706560.640363] [<ffffffff8112f891>] filemap_fdatawait_range+0x101/0x190 [706560.640366] [<ffffffff81130975>] filemap_write_and_wait_range+0x65/0x70 [706560.640371] [<ffffffff8122e441>] ext4_sync_file+0x71/0x320 [706560.640376] [<ffffffff811c3e6d>] do_fsync+0x5d/0x90 [706560.640379] [<ffffffff811c40d0>] sys_fsync+0x10/0x20 [706560.640383] [<ffffffff816d495d>] system_call_fastpath+0x1a/0x1f When this happens the only way to make everything working again is a full reboot, but in order to do that I'm forced to use this command after I've manually stopped all running processes echo b > /proc/sysrq-trigger otherwise normal reboot process hangs forever. I've tracked reboots script and I've found out that also the reboot process hangs on a sync call, this one in /etc/init.d/sendsigs (I'm on ubuntu) # Flush the kernel I/O buffer before we start to kill # processes, to make sure the IO of already stopped services to # not slow down the remaining processes to a point where they # are accidentily killed with SIGKILL because they did not # manage to shut down in time. sync I'm almost sure that the cause of this is an hardware issue (the RAID controller???) also because I've other two machines with the same hardware and software configuration and they don't suffer of this, but I can't find any hint in syslog or dmesg. I've also installed smartmontools and mcelog packages but none of them did report any issue. What can I do to track the cause of this issue? Today is happened again, here is the status of system after triggering a reboot init---console-kit-dae---64*[{console-kit-dae}] +-dbus-daemon +-mcelog +-mysqld---{mysqld} +-newrelic-daemon---newrelic-daemon---11*[{newrelic-daemon}] +-ntpd +-polkitd---{polkitd} +-python3 +-rpc.idmapd +-rpc.statd +-rpcbind +-sh---rc---S20sendsigs---sync +-smartd +-snmpd +-sshd---sshd---zsh---sudo---zsh---pstree +-sshd---sshd---zsh---sudo---zsh And here is the status of sync process # ps aux | grep sync root 3637 0.1 0.0 4352 372 ? D 05:53 0:00 sync i.e. Uninterruptible sleep... Hardware specs as reported by lshw I think the raid controller is a fake raid. I usually don't deal with hardware (and for the record I don't have physical access to it) description: Computer product: X7DBP () vendor: Supermicro version: 0123456789 serial: 0123456789 width: 64 bits capabilities: smbios-2.4 dmi-2.4 vsyscall32 configuration: administrator_password=disabled boot=normal frontpanel_password=unknown keyboard_password=unknown power-on_password=disabled uuid=53D19F64-D663-A017-8922-0030487C1FEE *-core description: Motherboard product: X7DBP vendor: Supermicro physical id: 0 version: PCB Version serial: 0123456789 *-firmware description: BIOS vendor: Phoenix Technologies LTD physical id: 0 version: 6.00 date: 05/29/2007 size: 106KiB capacity: 960KiB capabilities: pci pnp upgrade shadowing escd cdboot bootselect edd int13floppy2880 acpi usb ls120boot zipboot biosbootspecification *-storage description: RAID bus controller product: 631xESB/632xESB SATA RAID Controller vendor: Intel Corporation physical id: 1f.2 bus info: pci@0000:00:1f.2 version: 09 width: 32 bits clock: 66MHz capabilities: storage pm bus_master cap_list configuration: driver=ahci latency=0 resources: irq:19 ioport:18a0(size=8) ioport:1874(size=4) ioport:1878(size=8) ioport:1870(size=4) ioport:1880(size=32) memory:d8500400-d85007ff

    Read the article

  • redhat Apache fast-cgi selinux permissions

    - by Alejo JM
    My apache installation is running php as fastcgi, and the virtual hosts are pointing to /home/*/public_html. and the fastcgi are home/*/cgi-bin/php.fcgi the public_html setup with selinux was: /usr/sbin/setsebool -P httpd_enable_homedirs 1 chcon -R -t httpd_sys_content_t /home/someuser/public_html The owner and group are the user, for example the user "someuser": ls -all /home/someuser/cgi-bin/ drwxr-xr-x 2 someuser someuser 4096 Sep 7 13:14 . drwx--x--x 6 someuser someuser 4096 Sep 6 18:17 .. -rwxr-xr-x 1 someuser someuser 308 Sep 7 13:14 php.fcgi ls -all /home/someuser/public_html/ | greep info.php -rw-r--r-- 1 someuser someuser 24 Sep 3 16:24 info.php When is visits the site I get "Forbidden ..." and the log said: [Fri Sep 07 12:02:51 2012] [error] [client x.x.x.x] (13)Permission denied: access to /cgi-bin/php.fcgi/info.php denied My selinux conf is: SELINUX=enforcing SELINUXTYPE=targeted SETLOCALDEFS=0 So I kill Selinux (SELINUX=disabled), reboot the system and everything works !!!!! The problem is Selinux, I don't want disable Selinux. I trying this with no success: setsebool -P httpd_enable_cgi 1 chcon -t httpd_sys_script_exec_t /home/someuser/cgi-bin/php.fcgi chcon -R -t httpd_sys_content_t /home/someuser/cgi-bin Or maybe is better change Selinux SELINUX=enforcing to SELINUX=permissive And disable selinux for httpd ? (I think I better find the correct configuration) Thanks for any suggestion on this matter My environment: Red Hat Enterprise Linux Server release 5.8 (Tikanga) Server version: Apache/2.2.3 PHP 5.1.6 (cli) (built: Jun 22 2012 06:20:25) Copyright (c) 1997-2006 The PHP Group Zend Engine v2.1.0, Copyright (c) 1998-2006 Zend Technologies Some logs: ps -ZC httpd LABEL PID TTY TIME CMD system_u:system_r:httpd_t 2822 ? 00:00:00 httpd system_u:system_r:httpd_t 2823 ? 00:00:00 httpd system_u:system_r:httpd_t 2824 ? 00:00:00 httpd system_u:system_r:httpd_t 2825 ? 00:00:00 httpd system_u:system_r:httpd_t 2826 ? 00:00:00 httpd system_u:system_r:httpd_t 2836 ? 00:00:00 httpd system_u:system_r:httpd_t 2837 ? 00:00:00 httpd system_u:system_r:httpd_t 2838 ? 00:00:00 httpd system_u:system_r:httpd_t 2839 ? 00:00:00 httpd system_u:system_r:httpd_t 2840 ? 00:00:00 httpd getsebool -a | grep httpd allow_httpd_anon_write --> off allow_httpd_bugzilla_script_anon_write --> off allow_httpd_cvs_script_anon_write --> off allow_httpd_mod_auth_pam --> off allow_httpd_nagios_script_anon_write --> off allow_httpd_prewikka_script_anon_write --> off allow_httpd_squid_script_anon_write --> off allow_httpd_sys_script_anon_write --> off httpd_builtin_scripting --> on httpd_can_network_connect --> off httpd_can_network_connect_db --> off httpd_can_network_relay --> off httpd_can_sendmail --> on httpd_disable_trans --> off httpd_enable_cgi --> on httpd_enable_ftp_server --> off httpd_enable_homedirs --> on httpd_execmem --> off httpd_read_user_content --> off httpd_rotatelogs_disable_trans --> off httpd_setrlimit --> off httpd_ssi_exec --> off httpd_suexec_disable_trans --> off httpd_tty_comm --> on httpd_unified --> on httpd_use_cifs --> off httpd_use_nfs --> off

    Read the article

  • phpMyAdmin setup issues

    - by EquinoX
    I am trying to follow the tutorial here to setup the user and pass. It says there that "this section is only applicable if your MySQL server is running with --skip-show-database". First question is, how do I check if MySQl server is running with --skip-show-database? Is there any way I can access phpMyAdmin SQL query window without logging in? Otherwise I'd have to execute this SQL from command line. I am also getting this: Cannot load mcrypt extension. Please check your PHP configuration. I have added mcrypt.so to php.ini and doing the following command proves that I have it. [root@DT html]# rpm -qa | grep mcrypt mcrypt-2.6.8-1.el5 php-mcrypt-5.3.5-1.1.w5 libmcrypt-2.5.8-4.el5.centos [root@DT html]# php -v PHP 5.3.5 (cli) (built: Feb 19 2011 13:10:09) Copyright (c) 1997-2010 The PHP Group Zend Engine v2.3.0, Copyright (c) 1998-2010 Zend Technologies Now when I go to phpinfo() and search for mcrypt it can find it inside the Configure Command row ('--with-mcrypt=shared,/usr'). So, what to do next?. UPDATE: I didn't put extension=mcrypt.so in php.ini as it will complain the following: PHP Warning: Module 'mcrypt' already loaded in Unknown on line 0 Here's my nginx.conf: #user nobody; worker_processes 2; #error_log logs/error.log; #error_log logs/error.log notice; #error_log logs/error.log info; #pid logs/nginx.pid; events { worker_connections 1024; } http { include mime.types; default_type application/octet-stream; #log_format main '$remote_addr - $remote_user [$time_local] "$request" ' # '$status $body_bytes_sent "$http_referer" ' # '"$http_user_agent" "$http_x_forwarded_for"'; #access_log logs/access.log main; sendfile on; #tcp_nopush on; #keepalive_timeout 0; keepalive_timeout 65; gzip on; server { listen 80; root /usr/share/nginx/html; server_name localhost; #charset koi8-r; #access_log logs/host.access.log main; location / { #root html; index index.html index.htm; } #error_page 404 /404.html; # redirect server error pages to the static page /50x.html # error_page 500 502 503 504 /50x.html; location = /50x.html { #root html; } # proxy the PHP scripts to Apache listening on 127.0.0.1:80 # #location ~ \.php$ { # proxy_pass http://127.0.0.1; #} # pass the PHP scripts to FastCGI server listening on 127.0.0.1:9000 # location ~ \.php$ { #root /usr/local/nginx/html; fastcgi_pass 127.0.0.1:9000; fastcgi_index index.php; fastcgi_param SCRIPT_FILENAME /usr/share/nginx/html$fastcgi_script _name; include fastcgi_params; } # deny access to .htaccess files, if Apache's document root # concurs with nginx's one location ~ /\.ht { deny all; } } # another virtual host using mix of IP-, name-, and port-based configuration # #server { # listen 8000; # listen somename:8080; # server_name somename alias another.alias; # location / { # root html; # index index.html index.htm; # } #} # HTTPS server # #server { # listen 443; # server_name localhost; # ssl on; # ssl_certificate cert.pem; # ssl_certificate_key cert.key; # ssl_session_timeout 5m; # ssl_protocols SSLv2 SSLv3 TLSv1; # ssl_ciphers ALL:!ADH:!EXPORT56:RC4+RSA:+HIGH:+MEDIUM:+LOW:+SSLv2:+EXP; # ssl_prefer_server_ciphers on; # location / { # root html; # index index.html index.htm; # } #} }

    Read the article

  • IPv6: Should I have private addresses?

    - by AlReece45
    Right now, we have a rack of servers. Every server right now has at least 2 IP addresses, one for the public interface, another for the private. The servers that have SSL websites on them have more IP addresses. We also have virtual servers, that are configured similarly. Private Network The private range is currently just used for backups and monitoring. Its a gigabit port, the interface usage does not usually get very high. There are other technologies we're considering using that would use this port: iSCSI (implementations usually recommends dedicating an interface to it, which would be yet another IP network), VPN to get access to the private range (something I'd rather avoid) dedicated database servers LDAP centralized configuration (like puppet) centralized logging We don't have any private addresses in our DNS records (only public addresses). For our servers to utilize the correct IP address for the right interface (and not hard code the IP address) probably requires setting up a private DNS server (So now we add 2 different dns entries to 2 different systems). Public Network Our public range has a variety of services include web, email, and ftp. There is a hardware firewall between our network and the "public" network. We have (relatively secure) method to instruct the firewall to open and close administrative access (web interfaces, ssh, etc) for our current IP address. With either solution discussed, the host-based firewalls will be configured as well. The public network currently runs at a dedicated 20Mbps link. There are a couple of legacy servers with fast-ethernet ports, but they are scheduled for decommissioning. All of the other production boxes have at least 2 Gigabit Ethernet ports. The more traffic-heavy servers have 4-6 available (none is using more than the 2 Gigabit ports right now). IPv6 I want to get an IPv6 prefix from our ISP. So at least every "server" has at least one IPv6 interface. We'll still need to keep the IPv4 addressees up and available for legacy clients (web servers and email at the very least). We have two IP networks right now. Adding the public IPv6 address would make it three. Just use IPv6? I'm thinking about just dumping the private IPv4 range and using the IPv6 range as the primary means of all communications. If an interface starts reaching its capacity, utilize the newly free interfaces to create a trunk. It has the advantage that if either the public or private traffic needs to exceed 1Gbps. The traffic for each interface is already analyzed on a regular basis to predict future bandwidth use. In the rare instances where bandwidth unexpected peaks: utilize QoS to ensure traffic (like our limited SSH access) is prioritized correctly so the problem can be corrected (if possible, our WAN is the bottleneck right now). It also has the advantage of not needing to make an entry for every private address. We may have private DNS (or just LDAP), but it'll be much more limited in scope with less entries to duplicate. Summary I'm trying to make this network as "simple" as possible. At the same time, I want to make sure its reliable, upgradeable, scalable, and (eventually) redundant. Having one IPv6 network, and a legacy IPv4 network seems to be the best solution to me. Regarding using assigned IPv6 addresses for both networks, sharing the available bandwidth on one (more trunked if needed): Are there any technical disadvantages (limitations, buffers, scalability)? Are there any other security considerations (asides from firewalls mentioned above) to consider? Are there regulations or other security requirements (like PCI-DSS) that this doesn't meet? Is there typical software for setting up a Linux network that doesn't have IPv6 support yet? (logging, ldap, puppet) Some other thing I didn't consider?

    Read the article

  • Vista 64-bit, DISK BOOT FAILURE

    - by weka
    So I have this Acer Aspire AX3200-U3600A with Windows Vista (64-bit). Every night I turn it off and turn it back on in the morning. Around three weeks ago, I did a fresh factory reimage. Good as new. Then around two days ago, when I turned it on, I noticed it was running extremly slow. As in, it would often freeze up while I had multiple applications open when it usually never froze up. So I decided to restart my computer. Big mistake. My computer froze right after I clicked shut-down. I waited a while. Nothing. Waited some minutes. Nope. I decided to shut it down by pressing the power button. Here is where the problems begin. When I turned it back on, I saw the Windows logo and loading bar and then it loaded to black. I turned it off again forcefully by power button and then once more... then I got: AMD Data Change... Update New Data to DMI! then later the screen clears and I get: AHCI Option ROM BIOS Revision: 01.05.92 Date: 02-19-2008 Copyright (c) 2006-2008 Phoenix Technologies, LTD Port 01: Reset Port Error!! Port 02: then the screen clears again but this time, this loads from the bottom: Nvidia Boot Agent 249.0542 (copyright stuff... blah blah) PXE-E61: Media test failure, check cable. PXE-M0F: Exiting Nvidia Boot Agent DISK BOOT FAILURE, INSERT SYSTEM DISK AND PRESS ENTER. So I try to go into Safe Mode. Well, first of all it doesn't load as fast. After it loads disk.sys from windows/drivers, it will wait a while (2-3 mins) THEN load. However it loads the Acer eRecovery Management Tool. I have three options: Reset computer to factory default, Restore computer from user's backup, or Exit. However, the top two options are gray and disabled where as the Exit is in blue and definitely clickable. So obviously safe mode is not there... A strong thing to note: In the beginning when all of this started, I did a Boot Windows Normal from pressing f8 and I got to my desktop! It logged me in. I could see the icons on my files. However my desktop was extremely slow as in when I clicked on the Start menu, it would wait a while, then load up the menu with JUST the gradient, no text or icons... so as you can see... it saw my HDD? Also, before anyone says, I have NO USB plugged in. My mouse and keyboard are not USB inputs, I assure you. And this came without a recovery CD AND when I went in BIOS, to change the BOOT ORDER, I did NOT see a CD-ROM option. And when I tried pressing ALT+F10 to get into Acer eRecovery Management, the top two options were disabled as well. But sometimes on start-up, I get: Windows has encountered a problem communicating with a device connected to your computer. This error can be caused by unplugging a removable storage device such as an external USB drive while the device is in use, or by faulty hardware such as a hard drive or CD-ROM drive that is failing. Make sure any removeable storage is properly connected and then restart your computer. If you continue to receive this error message, contact the hardware manufacturer. Status: 0xc00000e9 Info: An unexpected I/O error has occured. Then I tried Last Known Good Configuration Settings, that gives me a BSOD. What should I do/

    Read the article

  • Trying to prevent Windows from hibernating/sleeping automatically

    - by user328821
    My Dell XPS 8700 (Win 7) suddenly began putting itself to sleep at 6pm daily, even if I'm typing. I don't know what caused this to occur, except possibly a windows update that took place in the middle of the night. I initially went into settings for power and saw 2 plans set up, one from Dell and the other window's Power saver plan. I set both to never for sleep and hibernate yet it still occurred. I have current drivers and a fairly new UPS that has software to set to shutdown only after power loss. Dell is of little help, can anyone point me in the right direction? I did do the powerdfg -energy program and came up with this: Power Efficiency Diagnostics Report Scan Time 2014-05-08T19:21:48Z Scan Duration 60 seconds System Manufacturer Dell Inc. System Product Name XPS 8700 BIOS Date 08/23/2013 BIOS Version A04 OS Build 7601 Platform Role PlatformRoleDesktop Plugged In true Process Count 115 Thread Count 1631 Report GUID {097caf99-039b-44c3-b154-d797bfbfdfcc} Analysis Results Errors Power Policy:Sleep timeout is disabled (Plugged In) The computer is not configured to automatically sleep after a period of inactivity. System Availability Requests:System Required Request The device or driver has made a request to prevent the system from automatically entering sleep. Requesting Driver Instance HDAUDIO\FUNC_01&VEN_10EC&DEV_0899&SUBSYS_102805B7&REV_1000\4&220b1bbc&0&0001 Requesting Driver Device Realtek High Definition Audio CPU Utilization:Processor utilization is high The average processor utilization during the trace was high. The system will consume less power when the average processor utilization is very low. Review processor utilization for individual processes to determine which applications and services contribute the most to total processor utilization. Average Utilization (%) 9.48 Warnings Platform Timer Resolution:Platform Timer Resolution The default platform timer resolution is 15.6ms (15625000ns) and should be used whenever the system is idle. If the timer resolution is increased, processor power management technologies may not be effective. The timer resolution may be increased due to multimedia playback or graphical animations. Current Timer Resolution (100ns units) 10000 Maximum Timer Period (100ns units) 156001 Platform Timer Resolution:Outstanding Kernel Timer Request A kernel component or device driver has requested a timer resolution smaller than the platform maximum timer resolution. Requested Period 10000 Request Count 2 Platform Timer Resolution:Outstanding Timer Request A program or service has requested a timer resolution smaller than the platform maximum timer resolution. Requested Period 10000 Requesting Process ID 8672 Requesting Process Path \Device\HarddiskVolume3\Program Files (x86)\Mozilla Firefox\firefox.exe Platform Timer Resolution:Outstanding Timer Request A program or service has requested a timer resolution smaller than the platform maximum timer resolution. Requested Period 100000 Requesting Process ID 1212 Requesting Process Path \Device\HarddiskVolume3\Windows\System32\svchost.exe Power Policy:802.11 Radio Power Policy is Maximum Performance (Plugged In) The current power policy for 802.11-compatible wireless network adapters is not configured to use low-power modes. CPU Utilization:Individual process with significant processor utilization. This process is responsible for a significant portion of the total processor utilization recorded during the trace. Process Name audiodg.exe PID 1304 Average Utilization (%) 4.73 Module Average Module Utilization (%) \Device\HarddiskVolume3\Windows\System32\msvcrt.dll 1.88 \Device\HarddiskVolume3\Windows\System32\MaxxAudioAPO5064.dll 1.77 \Device\HarddiskVolume3\Windows\System32\AudioEng.dll 0.80 CPU Utilization:Individual process with significant processor utilization. This process is responsible for a significant portion of the total processor utilization recorded during the trace. Process Name thunderbird.exe PID 6036 Average Utilization (%) 0.35 Module Average Module Utilization (%) \Device\HarddiskVolume3\Program Files (x86)\Mozilla Thunderbird\xul.dll 0.16 \Device\HarddiskVolume3\Program Files (x86)\Mozilla Thunderbird\mozjs.dll 0.05 \SystemRoot\System32\win32k.sys 0.03 CPU Utilization:Individual process with significant processor utilization. This process is responsible for a significant portion of the total processor utilization recorded during the trace. Process Name dwm.exe PID 1340 Average Utilization (%) 0.25 Module Average Module Utilization (%) \Device\HarddiskVolume3\Windows\System32\dwmcore.dll 0.08 \Device\HarddiskVolume3\Windows\System32\nvwgf2umx.dll 0.05 \SystemRoot\system32\ntoskrnl.exe 0.03 CPU Utilization:Individual process with significant processor utilization. This process is responsible for a significant portion of the total processor utilization recorded during the trace.

    Read the article

  • Computer science undergraduate project ideas

    - by Mehrdad Afshari
    Hopefully, I'm going to finish my undergraduate studies next semester and I'm thinking about the topic of my final project. And yes, I've read the questions with duplicate title. I'm asking this from a bit different viewpoint, so it's not an exact dupe. I've spent at least half of my life coding stuff in different languages and frameworks so I'm not looking at this project as a way to learn much about coding and preparing for real world apps or such. I've done lots of those already. But since I have to do it to complete my degree, I felt I should spend my time doing something useful instead of throwing the whole thing out. I'm planning to make it an open source project or a hosted Web app (depending on the type) if I can make a high quality thing out of it, so I decided to ask StackOverflow what could make a useful project. Situation I've plenty of freedom about the topic. They also require 30-40 pages of text describing the project. I have the following points in mind (the more satisfied, the better): Something useful for software development Something that benefits the community Having academic value is great Shouldn't take more than a month of development (I know I'm lazy). Shouldn't be related to advanced theoretical stuff (soft computing, fuzzy logic, neural networks, ...). I've been a business-oriented software developer. It should be software oriented. While I love hacking microcontrollers and other fun embedded electronic things, I'm not really good at soldering and things like that. I'm leaning toward a Web application (think StackOverflow, PasteBin, NerdDinner, things like those). Technology It's probably going to be done in .NET (C#, F#) and Windows platform. If I really like the project (cool low level hacking), I might actually slip to C/C++. But really, C# is what I'm efficient at. Ideas Programming language, parsing and compiler related stuff: Designing a domain specific programming language and compiler Templating language compiled to C# or IL Database tools and related code generation stuff Web related technologies: ASP.NET MVC View engine doing something cool (don't know what exactly...) Specific-purpose, small, fast ASP.NET-based Web framework Applications: Visual Studio plugin to integrate with Bazaar (it's too much work, I think). ASP.NET based, jQuery-powered issue tracker (and possibly, project lifecycle management as a whole - poor man's TFS) Others: Something related to GPGPU Looking forward for great ideas! Unfortunately, I can't help on a currently existing project. I need to start my own to prevent further problems (as it's an undergrad project, nevertheless).

    Read the article

  • Interesting issue with WCF wsHttpBinding through a Firewall

    - by Marko
    I have a web application deployed in an internet hosting provider. This web application consumes a WCF Service deployed at an IIS server located at my company’s application server, in order to have data access to the company’s database, the network guys allowed me to expose this WCF service through a firewall for security reasons. A diagram would look like this. [Hosted page] --- (Internet) --- |Firewall <Public IP>:<Port-X >| --- [IIS with WCF Service <Comp. Network Ip>:<Port-Y>] link text I also wanted to use wsHttpBinding to take advantage of its security features, and encrypt sensible information. After trying it out I get the following error: Exception Details: System.ServiceModel.EndpointNotFoundException: The message with To 'http://<IP>:<Port>/service/WCFService.svc' cannot be processed at the receiver, due to an AddressFilter mismatch at the EndpointDispatcher. Check that the sender and receiver's EndpointAddresses agree. Doing some research I found out that wsHttpBinding uses WS-Addressing standards, and reading about this standard I learned that the SOAP header is enhanced to include tags like ‘MessageID’, ‘ReplyTo’, ‘Action’ and ‘To’. So I’m guessing that, because the client application endpoint specifies the Firewall IP address and Port, and the service replies with its internal network address which is different from the Firewall’s IP, then WS-Addressing fires the above message. Which I think it’s a very good security measure, but it’s not quite useful in my scenario. Quoting the WS-Addressing standard submission (http://www.w3.org/Submission/ws-addressing/) "Due to the range of network technologies currently in wide-spread use (e.g., NAT, DHCP, firewalls), many deployments cannot assign a meaningful global URI to a given endpoint. To allow these ‘anonymous’ endpoints to initiate message exchange patterns and receive replies, WS-Addressing defines the following well-known URI for use by endpoints that cannot have a stable, resolvable URI. http://schemas.xmlsoap.org/ws/2004/08/addressing/role/anonymous" HOW can I configure my wsHttpBinding Endpoint to address my Firewall’s IP and to ignore or bypass the address specified in the ‘To’ WS-Addressing tag in the SOAP message header? Or do I have to change something in my service endpoint configuration? Help and guidance will be much appreciated. Marko. P.S.: While I find any solution to this, I’m using basicHttpBinding with absolutely no problem of course.

    Read the article

  • Application Architecture using WCF and System.AddIn

    - by Silverhalide
    A little background -- we're designing an application that uses a client/server architecture consisting of: A server which loads server-side modules, potentially developed by other teams. A client which loads corresponding client-side modules (also potentially developed by those other teams; each client module corresponds with a server module). The client side communicates with the server side for general coordination, and as well as module specific tasks. (At this point, I think that means client talks to server, client modules talk to server modules.) Environment is .NET 3.5, and client side is WPF. The deployment scenario introduces the potential to upgrade the server, any server-side module, the client, and any client-side module independently. However, being able to "work" using mismatched versions is required. I'm therefore concerned about versioning issues. My thinking so far: A Windows Service for the server. Using System.AddIn for the server to load and communicate with the server modules will give us the greatest flexibility in terms of version compatability between server and server modules. The server and each server module vend WCF services for communication to the client side; communication between the server and a server module, or between two server modules use the AddIn contracts. (One advantage of this is that a module can expose a different interface within the server and outside it.) Similarly, the client uses System.AddIn to find, load, and communicate with the client modules. Client communications with client modules is via the AddIn interface; communications from the client and from client modules to the server side are via WCF. For maximum resilience, each module will run in a separate app-domain. In general, the system has modest performance requirements, so marshalling and crossing process boundaries is not expected to be a performance concern. (Performance requirement is basically summed up by: don't get in the way of the other parts of the system not described here.) My questions are around the idea of having two different communication and versioning models to work with which will be an added burden on our developers. System.AddIn seems quite powerful, but also a little unwieldly. (I'm also unsure of Microsoft's commitment to it in the future.) On the other hand, I'm not thrilled with WCF's versioning capabilities. I have a feeling that it would be possible to implement the System.AddIn view/adapter/contract system within WCF, but being fairly new to both technologies, I would have no idea of where to start. So... Am I on the right track here? Am I doing this the hard way? Are there gotchas I need to be aware of on this road? Thanks.

    Read the article

  • Revisiting .NET, but what should I focus on?

    - by Wayne M
    After about a two-year hiatus, I'm brushing up on my .NET skills to find a .NET job (my previous two positions have very little development, or development using legacy technologies, so apart from a few very minor apps I have not touched .NET in close to two years). I'm aware of things like ASP.NET MVC, and I have previously read on things like NHibernate and DI/IOC, albeit I have yet to use them apart from very trivial "Hello World" type applications. I have a subscription to Rob Conery's Tekpub website and occasionally watch these videos when I have free time. My concern is this: I don't live in a very technical area. I would be surprised if any but the most tech-savvy companies have heard of, let alone use, ASP.NET MVC, NHibernate (or even LINQ/EF), or know about IoC. I would be willing to bet a large sum of money that 95% of the possible jobs I could obtain will use the following: Visual Source Safe, if any VCS at all ASP.NET 2.0 Webforms (3.5 if lucky) Raw ADO.NET on top of a very thin implementation of the Gateway pattern Stored Procedures in the database for most CRUD operations Gratuitous use of code-behind, with a Service layer if I'm lucky If I were extremely lucky, I might find a shop that has heard of ORMs and either uses one, or has wrote their own data abstraction. Also if I were lucky, the company would be using Model-View-Presenter. In light of this I'm not sure what I should focus on learning. Personally, I would prefer to be using the latest stuff - ASP.NET MVC, NHibernate, jQuery, WCF etc. Reality says I should go back to the basics, since it looks like most potential opportunities aren't going to be anywhere near the cutting edge, or anywhere close to it. And, as much as I would like to find a position and start to show the other developers the benefits, in my past experience this has usually resulted in my being fired for "not being a team player" and doing things the bad old way. So, I am curious how you would approach a situation like this? What should I focus on, in order to A) Reaquaint myself with .NET, and B) Prepare myself to obtain a .NET job again that is more than likely going to use techniques that I and most other knowledgeable developers will scoff at?

    Read the article

  • Server side Xforms form validation and integration into ASP.NET

    - by Nigel
    I have recently been investigating methods of creating web-based forms for an ASP.NET web application that can be edited and managed at runtime. For example an administrator might wish to add a new validation rule or a new set of fields. The holy grail would provide a means of specifying a form along with (potentially very complex) arbitrary validation rules, and allocation of data sources for each field. The specification would then be used to update the deployed form in the web application which would then validate submissions both on the client side and on the server side. My investigations led me to Xforms and a number of technologies that support it. One solution appears to be IBM Lotus Forms, but this requires a very large investment in terms of infrastructure, which makes it infeasible, although the forms designer may be useful as a stand-alone tool for creating the forms. I have also discounted browser plug-ins as the form must be publicly visible and cross-browser compliant. I have noticed that there are numerous javascript libraries that provide client side implementations given an Xforms schema. These would provide a partial solution but server side validation is still a requirement. Another option seems to involve the use of server side solutions such as the Java application Orbeon. Orbeon provides a tool for specifying the forms (although not as rich as Lotus Forms Designer), but the most interesting point is that it can translate an XForms schema into an XHTML form complete with validation. The fact that it is written in Java is not a big problem if it is possible to integrate with the existing ASP.NET application. So my question is whether anyone has done this before. It sounds like a problem that should have been solved but is inherently very complex. It seems possible to use an off-the-shelf tool to design the form and export it to an Xforms schema and xhtml form, and it seems possible to take that xforms schema and form and publish it using a client side library. What seems to be difficult is providing a means of validating the form submission on the server side and integrating the process nicely with .NET (although it seems the .NET community doesn't involve themselves with XForms; please correct me if I'm wrong on this count). I would be more than happy if a product provided something simple like a web service that could validate a submission against a schema. Maybe Orbeon does this but I'd be grateful if somebody in the know could point me in the right direction before I research it further. Many thanks.

    Read the article

< Previous Page | 114 115 116 117 118 119 120 121 122 123 124 125  | Next Page >