Search Results

Search found 20155 results on 807 pages for 'things'.

Page 118/807 | < Previous Page | 114 115 116 117 118 119 120 121 122 123 124 125  | Next Page >

• Using pre-made patch cables on a punch down block?

  - by Trevor Harrison

  I need to add a 24 port switch to my wiring closet. In the (distant) past, I usually just punched each port of the switch to a 110 block on the wall (using hand-made cables), and cross connect between that and the 110 block that has the runs to each workstation. To save time, I'm thinking of buying 12 pre-made drop cables, cutting them in half (so 24 single ended cables), and punching those to my 110 block. The things I'm worried about are wire type (ie. solid vs. strands) and color scheme. I really don't know if they use different wire types (still?), but I remember that being an issue at one point. Can anyone comment on this? (I definitely won't feel comfortable trying to punch stranded wiring on my 110 block) Also, picking up a random pre-built cable I had laying around, I noticed that the color scheme used didn't appear to be T568B, but T568A, which would clash with the rest of my wall. Anyone know of an online source that specifies these things? I've looked at www.cablesforless.com (which does have nicer prices) and www.cablestogo.com (which seem stupid expensive) so far. Cables For Less doesn't specify wiring scheme, Cables To Go does specify T568B. Both seem to specify stranded wires instead of solid.

  Read the article

• Using bind (named) as a public proxy server

  - by TrentDavis

  We have a Python DNS server that does a bunch of stuff to figure out values it should return for various DNS records. This works nicely, however as it is Python, the performance under high load won't be great. What I would like to do is have a "proxy" bind server sit in front of it to return results to the public internet. This will cache the results (typically 15 minutes, some records are a few seconds), so the load on the Python server will be greatly reduced as it will only see one look up per domain (only about 100 domains) every 15 minutes. The data in these domains changes a lot, so using a master won't work as it will constantly be changing. I have something setup that looked like it would work great (using a forwarder for the zone), and tested it with dig etc, all going great. However when we went to go live with it, things weren't working, and we figured out that named is not setting the "Authoritative" bit (fair enough, it is a forwarder). So my question is, can we tell bind to set the Authoritative bit for forwarded domains? I have looked at all the doco I can find, and can't find anything about doing things this way. Most of the doco about using it as a proxy if for a LAN to the internet. Ideally I would like to use bind as it is there and installed (CentOS 5 servers). But at a pinch we could look at a different name server to do the work if it just can't be done with bind. Thanks.

  Read the article

• Is Windows Server 2008R2 NAP solution for NAC (endpoint security) valuable enough to be worth the hassles?

  - by Warren P

  I'm learning about Windows Server 2008 R2's NAP features. I understand what network access control (NAC) is and what role NAP plays in that, but I would like to know what limitations and problems it has, that people wish they knew before they rolled it out. Secondly, I'd like to know if anyone has had success rolling it out in a mid-size (multi-city corporate network with around 15 servers, 200 desktops) environment with most (99%) Windows XP SP3 and newer Windows clients (Vista, and Win7). Did it work with your anti-virus? (I'm guessing NAP works well with the big name anti-virus products, but we're using Trend micro.). Let's assume that the servers are all Windows Server 2008 R2. Our VPNs are cisco stuff, and have their own NAC features. Has NAP actually benefitted your organization, and was it wise to roll it out, or is it yet another in the long list of things that Windows Server 2008 R2 does, but that if you do move your servers up to it, you're probably not going to want to use. In what particular ways might the built-in NAP solution be the best one, and in what particular ways might no solution at all (the status quo pre-NAP) or a third-party endpoint security or NAC solution be considered a better fit? I found an article where a panel of security experts in 2007 say NAC is maybe "not worth it". Are things better now in 2010 with Win Server 2008 R2?

  Read the article

• nginx inserting extra characters in Multi-status reply body

  - by user125011

  Here's the setup. I've got one server running apache/php hosting ownCloud. Among other things, I'm using to do CardDAV contact syncing. In order to make things work with my domain I have an nginx server running on the frontend as a reverse-proxy to the ownCloud server. My nginx config is as follows: server { listen 80; server_name cloud.mydomain.com; location / { proxy_set_header X-Forwarded-Host cloud.mydomain.com; proxy_set_header X-Forwarded-Proto http; proxy_set_header X-Forwarded-For $remote_addr; client_max_body_size 0; proxy_redirect off; proxy_pass http://server; } } The problem is that when my phone does a PROPFIND on the server, nginx adds extra characters to the content body that throw the phone off. Specifically, it prepends d611\r\n at the front of the body and appends 0\r\n\r\n to the end of the content. (I got this from wireshark.) It also re-chunks the result. How do I get nginx to send the original content as-is?

  Read the article

• Communicating via Command Mode with IBM HS22 IMM via AMM

  - by MikeyB

  On previous model blades that contained a BMC, I was able to communicate from our external management station via pass-through commands to the BMC to do things such as power blades on/off, set VPD parameters, reboot the BMC, etc. Now on the HS22, a bunch of things happen differently. For example, we can no longer use the same pass-through commands to write VPD information pages and have them persist across reboots of the IMM - it looks as though those VPD pages are populated from information contained in the IMM. How do we use the Advanced Settings Utility from an external host to communicate with HS22 IMMs? Alternatively, what TCP Command Mode commands do we need to send to the AMM to communicate with the IMM? For our purposes, we specifically cannot communicate with the IMM from the blade itself. Specific example: When I send a pass-thru IPMI command via the AMM to the blade BMC to write information (such as MTM, Serial) into VPD page 0x10, it persists on blades with a BMC (HS21 for example). I can send the same IPMI command to write data to the VPD page on the HS22, however it does not persist across reboots of the IMM. What IPMI commands do I need to send to the IMM? What IPMI commands are asu sending when it sets the MTM & Serial?

  Read the article

• "ImportError: No module named flask" - Trouble with nginx + uWSGI + Flask in a virtualenv setup

  - by vjk2005

  I got nginx + uWSGI running on localhost inside a virtualenv with a simple hello world program, but I get this error when I replace the hello world with a simple Flask app: File "./wsgi_configuration_module.py", line 1, in <module> from flask import Flask ImportError: No module named flask unable to load app mountpoint Here's the flask app (wsgi_configuration_module.py): from flask import Flask application = Flask(__name__) @application.route("/") def hello(): return "hello world" if __name__ == "__main__": application.run() uWSGI config (app_conf.xml): <uwsgi> <socket>127.0.0.1:9001</socket> <chdir>/srv/www/labs/application</chdir> <pythonpath>/srv/www</pythonpath> <module>wsgi_configuration_module</module> <callable>application</callable> <no-site>true</no-site> </uwsgi> nginx config: server { listen 80; server_name localhost; access_log /srv/www/labs/logs/access.log; error_log /srv/www/labs/logs/error.log; location / { include uwsgi_params; uwsgi_pass 127.0.0.1:9001; } location /static { root /srv/www/labs/public_html/static/; index index.html index.htm; } } virtualenv stored in ~/virtual_env with Python 2.7 + nginx + uWSGI + Flask installed in a virtualenv called basic. Things I've tried to solve this: set the --home (-H) option to my virtualenv folder ~/virtual_env while running uWSGI. Other info: I have the same setup working outside of a virtualenv. Things go wrong only when I try to replicate the setup inside of a virtualenv. Where have I gone wrong?

  Read the article

• Removing SCIM input method as default from gnome terminal

  - by Mark

  Hello - I am recently back into the Linux world after about a 10 year absence. While I can find my way around most things, terminals and desktop managers are different than I remember. One of the biggest problems that I am encountering today is that when running a gnome terminal (this is Suse 10.0 enterprise), I'm getting behavior in the window that I don't want. Specifically, when I type, my typing is underlined as if something is trying to spell check my window. Further, it seems as if when running vi or less, my keystrokes are only processed by these apps when I hit 'return'. I.e. if I'm running less and want to go back a page, I'll hit b, but nothing happens until I hit 'return'. I seem to have tracked this down to the 'input method". Right clicking in the Gnome terminal allows me to set my input method to one of a dozen values. It seems that currently, it's set to "SCIM Input Method". If I then select 'default' or 'X Input Method', apps (i.e. things like less, vi, and even the bash shell) behave as I would expect. Can someone tell me a) what is this SCIM input method b) how can I make it so that it is not the default? I've poked around various configuration files in my home directory as well as in /etc, but I can't see to find how this is set. I guess as a final question, can I just get rid of SCIM? Or is that tied into the window manager somehow? I do appreciate any clarifications that I can get. Thanks.

  Read the article

• Using NginX and Apache alongside for both static and dynamic files

  - by faridv

  Background: I've searched a lot and found these useful threads about using of Apache or NginX for static or dynamic files. But they are old (mostly about 1 or 2 years ago) and I think both webservers, specifically Nginx has had important changes in performance and usage. So I think take another look on these issue cannot be that bad. Nginx (for static files) and Apache (for dynamic content)? nginx better than apache for dynamic content? [closed] Apache or NGINX for PHP? Nginx as reverse proxy to Apache with only dynamic content? My question: I have a PHP web application with lots of dynamic files and lots of static contents (videos, images etc.) and it's currently running on a CentOS 6 server and Apache 2.2 since 2 months ago. In past few days, number of our site visitors have gained so fast and I just thought if this number continues to increase with current ratio, we need to change many things (web server, application, etc.) to prevent failures. Because of hardware limitations that we are facing, I thought that it's best for us to start with web server. Should I start with something else? Should I try to increase performance of my PHP application and forget about web server for now? (even if gonna take a long time!) Because of huge usage of .htaccess files (for redirection, rewrites, etc.), I think it's gonna be painful to migrate to NginX as default web server or maybe only for dynamic files. Does this mean that I can't even use Nginx as reverse proxy? I'm not sure latest stable version of NginX and PHP-FPM have a better performance over my current Apache and my limitations (too many things) won't let me to give it a try. Which one is doing better currently? What will I lose by migrating to Nginx? To make it short, what should I do?

  Read the article

• "Learning" Linux

  - by Strider

  I've been interested in computers for a long time and have fiddled with a lot of stuff which includes Linux. I started out with Red Hat when I was young (around 13) and lost all data, converting a FAT32 drive to something else. Later it was Knoppix which was really helpful in recovery and such. Then, it was Ubuntu. Also, I fiddled with Arch for some time, but, it breaks too often for my liking (maybe, I should have been more careful). Anyway, currently I use Ubuntu 9.04. I want to dig deeper into the Linux world now. I want to learn how things work and use the terminal more. I am a programmer as well, so, it will help a lot. So, the thing I wanted to ask were: Good books to learn and understand Linux Good habits to use Linux more efficiently. Good tools about which I should know. Amount of time you set aside to learn about new things each day. As a programmer, how do you setup and use Linux efficiently. Long list. I will be grateful to the answerers.

  Read the article

• How do I SSH tunnel using PuTTY or SecureCRT through gateway/proxy to development server?

  - by DAE51D

  We have some unix boxes setup in a way that to get to the development box via ssh, you have to ssh into a 'user@jumpoff' box first. There is no direct connection allowed on 'dev' via ssh from anywhere but 'jumpoff'. Furthermore, only key exchange is allowed on both servers. And you always login to the development box as 'build@dev'. It's painful to always do that hopping. I know this can be done with SOCKS or a Tunnel or something... I have setup a FreeBSD VM and I can get things to work awesome using unix ssh tools. Basically all I do is make sure my vm's ~/.ssh/id_rsa.pub key is on both jumpoff and dev and use this ~/.ssh/config file: # Development Server Host ext-dev # this must be a resolvable name for "dev" from Jumpoff Hostname 1.2.3.4 User build IdentityFile ~/.ssh/id_rsa # The Jumpoff Server Host ext Hostname 1.1.1.1 User daevid Port 22 IdentityFile ~/.ssh/id_rsa # This must come below all of the above Host ext-* ProxyCommand ssh ext nc $(echo '%h'|cut -d- -f2-) 22 Then I just simply type "ssh ext-dev" and I'm in like Flynn. The problem is I can't get this same thing to work using either PuTTY or SecureCRT -- and to be honest I've not found any tutorials that really walk me through it. I see many on setting up some kind of proxy tunnel for Firefox, but it doesn't seem to be the same concept. I've been messing with various trial and error most all day and nothing has worked (obviously) and I'm at the end of my ssh knowledge and Google searching. I found this link which seemed to be perfect, but it doesn't work for me. The "Master" connects fine, but the "client" portion doesn't connect. It tells me, the remote system refused the connection. http://www.vandyke.com/support/tips/socksproxy.html I've got the VM, PuTTY and SecureCRT all using the same public/private key pairs to make things consistent and easier to debug. Does anyone have a straight up example of how to do this in Windows?

  Read the article

• Does any economically-feasible publicly available software compare audio files to determine if they are dupes?

  - by drachenstern

  In the vein of this question http://unix.stackexchange.com/questions/3037/is-there-an-easy-way-to-replace-duplicate-files-with-hardlinks is there any software that will automatically parse a library of my songs and find the ones that really are duplicates that one can be eliminated? Here's an example: My brother used to be a huge fan of remixing CDs. He would take all of his favorite tracks and put them on one. Then he would use my computer to read them in. So now I have like 6 copies of Californication on my HDD, and they're all a few bytes difference overall. I have hundreds of songs in my library like this. I want to trim them down to having uniques. They don't all have correct ID3 tags, so figuring out that Untitled(74).mp3 is the same as californication.mp3 is the same as whowrotethis.mp3 is tricky. I do NOT want to consider a concert album and a studio album rip to be the same (if I just did artist/title matching I would end up with this scenario, which doesn't work for me). I use Windows (pick your platform) and will be getting an OSX box later in the year. I'll run Linux if that's what it takes to get it organized. I have unprotected AAC and mp3 files. Bonus points for messing with WAV or MIDI and bonus points for converting from those into MP3 (I can always use Audacity and LAME to convert later if I know they match or to convert ahead of time if that will make things easier). Are there any suggestions, or do I need to goto Programmers or SO and build a list of requirements for comparing these things and write the software myself?

  Read the article

• Elevating UAC via .bat file?

  - by jslaker

  Pretty straightforward one that I'm having trouble finding an answer to. serverfault previously helped me with finding a way to automate Windows updates without using WSUS. It's working fantastically, but to run it over the network, you have to first mount a shared drive. That's pretty simple XP since you just mount the drive and run the updater. On Vista and W7, though, this all has to be done with elevated privileges to work correctly. The UAC account can't see network drives mounted by the regular user, so in order to get everything working, I have to mount the share via net use from an escalated shell. I'd like to automate mounting this share and launching the updater via a simple .bat file. I could probably just instruct everybody to right click "Run as Administrator" on the .bat file, but I'd like to keep things as simple as possible and have the .bat automatically prompt the user to escalate their privileges. Since these computers don't belong to us, I can't count on anything like Powershell being installed, so that rules any solution along those lines out and pretty much have to rely on things that would be included in an RTM Vista install. I'm hoping I'm mostly missing something obvious here. :)

  Read the article

• Best CPUs for speeding up compiling times of C++ w/ DistGCC

  - by Jay

  I'm putting together a distributed build farm with DistGCC to speed up our teams compile times and just looking for thoughts on which processors to use in the hosts. Are we going to get a noticeable decrease in time using 8 cores vs. 4-hyperthreaded cores? Big difference in time between i7 and Xeon? etc, etc. Just need advice from people who've put together kick-a build clusters. We've got a majority of the normal things to speed up builds in place (pre-compiled headers, ccache, local gigabit connections between them, tons of ram, etc) so please just give advice on the best processor to use. And money is a factor, but anythings doable if the performance increase is noticeable. Thanks. Jay EDIT: Although any advice IS welcome, please refrain from "Do this first" posts as we're not planning on skimping on things like SSD, maxed out RAM, etc. My personal system is a iMac Quad-core i5 with 8GB of RAM. When I build our project locally, my processor floats around 99-100% a majority of the time, which makes me assume it is a bottleneck, even if you made everything else faster. My ram on the other hand doesn't even get close to maxing out. It's also worth noting that I did research this, however every discussion I could find was primarily for gaming machines, which is obviously a different beast in usage. These machines won't even have monitors or anything but integrated graphics since they have one purpose: Build freakin fast. (hopefully)

  Read the article

• Best CPUs for speeding up compiling times of C++ w/ DistGCC

  - by Jay

  I'm putting together a distributed build farm with DistGCC to speed up our teams compile times and just looking for thoughts on which processors to use in the hosts. Are we going to get a noticeable decrease in time using 8 cores vs. 4-hyperthreaded cores? Big difference in time between i7 and Xeon? etc, etc. Just need advice from people who've put together kick-a build clusters. We've got a majority of the normal things to speed up builds in place (pre-compiled headers, ccache, local gigabit connections between them, tons of ram, etc) so please just give advice on the best processor to use. And money is a factor, but anythings doable if the performance increase is noticeable. Thanks. Jay EDIT: Although any advice IS welcome, please refrain from "Do this first" posts as we're not planning on skimping on things like SSD, maxed out RAM, etc. My personal system is a iMac Quad-core i5 with 8GB of RAM. When I build our project locally, my processor floats around 99-100% a majority of the time, which makes me assume it is a bottleneck, even if you made everything else faster. My ram on the other hand doesn't even get close to maxing out. It's also worth noting that I did research this, however every discussion I could find was primarily for gaming machines, which is obviously a different beast in usage. These machines won't even have monitors or anything but integrated graphics since they have one purpose: Build freakin fast. (hopefully)

  Read the article

• Best CPUs for speeding up compiling times of C++ w/ DistGCC

  - by Jay

  I'm putting together a distributed build farm with DistGCC to speed up our teams compile times and just looking for thoughts on which processors to use in the hosts. Are we going to get a noticeable decrease in time using 8 cores vs. 4-hyperthreaded cores? Big difference in time between i7 and Xeon? etc, etc. Just need advice from people who've put together kick-a build clusters. We've got a majority of the normal things to speed up builds in place (pre-compiled headers, ccache, local gigabit connections between them, tons of ram, etc) so please just give advice on the best processor to use. And money is a factor, but anythings doable if the performance increase is noticeable. Thanks. Jay EDIT: Although any advice IS welcome, please refrain from "Do this first" posts as we're not planning on skimping on things like SSD, maxed out RAM, etc. My personal system is a iMac Quad-core i5 with 8GB of RAM. When I build our project locally, my processor floats around 99-100% a majority of the time, which makes me assume it is a bottleneck, even if you made everything else faster. My ram on the other hand doesn't even get close to maxing out. It's also worth noting that I did research this, however every discussion I could find was primarily for gaming machines, which is obviously a different beast in usage. These machines won't even have monitors or anything but integrated graphics since they have one purpose: Build freakin fast. (hopefully)

  Read the article

• Windows XP - Power surge on hub port

  - by Swift-Tuttle

  Since last few weeks I constantly get this error, as status bar balloon: Power Surge on Hub Port - A USB device has exceeded the power limits of its hub port. Due to this now I am unable to access any USB devices properly, they get disconnected intermittently. I did quite a few things to resolve this problem, firstly obviously through the Windows help. I even tried all the things told on the Microsoft website(which essentially says is to check and update the driver) but in vain. One suggestion, I found when I google'd was to disable the USB2 controller through the Device Manager and since at every startup the System configuration comes up complaining that it has been changed etc.(On that same site it is mentioned to ignore this message.) But after everything I still cant solve this problem. Any help is much appreciated. The system is installed with Windows XP service Pack 3 and all the updates till last month. Please let me know if any other hardware info is required. **UPDATE** My laptop is about 5 years old now, its an HP with Celeron 1.4G processor. Windows XP SP3 installed. All latest windows updates installed. 2 USB ports available. BIOS is HP 68DTD ver F.0A Do I need to update my BIOS from somewhere ? or is this a hardware problem altogether?

  Read the article

• Replacing local home server with VPS: Suggestions?

  - by CamronBute

  So right now, I'm running an old box with a 2TB HDD in it. I use this as a file server for the home network, as well as a box for downloading large files which are synced via Dropbox. Lots of other tinkering things, too. Basically, I'm sick of paying extra for the power and having to worry about drive failures and whatnot. I'd rather get a remote server, let someone else manage it and provide access from the Internet. So, I've been looking for a Windows VPS that would give me access to install things and tinker, and I'm having a problem finding a host that offers more than 100GB of hard drive space. If they do offer a package with 100GB of storage, everything else is waaayyyy more than what I actually need. The idea is to create a permanent VPN connection from the cloud server to my home network to provide a transparent solution so I'm not having to go to lengths to transfer files or whatnot. I think a VPS solution will allow me to do this. I would like 1TB of storage space, minimum 100Mbps Internet connection, minimum 250GB bandwidth, admin access. Anyone have anything? Or am I being unreasonable? If I am, why?

  Read the article

• Windows Server 2003 SBS domain in multiple sites

  - by E3 Group

  We have about 25 employees in our current office and are looking to open up another office in another capital city housing about 15 employees. In our current office, we are running a domain hosted by a 2003 SBS server and I've been tasked by the boss to expand our infrastructure to the new office in the cheapest way possible (cheapest way in the short run that is, because my boss doesn't think more than 6 months ahead). So I'm looking to get a second hand server and have it run Server 2003 Std with exchange server 2003. These are the things that it needs to do: Replicate shared folders that are hosted in the parent LAN. Deliver emails hosted in the parent Exchange Server Somehow link up with the parent domain controller and push the AD to the remote site I'm pretty sure 3 is impossible but the DC would be available if a VPN connection is present, right? On that note, would I be looking at hardware VPN connections? I'm not sure how to deploy the new site as this is my first time doing it and i'm making it especially difficult for myself, seeing as the AD and DC is on an SBS server. Would I first start by establishing a VPN connection and then joining the new server to the domain? Will things 'just work' if I install exchange onto the new server and point outlooks to it? and how would I be able to replicate shared folders?

  Read the article

• Temporary boot problem after thunder storm - likely causes?

  - by alastairs

  The village where I live was sat under a thunder cloud for most of Friday, and we suffered a few power fluctuations (specifically, what seemed to be split-second outages). When I got back home from work, I found that my PCs had shut down during one of these outages. When I went to boot one of them back up, I couldn't get anything to display on screen, nor did the boot seem to complete correctly. I tried a number of things - unplugging different bits of hardware, swapping graphics adaptors, etc. - to no avail. I thought I was looking at a fried motherboard or CPU. Power seemed to be distributed correctly to the peripherals (the drives all appeared to be working) so I figured it couldn't be the PSU. Eventually I unplugged it from the mains and left it overnight (approx 12hrs unplugged). I tried it again this morning, and it booted up correctly. Woo-hoo! I have all my equipment protected by surge-protected power strips, so I don't think a spike caused these problems. Obviously it has something to do with the power fluctuations, and maybe the PSU in the problem machine got itself confused somehow. The questions are, for future reference and to help people with similar problems: What are the likely causes of the boot failure I experienced? Is a UPS a simple and cost-effective solution, or might other things help prevent this happening in future? What UPS can you recommend (my budget is limited)?

  Read the article

• Turning Google Apps mail inbox into Support Ticket System

  - by Saif Bechan

  I have an account at Google apps and most of my email is done trough Gmail. Now I just manually respond to support email. I was wondering if there is an easy way using filters and auto responders to create a support ticket system. I think something like this would be great, but is it possible: Gmail has to make a unique ID for every email that comes in. After that all the other incoming mails should be grouped using that unique ID and not grouped by email. Something like that, or are there things I am not taking into account. I really don't want to use separate software for this, because I think with some small configurations this can do the trick quite well. Or are there some free apps on the marketplace that do this already. I have searched for this but cannot find any. Sorry if this is not an SF question. I really didn't know which is the best fit for this question. This can be migrated to anywhere if someone things it would be answered better there.

  Read the article

• DNS zone file SPF configuration to support sending mail from multiple servers and gmail

  - by Tauren

  I want to configure SPF on a domain to allow mail to be sent from: the x.com website server (x.com and www.x.com - both at same IP) it's MX servers (smtp.x.com, mx.x.com, mail.x.com) another server that isn't listed as an MX server (somehost.x.com) via gmail using an account that has authenticated use of [email protected] Will this zone file work? If not, what are the problems with it? $ttl 38400 @ IN SOA ns1.x.com. hostmaster.x.com. ( 201003092 ; serial 8H ; refresh 15M ; retry 1W ; expire 1H ) ; minimum @ NS ns1.x.com. @ NS ns2.x.com. @ MX 10 mx.x.com. @ MX 20 smtp.x.com. @ MX 30 mailhost.x.com. ; SPF records @ IN TXT "v=spf1 a mx a:somehost.x.com include:_spf.google.com ~all" mx IN TXT "v=spf1 a -all" smtp IN TXT "v=spf1 a -all" mailhost IN TXT "v=spf1 a -all" Questions: Is _spf.google.com the right thing to include for gmail.com, or is it only for Google Hosted Apps? If only for Google Apps, what should I include to send from gmail.com? If mail shouldn't be sent from anywhere else, is it safe to use -all instead of ~all? Does it make sense to add specific SPF records for each of the mail servers? Any other problems with the zone file? I want to confirm these things before making changes to my zone file. The file has SPF configured basically the same now, just without google.com and somehost, but I want to make sure I won't break things when I change it.

  Read the article

• Site to Site VPN problem, connection succesful data only oneway?

  - by Charles

  To start things off, I'm not the actual Administrator for the VPN Server, but he is also at a loss so I thought I'd ask it here. I know it's a Cisco ASA Firewall/VPN. I have a router that connects to the Cisco VPN server, it does so succesfully. I can ping everything within the remote network and from the remote network into my own. I've been able to SSH into a remote server over VPN as well, it all seems to work; until there's some more data returned. A quick example would be an internal webserver. The default homepage simply redirects, so only sends back HTTP headers with a "Location:". I receive this on my computer, but when I request the actual page then (which isn't that big) I don't get a response at all - it just stalls. And it does this for other services as well, for example SSH. I can do a couple of things while connected, but if there's more than xx output it seems to do nothing. The connection remains active throughout all of this. Has anyone ever experienced anything like this before / know what the problem might be? Another user who has a site-to-site connection with this VPN using the -exact same setup- has no problems, the only difference is that I have around 200ms ping to the VPN server/network because of a very long distance (other continent).

  Read the article

• Recover mysql database - mysqldump gives "table <tablename> doesn't exist (1146)"

  - by Matthew

  Backstory Ubuntu died (wouldn't boot) and I couldn't fix it. I booted a live cd to recover the important stuff and saved it to my NAS. One of the things I backed up was /var/lib/mysql. Reinstalled with Linux Mint because I was on Ubuntu 10.0.4 this was a good opportunity to try a new distro (and I don't like Unity). Now I want to recover my old mediawiki, so I shut down mysql daemon, cp -R /media/NAS/Backup/mysql/mediawiki@002d1_19_1 /var/lib/mysql/, set file ownership and permissions correctly, and start mysql back up. Problem Now I'm trying to export the database so I can restore the database, but when I execute the mysqldump I get an error: $ mysqldump -u mediawikiuser -p mediawiki-1_19_1 -c | gzip -9 > wiki.2012-11-15.sql.gz Enter password: mysqldump: Got error: 1146: Table 'mediawiki-1_19_1.archive' doesn't exist when using LOCK TABLES Things I've tried I tried using --skip-lock-tables but I get this: Error: Couldn't read status information for table archive () mysqldump: Couldn't execute 'show create table `archive`': Table 'mediawiki-1_19_1.archive' doesn't exist (1146) I tried logging in to mysql and I can list the tables that should be there, but trying to describe or select from them errors out the same way as the dump: mysql> show tables; +----------------------------+ | Tables_in_mediawiki-1_19_1 | +----------------------------+ | archive | | category | | categorylinks | ... | user_properties | | valid_tag | | watchlist | +----------------------------+ 49 rows in set (0.00 sec) mysql> describe archive; ERROR 1146 (42S02): Table 'mediawiki-1_19_1.archive' doesn't exist I believe mediawiki was installed using innodb and binary data. Am I screwed or is there a way to recover this?

  Read the article

• Make isolinux 4.0.3 chainload itself in VMWare

  - by chainloader

  I have a bootable iso which boots into isolinux 4.0.3 and I want to make it chainload itself (my actual goal is to chainload isolinux.bin v4.0.1-debian, which should start up the Ubuntu10.10 Live CD, but for now I just want to make it chainload itself). I can't get isolinux to chainload any isolinux.bin, no matter what version. It either freezes or shows a "checksum error" message. I'm using VMWare to test the iso. Things I have tried: .com32 /boot/isolinux/chain.c32 /boot/isolinux/isolinux-debug.bin (chainload self) this shows Loading the boot file... Booting... ISOLINUX 4.03 2010-10-22 Copyright (C) 1994-2010 H. Peter Anvin et al isolinux: Starting up, DL = 9F isolinux: Loaded spec packet OK, drive = 9F isolinux: Main image LBA = 53F00100 ...and the machine freezes. Then I've tried this (chainload GRUB4DOS 0.4.5b) chainloader /boot/isolinux/isolinux-debug.bin Result: Error 13: Invalid or unsupported executable format Next try: (chainload GRUB4DOS 0.4.5b) chainloader --force /boot/isolinux/isolinux-debug.bin boot Result: ISOLINUX 4.03 2010-10-22 Copyright (C) 1994-2010 H. Peter Anvin et al isolinux: Starting up, DL = 9F isolinux: Loaded spec packet OK, drive = 9F isolinux: No boot info table, assuming single session disk... isolinux: Spec packet missing LBA information, trying to wing it... isolinux: Main image LBA = 00000686 isolinux: Image checksum error, sorry... Boot failed: press a key to retry... I have tried other things, but all of them failed miserably. Any suggestions?

  Read the article

• How is Apache still working?

  - by PJ

  Recently, I decided to set up a local development environment for my work projects. I'm a PHP developer, with just enough knowledge of Linux and Apache to break things mightily. To get the local environment looking like my work environment, I had to upgrade PHP. When I did, Apache wouldn't restart. I decided I wanted to start fresh (this is where things went wrong) and that I'd reinstall Apache and PHP using MacPorts. So, I went through and tried to delete all the Apache files. Yup. I ran locate apache2 and deleted any folders that looked important. (I know, I know) Then I did a /usr/libexec/locate.updatedb to make sure everything was up to date. I even restarted my machine, just to make sure. The issue is, http://localhost still works. As does an alias I set up, http://butler. Shouldn't they not work? Now that I'm this far in, are there any tips for how to completely remove Apache so I can start over? Worst case, I have a timemachine backup, so I can always just restore that... Thanks in advance.

  Read the article

< Previous Page | 114 115 116 117 118 119 120 121 122 123 124 125  | Next Page >