Search Results

Search found 14598 results on 584 pages for 'address'.

Page 119/584 | < Previous Page | 115 116 117 118 119 120 121 122 123 124 125 126  | Next Page >

• Can't ping host from vmware guest using bridged networking

  - by user199421

  Host is Windows 7 Guest is Ubuntu 11.04 Network adapter is wireless I can ping other computers on the network but not the host. No firewall are involved. Sniffing the traffic with wireshark it looks like both the host and the guest are using the same MAC address. My guest simply doesn't receive a reply when asking for 192.168.1.101 (the host) My router has no problem giving both of them different IP addresses but maybe duplicate MAC address is the problem? It seems logical that both will have the same MAC address (from the host point of view) but it strange that there is no work around for this because otherwise I don't see how the host and guess are supposed to communicate.

  Read the article

• Davicom Semiconductor, Inc. 21x4x DEC-Tulip not detected by Wireshark but IP operational

  - by deepsix86

  Recently flipped to Ubuntu 11.10 on a Dell 4300 (Intel). Getting IP address and no issues (ping/surf) but Wireshark unable to detect eth0 interface. I see references in forums to blacklist tulip but looks like I am running dmfe. Not sure if the blacklist is required and where to go from here. Maybe Driver update? Got a little lost looking in that area. Some h/w details below (IP/MAC/HOSTNAME removed) Linux xxxxxx 3.0.0-17-generic #30-Ubuntu SMP Thu Mar 8 17:34:21 UTC 2012 i686 i686 i386 GNU/Linux network-admin (HOSTS TAB) does not list eth0, only loopback and bunch of IPv6 interfaces ifconfig eth0 Link encap:Ethernet HWaddr xxxxxxxx inet addr:192.168.x.xx Bcast:192.168.2.255 Mask:255.255.255.0 inet6 addr: xxxxxxxxxxx 64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:36662 errors:0 dropped:1 overruns:0 frame:0 TX packets:24975 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:42115779 (42.1 MB) TX bytes:3056435 (3.0 MB) Interrupt:18 Base address:0xe800 lspci 02:09.0 Ethernet controller: Davicom Semiconductor, Inc. 21x4x DEC-Tulip compatible 10/100 Ethernet (rev 31) Subsystem: Device 4554:434e Flags: bus master, medium devsel, latency 64, IRQ 18 I/O ports at e800 [size=256] Memory at fe1ffc00 (32-bit, non-prefetchable) [size=256] Expansion ROM at fe200000 [disabled] [size=256K] Capabilities: [50] Power Management version 2 Kernel driver in use: dmfe Kernel modules: dmfe hwinfo --netcard 20: PCI 209.0: 0200 Ethernet controller [Created at pci.318] Unique ID: rBUF.0NgK5ZS9c0D Parent ID: 6NW+.siohrLUzzI4 SysFS ID: /devices/pci0000:00/0000:00:1e.0/0000:02:09.0 SysFS BusID: 0000:02:09.0 Hardware Class: network Model: "Davicom 21x4x DEC-Tulip compatible 10/100 Ethernet" Vendor: pci 0x1282 "Davicom Semiconductor, Inc." Device: pci 0x9102 "21x4x DEC-Tulip compatible 10/100 Ethernet" SubVendor: pci 0x4554 SubDevice: pci 0x434e Revision: 0x31 Driver: "dmfe" Driver Modules: "dmfe" Device File: eth0 I/O Ports: 0xe800-0xe8ff (rw) Memory Range: 0xfe1ffc00-0xfe1ffcff (rw,non-prefetchable) Memory Range: 0xfe200000-0xfe23ffff (ro,non-prefetchable,disabled) IRQ: 18 (61379 events) HW Address: 00:08:a1:01:35:70 Link detected: yes Module Alias: "pci:v00001282d00009102sv00004554sd0000434Ebc02sc00i00" Driver Info #0: Driver Status: dmfe is active Driver Activation Cmd: "modprobe dmfe" Config Status: cfg=new, avail=yes, need=no, active=unknown Attached to: #11 (PCI bridge)

  Read the article

• Setup LAN to serve webpages and voip and access to the web site from inside LAN with domain name

  - by Mauricio Arias

  I'd like to know if it will work: I have my domain and I´m serving a webpage in a nginx to the internet, but if I type my domain in my laptop inside LAN I access to my modem/router configuration, I cannot access to the web server unless I type the IP address. I would like to add a Bind server after the modem/router - (port forward, ports 80 and 5060), if the request is www.mydomain.com bind should resolve the nginx IP address and serve it, and if it is a voip request should address to the voip server and if I'd like to access to the website from inside LAN I'd like to type mydomain.com. Could I do it with this configuration? Do I need something else? Thanks in advace!

  Read the article

• Parse an XML file

  - by karan@dotnet

  The following code shows a simple method of parsing through an XML file/string. We can get the parent name, child name, attributes etc from the XML. The namespace System.Xml would be the only additional namespace that we would be using. string myXMl = "<Employees>" + "<Employee ID='1' Name='John Mayer'" + "Address='12th Street'" + "City='New York' Zip='10004'>" + "</Employee>" + "</Employees>"; XmlDocument xDoc = new XmlDocument();xDoc.LoadXml(myXMl);XmlNodeList xNodeList = xDoc.SelectNodes("Employees/child::node()");foreach (XmlNode xNode in xNodeList){ if (xNode.Name == "Employee") { string ID = xNode.Attributes["ID"].Value; //Outputs: 1 string Name = xNode.Attributes["Name"].Value;//Outputs: John Mayer string Address = xNode.Attributes["Address"].Value;//Outputs: 12th Street string City = xNode.Attributes["City"].Value;//Outputs: New York string Zip = xNode.Attributes["Zip"].Value; //Outputs: 10004 }} Lets look at another XML: string myXMl = "<root>" + "<parent1>..some data</parent1>" + "<parent2>" + "<Child1 id='1' name='Adam'>data1</Child1>" + "<Child2 id='2' name='Stanley'>data2</Child2>" + "</parent2>" + "</root>"; XmlDocument xDoc = new XmlDocument();xDoc.LoadXml(myXMl);XmlNodeList xNodeList = xDoc.SelectNodes("root/child::node()"); //Traverse the entire XML nodes.foreach (XmlNode xNode in xNodeList) { //Looks for any particular nodes if (xNode.Name == "parent1") { //some traversing.... } if (xNode.Name == "parent2") { //If the parent node has child nodes then //traverse the child nodes foreach (XmlNode xNode1 in xNode.ChildNodes) { string childNodeName = xNode1.Name; //Ouputs: Child1 string childNodeData = xNode1.InnerText; //Outputs: data1 //Loop through each attribute of the child nodes foreach (XmlAttribute xAtt in xNode1.Attributes) { string attrName = xAtt.Name; //Outputs: id string attrValue = xAtt.Value; //Outputs: 1 } } }}  

  Read the article

• Extract reply to addresses from all emails in an outlook folder

  - by RodH257

  I've got to send a bulk email out to a bunch of people in reply to emails they sent me. I've got all the original emails stored in a single outlook folder. I want to extract all of the reply-to addresses from the emails in that folder so I can send an email to all of them. http://thetechieguy.wordpress.com/2008/04/22/extracting-email-address-from-outlook-2007-folder/ shows you how to export the FROM address of these emails, however a large amount of them came from a web service that sends emails 'on behalf of' the person I'm trying to mail to. So I need the reply-to address, and the export wizard doesn't do that. Does anyone have a tip on how to do this? This is Outlook 2007 on Exchange 2010.

  Read the article

• ifcfg-eth* on CentOS 6.x, but for IPv6 only?

  - by Ray Hoffman

  Could someone kindly provide a skeleton ifcfg-eth0:[X] for creating an alias with a IPv6 address and no IPv4 address? Or, alternatively, what's the IPv6 equivalent of this: in /etc/sysconfig/network-scripts/ifcfg-eth0:1 DEVICE=eth0:1 ONBOOT=yes BOOTPROTO=static IPADDR=42.69.66.66 NETMASK=255.255.255.0 Or does this not even make sense in IPv6 space? I know that I can use, for example: IPV6INIT=yes IPV6ADDR=2600:4200::6900:6666:dead:beef But then do I need to specify that there is no IPv4 address associated with this alias? If so, how? And do I need to also specify the IPV6_DEFAULTGW? Or can it piggyback on the eth0 (unaliased) gateway, which is specifed, like with IPv4 aliases? EDIT: Answered my own question! The easiest way to accomplish this seems to be not to create an alias as with IPV4, but to specify, for example, IPV6ADDR_SECONDARIES=2600:4200::6900:6666:dead:beef on the script for the base interface, e.g. ifcfg-eth0.

  Read the article

• nTop RRD file architecture

  - by Seanny123

  I have a gig of nTop RRD files and I would like to start graphing them with rrdtool (but not with nTop, since I'm hoping to do this with a separate backup of the database as workaround to the impossibility of limiting the RRD files by size), but I don't know how the files are structured. I've tried reading the RRD documentation from SourceForge and the nTop FAQ, but I'm not finding the information I need. Does anyone know of any documentation I should be looking at or how the files are structured? Here https://dl.dropbox.com/u/669437/file%20structure.png is a screenshot of the file structure. At first I thought it was organized by IP address (so the rrd files for address 1.1.2.3 would be stored in folder 1-1-2-3 or even the reverse order), but that doesn't seem to be the case. It isn't organized by MAC address either, although some hosts are saved that way. Any help would be appreciated.

  Read the article

• NLB 2 Windows Server 2003 Servers

  - by Paul Hinett

  I need to configure windows NLB on 2 dedicated servers I have. My main machine has been running for some time, with several domain names pointing to the servers primary IP address. Both servers have 2 NIC's installed, and both have several secondary public IP addresses available if needed? What IP address would I use for the cluster IP, does this IP need to be added to the IP list of both public NIC's ip address list? What IP addresses do I use for the host's dedicated IP? Please help, this is driving me nuts...i've taken down the server twice on accident today! Thank you in advance!

  Read the article

• Apache port forwarding with ZTE ZXV10 W300 router (provider specific firmware)

  - by dannote

  I'm trying to configure port forwarding for Apache 2.2 installed on Windows XP SP3 with ZTE ZXV10 W300 router. The computer has a static IP 192.168.1.2. Port forwarding is configured as following: Enable true Name Apache Protocol TCP (also tried TCP and UPD) WAN Host Start IP Address empty WAN Host End IP Address empty WAN Connection stream WAN Start Port 8080 WAN End Port 8080 LAN Host IP Address 192.168.1.2 LAN Host Start Port 8080 LAN Host End Port 8080 Port 8080 is open for both TCP and UPD in Windows Brandmauer. Apache configuration: Listen 192.168.1.2:8080 Router Firmware: Hardware Version V1.0.01 Software Version V8.0.02T03_CFA Boot Loader Version V1.1.2 The provider is COMSTAR. I'm not sure but it's said they flash routers with modified firmware. I have also tried to set up Bitcomet port forwarding on port 13514 and failed.

  Read the article

• Sharepoint Document Library not receiving emails

  - by ria

  I have created a sharepoint document library which is email enabled. However when i send email to the designated email address from anywhere, i dont receive the email & attachment in the list. I have done some R&D and i hv found that in order to receive email from anywhere i have to expose my DNS of the sharepoint site to the outside world. Now i dont know whether it applies to the email address designated to me in the Active directory profile as well (my company domain email address). How to test that this email reception is working in the document library? I have tried sending an email from the sharepoint site and it works fine so the SMTP settings are correctly done.

  Read the article

• How to use semantic markup and Google Places to assist in local search SEO?

  - by ElHaix

  In this article, adding additional localized markup is supposed to help your site's SEO. ie. <div itemscope itemtype="http://data-vocabulary.org/Organization"> <span itemprop="name">Search Engine People</span> <span itemprop="address" itemscope itemtype="http://data-vocabulary.org/Address"> <span itemprop="street-address">100 Westney Road South Unit 200, Building E</span> <span itemprop="locality">Ajax</span>, <span itemprop="region">ON</span> <span itemprop="country-name">Canada</span> <span itemprop="postal-code">L1S 7H3</span> </div> What about a site that contains valid localized results, where the actual business location is not relevant. For example, a site with valid local results from San Francisco, CA and Phoenix, AZ. Should these tags be added to the localized results, and has anyone got any experience with how much adding these tags have improved results? In terms of Google Places, however, they seem to ask for the business' actual physical location. Is there a way to use Google Places in the aforementioned example to assist in SEO?

  Read the article

• VMWare Fusion - Cannot communicate between Host Mac and Virtual Mac running on same machine [migrated]

  - by Jeff Gold

  I'm running a "virtual" Mac OS machine on a Mac running VMWare Fusion. The Virtual Mac is setup with Bridged Networking, and has its own separate IP address. The outside world can connect to either the Mac itself or the virtual Mac via their respective IP addresses just fine, this works great! The problem... the Mac itself cannot connect to the virtual Mac's IP address, nor can the virtual Mac connect to the real Mac's IP address. Some things I've read mention something about enabling VMCI, but I have no idea how to do this, or if this is even the correct solution. Any suggestions?

  Read the article

• Watchguard firebox: public IP addresses behind firewall with as much usable IP addresses as possible

  - by martinezpt

  Our ISP assigned us 16 public IP addresses that we want to assign to hosts behind a Watchguard firebox x750e. The IP addresses are: x.x.x.176/28 of which x.x.x.177 is the gateway. The hosts will be running software that needs to be directly assigned the public IP address so 1:1 NAT is not an option. I found this document that gives examples on how to assign public IP addresses to hosts behind the firewall, using an optional interface: http://www.watchguard.com/help/configuration-examples/public_IP_behind_XTM_configuration_example_(en-US).pdf However, I can't implement scenario 1 as it won't allow me to use the same subnet on both interfaces. As for scenario 2, splitting the address range into 2 subnets will decrease the usable hosts on the optional interface to 5 (8 - network - broadcast - optional interface ip). I'm convinced that there must be a better way to address this problem and maximize the number of usable IP addresses but I'm not very familiar with this specific firewall. Are there any suggestions on how to keep the hosts behind the firewall with public IP addresses while maximizing the usable IP addresses? thanks

  Read the article

• Problem with tomcat and getLocalHost exception

  - by xain

  I'm running a Linux server named S1 in a "cloud" server, and when tomcat 6.0.24 starts, I get the exception: org.apache.catalina.connector.Connector pause SEVERE: Protocol handler pause failed java.net.UnknownHostException: S1: S1 at java.net.InetAddress.getLocalHost(InetAddress.java:1353) at org.apache.jk.common.ChannelSocket.unLockSocket(ChannelSocket.java:485) Which then leads to: ERROR ehcache.Cache - Unable to set localhost. This prevents creation of a GUID. Cause was: Sjira1: S1 java.net.UnknownHostException: S1: S1 at java.net.InetAddress.getLocalHost(InetAddress.java:1353) at net.sf.ehcache.Cache.<clinit>(Cache.java:143) My hosts file is: 127.0.0.1 localhost localhost.localdomain (valid-ip-address) S1 S1.(valid domain name) ping S1 and S1.(valid domain name) return valid ip address nslookup S1.(valid domain name) returns valid ip address nslookup S1 throws ** server can't find S1: NXDOMAIN Any ideas about how to fix this ? Thanks

  Read the article

• Problem with tomcat and getLocalHost exception

  - by xain

  I'm running a Linux server named S1 in a "cloud" server, and when tomcat 6.0.24 starts, I get the exception: org.apache.catalina.connector.Connector pause SEVERE: Protocol handler pause failed java.net.UnknownHostException: S1: S1 at java.net.InetAddress.getLocalHost(InetAddress.java:1353) at org.apache.jk.common.ChannelSocket.unLockSocket(ChannelSocket.java:485) Which then leads to: ERROR ehcache.Cache - Unable to set localhost. This prevents creation of a GUID. Cause was: Sjira1: S1 java.net.UnknownHostException: S1: S1 at java.net.InetAddress.getLocalHost(InetAddress.java:1353) at net.sf.ehcache.Cache.<clinit>(Cache.java:143) My hosts file is: 127.0.0.1 localhost localhost.localdomain (valid-ip-address) S1 S1.(valid domain name) ping S1 and S1.(valid domain name) return valid ip address nslookup S1.(valid domain name) returns valid ip address nslookup S1 throws ** server can't find S1: NXDOMAIN Any ideas about how to fix this ? Thanks

  Read the article

• KVM-Guests can't get past bridge - no internet connection

  - by tmn29a

  I'm running a backported KVM on a Debian Squeeze. ATM the KVM-Guest can't connect to the internet through the bridge I have set up. The guests can reach each other, the host but nothing outside. I can neither ping, nslookup or do anything to a remote address. The guest are configured to have a static IP. When I didn;t have the bridge but a virtual bridge (the KVM-default) the guest could connect fine. After setting up the bridge things broke, so I think the problem lies there. # The loopback network interface auto lo br0 iface lo inet loopback # Bonding Interface auto bond0 iface bond0 inet static address 10.XXX.XXX.84 netmask 255.255.255.192 network 10.XXX.XXX.64 gateway 10.XXX.XXX.65 slaves eth0 eth1 bond_mode active-backup bond_miimon 100 bond_downdelay 200 bond_updelay 200 iface br0 inet static bridge_ports eth0 eth1 address 172.xxx.xxx.65 broadcast 172.xxx.xxx.127 netmask 255.255.255.192 gateway 172.xxx.xxx.65 bridge_stp on bridge_maxwait 0 Thanks in advance for your help !

  Read the article

• IPV6 auto configuration not working

  - by Allan Ruin

  In Windows 7, my computer can automatically get a IPV6 global address and use IPV6 network, but in Ubuntu Natty, I can't find out how to let stateless configuration work. My network is a university campus network,so I don't need tunnels. I think if one thing can silently and successfully be accomplished in Windows, it shouldn't be impossible in linux. I tried manually editing /etc/network/interfaces and used a static IPV6 address, and I can use IPV6 this way, but I just want to use auto-configuration. I found this post: http://superuser.com/questions/33196/how-to-disable-autoconfiguration-on-ipv6-in-linux and tried sudo sysctl -w net.ipv6.conf.all.autoconf=1 sudo sysctl -w net.ipv6.conf.all.accept_ra=1 but without any luck. I got this in dmesg: root@natty-150:~# dmesg |grep IPv6 [ 26.239607] eth0: no IPv6 routers present [ 657.365194] eth0: no IPv6 routers present [ 719.101383] eth0: no IPv6 routers present [32864.604234] eth0: no IPv6 routers present [33267.619767] eth0: no IPv6 routers present [33341.507307] eth0: no IPv6 routers present I am not sure whether it matters,but then I setup a static IPv6 address (with gateway) and restart network,I ping6 ipv6.google.com and the ipv6 network is fine.This time a entry was added in dmesg [33971.214920] eth0: no IPv6 routers present So I guess the complain of no IPv6 router does not matter? Here is the ipv6 forwarding setting.But I guessed forwarding is used for radvd stuff? root@natty-150:/# cat /proc/sys/net/ipv6/conf/eth0/forwarding 0 After ajmitch mentioned forwarding setting, I added this to sysctl.conf file: net.ipv6.conf.all.autoconf = 1 net.ipv6.conf.all.accept_ra = 1 net.ipv6.conf.default.forwarding = 1 net.ipv6.conf.lo.forwarding = 1 net.ipv6.conf.eth0.forwarding = 1 and then ran sysctl -p /etc/init.d/networking restart But this still doesn't work.

  Read the article

• Double default gateway ubuntu server

  - by Elena

  I've just installed an Ubuntu server 9.10 on an EEEBox. This is my /etc/network/interfaces # The loopback network interface auto lo iface lo inet loopback auto wlan0 iface wlan0 inet static address 192.168.48.16 netmask 255.255.248.0 wireless-essid mynet auto eth0 iface eth0 inet static address xx.xx.xx.xx netmask 255.255.255.224 gateway xx.xx.yy.yy When I restart /etc/init.d/networking, I can access the eth0 ip address from the internet and I can ping the machines in my wifi network mynet. Everything works fine and I have one default gateway. But after some time if I check again the route I just find two default gateways: one is correct and is the previous one, but the other is the one of the wifi network. I have a quite low signal of mynet where my server is and sometimes the wifi just disconnect and then reconnect again. Then I think that this can be a problem and the dhcp of the wifi net, when reconnecting it also add a default gateway. Any idea on how to resolve this issue?

  Read the article

• What are the implications of expanding an internal subnet mask?

  - by Philip

  Our network is currently working on a 192.168.0.x subnet, all controlled through DHCP, except for the few main servers who have hard-configured IP address settings. What would I kill if I changed the DHCP-published subnet mask from 255.255.255.0 to 255.255.0.0? The reason for doing this is not because we have a huge sudden influx of machines, but because I'd like to start partitioning specific devices into specific IP ranges (to be neat and tidy). For what its worth, I don' plan on changing the allocated DHCP address range, but rather want to move some of the reserved and excluded DHCP addresses out of the address pool. e.g. printers will be 192.168.2.x I will obviously need to change the subnet mask manually on my manually configured devices.

  Read the article

• IP tables gateway

  - by WojonsTech

  I am trying to make an iptables gateway. I ordered 3 dedicated server from my hosting company all with dual nics. One server has been given all the ip addresses and is connected directly to the internet and has its other nic connected to a switch where the other servers are all connected also. I want to setup iptables so for example the ip address 50.0.2.4 comes into my gateway server it fowards all the traffic to a private ip address using the second nic. This way the second nic can do what ever it needs and can respond back also. I also want it setup that if any of the other servers needs to download anything over the inernet it is able to do so and by using the same ip address that is used for its incomming traffic. Lastly I would like to be able to setup dns and other needed networking stuff that i maybe not thinking about.

  Read the article

• Two group of name server records, where to put them?

  - by sazary

  I've registered my domain by a registrar that has very poor DNS management tools. I need to point from my registrar to another third-party DNS manager, and then from there point to the name servers of my host, along with some other DNS records (such as SPF records). What I've done now is this: I've given the address of the name servers of my third-party DNS manager to the DNS manager of my registrar, and then I've given the address of the name servers of my host to the third-party DNS manager, along with some SPF and MX records. Is this work correct? Or should I add the NS address of my host to my registrar DNS manager too? The problem is that my domain doesn't resolve to my host, and I see some strange records in some DNS servers around the world that I have not set!

  Read the article

• sendmail rules for filtering spam

  - by user71061

  Hi! Can anyone help me with constructing sendmail rules for limiting spam? Assuming that name of my domain is my.domain.com, I want to use following rules: If BOTH sender and recipient address is from my.domain.com, message should be rejected (sendmail server only relays messages between my internal exchange server and outside word, so sending messages between users from my.domain.com always occour on exchange server and never on sendmail server) If recipient list contains AT LAST ONE invalid address, whole message should be rejected (even for valid recipients addresses) If sending server uses HELO message with bogus domain name (other than domain of this server), message should be rejected Any server attempting to send mail to dedicated address (f.e. [email protected]), should be automatically blacklisted Any other suggested rules ...

  Read the article

• Cablemodem frequent connection loss

  - by LVDave

  I have a Linksys BEFCMU10 cablemodem and a WRT54GL router with Tomato 1.27 firmware on Cox cable. My question is this: I get what seems to be random disconnects from the internet, where the cable modem lights are still normal, but I can connect nowhere, either via a url or an ip address. At the same time these disconnects are happening, I can go to the router's Tomato management webpage, and release/renew my external IP address from Cox's DHCP server. I've had Cox look at the signal levels on the cable modem, and they say they look fine. What brings back the modem, for sometimes as long as 17 days, is several power-cycles of the modem. I don't understand the underlying cable modem technology too well, but I do know that if I'm able to release/renew the DHCP-provided WAN address, I'd expect that the cable modem was working ok... Anybody have any ideas??

  Read the article

• resolv.conf doesn't get set on reboot when networking is configured for static ip

  - by kenneth koontz

  I'm experiencing, what appears to be a hostname resolution issue in ubuntu 12.04 server edition when configuring my computer to use a static ip. In /etc/network/interfaces: # The primary network interface auto eth0 iface eth0 inet static address 192.168.1.28 netmask 255.255.255.0 gateway 192.168.1.1 Running $ sudo apt-get upgrade, results in a 'Failed to fetch...': . . . W: Failed to fetch http://us.archive.ubuntu.com/ubuntu/dists/precise-backports/universe/i18n/Translation-en_US Something wicked happened resolving 'us.archive.ubuntu.com:http' (-5 - No address associated with hostname) W: Failed to fetch http://us.archive.ubuntu.com/ubuntu/dists/precise-backports/universe/i18n/Translation-en Something wicked happened resolving 'us.archive.ubuntu.com:http' (-5 - No address associated with hostname) E: Some index files failed to download. They have been ignored, or old ones used instead. When I change my /etc/network/interfaces to: auto eth0 iface eth0 inet dhcp Everything works fine. Looking into /etc/resolv.conf provides some more hints...In cases where I was getting the resolving issue, resolve.conf was empty. No nameservers were specified. When I changed to dhcp from static and restarted networking. /etc/resolv.conf gets written to: 'nameserver 192.168.1.1'. Switching back from dhcp to static and restarting doesn't remove the nameserve entry. When I restart the system with static set, resolv.conf is empty. When I restart the system with dhcp set, resolv.conf has nameserver 192.168.1.1. So it appears that the issue is that resolve.conf is not getting written to correctly? Which package/code is responsible for writing to resolv.conf? Is there a particular package that I can take a look at open issues? UPDATE: istream posted a good article discussing changes to resolve.conf in 12.04. http://www.stgraber.org/2012/02/24/dns-in-ubuntu-12-04/

  Read the article

• Customizing post-commit messages in svn for different users

  - by Suresh

  I have an svn repository that users can access (read/write) using their account OR via tunneling over ssh with svnserve. I also have a post-commit hook that sends mails to specific users for different projects via svnnotify: the typical command is svnnotify <params> --to-regex-map <list of email IDs> <regex> For users who have accounts on the system, the notification email is sent from @machine.domain, which is fine. For users coming in via tunnelling, the email gets sent from @machine.domain, which is a fake address since these users don't have an account - the only reason I specify a tunnel-user id is to keep track of who made which update. So my question (finally) is: is there a way to pass a parameter (the "true" email address) to svnserve so that when the post-commit mail is sent, it can be sent "from" the correct email address ? p.s this is my first post here - if I haven't provided sufficient information, apologies: I'm happy to provide more details.

  Read the article

< Previous Page | 115 116 117 118 119 120 121 122 123 124 125 126  | Next Page >