Search Results

Search found 285 results on 12 pages for 'bruce connor'.

Page 12/12 | < Previous Page | 8 9 10 11 12 

  • Skipping scheduled self-tests and predicting drive EOL

    - by Steve Madsen
    For a few weeks now, smartd has been reporting that it is skipping some of its scheduled self-tests on the weekends: Apr 24 18:29:32 calvin smartd[4758]: Device: /dev/sda, skip scheduled Offline Immediate Test; 40% remaining of current Self-Test. Apr 24 18:29:33 calvin smartd[4758]: Device: /dev/sdb, skip scheduled Offline Immediate Test; 50% remaining of current Self-Test. The drives in this RAID-1 array are set to run an offline test four times a day, a short self-test at 2am every day, and a long self-test on Saturdays at 2am. For some reason, it looks like the long self-test is taking longer, causing the other scheduled tests to be skipped. First question: is this a sign of likely drive failure? Then today, smartd reported that a self-test failed. Here is the output of smartctl -a /dev/sdb: smartctl version 5.38 [i686-pc-linux-gnu] Copyright (C) 2002-8 Bruce Allen Home page is http://smartmontools.sourceforge.net/ === START OF INFORMATION SECTION === Model Family: Seagate Barracuda 7200.8 family Device Model: ST3250823AS Serial Number: 3ND1GNBC Firmware Version: 3.03 User Capacity: 250,059,350,016 bytes Device is: In smartctl database [for details use: -P show] ATA Version is: 7 ATA Standard is: Exact ATA specification draft version not indicated Local Time is: Sun Apr 25 13:15:34 2010 EDT SMART support is: Available - device has SMART capability. SMART support is: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x82) Offline data collection activity was completed without error. Auto Offline Data Collection: Enabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 430) seconds. Offline data collection capabilities: (0x5b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 1) minutes. Extended self-test routine recommended polling time: ( 84) minutes. SMART Attributes Data Structure revision number: 10 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x000f 047 039 006 Pre-fail Always - 168450357 3 Spin_Up_Time 0x0003 098 098 000 Pre-fail Always - 0 4 Start_Stop_Count 0x0032 100 100 020 Old_age Always - 33 5 Reallocated_Sector_Ct 0x0033 100 100 036 Pre-fail Always - 9 7 Seek_Error_Rate 0x000f 087 060 030 Pre-fail Always - 654745480 9 Power_On_Hours 0x0032 055 055 000 Old_age Always - 40141 10 Spin_Retry_Count 0x0013 100 100 097 Pre-fail Always - 0 12 Power_Cycle_Count 0x0032 100 100 020 Old_age Always - 51 194 Temperature_Celsius 0x0022 037 062 000 Old_age Always - 37 (0 17 0 0) 195 Hardware_ECC_Recovered 0x001a 047 039 000 Old_age Always - 168450357 197 Current_Pending_Sector 0x0012 100 100 000 Old_age Always - 0 198 Offline_Uncorrectable 0x0010 100 100 000 Old_age Offline - 0 199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always - 0 200 Multi_Zone_Error_Rate 0x0000 100 253 000 Old_age Offline - 0 202 TA_Increase_Count 0x0032 100 253 000 Old_age Always - 0 SMART Error Log Version: 1 No Errors Logged SMART Self-test log structure revision number 1 Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Short offline Completed without error 00% 40131 - # 2 Extended offline Completed: read failure 30% 40129 379795511 # 3 Short offline Completed without error 00% 40084 - # 4 Short offline Completed without error 00% 40060 - # 5 Short offline Completed without error 00% 40036 - # 6 Short offline Completed without error 00% 40013 - # 7 Short offline Completed without error 00% 39990 - # 8 Extended offline Completed without error 00% 39977 - # 9 Short offline Completed without error 00% 39919 - #10 Short offline Completed without error 00% 39895 - #11 Short offline Completed without error 00% 39872 - #12 Short offline Completed without error 00% 39848 - #13 Short offline Completed without error 00% 39824 - #14 Short offline Completed without error 00% 39801 - #15 Extended offline Completed without error 00% 39789 - #16 Short offline Completed without error 00% 39754 - #17 Short offline Completed without error 00% 39732 - #18 Short offline Completed without error 00% 39707 - #19 Short offline Completed without error 00% 39683 - #20 Short offline Completed without error 00% 39660 - #21 Short offline Completed without error 00% 39636 - SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. Given that this drive is about 4.5 years old, I am probably tempting fate by keeping it in service. SMART doesn't seem to get much respect as a reliable way to predict drive failure. What else can I use to get an early indication of drive failure?

    Read the article

  • top Tweets SOA Partner Community – August 2012

    - by JuergenKress
    Send your tweets @soacommunity #soacommunity and follow us at http://twitter.com/soacommunity Lucas Jellema ?Published an article about organizing Fusion Middleware Administration: http://technology.amis.nl/2012/07/31/organizing-fusion-middleware-administration-in-a-smart-and-frugal-way … - many organizations are struggling with this. ServiceTechSymposium Countdown to the Early Bird Registration Discount deadline. Only 4 days left! http://ow.ly/cBCiv demed ?Good chatting w Bob Rhubart, Thomas Erl & Tim Hall on SOA & Cloud Symposium https://blogs.oracle.com/archbeat/entry/podcast_show_notes_thomas_erl … @soaschool @OTNArchBeat -- CU in London! SOA Community top Tweets SOA Partner Community July 2012 - are you one of them? If yes please rt! https://soacommunity.wordpress.com/2012/07/30/top-tweets-soa-partner-community-july-2012/ … #soacommunity SOA Community ?Are You a facebook member - do You follow http://www.facebook.com/soacommunity ? #soacommunity #soa SOA Community ?SOA 24/7 - Home Page: http://soa247.com/#.UBJsN8n3kyk.twitter … #soacommunity OracleBlogs ?Handling Large Payloads in SOA Suite 11g http://ow.ly/1lFAih OracleBlogs ?SOA Community Newsletter July 2012 http://ow.ly/1lFx6s OTNArchBeat Podcast Show Notes: Thomas Erl on SOA, Cloud, and Service Technology http://bit.ly/OOHTUJ SOA Community SOA Community Newsletter July 2012 http://wp.me/p10C8u-s7 OTNArchBeat ?OTN ArchBeat Podcast: Thomas Erl on SOA, Cloud, and Service Technology - Part 1 http://pub.vitrue.com/fMti OProcessAccel ?Just released! White Paper: Oracle Process Accelerators Best Practices http://www.oracle.com/technetwork/middleware/bpm/learnmore/processaccelbestpracticeswhitepaper-1708910.pdf … OTNArchBeat ?SOA, Cloud, and Service Technologies - Part 1 of 4 - A conversation with SOA, Cloud, and Service Technology Symposiu... http://ow.ly/1lDyAK OracleBlogs ?SOA Suite 11g PS5 Bundled Patch 3 (11.1.1.6.3) http://ow.ly/1lCW1S Simon Haslam My write-up of the virtues of the #ukoug App Server & Middleware SIG http://bit.ly/LMWdfY What's important to you for our next meeting? SOA Community SOA Partner Community Survey 2012 http://wp.me/p10C8u-qY Simone Geib ?RT @jswaroop: #Oracle positioned in the Leader's quadrant - Gartner Magic Quadrants for Application Infrastructure (SOA & SOA Gov)... ServiceTechSymposium New Supporting Organization, IBTI has joined the Symposium! http://www.servicetechsymposium.com/ orclateamsoa ?A-Team Blog #ateam: BPM 11g Task Form Version Considerations http://ow.ly/1lA7XS OTNArchBeat Oracle content at SOA, Cloud and Service Technology Symposium (and discount code!) http://pub.vitrue.com/FPcW OracleBlogs ?BPM 11g Task Form Version Considerations http://ow.ly/1lzOrX OTNArchBeat BPM 11g #ADF Task Form Versioning | Christopher Karl Chan #fusionmiddleware http://pub.vitrue.com/0qP2 OTNArchBeat Lightweight ADF Task Flow for BPM Human Tasks Overview | @AndrejusB #fusionmiddleware http://pub.vitrue.com/z7x9 SOA Community Oracle Fusion Middleware Summer Camps in Lisbon report by Link Consulting http://middlewarebylink.wordpress.com/2012/07/20/oracle-fusion-middleware-summer-camps-in-lisbon/ … #ofmsummercamps #soa #bpm SOA Community ?Clemens Utschig-Utschig & Manas Deb The Successful Execution of the SOA and BPM Vision Using a Business Capability Framework: Concepts… Simone Geib ?RT @oprocessaccel: Just released! White Paper: Oracle Process Accelerators Best Practices http://www.oracle.com/technetwork/middleware/bpm/learnmore/processaccelbestpracticeswhitepaper-1708910.pdf … jornica ?Report from Oracle Fusion Middleware Summer Camps in Munich: SOA Suite 11g advanced training experiences @soacommunity http://bit.ly/Mw3btE Simone Geib ?Bruce Tierney: Update - SOA & BPM Customer Insights Webcast Series: | https://blogs.oracle.com/SOA/entry/update_soa_bpm_customer_insights … OTNArchBeat Business SOA: Thinking is Dead | @mosesjones http://pub.vitrue.com/k8mw esentri ?had 3 great days in Munich at #Oracle #soacommunity Summercamp! Special thanks to Geoffroy de Lamalle from eProseed! Danilo Schmiedel ?Used my time in train to setup the ps5 soa/bpm vbox-image.Works like a dream. Setup-Readme is perfect! Saves a lot of time!!! @soacommunity 18 Jul SOA Community ?THANKS for the excellent OFM summer camps - save trip home - share your pictures at http://www.facebook.com/soacommunity #ofmsummercamps #soacommunity doors BBQ-party with Oracle @soacommunity. 5Star! #lovemunich #ofmsummercamps pic.twitter.com/ztfcGn2S leonsmiers ?New #Capgemini blog post "Continuous Improvement of Business Agility" http://bit.ly/Lr0EwG #bpm #yam Eric Elzinga ?MDS Explorer utility, http://see.sc/4qdb43 #soasuite ServiceTechSymposium ?@techsymp New speaker Demed L’Her from Oracle has been added to the symposium calendar. http://ow.ly/cjnyw SOA Community ?Last day of the Fusion Middleware summer camps - we continue at 9.00 am. send us your barbecue pictures! #ofmsummercamps #soacommunity SOA Community ?Delivering SOA Governance with EAMS and Oracle Enterprise Repository by Link Consulting http://middlewarebylink.wordpress.com/2012/06/26/delivering-soa-governance-with-eams-and-oracle-enterprise-repository/ … #soacommunity #soa #oer OracleBlogs ?Process Accelerator Kit http://ow.ly/1loaCw 15 Jul SOA Community ?Sun is back in Munich! Send your pictures Middleware summer camps! #ofmsummercamps We start tomorrow 11.00 at Oracle pic.twitter.com/6FStxomk Walter Montantes ?Gracias, Obrigado, Thank you, Danke a Lisboa y a @soacommunity @wlscommunity. From the Mexican guys!! cc @mikeintoch #ofmsummercamps Andrejus Baranovskis Tips & Tricks How to Run Oracle BPM 11g PS5 Workspace from Custom ADF 11g Application http://fb.me/1zOf3h2K8 JDeveloper & ADF ?Fusion Apps Enterprise Repository - Explained http://dlvr.it/1rpjWd Steve Walker ?Oracle #Exalogic is the logical choice for running business applications. Exalogic Software 2.0 launches 7/25. Reg at http://bit.ly/NedQ9L A. Chatziantoniou ?Landed in rainy Amsterdam after a great week in Lisbon for the #ofmsummercamps - multo obrigado for Jürgen for another fantastic event SOA Community ?Teams present #BPM11g POC results at #ofmsummercamps - great job! #soacommunity pic.twitter.com/0d4txkWF Sabine Leitner ?#DOAG SIG Middleware 29.08.2012 Köln über MW, Administration, Monitoring http://bit.ly/P47w82 @soacommunity @OracleMW @OracleFMW 12 Jul philmulhall ?Thanks @soacommunity for a great week at the #ofmsummercamps. Hard work done so time for a few cold ones in Lisboa. pic.twitter.com/LVUUuwTh peter230769 ?RT: andrea_rocco_31: RT @soacommunity: Enjoy the networking event at #ofmsummercamps want to attend next time ... pic.twitter.com/D1HRndi4 Niels Gorter ?#ofmsummercamps dinner in Lisbon. Great weather, scenery, training, people, on and on. Big THANKS @soacommunity JDeveloper & ADF ?Running Oracle BPM 11g PS5 Worklist Task Flow and Human Task Form on Non-SOA Domain http://dlvr.it/1r0c2j Andrea Rocco ?RT @soacommunity: Jamy pastry at cafe Belem - who is the ghost there?!? http://via.me/-2x33uk6 Simon Haslam ?Sounds great - sorry I couldn't make it. RT @soacommunity: 6pm BPM advanced training hard work to build the POC #ofmsummercamps philmulhall ?A well earned rest after a hard days work @soacommunity #summercamps pic.twitter.com/LKK7VOVS philmulhall ?Some more hard working delegates @soacommunity #summercamps pic.twitter.com/gWpk1HZh SOA Community ?Error message at the BPM POC - will The #ace director understand the message and solve it? #ofmsummercamps pic.twitter.com/LFTEzNck Daniel Kleine-Albers ?posted on the #thecattlecrew blog: Assigning more memory to JDeveloper http://thecattlecrew.wordpress.com/2012/07/10/jdeveloper-quicktip-assigning-more-memory/ … OTNArchBeat ?BAM design pointers | Kavitha Srinivasan http://pub.vitrue.com/TOhP SOA Community ?Did you receive the July SOA community newsletter? read it! Want to become a member http://www.oracle.com/goto/emea/soa #soacommunity #soa #opn OracleBlogs ?Markus Zirn, Big Data with CEP and SOA @ SOA, Cloud &amp; Service Technology Symposium 2012 http://ow.ly/1lcSkb Andrejus Baranovskis Running Oracle BPM 11g PS5 Worklist Task Flow and Human Task Form on Non-SOA Eric Elzinga ?Service Facade design pattern in OSB, http://bit.ly/NnOExN Eric Elzinga ?New BPEL Thread Pool in SOA 11g for Non-Blocking Invoke Activities from 11.1.1.6 (PS5), http://bit.ly/NnOc2G Gilberto Holms New Post: Siebel Connection Pool in Oracle Service Bus 11g http://wp.me/pRE8V-2z Oracle UPK & Tutor ?UPK Pre-Built Content Update: UPK pre-built content development efforts are always underway and growing. Ove... http://bit.ly/R2HeTj JDeveloper & ADF ?Troubleshooting BPMN process editor problems in 11.1.1.6 http://dlvr.it/1p0FfS orclateamsoa ?A-Team Blog #ateam: BAM design pointers - In working recently with a large Oracle customer on SOA and BAM, I discove... http://ow.ly/1kYqES SOA Community BPMN process editor problems in 11.1.1.6 by Mark Nelson http://redstack.wordpress.com/2012/06/27/bpmn-process-editor-problems-in-11-1-1-6 … #soacommunity #bpm OTNArchBeat ?SOA Learning Library: free short, topic-focused training on Oracle SOA & BPM products | @SOACommunity http://pub.vitrue.com/NE1G Andrejus Baranovskis ?ADF 11g PS5 Application with Customized BPM Worklist Task Flow (MDS Seeded Customization) http://fb.me/1coX4r1X1 OTNArchBeat ?A Universal JMX Client for Weblogic –Part 1: Monitoring BPEL Thread Pools in SOA 11g | Stefan Koser http://pub.vitrue.com/mQVZ OTNArchBeat ?BPM – Disable DBMS job to refresh B2B Materialized View | Mark Nelson http://pub.vitrue.com/3PR0 SOA & BPM Partner Community For regular information on Oracle SOA Suite become a member in the SOA & BPM Partner Community for registration please visit  www.oracle.com/goto/emea/soa (OPN account required) If you need support with your account please contact the Oracle Partner Business Center. Blog Twitter LinkedIn Mix Forum Technorati Tags: SOA Community twitter,SOA Community,Oracle SOA,Oracle BPM,BPM Community,OPN,Jürgen Kress

    Read the article

  • SATA errors reported during boot: exception Emask 0x40 SAct 0x0 SErr 0x80800 action 0x0

    - by digby280
    I have noticed some error during the Linux boot. They seem to continue to occur after the boot adding lines to the log every few seconds. Once booted this normally does not appear to be causing any problems. However, around 1 in 10 boots results in a kernel panic and the computer has on two or three occasions suddenly rebooted after being powered on for a number of hours. I presume the cause of the reboot is a kernel panic as well. I am running Ubuntu 11.10 and I have had Ubuntu installed on the computer for around a year. I have googled around and not found anything useful. I have provided the kernel log lines and the output of smartctl. Can anyone explain exactly what these errors mean, or better still how to resolve them? Apr 2 16:51:27 dell580 kernel: [ 19.831140] EXT4-fs (sdb2): re-mounted. Opts: errors=remount-ro,user_xattr,commit=0 Apr 2 16:51:27 dell580 kernel: [ 19.934194] tg3 0000:03:00.0: eth0: Link is down Apr 2 16:51:28 dell580 kernel: [ 20.929468] tg3 0000:03:00.0: eth0: Link is up at 100 Mbps, full duplex Apr 2 16:51:28 dell580 kernel: [ 20.929471] tg3 0000:03:00.0: eth0: Flow control is on for TX and on for RX Apr 2 16:51:28 dell580 kernel: [ 20.929727] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready Apr 2 16:51:29 dell580 kernel: [ 21.609381] EXT4-fs (sdb2): re-mounted. Opts: errors=remount-ro,user_xattr,commit=0 Apr 2 16:51:29 dell580 kernel: [ 21.616515] ata2.01: exception Emask 0x40 SAct 0x0 SErr 0x80800 action 0x0 Apr 2 16:51:29 dell580 kernel: [ 21.616519] ata2.01: SError: { HostInt 10B8B } Apr 2 16:51:29 dell580 kernel: [ 21.616525] ata2.00: hard resetting link Apr 2 16:51:29 dell580 kernel: [ 21.934036] ata2.01: hard resetting link Apr 2 16:51:29 dell580 kernel: [ 22.408890] ata2.00: SATA link up 1.5 Gbps (SStatus 113 SControl 300) Apr 2 16:51:29 dell580 kernel: [ 22.408907] ata2.01: SATA link up 3.0 Gbps (SStatus 123 SControl 300) Apr 2 16:51:29 dell580 kernel: [ 22.440934] ata2.00: configured for UDMA/100 Apr 2 16:51:29 dell580 kernel: [ 22.449040] ata2.01: configured for UDMA/133 Apr 2 16:51:29 dell580 kernel: [ 22.449818] ata2: EH complete Apr 2 16:51:33 dell580 kernel: [ 26.122664] ata2.01: exception Emask 0x40 SAct 0x0 SErr 0x80800 action 0x0 Apr 2 16:51:33 dell580 kernel: [ 26.122670] ata2.01: SError: { HostInt 10B8B } Apr 2 16:51:33 dell580 kernel: [ 26.122677] ata2.00: hard resetting link Apr 2 16:51:33 dell580 kernel: [ 26.442684] ata2.01: hard resetting link Apr 2 16:51:34 dell580 kernel: [ 26.925545] ata2.00: SATA link up 1.5 Gbps (SStatus 113 SControl 300) Apr 2 16:51:34 dell580 kernel: [ 26.925561] ata2.01: SATA link up 3.0 Gbps (SStatus 123 SControl 300) Apr 2 16:51:34 dell580 kernel: [ 26.961542] ata2.00: configured for UDMA/100 Apr 2 16:51:34 dell580 kernel: [ 26.969616] ata2.01: configured for UDMA/133 Apr 2 16:51:34 dell580 kernel: [ 26.970400] ata2: EH complete Apr 2 16:51:35 dell580 kernel: [ 28.111180] ata2.01: exception Emask 0x40 SAct 0x0 SErr 0x80800 action 0x0 Apr 2 16:51:35 dell580 kernel: [ 28.111184] ata2.01: SError: { HostInt 10B8B } Apr 2 16:51:35 dell580 kernel: [ 28.111191] ata2.00: hard resetting link Apr 2 16:51:35 dell580 kernel: [ 28.429674] ata2.01: hard resetting link Apr 2 16:51:36 dell580 kernel: [ 28.904557] ata2.00: SATA link up 1.5 Gbps (SStatus 113 SControl 300) Apr 2 16:51:36 dell580 kernel: [ 28.904572] ata2.01: SATA link up 3.0 Gbps (SStatus 123 SControl 300) Apr 2 16:51:36 dell580 kernel: [ 28.936609] ata2.00: configured for UDMA/100 Apr 2 16:51:36 dell580 kernel: [ 28.944692] ata2.01: configured for UDMA/133 Apr 2 16:51:36 dell580 kernel: [ 28.945464] ata2: EH complete Apr 2 16:51:38 dell580 kernel: [ 31.581756] eth0: no IPv6 routers present Apr 2 16:51:38 dell580 kernel: [ 32.103066] ata2.01: exception Emask 0x40 SAct 0x0 SErr 0x80800 action 0x0 Apr 2 16:51:38 dell580 kernel: [ 32.103074] ata2.01: SError: { HostInt 10B8B } Apr 2 16:51:38 dell580 kernel: [ 32.103085] ata2.00: hard resetting link Apr 2 16:51:38 dell580 kernel: [ 32.419669] ata2.01: hard resetting link Apr 2 16:51:39 dell580 kernel: [ 32.894518] ata2.00: SATA link up 1.5 Gbps (SStatus 113 SControl 300) Apr 2 16:51:39 dell580 kernel: [ 32.894533] ata2.01: SATA link up 3.0 Gbps (SStatus 123 SControl 300) Apr 2 16:51:39 dell580 kernel: [ 32.926536] ata2.00: configured for UDMA/100 Apr 2 16:51:39 dell580 kernel: [ 32.934715] ata2.01: configured for UDMA/133 Apr 2 16:51:39 dell580 kernel: [ 32.935578] ata2: EH complete Here's the output of smartctl for the drive. smartctl 5.41 2011-06-09 r3365 [x86_64-linux-3.0.0-17-generic] (local build) Copyright (C) 2002-11 by Bruce Allen, http://smartmontools.sourceforge.net === START OF INFORMATION SECTION === Model Family: SAMSUNG SpinPoint F1 DT Device Model: SAMSUNG HD103UJ Serial Number: S13PJ90QC19706 LU WWN Device Id: 5 0000f0 00b1c7960 Firmware Version: 1AA01113 User Capacity: 1,000,204,886,016 bytes [1.00 TB] Sector Size: 512 bytes logical/physical Device is: In smartctl database [for details use: -P show] ATA Version is: 8 ATA Standard is: ATA-8-ACS revision 3b Local Time is: Mon Apr 2 17:13:48 2012 BST SMART support is: Available - device has SMART capability. SMART support is: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x00) Offline data collection activity was never started. Auto Offline Data Collection: Disabled. Self-test execution status: ( 41) The self-test routine was interrupted by the host with a hard or soft reset. Total time to complete Offline data collection: (11772) seconds. Offline data collection capabilities: (0x7b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 197) minutes. Conveyance self-test routine recommended polling time: ( 21) minutes. SCT capabilities: (0x003f) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x000f 100 100 051 Pre-fail Always - 0 3 Spin_Up_Time 0x0007 076 076 011 Pre-fail Always - 7940 4 Start_Stop_Count 0x0032 099 099 000 Old_age Always - 521 5 Reallocated_Sector_Ct 0x0033 100 100 010 Pre-fail Always - 0 7 Seek_Error_Rate 0x000f 253 253 051 Pre-fail Always - 0 8 Seek_Time_Performance 0x0025 100 100 015 Pre-fail Offline - 0 9 Power_On_Hours 0x0032 100 100 000 Old_age Always - 642 10 Spin_Retry_Count 0x0033 100 100 051 Pre-fail Always - 0 11 Calibration_Retry_Count 0x0012 100 100 000 Old_age Always - 0 12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 482 13 Read_Soft_Error_Rate 0x000e 100 100 000 Old_age Always - 0 183 Runtime_Bad_Block 0x0032 100 100 000 Old_age Always - 759 184 End-to-End_Error 0x0033 100 100 000 Pre-fail Always - 0 187 Reported_Uncorrect 0x0032 100 100 000 Old_age Always - 0 188 Command_Timeout 0x0032 100 100 000 Old_age Always - 0 190 Airflow_Temperature_Cel 0x0022 073 069 000 Old_age Always - 27 (Min/Max 16/27) 194 Temperature_Celsius 0x0022 073 067 000 Old_age Always - 27 (Min/Max 16/28) 195 Hardware_ECC_Recovered 0x001a 100 100 000 Old_age Always - 320028 196 Reallocated_Event_Count 0x0032 100 100 000 Old_age Always - 0 197 Current_Pending_Sector 0x0012 100 100 000 Old_age Always - 0 198 Offline_Uncorrectable 0x0030 100 100 000 Old_age Offline - 0 199 UDMA_CRC_Error_Count 0x003e 099 099 000 Old_age Always - 1494 200 Multi_Zone_Error_Rate 0x000a 100 100 000 Old_age Always - 0 201 Soft_Read_Error_Rate 0x000a 253 253 000 Old_age Always - 0 SMART Error Log Version: 1 ATA Error Count: 211 (device log contains only the most recent five errors) CR = Command Register [HEX] FR = Features Register [HEX] SC = Sector Count Register [HEX] SN = Sector Number Register [HEX] CL = Cylinder Low Register [HEX] CH = Cylinder High Register [HEX] DH = Device/Head Register [HEX] DC = Device Command Register [HEX] ER = Error register [HEX] ST = Status register [HEX] Powered_Up_Time is measured from power on, and printed as DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, SS=sec, and sss=millisec. It "wraps" after 49.710 days. Error 211 occurred at disk power-on lifetime: 0 hours (0 days + 0 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 84 51 0f 31 63 8f e1 Error: ICRC, ABRT 15 sectors at LBA = 0x018f6331 = 26174257 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- c8 00 00 40 62 8f e1 08 00:01:00.460 READ DMA c8 00 20 00 7c 30 e0 08 00:01:00.450 READ DMA c8 00 00 10 49 8f e1 08 00:01:00.440 READ DMA c8 00 e0 20 d0 30 e0 08 00:01:00.420 READ DMA c8 00 00 c0 59 90 e1 08 00:01:00.400 READ DMA Error 210 occurred at disk power-on lifetime: 0 hours (0 days + 0 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 84 51 cf e9 cf 66 e0 Error: ICRC, ABRT 207 sectors at LBA = 0x0066cfe9 = 6737897 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- c8 00 00 b8 cf 66 e0 08 00:08:29.780 READ DMA c8 00 60 60 c9 18 e0 08 00:08:29.770 READ DMA c8 00 40 20 c9 18 e0 08 00:08:29.770 READ DMA c8 00 20 00 c9 18 e0 08 00:08:29.760 READ DMA c8 00 20 98 cf 66 e0 08 00:08:29.750 READ DMA Error 209 occurred at disk power-on lifetime: 0 hours (0 days + 0 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 84 51 2f d1 74 e0 e0 Error: ICRC, ABRT 47 sectors at LBA = 0x00e074d1 = 14709969 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- c8 00 00 00 74 e0 e0 08 00:00:30.940 READ DMA c8 00 20 18 36 de e0 08 00:00:30.930 READ DMA c8 00 08 48 f1 dd e0 08 00:00:30.930 READ DMA c8 00 08 a8 f0 dd e0 08 00:00:30.930 READ DMA c8 00 08 90 f0 dd e0 08 00:00:30.930 READ DMA Error 208 occurred at disk power-on lifetime: 0 hours (0 days + 0 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 84 51 7f 21 88 9d e0 Error: ICRC, ABRT 127 sectors at LBA = 0x009d8821 = 10324001 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- c8 00 a0 00 88 9d e0 08 00:00:27.610 READ DMA c8 00 58 a8 e7 9c e0 08 00:00:27.610 READ DMA c8 00 00 28 e6 9c e0 08 00:00:27.610 READ DMA c8 00 00 e0 e4 9c e0 08 00:00:27.610 READ DMA c8 00 00 90 e0 9c e0 08 00:00:27.600 READ DMA Error 207 occurred at disk power-on lifetime: 0 hours (0 days + 0 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 04 51 26 6a 6a c3 e0 Error: ABRT at LBA = 0x00c36a6a = 12806762 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- ca 00 00 90 69 c3 e0 08 00:29:39.350 WRITE DMA ca 00 40 90 68 c3 e0 08 00:29:39.350 WRITE DMA ca 00 40 50 65 c3 e0 08 00:29:39.350 WRITE DMA ca 00 40 d0 64 c3 e0 08 00:29:39.350 WRITE DMA ca 00 40 90 63 c3 e0 08 00:29:39.350 WRITE DMA SMART Self-test log structure revision number 1 Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Short offline Interrupted (host reset) 90% 638 - # 2 Short offline Interrupted (host reset) 90% 638 - # 3 Extended offline Interrupted (host reset) 90% 638 - # 4 Short offline Interrupted (host reset) 90% 638 - # 5 Extended offline Interrupted (host reset) 90% 638 - SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay.

    Read the article

  • Want to be part of the most meaningful Customer Experience conversation today?

    - by Tony Berk
    v\:* {behavior:url(#default#VML);} o\:* {behavior:url(#default#VML);} w\:* {behavior:url(#default#VML);} .shape {behavior:url(#default#VML);} Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin:0in; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-fareast-font-family:"Times New Roman"; mso-fareast-theme-font:minor-fareast; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;} Today's entry is written by Chris Warner, Director, Product Strategy at Oracle. By now you’ve undoubtedly seen the blogs and announcements about Oracle OpenWorld. And perhaps you’ve also seen the news about OpenWorld’s newest sister event: Oracle Customer Experience (CX) Summit @ OpenWorld. Oracle CX Summit was created to be the most meaningful CX event, to be truly unique, to serve as the place to discover what it takes and what it really means to put the customer at the center of your business success. One long-time Oracle customer, when told about the Oracle CX Summit, put it this way: ‘This makes me rethink how I think about Oracle and Customer Experience’. Listen to what she heard and you be the judge. We believe Customer Experience (‘CX’) is a movement, not just the latest ‘IT’ tech trend. CX isn’t something you can simply ‘install’. CX is one of the most strategic initiatives an organization can undertake. Customer Experience is about connecting with an organization’s most important asset, the customer, and the critical role that connection has to an organization’s success. And there’s never been a bigger gathering of the smartest CX minds, most successful CX companies, and innovative CX examples than Oracle CX Summit. Take Subaru, for example. The company fully embraced the CX opportunity and their CX leadership will be on stage at the Oracle CX Summit to share their CX journey. They radically changed the way they interact with their customers, empower their employees, and differentiate their brand. And this is a story with a phenomenal happy ending: in a stagnant market and shrinking economy, they GREW their business and outpaced their competition. Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin:0in; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-fareast-font-family:"Times New Roman"; mso-fareast-theme-font:minor-fareast; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;} At Oracle CX Summit, you will be surrounded by dozens of CX leaders, visionaries and innovators like Subaru. This three-day event brings together the largest collection of thought leaders and practitioners in Customer Experience ever. Notable presenters include: v\:* {behavior:url(#default#VML);} o\:* {behavior:url(#default#VML);} w\:* {behavior:url(#default#VML);} .shape {behavior:url(#default#VML);} Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin:0in; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:10.0pt; font-family:"Calibri","sans-serif"; mso-bidi-font-family:"Times New Roman";} Seth Godin - World-renowned blogger and one ‘the World’s Top 21 Speakers’, author of 14 best-selling books like “Permission Marketing”, and founder of dozens of startups such as Squidoo.com (ranked one of the top 125 sites in the US). Kerry Bodine - VP Principal Analyst at Forrester for Customer Experience, author of the just-published book “Outside In - The Power of Putting Customers at the Center of Your Business”, and renowned author of “The Customer Experience Ecosystem”. Bruce Temkin - Co-founder and Chair of the Customer Experience Professionals Association, revered blogger of “Customer Experience Matters”, former VP Principal Analyst at Forrester for Customer Experience, Founder and Managing Partner of The Temkin Group, a leading Customer Experience research and consulting firm. George Kembel - Executive Director and Co-founder of the Stanford Design School, an established, recognized thought leader in design thinking and innovation, and a Silicon Valley based-CEO, venture capitalist and educator. Gene Alvarez - VP Research Analyst at Gartner and a recognized authority in the Retail and Consumer Goods industry. Gene has been published, featured and referenced in a variety of trade publications for Customer Experience insights. Senior Executives from innovative Customer Experience brands and agencies like AT&T, Intuit, Southwest Airlines, Marriott, Quiksilver, and Sapient. Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin:0in; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:10.0pt; font-family:"Calibri","sans-serif"; mso-bidi-font-family:"Times New Roman";} But the CX Summit includes much, much more. There are over 30+ role-driven sessions and rountables as well as one-of-a-kind events including: v\:* {behavior:url(#default#VML);} o\:* {behavior:url(#default#VML);} w\:* {behavior:url(#default#VML);} .shape {behavior:url(#default#VML);} Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin:0in; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:10.0pt; font-family:"Calibri","sans-serif"; mso-bidi-font-family:"Times New Roman";} The Customer Experience Innovation Tent featuring hands-on demonstrations of bleeding-edge customer experiences like the Share Happy Ice Cream Machine A hands-on Customer Journey Mapping Workshop that lets you learn design thinking techniques for innovating differentiated experiences that drive cross-functional alignment Access to the Oracle OpenWorld Exhibition Halls and DEMOgrounds as well as a week-long Live Music Festival and the Oracle Appreciation Event featuring Pearl Jam and Kings of Leon Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin:0in; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:10.0pt; font-family:"Calibri","sans-serif"; mso-bidi-font-family:"Times New Roman";} At Oracle, we are quite proud of our award-winning suite of CX products, a suite of solutions that can help an organization greatly accelerate their CX journey. But Oracle CX Summit isn’t about products. It’s about how an organization can succeed in its CX initiative. There’s never been a bigger gathering of the smartest CX minds, most successful CX companies, and innovative CX examples than Oracle CX Summit. Come join the Customer Experience Revolution. Register for Oracle CX Summit @ OpenWorld here. v\:* {behavior:url(#default#VML);} o\:* {behavior:url(#default#VML);} w\:* {behavior:url(#default#VML);} .shape {behavior:url(#default#VML);} Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin:0in; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:10.0pt; font-family:"Calibri","sans-serif"; mso-bidi-font-family:"Times New Roman";} --

    Read the article

  • CodePlex Daily Summary for Sunday, June 30, 2013

    CodePlex Daily Summary for Sunday, June 30, 2013Popular ReleasesGardens Point LEX: Gardens Point LEX version 1.2.1: The main distribution is a zip file. This contains the binary executable, documentation, source code and the examples. ChangesVersion 1.2.1 has new facilities for defining and manipulating character classes. These changes make the construction of large Unicode character classes more convenient. The runtime code for performing automaton backup has been re-implemented, and is now faster for scanners that need backup. Source CodeThe distribution contains a complete VS2010 project for the appli...ZXMAK2: Version 2.7.5.7: - fix TZX emulation (Bruce Lee, Zynaps) - fix ATM 16 colors for border - add memory module PROFI 512K; add PROFI V03 rom image; fix PROFI 3.XX configVidCoder: 1.5.1 Beta: Added French translation. Updated HandBrake core to SVN 5614. Fixed crash in locales with , as the decimal marker. Fixed a few warnings for compression level and quality on audio encodings.Twitter image Downloader: Twitter Image Downloader 2 with Installer: Application file with Install shield and Dot Net 4.0 redistributableUltimate Music Tagger: Ultimate Music Tagger 1.0.0.0: First release of Ultimate Music TaggerBlackJumboDog: Ver5.9.2: 2013.06.28 Ver5.9.2 (1) ??????????(????SMTP?????)?????????? (2) HTTPS???????????Outlook 2013 Add-In: Configuration Form: This new version includes the following changes: - Refactored code a bit. - Removing configuration from main form to gain more space to display items. - Moved configuration to separate form. You can click the little "gear" icon to access the configuration form (still very simple). - Added option to show past day appointments from the selected day (previous in time, that is). - Added some tooltips. You will have to uninstall the previous version (add/remove programs) if you had installed it ...Terminals: Version 3.0 - Release: Changes since version 2.0:Choose 100% portable or installed version Removed connection warning when running RDP 8 (Windows 8) client Fixed Active directory search Extended Active directory search by LDAP filters Fixed single instance mode when running on Windows Terminal server Merged usage of Tags and Groups Added columns sorting option in tables No UAC prompts on Windows 7 Completely new file persistence data layer New MS SQL persistence layer (Store data in SQL database)...NuGet: NuGet 2.6: Released June 26, 2013. Release notes: http://docs.nuget.org/docs/release-notes/nuget-2.6Python Tools for Visual Studio: 2.0 Beta: We’re pleased to announce the release of Python Tools for Visual Studio 2.0 Beta. Python Tools for Visual Studio (PTVS) is an open-source plug-in for Visual Studio which supports programming with the Python language. PTVS supports a broad range of features including CPython/IronPython, Edit/Intellisense/Debug/Profile, Cloud, HPC, IPython, and cross platform debugging support. For a quick overview of the general IDE experience, please watch this video: http://www.youtube.com/watch?v=TuewiStN...Player Framework by Microsoft: Player Framework for Windows 8 and WP8 (v1.3 beta): Preview: New MPEG DASH adaptive streaming plugin for Windows Azure Media Services Preview: New Ultraviolet CFF plugin. Preview: New WP7 version with WP8 compatibility. (source code only) Source code is now available via CodePlex Git Misc bug fixes and improvements: WP8 only: Added optional fullscreen and mute buttons to default xaml JS only: protecting currentTime from returning infinity. Some videos would cause currentTime to be infinity which could cause errors in plugins expectin...AssaultCube Reloaded: 2.5.8: SERVER OWNERS: note that the default maprot has changed once again. Linux has Ubuntu 11.10 32-bit precompiled binaries and Ubuntu 10.10 64-bit precompiled binaries, but you can compile your own as it also contains the source. If you are using Mac or other operating systems, please wait while we continue to try to package for those OSes. Or better yet, try to compile it. If it fails, download a virtual machine. The server pack is ready for both Windows and Linux, but you might need to compi...Compare .NET Objects: Version 1.7.2.0: If you like it, please rate it. :) Performance Improvements Fix for deleted row in a data table Added ability to ignore the collection order Fix for Ignoring by AttributesMicrosoft Ajax Minifier: Microsoft Ajax Minifier 4.95: update parser to allow for CSS3 calc( function to nest. add recognition of -pponly (Preprocess-Only) switch in AjaxMinManifestTask build task. Fix crashing bug in EXE when processing a manifest file using the -xml switch and an error message needs to be displayed (like a missing input file). Create separate Clean and Bundle build tasks for working with manifest files (AjaxMinManifestCleanTask and AjaxMinBundleTask). Removed the IsCleanOperation from AjaxMinManifestTask -- use AjaxMinMan...VG-Ripper & PG-Ripper: VG-Ripper 2.9.44: changes NEW: Added Support for "ImgChili.net" links FIXED: Auto UpdaterDocument.Editor: 2013.25: What's new for Document.Editor 2013.25: Improved Spell Check support Improved User Interface Minor Bug Fix's, improvements and speed upsCY_MVC: sample 1.0: sample 1.0WPF Composites: Version 4.3.0: In this Beta release, I broke my code out into two separate projects. There is a core FasterWPF.dll with the minimal required functionality. This can run with only the Aero.dll and the Rx .dll's. Then, I have a FasterWPFExtras .dll that requires and supports the Extended WPF Toolkit™ Community Edition V 1.9.0 (including Xceed DataGrid) and the Thriple .dll. This is for developers who want more . . . Finally, you may notice the other OPTIONAL .dll's available in the download such as the Dyn...Channel9's Absolute Beginner Series: Windows Phone 8: Entire source code for the Channel 9 series, Windows Phone 8 Development for Absolute Beginners.Indent Guides for Visual Studio: Indent Guides v13: ImportantThis release does not support Visual Studio 2010. The latest stable release for VS 2010 is v12.1. Version History Changed in v13 Added page width guide lines Added guide highlighting options Fixed guides appearing over collapsed blocks Fixed guides not appearing in newly opened files Fixed some potential crashes Fixed lines going through pragma statements Various updates for VS 2012 and VS 2013 Removed VS 2010 support Changed in v12.1: Fixed crash when unable to start...New Projects2d Minecraft Skin Assembler: 2d Minecraft skin assembler downloads a copy of a Minecraft player skin and rearranges the various parts.Arduino Template Express: Arduino Template Express (ATE) provides a wizard driven approach to the creation of libraries and sketches for multiple Arduino development boards. ATE is the ASP.NET Identity / Membership Database (SSDT): Web application membership database seed project which can be used to bootstrap your custom ASP.NET Identity / Membership solutionC# Lite Framework: C# Lite Framework CSCore: .NET Audio libraryGraph based image segmentation: This is an parallel implementation of graph based image segmentation algorithm.Indico Automatic Downloader: Automatically download new files in an Indico agenda. Runs every 5 minuets, and pulls down changes. Hopefully, no more having to click to get latest version!l5lab: some code practiseLAPR4: Academic project in the scope of "Laboratory / Project 4" (2nd year of Informatics Engineering). This is a fork of CleanSheets.NH-New: This is a ample projectogloszenia: projekt na bazy dancyhpev - A managed PE file viewer: pev - A managed PE file viewer TidyVidBack - a video background, responsive skin for DNN / DotNetNuke: This is a full-screen video background, responsive skin design for use in DNN - DotNetNuke based on Adammer's Tidy Skin.

    Read the article

  • Failing Sata HDD

    - by DaveCol
    I think my HDD is fried... Could someone confirm or help me restore it? I was using Hardware RAID 1 Configuration [2 x 160GB SATA HDD] on a CentOS 4 Installation. All of a sudden I started seeing bad sectors on the second HDD which stopped being mirrored. I have removed the RAID array and have tested with SMART which showed the following error: 187 Unknown_Attribute 0x003a 001 001 051 Old_age Always FAILING_NOW 4645 I have no clue what this means, or if I can recover from it. Could someone give me some ideas on how to fix this, or what HDD to get to replace this? Complete SMART report: Smartctl version 5.33 [i686-redhat-linux-gnu] Copyright (C) 2002-4 Bruce Allen Home page is http://smartmontools.sourceforge.net/ === START OF INFORMATION SECTION === Device Model: GB0160CAABV Serial Number: 6RX58NAA Firmware Version: HPG1 User Capacity: 160,041,885,696 bytes Device is: Not in smartctl database [for details use: -P showall] ATA Version is: 7 ATA Standard is: ATA/ATAPI-7 T13 1532D revision 4a Local Time is: Tue Oct 19 13:42:42 2010 COT SMART support is: Available - device has SMART capability. SMART support is: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED See vendor-specific Attribute list for marginal Attributes. General SMART Values: Offline data collection status: (0x82) Offline data collection activity was completed without error. Auto Offline Data Collection: Enabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 433) seconds. Offline data collection capabilities: (0x5b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 54) minutes. SMART Attributes Data Structure revision number: 10 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x000f 100 253 006 Pre-fail Always - 0 3 Spin_Up_Time 0x0002 097 097 000 Old_age Always - 0 4 Start_Stop_Count 0x0033 100 100 020 Pre-fail Always - 152 5 Reallocated_Sector_Ct 0x0033 095 095 036 Pre-fail Always - 214 7 Seek_Error_Rate 0x000f 078 060 030 Pre-fail Always - 73109713 9 Power_On_Hours 0x0032 083 083 000 Old_age Always - 15133 10 Spin_Retry_Count 0x0013 100 100 097 Pre-fail Always - 0 12 Power_Cycle_Count 0x0033 100 100 020 Pre-fail Always - 154 184 Unknown_Attribute 0x0032 038 038 000 Old_age Always - 62 187 Unknown_Attribute 0x003a 001 001 051 Old_age Always FAILING_NOW 4645 189 Unknown_Attribute 0x0022 100 100 000 Old_age Always - 0 190 Unknown_Attribute 0x001a 061 055 000 Old_age Always - 656408615 194 Temperature_Celsius 0x0000 039 045 000 Old_age Offline - 39 (Lifetime Min/Max 0/22) 195 Hardware_ECC_Recovered 0x0032 070 059 000 Old_age Always - 12605265 197 Current_Pending_Sector 0x0000 100 100 000 Old_age Offline - 1 198 Offline_Uncorrectable 0x0000 100 100 000 Old_age Offline - 0 199 UDMA_CRC_Error_Count 0x0000 200 200 000 Old_age Offline - 62 SMART Error Log Version: 1 ATA Error Count: 4645 (device log contains only the most recent five errors) CR = Command Register [HEX] FR = Features Register [HEX] SC = Sector Count Register [HEX] SN = Sector Number Register [HEX] CL = Cylinder Low Register [HEX] CH = Cylinder High Register [HEX] DH = Device/Head Register [HEX] DC = Device Command Register [HEX] ER = Error register [HEX] ST = Status register [HEX] Powered_Up_Time is measured from power on, and printed as DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, SS=sec, and sss=millisec. It "wraps" after 49.710 days. Error 4645 occurred at disk power-on lifetime: 15132 hours (630 days + 12 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 51 00 7b 86 b1 ea Error: UNC at LBA = 0x0ab1867b = 179406459 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- c8 00 02 7b 86 b1 ea 00 00:38:52.796 READ DMA ec 03 45 00 00 00 a0 00 00:38:52.796 IDENTIFY DEVICE ef 03 45 00 00 00 a0 00 00:38:52.794 SET FEATURES [Set transfer mode] ec 00 00 7b 86 b1 a0 00 00:38:49.991 IDENTIFY DEVICE c8 00 04 79 86 b1 ea 00 00:38:49.935 READ DMA Error 4644 occurred at disk power-on lifetime: 15132 hours (630 days + 12 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 51 00 7b 86 b1 ea Error: UNC at LBA = 0x0ab1867b = 179406459 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- c8 00 04 79 86 b1 ea 00 00:38:41.517 READ DMA ec 03 45 00 00 00 a0 00 00:38:41.515 IDENTIFY DEVICE ef 03 45 00 00 00 a0 00 00:38:41.515 SET FEATURES [Set transfer mode] ec 00 00 7b 86 b1 a0 00 00:38:49.991 IDENTIFY DEVICE c8 00 06 77 86 b1 ea 00 00:38:49.935 READ DMA Error 4643 occurred at disk power-on lifetime: 15132 hours (630 days + 12 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 51 00 7b 86 b1 ea Error: UNC at LBA = 0x0ab1867b = 179406459 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- c8 00 06 77 86 b1 ea 00 00:38:41.517 READ DMA ec 03 45 00 00 00 a0 00 00:38:41.515 IDENTIFY DEVICE ef 03 45 00 00 00 a0 00 00:38:41.515 SET FEATURES [Set transfer mode] ec 00 00 7b 86 b1 a0 00 00:38:41.513 IDENTIFY DEVICE c8 00 06 77 86 b1 ea 00 00:38:38.706 READ DMA Error 4642 occurred at disk power-on lifetime: 15132 hours (630 days + 12 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 51 00 7b 86 b1 ea Error: UNC at LBA = 0x0ab1867b = 179406459 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- c8 00 06 77 86 b1 ea 00 00:38:41.517 READ DMA ec 03 45 00 00 00 a0 00 00:38:41.515 IDENTIFY DEVICE ef 03 45 00 00 00 a0 00 00:38:41.515 SET FEATURES [Set transfer mode] ec 00 00 7b 86 b1 a0 00 00:38:41.513 IDENTIFY DEVICE c8 00 06 77 86 b1 ea 00 00:38:38.706 READ DMA Error 4641 occurred at disk power-on lifetime: 15132 hours (630 days + 12 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 51 00 7b 86 b1 ea Error: UNC at LBA = 0x0ab1867b = 179406459 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- c8 00 06 77 86 b1 ea 00 00:38:41.517 READ DMA ec 03 45 00 00 00 a0 00 00:38:41.515 IDENTIFY DEVICE ef 03 45 00 00 00 a0 00 00:38:41.515 SET FEATURES [Set transfer mode] ec 00 00 7b 86 b1 a0 00 00:38:41.513 IDENTIFY DEVICE c8 00 06 77 86 b1 ea 00 00:38:38.706 READ DMA SMART Self-test log structure revision number 1 Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Short offline Completed without error 00% 15131 - # 2 Short offline Completed without error 00% 15131 - SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay.

    Read the article

  • Hard Disk DRDY error: is it a crash

    - by pranjal
    I am using IBM Thinkpad, 1.7GHz, 512 RAM with Linux Mint 9 installed. I have two partitions in addition to root. One of the partitions became read-only yesterday, after which I rebooted my system. It is extremely slow along with DRDY Error : Is my Hard disk crashed ? Error Log while booting. Differences between boot sector and its backup. failed command : READ DMA BMDMA : stat 0X25 ata 1.00 : status : { DRDY ERR } ata 1.00 : status :{ UNC } Buffer I/O error on logical device, logical block 65467 smartctl output for the partition: mint mint # smartctl -a /dev/sda1 smartctl version 5.38 [i686-pc-linux-gnu] Copyright (C) 2002-8 Bruce Allen Home page is http://smartmontools.sourceforge.net/ === START OF INFORMATION SECTION === Device Model: TOSHIBA MK4026GAX RoHS Serial Number: X5LY1623T Firmware Version: PA107E User Capacity: 40,007,761,920 bytes Device is: Not in smartctl database [for details use: -P showall] ATA Version is: 6 ATA Standard is: Exact ATA specification draft version not indicated Local Time is: Thu Feb 17 06:48:25 2011 UTC SMART support is: Available - device has SMART capability. SMART support is: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x84) Offline data collection activity was suspended by an interrupting command from host. Auto Offline Data Collection: Enabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 153) seconds. Offline data collection capabilities: (0x1b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. No Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. No General Purpose Logging support. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 30) minutes. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x000b 100 100 050 Pre-fail Always - 0 2 Throughput_Performance 0x0005 100 100 050 Pre-fail Offline - 0 3 Spin_Up_Time 0x0027 100 100 001 Pre-fail Always - 310 4 Start_Stop_Count 0x0032 100 100 000 Old_age Always - 3968 5 Reallocated_Sector_Ct 0x0033 100 100 050 Pre-fail Always - 40 7 Seek_Error_Rate 0x000b 100 100 050 Pre-fail Always - 0 8 Seek_Time_Performance 0x0005 100 100 050 Pre-fail Offline - 0 9 Power_On_Hours 0x0032 082 082 000 Old_age Always - 7257 10 Spin_Retry_Count 0x0033 179 100 030 Pre-fail Always - 0 12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 3484 192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always - 489 193 Load_Cycle_Count 0x0032 064 064 000 Old_age Always - 367150 194 Temperature_Celsius 0x0022 100 100 000 Old_age Always - 36 (Lifetime Min/Max 14/57) 196 Reallocated_Event_Count 0x0032 100 100 000 Old_age Always - 33 197 Current_Pending_Sector 0x0032 100 100 000 Old_age Always - 82 198 Offline_Uncorrectable 0x0030 100 100 000 Old_age Offline - 1 199 UDMA_CRC_Error_Count 0x0032 200 253 000 Old_age Always - 0 220 Disk_Shift 0x0002 100 100 000 Old_age Always - 101 222 Loaded_Hours 0x0032 085 085 000 Old_age Always - 6146 223 Load_Retry_Count 0x0032 100 100 000 Old_age Always - 0 224 Load_Friction 0x0022 100 100 000 Old_age Always - 0 226 Load-in_Time 0x0026 100 100 000 Old_age Always - 227 240 Head_Flying_Hours 0x0001 100 100 001 Pre-fail Offline - 0 SMART Error Log Version: 1 ATA Error Count: 2371 (device log contains only the most recent five errors) CR = Command Register [HEX] FR = Features Register [HEX] SC = Sector Count Register [HEX] SN = Sector Number Register [HEX] CL = Cylinder Low Register [HEX] CH = Cylinder High Register [HEX] DH = Device/Head Register [HEX] DC = Device Command Register [HEX] ER = Error register [HEX] ST = Status register [HEX] Powered_Up_Time is measured from power on, and printed as DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, SS=sec, and sss=millisec. It "wraps" after 49.710 days. Error 2371 occurred at disk power-on lifetime: 7256 hours (302 days + 8 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 51 05 1a 1b 00 e0 Error: UNC 5 sectors at LBA = 0x00001b1a = 6938 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- c8 00 05 1a 1b 00 e0 00 00:03:10.061 READ DMA f8 00 00 00 00 00 e0 00 00:03:10.061 READ NATIVE MAX ADDRESS ec 00 00 00 00 00 a0 02 00:03:10.053 IDENTIFY DEVICE ef 03 45 00 00 00 a0 02 00:03:10.053 SET FEATURES [Set transfer mode] f8 00 00 00 00 00 e0 00 00:03:10.053 READ NATIVE MAX ADDRESS Error 2370 occurred at disk power-on lifetime: 7256 hours (302 days + 8 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 51 05 1a 1b 00 e0 Error: UNC 5 sectors at LBA = 0x00001b1a = 6938 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- c8 00 05 1a 1b 00 e0 00 00:03:03.328 READ DMA f8 00 00 00 00 00 e0 00 00:03:03.327 READ NATIVE MAX ADDRESS ec 00 00 00 00 00 a0 02 00:03:03.320 IDENTIFY DEVICE ef 03 45 00 00 00 a0 02 00:03:03.319 SET FEATURES [Set transfer mode] f8 00 00 00 00 00 e0 00 00:03:03.319 READ NATIVE MAX ADDRESS Error 2369 occurred at disk power-on lifetime: 7256 hours (302 days + 8 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 51 05 1a 1b 00 e0 Error: UNC 5 sectors at LBA = 0x00001b1a = 6938 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- c8 00 05 1a 1b 00 e0 00 00:02:56.582 READ DMA f8 00 00 00 00 00 e0 00 00:02:56.582 READ NATIVE MAX ADDRESS ec 00 00 00 00 00 a0 02 00:02:56.574 IDENTIFY DEVICE ef 03 45 00 00 00 a0 02 00:02:56.574 SET FEATURES [Set transfer mode] f8 00 00 00 00 00 e0 00 00:02:56.574 READ NATIVE MAX ADDRESS Error 2368 occurred at disk power-on lifetime: 7256 hours (302 days + 8 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 51 05 1a 1b 00 e0 Error: UNC 5 sectors at LBA = 0x00001b1a = 6938 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- c8 00 05 1a 1b 00 e0 00 00:02:49.809 READ DMA f8 00 00 00 00 00 e0 00 00:02:49.809 READ NATIVE MAX ADDRESS ec 00 00 00 00 00 a0 02 00:02:49.801 IDENTIFY DEVICE ef 03 45 00 00 00 a0 02 00:02:49.801 SET FEATURES [Set transfer mode] f8 00 00 00 00 00 e0 00 00:02:49.801 READ NATIVE MAX ADDRESS Error 2367 occurred at disk power-on lifetime: 7256 hours (302 days + 8 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 51 05 1a 1b 00 e0 Error: UNC 5 sectors at LBA = 0x00001b1a = 6938 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- c8 00 05 1a 1b 00 e0 00 00:02:43.056 READ DMA f8 00 00 00 00 00 e0 00 00:02:43.056 READ NATIVE MAX ADDRESS ec 00 00 00 00 00 a0 02 00:02:43.048 IDENTIFY DEVICE ef 03 45 00 00 00 a0 02 00:02:43.048 SET FEATURES [Set transfer mode] f8 00 00 00 00 00 e0 00 00:02:43.047 READ NATIVE MAX ADDRESS SMART Self-test log structure revision number 1 No self-tests have been logged. [To run self-tests, use: smartctl -t] Device does not support Selective Self Tests/Logging Do I need to get a new Hard Disk my PC ?

    Read the article

  • validating an XML schema with empty attributes

    - by AdRock
    I am having trouble validating my xml schema. I get these errors on the schema 113: 18 s4s-elt-invalid-content.1: The content of '#AnonType_user' is invalid. 164: 17 s4s-elt-invalid-content.1: The content of '#AnonType_festival' is invalid. Element 'sequence' is invalid, misplaced, or occurs too often. and becuase of those 2 errors, i am getting loads of the same error. This is becuase the attribute id of the festival tag may be empty becuase there is not data for that festival cvc-datatype-valid.1.2.1: '' is not a valid value for 'integer'. cvc-attribute.3: The value '' of attribute 'id' on element 'festival' is not valid with respect to its type, 'integer'. The lines in the schema causing the problems are <xs:element name="user"> <xs:complexType> <xs:attribute name="id" type="xs:integer"/> <xs:sequence> <xs:element ref="personal"/> <xs:element ref="account"/> </xs:sequence> </xs:complexType> </xs:element> <xs:element name="festival"> <xs:complexType> <xs:attribute name="id" type="xs:integer" user="optional"/> <xs:sequence> <xs:element ref="event"/> <xs:element ref="contact"/> </xs:sequence> </xs:complexType> </xs:element> This is a snippet from my XML file. One user has a festival and the other doesn't <member> <user id="3"> <personal> <name>Skye Saunders</name> <sex>Female</sex> <address1>31 Anns Court</address1> <address2></address2> <city>Cirencester</city> <county>Gloucestershire</county> <postcode>GL7 1JG</postcode> <telephone>01958303514</telephone> <mobile>07260491667</mobile> <email>[email protected]</email> </personal> <account> <username>BigUndecided</username> <password>ea297847f80e046ca24a8621f4068594</password> <userlevel>2</userlevel> <signupdate>2010-03-26T09:23:50</signupdate> </account> </user> <festival id=""> <event> <eventname></eventname> <url></url> <datefrom></datefrom> <dateto></dateto> <location></location> <eventpostcode></eventpostcode> <coords> <lat></lat> <lng></lng> </coords> </event> <contact> <conname></conname> <conaddress1></conaddress1> <conaddress2></conaddress2> <concity></concity> <concounty></concounty> <conpostcode></conpostcode> <contelephone></contelephone> <conmobile></conmobile> <fax></fax> <conemail></conemail> </contact> </festival> </member> <member> <user id="4"> <personal> <name>Connor Lawson</name> <sex>Male</sex> <address1>12 Ash Way</address1> <address2></address2> <city>Swindon</city> <county>Wiltshire</county> <postcode>SN3 6GS</postcode> <telephone>01791928119</telephone> <mobile>07338695664</mobile> <email>[email protected]</email> </personal> <account> <username>iTuneStinker</username> <password>3a1f5fda21a07bfff20c41272bae7192</password> <userlevel>3</userlevel> <signupdate>2010-03-26T09:23:50</signupdate> </account> </user> <festival id="1"> <event> <eventname>Oxford Folk Festival</eventname> <url>http://www.oxfordfolkfestival.com/</url> <datefrom>2010-04-07</datefrom> <dateto>2010-04-09</dateto> <location>Oxford</location> <eventpostcode>OX19BE</eventpostcode> <coords> <lat>51.735640</lat> <lng>-1.276136</lng> </coords> </event> <contact> <conname>Stuart Vincent</conname> <conaddress1>P.O. Box 642</conaddress1> <conaddress2></conaddress2> <concity>Oxford</concity> <concounty>Bedfordshire</concounty> <conpostcode>OX13BY</conpostcode> <contelephone>01865 79073</contelephone> <conmobile></conmobile> <fax></fax> <conemail>[email protected]</conemail> </contact> </festival> </member> This is my schema <?xml version="1.0" encoding="UTF-8"?> <xs:schema xmlns:xs="http://www.w3.org/2001/XMLSchema" elementFormDefault="qualified"> <xs:simpleType name="postcode"> <xs:restriction base="xs:string"> <xs:minLength value="6"/> <xs:maxLength value="8"/> </xs:restriction> </xs:simpleType> <xs:simpleType name="telephone"> <xs:restriction base="xs:string"> <xs:minLength value="10"/> <xs:maxLength value="13"/> </xs:restriction> </xs:simpleType> <xs:simpleType name="mobile"> <xs:restriction base="xs:string"> <xs:minLength value="11"/> <xs:maxLength value="11"/> </xs:restriction> </xs:simpleType> <xs:simpleType name="password"> <xs:restriction base="xs:string"> <xs:minLength value="32"/> <xs:maxLength value="32"/> </xs:restriction> </xs:simpleType> <xs:simpleType name="userlevel"> <xs:restriction base="xs:integer"> <xs:enumeration value="1"/> <xs:enumeration value="2"/> <xs:enumeration value="3"/> <xs:enumeration value="4"/> </xs:restriction> </xs:simpleType> <xs:simpleType name="county"> <xs:restriction base="xs:string"> <xs:enumeration value="Bedfordshire"/> <xs:enumeration value="Berkshire"/> <xs:enumeration value="Bristol"/> <xs:enumeration value="Buckinghamshire"/> <xs:enumeration value="Cambridgeshire"/> <xs:enumeration value="Cheshire"/> <xs:enumeration value="Cleveland"/> <xs:enumeration value="Cornwall"/> <xs:enumeration value="Cumberland"/> <xs:enumeration value="Derbyshire"/> <xs:enumeration value="Devon"/> <xs:enumeration value="Dorset"/> <xs:enumeration value="Durham"/> <xs:enumeration value="East Ridings Of Yorkshire"/> <xs:enumeration value="Essex"/> <xs:enumeration value="Gloucestershire"/> <xs:enumeration value="Hampshire"/> <xs:enumeration value="Herefordshire"/> <xs:enumeration value="Hertfordshire"/> <xs:enumeration value="Huntingdonshire"/> <xs:enumeration value="Isle Of Man"/> <xs:enumeration value="Kent"/> <xs:enumeration value="Lancashire"/> <xs:enumeration value="Leicestershire"/> <xs:enumeration value="Lincolnshire"/> <xs:enumeration value="London"/> <xs:enumeration value="Middlesex"/> <xs:enumeration value="Norfolk"/> <xs:enumeration value="North Yorkshire"/> <xs:enumeration value="Northamptonshire"/> <xs:enumeration value="Northumberland"/> <xs:enumeration value="Nottinghamshire"/> <xs:enumeration value="Oxfordshire"/> <xs:enumeration value="Rutland"/> <xs:enumeration value="Shropshire"/> <xs:enumeration value="Somerset"/> <xs:enumeration value="South Yorkshire"/> <xs:enumeration value="Staffordshire"/> <xs:enumeration value="Suffolk"/> <xs:enumeration value="Surrey"/> <xs:enumeration value="Sussex"/> <xs:enumeration value="Tyne and Wear"/> <xs:enumeration value="Warwickshire"/> <xs:enumeration value="West Yorkshire"/> <xs:enumeration value="Westmorland"/> <xs:enumeration value="Wiltshire"/> <xs:enumeration value="Wirral"/> <xs:enumeration value="Worcestershire"/> <xs:enumeration value="Yorkshire"/> </xs:restriction> </xs:simpleType> <xs:element name="folktask"> <xs:complexType> <xs:sequence> <xs:element minOccurs="0" maxOccurs="unbounded" ref="member"/> </xs:sequence> </xs:complexType> </xs:element> <xs:element name="member"> <xs:complexType> <xs:sequence> <xs:element ref="user" minOccurs="0" maxOccurs="unbounded"/> <xs:element ref="festival" minOccurs="0" maxOccurs="unbounded"/> </xs:sequence> </xs:complexType> </xs:element> <xs:element name="user"> <xs:complexType> <xs:attribute name="id" type="xs:integer"/> <xs:sequence> <xs:element ref="personal"/> <xs:element ref="account"/> </xs:sequence> </xs:complexType> </xs:element> <xs:element name="personal"> <xs:complexType> <xs:sequence> <xs:element ref="name"/> <xs:element ref="sex"/> <xs:element ref="address1"/> <xs:element ref="address2"/> <xs:element ref="city"/> <xs:element ref="county"/> <xs:element ref="postcode"/> <xs:element ref="telephone"/> <xs:element ref="mobile"/> <xs:element ref="email"/> </xs:sequence> </xs:complexType> </xs:element> <xs:element name="name" type="xs:string"/> <xs:element name="sex" type="xs:string"/> <xs:element name="address1" type="xs:string"/> <xs:element name="address2" type="xs:string"/> <xs:element name="city" type="xs:string"/> <xs:element name="county" type="xs:string"/> <xs:element name="postcode" type="postcode"/> <xs:element name="telephone" type="telephone"/> <xs:element name="mobile" type="mobile"/> <xs:element name="email" type="xs:string"/> <xs:element name="account"> <xs:complexType> <xs:sequence> <xs:element ref="username"/> <xs:element ref="password"/> <xs:element ref="userlevel"/> <xs:element ref="signupdate"/> </xs:sequence> </xs:complexType> </xs:element> <xs:element name="username" type="xs:string"/> <xs:element name="password" type="password"/> <xs:element name="userlevel" type="userlevel"/> <xs:element name="signupdate" type="xs:dateTime"/> <xs:element name="festival"> <xs:complexType> <xs:attribute name="id" type="xs:integer" user="optional"/> <xs:sequence> <xs:element ref="event"/> <xs:element ref="contact"/> </xs:sequence> </xs:complexType> </xs:element> <xs:element name="event"> <xs:complexType> <xs:sequence> <xs:element ref="eventname"/> <xs:element ref="url"/> <xs:element ref="datefrom"/> <xs:element ref="dateto"/> <xs:element ref="location"/> <xs:element ref="eventpostcode"/> <xs:element ref="coords"/> </xs:sequence> </xs:complexType> </xs:element> <xs:element name="eventname" type="xs:string"/> <xs:element name="url" type="xs:string"/> <xs:element name="datefrom" type="xs:date"/> <xs:element name="dateto" type="xs:date"/> <xs:element name="location" type="xs:string"/> <xs:element name="eventpostcode" type="postcode"/> <xs:element name="coords"> <xs:complexType> <xs:sequence> <xs:element ref="lat"/> <xs:element ref="lng"/> </xs:sequence> </xs:complexType> </xs:element> <xs:element name="lat" type="xs:decimal"/> <xs:element name="lng" type="xs:decimal"/> <xs:element name="contact"> <xs:complexType> <xs:sequence> <xs:element ref="conname"/> <xs:element ref="conaddress1"/> <xs:element ref="conaddress2"/> <xs:element ref="concity"/> <xs:element ref="concounty"/> <xs:element ref="conpostcode"/> <xs:element ref="contelephone"/> <xs:element ref="conmobile"/> <xs:element ref="fax"/> <xs:element ref="conemail"/> </xs:sequence> </xs:complexType> </xs:element> <xs:element name="conname" type="xs:string"/> <xs:element name="conaddress1" type="xs:string"/> <xs:element name="conaddress2" type="xs:string"/> <xs:element name="concity" type="xs:string"/> <xs:element name="concounty" type="xs:string"/> <xs:element name="conpostcode" type="postcode"/> <xs:element name="contelephone" type="telephone"/> <xs:element name="conmobile" type="mobile"/> <xs:element name="fax" type="telephone"/> <xs:element name="conemail" type="xs:string"/> </xs:schema>

    Read the article

  • Simple Grouping With TableSorter Plugin

    - by HurnsMobile
    Im playing around with the Tablesorter plug-in for jQuery and was trying to get a very simple grouping functionality added into it. Using the follow html/js works great until you click sort again and reverse the order. The headers get moved to the bottom of the group when this happens. The following is my (admitedly hacky) attempt at it. Does anyone have any ideas? <html> <head> <meta http-equiv="Content-Type" content="text/html; charset=iso-8859-1" /> <title>Table Manipulation Test</title> <link type="text/css" href="css/ui-lightness/jquery-ui-1.8.1.custom.css" rel="stylesheet" /> <link rel="stylesheet" href="tablesorter/themes/green/style.css" type="text/css"/> <script type="text/javascript" src="js/jquery-1.4.2.min.js"></script> <script type="text/javascript" src="js/jquery-ui-1.8.1.custom.min.js"></script> <script type="text/javascript" src="tablesorter/jquery.tablesorter.min.js"></script> <script type="text/javascript"> $(document).ready(function() { $("#test_table").tablesorter({ sortForce: [[3,0]] }); $(".group_details").hide(); $(".group_header").click(function(){ var group = $(this).attr("group"); var $expander = $(this).children("td.expanderguy") if ($("." + group + ":visible").length){ $("." + group + "").fadeOut('fast'); $expander.html("<img src='icons/plus.gif'>"); } else{ $("." + group + "").fadeIn('fast'); $expander.html("<img src='icons/minus.gif'>"); } }); } ); </script> <style type="text/css"> .group_header td{ background-color: #888888; !important } </style> </head> <body> <table id="test_table" class="tablesorter"> <thead> <tr><th>First Name</th><th>Last Name</th><th>Email</th><th>Due Date</th><th>Amount Due</th></tr> </thead> <tbody> <tr class="group_header" group="group1"><td class="expanderguy"><img src="icons/plus.gif"></td><td></td><td></td><td>Monday, June 7</td><td></td></tr> <tr class="group_details group1"><td>Flavian</td><td>Wenceslas</td><td>[email protected]</td><td>Monday, June 7</td><td>$100</td></tr> <tr class="group_details group1"><td>Gordian</td><td>Ives</td><td>[email protected]</td><td>Monday, June 7</td><td>$1700</td></tr> <tr class="group_details group1"><td>Saladin</td><td>Tarquin</td><td>[email protected]</td><td>Monday, June 7</td><td>$1700</td></tr> <tr class="group_details group1"><td>Urban</td><td>Cyprian</td><td>[email protected]</td><td>Monday, June 7</td><td>$1500</td></tr> <tr class="group_details group1"><td>Sargon</td><td>Swithun</td><td>[email protected]</td><td>Monday, June 7</td><td>$1100</td></tr> <tr class="group_details group1"><td>Pompey</td><td>Ladislas</td><td>[email protected]</td><td>Monday, June 7</td><td>$300</td></tr> <tr class="group_details group1"><td>Attila</td><td>Hiawatha</td><td>[email protected]</td><td>Monday, June 7</td><td>$200</td></tr> <tr class="group_header" group="group2"><td class="expanderguy"><img src="icons/plus.gif"></td><td></td><td></td><td>Tuesday, June 8</td><td></td></tr> <tr class="group_details group2"><td>Bruce</td><td>Fenton</td><td>[email protected]</td><td>Tuesday, June 8</td><td>$1700</td></tr> <tr class="group_details group2"><td>Wade</td><td>Sequoia</td><td>[email protected]</td><td>Tuesday, June 8</td><td>$1400</td></tr> <tr class="group_details group2"><td>Eddie</td><td>Jerold</td><td>[email protected]</td><td>Tuesday, June 8</td><td>$1100</td></tr> <tr class="group_details group2"><td>Lynn</td><td>Lucan</td><td>[email protected]</td><td>Tuesday, June 8</td><td>$1200</td></tr> <tr class="group_details group2"><td>Taegan</td><td>Tadg</td><td>[email protected]</td><td>Tuesday, June 8</td><td>$100</td></tr> <tr class="group_details group2"><td>Clyde</td><td>Reed</td><td>[email protected]</td><td>Tuesday, June 8</td><td>$6100</td></tr> <tr class="group_details group2"><td>Alaois</td><td>Art</td><td>[email protected]</td><td>Tuesday, June 8</td><td>$2100</td></tr> <tr class="group_details group2"><td>Gilbert</td><td>Patsy</td><td>[email protected]</td><td>Tuesday, June 8</td><td>$1500</td></tr> <tr class="group_header" group="group3"><td class="expanderguy"><img src="icons/plus.gif"></td><td></td><td></td><td>Wednesday, June 9</td><td></td></tr> <tr class="group_details group3" ><td>Clem</td><td>Eben</td><td>[email protected]</td><td>Wednesday, June 9</td><td>$2100</td></tr> <tr class="group_details group3" ><td>Elijah</td><td>Julyan</td><td>[email protected]</td><td>Wednesday, June 9</td><td>$2100</td></tr> <tr class="group_details group3" ><td>Marvyn</td><td>Damian</td><td>[email protected]</td><td>Wednesday, June 9</td><td>$1100</td></tr> <tr class="group_details group3" ><td>Sawyer</td><td>Ryker</td><td>[email protected]</td><td>Wednesday, June 9</td><td>$500</td></tr> </tbody> </table> </body>

    Read the article

  • How to group using XSLT

    - by AdRock
    I'm having trouble grouping a set of nodes. I've found an article that does work with grouping and i have tested it and it works on a small test stylesheet i have I now need to use it in my stylesheet where I only want to select node sets that have a specific value. What I want to do in my stylesheet is select all users who have a userlevel of 2 then to group them by the volunteer region. What happens at the minute is that it gets the right amount of users with userlevel 2 but doesn't print them. It just repeats the first user in the xml file. <?xml version="1.0" encoding="ISO-8859-1"?> <xsl:stylesheet version="1.0" xmlns:xsl="http://www.w3.org/1999/XSL/Transform"> <xsl:key name="volunteers-by-region" match="volunteer" use="region" /> <xsl:template name="hoo" match="/"> <html> <head> <title>Registered Volunteers</title> <link rel="stylesheet" type="text/css" href="volunteer.css" /> </head> <body> <h1>Registered Volunteers</h1> <h3>Ordered by the username ascending</h3> <xsl:for-each select="folktask/member[user/account/userlevel='2']"> <xsl:for-each select="volunteer[count(. | key('volunteers-by-region', region)[1]) = 1]"> <xsl:sort select="region" /> <xsl:for-each select="key('volunteers-by-region', region)"> <xsl:sort select="folktask/member/user/personal/name" /> <div class="userdiv"> <xsl:call-template name="member_userid"> <xsl:with-param name="myid" select="/folktask/member/user/@id" /> </xsl:call-template> <xsl:call-template name="volunteer_volid"> <xsl:with-param name="volid" select="/folktask/member/volunteer/@id" /> </xsl:call-template> <xsl:call-template name="volunteer_role"> <xsl:with-param name="volrole" select="/folktask/member/volunteer/roles" /> </xsl:call-template> <xsl:call-template name="volunteer_region"> <xsl:with-param name="volloc" select="/folktask/member/volunteer/region" /> </xsl:call-template> </div> </xsl:for-each> </xsl:for-each> </xsl:for-each> <xsl:if test="position()=last()"> <div class="count"><h2>Total number of volunteers: <xsl:value-of select="count(/folktask/member/user/account/userlevel[text()=2])"/></h2></div> </xsl:if> </body> </html> </xsl:template> <xsl:template name="member_userid"> <xsl:param name="myid" select="'Not Available'" /> <div class="heading bold"><h2>USER ID: <xsl:value-of select="$myid" /></h2></div> </xsl:template> <xsl:template name="volunteer_volid"> <xsl:param name="volid" select="'Not Available'" /> <div class="heading2 bold"><h2>VOLUNTEER ID: <xsl:value-of select="$volid" /></h2></div> </xsl:template> <xsl:template name="volunteer_role"> <xsl:param name="volrole" select="'Not Available'" /> <div class="small bold">ROLES:</div> <div class="large"> <xsl:choose> <xsl:when test="string-length($volrole)!=0"> <xsl:value-of select="$volrole" /> </xsl:when> <xsl:otherwise> <xsl:text> </xsl:text> </xsl:otherwise> </xsl:choose> </div> </xsl:template> <xsl:template name="volunteer_region"> <xsl:param name="volloc" select="'Not Available'" /> <div class="small bold">REGION:</div> <div class="large"><xsl:value-of select="$volloc" /></div> </xsl:template> </xsl:stylesheet> here is my full xml file <?xml version="1.0" encoding="ISO-8859-1" ?> <?xml-stylesheet type="text/xsl" href="volunteers.xsl"?> <folktask xmlns:xs="http://www.w3.org/2001/XMLSchema-instance" xs:noNamespaceSchemaLocation="folktask.xsd"> <member> <user id="1"> <personal> <name>Abbie Hunt</name> <sex>Female</sex> <address1>108 Access Road</address1> <address2></address2> <city>Wells</city> <county>Somerset</county> <postcode>BA5 8GH</postcode> <telephone>01528927616</telephone> <mobile>07085252492</mobile> <email>[email protected]</email> </personal> <account> <username>AdRock</username> <password>269eb625e2f0cf6fae9a29434c12a89f</password> <userlevel>4</userlevel> <signupdate>2010-03-26T09:23:50</signupdate> </account> </user> <volunteer id="1"> <roles></roles> <region>South West</region> </volunteer> </member> <member> <user id="2"> <personal> <name>Aidan Harris</name> <sex>Male</sex> <address1>103 Aiken Street</address1> <address2></address2> <city>Chichester</city> <county>Sussex</county> <postcode>PO19 4DS</postcode> <telephone>01905149894</telephone> <mobile>07784467941</mobile> <email>[email protected]</email> </personal> <account> <username>AmbientExpert</username> <password>8e64214160e9dd14ae2a6d9f700004a6</password> <userlevel>2</userlevel> <signupdate>2010-03-26T09:23:50</signupdate> </account> </user> <volunteer id="2"> <roles>Van Driver,gas Fitter</roles> <region>South Central</region> </volunteer> </member> <member> <user id="3"> <personal> <name>Skye Saunders</name> <sex>Female</sex> <address1>31 Anns Court</address1> <address2></address2> <city>Cirencester</city> <county>Gloucestershire</county> <postcode>GL7 1JG</postcode> <telephone>01958303514</telephone> <mobile>07260491667</mobile> <email>[email protected]</email> </personal> <account> <username>BigUndecided</username> <password>ea297847f80e046ca24a8621f4068594</password> <userlevel>2</userlevel> <signupdate>2010-03-26T09:23:50</signupdate> </account> </user> <volunteer id="3"> <roles>Scaffold Erector</roles> <region>South West</region> </volunteer> </member> <member> <user id="4"> <personal> <name>Connor Lawson</name> <sex>Male</sex> <address1>12 Ash Way</address1> <address2></address2> <city>Swindon</city> <county>Wiltshire</county> <postcode>SN3 6GS</postcode> <telephone>01791928119</telephone> <mobile>07338695664</mobile> <email>[email protected]</email> </personal> <account> <username>iTuneStinker</username> <password>3a1f5fda21a07bfff20c41272bae7192</password> <userlevel>3</userlevel> <signupdate>2010-03-26T09:23:50</signupdate> </account> </user> <festival id="1"> <event> <eventname>Oxford Folk Festival</eventname> <url>http://www.oxfordfolkfestival.com/</url> <datefrom>2010-04-07</datefrom> <dateto>2010-04-09</dateto> <location>Oxford</location> <eventpostcode>OX1 9BE</eventpostcode> <additional>Oxford Folk Festival is going into it's third year in 2006. As well as needing volunteers to steward for the event on the weekend itself, we would be delighted to hear from people willing to help in year round festival work such as stuffing envelopes for mailings, poster and leaflet distribution, and stewarding duties at festival pre-events.</additional> <coords> <lat>51.735640</lat> <lng>-1.276136</lng> </coords> </event> <contact> <conname>Stuart Vincent</conname> <conaddress1>P.O. Box 642</conaddress1> <conaddress2></conaddress2> <concity>Oxford</concity> <concounty>Bedfordshire</concounty> <conpostcode>OX1 3BY</conpostcode> <contelephone>01865 79073</contelephone> <conmobile></conmobile> <fax></fax> <conemail>[email protected]</conemail> </contact> </festival> </member> <member> <user id="5"> <personal> <name>Lewis King</name> <sex>Male</sex> <address1>67 Arbors Way</address1> <address2></address2> <city>Sherborne</city> <county>Dorset</county> <postcode>DT9 0GS</postcode> <telephone>01446139701</telephone> <mobile>07292614033</mobile> <email>[email protected]</email> </personal> <account> <username>Runninglife</username> <password>98fab0a27c34ddb2b0618bc184d4331d</password> <userlevel>2</userlevel> <signupdate>2010-03-26T09:23:50</signupdate> </account> </user> <volunteer id="4"> <roles>Van Driver</roles> <region>South West</region> </volunteer> </member> <member> <user id="6"> <personal> <name>Cameron Lee</name> <sex>Male</sex> <address1>77 Arrington Road</address1> <address2></address2> <city>Solihull</city> <county>Warwickshire</county> <postcode>B90 6FG</postcode> <telephone>01435158624</telephone> <mobile>07789503179</mobile> <email>[email protected]</email> </personal> <account> <username>love2Mixer</username> <password>1df752d54876928639cea07ce036a9c0</password> <userlevel>2</userlevel> <signupdate>2010-03-26T09:23:50</signupdate> </account> </user> <volunteer id="5"> <roles>Fire Warden</roles> <region>Midlands</region> </volunteer> </member> <member> <user id="7"> <personal> <name>Lexie Dean</name> <sex>Female</sex> <address1>38 Bloomfield Court</address1> <address2></address2> <city>Windermere</city> <county>Westmorland</county> <postcode>LA23 8BM</postcode> <telephone>01781207188</telephone> <mobile>07127461231</mobile> <email>[email protected]</email> </personal> <account> <username>MailNetworker</username> <password>0e070701839e612bf46af4421db4f44b</password> <userlevel>3</userlevel> <signupdate>2010-03-26T09:23:50</signupdate> </account> </user> <festival id="2"> <event> <eventname>Middlewich Folk And Boat Festival</eventname> <url>http://midfest.org.uk/mfab/</url> <datefrom>2010-06-16</datefrom> <dateto>2010-06-18</dateto> <location>Middlewich</location> <eventpostcode>CW10 9BX</eventpostcode> <additional>We welcome stewards staying on campsite or boats.</additional> <coords> <lat>53.190562</lat> <lng>-2.444926</lng> </coords> </event> <contact> <conname>Festival Committee</conname> <conaddress1>PO Box 141</conaddress1> <conaddress2></conaddress2> <concity>Winsford</concity> <concounty>Cheshire</concounty> <conpostcode>CW10 9WB</conpostcode> <contelephone>07092 39050</contelephone> <conmobile>07092 39050</conmobile> <fax></fax> <conemail>[email protected]</conemail> </contact> </festival> </member> <member> <user id="8"> <personal> <name>Liam Chapman</name> <sex>Male</sex> <address1>99 Black Water Drive</address1> <address2></address2> <city>St.Austell</city> <county>Cornwall</county> <postcode>PL25 3GF</postcode> <telephone>01835629418</telephone> <mobile>07695179069</mobile> <email>[email protected]</email> </personal> <account> <username>GreenWimp</username> <password>1fe3df99a841dc4f723d21af89e0990f</password> <userlevel>1</userlevel> <signupdate>2010-03-26T09:23:50</signupdate> </account> </user> </member> <member> <user id="9"> <personal> <name>Brandon Harrison</name> <sex>Male</sex> <address1>41 Arlington Way</address1> <address2></address2> <city>Dorchester</city> <county>Dorset</county> <postcode>DT1 3JS</postcode> <telephone>01293626735</telephone> <mobile>07277145760</mobile> <email>[email protected]</email> </personal> <account> <username>LovelyStar</username> <password>8b53b66f323aa5e6a083edb4fd44456b</password> <userlevel>1</userlevel> <signupdate>2010-03-26T09:23:50</signupdate> </account> </user> </member> <member> <user id="10"> <personal> <name>Samuel Young</name> <sex>Male</sex> <address1>102 Bailey Hill Road</address1> <address2></address2> <city>Wolverhampton</city> <county>Staffordshire</county> <postcode>WV7 8HS</postcode> <telephone>01594531382</telephone> <mobile>07544663654</mobile> <email>[email protected]</email> </personal> <account> <username>GuruSassy</username> <password>00da02da6c143c3d136bf60b8bfcf43e</password> <userlevel>2</userlevel> <signupdate>2010-03-26T09:23:50</signupdate> </account> </user> <volunteer id="6"> <roles>Fire Warden</roles> <region>Midlands</region> </volunteer> </member> <member> <user id="11"> <personal> <name>Alexander Harris</name> <sex>Male</sex> <address1>93 Beguine Drive</address1> <address2></address2> <city>Winchester</city> <county>Hampshire</county> <postcode>S23 2FD</postcode> <telephone>01452496582</telephone> <mobile>07353867291</mobile> <email>[email protected]</email> </personal> <account> <username>GuitarExpert</username> <password>0102ad3740028e155925e9918ead3bde</password> <userlevel>2</userlevel> <signupdate>2010-03-26T09:23:50</signupdate> </account> </user> <volunteer id="7"> <roles>Scaffold Erector</roles> <region>North East</region> </volunteer> </member> <member> <user id="12"> <personal> <name>Tyler Mcdonald</name> <sex>Male</sex> <address1>44 Baker Road</address1> <address2></address2> <city>Bromley</city> <county>Kent</county> <postcode>BR1 2GD</postcode> <telephone>01918704546</telephone> <mobile>07314062451</mobile> <email>[email protected]</email> </personal> <account> <username>WildWish</username> <password>073220bb5e9a12ad202bb7d94dcc86f7</password> <userlevel>1</userlevel> <signupdate>2010-03-26T09:23:50</signupdate> </account> </user> </member> <member> <user id="13"> <personal> <name>Skye Mason</name> <sex>Female</sex> <address1>56 Cedar Creek Church Road</address1> <address2></address2> <city>Bracknell</city> <county>Berkshire</county> <postcode>RG12 1AQ</postcode> <telephone>01787607618</telephone> <mobile>07540218868</mobile> <email>[email protected]</email> </personal> <account> <username>PizzaDork</username> <password>74c54937ee7051ee7f4ebc11296ed531</password> <userlevel>1</userlevel> <signupdate>2010-03-26T09:23:50</signupdate> </account> </user> </member> <member> <user id="14"> <personal> <name>Maryam Rose</name> <sex>Female</sex> <address1>98 Baptist Circle</address1> <address2></address2> <city>Newbury</city> <county>Berkshire</county> <postcode>RG14 8DF</postcode> <telephone>01691317999</telephone> <mobile>07212477154</mobile> <email>[email protected]</email> </personal> <account> <username>SexTech</username> <password>f1c21f9f1e999da97d7dc460bb876fcf</password> <userlevel>3</userlevel> <signupdate>2010-03-26T09:23:50</signupdate> </account> </user> <festival id="3"> <event> <eventname>Birdsedge Village Festival</eventname> <url>http://www.birdsedge.co.uk/</url> <datefrom>2010-07-08</datefrom> <dateto>2010-07-09</dateto> <location>Birdsedge</location> <eventpostcode>HD8 8XT</eventpostcode> <additional></additional> <coords> <lat>53.565644</lat> <lng>-1.696196</lng> </coords> </event> <contact> <conname>Jacey Bedford</conname> <conaddress1>Penistone Road</conaddress1> <conaddress2>Birdsedge</conaddress2> <concity>Huddersfield</concity> <concounty>West Yorkshire</concounty> <conpostcode>HD8 8XT</conpostcode> <contelephone>01484 60623</contelephone> <conmobile></conmobile> <fax></fax> <conemail>[email protected]</conemail> </contact> </festival> </member> <member> <user id="15"> <personal> <name>Lexie Rogers</name> <sex>Female</sex> <address1>38 Bishop Road</address1> <address2></address2> <city>Matlock</city> <county>Derbyshire</county> <postcode>DE4 1BX</postcode> <telephone>01961168823</telephone> <mobile>07170855351</mobile> <email>[email protected]</email> </personal> <account> <username>ShipBurglar</username> <password>cc190488a95667cb117e20bc6c7c330e</password> <userlevel>2</userlevel> <signupdate>2010-03-26T09:23:50</signupdate> </account> </user> <volunteer id="8"> <roles>Gas Fitter</roles> <region>Midlands</region> </volunteer> </member> <member> <user id="16"> <personal> <name>Noah Parker</name> <sex>Male</sex> <address1>112 Canty Road</address1> <address2></address2> <city>Keswick</city> <county>Cumberland</county> <postcode>CA12 4TR</postcode> <telephone>01931272522</telephone> <mobile>07610026576</mobile> <email>[email protected]</email> </personal> <account> <username>AwsomeMoon</username> <password>50b770539bdf08543f15778fc7a6f188</password> <userlevel>2</userlevel> <signupdate>2010-03-26T09:23:50</signupdate> </account> </user> <volunteer id="9"> <roles>Van Driver</roles> <region>North West</region> </volunteer> </member> <member> <user id="17"> <personal> <name>Elliot Mitchell</name> <sex>Male</sex> <address1>102 Brown Loop</address1> <address2></address2> <city>Grimsby</city> <county>Lincolnshire</county> <postcode>OX16 4QP</postcode> <telephone>01212971319</telephone> <mobile>07544663654</mobile> <email>[email protected]</email> </personal> <account> <username>msBasher</username> <password>c38fad85badcdff6e3559ef38656305d</password> <userlevel>1</userlevel> <signupdate>2010-03-26T09:23:50</signupdate> </account> </user> </member> <member> <user id="18"> <personal> <name>Scarlett Rose</name> <sex>Female</sex> <address1>93 Cedar Lane</address1> <address2></address2> <city>Stourbridge</city> <county>Warminster</county> <postcode>DY8 4NX</postcode> <telephone>01537477435</telephone> <mobile>07353867291</mobile> <email>[email protected]</email> </personal> <account> <username>MakeupWimp</username> <password>16a9b7910fc34304c1d1a6a1b0c31502</password> <userlevel>1</userlevel> <signupdate>2010-03-26T09:23:50</signupdate> </account> </user> </member> <member> <user id="19"> <personal> <name>Katie Butler</name> <sex>Female</sex> <address1>44 Boulder Crest Road</address1> <address2></address2> <city>Bungay</city> <county>Suffolk</county> <postcode>NR35 1LT</postcode> <telephone>01419124094</telephone> <mobile>07314062451</mobile> <email>[email protected]</email> </personal> <account> <username>TomatoCrunch</username> <password>d7eba53443ec4ddcee69ed71b2023fc0</password> <userlevel>1</userlevel> <signupdate>2010-03-26T09:23:50</signupdate> </account> </user> </member> <member> <user id="20"> <personal> <name>Jayden Richards</name> <sex>Male</sex> <address1>56 Corson Trail</address1> <address2></address2> <city>Sandy</city> <county>Bedfordshire</county> <postcode>SG19 6DF</postcode> <telephone>01882134438</telephone> <mobile>07540218868</mobile> <email>[email protected]</email> </personal> <account> <username>nightmareTwig</username> <password>8a9c08c7b6473493e8a5da15dd541025</password> <userlevel>3</userlevel> <signupdate>2010-03-26T09:23:50</signupdate> </account> </user> <festival id="4"> <event> <eventname>East Barnet Festival</eventname> <url>http://www.eastbarnetfestival.org.uk</url> <datefrom>2010-07-01</datefrom> <dateto>2010-07-03</dateto> <location>East Barnet</location> <eventpostcode>EN4 8TB</eventpostcode> <additional></additional> <coords> <lat>51.641556</lat> <lng>-0.163018</lng> </coords> </event> <contact> <conname>East Barnet Festival Commitee</conname> <conaddress1>Oak Hill Park</conaddress1> <conaddress2>Church Hill Road</conaddress2> <concity>East Barnet</concity> <concounty>Hertfordshire</concounty> <conpostcode>EN4 8TB</conpostcode> <contelephone>07071781745</contelephone> <conmobile>07071781745</conmobile> <fax></fax> <conemail>[email protected]</conemail> </contact> </festival> </member> <member> <user id="21"> <personal> <name>Abbie Jackson</name> <sex>Female</sex> <address1>98 Briarwood Lane</address1> <address2></address2> <city>Weymouth</city> <county>Dorset</county> <postcode>DT3 6TS</postcode> <telephone>01575629969</telephone> <mobile>07212477154</mobile> <email>[email protected]</email> </personal> <account> <username>CrazyBlockhead</username> <password>4ce56fb13d043be605037ace4fbd9fa5</password> <userlevel>2</u

    Read the article

< Previous Page | 8 9 10 11 12