Search Results

Search found 5954 results on 239 pages for 'cpu cores'.

Page 12/239 | < Previous Page | 8 9 10 11 12 13 14 15 16 17 18 19  | Next Page >

  • CPU Cooling with Heatsinks

    - by Jason Tzen
    I've constructed a server that uses 2 Xeon E5-2620 CPUs and per Intel's recommendation I'm in the process of ordering heatsinks for each and I'm slightly concerned about thermal management. The case I'm using is well ventilated (the Coolermaster Cosmos II) but I have a few concerns regarding the adequacy of the heatsinks recommended by the MB manufacturer (Supermicro CPU HeatSink SNK-P0048PS). As you can see these heatsinks come without a fan and I'm wondering if they can keep the Xeons within their normal temperature range... Due to the low volume of literature on the topic I wasn't able to find anything conclusive.

    Read the article

  • Intel mobile CPU power consumption at idle levels?

    - by Ivan Petrushev
    I was wondering if someone has observations (or specifications) of different mobile processors power consumption levels when idle? Let's define 'idle' with 'browsing web sites trough wifi, no flash, no multitasking'. There are different series processors, recognizable by their first letter. The letter tells about the maximum TDP. For example: T - 30-39W P - max 25W L - 12-19W U - <12W However this is about maximum consumptions during load. Is there any difference in power levels when the CPU is idling?

    Read the article

  • Resolving a BSOD/CPU/GPU issue...

    - by Christian Sciberras
    Hello all, I'm getting a BSOD / system crash (sometimes the PC just quits without a BSOD). Hardware Specifications cpu: i7 920 2666MHz / 8 cores (not OCed afaik) mobo: Asus P6T SE ram: 2x Corsair CM3X2G1333C9 (64bit DDR3 667MHz) gfx: ATI Radeon HD 5970 1GB (XFX HD5970 BE) os: Windows 7 Ultimate 64 bit (legit) All bios, firmware and drivers are all up to date (as of today). Symptoms Sometimes the PC runs smoothly, sometimes I get this BSOD. The BSOD always happens when I'm doing something related to graphics, such as viewing a video or playing a game. I get to know about the imminent BSOD ~10 seconds earlier; the PC starts freezing occasionally but increasing in frequency and length of lag (I noticed processor usage in creased from Process Monitor). I've tweaked BIOS settings occasionally but afaik, it was in vain. A day or so ago, I reset it to factory settings. BSOD contents The computer has rebooted from a bugcheck. The bugcheck was: 0x00000101 (0x0000000000000019, 0x0000000000000000, 0xfffff88001f35180, 0x0000000000000004). 15-12-2010 A fatal hardware error has occurred. Reported by component: Processor Core Error Source: Machine Check Exception Error Type: Internal Timer Error Processor ID: 4 23-12-2010 A fatal hardware error has occurred. Reported by component: Processor Core Error Source: Machine Check Exception Error Type: Internal Timer Error Processor ID: 2 Important The interesting thing is that although the event log (and BSOD screen) blame a "secondary processor", Windows Action Center sometimes blamed the GFX driver (for the same error). Also It is interesting to note that after hibernating my PC, I always get the BSOD.

    Read the article

  • Nginx reverse proxy apache2 High CPU load

    - by chillah
    my server: 2x Intel Xeon 5506 2.13GHz 24 GB DDR3 RAM Debian 5.0.8 64-bit My server CPU is aroung 90% at 600 users and around 6 page views per second. There are 2 Sites on the server. One Forum with low visitors and a Wordpress page. My Apache configurations: MaxKeepAliveRequests 100 KeepAliveTimeout 15 ServerLimit 500 <IfModule mpm_prefork_module> StartServers 5 MinSpareServers 5 MaxSpareServers 10 MaxClients 250 MaxRequestsPerChild 1000 </IfModule> <IfModule mpm_worker_module> StartServers 2 MaxClients 250 MinSpareThreads 25 MaxSpareThreads 150 ThreadsPerChild 25 MaxRequestsPerChild 0 </IfModule> <IfModule mpm_worker_module> StartServers 2 MaxClients 250 MinSpareThreads 25 MaxSpareThreads 150 ThreadsPerChild 25 MaxRequestsPerChild 0 </IfModule> <IfModule mpm_event_module> StartServers 2 MaxClients 150 MinSpareThreads 25 MaxSpareThreads 75 ThreadLimit 64 ThreadsPerChild 25 MaxRequestsPerChild 0 </IfModule>

    Read the article

  • Intel mobile CPU consumption at idle levels?

    - by Ivan Petrushev
    Hello, I was wondering if someone has observations (or specifications) of different mobile processors power consumption levels when idle? Let's define 'idle' with 'browsing web sites trough wifi, no flash, no multitasking'. There are different series processors, recognizable by their first letter. The letter tells about the maximum TDP. For example: T - 30-39W P - max 25W L - 12-19W U - <12W source However this is about maximum consumptions during load. Is there any difference in power levels when the CPU is idling?

    Read the article

  • CPU I/O communication part 2

    - by b-gen-jack-o-neill
    Hi, I was suggested when I have some further questions on my older ones, to create newer Question and reffer to old one. So, this is the original question: CPU I/O communication OK, I have just 2 more questions. 1, How is MMIO set? I mean, lets say I have developed some extension card with PCI interface. How do you say to memory controller to redirect desired memory space to my card´s RAM? I mean, I think standart text-mode VGA MMIO adress is 0x8000. Is this HW set (every motherboard automatically redirects 0x8000 adress to PCI-E) or its just standart and can be changed (VGA says to motherboard: give me memory mapped IO at 0x8000) 2, Can one expansion card have more MMIO connections? I mean, lets say I have card with 10 Bytes of RAM. Can Bytes 0-4 be mapped to 0x0 and bytes 5-9 to 0x5000? Please, if you know about some good article about this, please post link. Thanks.

    Read the article

  • ngen.exe is constantly using CPU

    - by teedyay
    I recently installed Windows 7. This was a clean install (i.e. not an upgrade from another version of Windows), but I did install a bunch of other programs. All mainstream applications - nothing wacky. Since then, my CPU usage has been constantly at around 50%. Task Manager shows me that ngen.exe is the culprit. It's not a long-running task: I can see that it gets a new PID at least once a second, so I guess something is constantly triggering it. It does it all the time, even when I have no applications running. Has anyone else seen this? How do I find out what's causing this?

    Read the article

  • CPU spikes on small site- possibly apache or php config related

    - by Mike
    Hello, I hope you can help me. I have a site that I'm moving to a new datacenter. The server is pretty much vanilla, no control panel, and also no optimizations. When I hit a page, the site takes an extremely long time to load, despite it being relatively light weight. I ran top to see what was happening, and the cpu jumps to 75%, and drops back down to about 20% while the rest of the page is loading. Someone suggested that I ran lsof -p on the offending processes, but I'm not sure what I'm looking at. I ran through my httpd.conf file and commented out a bunch of loaded modules that didn't seem necessary, but that didn't help either. Anyone have any ideas? Output of the lsof http://pastebin.com/mfa113f

    Read the article

  • wmpnetwork.exe service clogs CPU usage

    - by Brenton Taylor
    We have remote locations each with 2 ASUS media extenders that stream from a computer with a shared Media Player library. Lately, several of these locations experience the "wmpnetwork.exe" service throttling the CPU to 100% usage. Killing the service only results in it starting back up, and so far the only temporary solution is to uninstall Media Player. A lot of these computers are also about 3-5 years old. Could it just be a case of outdated hardware not being able to do everything we ask them to do? Edit: all running Windows XP and Windows Media Player 11

    Read the article

  • VirtualBox CPU usage 100% on host

    - by Sarveshwar
    I have installed VirtualBox 3.1.2 (latest) on my Windows 7 (x64). In the VirtualBox I've installed Windows 7 (x64). I have 4 GB RAM installed. The guest has been assigned a 1536 MB RAM. Sometimes the CPU usage on the host goes 100%. It happens everytime, in a few minutes, after starting the guest. Then it stops responding. Then I have to "power off the machine" from the menu without doing a proper shutdown. It happens with Windows XP as guest too (even when the RAM amount assigned to it was the same). What is the problem?

    Read the article

  • Is a Hyperthreaded CPU more powerful and more efficient than a Dual-core CPU? [closed]

    - by user1811864
    which computer to choose with Pentium processor hello they are getting rid of the old computer equipment in the office and i have to choose the computer to take home i get first choice to pick. -15 inch lcd screen 4 gb of ram core 2 duo dual Core E8400 3.00 GHz dvd writer windows vista/ linux -15 inch crt monitor with 2 gb ram and pentium 4 2 ghz single core HT technology windows xp hardisks both 250 GB my friend is telling me to choose the second one Pentium single core HT because he told me it runs faster becuase of HT technology and cooler and consumes less current electricity so it wont get overheated because it has HT technology so it's high definition for encoding and watching HD movies and HD sound and is like a gaming pc to play internet games. And also he said the dual core 8400 runs at 3 ghz compared to the 2 ghz so it heats very much because of the two extra cores so it takes more current raising electricty bills and is not good for gaming and watching HD movies and internet flash animations and games because of getting heated everytime. And he wants to choose and take the E8400 because he has air conditioning at home so it will be safe from heating. So which one computer should i take is it really faster because of the HT High definition technology and will i be able to play internet flash card games better and watch good HD movies Youtube etc and play all the music and songs.

    Read the article

  • CPU temperatures high on new build after gaming

    - by Reznor
    My friend had a problem with his computer a while back. His games were crashing, even within the menus. He was stumped as to what the problem was, so I posted on here requesting help. He found out the day later, when his computer would start up but wouldn't display anything on the screen. His video card must have came screwed up. So, he got a replacement. Now, there's a new problem. His temperatures, which were acceptable before, are now insanely high. His GPU temperature runs 70-80c, which is understandable considering he's running his games maxed out, but the real problem here is his processor and motherboard temperatures. All four of his cores are running at 88-90c after coming out of a game. His motherboard temperature was also 70c at one point. In terms of cooling, his case should definitely be adequate. He has an Antec Twelve Hundred. He's using stock fans. The cable management in his case is very good; better than average. He's using the stock heatsink with the processor too, but note, it was fine before the replacement, so it isn't like there's some inherent problem. He has checked the case too. Everything's fine! No cables in the way. The heatsink is seated properly. He turned his case fans up to high, as well, but the temperatures are persisting. Could the processor be overheating due to running games maxed out? Any ideas?

    Read the article

  • CPU fan turns on and off repeatedly without booting

    - by rnso
    My PC has suddenly stopped starting up. On checking with case open, the CPU fan starts running when the power is turned on, but it stops after about 2-3 seconds, restarts again after about 2-3 seconds and the loop is repeated. There is no beep and nothing appears on the screen. On searching the internet, I found there could be several reasons for this. I tried removing hard-disk, CD drive, tightening connections etc but of no avial. I also tried using a new power supply but the response is the same. Where could be the problem and how can it be solved? Thanks in advance.

    Read the article

  • 100% CPU load on Ubuntu 10.04.3 LTS 64bit

    - by deadtired
    I have 2 days since I am trying to fix this issue, with no success. The server is a mysql database server. Hardware: DELL Poweredge 1950, 2x Intel Xeon Quad Core E5345 @ 2.33GHz, 16 Gb mem, 2x 146Gb SAS (software RAID1) Software: Ubuntu 10.04.3 LTS, MySQL 5.1.41 Issue: while mysql is not used and runs with no database, everything seems alright. As soon as I install a database, it has the reason to bring all 8 cores in 100% with low memory consumption. So, you can imagine the load average goes high (I saw 212 load average for the first time). The server doesn't become unresponsive, but you can see it's slow while browsing the project installed. Additional info: the database used is not more than 24MB and it was moved from a server with less resources and a lot more larger databases. So it's not the database/project. my.cnf is not a reason also, as I used both default one and the one I use on the same distribution on another server.What is interesting is that mysql doesn't close any process and runs to the limit of the max_connections. Logs are quiet. Nothing there. I switched to this Ubuntu version after I suspected some problems in the newly Ubuntu 11.10 server. This one worked alright for an hour after I made a kernel upgrade to 3.0.1 (it was using the memory also) I tested disk speed and seems alright. Some more output on the running server: dstat -cndymlp -N total -D total 3: htop command: Idea? Did anyone meet the same problem? Any fix you can think of?

    Read the article

  • HP ML150 G6 upgrading RAM/CPU beyond specs?

    - by Morten Green Hermansen
    I am being told that some limits on some HP servers can be crossed. Do any of you have any experience with that? A ML150/G6 is limited to 48GB RAM but I have been talking to a German company that guaranties me that this server will be able to be upgraded to 384GB RAM (using 32GB memory modules and 2 CPUs) http://www.compuram.de/en/memory,HP+%28-Compaq%29,Server,Proliant,ML150+G6.htm Can this really be true? The server that I have is using E5504 CPUs but will I be able to upgrade to any CPU that is using a LGA1366 socket? All from a low wattage L5640 all the way to the 6 core, high wattage versions like an X5650? (If cooling and power is adequate ofcause). Is there any limitation with powerregulators and chipset (Intel 5500). I am looking forward to any reply. Thanks in advance and best regards, - Morten Green Hermansen, Fanitas

    Read the article

  • Flash stream makes my internet slow and cpu rush

    - by user1225840
    When I try to watch a live Flash stream, my CPU usage goes up to 75% and my Internet speed goes down. If I run a test before the video-stream, my speed is ~40/10Mbps and during the stream it drops to 0.1-0.5Mbps. The stream is laggy and I can only watch one to two seconds at a time, start/stop/start/stop. I have cleared my history, cache, cookies, temp files, and so on. I have searched for malware and took care of that. I have updated my drivers, reinstalled Flash and everything else I can think of, but it remains slow. I had this problem before and it just started working normally from one day to another. Could it be a hardware problem?

    Read the article

  • How to understand cpu family/model/stepping fields in /proc/cpuinfo

    - by Victor Sorokin
    I have following in cpuinfo: processor : 0 vendor_id : AuthenticAMD cpu family : 15 model : 107 model name : AMD Athlon(tm) 64 X2 Dual Core Processor 5600+ stepping : 2 According to Wikipedia page there are two kinds of 5600+ -- one of 90nm technology, another of 65nm. How can I understand which one I have? There seem to be no direct correspondence between contents of cpuinfo and info on Wikipedia page. AMD site seems to use some other naming scheme for processors too. How can I map values of family, model and stepping from cpuinfo to the data available on Wikipedia/AMD?

    Read the article

  • Articles of x386 and later CPU based systems

    - by user32569
    Hi there. I know this is hard question, and possibly not to be answered here, but if there is some article, or more you know about, please post a link. About books, its sad but many great computer books cannot be bought in my country. So, you can find many articles online, which says how memory was mapped back in pre x386 CPU. How there was explicit holes ready for MMIO BIOS, Video BIOS, etc. How there was A20 line for allowing higher memory access etc. Problem is, time changed. Today BIOSes are many times larger, and pure x86 16bit mode is used for booting and ROM flashing only. OS ignore BIOS as they access everything using drivers. And I just want to know, how it works today. I know not so specific question, but I read OS dev wiki, many articles, but all refering to days before massive usage of pure 32bit CPUs.

    Read the article

  • Reducing CPU load to absolute minimum [on hold]

    - by user191338
    I have had a couple of things gone missing I believe stolen in my shared apartment and want to run my laptop constantly with a webcam attached, running webcam surveillance software to record/ take pictures when motion is sensed. Id like to take whatever steps are necessary to be able to run the laptop constantly without the fan coming on, as its quite loud and even though it will be hidden it can be heard. Thus Id like to know what steps I can take to reduce CPU to the bare minimum for the laptop to boot up and run the camera software and send images via ftp / email when necessary. I have windows 7 installed, though I can reinstall it clean. Which are the windows services can I turn off, and more extreme disabling or measures of whatever kind which I can take. The OS would need to run the camera, wifi / networking. Thanks very much for any help.

    Read the article

  • Caching DNS server (bind9.2) CPU usage is so so so high

    - by Gk.
    I have a caching-only dns server which get ~3k queries per second. Here is specs: Xeon dual-core 2,8GHz 4GB of RAM Centos 5x (kernel 2.6.18-164.15.1.el5PAE) bind 9.4.2 rndc status: recursive clients: 666/4900/5000 About 300 new queries (not in cache) per second. Bind always uses 100% on one core on single-thread config. After I recompiled it to multi-thread, it uses nearly 200% on two core :( No iowait, only sys and user. I searched around but didn't see any info about how bind use CPU. Why does it become bottleneck? One more thing, here is RAM usage: cat /proc/meminfo MemTotal: 4147876 kB MemFree: 1863972 kB Buffers: 143632 kB Cached: 372792 kB SwapCached: 0 kB Active: 1916804 kB Inactive: 276056 kB I've set max-cache-size to 0 to make sure bind can use as much RAM as it want, but it always stop at ~2GB. Since every second we got not cached queries so theoretically RAM must be exhausted but it wasn't. Do you have any idea? TIA, -Gk

    Read the article

  • PC dies when running at 100% CPU

    - by user155631
    I recently wrote some Java code to generate images of the Mandelbrot set (fractal). I made use of the new Fork/Join facility in Java 7 to run separate threads on all four cores (2 real, 2 virtual)simultaneously, using a large number of iterations for greater accuracy. The problem is, the process runs fine for about a minute, and then it's as if someone has pulled the plug and the PC just dies. I thought it must be the CPUs overheating, so I ran Real Temp to monitor the temperature. It's an Intel i3 processor. I can see the temperature creeping up to 70 degrees, and then it seems to level off there and run for about another 30 seconds before dying. According to Real Temp, there's still a gap of 35 degrees between the actual temperature and TJ max. I also tried disabling "CPU TM function" in the BIOS, but the problem still occurs. A colleague suggested that it might be a power supply problem, so I borrowed a more powerful PSU (can't remember what wattage it was, but it's higher than mine which is 500W). The exact same thing still happens though. Is anyone able to suggest what the problem might be, or what I can try next?

    Read the article

  • Why does Ubuntu 12.10 only see 8 cores?

    - by tunnuz
    In our lab we just bought a new machine with two 8-cores Intel(R) Xeon(R) CPU E5-2660 0 @ 2.20GHz processors which also support Hyper-Threading. I would expect Ubuntu to see 32 processing units, however it only detects 8 of them (the equivalent of just one processor with Hyper-Threading disabled). The bios correctly reports a total of 32 processing units. I am using Ubuntu 12.10 desktop 32 bit. Any idea about how to solve this?

    Read the article

  • Mac OS X Server 10.6.6 "disables" CPU in VMware Fusion

    - by wjlafrance
    I installed Mac OS X Server 10.6.0 in VMWare Fusion the other night and it worked perfectly, until I ran Software Update. I upgraded to 10.6.6 through the combo updater, and now when I start the VM it says: "The CPU has been disabled by the guest operating system. You will need to power off or reset the virtual machine at this point." I've switched the operating system in the options to OS X Server 32bit, 64bit, and even to Windows 7, and nothing has worked. Does anyone have any ideas?

    Read the article

  • How much CPU use is too much?

    - by Jonathan Sampson
    I've got a server that receives around a million unique visitors a month and I've recently began using Plesk to help monitor some of the vitals on the box itself. RAM I can make sense of, but I'm not really sure if my CPU usage is too high, low, or about average for this number of visitors. The server exists solely to serve up a somewhat hefty WordPress blog. This is one week. What types of things should I look out for? Some other information about this server follows: VCPU(s): 4, RAM: 6GB, HDD: 30GB, OS: Ubuntu Server 10.04 x86_64

    Read the article

  • What are those CPU control panel softwares called?

    - by Tim
    My computer is running an AMD Phenom II quad core CPU but it didn't come with the piece of software that I see people have in a lot of youtube videos. The software is kind of like the ATI catalyst control center but for the AMD processor instead. It shows things like current core temperature, clock speed, etc and I am not sure but maybe it also allows the user to make changes to those things from the control center as well. I am having a hard time finding the download for this online, especially since I don't even have the name for it.

    Read the article

< Previous Page | 8 9 10 11 12 13 14 15 16 17 18 19  | Next Page >