Search Results

Search found 1209 results on 49 pages for 'cx freeze'.

Page 12/49 | < Previous Page | 8 9 10 11 12 13 14 15 16 17 18 19  | Next Page >

  • Computer always freezing after random periods of time. No errors listed.

    - by Wesley
    Hi, all. Here are my specs beforehand: AMD Athlon XP 2400+ @ 2.00 GHz, 160GB IDE HDD, 128MB GeForce 6200 AGP, 2 x 512MB PC3200 DDR RAM, CoolMax 350W PSU, 1 x CD-RW Drive, 1 x DVD-ROM Drive, FIC AM37 Mobo, Windows XP Pro SP3 My desktop freezes after random periods of time but there are no errors listed in the Event Viewer after a forced shutdown and restart. A couple months ago, I found that when it froze, the floppy was being accessed at the same time. So, I disconnected the floppy (since I never used it anyways) from the power supply and motherboard. Everything was working fine and the computer never froze. This past Christmas break, I left for a Conference and when I got home, the computer kept freezing again. So, this time, I just disconnected the DVD reader (from mobo and power) and started it up. Still, it froze almost right away. Then I found some older sticks of RAM (2 x 256MB PC2100 DDR) and swapped them in. Everything worked fine again after that. I even swapped the 2 x 512MB PC3200 DDR RAM back in and everything worked okay. Then it started freezing again, and I tried all possible RAM combos, still freezing within 5-10 minutes of startup. One thing I've realized is that the floppy drive is still listed in My Computer and I uninstalled it from my Device Manager already. There were no software errors, and I uninstalled the most recent software, with no effect. Still, I have no idea what is wrong because everything ran fine before that. Any suggestions? EDIT: Still have yet to buy some blank CD media to use Memtest86+. However, would a lack of virtual memory cause the computer to freeze? EDIT2: So after a long time, I ran Memtest86+ and all is well. Turns out though, after removing my original DVD reader and replacing it with a DVD-ROM drive, there is no freezing whatsoever! Thanks for all your suggestions!

    Read the article

  • Linux Mint Constantly freezing on Dell XPS L502X

    - by Josh
    I recently partitioned my hard drive to dual boot the existing Windows 7 with Linux Mint because I am tired of using Windows, especially the lack of terminal. I want to eventually remove Windows 7 and just run it from a VM within Linux Mint, but I want to make sure that I like the Mint before going all in. I ran Linux Mint on a VM inside Windows for a while, enjoyed it, and never had any issues with it. Since installing on my hard drive it has started freezing every 5-10 minutes, and the only way to get it back is to either power down, or close the lid and reopen once it sleeps. I've also tried running Ubuntu on dual boot in the past, and while it never froze, the battery life was terrible, and the fan was constantly running. I'm experiencing the same battery/fan problem with Mint, which doesn't make sense to me, as Linux should be lighter on the CPU than windows. If I had to guess I'd say it's probably a driver thing, with my video card or fan or something. My battery life in Windows is ~2 hours and its about 40 minutes in Linux. At this point, that is even if my laptop doesn't freeze before then. On a less important note, I also have an intel Centrino 6150 WiMax card that I'd like to be able to use, but that won't register on the Linux system either. I have tried downloading drivers for both of these, but neither have solved my problems. I'm definitely getting frustrated and am getting close to giving up on Linux even though I dread working on a Windows machine.

    Read the article

  • toshiba a200 laptop hangs/freezes when plugged in

    - by tapan
    The subject says it all. It is the exact same problem as described here. I had asked a similar question before here. My system specs etc, everything is here. My problem is just that I cannot afford to get it fixed right now. I just need for the laptop to be kind of usable for 2-3 more months. It worked perfectly for 3 months or so in ubuntu recovery mode. Now it hangs/freezes every hour. I spend 8 hours a day on an average on my laptop. So i just want it to last at least that long. If the laptop is not plugged in in recovery mode / regular ubuntu mode, it freezes in 5 mins and the screen becomes all weird. With my windows 7 OS, it works perfectly on battery but hangs instantly as soon as it is plugged in. Also now, a high cpu usage doesn't help anymore. Any strategy or suggestions i could employ to extend the duration for which it doesn't freeze ?

    Read the article

  • Diagnose remote desktop freezes in Windows 7 when no BSOD?

    - by Paul Smith
    Okay, I'm getting no joy from Asus or Microsoft on this, so hoping for some clues on how to narrow down the cause. I have very frequent OS freezes, always & only when running Remote Destkop Client (mstsc) in Windows 7 x64. I never have a bluescreen, and there is never a minidump. The display & input just freezes -- no keyboard, no mouse, and sound will just continue the last wavelength if any. So far, I can't find a way to trap the hang given that there's no bluescreen; advanced startup & recovery settings for system failure are "Write an event" checked, "Automatically restart" checked, and "Kernel memory dump". I've updated to the lasted BIOS, and tried a few different graphics drivers, both generic & ATI. I've also tried disabling Aero, and everything about the remote desktop experience (incrementally unchecked every box in the mstsc - options - experience tab), even disabled/unplugged external monitor to make sure it wasn't a dual-monitor issue. My specs are: Asus G73jh notebook 8GB RAM ATI Mobility Radeon HD 5800 Series graphics (recently tried driver versions 8.791.0.0, 8.801.0.0) American Megatrends G73jh.211 BIOS (7/27/2010) Windows 7 Home Premium x64 Windows Memory Diagnostic passed all of the following at least 3 times with no errors: MATS+ INVC LRAND Stride6 WMATS+ WINVC This notebook is better than most at removing heat (laudable vent design), so I'm not inclined to suspect thermal causes (especially since running 1080p video for hours has never caused a freeze, but mstsc does, reliably, within 5 minutes to an hour). This did seem to start happening after a Windows Update, but I've since reverted every patch applied since a week before the first occurrence, with no joy. (And I'd only had the PC for a couple weeks before that, so it could have been chance + less actual time spent remoting at the beginning.) I'm at my wits end, and I bought this laptop primarily as a remote terminal client (go figure, right?) Any ideas on how to identify the cause of this? Thanks!

    Read the article

  • Explorer.exe hangup during move large file into external drive

    - by PiotrK
    During move large files (700mb+) to external drive formated NTFS via USB 3.0 I've noticed strange things about explorer.exe (I am using Windows 7 up to date) Sometimes after move file the explorer get stuck (ie. it can happen after few files during move of several large files) - moving window freeze and I am unable to kill explorer (via taskmgr, or cmdline TASKKILL). In command line I've got something like this (taskmgr shows that explorer.exe is still running - I've got the same PID every time I try to kill it and no diagnostic message): C:\Windows\system32TASKKILL /F /IM explorer.exe SUKCES: proces "explorer.exe" o identyfikatorze PID 6296 zostal zakonczony. C:\Windows\system32TASKKILL /F /IM explorer.exe SUKCES: proces "explorer.exe" o identyfikatorze PID 6296 zostal zakonczony. If I try to run another explorer.exe process at this point, I got desktop icon and start bar back but I cannot open any explorer window After few minutes explorer.exe finally dies and I am able to rerun it without rebooting File that I moved have two copies - one local and one on the external drive (the original file wasn't delete after move); Both copies seems to contain the same data (same length and CRC info) If this happen during move of multiply files, only some files are moved and one of them have two copies (both locally and on the external drive) What can I do to fix those explorer hangs? Added: The same problem exist when copying files, it hangsup between large files Similar problem exist when I tried to use TotalCommander (x64): copying paused at 80% of one of files, TC didn't hung up (but clicking cancel in copying dialog box doesn't have any effect). During this pause I can't kill TotalCmd.exe just like Explorer.exe Added (2): This problem seems to disappear when I use 32 bit applications (like TotalCommander (x86) ), but I need to do more testing to be sure of this Added (3): There are several errors in event log, source: disk, id: 11, qualifiers: 49156, task: 0, level: 2, keywords: 0x80000000000000 (This may be important, and I forgot to mention this): Main disk is encrypted via Truecrypt (boot-in password)

    Read the article

  • computer freezes but music continues

    - by Danny
    Recently I have had a problem where my computer will freeze completely but if I happen to be streaming Pandora in a tab that will continue playing. If I wait about 2-5 minutes it will eventually come back and start working normally. I also noticed that during the period that it is unresponsive that the HDD activity light stays lit the whole time, not flashing. I've ran memtest86+ and a diagnostic from Western Digital for my HDD model and none of them reported any errors. The specs for my computer are 1 x ASRock H55M/USB3 R2.0 LGA 1156 Intel H55 HDMI USB 3.0 Micro ATX Intel Motherboard 1 x CORSAIR Enthusiast Series CMPSU-550VX 550W ATX12V V2.2 SLI Ready CrossFire Ready 80 PLUS Certified Active PFC Compatible with Core i7 Power Supply 1 x Intel Core i3-540 Clarkdale 3.06GHz LGA 1156 73W Dual-Core Desktop Processor Intel HD Graphics BX80616I3540 1 x G.SKILL 4GB (2 x 2GB) 240-Pin DDR3 SDRAM DDR3 1600 (PC3 12800) Dual Channel Kit Desktop Memory Model F3-12800CL9D-4GBNQ 1 x ASUS PCE-N13 PCI Express 150/300Mbps Transfer/Receive Rate Wireless Adapter 1 x EVGA 01G-P3-1556-KR GeForce GTX 550 Ti (Fermi) FPB 1GB 192-bit GDDR5 PCI Express 2.0 x16 HDCP Ready SLI Support Video Card I can't imagine what would be causing these problems.

    Read the article

  • Windows 7 PC freezes frequently with hard disk light constantly on

    - by Senthil
    I recently replaced a defective hard disk with a new one - Windows 7 - "A disk read error occured. Press Ctrl + Alt + Del to restart" I have been using the new hard disk with a Windows 7 installation for about 4 days. Now it has started freezing frequently. Sometimes every 2 minutes and sometimes every 10 seconds. There is lots of software installed - I am a developer and my PC is full of IDEs, database servers, web servers, developer tools, testing tools, all browsers etc.. My windows is up to date as of now. I have installed ALL updates including optional drivers etc. All my installed software is up to date. I scanned my computer using Microsoft Security Essentials and found nothing malicious. I did a chkdsk /r and found no problems. I did a memory diagnostic and found no problems. When I go into safe mode, it doesn't freeze and I am able to use it normally for longer periods of time. What other steps can I take to locate the problem?

    Read the article

  • My Samsung R480 laptop freezes for short and inconsistent periods of time.

    - by anonymous
    I have a Samsung R480 laptop running Windows 7. It's great, I love it to death, but every so often it'll start having, for lack of a better term, "hiccups". It would freeze completely, emit a loud BZZZZZZT from the speakers (think when a video freezes and the sound gets stuck), then return to working order all in a span of 0.5~2 seconds. It has happened while I was playing Mass Effect, while I was watching both HD and non-HD videos, and while I was surfing the internet (which I've noticed while watching YouTube videos and playing Entanglement, but also noticed while using Facebook, minus the buzzing sound). My Initial hypothesis was that my GPU or CPU were overheating as it would shut down while playing Mass Effect, but when I turned off my WiFi card hardware using [fn + F9], the problem was resolved. As I currently see it, it could be a problem with my CPU, my WiFi card, or my sound card. It could also be a software related issue, possibly an ill-functioning process. It could be chrome related. A memory leak from chrome maybe? Does anyone know how to resolve this?

    Read the article

  • OpenGL Calls Lock/Freeze

    - by Necrolis
    I am using some dell workstations(running WinXP Pro SP 2 & DeepFreeze) for development, but something was recenlty loaded onto these machines that prevents any opengl call(the call locks) from completing(and I know the code works as I have tested it on 'clean' machines, I also tested with simple opengl apps generated by dev-cpp, which will also lock on the dell machines). I have tried to debug my own apps to see where exactly the gl calls freeze, but there is some global system hook on ZwQueryInformationProcess that messes up calls to ZwQueryInformationThread(used by ExitThread), preventing me from debugging at all(it causes the debugger, OllyDBG, to go into an access violation reporting loop or the program to crash if the exception is passed along). the hook: ntdll.ZwQueryInformationProcess 7C90D7E0 B8 9A000000 MOV EAX,9A 7C90D7E5 BA 0003FE7F MOV EDX,7FFE0300 7C90D7EA FF12 CALL DWORD PTR DS:[EDX] 7C90D7EC - E9 0F28448D JMP 09D50000 7C90D7F1 9B WAIT 7C90D7F2 0000 ADD BYTE PTR DS:[EAX],AL 7C90D7F4 00BA 0003FE7F ADD BYTE PTR DS:[EDX+7FFE0300],BH 7C90D7FA FF12 CALL DWORD PTR DS:[EDX] 7C90D7FC C2 1400 RETN 14 7C90D7FF 90 NOP ntdll.ZwQueryInformationToken 7C90D800 B8 9C000000 MOV EAX,9C the messed up function + call: ntdll.ZwQueryInformationThread 7C90D7F0 8D9B 000000BA LEA EBX,DWORD PTR DS:[EBX+BA000000] 7C90D7F6 0003 ADD BYTE PTR DS:[EBX],AL 7C90D7F8 FE ??? ; Unknown command 7C90D7F9 7F FF JG SHORT ntdll.7C90D7FA 7C90D7FB 12C2 ADC AL,DL 7C90D7FD 14 00 ADC AL,0 7C90D7FF 90 NOP ntdll.ZwQueryInformationToken 7C90D800 B8 9C000000 MOV EAX,9C So firstly, anyone know what if anything would lead to OpenGL calls cause an infinite lock,and if there are any ways around it? and what would be creating such a hook in kernal memory ? Update: After some more fiddling, I have discovered a few more kernal hooks, a lot of them are used to nullify data returned by system information calls(such as the remote debugging port), I also managed to find out the what ever is doing this is using madchook.dll(by madshi) to do this, this dll is also injected into every running process(these seem to be some anti debugging code). Also, on the OpenGL side, it seems Direct X is fine/unaffected(I ran one of the DX 9 demo's without problems), so could one of these kernal hooks somehow affect OpenGL?

    Read the article

  • Debugging in visual studio 2008 freezes entire system

    - by mat690
    Any time i try to debug in visual studio 2008 my entire system will freeze whenever a breakpoint is hit. I can move the mouse around and that remains responsive but nothing i click on does anything, I can bring up the task manager but can't do anything with it and i am able to lock/unlock the machine. I tried a fix that i found via google that suggested i disable advanced text services but it didn't work. I am using visual studio 2008 with SP1 running on Windows XP Pro, asking here is my last hope before formating/reinstalling so i hope someone can help me out. I debug by running the application in debug mode, the freeze happens no matter what the project size and it seems as if it is just the entire GUI that freezes, the computer carries on working just fine i just can't do anything with it because the GUI is totaly unresponsive.

    Read the article

  • What is the probable failure - no BSOD, no event log, monitors sleeping, force reboot required

    - by Tyler
    Every 3 to 15 days, my PC freezes. This typically happens when the computer is idle, I'm coming home from work, back from vacation, etc. It's never happened while using my computer. The monitors are in power save mode The Caps Lock light on the (wireless) keyboard doesn't work Ctrl-alt-del has no effect, mouse (wireless) has no effect The hardware reset button and single press of power putton have no effect Computer does not appear on the network No BSOD, no memory dump Event logs have no errors or indications of problems near the time of crash. Only messages after reboot indicating that there was a reboot without a clean shutdown. Windows is set to never put the computer to sleep (just the display) Here are the vital stats of the build: OS Windows 8 Pro 64-bit CPU Intel i5-2400 Mobo Intel BOXDP67DE Micro ATX GPU MSI N460GTX Cyclone768D5/OC RAM CORSAIR XMS3 8GB (2 x 4GB) CMX8GX3M2A1333C9 PSU SeaSonic X Series X650 Gold System Drive Samsung 840 Pro 256 GB SSD Data Drive 2 x Western Digital WD20EARS 2TB in hardware RAID 1 Optical Lite-On DVD burner IHAS424-98 And here is the story of how the problem developed and what I've done to diagnose: January 2011, system built with Windows 7 64-bit, runs great. March 2011, Intel replaced the mobo because of the bad sata controllers. October 2012, upgrade to Windows 8 (problems start shortly after). January 2013, system freezes and causes network to fail for the whole house. Unplug the network cable and other devices and PCs can use the internet. Plug it back in, internet goes away for everyone. Reboot and everything is fine. March 2013, install Intel Gigabit CT PCI-E NIC, disable mobo nic in bios. Network strangeness goes away. Freezes are less frequent. Memtest shows no problems (20 passes). Early June 2013, replace Antec PSU with SeaSonic PSU. Mid June 2013, replace OCZ Vertex 2 SSD with Samsung SSD. Late June 2013, get frustrated and hope the community has some good ideas (I'm running out of budget to replace parts). My next plan of attack is setting "Turn off display" to Never and using a screen saver to see how that reacts on the next freeze. It makes me sad to waste power for up to 15 days though. Has anyone out there seen a problem like this? Any ideas on what kind of malfunction would act this way? Ideas of other diagnostic steps to take?

    Read the article

  • How does Brocade (Foundry) FastIron CX compare to Cisco 3750 stackable switches?

    - by Paul
    We're considering Brocade's CX series vs. Cisco's 3750 at both core and distribution layers for a new site with gig to desktop, without POE. If you have any hands-on experience with FastIron CX switches, I would greatly value your impressions. I'll gladly add mine to the discussion when we get some quality time with our eval units (one just arrived yesterday, another's on the way). Thank you!

    Read the article

  • PC hangs and reboots from time to time

    - by Bevor
    Hello, I have a very strange problem: Since I have my new PC, I have always had problems with it. From time to time the computer freezes for some seconds and suddendly reboots by itself. I've had this problem since Ubuntu 9.10. The same with 10.04 and 10.10. That's why I don't think it's a software failure because the problem persist too long. It doesn't have anything to do with what I'm doing at this time. Sometimes I listen to music, sometimes I only use Firefox, sometimes I'm running 2 or 3 VMs, sometimes I watch DVD. So it's not isolatable. I could freeze once a day or once a week. I put the PC to the vendor twice(!). The first time they changed my power supply but the problem persisted. The second time they told me that they made some heavy performance tests 50 hours long but they didn't find anything. (How can that be that I have daily freezes with normal usage). The vendor didn't check the hard discs because they used their own disc with Windows. (So they never checked the Linux installation). Yesterday I made some intensive hard disc scans with "SMART" but no errors were found. I ran memtest for 3 times but no errors found. I already had this problem in my old flat, so I doubt that I has something to do with current fluctuation. I already tried another electrical socket and changed to connector strip but the problem persists. At the moment I removed 2 of the RAMs (2x 2GB). In all I have 6GB, 2x2GB and 2x1GB. Could this difference maybe be a problem? Here is a list of my components. I hope that anybody find something I didn't think about yet. And here a list of my components: 1x AMD Phenom II X4 965 Black Edition, 3,4Ghz, Quad Core, S-AM3, Boxed 2x DDR3-RAM 2048MB, PC3-1333 Mhz, CL9, Kingston ValueRAM 2x DDR3-RAM 1024MB, PC3-1333 Mhz, CL9, Kingston ValueRAM 2x SATA II Seagate Barracuda 7200.12, 1TB 32MB Cache = RAID 1 1x DVD ROM SATA LG DH16NSR, 16x/52x 1x DVD-+R/-+RW SATA LG GH-22NS50 1x Cardreader 18in1 1x PCI-E 2.0 GeForce GTS 250, Retail, 1024MB 1x Power Supply ATX 400 Watt, CHIEFTEC APS-400S, 80 Plus 1x Network card PCI Intel PRO/1000GT 10/100/1000 MBit 1x Mainboard Socket-AM3 ASUS M4A79XTD EVO, ATX lshw: description: Desktop Computer product: System Product Name vendor: System manufacturer version: System Version serial: System Serial Number width: 64 bits capabilities: smbios-2.5 dmi-2.5 vsyscall64 vsyscall32 configuration: boot=normal chassis=desktop uuid=80E4001E-8C00-002C-AA59-E0CB4EBAC29A *-core description: Motherboard product: M4A79XTD EVO vendor: ASUSTeK Computer INC. physical id: 0 version: Rev X.0X serial: MT709CK11101196 slot: To Be Filled By O.E.M. *-firmware description: BIOS vendor: American Megatrends Inc. physical id: 0 version: 0704 (11/25/2009) size: 64KiB capacity: 960KiB capabilities: isa pci pnp apm upgrade shadowing escd cdboot bootselect socketedrom edd int13floppy1200 int13floppy720 int13floppy2880 int5printscreen int9keyboard int14serial int17printer int10video acpi usb ls120boot zipboot biosbootspecification *-cpu description: CPU product: AMD Phenom(tm) II X4 965 Processor vendor: Advanced Micro Devices [AMD] physical id: 4 bus info: cpu@0 version: AMD Phenom(tm) II X4 965 Processor serial: To Be Filled By O.E.M. slot: AM3 size: 800MHz capacity: 3400MHz width: 64 bits clock: 200MHz capabilities: fpu fpu_exception wp vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush mmx fxsr sse sse2 ht syscall nx mmxext fxsr_opt pdpe1gb rdtscp x86-64 3dnowext 3dnow constant_tsc rep_good nonstop_tsc extd_apicid pni monitor cx16 popcnt lahf_lm cmp_legacy svm extapic cr8_legacy abm sse4a misalignsse 3dnowprefetch osvw ibs skinit wdt npt lbrv svm_lock nrip_save cpufreq *-cache:0 description: L1 cache physical id: 5 slot: L1-Cache size: 512KiB capacity: 512KiB capabilities: pipeline-burst internal varies data *-cache:1 description: L2 cache physical id: 6 slot: L2-Cache size: 2MiB capacity: 2MiB capabilities: pipeline-burst internal varies unified *-cache:2 description: L3 cache physical id: 7 slot: L3-Cache size: 6MiB capacity: 6MiB capabilities: pipeline-burst internal varies unified *-memory description: System Memory physical id: 36 slot: System board or motherboard size: 2GiB *-bank:0 description: DIMM Synchronous 1333 MHz (0.8 ns) product: ModulePartNumber00 vendor: Manufacturer00 physical id: 0 serial: SerNum00 slot: DIMM0 size: 1GiB width: 64 bits clock: 1333MHz (0.8ns) *-bank:1 description: DIMM Synchronous 1333 MHz (0.8 ns) product: ModulePartNumber01 vendor: Manufacturer01 physical id: 1 serial: SerNum01 slot: DIMM1 size: 1GiB width: 64 bits clock: 1333MHz (0.8ns) *-bank:2 description: DIMM [empty] product: ModulePartNumber02 vendor: Manufacturer02 physical id: 2 serial: SerNum02 slot: DIMM2 *-bank:3 description: DIMM [empty] product: ModulePartNumber03 vendor: Manufacturer03 physical id: 3 serial: SerNum03 slot: DIMM3 *-pci:0 description: Host bridge product: RD780 Northbridge only dual slot PCI-e_GFX and HT1 K8 part vendor: ATI Technologies Inc physical id: 100 bus info: pci@0000:00:00.0 version: 00 width: 32 bits clock: 66MHz *-pci:0 description: PCI bridge product: RD790 PCI to PCI bridge (external gfx0 port A) vendor: ATI Technologies Inc physical id: 2 bus info: pci@0000:00:02.0 version: 00 width: 32 bits clock: 33MHz capabilities: pci pm pciexpress msi ht normal_decode bus_master cap_list configuration: driver=pcieport resources: irq:40 ioport:a000(size=4096) memory:f8000000-fbbfffff ioport:d0000000(size=268435456) *-display description: VGA compatible controller product: G92 [GeForce GTS 250] vendor: nVidia Corporation physical id: 0 bus info: pci@0000:01:00.0 version: a2 width: 64 bits clock: 33MHz capabilities: pm msi pciexpress vga_controller bus_master cap_list rom configuration: driver=nvidia latency=0 resources: irq:18 memory:fa000000-faffffff memory:d0000000-dfffffff memory:f8000000-f9ffffff ioport:ac00(size=128) memory:fbbe0000-fbbfffff *-pci:1 description: PCI bridge product: RD790 PCI to PCI bridge (PCI express gpp port C) vendor: ATI Technologies Inc physical id: 6 bus info: pci@0000:00:06.0 version: 00 width: 32 bits clock: 33MHz capabilities: pci pm pciexpress msi ht normal_decode bus_master cap_list configuration: driver=pcieport resources: irq:41 ioport:b000(size=4096) memory:fbc00000-fbcfffff ioport:f6f00000(size=1048576) *-network description: Ethernet interface product: RTL8111/8168B PCI Express Gigabit Ethernet controller vendor: Realtek Semiconductor Co., Ltd. physical id: 0 bus info: pci@0000:02:00.0 logical name: eth0 version: 03 serial: e0:cb:4e:ba:c2:9a size: 10MB/s capacity: 1GB/s width: 64 bits clock: 33MHz capabilities: pm msi pciexpress msix vpd bus_master cap_list rom ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd 1000bt 1000bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=r8169 driverversion=2.3LK-NAPI duplex=half latency=0 link=no multicast=yes port=MII speed=10MB/s resources: irq:45 ioport:b800(size=256) memory:f6fff000-f6ffffff memory:f6ff8000-f6ffbfff memory:fbcf0000-fbcfffff *-pci:2 description: PCI bridge product: RD790 PCI to PCI bridge (PCI express gpp port D) vendor: ATI Technologies Inc physical id: 7 bus info: pci@0000:00:07.0 version: 00 width: 32 bits clock: 33MHz capabilities: pci pm pciexpress msi ht normal_decode bus_master cap_list configuration: driver=pcieport resources: irq:42 ioport:c000(size=4096) memory:fbd00000-fbdfffff *-firewire description: FireWire (IEEE 1394) product: VT6315 Series Firewire Controller vendor: VIA Technologies, Inc. physical id: 0 bus info: pci@0000:03:00.0 version: 00 width: 64 bits clock: 33MHz capabilities: pm msi pciexpress ohci bus_master cap_list configuration: driver=firewire_ohci latency=0 resources: irq:19 memory:fbdff800-fbdfffff ioport:c800(size=256) *-pci:3 description: PCI bridge product: RD790 PCI to PCI bridge (PCI express gpp port E) vendor: ATI Technologies Inc physical id: 9 bus info: pci@0000:00:09.0 version: 00 width: 32 bits clock: 33MHz capabilities: pci pm pciexpress msi ht normal_decode bus_master cap_list configuration: driver=pcieport resources: irq:43 ioport:d000(size=4096) memory:fbe00000-fbefffff *-ide description: IDE interface product: 88SE6121 SATA II Controller vendor: Marvell Technology Group Ltd. physical id: 0 bus info: pci@0000:04:00.0 version: b2 width: 32 bits clock: 33MHz capabilities: ide pm msi pciexpress bus_master cap_list configuration: driver=pata_marvell latency=0 resources: irq:17 ioport:dc00(size=8) ioport:d880(size=4) ioport:d800(size=8) ioport:d480(size=4) ioport:d400(size=16) memory:fbeffc00-fbefffff *-storage description: SATA controller product: SB700/SB800 SATA Controller [IDE mode] vendor: ATI Technologies Inc physical id: 11 bus info: pci@0000:00:11.0 logical name: scsi0 logical name: scsi2 version: 00 width: 32 bits clock: 66MHz capabilities: storage msi ahci_1.0 bus_master cap_list emulated configuration: driver=ahci latency=64 resources: irq:44 ioport:9000(size=8) ioport:8000(size=4) ioport:7000(size=8) ioport:6000(size=4) ioport:5000(size=16) memory:f7fffc00-f7ffffff *-disk:0 description: ATA Disk product: ST31000528AS vendor: Seagate physical id: 0 bus info: scsi@0:0.0.0 logical name: /dev/sda version: CC38 serial: 9VP3WD9Z size: 931GiB (1TB) capabilities: partitioned partitioned:dos configuration: ansiversion=5 signature=000ad206 *-volume:0 UNCLAIMED description: Linux filesystem partition vendor: Linux physical id: 1 bus info: scsi@0:0.0.0,1 version: 1.0 serial: 81839235-21ea-4853-90a4-814779f49000 size: 972MiB capacity: 972MiB capabilities: primary ext2 initialized configuration: filesystem=ext2 modified=2010-12-06 18:32:58 mounted=2010-11-01 07:05:10 state=unknown *-volume:1 UNCLAIMED description: Linux swap volume physical id: 2 bus info: scsi@0:0.0.0,2 version: 1 serial: 22b881d5-6f5c-484d-94e8-e231896fa91b size: 486MiB capacity: 486MiB capabilities: primary nofs swap initialized configuration: filesystem=swap pagesize=4096 *-volume:2 UNCLAIMED description: EXT3 volume vendor: Linux physical id: 3 bus info: scsi@0:0.0.0,3 version: 1.0 serial: ad5b0daf-11e8-4f8f-8598-4e89da9c0d84 size: 47GiB capacity: 47GiB capabilities: primary journaled extended_attributes large_files recover ext3 ext2 initialized configuration: created=2010-02-16 20:42:29 filesystem=ext3 modified=2010-11-29 17:02:34 mounted=2010-12-06 18:32:50 state=clean *-volume:3 UNCLAIMED description: Extended partition physical id: 4 bus info: scsi@0:0.0.0,4 size: 882GiB capacity: 882GiB capabilities: primary extended partitioned partitioned:extended *-logicalvolume UNCLAIMED description: Linux filesystem partition physical id: 5 capacity: 882GiB *-disk:1 description: ATA Disk product: ST31000528AS vendor: Seagate physical id: 1 bus info: scsi@2:0.0.0 logical name: /dev/sdb version: CC38 serial: 9VP3SCPF size: 931GiB (1TB) capabilities: partitioned partitioned:dos configuration: ansiversion=5 signature=000ad206 *-volume:0 UNCLAIMED description: Linux filesystem partition vendor: Linux physical id: 1 bus info: scsi@2:0.0.0,1 version: 1.0 serial: 81839235-21ea-4853-90a4-814779f49000 size: 972MiB capacity: 972MiB capabilities: primary ext2 initialized configuration: filesystem=ext2 modified=2010-12-06 18:32:58 mounted=2010-11-01 07:05:10 state=unknown *-volume:1 UNCLAIMED description: Linux swap volume physical id: 2 bus info: scsi@2:0.0.0,2 version: 1 serial: 22b881d5-6f5c-484d-94e8-e231896fa91b size: 486MiB capacity: 486MiB capabilities: primary nofs swap initialized configuration: filesystem=swap pagesize=4096 *-volume:2 UNCLAIMED description: EXT3 volume vendor: Linux physical id: 3 bus info: scsi@2:0.0.0,3 version: 1.0 serial: ad5b0daf-11e8-4f8f-8598-4e89da9c0d84 size: 47GiB capacity: 47GiB capabilities: primary journaled extended_attributes large_files recover ext3 ext2 initialized configuration: created=2010-02-16 20:42:29 filesystem=ext3 modified=2010-11-29 17:02:34 mounted=2010-12-06 18:32:50 state=clean *-volume:3 UNCLAIMED description: Extended partition physical id: 4 bus info: scsi@2:0.0.0,4 size: 882GiB capacity: 882GiB capabilities: primary extended partitioned partitioned:extended *-logicalvolume UNCLAIMED description: Linux filesystem partition physical id: 5 capacity: 882GiB *-usb:0 description: USB Controller product: SB700/SB800 USB OHCI0 Controller vendor: ATI Technologies Inc physical id: 12 bus info: pci@0000:00:12.0 version: 00 width: 32 bits clock: 66MHz capabilities: ohci bus_master configuration: driver=ohci_hcd latency=64 resources: irq:16 memory:f7ffd000-f7ffdfff *-usb:1 description: USB Controller product: SB700 USB OHCI1 Controller vendor: ATI Technologies Inc physical id: 12.1 bus info: pci@0000:00:12.1 version: 00 width: 32 bits clock: 66MHz capabilities: ohci bus_master configuration: driver=ohci_hcd latency=64 resources: irq:16 memory:f7ffe000-f7ffefff *-usb:2 description: USB Controller product: SB700/SB800 USB EHCI Controller vendor: ATI Technologies Inc physical id: 12.2 bus info: pci@0000:00:12.2 version: 00 width: 32 bits clock: 66MHz capabilities: pm debug ehci bus_master cap_list configuration: driver=ehci_hcd latency=64 resources: irq:17 memory:f7fff800-f7fff8ff *-usb:3 description: USB Controller product: SB700/SB800 USB OHCI0 Controller vendor: ATI Technologies Inc physical id: 13 bus info: pci@0000:00:13.0 version: 00 width: 32 bits clock: 66MHz capabilities: ohci bus_master configuration: driver=ohci_hcd latency=64 resources: irq:18 memory:f7ffb000-f7ffbfff *-usb:4 description: USB Controller product: SB700 USB OHCI1 Controller vendor: ATI Technologies Inc physical id: 13.1 bus info: pci@0000:00:13.1 version: 00 width: 32 bits clock: 66MHz capabilities: ohci bus_master configuration: driver=ohci_hcd latency=64 resources: irq:18 memory:f7ffc000-f7ffcfff *-usb:5 description: USB Controller product: SB700/SB800 USB EHCI Controller vendor: ATI Technologies Inc physical id: 13.2 bus info: pci@0000:00:13.2 version: 00 width: 32 bits clock: 66MHz capabilities: pm debug ehci bus_master cap_list configuration: driver=ehci_hcd latency=64 resources: irq:19 memory:f7fff400-f7fff4ff *-serial UNCLAIMED description: SMBus product: SBx00 SMBus Controller vendor: ATI Technologies Inc physical id: 14 bus info: pci@0000:00:14.0 version: 3c width: 32 bits clock: 66MHz capabilities: ht cap_list configuration: latency=0 *-ide description: IDE interface product: SB700/SB800 IDE Controller vendor: ATI Technologies Inc physical id: 14.1 bus info: pci@0000:00:14.1 logical name: scsi5 version: 00 width: 32 bits clock: 66MHz capabilities: ide msi bus_master cap_list emulated configuration: driver=pata_atiixp latency=64 resources: irq:16 ioport:1f0(size=8) ioport:3f6 ioport:170(size=8) ioport:376 ioport:ff00(size=16) *-cdrom:0 description: DVD reader product: DVDROM DH16NS30 vendor: HL-DT-ST physical id: 0.0.0 bus info: scsi@5:0.0.0 logical name: /dev/cdrom1 logical name: /dev/dvd1 logical name: /dev/scd0 logical name: /dev/sr0 version: 1.00 capabilities: removable audio dvd configuration: ansiversion=5 status=nodisc *-cdrom:1 description: DVD-RAM writer product: DVDRAM GH22NS50 vendor: HL-DT-ST physical id: 0.1.0 bus info: scsi@5:0.1.0 logical name: /dev/cdrom logical name: /dev/cdrw logical name: /dev/dvd logical name: /dev/dvdrw logical name: /dev/scd1 logical name: /dev/sr1 version: TN02 capabilities: removable audio cd-r cd-rw dvd dvd-r dvd-ram configuration: ansiversion=5 status=nodisc *-multimedia description: Audio device product: SBx00 Azalia (Intel HDA) vendor: ATI Technologies Inc physical id: 14.2 bus info: pci@0000:00:14.2 version: 00 width: 64 bits clock: 33MHz capabilities: pm bus_master cap_list configuration: driver=HDA Intel latency=64 resources: irq:16 memory:f7ff4000-f7ff7fff *-isa description: ISA bridge product: SB700/SB800 LPC host controller vendor: ATI Technologies Inc physical id: 14.3 bus info: pci@0000:00:14.3 version: 00 width: 32 bits clock: 66MHz capabilities: isa bus_master configuration: latency=0 *-pci:4 description: PCI bridge product: SBx00 PCI to PCI Bridge vendor: ATI Technologies Inc physical id: 14.4 bus info: pci@0000:00:14.4 version: 00 width: 32 bits clock: 66MHz capabilities: pci subtractive_decode bus_master resources: ioport:e000(size=4096) memory:fbf00000-fbffffff *-network description: Ethernet interface product: 82541PI Gigabit Ethernet Controller vendor: Intel Corporation physical id: 5 bus info: pci@0000:05:05.0 logical name: eth1 version: 05 serial: 00:1b:21:56:f3:60 size: 100MB/s capacity: 1GB/s width: 32 bits clock: 66MHz capabilities: pm pcix bus_master cap_list rom ethernet physical tp 10bt 10bt-fd 100bt 100bt-fd 1000bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=e1000 driverversion=7.3.21-k6-NAPI duplex=full firmware=N/A ip=192.168.1.2 latency=64 link=yes mingnt=255 multicast=yes port=twisted pair speed=100MB/s resources: irq:20 memory:fbfe0000-fbffffff memory:fbfc0000-fbfdffff ioport:ec00(size=64) memory:fbfa0000-fbfbffff *-usb:6 description: USB Controller product: SB700/SB800 USB OHCI2 Controller vendor: ATI Technologies Inc physical id: 14.5 bus info: pci@0000:00:14.5 version: 00 width: 32 bits clock: 66MHz capabilities: ohci bus_master configuration: driver=ohci_hcd latency=64 resources: irq:18 memory:f7ffa000-f7ffafff *-pci:1 description: Host bridge product: Family 10h Processor HyperTransport Configuration vendor: Advanced Micro Devices [AMD] physical id: 101 bus info: pci@0000:00:18.0 version: 00 width: 32 bits clock: 33MHz *-pci:2 description: Host bridge product: Family 10h Processor Address Map vendor: Advanced Micro Devices [AMD] physical id: 102 bus info: pci@0000:00:18.1 version: 00 width: 32 bits clock: 33MHz *-pci:3 description: Host bridge product: Family 10h Processor DRAM Controller vendor: Advanced Micro Devices [AMD] physical id: 103 bus info: pci@0000:00:18.2 version: 00 width: 32 bits clock: 33MHz *-pci:4 description: Host bridge product: Family 10h Processor Miscellaneous Control vendor: Advanced Micro Devices [AMD] physical id: 104 bus info: pci@0000:00:18.3 version: 00 width: 32 bits clock: 33MHz configuration: driver=k10temp resources: irq:0 *-pci:5 description: Host bridge product: Family 10h Processor Link Control vendor: Advanced Micro Devices [AMD] physical id: 105 bus info: pci@0000:00:18.4 version: 00 width: 32 bits clock: 33MHz *-scsi physical id: 1 bus info: usb@2:3 logical name: scsi8 capabilities: emulated scsi-host configuration: driver=usb-storage *-disk:0 description: SCSI Disk physical id: 0.0.0 bus info: scsi@8:0.0.0 logical name: /dev/sdc *-disk:1 description: SCSI Disk physical id: 0.0.1 bus info: scsi@8:0.0.1 logical name: /dev/sdd *-disk:2 description: SCSI Disk physical id: 0.0.2 bus info: scsi@8:0.0.2 logical name: /dev/sde *-disk:3 description: SCSI Disk physical id: 0.0.3 bus info: scsi@8:0.0.3 logical name: /dev/sdf *-network DISABLED description: Ethernet interface physical id: 1 logical name: vboxnet0 serial: 0a:00:27:00:00:00 capabilities: ethernet physical configuration: broadcast=yes multicast=yes

    Read the article

  • Help with force close occurrences in my app

    - by Ken
    This is the last issue with this app. Periodic force close situations. I think something should be on another thread but I'm not sure what. Anyway, I can always count on a freeze on first install. If I wait, eventually (maybe 10 seconds) the app comes around, maybe more. here is an excerpt from logcat--the three lines occur after full layout is displayed and I attempt to touch a [game] 'peg' which should spawn a sprite, but the freeze occurs there. Can anybody tell what the issue might be?: I/System.out( 279): TouchDown (17.0,106.0) I/System.out( 279): checking (17,106 I/System.out( 279): hit for bounds Rect(3, 98 - 32, 130) [FREEZE BEGINS] W/webcore ( 279): Can't get the viewWidth after the first layout W/WindowManager( 60): Key dispatching timed out sending to com.live.brainbuilderfree/com.live.brainbuilderfree.BrainBuilderFree W/WindowManager( 60): Previous dispatch state: null W/WindowManager( 60): Current dispatch state: {{null to Window{43fd87a0 com.live.brainbuilderfree/com.live.brainbuilderfree.BrainBuilderFree paused=false} @ 1295232880017 lw=Window{43fd87a0 com.live.brainbuilderfree/com.live.brainbuilderfree.BrainBuilderFree paused=false} lb=android.os.BinderProxy@440523b8 fin=false gfw=true ed=true tts=0 wf=false fp=false mcf=Window{43fd87a0 com.live.brainbuilderfree/com.live.brainbuilderfree.BrainBuilderFree paused=false}}} I/Process ( 60): Sending signal. PID: 279 SIG: 3 I/dalvikvm( 279): threadid=3: reacting to signal 3 D/dalvikvm( 124): GC_EXPLICIT freed 1754 objects / 106104 bytes in 7365ms I/Process ( 60): Sending signal. PID: 60 SIG: 3 I/dalvikvm( 60): threadid=3: reacting to signal 3 I/dalvikvm( 60): Wrote stack traces to '/data/anr/traces.txt' I/Process ( 60): Sending signal. PID: 263 SIG: 3 I/dalvikvm( 263): threadid=3: reacting to signal 3 I/dalvikvm( 279): Wrote stack traces to '/data/anr/traces.txt' I/Process ( 60): Sending signal. PID: 117 SIG: 3 I/dalvikvm( 117): threadid=3: reacting to signal 3 I/dalvikvm( 117): Wrote stack traces to '/data/anr/traces.txt' I/Process ( 60): Sending signal. PID: 254 SIG: 3 I/Process ( 60): Sending signal. PID: 121 SIG: 3 I/dalvikvm( 121): threadid=3: reacting to signal 3 D/AudioSink( 34): bufferCount (4) is too small and increased to 12 I/System.out( 279): making white sprite I/Process ( 60): Sending signal. PID: 186 SIG: 3 I/Process ( 60): Sending signal. PID: 232 SIG: 3 D/MillennialMediaAdSDK( 279): size: 1 D/MillennialMediaAdSDK( 279): num: 1 D/AdWhirl SDK( 279): Millennial success D/AdWhirl SDK( 279): Will call rotateAd() in 120 seconds I/dalvikvm( 232): threadid=3: reacting to signal 3 I/dalvikvm( 121): Wrote stack traces to '/data/anr/traces.txt' I/Process ( 60): Sending signal. PID: 222 SIG: 3 I/MillennialMediaAdSDK( 279): Millennial ad return success D/MillennialMediaAdSDK( 279): View height: 0 D/MillennialMediaAdSDK( 279): nextUrl: [deleted] I/Process ( 60): Sending signal. PID: 239 SIG: 3 I/Process ( 60): Sending signal. PID: 213 SIG: 3 D/AdWhirl SDK( 279): Added subview D/AdWhirl SDK( 279): Pinging URL: [deleted] I/Process ( 60): Sending signal. PID: 197 SIG: 3 I/dalvikvm( 197): threadid=3: reacting to signal 3 I/Process ( 60): Sending signal. PID: 164 SIG: 3 I/dalvikvm( 164): threadid=3: reacting to signal 3 D/dalvikvm( 279): GC_FOR_MALLOC freed 7735 objects / 639688 bytes in 217ms I/Process ( 60): Sending signal. PID: 124 SIG: 3 I/dalvikvm( 124): threadid=3: reacting to signal 3 I/Process ( 60): Sending signal. PID: 158 SIG: 3 I/dalvikvm( 158): threadid=3: reacting to signal 3 I/Process ( 60): Sending signal. PID: 127 SIG: 3 E/ActivityManager( 60): ANR in com.live.brainbuilderfree (com.live.brainbuilderfree/.BrainBuilderFree) E/ActivityManager( 60): Reason: keyDispatchingTimedOut E/ActivityManager( 60): Load: 3.46 / 1.69 / 0.65 E/ActivityManager( 60): CPU usage from 28095ms to 140ms ago: E/ActivityManager( 60): system_server: 30% = 25% user + 4% kernel / faults: 3119 minor 66 major E/ActivityManager( 60): mediaserver: 11% = 7% user + 4% kernel / faults: 746 minor 17 major E/ActivityManager( 60): com.svox.pico: 1% = 0% user + 1% kernel / faults: 2833 minor 8 major E/ActivityManager( 60): d.process.acore: 1% = 0% user + 0% kernel / faults: 1146 minor 36 major E/ActivityManager( 60): ndroid.launcher: 1% = 0% user + 0% kernel / faults: 852 minor 6 major E/ActivityManager( 60): m.android.phone: 0% = 0% user + 0% kernel / faults: 621 minor 7 major E/ActivityManager( 60): kswapd0: 0% = 0% user + 0% kernel E/ActivityManager( 60): ronsoft.openwnn: 0% = 0% user + 0% kernel / faults: 337 minor 2 major E/ActivityManager( 60): adbd: 0% = 0% user + 0% kernel / faults: 3 minor E/ActivityManager( 60): zygote: 0% = 0% user + 0% kernel / faults: 169 minor E/ActivityManager( 60): events/0: 0% = 0% user + 0% kernel E/ActivityManager( 60): rild: 0% = 0% user + 0% kernel / faults: 103 minor 3 major E/ActivityManager( 60): pdflush: 0% = 0% user + 0% kernel E/ActivityManager( 60): .quicksearchbox: 0% = 0% user + 0% kernel / faults: 61 minor E/ActivityManager( 60): id.defcontainer: 0% = 0% user + 0% kernel / faults: 12 minor E/ActivityManager( 60): +rainbuilderfree: 0% = 0% user + 0% kernel E/ActivityManager( 60): +sh: 0% = 0% user + 0% kernel E/ActivityManager( 60): +app_process: 0% = 0% user + 0% kernel E/ActivityManager( 60): TOTAL: 100% = 76% user + 21% kernel + 2% iowait + 0% irq + 0% softirq I/dalvikvm( 127): threadid=3: reacting to signal 3 I/dalvikvm( 186): threadid=3: reacting to signal 3 D/dalvikvm( 60): GC_FOR_MALLOC freed 3747 objects / 228920 bytes in 609ms I/dalvikvm-heap( 60): Grow heap (frag case) to 4.759MB for 36896-byte allocation I/dalvikvm( 239): threadid=3: reacting to signal 3 D/dalvikvm( 60): GC_FOR_MALLOC freed 226 objects / 9952 bytes in 546ms I/dalvikvm( 213): threadid=3: reacting to signal 3 D/dalvikvm( 60): GC_FOR_MALLOC freed 105 objects / 5816 bytes in 492ms I/dalvikvm-heap( 60): Grow heap (frag case) to 4.815MB for 49188-byte allocation I/dalvikvm( 222): threadid=3: reacting to signal 3 D/dalvikvm( 60): GC_FOR_MALLOC freed 77 objects / 5232 bytes in 546ms I/dalvikvm( 254): threadid=3: reacting to signal 3 D/dalvikvm( 60): GC_FOR_MALLOC freed 105 objects / 55856 bytes in 521ms I/dalvikvm-heap( 60): Grow heap (frag case) to 4.876MB for 98360-byte allocation D/dalvikvm( 60): GC_FOR_MALLOC freed 58 objects / 3632 bytes in 340ms D/dalvikvm( 60): GC_FOR_MALLOC freed 1093 objects / 185256 bytes in 572ms W/WindowManager( 60): Continuing to wait for key to be dispatched I/System.out( 279): TouchMove (117.0,124.0) I/System.out( 279): TouchUP (117.0,124.0) D/dalvikvm( 60): GC_FOR_MALLOC freed 141 objects / 108328 bytes in 564ms I/ARMAssembler( 60): generated scanline__00000077:03515104_00000000_00000000 [ 33 ipp] (47 ins) at [0x313d78:0x313e34] in 11621593 ns W/InputManagerService( 60): Window already focused, ignoring focus gain of: com.android.internal.view.IInputMethodClient$Stub$Proxy@43f66a10 I/dalvikvm( 239): Wrote stack traces to '/data/anr/traces.txt' I/dalvikvm( 263): Wrote stack traces to '/data/anr/traces.txt' etc...

    Read the article

  • Visual Studio Freezing/TFS Window Might be off screen

    - by spilliton
    I am using Visual Studio 2005 with Team Foundation Server. When I right click a file under the source control and choose "compare" VS appears to freeze until I hit escape. My guess is that the window that is supposed to be popping up is somewhere I can't get to. I tried minimizing all the windows that I can and it is nowhere to be found.

    Read the article

  • Windows 7 x64 Solitaire freezes on load

    - by ThatGuyYouKnow
    I upgraded my computer from Vista Home Premium x64 to 7 x64. I was able to use the solitaire application for about 24 hours but since then it freezes when it tries to load. Specifically the program freezes with the title "Solitaire - Loading Resources... (Not Responding)". Any suggestions?

    Read the article

  • Android SDK emulator freezes on a Mac running OS X 10.6 Snow Leopard

    - by Donald Burr
    I'm having trouble running the Android SDK on both of my Macs running OS X 10.6.2 Snow Leopard. This appears to be a 64 bit vs. 32 bit issue, as Snow Leopard now defaults to 64-bit everything, including the Java virtual machine. I found this webpage with instructions on how to get the Android tools to run in the 32-bit Java VM, and I am now able to run the Android GUI tool to download SDK files, create AVM's, etc. However, when I try the Hello World tutorial and get to the point where I run my application under the Android emulator, everything goes south. The emulator appears to start but it hangs (spinning beachball of death cursor) without displaying anything. (This only hangs the emulator; the rest of the system still works fine.) If I follow the exact same steps (minus the 32-bit java hack) in a Windows virtual machine, everything works fine. Googling didn't yield anything useful (except for the 32-bit java hack I spoke of earlier). This occurs on both my Mac Pro tower and 13" MacBook Pro. Does anyone have any suggestions?

    Read the article

  • When tab groups are loaded, Firefox becomes unresponsible for minutes (Unresponsive script)

    - by unor
    I have several tab groups (~ 20) in Firefox. I can start the browser without any problems. However, as soon as I … click at the "Group tabs" icon in the toolbar, or right-click on a tab and hover over "Move to tab group", … Firefox becomes unresponsible/freezes for a rather long time (more than 2 minutes). It seems to load all tab groups (it doesn't load all the pages! I deactivated this in the settings). While this is happening, I get several "Unresponsive script" warnings, like: Script: chrome://global/content/bindings/tabbox.xml:0 (most of the time) Script: chrome://global/content/bindings/tabbox.xml:418 Script: chrome://browser/content/tabview.js:400 Script: chrome://browser/content/tabview.js:522 Script: resource://modules/sessionstore/SessionStore.jsm:3578 Script: resource:///components/PageThumbsProtocol.js:79 (rare) Script: resource://gre/modules/XPCOMUtils.jsm:323 (rare) (probably also other warnings, didn't record them yet, though) On all of these I click "Continue". After ~ 2-3 minutes and 3-5 warnings, I can use Firefox again. Now I can switch tab groups without any problems. Why is this happening? How can I prevent the long loading time? Is there maybe a about:config setting I could try? I started Firefox in Safe Mode (= without any add-ons): the problem still exists.

    Read the article

  • Ubuntu suddenly freezes

    - by tapan
    I've a strange problem with my ubuntu 10.04 installation. Whenever i boot into ubuntu the entire system freezes / hangs soon after (~ 2 mins in). This problem exists on my windows 7 installation too. However if i start World of Warcraft or Warcraft on windows it doesnt hang for the duration i'm playing the game. After i stop playing and exit the game my laptop hangs inside 2 mins. Here is when it gets weirder. If i disconnect the charger, the laptop doesn't hang. However when I start it in ubuntu recovery mode and drop to root shell and use the 'startx' command everything works perfectly. I cannot figure out what the problem is. i have an intel core2duo 2.2ghz processor, intel mobile 965 graphics, 2 GB RAM for more details here is the output of cat /proc/cpuinfo : processor : 0 vendor_id : GenuineIntel cpu family : 6 model : 15 model name : Intel(R) Core(TM)2 Duo CPU T7500 @ 2.20GHz stepping : 11 cpu MHz : 2201.000 cache size : 4096 KB physical id : 0 siblings : 2 core id : 0 cpu cores : 2 apicid : 0 initial apicid : 0 fdiv_bug : no hlt_bug : no f00f_bug : no coma_bug : no fpu : yes fpu_exception : yes cpuid level : 10 wp : yes flags : fpu vme de pse tsc msr pae mce cx8 apic mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe nx lm constant_tsc arch_perfmon pebs bts pni dtes64 monitor ds_cpl vmx est tm2 ssse3 cx16 xtpr pdcm lahf_lm ida tpr_shadow vnmi flexpriority bogomips : 4389.80 clflush size : 64 power management: processor : 1 vendor_id : GenuineIntel cpu family : 6 model : 15 model name : Intel(R) Core(TM)2 Duo CPU T7500 @ 2.20GHz stepping : 11 cpu MHz : 2201.000 cache size : 4096 KB physical id : 0 siblings : 2 core id : 1 cpu cores : 2 apicid : 1 initial apicid : 1 fdiv_bug : no hlt_bug : no f00f_bug : no coma_bug : no fpu : yes fpu_exception : yes cpuid level : 10 wp : yes flags : fpu vme de pse tsc msr pae mce cx8 apic mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe nx lm constant_tsc arch_perfmon pebs bts pni dtes64 monitor ds_cpl vmx est tm2 ssse3 cx16 xtpr pdcm lahf_lm ida tpr_shadow vnmi flexpriority bogomips : 4388.96 clflush size : 64 power management: here is the output of cat /proc/meminfo MemTotal: 2052440 kB MemFree: 55924 kB Buffers: 579352 kB Cached: 821752 kB SwapCached: 704 kB Active: 897124 kB Inactive: 1032256 kB Active(anon): 412140 kB Inactive(anon): 264804 kB Active(file): 484984 kB Inactive(file): 767452 kB Unevictable: 0 kB Mlocked: 0 kB HighTotal: 1178440 kB HighFree: 6012 kB LowTotal: 874000 kB LowFree: 49912 kB SwapTotal: 995988 kB SwapFree: 986616 kB Dirty: 8928 kB Writeback: 0 kB AnonPages: 527596 kB Mapped: 76536 kB Slab: 39480 kB SReclaimable: 21100 kB SUnreclaim: 18380 kB PageTables: 5672 kB NFS_Unstable: 0 kB Bounce: 0 kB WritebackTmp: 0 kB CommitLimit: 2022208 kB Committed_AS: 1856400 kB VmallocTotal: 122880 kB VmallocUsed: 11928 kB VmallocChunk: 104644 kB HugePages_Total: 0 HugePages_Free: 0 HugePages_Rsvd: 0 HugePages_Surp: 0 Hugepagesize: 4096 kB DirectMap4k: 16376 kB DirectMap4M: 892928 kB Also the kern.log doesn't show any errors. What I want to know is what might be the problem, how i could test for it and if there are any solutions I could try. Thanks :).

    Read the article

  • Ubuntu/Windows suddenly freezes

    - by tapan
    I've a strange problem with my ubuntu 10.04 installation. Whenever i boot into ubuntu the entire system freezes / hangs soon after (~ 2 mins in). This problem exists on my windows 7 installation too. However if i start World of Warcraft or Warcraft on windows it doesnt hang for the duration i'm playing the game. After i stop playing and exit the game my laptop hangs inside 2 mins. Here is when it gets weirder. If i disconnect the charger, the laptop doesn't hang. However when I start it in ubuntu recovery mode and drop to root shell and use the 'startx' command everything works perfectly. I cannot figure out what the problem is. i have an intel core2duo 2.2ghz processor, intel mobile 965 graphics, 2 GB RAM for more details here is the output of cat /proc/cpuinfo : processor : 0 vendor_id : GenuineIntel cpu family : 6 model : 15 model name : Intel(R) Core(TM)2 Duo CPU T7500 @ 2.20GHz stepping : 11 cpu MHz : 2201.000 cache size : 4096 KB physical id : 0 siblings : 2 core id : 0 cpu cores : 2 apicid : 0 initial apicid : 0 fdiv_bug : no hlt_bug : no f00f_bug : no coma_bug : no fpu : yes fpu_exception : yes cpuid level : 10 wp : yes flags : fpu vme de pse tsc msr pae mce cx8 apic mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe nx lm constant_tsc arch_perfmon pebs bts pni dtes64 monitor ds_cpl vmx est tm2 ssse3 cx16 xtpr pdcm lahf_lm ida tpr_shadow vnmi flexpriority bogomips : 4389.80 clflush size : 64 power management: processor : 1 vendor_id : GenuineIntel cpu family : 6 model : 15 model name : Intel(R) Core(TM)2 Duo CPU T7500 @ 2.20GHz stepping : 11 cpu MHz : 2201.000 cache size : 4096 KB physical id : 0 siblings : 2 core id : 1 cpu cores : 2 apicid : 1 initial apicid : 1 fdiv_bug : no hlt_bug : no f00f_bug : no coma_bug : no fpu : yes fpu_exception : yes cpuid level : 10 wp : yes flags : fpu vme de pse tsc msr pae mce cx8 apic mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe nx lm constant_tsc arch_perfmon pebs bts pni dtes64 monitor ds_cpl vmx est tm2 ssse3 cx16 xtpr pdcm lahf_lm ida tpr_shadow vnmi flexpriority bogomips : 4388.96 clflush size : 64 power management: here is the output of cat /proc/meminfo MemTotal: 2052440 kB MemFree: 55924 kB Buffers: 579352 kB Cached: 821752 kB SwapCached: 704 kB Active: 897124 kB Inactive: 1032256 kB Active(anon): 412140 kB Inactive(anon): 264804 kB Active(file): 484984 kB Inactive(file): 767452 kB Unevictable: 0 kB Mlocked: 0 kB HighTotal: 1178440 kB HighFree: 6012 kB LowTotal: 874000 kB LowFree: 49912 kB SwapTotal: 995988 kB SwapFree: 986616 kB Dirty: 8928 kB Writeback: 0 kB AnonPages: 527596 kB Mapped: 76536 kB Slab: 39480 kB SReclaimable: 21100 kB SUnreclaim: 18380 kB PageTables: 5672 kB NFS_Unstable: 0 kB Bounce: 0 kB WritebackTmp: 0 kB CommitLimit: 2022208 kB Committed_AS: 1856400 kB VmallocTotal: 122880 kB VmallocUsed: 11928 kB VmallocChunk: 104644 kB HugePages_Total: 0 HugePages_Free: 0 HugePages_Rsvd: 0 HugePages_Surp: 0 Hugepagesize: 4096 kB DirectMap4k: 16376 kB DirectMap4M: 892928 kB Also the kern.log doesn't show any errors. What I want to know is what might be the problem, how i could test for it and if there are any solutions I could try. Thanks :).

    Read the article

  • KB980408: Fix for Explorer freezing: does anyone know what apps cause it?

    - by Ian Boyd
    Microsoft released an update for Windows 7 today: KB980408: The April 2010 stability and reliability update for Windows 7 and Windows Server 2008 R2 is available. The update fixes, among other things: Windows Explorer may stop responding for 30 seconds when a file or a directory is created or renamed after certain applications are installed. i'm not experiencing it on my own Windows 7 machine, but two colleagues at work were experiencing the problem. i would really like to know what applications were causing problems. Microsoft will never call out the misbehaving applications. i want to know what software i should be ridiculing and insulting. And avoid in the future. Did anyone who was experiencing this problem isolate the applications?

    Read the article

  • What is causing random hard freezes on my system? Kaspersky?

    - by Christian Ivicevic
    The last few weeks I experienced a new strange behavior of my computer. Sometimes Windows 7 just freezes with no real reason at all. While listening to music for example the playback hangs and you can hear a very nasty sound. Neither mouse nor keyboard input is handled and everything is just stuck. Using Ubuntu this does not happen, so I think it is just a matter of driver issues or a Windows 7 bug. Furthermore I am really suspicious about Kaspersky (Internet Security 11) and so I let it perform a complete virus scan while no other app is running. At about 50% it happened again and I needed to restart the computer by holding the power button the bad way... A really weird thing is that playing Skyrim this happened once, however music playback did not stop. Only the framerate dropped to 0 and sometimes for a few seconds I am able to move. Therefore I am really confused as furthermore no bluescreen pops up. Memtest told me that everything seems to be alright... Can anyone explain me which data you need about my hardware and software (and which tools tools to use to gather the informatik) to be able to provide any help on my problem?

    Read the article

  • Freeze the indent of a row group in DevExpress GridControl

    - by brader
    I am required to display a DevExpress WinForms GridControl where the rows must be grouped by a date column. When horizontally scrolling the grid, I am required to keep the group row and group indents fixed to the left of the control (so they do not scroll with the columns). I have so far been unable to find any built-in capability for this. There is the ability to fix a column to the left or right side of the control, but the indent is not a true column. FYI, the group row portion is staying "fixed" by handling the drawing of it to always position it at the left. I do not see a way of controlling the drawing of the indent however. Attempts to custom draw an indent have been unsuccessful so far. We are using version 9.3.2.0 of the DevExpress XtraGrid controls for WinForms. Does anyone have any solutions or workarounds that might allow us to at least give the appearance that the group indents are fixed? Thank you!

    Read the article

  • Ubuntu NBR karmic boot freezes at fsck from util-linux-ng 2.16

    - by BlueBill
    Hi all, I have a netbook (emachine e250 - equivalent to an acer aspire one) and I have Ubunutu NBR 9.10 installed on it. Every other cold boot freezes at the following error message: "fsck from util-linux-ng 2.16" There is no disk activity, no activity what so ever. I have left the machine sit for over an hour and nothing. It takes a couple of hard resets to be able to boot properly. Once it boots everything works great (wireless, suspend/resume, etc.)! I have spent the last couple of weeks researching the problem and the only thing that seems to work is setting nolapic in the boot string in grub - it boots every time. Unfortunately, nolapic disables the second core and causes problems with suspend resume. At first I thought it was an fsck problem with the first partition on the hard disk as it is a hidden ntfs partition containing the windows xp recover information. So in /etc/fstab I set the partition so that it would be ignored by fsck. This didn't seem to do anything. I have these partitions: /dev/sda1 - an ntfs recovery partition /dev/sda2 - /boot /dev/sda3 - swap /dev/sda5 - / /dev/sda6 - /home I am running kernel version 2.6.31-19-generic and have all the patches (as indicated by update manager). I also have no splash screen so I can see the boot progress. I have only been using NBR since January, I have been using Ubuntu on my desktop since last June (2009-06). What logs should I be looking at? Is there a log for failed boots? Thanks, Troy

    Read the article

< Previous Page | 8 9 10 11 12 13 14 15 16 17 18 19  | Next Page >