Search Results

Search found 8914 results on 357 pages for 'disk defragmentation'.

Page 12/357 | < Previous Page | 8 9 10 11 12 13 14 15 16 17 18 19  | Next Page >

  • Can't access my accelerated hard disk from msdos after installing linux on ssd cache

    - by Chibueze Opata
    I mistakenly installed Ubuntu on my ssd (forgot my PC actually came with one), when it detected a ~31GiB disk that it wanted to install to, I was a bit confused since I had brought out 30Gb in my primary disk for it, but I clicked continue. After installation, I tried to boot back into my Windows and it brought out some Intel Raid Disk Utility stuff saying I should disable acceleration on a disk something couldn't be found, I canceled it but whatever I tried, recovery tools, setups etc, I couldn't just access the drive which was apparently using the SSD as cache. Since then I've been stuck. I tried setting the 'raid' flag to the disk from 'gParted', still I couldn't. I tried the diskraid utility from windows recover disk, it said it couldn't detect any raid, diskpart sees the partition but doesn't see the volume, when I remove the raid flag, it sees the volume as one of raw type, and I can't access anything. I can however mount the drive from terminal in Ubuntu and access my files, but I don't have any backup media at the moment so I can do a factory re-install. Please how do I go about solving the issue, precisely I would like to know how to boot into the drive again. Thanks!

    Read the article

  • Best Easiest Fastest No Install USB Boot Disk in 4 Simple Steps :)

    - by PearlFactory
    USB Boot Disk When you look how to create USB Boot Disk on the web it is a nightmare   Here is the easiest I use that works for all MS prods At a computer running Windows Vista, Windows 7, or Windows Server 2008, run a command prompt as administrator and execute the following: Make Sure you have all explorer windows closed and nothing referencing the USB i.e a doc open in Word 1. C:\> diskpart DISKPART> list disk [Identify disk # of the USB key] DISKPART> sel disk 1 [assuming 1 was the # from above] DISKPART> clean [CAUTION—will wipe whichever disk is selected] DISKPART> cre part pri DISKPART> active DISKPART> assign DISKPART> format fs=ntfs quick DISKPART> exit C:\> exit 2. Copy the contents of the Windows Server 2008 R2 or any other MS OS  DVD/ISO to the USB key. 3. From the system tray, use the “Safely remove hardware” icon to safely remove the USB key from the computer. This helps ensure that all files have been fully written to the USB key. (Especially after the large file copy) 4. Restart,,,put usb in and Find reference from HP h20195.www2.hp.com/v2/GetPDF.aspx/4AA3-1317ENW.pdf

    Read the article

  • Setting up group disk quotas

    - by Ray
    I am hoping to get some advice in setting up disk quotas. So, I know about: Adding usrquota and grpquota on to /etc/fstab for the file systems that need to be managed. Using edquota to assign disk quotas to users. However, I need to do the last step for multiple users and edquota seems to be a bit troublesome. One solution that I have found is that I can do: sudo edquota -u foo -p bar. This will copy the disk quota of bar to user foo. I was wondering if this is the best solution? I tried setting up group disk quotas but they don't seem to be working. Are group quotas meant to help in the assignment of the same quota to multiple users? Or are they suppose to give a total limit to a set of users? For example, if users A, B, C are in group X then assigning a quota of 20 GB gives each user 20 GB or does it give 20 GB to the entire group X to divide up? I'm interested in doing the former, but not the latter. Right now, I've assigned group disk quotas and they aren't working. So, I guess it is due to my misunderstanding of group disk quotas... My problem is I want to easily give the same quota to multiple users; any suggestions on the best way to do this out of what I've tried above or anything else I may not have thought of? Thank you!

    Read the article

  • Can't remove GPT data from MBR

    - by user2373121
    I am having difficulty getting the Ubuntu installer (and gparted) to recognize the partitions on my MBR type disk. Other operating systems and disk tools read the disk structure and the files on it fine. I have used fixparts to write a new MBR but the issue persists. I assume the issue stems from the Protective MBR data still present on the disk but I am at a loss as to how to remove it while preserving my NTFS data partition. Microsoft Windows [Version 6.1.7601] Copyright (c) 2009 Microsoft Corporation. All rights reserved. c:\Users\mike\Desktop\fixpartsfixparts 3: FixParts 0.8.8 Loading MBR data from 3: Warning: 0xEE partition doesn't start on sector 1. This can cause problems in some OSes. MBR command (? for help): Running gdisk shows Microsoft Windows [Version 6.1.7601] Copyright (c) 2009 Microsoft Corporation. All rights reserved. c:\Users\mike\Desktop\fixparts>gdisk 3: GPT fdisk (gdisk) version 0.8.7 Partition table scan: MBR: MBR only BSD: not present APM: not present GPT: not present *************************************************************** Found invalid GPT and valid MBR; converting MBR to GPT format in memory. THIS OPERATION IS POTENTIALLY DESTRUCTIVE! Exit by typing 'q' if you don't want to convert your MBR partitions to GPT format! *************************************************************** ************************************************************************ Most versions of Windows cannot boot from a GPT disk, and most varieties prior to Vista cannot read GPT disks. Therefore, you should exit now unless you understand the implications of converting MBR to GPT or creating a new GPT disk layout! ************************************************************************ Are you SURE you want to continue? (Y/N): y Command (? for help): p Disk 3:: 2930277168 sectors, 1.4 TiB Logical sector size: 512 bytes Disk identifier (GUID): BFE92CE8-F93D-4141-82B8-816AD06FB36E Partition table holds up to 128 entries First usable sector is 34, last usable sector is 2930277134 Partitions will be aligned on 2048-sector boundaries Total free space is 163846893 sectors (78.1 GiB) Number Start (sector) End (sector) Size Code Name 1 163842048 2930272255 1.3 TiB 0700 Microsoft basic data Command (? for help): r Recovery/transformation command (? for help): o Disk size is 2930277168 sectors (1.4 TiB) MBR disk identifier: 0x00000000 MBR partitions: Number Boot Start Sector End Sector Status Code 1 1 2930277167 primary 0xEE Recovery/transformation command (? for help): q

    Read the article

  • Why my internal hard disk can be ejected?

    - by Bear Bear
    I have 6 hard disks in my computer and one DVD. The disk that I connect to the 6th SATA port is a regular disk. But my Windows 7 64 bit shows it as a removable drive. I can eject my hard disk! Just like a pen drive. If I connect another disk to the 6th port, I can eject that disk too. So it has nothing to do with the physical disk, it must be something related to Windows or BIOS I don't understand why Windows 7 is seeing a normal hard disk as removable. In Computer Management - Disk Management, the disk looks identical to the others - there is nothing there to suggest the drive is different from the others. But in the tray I have the icon to eject it. The motherboard model is ASUS F2A85 V PRO FM2. All the disks are formatted normally, no Dynamic Disk, no RAID, nothing special. How can I tell Windows 7 to treat the disk exactly like the others, so it can't be ejected?

    Read the article

  • Monitor file disk activity programmatically (Windows)

    - by iulianchira
    In Windows 2008R2, in Resource Monitor in the Disk Acitivity section I can see the number of bytes read from/written into files. How can I do this in a programatic manner, prefferably using C# (or Win32 API)? I have looked into WMI and various performance counters, however I cannot figure out if there is something which suits my needs.

    Read the article

  • Automating Disk Cleanup on Windows using commands

    - by Ram
    Hi, I asked this question on MSDN forum but there was no response.. Maybe I had posted in the wrong forum... So I'm posting it again here, hoping that someone might be able to help me out here... I am trying to run Disk Cleanup in the command prompt (and through a C# program) and so I went through all the available options from this link : http://support.microsoft.com/kb/315246 While I am just trying to understand what I can do, it would be good if someone could explain why the drive option /d cannot be set while specifying /sagerun:n Or is it possible, by some way, to run /sagerun for a specific drive? Pls suggest... Thanks, Ram

    Read the article

  • LVM / Device Mapper maps wrong device

    - by DaDaDom
    Hi, I run a LVM setup on a raid1 created by mdadm. md2 is based on sda6 (major:minor 8:6) and sdb6 (8:22). md2 is partition 9:2. The VG on top of md2 has 4 LVs, var, home, usr, tmp. First the problem: While booting it seems as if the device mapper takes the wrong partition for the mapping! Immediately after boot the information is like ~# dmsetup table systemlvm-home: 0 4194304 linear 8:22 384 systemlvm-home: 4194304 16777216 linear 8:22 69206400 systemlvm-home: 20971520 8388608 linear 8:22 119538048 systemlvm-home: 29360128 6291456 linear 8:22 243270016 systemlvm-tmp: 0 2097152 linear 8:22 41943424 systemlvm-usr: 0 10485760 linear 8:22 20971904 systemlvm-var: 0 10485760 linear 8:22 10486144 systemlvm-var: 10485760 6291456 linear 8:22 4194688 systemlvm-var: 16777216 4194304 linear 8:22 44040576 systemlvm-var: 20971520 10485760 linear 8:22 31457664 systemlvm-var: 31457280 20971520 linear 8:22 48234880 systemlvm-var: 52428800 33554432 linear 8:22 85983616 systemlvm-var: 85983232 115343360 linear 8:22 127926656 ~# cat /proc/mdstat Personalities : [raid1] md2 : active (auto-read-only) raid1 sda6[0] 151798080 blocks [2/1] [U_] md0 : active raid1 sda1[0] sdb1[1] 96256 blocks [2/2] [UU] md1 : active raid1 sda2[0] sdb2[1] 2931776 blocks [2/2] [UU] I have to manually "lvchange -an" all LVs, add /dev/sdb6 back to the raid and reactivate the LVs, then all is fine. But it prevents me from automounting the partitions and obviously leads to a bunch of other problems. If everything works fine, the information is like ~$ cat /proc/mdstat Personalities : [raid1] md2 : active raid1 sdb6[1] sda6[0] 151798080 blocks [2/2] [UU] ... ~# dmsetup table systemlvm-home: 0 4194304 linear 9:2 384 systemlvm-home: 4194304 16777216 linear 9:2 69206400 systemlvm-home: 20971520 8388608 linear 9:2 119538048 systemlvm-home: 29360128 6291456 linear 9:2 243270016 systemlvm-tmp: 0 2097152 linear 9:2 41943424 systemlvm-usr: 0 10485760 linear 9:2 20971904 systemlvm-var: 0 10485760 linear 9:2 10486144 systemlvm-var: 10485760 6291456 linear 9:2 4194688 systemlvm-var: 16777216 4194304 linear 9:2 44040576 systemlvm-var: 20971520 10485760 linear 9:2 31457664 systemlvm-var: 31457280 20971520 linear 9:2 48234880 systemlvm-var: 52428800 33554432 linear 9:2 85983616 systemlvm-var: 85983232 115343360 linear 9:2 127926656 I think that LVM for some reason just "takes" /dev/sdb6 which is then missing in the raid. I tried almost all options in the lvm.conf but none seems to work. Below is some more information, like config files. Does anyone have any idea about what is going on here and how to prevent that? If you need any additional information, please let me know Thanks in advance! Dominik The information (off a "repaired" system): ~# cat /etc/debian_version 5.0.4 ~# uname -a Linux kermit 2.6.26-2-686 #1 SMP Wed Feb 10 08:59:21 UTC 2010 i686 GNU/Linux ~# lvm version LVM version: 2.02.39 (2008-06-27) Library version: 1.02.27 (2008-06-25) Driver version: 4.13.0 ~# cat /etc/mdadm/mdadm.conf DEVICE partitions ARRAY /dev/md1 level=raid1 num-devices=2 metadata=00.90 UUID=11e9dc6c:1da99f3f:b3088ca6:c6fe60e9 ARRAY /dev/md0 level=raid1 num-devices=2 metadata=00.90 UUID=92ed1e4b:897361d3:070682b3:3baa4fa1 ARRAY /dev/md2 level=raid1 num-devices=2 metadata=00.90 UUID=601d4642:39dc80d7:96e8bbac:649924ba ~# mount /dev/md1 on / type ext3 (rw,errors=remount-ro) tmpfs on /lib/init/rw type tmpfs (rw,nosuid,mode=0755) proc on /proc type proc (rw,noexec,nosuid,nodev) sysfs on /sys type sysfs (rw,noexec,nosuid,nodev) procbususb on /proc/bus/usb type usbfs (rw) udev on /dev type tmpfs (rw,mode=0755) tmpfs on /dev/shm type tmpfs (rw,nosuid,nodev) devpts on /dev/pts type devpts (rw,noexec,nosuid,gid=5,mode=620) /dev/md0 on /boot type ext3 (rw) /dev/mapper/systemlvm-usr on /usr type reiserfs (rw) /dev/mapper/systemlvm-tmp on /tmp type reiserfs (rw) /dev/mapper/systemlvm-home on /home type reiserfs (rw) /dev/mapper/systemlvm-var on /var type reiserfs (rw) ~# grep -v ^$ /etc/lvm/lvm.conf | grep -v "#" devices { dir = "/dev" scan = [ "/dev" ] preferred_names = [ ] filter = [ "a|/dev/md.*|", "r/.*/" ] cache_dir = "/etc/lvm/cache" cache_file_prefix = "" write_cache_state = 1 sysfs_scan = 1 md_component_detection = 1 ignore_suspended_devices = 0 } log { verbose = 0 syslog = 1 overwrite = 0 level = 0 indent = 1 command_names = 0 prefix = " " } backup { backup = 1 backup_dir = "/etc/lvm/backup" archive = 1 archive_dir = "/etc/lvm/archive" retain_min = 10 retain_days = 30 } shell { history_size = 100 } global { umask = 077 test = 0 units = "h" activation = 1 proc = "/proc" locking_type = 1 fallback_to_clustered_locking = 1 fallback_to_local_locking = 1 locking_dir = "/lib/init/rw" } activation { missing_stripe_filler = "/dev/ioerror" reserved_stack = 256 reserved_memory = 8192 process_priority = -18 mirror_region_size = 512 readahead = "auto" mirror_log_fault_policy = "allocate" mirror_device_fault_policy = "remove" } :~# vgscan -vvv Processing: vgscan -vvv O_DIRECT will be used Setting global/locking_type to 1 File-based locking selected. Setting global/locking_dir to /lib/init/rw Locking /lib/init/rw/P_global WB Wiping cache of LVM-capable devices /dev/block/1:0: Added to device cache /dev/block/1:1: Added to device cache /dev/block/1:10: Added to device cache /dev/block/1:11: Added to device cache /dev/block/1:12: Added to device cache /dev/block/1:13: Added to device cache /dev/block/1:14: Added to device cache /dev/block/1:15: Added to device cache /dev/block/1:2: Added to device cache /dev/block/1:3: Added to device cache /dev/block/1:4: Added to device cache /dev/block/1:5: Added to device cache /dev/block/1:6: Added to device cache /dev/block/1:7: Added to device cache /dev/block/1:8: Added to device cache /dev/block/1:9: Added to device cache /dev/block/253:0: Added to device cache /dev/block/253:1: Added to device cache /dev/block/253:2: Added to device cache /dev/block/253:3: Added to device cache /dev/block/8:0: Added to device cache /dev/block/8:1: Added to device cache /dev/block/8:16: Added to device cache /dev/block/8:17: Added to device cache /dev/block/8:18: Added to device cache /dev/block/8:19: Added to device cache /dev/block/8:2: Added to device cache /dev/block/8:21: Added to device cache /dev/block/8:22: Added to device cache /dev/block/8:3: Added to device cache /dev/block/8:5: Added to device cache /dev/block/8:6: Added to device cache /dev/block/9:0: Already in device cache /dev/block/9:1: Already in device cache /dev/block/9:2: Already in device cache /dev/bsg/0:0:0:0: Not a block device /dev/bsg/1:0:0:0: Not a block device /dev/bus/usb/001/001: Not a block device [... many more "not a block device"] /dev/core: Not a block device /dev/cpu_dma_latency: Not a block device /dev/disk/by-id/ata-SAMSUNG_HD160JJ_S08HJ10L507895: Aliased to /dev/block/8:16 in device cache /dev/disk/by-id/ata-SAMSUNG_HD160JJ_S08HJ10L507895-part1: Aliased to /dev/block/8:17 in device cache /dev/disk/by-id/ata-SAMSUNG_HD160JJ_S08HJ10L507895-part2: Aliased to /dev/block/8:18 in device cache /dev/disk/by-id/ata-SAMSUNG_HD160JJ_S08HJ10L507895-part3: Aliased to /dev/block/8:19 in device cache /dev/disk/by-id/ata-SAMSUNG_HD160JJ_S08HJ10L507895-part5: Aliased to /dev/block/8:21 in device cache /dev/disk/by-id/ata-SAMSUNG_HD160JJ_S08HJ10L507895-part6: Aliased to /dev/block/8:22 in device cache /dev/disk/by-id/ata-SAMSUNG_HD160JJ_S08HJ10L526800: Aliased to /dev/block/8:0 in device cache /dev/disk/by-id/ata-SAMSUNG_HD160JJ_S08HJ10L526800-part1: Aliased to /dev/block/8:1 in device cache /dev/disk/by-id/ata-SAMSUNG_HD160JJ_S08HJ10L526800-part2: Aliased to /dev/block/8:2 in device cache /dev/disk/by-id/ata-SAMSUNG_HD160JJ_S08HJ10L526800-part3: Aliased to /dev/block/8:3 in device cache /dev/disk/by-id/ata-SAMSUNG_HD160JJ_S08HJ10L526800-part5: Aliased to /dev/block/8:5 in device cache /dev/disk/by-id/ata-SAMSUNG_HD160JJ_S08HJ10L526800-part6: Aliased to /dev/block/8:6 in device cache /dev/disk/by-id/dm-name-systemlvm-home: Aliased to /dev/block/253:2 in device cache /dev/disk/by-id/dm-name-systemlvm-tmp: Aliased to /dev/block/253:3 in device cache /dev/disk/by-id/dm-name-systemlvm-usr: Aliased to /dev/block/253:1 in device cache /dev/disk/by-id/dm-name-systemlvm-var: Aliased to /dev/block/253:0 in device cache /dev/disk/by-id/dm-uuid-LVM-rL8Oq2dA7oeRYeu1orJA7Ufnb1kjOyvr25N7CRZpUMzR18NfS6zeSeAVnVT98LuU: Aliased to /dev/block/253:0 in device cache /dev/disk/by-id/dm-uuid-LVM-rL8Oq2dA7oeRYeu1orJA7Ufnb1kjOyvr3TpFXtLjYGEwn79IdXsSCZPl8AxmqbmQ: Aliased to /dev/block/253:1 in device cache /dev/disk/by-id/dm-uuid-LVM-rL8Oq2dA7oeRYeu1orJA7Ufnb1kjOyvrc5MJ4KolevMjt85PPBrQuRTkXbx6NvTi: Aliased to /dev/block/253:3 in device cache /dev/disk/by-id/dm-uuid-LVM-rL8Oq2dA7oeRYeu1orJA7Ufnb1kjOyvrYXrfdg5OSYDVkNeiQeQksgCI849Z2hx8: Aliased to /dev/block/253:2 in device cache /dev/disk/by-id/md-uuid-11e9dc6c:1da99f3f:b3088ca6:c6fe60e9: Already in device cache /dev/disk/by-id/md-uuid-601d4642:39dc80d7:96e8bbac:649924ba: Already in device cache /dev/disk/by-id/md-uuid-92ed1e4b:897361d3:070682b3:3baa4fa1: Already in device cache /dev/disk/by-id/scsi-SATA_SAMSUNG_HD160JJS08HJ10L507895: Aliased to /dev/block/8:16 in device cache /dev/disk/by-id/scsi-SATA_SAMSUNG_HD160JJS08HJ10L507895-part1: Aliased to /dev/block/8:17 in device cache /dev/disk/by-id/scsi-SATA_SAMSUNG_HD160JJS08HJ10L507895-part2: Aliased to /dev/block/8:18 in device cache /dev/disk/by-id/scsi-SATA_SAMSUNG_HD160JJS08HJ10L507895-part3: Aliased to /dev/block/8:19 in device cache /dev/disk/by-id/scsi-SATA_SAMSUNG_HD160JJS08HJ10L507895-part5: Aliased to /dev/block/8:21 in device cache /dev/disk/by-id/scsi-SATA_SAMSUNG_HD160JJS08HJ10L507895-part6: Aliased to /dev/block/8:22 in device cache /dev/disk/by-id/scsi-SATA_SAMSUNG_HD160JJS08HJ10L526800: Aliased to /dev/block/8:0 in device cache /dev/disk/by-id/scsi-SATA_SAMSUNG_HD160JJS08HJ10L526800-part1: Aliased to /dev/block/8:1 in device cache /dev/disk/by-id/scsi-SATA_SAMSUNG_HD160JJS08HJ10L526800-part2: Aliased to /dev/block/8:2 in device cache /dev/disk/by-id/scsi-SATA_SAMSUNG_HD160JJS08HJ10L526800-part3: Aliased to /dev/block/8:3 in device cache /dev/disk/by-id/scsi-SATA_SAMSUNG_HD160JJS08HJ10L526800-part5: Aliased to /dev/block/8:5 in device cache /dev/disk/by-id/scsi-SATA_SAMSUNG_HD160JJS08HJ10L526800-part6: Aliased to /dev/block/8:6 in device cache /dev/disk/by-path/pci-0000:00:0f.0-scsi-0:0:0:0: Aliased to /dev/block/8:0 in device cache /dev/disk/by-path/pci-0000:00:0f.0-scsi-0:0:0:0-part1: Aliased to /dev/block/8:1 in device cache /dev/disk/by-path/pci-0000:00:0f.0-scsi-0:0:0:0-part2: Aliased to /dev/block/8:2 in device cache /dev/disk/by-path/pci-0000:00:0f.0-scsi-0:0:0:0-part3: Aliased to /dev/block/8:3 in device cache /dev/disk/by-path/pci-0000:00:0f.0-scsi-0:0:0:0-part5: Aliased to /dev/block/8:5 in device cache /dev/disk/by-path/pci-0000:00:0f.0-scsi-0:0:0:0-part6: Aliased to /dev/block/8:6 in device cache /dev/disk/by-path/pci-0000:00:0f.0-scsi-1:0:0:0: Aliased to /dev/block/8:16 in device cache /dev/disk/by-path/pci-0000:00:0f.0-scsi-1:0:0:0-part1: Aliased to /dev/block/8:17 in device cache /dev/disk/by-path/pci-0000:00:0f.0-scsi-1:0:0:0-part2: Aliased to /dev/block/8:18 in device cache /dev/disk/by-path/pci-0000:00:0f.0-scsi-1:0:0:0-part3: Aliased to /dev/block/8:19 in device cache /dev/disk/by-path/pci-0000:00:0f.0-scsi-1:0:0:0-part5: Aliased to /dev/block/8:21 in device cache /dev/disk/by-path/pci-0000:00:0f.0-scsi-1:0:0:0-part6: Aliased to /dev/block/8:22 in device cache /dev/disk/by-uuid/13c1262b-e06f-40ce-b088-ce410640a6dc: Aliased to /dev/block/253:3 in device cache /dev/disk/by-uuid/379f57b0-2e03-414c-808a-f76160617336: Aliased to /dev/block/253:2 in device cache /dev/disk/by-uuid/4fb2d6d3-bd51-48d3-95ee-8e404faf243d: Already in device cache /dev/disk/by-uuid/5c6728ec-82c1-49c0-93c5-f6dbd5c0d659: Aliased to /dev/block/8:5 in device cache /dev/disk/by-uuid/a13cdfcd-2191-4185-a727-ffefaf7a382e: Aliased to /dev/block/253:1 in device cache /dev/disk/by-uuid/e0d5893d-ff88-412f-b753-9e3e9af3242d: Aliased to /dev/block/8:21 in device cache /dev/disk/by-uuid/e79c9da6-8533-4e55-93ec-208876671edc: Aliased to /dev/block/253:0 in device cache /dev/disk/by-uuid/f3f176f5-12f7-4af8-952a-c6ac43a6e332: Already in device cache /dev/dm-0: Aliased to /dev/block/253:0 in device cache (preferred name) /dev/dm-1: Aliased to /dev/block/253:1 in device cache (preferred name) /dev/dm-2: Aliased to /dev/block/253:2 in device cache (preferred name) /dev/dm-3: Aliased to /dev/block/253:3 in device cache (preferred name) /dev/fd: Symbolic link to directory /dev/full: Not a block device /dev/hpet: Not a block device /dev/initctl: Not a block device /dev/input/by-path/platform-i8042-serio-0-event-kbd: Not a block device /dev/input/event0: Not a block device /dev/input/mice: Not a block device /dev/kmem: Not a block device /dev/kmsg: Not a block device /dev/log: Not a block device /dev/loop/0: Added to device cache /dev/MAKEDEV: Not a block device /dev/mapper/control: Not a block device /dev/mapper/systemlvm-home: Aliased to /dev/dm-2 in device cache /dev/mapper/systemlvm-tmp: Aliased to /dev/dm-3 in device cache /dev/mapper/systemlvm-usr: Aliased to /dev/dm-1 in device cache /dev/mapper/systemlvm-var: Aliased to /dev/dm-0 in device cache /dev/md0: Already in device cache /dev/md1: Already in device cache /dev/md2: Already in device cache /dev/mem: Not a block device /dev/net/tun: Not a block device /dev/network_latency: Not a block device /dev/network_throughput: Not a block device /dev/null: Not a block device /dev/port: Not a block device /dev/ppp: Not a block device /dev/psaux: Not a block device /dev/ptmx: Not a block device /dev/pts/0: Not a block device /dev/ram0: Aliased to /dev/block/1:0 in device cache (preferred name) /dev/ram1: Aliased to /dev/block/1:1 in device cache (preferred name) /dev/ram10: Aliased to /dev/block/1:10 in device cache (preferred name) /dev/ram11: Aliased to /dev/block/1:11 in device cache (preferred name) /dev/ram12: Aliased to /dev/block/1:12 in device cache (preferred name) /dev/ram13: Aliased to /dev/block/1:13 in device cache (preferred name) /dev/ram14: Aliased to /dev/block/1:14 in device cache (preferred name) /dev/ram15: Aliased to /dev/block/1:15 in device cache (preferred name) /dev/ram2: Aliased to /dev/block/1:2 in device cache (preferred name) /dev/ram3: Aliased to /dev/block/1:3 in device cache (preferred name) /dev/ram4: Aliased to /dev/block/1:4 in device cache (preferred name) /dev/ram5: Aliased to /dev/block/1:5 in device cache (preferred name) /dev/ram6: Aliased to /dev/block/1:6 in device cache (preferred name) /dev/ram7: Aliased to /dev/block/1:7 in device cache (preferred name) /dev/ram8: Aliased to /dev/block/1:8 in device cache (preferred name) /dev/ram9: Aliased to /dev/block/1:9 in device cache (preferred name) /dev/random: Not a block device /dev/root: Already in device cache /dev/rtc: Not a block device /dev/rtc0: Not a block device /dev/sda: Aliased to /dev/block/8:0 in device cache (preferred name) /dev/sda1: Aliased to /dev/block/8:1 in device cache (preferred name) /dev/sda2: Aliased to /dev/block/8:2 in device cache (preferred name) /dev/sda3: Aliased to /dev/block/8:3 in device cache (preferred name) /dev/sda5: Aliased to /dev/block/8:5 in device cache (preferred name) /dev/sda6: Aliased to /dev/block/8:6 in device cache (preferred name) /dev/sdb: Aliased to /dev/block/8:16 in device cache (preferred name) /dev/sdb1: Aliased to /dev/block/8:17 in device cache (preferred name) /dev/sdb2: Aliased to /dev/block/8:18 in device cache (preferred name) /dev/sdb3: Aliased to /dev/block/8:19 in device cache (preferred name) /dev/sdb5: Aliased to /dev/block/8:21 in device cache (preferred name) /dev/sdb6: Aliased to /dev/block/8:22 in device cache (preferred name) /dev/shm/network/ifstate: Not a block device /dev/snapshot: Not a block device /dev/sndstat: stat failed: Datei oder Verzeichnis nicht gefunden /dev/stderr: Not a block device /dev/stdin: Not a block device /dev/stdout: Not a block device /dev/systemlvm/home: Aliased to /dev/dm-2 in device cache /dev/systemlvm/tmp: Aliased to /dev/dm-3 in device cache /dev/systemlvm/usr: Aliased to /dev/dm-1 in device cache /dev/systemlvm/var: Aliased to /dev/dm-0 in device cache /dev/tty: Not a block device /dev/tty0: Not a block device [... many more "not a block device"] /dev/vcsa6: Not a block device /dev/xconsole: Not a block device /dev/zero: Not a block device Wiping internal VG cache lvmcache: initialised VG #orphans_lvm1 lvmcache: initialised VG #orphans_pool lvmcache: initialised VG #orphans_lvm2 Reading all physical volumes. This may take a while... Finding all volume groups /dev/ram0: Skipping (regex) /dev/loop/0: Skipping (sysfs) /dev/sda: Skipping (regex) Opened /dev/md0 RO /dev/md0: size is 192512 sectors Closed /dev/md0 /dev/md0: size is 192512 sectors Opened /dev/md0 RW O_DIRECT /dev/md0: block size is 1024 bytes Closed /dev/md0 Using /dev/md0 Opened /dev/md0 RW O_DIRECT /dev/md0: block size is 1024 bytes /dev/md0: No label detected Closed /dev/md0 /dev/dm-0: Skipping (regex) /dev/ram1: Skipping (regex) /dev/sda1: Skipping (regex) Opened /dev/md1 RO /dev/md1: size is 5863552 sectors Closed /dev/md1 /dev/md1: size is 5863552 sectors Opened /dev/md1 RW O_DIRECT /dev/md1: block size is 4096 bytes Closed /dev/md1 Using /dev/md1 Opened /dev/md1 RW O_DIRECT /dev/md1: block size is 4096 bytes /dev/md1: No label detected Closed /dev/md1 /dev/dm-1: Skipping (regex) /dev/ram2: Skipping (regex) /dev/sda2: Skipping (regex) Opened /dev/md2 RO /dev/md2: size is 303596160 sectors Closed /dev/md2 /dev/md2: size is 303596160 sectors Opened /dev/md2 RW O_DIRECT /dev/md2: block size is 4096 bytes Closed /dev/md2 Using /dev/md2 Opened /dev/md2 RW O_DIRECT /dev/md2: block size is 4096 bytes /dev/md2: lvm2 label detected lvmcache: /dev/md2: now in VG #orphans_lvm2 (#orphans_lvm2) /dev/md2: Found metadata at 39936 size 2632 (in area at 2048 size 194560) for systemlvm (rL8Oq2-dA7o-eRYe-u1or-JA7U-fnb1-kjOyvr) lvmcache: /dev/md2: now in VG systemlvm with 1 mdas lvmcache: /dev/md2: setting systemlvm VGID to rL8Oq2dA7oeRYeu1orJA7Ufnb1kjOyvr lvmcache: /dev/md2: VG systemlvm: Set creation host to rescue. Closed /dev/md2 /dev/dm-2: Skipping (regex) /dev/ram3: Skipping (regex) /dev/sda3: Skipping (regex) /dev/dm-3: Skipping (regex) /dev/ram4: Skipping (regex) /dev/ram5: Skipping (regex) /dev/sda5: Skipping (regex) /dev/ram6: Skipping (regex) /dev/sda6: Skipping (regex) /dev/ram7: Skipping (regex) /dev/ram8: Skipping (regex) /dev/ram9: Skipping (regex) /dev/ram10: Skipping (regex) /dev/ram11: Skipping (regex) /dev/ram12: Skipping (regex) /dev/ram13: Skipping (regex) /dev/ram14: Skipping (regex) /dev/ram15: Skipping (regex) /dev/sdb: Skipping (regex) /dev/sdb1: Skipping (regex) /dev/sdb2: Skipping (regex) /dev/sdb3: Skipping (regex) /dev/sdb5: Skipping (regex) /dev/sdb6: Skipping (regex) Locking /lib/init/rw/V_systemlvm RB Finding volume group "systemlvm" Opened /dev/md2 RW O_DIRECT /dev/md2: block size is 4096 bytes /dev/md2: lvm2 label detected lvmcache: /dev/md2: now in VG #orphans_lvm2 (#orphans_lvm2) with 1 mdas /dev/md2: Found metadata at 39936 size 2632 (in area at 2048 size 194560) for systemlvm (rL8Oq2-dA7o-eRYe-u1or-JA7U-fnb1-kjOyvr) lvmcache: /dev/md2: now in VG systemlvm with 1 mdas lvmcache: /dev/md2: setting systemlvm VGID to rL8Oq2dA7oeRYeu1orJA7Ufnb1kjOyvr lvmcache: /dev/md2: VG systemlvm: Set creation host to rescue. Using cached label for /dev/md2 Read systemlvm metadata (19) from /dev/md2 at 39936 size 2632 /dev/md2 0: 0 16: home(0:0) /dev/md2 1: 16 24: var(40:0) /dev/md2 2: 40 40: var(0:0) /dev/md2 3: 80 40: usr(0:0) /dev/md2 4: 120 40: var(80:0) /dev/md2 5: 160 8: tmp(0:0) /dev/md2 6: 168 16: var(64:0) /dev/md2 7: 184 80: var(120:0) /dev/md2 8: 264 64: home(16:0) /dev/md2 9: 328 128: var(200:0) /dev/md2 10: 456 32: home(80:0) /dev/md2 11: 488 440: var(328:0) /dev/md2 12: 928 24: home(112:0) /dev/md2 13: 952 206: NULL(0:0) Found volume group "systemlvm" using metadata type lvm2 Read volume group systemlvm from /etc/lvm/backup/systemlvm Unlocking /lib/init/rw/V_systemlvm Closed /dev/md2 Unlocking /lib/init/rw/P_global ~# vgdisplay --- Volume group --- VG Name systemlvm System ID Format lvm2 Metadata Areas 1 Metadata Sequence No 19 VG Access read/write VG Status resizable MAX LV 0 Cur LV 4 Open LV 4 Max PV 0 Cur PV 1 Act PV 1 VG Size 144,75 GB PE Size 128,00 MB Total PE 1158 Alloc PE / Size 952 / 119,00 GB Free PE / Size 206 / 25,75 GB VG UUID rL8Oq2-dA7o-eRYe-u1or-JA7U-fnb1-kjOyvr ~# pvdisplay --- Physical volume --- PV Name /dev/md2 VG Name systemlvm PV Size 144,77 GB / not usable 16,31 MB Allocatable yes PE Size (KByte) 131072 Total PE 1158 Free PE 206 Allocated PE 952 PV UUID ZSAzP5-iBvr-L7jy-wB8T-AiWz-0g3m-HLK66Y :~# lvdisplay --- Logical volume --- LV Name /dev/systemlvm/home VG Name systemlvm LV UUID YXrfdg-5OSY-DVkN-eiQe-Qksg-CI84-9Z2hx8 LV Write Access read/write LV Status available # open 2 LV Size 17,00 GB Current LE 136 Segments 4 Allocation inherit Read ahead sectors auto - currently set to 256 Block device 253:2 --- Logical volume --- LV Name /dev/systemlvm/var VG Name systemlvm LV UUID 25N7CR-ZpUM-zR18-NfS6-zeSe-AVnV-T98LuU LV Write Access read/write LV Status available # open 2 LV Size 96,00 GB Current LE 768 Segments 7 Allocation inherit Read ahead sectors auto - currently set to 256 Block device 253:0 --- Logical volume --- LV Name /dev/systemlvm/usr VG Name systemlvm LV UUID 3TpFXt-LjYG-Ewn7-9IdX-sSCZ-Pl8A-xmqbmQ LV Write Access read/write LV Status available # open 2 LV Size 5,00 GB Current LE 40 Segments 1 Allocation inherit Read ahead sectors auto - currently set to 256 Block device 253:1 --- Logical volume --- LV Name /dev/systemlvm/tmp VG Name systemlvm LV UUID c5MJ4K-olev-Mjt8-5PPB-rQuR-TkXb-x6NvTi LV Write Access read/write LV Status available # open 2 LV Size 1,00 GB Current LE 8 Segments 1 Allocation inherit Read ahead sectors auto - currently set to 256 Block device 253:3

    Read the article

  • The Beginner’s Guide to Linux Disk Utilities

    - by Zainul Franciscus
    Knowing how to check the condition of your hard disk is useful to determine when to replace your hard disk. In today’s article, we will show you some Linux disk utilities to diagnose the health of your hard disk. Image by Scoobay Latest Features How-To Geek ETC The Complete List of iPad Tips, Tricks, and Tutorials The 50 Best Registry Hacks that Make Windows Better The How-To Geek Holiday Gift Guide (Geeky Stuff We Like) LCD? LED? Plasma? The How-To Geek Guide to HDTV Technology The How-To Geek Guide to Learning Photoshop, Part 8: Filters Improve Digital Photography by Calibrating Your Monitor The Brothers Mario – Epic Gangland Style Mario Brothers Movie Trailer [Video] Score Awesome Games on the Cheap with the Humble Indie Bundle Add a Colorful Christmas Theme to Your Windows 7 Desktop This Windows Hack Changes the Blue Screen of Death to Red Edit Images Quickly in Firefox with Pixlr Grabber Zoho Writer, Sheet, and Show Now Available in Chrome Web Store

    Read the article

  • Find and free disk space that is unused but unavailable (due to file system error, etc.)

    - by Voyagerfan5761
    Sometimes I get the feeling that if an app such as μTorrent allocates files on my FAT32-formatted flash drive, but then is killed or crashes (as happens more than a few times a month), that space just disappears from my file system. Whether or not that is the case, sometimes I do get a chill from wondering if I've lost hundreds of MB in available storage due to carelessness or malfunctions. Checking my disk with WinDirStat just makes it worse, because I see the huge "<Unknown>" item at the disk root staring at me, eating up well over a gigabyte. It might be FS inefficiency (due to 32 or 64kb sector/cluster size and a lot of tiny files) or it might be a glitch... Is there a tool I can download and run to check my file system and make sure that there aren't any unused allocated blocks on the disk? I want to make sure I'm not losing any disk space to I/O errors, etc.

    Read the article

  • Why do [flush-8:16] and [jbd2/sdb2-8] occasionally use 99.99% disk IO?

    - by ændrük
    Approximately twice a week, the entire graphical interface will lock up for about 10-20 seconds without warning while I am doing simple tasks such as browsing the web or writing a paper. When this happens, GUI elements do not respond to mouse or keyboard input, and the System Monitor applet displays 100% IOWait processor usage. Today, I finally happened to have GNOME Terminal already open when the problem started. Despite other applications such as Google Chrome, Firefox, GNOME Do, and GNOME Panel being unresponsive, the terminal was usable. I ran iotop and observed that commands named [flush-8:16] and [jbd2/sdb2-8] were alternately using 99.99% IO. What are these, and how can I prevent them from causing GUI unresponsiveness? Here is dumpe2fs /dev/sdb2, if it's relevant.

    Read the article

  • When to use Truecrypt, and when not to?

    - by tm77
    I have about 30 (this number will most likely grow over the next few years to 50 or more) unencrypted laptops that I have been tasked to encrypt (entire drive). These machines will be used off site regularly by my users. These machines are running Windows 7 and XP (about 50/50), but more Windows 7 every month. I have experience with Truecrypt, and have had no issues. It appears to be THE solution for a free solution. My concern with Truecrypt is that my users will have 2 passswords needed to login to their machines. Also, I need to choose to either have 1 password for my organization, or carefully document each machine's password (management nightmare). In my mind, choosing between a managed and a free encryption solution is primarily based on the NUMBER of machines that will be encrypted and supported. Two questions: From a management standpoint, what is the tipping point of users where a managed solution would pay for itself over Truecrypt? What are some good third party solutions? (I will consider Bitlocker, but the price to upgrade Windows 7 licenses is a turn-off) I would love to hear from some admins with experience in supporting encrypted machines in a corporate environment. Many thanks in advance!

    Read the article

  • Best defragmentation software?

    - by dentrasi
    I'm currently running Defraggler on my system, as it's fast, seems to be effective, and has a nice clean interface; it's also the program the other techs recommend to me. I've also heard good things about JKDefrag. Which program do you find you get the best results with?

    Read the article

  • Automount of external hard disk

    - by moose
    I have an Intenso 6002560 1TB Memory Station - an external hard disk. This hard disk gets connected via Y-USB cable. When I connect both USB-ends to my Notebook, it gets recognized by my Ubuntu 10.04.4 LTS system: moose@pc07:~$ lsusb [...] Bus 002 Device 005: ID 13fd:1840 Initio Corporation [...] and Disk /dev/sda: 320.1 GB, 320072933376 bytes 255 heads, 63 sectors/track, 38913 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x00065e10 Device Boot Start End Blocks Id System /dev/sda1 * 1 37810 303704064 83 Linux /dev/sda2 37810 38914 8864769 5 Extended /dev/sda5 37810 38914 8864768 82 Linux swap / Solaris Disk /dev/sdc: 1000.2 GB, 1000204886016 bytes 255 heads, 63 sectors/track, 121601 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x0d6ea32a Device Boot Start End Blocks Id System /dev/sdc1 1 121601 976759008+ c W95 FAT32 (LBA) But it did not get mounted: moose@pc07:/dev$ mount -l /dev/sda1 on / type ext4 (rw,errors=remount-ro,user_xattr) proc on /proc type proc (rw,noexec,nosuid,nodev) none on /sys type sysfs (rw,noexec,nosuid,nodev) none on /sys/fs/fuse/connections type fusectl (rw) none on /sys/kernel/debug type debugfs (rw) none on /sys/kernel/security type securityfs (rw) none on /dev type devtmpfs (rw,mode=0755) none on /dev/pts type devpts (rw,noexec,nosuid,gid=5,mode=0620) none on /dev/shm type tmpfs (rw,nosuid,nodev) none on /var/run type tmpfs (rw,nosuid,mode=0755) none on /var/lock type tmpfs (rw,noexec,nosuid,nodev) none on /lib/init/rw type tmpfs (rw,nosuid,mode=0755) binfmt_misc on /proc/sys/fs/binfmt_misc type binfmt_misc (rw,noexec,nosuid,nodev) gvfs-fuse-daemon on /home/moose/.gvfs type fuse.gvfs-fuse-daemon (rw,nosuid,nodev,user=moose) However, I could mount it manually with mount -t vfat /dev/sdc1 /mnt/sdc1 as you can see here: moose@pc07:~$ mount -l /dev/sda1 on / type ext4 (rw,errors=remount-ro,user_xattr) proc on /proc type proc (rw,noexec,nosuid,nodev) none on /sys type sysfs (rw,noexec,nosuid,nodev) none on /sys/fs/fuse/connections type fusectl (rw) none on /sys/kernel/debug type debugfs (rw) none on /sys/kernel/security type securityfs (rw) none on /dev type devtmpfs (rw,mode=0755) none on /dev/pts type devpts (rw,noexec,nosuid,gid=5,mode=0620) none on /dev/shm type tmpfs (rw,nosuid,nodev) none on /var/run type tmpfs (rw,nosuid,mode=0755) none on /var/lock type tmpfs (rw,noexec,nosuid,nodev) none on /lib/init/rw type tmpfs (rw,nosuid,mode=0755) binfmt_misc on /proc/sys/fs/binfmt_misc type binfmt_misc (rw,noexec,nosuid,nodev) gvfs-fuse-daemon on /home/moose/.gvfs type fuse.gvfs-fuse-daemon (rw,nosuid,nodev,user=moose) /dev/sdc1 on /mnt/sdc1 type vfat (rw) edit: Another command: moose@pc07:~$ sudo blkid -o list device fs_type label mount point UUID ---------------------------------------------------------------------------------------------------------------------- /dev/sda1 ext4 / 45eb611b-517e-425b-8057-0391726cccd5 /dev/sda5 swap <swap> e9dc42f3-594c-4b62-874a-305eda5eed41 moose@pc07:~$ blkid -o list device fs_type label mount point UUID ---------------------------------------------------------------------------------------------------------------------- /dev/sda1 ext4 / 45eb611b-517e-425b-8057-0391726cccd5 /dev/sda5 swap <swap> e9dc42f3-594c-4b62-874a-305eda5eed41 /dev/sdc1 /mnt/sdc1 edit: another command: moose@pc07:~$ ls -l /dev/disk/by-uuid/ total 0 lrwxrwxrwx 1 root root 10 2012-09-30 09:31 45eb611b-517e-425b-8057-0391726cccd5 -> ../../sda1 lrwxrwxrwx 1 root root 10 2012-09-30 09:31 e9dc42f3-594c-4b62-874a-305eda5eed41 -> ../../sda5 Here is a link to a Launchpad question about this problem. But I would like it to mount automatically. What do I have to do?

    Read the article

  • How to create VHD disk image from a Linux live system?

    - by Federico
    Once more, I have to resort at the experts here at SuperUser, as my other sources (mainly Google ;-)) didn't prove very helpful... So basically, I would like to create a VHD image of a physical disk to be archived/accessed/maybe even mounted in a virtual machine. Now, there are dozens of articles and tutorials on how to do that on the web, but none that meets exactly the conditions I would like to achieve: I would like the destination file to be a VHD image, as Windows 7 can mount it natively, even over the network and many other programs can use it (VirtualBox, ...) The disk I'm trying to image contains a Windows XP install, so in theory, I could use the disk2vhd utility, but I would like to find a solution that doesn't require booting that Windows XP install (ie keep the disk read-only) Thus I was searching for a solution involving some sort of live system (running from a USB stic or the network) However, all the solutions that I've came across either make use of disk2vhd or use the dd command under linux, which does a complete copy of the disk (ie even empty blocks) and does not output a VHD file. Is there a tool/program under Linux that can directly create a VHD file? Or is is possible to convert a raw disk image created using dd to a VHD file, without allocating space for the empty blocks? How would you proceed? As always, any advice or comment is highly appreciated!!

    Read the article

  • CentOS 5.5 installation on disk image

    - by Dima
    Today, in order to install CentOS 5.5 I'm using kickstart script. I would like to install CentOS on different way: Create disk image (using dd command) Create filesystem on this disk image using mkfs.ext3 Install CentOS on this filesystem Make this disk image bootable (using grub-install) Copy the disk image to the physical hard disk (using dd command) I know to do all these items except 3. Is it possible to do it? If yes, how can I install CentOS on the disk image?

    Read the article

  • limit linux background flush (dirty pages)

    - by korkman
    Background flushing in linux happens when either too much written data is pending (adjustable via /proc/sys/vm/dirty_background_ratio) or a timeout for pending writes is reached (/proc/sys/vm/dirty_expire_centisecs). Unless another limit is being hit (/proc/sys/vm/dirty_ratio), more written data may be cached. Further writes will block. In theory, this should create a background process writing out dirty pages without disturbing other processes. In practice, it does disturb any process doing uncached reading or synchronous writing. Badly. This is because the background flush actually writes at 100% device speed and any other device requests at this time will be delayed (because all queues and write-caches on the road are filled). Is there any way to limit the amount of requests per second the flushing process performs, or otherwise effectively prioritize other device I/O?

    Read the article

  • Disallow user from decrypting the startup disk

    - by Blacklight Shining
    When you enable FileVault's full-disk encryption, it asks for the password of each account on the system to allow every user to decrypt the disk. You can simply choose not to have a user enter their password, and they will not be able to decrypt the disk. However, if you create an account after enabling disk encryption, the user is automatically allowed to decrypt the disk. How do I disallow a user from decrypting the startup disk?

    Read the article

  • Ubuntu 12.04.1 LTS USB not being detected after formatting with Startup Disk Creator

    - by Zach
    sudo fdisk -l lists the drive, however, I cannot find it in the file explorer. Disk /dev/sda: 250.1 GB, 250059350016 bytes 255 heads, 63 sectors/track, 30401 cylinders, total 488397168 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x000d871e Device Boot Start End Blocks Id System /dev/sda1 * 2048 486322175 243160064 83 Linux /dev/sda2 486324222 488396799 1036289 5 Extended /dev/sda5 486324224 488396799 1036288 82 Linux swap / Solaris Disk /dev/sdb: 8195 MB, 8195480064 bytes 253 heads, 62 sectors/track, 1020 cylinders, total 16006797 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x00027ae4 Device Boot Start End Blocks Id System /dev/sdb1 * 62 15999719 M 7999829 c W95 FAT32 (LBA) Manually mounting it produces this error message :~$ sudo mount -t vfat /dev/sdb1 /media/external -ouiduid=1000,gid=1000,utf8,dmask=027,fmask=137 mount: wrong fs type, bad option, bad superblock on /dev/sdb1, missing codepage or helper program, or other error In some cases useful info is found in syslog - try dmesg | tail or so Is the usb toast?

    Read the article

  • Sparse virtual machine disk image resizing weirdness?

    - by Matt H
    I have a partitioned virtual machine disk image created by vmware. What I want to do is resize that by 10GB. The file size is showing as 64424509440. Or 60GB. So I ran this: dd if=/dev/zero of=./win7.img seek=146800640 count=0 It ran without errors and I can verify the new size is in fact 75161927680 bytes or 70GB. This is where it gets a little odd. I started the guest domain in xen which is a Windows 7 enterprise machine. What I was expecting to see in diskmgmt.msc is 2 partitions. 1 system partition at the start of around 100MB and near 60GB partition (which is C drive) followed by around 10GB of free space. Actually what I saw was a 70GB partition!?! That confused me... so I decided to run the Check Disk which when you set it on the C drive it asks you to reboot so it'll run on boot. So I did that and during the boot it ran the checks. It got all the way through stage 3 and didn't show any errors at all. Looked at the partitions in disk manager and now C drive has shrunk back to 60GB and there is no free space. What gives? Ok, I thought I'd try mounting it under Dom0 and examining it with fdisk. This is what I get when mounted sudo xl block-attach 0 tap:aio:/home/xen/vms/otoy_v1202-xen.img xvda w sudo fdisk -l /dev/xvda Disk /dev/xvda: 64.4 GB, 64424509440 bytes 255 heads, 63 sectors/track, 7832 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x582dfc96 Device Boot Start End Blocks Id System /dev/xvda1 * 1 13 102400 7 HPFS/NTFS Partition 1 does not end on cylinder boundary. /dev/xvda2 13 7833 62810112 7 HPFS/NTFS Note the cylinder boundary comment. When I run sudo cfdisk /dev/xvda I get: FATAL ERROR: Bad primary partition 1: Partition ends in the final partial cylinder Press any key to exit cfdisk So I guess this is a bigger problem than first thought. How can I fix this? EDIT: Oops, the cylinder boundary thing is not a problem at all since disks have used LBA etc. So that threw me for a moment... still the problem exists... Now this output looks a little different. sudo sfdisk -uS -l /dev/xvda Disk /dev/xvda: 7832 cylinders, 255 heads, 63 sectors/track Units = sectors of 512 bytes, counting from 0 Device Boot Start End #sectors Id System /dev/xvda1 * 2048 206847 204800 7 HPFS/NTFS /dev/xvda2 206848 125827071 125620224 7 HPFS/NTFS /dev/xvda3 0 - 0 0 Empty /dev/xvda4 0 - 0 0 Empty BTW: I do have a backup of the image so if you help me mess it up that's ok. EDIT: sudo parted /dev/xvda print free Model: Xen Virtual Block Device (xvd) Disk /dev/xvda: 64.4GB Sector size (logical/physical): 512B/512B Partition Table: msdos Number Start End Size Type File system Flags 32.3kB 1049kB 1016kB Free Space 1 1049kB 106MB 105MB primary ntfs boot 2 106MB 64.4GB 64.3GB primary ntfs 64.4GB 64.4GB 1049kB Free Space Cool. Linux is showing free space is 10GB which is what I expect. The problem is windows isn't seeing this?

    Read the article

  • MSA20 RAID5 recovery failure due to URE on another disk

    - by Andrey
    I have MSA20 with one disk array on 12 disks and 3 LUNs on it (each raid 5). A few days ago one disk in one of the LUNs was failed and I replaced it. But raid5 recovering failed at 13% and I see in ADU report that one of the disk has "Errors Logged = 5566" and according SCSI specifications it is URE (Sense Code=0x11, Qualifier=0x00). In serial log I also see URE error. It seems that Raid5 can't be rebuilt because of this. So I have a few questions: Is there a way to recover raid5 still? If I leave new disk that was replaced and remove disk with URE, will other LUNs be destroyed or just failed LUN? If all LUNs will fail what is the sense to make each LUN with own raid on one disk group array if 2 failed disk can destroy all? As I understand the preferred way is to create one disk array for one LUN in future and not one array with few LUNs? Thanks.

    Read the article

  • Ubuntu doesn't "see" external USB Hard Disk

    - by Mina Michael
    It's NTFS. It's USB2. I'm using Ubuntu 13.04. It works perfectly fine on Windows (which excludes cable and hardware problems). I have two Ubuntu computers and it's not detected on either. It's about 500 GB. Edits: Following the first link, I input sudo lsusb in a terminal; before and after connecting the HDD. The difference was Bus 001 Device 012: ID 14cd:6116 Super Top M6116 SATA Bridge. There it is! ("sata bridge" used to appear in a windows notification when I plugged in the HDD in!). ...This means that Ubuntu detects it but is it not mounting it? I tried this: sudo mount /dev/sdb1 /mnt But gives this: mount: special device /dev/sdb1 does not exist I also tried: sudo mount /dev/sdc1 /mnt but it stays with no output forever. I left it in background for about 30 min.s. sudo fdisk -l gives out this: Disk /dev/sda: 160.0 GB, 160041885696 bytes 255 heads, 63 sectors/track, 19457 cylinders, total 312581808 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0xa42d04a3 Device Boot Start End Blocks Id System /dev/sda1 63 80324 40131 de Dell Utility /dev/sda2 * 80325 102481919 51200797+ 7 HPFS/NTFS/exFAT /dev/sda3 263874558 312580095 24352769 5 Extended /dev/sda4 102481920 263872511 80695296 7 HPFS/NTFS/exFAT /dev/sda5 263874560 310505471 23315456 83 Linux /dev/sda6 310507520 312580095 1036288 82 Linux swap / Solaris Partition table entries are not in disk order Disk /dev/sdc: 500.1 GB, 500107862016 bytes 255 heads, 63 sectors/track, 60801 cylinders, total 976773168 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x5822aaea Device Boot Start End Blocks Id System /dev/sdc1 2048 976769023 488383488 7 HPFS/NTFS/exFAT The part below "Partition table entries are not in disk order" takes about 5 minutes to appear. The outputs of ls /dev/ | grep sd before and after connecting the HDD: before: sda sda1 sda2 sda3 sda4 sda5 sda6 ,after: sda sda1 sda2 sda3 sda4 sda5 sda6 sdd sdd1 The second output has the lines sdd and sdd1 different from the first one. IT SHOWED THE FILES!! The command sudo mount /dev/sdd1 /mnt worked after I typed in sudo fdisk -l!!! Thanks a million!! :) :)

    Read the article

  • Problem in booting Windows Vista after repairing using a boot repair disk

    - by Pubudu
    Been using Vista and I recently installed Ubuntu 11 in a separate hard disk(in BIOS, this hard disk was set for the 'Boot from' option)..Apart from the partitions used for Ubuntu, there are 2 more partitions(NTFS) in that hard disk..Then I installed Windows 7 on one of those partitions (just to see which Windows operating system I'd like to keep on using, along with Ubuntu)..But after installing Windows 7, the OS selection menu didn't appear anymore and had to fix it using the Boot-Repair-Disk... It kinda worked.. Now the OS selection menu is displayed.. But whenever I select Vista, it boots Windows 7...any thoughts on how to fix this? here's the link to the log generated by boot repair http://paste.debian.net/202691 I'm new to Ubuntu btw..

    Read the article

< Previous Page | 8 9 10 11 12 13 14 15 16 17 18 19  | Next Page >