Search Results

Search found 12925 results on 517 pages for 'email routing'.

Page 12/517 | < Previous Page | 8 9 10 11 12 13 14 15 16 17 18 19  | Next Page >

• Dial-in VPN Routing issue when on 192.168.x.x network range

  - by Ian

  I'm not an expert on networks but have a small office on the 192.168.x.x. range which is managed by a vigor (2800) router. I have enabled the VPN dial-in option on the router so I can get to the server on 192.168.1.100 which works fine from my macbook when i'm NOT on a local network with that is on the 192.168.x.x range. e.g. works fine when I tether over my Android smartphone but when I try & connect when on my home network, it connects, I can access the router (192.168.1.1) but cannot access 192.168.1.100 - traceroute doesn't hop via 192.168.1.1 I have enabled "send all traffic over VPN connection but again, not joy... Feels like the osx platform isn't routing the traffic out to the vpn endpoint as the destination address is on the local subnet but expect it would be. This work fine on a windows PC on the same home network. Any thoughts on what the issue could be?

  Read the article

• ping alternative to measure routing distance (on Windows)

  - by Marco Demaio

  Hello, in order to measure aprroximately the rouitng distance (to see if a server is close to my country or too far away) I usually use ping command. I'm in Italy, when I ping Italian servers I get 36ms when I ping US EAST servers I get an average of 120ms when I ping US WEST servers I get an average of 200ms etc. Unfortunately some web hosters turn off the ping reply on their servers, so my question is how do I detect the routing distance, is there another easy to use command in Windows to accomplish the same task? Thanks!

  Read the article

• ip routing policy in linux

  - by Dragos

  I have a linux system with two network interfaces (eth0 in x.x.x.0 and eth1 in x.x.y.0). Is there any posibility to add some route policy to send all the traffic to network x.x.y.0. I would like even the traffic from eth0 to be send to eth1's network. I cannot delete the direct connected networks from the routing table so all the traffic from x.x.x.0 network is send to eth0. I would like to send all traffic to eth1.

  Read the article

• OpenBSD Routing Problem

  - by Ozkan SENOVA

  I am running OpenBSD on a network appliance hardware. It has 5 NICs. I want to give different IP's in same subnet to 3 nics. Eg: em0: 192.168.1.5 em1: 192.168.1.90 em2: 192.168.1.56 I make the necessary configuration with ifconfig, all interfaces works as expected when all the ethernet ports are plugged in to switch. But there is something wrong in routing. If I connect to 192.16.1.5 via any service(http, smtp etc.), traffic goes over link#3. If I unpug the cable from em2 I can't reach any IP's binded on device. Is there any way to route traffic over different links in this IP configuration?

  Read the article

• Routing using Linux with 2 NIC cards

  - by Kevin Parker

  Configured Clear OS to be in Gateway mode on a machine with two NIC cards. eth0:192.168.2.0/24 with ip 192.168.2.27 which is connected to a modem and thus have internet connectivity. eth1:192.168.122.0/24 with ip 192.168.122.10 which is connected to other machines in LAN through switch. LAN machines with network 192.168.122.0 is not getting internet.How can they get internet Through Clear OS gateway.I have enabled packet forwarding in clear os using "ip_forward=1" What am i missing?.Can you please help me in this. Following are the static routing i have added: on LAN machine1 with ip address 192.168.122.11 ip route add 192.168.2.0/24 via 192.168.122.10 dev eth0 ip route show 192.168.2.0/24 via 192.168.122.10 dev eth0 192.168.122.0/24 dev eth0 proto kernel scope link src 192.168.122.11 But still 192.168.2.0/24 network is not reachable.Where can be the problem??

  Read the article

• What does path finding in internet routing do and how is it different from A*?

  - by alan2here

  Note: If you don't understand this question then feel free to ask clarification in the comments instead of voting down, it might be that this question needs some more work at the moment. I've been directed here from the Stack Excange chat room Root Access because my question didn't fit on Super User. In many aspects path finding algorithms like A star are very similar to internet routing. For example: A node in an A* path finding system can search for a path though edges between other nodes. A router that's part of the internet can search for a route though cables between other routers. In the case of A*, open and closed lists are kept by the system as a whole, sepratly from any individual node as well as each node being able to temporarily store a state involving several numbers. Routers on the internet seem to have remarkable properties, as I understand it: They are very performant. New nodes can be added at any time that use a free address from a finite (not tree like) address space. It's real routing, like A*, there's never any doubling back for example. Similar IP addresses don't have to be geographically nearby. The network reacts quickly to changes to the networks shape, for example if a line is down. Routers share information and it takes time for new IP's to be registered everywhere, but presumably every router doesn't have to store a list of all the addresses each of it's directions leads most directly to. I'm looking for a basic, general, high level description of the algorithms workings from the point of view of an individual router. Does anyone have one? I presume public internet routers don't use A* as the overheads would be to large, and scale to poorly. I also presume there is a single method worldwide because it seems as if must involve a lot of transferring data to update and communicate a reasonable amount of state between neighboring routers. For example, perhaps the amount of data that needs to be stored in each router scales logarithmically with the number of routers that exist worldwide, the detail and reliability of the routing is reduced over increasing distances, there is increasing backtracking involved in parts of the network that are less geographically uniform or maybe each router really does perform an A* style search, temporarily maintaining open and closed lists when a packet arrives.

  Read the article

• Network Role based routing

  - by Steve Butler

  Apologies my networking skills are a tad rusty. I'm looking for a way to setup a system that gives me the ability to setup Role-based access to specific network resources. For example, i have three private subnets for specific groups, users will need access to one one or more subnets. I'd like to have all client machines on the same subnet/vlan, and then use 802.1x to authorize into a router(NAC device/whatever), the router would then see what user had authenticated(huge plus if it could determine AD group), and then allow routing to one or more of the three private subnets based upon their group membership. I've looked at packetFence, and it appears to work by assigning a client to a VLAN, but i'd still need a way to route some users into different back-end networks.

  Read the article

• Routing connections to passthrough a local machine

  - by xiamx

  Please tell me if what I'm trying to do is feasible. I have a router named "R" which is connected to WAN. R allows adding rules to the routing table. There are numerous of machines connected to the LAN port of R, they all have ip addresses 192.168.1.* assigned with DHCP on R. Among those machines, there's a machine C with ip address 192.168.1.100. I want all traffic of other machines in the subnet to pass-through machine C where some filtering and logging will be done. Is this possible? Is there a name for what I'm trying to do? (so i can do more googling later)

  Read the article

• Selectively routing traffic via ethernet or wifi, with proper DNS (Mac OS X 10.6)

  - by Dan

  When I'm at work, I access various intranet pages as well as the wider Internet through ethernet. However, the company LAN blocks some ports (e.g. Google Calendar). I can get to those through WiFi. So, I gave the Airport priority, and then using route add, I set up selective routing: all intranet traffic goes through the ethernet and everything else via WiFi: sudo route add 10.0.0.0/8 <intranet gateway>. However, there are a number of intranet sites that have their own DNS; i.e., hr.company.com only resolves on the intranet. The only way that I can get the DNS to work properly is to add the internal DNS server to the Airport DNS listing, however I fear that when I go elsewhere and forget, this will break things. What's the right way to get the DNS to resolve using this setup?

  Read the article

• Send Email from worker role (Azure) with attachment in c#

  - by simplyvaibh

  I am trying to send an email(in c#) from worker role(Azure) with an attachment(from blob storage). I am able to send an email but attachment(word document) is blank. The following function is called from worker role. public void sendMail(string blobName) { InitStorage();//Initialize the storage var storageAccount = CloudStorageAccount.FromConfigurationSetting("DataConnectionString"); container = blobStorage.GetContainerReference("Container Name"); CloudBlockBlob blob = container.GetBlockBlobReference(blobName); if (File.Exists("demo.doc")) File.Delete("demo.doc"); FileStream fs = new FileStream("demo.doc", FileMode.OpenOrCreate); blob.DownloadToStream(fs); Attachment attach = new Attachment(fs,"Report.doc"); System.Net.Mail.MailMessage Email = new System.Net.Mail.MailMessage("[email protected]", "[email protected]"); Email.Subject = "Text fax send via email"; Email.Subject = "Subject Of email"; Email.Attachments.Add(attach); Email.Body = "Body of email"; System.Net.Mail.SmtpClient client = new SmtpClient("smtp.live.com", 25); client.DeliveryMethod = SmtpDeliveryMethod.Network; client.EnableSsl = true; client.Credentials = new NetworkCredential("[email protected]", Password); client.Send(Email); fs.Flush(); fs.Close(); Email.Dispose(); } Please tell me where I am doing wrong?

  Read the article

• Send email in wordpress

  - by jul

  hi, I'm trying to send an email using PHP mail() in a wordpress site. I created an empty page http://www.exam-vision.com/request-flip-up-instructions which template includes the php code shown below. When I post the data, isset($_REQUEST['email']) is false, while I can in firebug that the data have been posted correctly. What can be wrong? thanks <?php if (isset($_REQUEST['email'])) //if "email" is filled out, send email { //send email $email = $_REQUEST['email'] ; $subject = $_REQUEST['subject'] ; $message = $_REQUEST['message'] ; mail( "<someemail>", "Subject: $subject", $message, "From: $email" ); echo "Thank you for using our mail form"; } else //if "email" is not filled out, display the form { echo "<form method='post' action='http://www.exam-vision.com/request-flip-up-instructions'> Email: <input name='email' type='text' /><br /> Subject: <input name='subject' type='text' /><br /> Message:<br /> <textarea name='message' rows='15' cols='40'> </textarea><br /> <input type='submit' /> </form>"; } ?>

  Read the article

• GMail suspects confirmation email in stealing personal information

  - by Dennis Gorelik

  When user registers on my web site, web site sends user email confirmation link. Subject: Please confirm your email address Body:Please open this link in your browser to confirm your email address: http://www.postjobfree.com/a/c301718062444f96ba0e358ea833c9b3 This link will expire on: 6/9/2012 8:04:07 PM EST. If my web site sends that email to GMaill (either @gmail.com or another domain that's handled by Google Apps) and that user never emailed to email -- then GMail not only puts the email to spam folder, but also adds prominent red warning:Be careful with this message. Similar messages were used to steal people's personal information. Unless you trust the sender, don't click links or reply with personal information. Learn more That warning really scares many of my users, so they are afraid to open that link and confirm their email. What can I do about it? Ideally I would like that message end up in user's inbox, not spam folder. But at least how do I prevent that scary message? IP address of my mailing server is not blacklisted: http://www.mxtoolbox.com/SuperTool.aspx?action=blacklist%3a208.43.198.72 I use SPF and DKIM signature. Below is the email that ended up in spam folder with that scary red message. Delivered-To: [email protected] Received: by 10.112.84.98 with SMTP id x2csp36568lby; Fri, 8 Jun 2012 17:04:15 -0700 (PDT) Received: by 10.60.25.6 with SMTP id y6mr9110318oef.42.1339200255375; Fri, 08 Jun 2012 17:04:15 -0700 (PDT) Return-Path: Received: from smtp.postjobfree.com (smtp.postjobfree.com. [208.43.198.72]) by mx.google.com with ESMTP id v8si6058193oev.44.2012.06.08.17.04.14; Fri, 08 Jun 2012 17:04:15 -0700 (PDT) Received-SPF: pass (google.com: domain of [email protected] designates 208.43.198.72 as permitted sender) client-ip=208.43.198.72; Authentication-Results: mx.google.com; spf=pass (google.com: domain of [email protected] designates 208.43.198.72 as permitted sender) [email protected]; dkim=pass [email protected] DomainKey-Signature: a=rsa-sha1; c=nofws; q=dns; d=postjobfree.com; s=postjobfree.com; h= received:message-id:mime-version:from:to:date:subject:content-type; b=TCip/3hP1WWViWB1cdAzMFPjyi/aUKXQbuSTVpEO7qr8x3WdMFhJCqZciA69S0HB4 Koatk2cQQ3fOilr4ledCgZYemLSJgwa/ZRhObnqgPHAglkBy8/RAwkrwaE0GjLKup 0XI6G2wPlh+ReR+inkMwhCPHFInmvrh4evlBx/VlA= DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=postjobfree.com; s=postjobfree.com; h=content-type:subject:date:to:from:mime-version:message-id; bh=N59EIgRECIlAnd41LY4HY/OFI+v1p7t5M9yP+3FsKXY=; b=J3/BdZmpjzP4I6GA4ntmi4REu5PpOcmyzEL+6i7y7LaTR8tuc2h7fdW4HaMPlB7za Lj4NJPed61ErumO66eG4urd1UfyaRDtszWeuIbcIUqzwYpnMZ8ytaj8DPcWPE3JYj oKhcYyiVbgiFjLujib3/2k2PqDIrNutRH9Ln7puz4= Received: from sv3035 (sv3035 [208.43.198.72]) by smtp.postjobfree.com with SMTP; Fri, 8 Jun 2012 20:04:07 -0400 Message-ID: MIME-Version: 1.0 From: "PostJobFree Notification" To: [email protected] Date: 8 Jun 2012 20:04:07 -0400 Subject: Please confirm your email address Content-Type: multipart/alternative; boundary=--boundary_107_ffa6a9ea-01dc-40f5-a50c-4c3b3d113f08 ----boundary_107_ffa6a9ea-01dc-40f5-a50c-4c3b3d113f08 Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: quoted-printable Please open this link in your browser to confirm your email addre= ss: =0D=0Ahttp://www.postjobfree.com/a/c301718062444f96ba0e358ea8= 33c9b3 =0D=0AThis link will expire on: 6/9/2012 8:04:07 PM EST. =0D=0A ----boundary_107_ffa6a9ea-01dc-40f5-a50c-4c3b3d113f08 Content-Type: text/html; charset=utf-8 Content-Transfer-Encoding: base64 PGh0bWw+PGhlYWQ+PG1ldGEgaHR0cC1lcXVpdj1Db250ZW50LVR5cGUgY29udGVu dD0idGV4dC9odG1sOyBjaGFyc2V0PXV0Zi04Ij48L2hlYWQ+DQo8Ym9keT48ZGl2 Pg0KUGxlYXNlIG9wZW4gdGhpcyBsaW5rIGluIHlvdXIgYnJvd3NlciB0byBjb25m aXJtIHlvdXIgZW1haWwgYWRkcmVzczo8YnIgLz48YSBocmVmPSJodHRwOi8vd3d3 LnBvc3Rqb2JmcmVlLmNvbS9hL2MzMDE3MTgwNjI0NDRmOTZiYTBlMzU4ZWE4MzNj OWIzIj5odHRwOi8vd3d3LnBvc3Rqb2JmcmVlLmNvbS9hL2MzMDE3MTgwNjI0NDRm OTZiYTBlMzU4ZWE4MzNjOWIzPC9hPjxiciAvPlRoaXMgbGluayB3aWxsIGV4cGly ZSBvbjogNi85LzIwMTIgODowNDowNyBQTSBFU1QuPGJyIC8+DQo8L2Rpdj48L2Jv ZHk+PC9odG1sPg== ----boundary_107_ffa6a9ea-01dc-40f5-a50c-4c3b3d113f08--

  Read the article

• Changing Mac OS X 10.6 Routing after VPN'd In

  - by Matt Rogish

  I have a coffee shop around the corner that I use to do some work when I want to get away from home. They offer free wi-fi and I then use my Mac 10.6 VPN to log into my work network. I have "Send all traffic over VPN connection" checked. Before, their network was 10.0.0.x. I think they got a new router because it's now 192.168.2.x However, this interferes with one of the subnets at work so now I can't visit 192.168.2.x at work. So: 1) Office network: VPN gives IPs as 192.168.1.x. Another network is 192.168.2.x 2) Coffee network: Gives IPs as 192.168.2.x I think if I set a route to send all 2.x traffic over the tunnel, it would blow up my routing to their system, right? What should I do? I know the individual IPs of the servers I want... Maybe I could add each one, or can I add all of them minus the default gateway of their router? How do I set that up "temporarily" in my Mac? Thanks!!

  Read the article

• VMware Server Host-Only Network Routing

  - by Chris

  I have a windows 2008 web server machine running VMware server. I have 3 VM's - All 3 are test servers so security isn't really a concern... each of them running windows 2008 standard and some of them serving web content. My ISP only allows one MAC address to access the physical switch, however they give me 10 public IP addresses to use. My question is, if I put each VM on their own Host only network, how can I route all traffic from a specific public IP on the host, to the corresponding host only adapter, therefore routing to the specific VM? For example: A single physical Adapter on the Host has the following public IP's assigned to it in windows networking: 74.208.14.10 74.208.14.20 74.208.14.30 Each VM is on a host-only network vm1 - 192.168.196.1 vm2 - 192.168.197.1 vm3 - 192.168.198.1 On the host, I want to route all traffic from 74.208.14.10 to VM1 and 74.208.14.20 to VM2 and 74.208.14.30 to vm3 without using VMware NAT, or bridged connections. I want each server to appear to have its own public IP address. My guess is i can modify the route tables somehow, or perhaps in ICS...but i'm not sure how.

  Read the article

• APACHE - PHP - Bounce emails

  - by user1179459

  I want to improve our mail server lists by handling all the bounces we get in our websites. I have a website which has over 8000+ users and another website which as over 1500+ users, they are emailed various notifications every second, ie. job alerts, email alerts, I am using POP connections with EXIM on APACHE server, most scripts are based on PHP language generates email on the fly. Problems i have But some users has registered long time ago and now quite few has bounce email address Some users register with dummy emails like [email protected] which never existed but a valid email address, any chance of stopping this without asking them login to the email account and clicking links which dont work most times.. (too annoying to the end user) Server is sending unnecessary emails can be avoided if i know they dont exists ? Solutions i need to have Is there a way i can download the bounce email list somewhere (WHM/Cpanel), i know exim mail has it but its not readable (i need a file like CSV or something similar to scan them over and write a php script to delete the users from the database ?) I need to know if there is any function in the PHP that can check the existence of the email address on the fly ? so that i can set the email send function in the mailer class to check before it sends out. On the server will bouncing emails are going to eatup lots of server resources ? like memory/cpu on processing them ? or are they are minimal where we dont have to worry about this at all ? May be a opensoruce or linux software to capture them and view them in a report basis and cleaning them up ? I am not a linux expert or server admin but i do lot of PHP coding, so please be descriptive of the solutions specially if they are linux commands Thank you!

  Read the article

• Windows server 2008R2 routing with single NIC

  - by Fabian

  I'm trying to duplicate a Linux server configuration to a windows server 2008R2 box. Basicaly this linux server acts as a router, but it is doing its job with only 1 interface (1 NIC). Here is the network configuration in place (I cannot change it) : INTERNET <== Router (local ip = 194.168.0.3) <== linux Server (ip : 194.168.0.2). The router is configured with a DMZ to 194.168.0.2, and only allow this IP to connect to internet (Cannot change this router configuration). The linux server is configured with a default gateway to 194.168.0.3, with the option : "Act as router". All other computer on the lan have this configuration (given by DHCP) : IP range : 194.168.0.X MASK : 255.255.255.0 Default gateway : 194.168.0.2 And everything is working perfectly. I'm trying to reproduce this way of routing with only one NIC from a windows server 2008R2, but it seems that you cannnot do it with only one NIC (all exemples I see are refering to 2 NIC with 2 different network). Does someone have an idea how to achieved this in Windows server 2008R2 ? Tx you for your help ! Fabian.

  Read the article

• Windows server 2008R2 routing with single NIC

  - by Fabian

  I'm trying to duplicate a Linux server configuration to a windows server 2008R2 box. Basicaly this linux server acts as a router, but it is doing its job with only 1 interface (1 NIC). Here is the network configuration in place (I cannot change it) : INTERNET <== Router (local ip = 194.168.0.3) <== linux Server (ip : 194.168.0.2). The router is configured with a DMZ to 194.168.0.2, and only allow this IP to connect to internet (Cannot change this router configuration). The linux server is configured with a default gateway to 194.168.0.3, with the option : "Act as router". All other computer on the lan have this configuration (given by DHCP) : IP range : 194.168.0.X MASK : 255.255.255.0 Default gateway : 194.168.0.2 And everything is working perfectly. I'm trying to reproduce this way of routing with only one NIC from a windows server 2008R2, but it seems that you cannnot do it with only one NIC (all exemples I see are refering to 2 NIC with 2 different network). Does someone have an idea how to achieved this in Windows server 2008R2 ? Tx you for your help ! Fabian.

  Read the article

• IPv6 Routing / Subnetting

  - by nappo

  Recently I have installed Citrix Xen Server 6.2 on a machine. My Provider (Hetzner) gave me the IPv6 Subnet 2a01:4f8:200:xxxx::/64. Followed an article in the providers wiki (1) i got it working and can assign IPs to my guests (CentOS). However i can't assign a second IP to a single guest - it will result in a timeout. I'm not very familiar with IPv6 routing / subnetting - any help or tips for further troubleshooting is welcome! My Setup: XenServer 6.2 IPv6: 2a01:4f8:200:xxxx::2/112 ip -6 route: 2a01:4f8:200:xxxx::/112 dev xenbr0 proto kernel metric 256 mtu 1500 advmss 1440 hoplimit 0 fe80::1 dev xenbr0 metric 1024 mtu 1500 advmss 1440 hoplimit 0 default via fe80::1 dev xenbr0 metric 1024 mtu 1500 advmss 1440 hoplimit 0 Guest 1 IPv6: 2a01:4f8:200:xxxx::3/64 IPv6: 2a01:4f8:200:xxxx::4/64 ip -6 route: 2a01:4f8:200:xxxx::/64 dev eth0 proto kernel metric 256 mtu 1500 advmss 1440 hoplimit 4294967295 fe80::/64 dev eth0 proto kernel metric 256 mtu 1500 advmss 1440 hoplimit 4294967295 default via fe80::1 dev eth0 metric 1 mtu 1500 advmss 1440 hoplimit 4294967295 Guest 2 IPv6: 2a01:4f8:200:xxxx::5/64 Guest 1 IPv6 is working fine, Guest 2 too. As suggested by the wiki article (1) i split my /64 network into a /112. Is it right to set the host /112 and the guests /64? Why is that?

  Read the article

• Problem routing between directly connected Subnets w/ ASA-5510

  - by Zephyr Pellerin

  This is an issue I've been struggling with for quite some time, with a seemingly simple answer (Aren't all IT problems?). And that is the problem of passing traffic between two directly connected subnets with an ASA While I'm aware that best practice is to have Internet - Firewall - Router, in many cases this isn't possible. For example, In have an ASA with two interfaces, named OutsideNetwork (10.19.200.3/24) and InternalNetwork (10.19.4.254/24). You'd expect Outside to be able to get to, say, 10.19.4.1, or at LEAST 10.19.4.254, but pinging the interface gives only bad news. Result of the command: "ping OutsideNetwork 10.19.4.254" Type escape sequence to abort. Sending 5, 100-byte ICMP Echos to 10.19.4.254, timeout is 2 seconds: ????? Success rate is 0 percent (0/5) Naturally, you'd assume that you could add a static route, to no avail. [ERROR] route Outsidenetwork 10.19.4.0 255.255.255.0 10.19.4.254 1 Cannot add route, connected route exists At this point, you might gander if its a NAT or Access list problem. access-list Outsidenetwork_access_in extended permit ip any any access-list Internalnetwork_access_in extended permit ip any any There is no dynamic nat (or static nat for that matter), and Unnatted traffic is permitted. When I try pinging the above address (10.19.4.254 from Outsidenetwork), I get this error message from level 0 logging (debugging). Routing failed to locate next hop for icmp from NP Identity Ifc:10.19.200.3/0 to Outsidenetwork:10.19.4.1/0 This led me to set same-security traffic permit, and assigned the same, lesser and greater security numbers between the two interfaces. Am I overlooking something obvious? Is there a command to set static routes that are classified higher than connected routes?

  Read the article

• Help with routing table

  - by user68752

  I have tried to find the answer to my question but not really found a clean and easy solution. I have a box (Ubuntu headless 10.04.1 server, with one Ethernet port) on LAN behind a router (running m0n0wall), that I have successfully installed a PPTP device (ppp0) on, this is working flawlessly (following this link) The thing is I want this box to route all it's internet traffic through the VPN tunnel (ppp0 device) but also being able to access the local LAN on 192.168.1.* subnet. I've succeeded a bit with this, but my problem right now is that I have port forwards (e.g. SSH) done in the m0n0wall pointing to this specific box which forces me to do "add routes" to all boxes that want to access this machine through this specific port. For instance a machine with ip xyz.xyz.xyz.xyz needs to have a static route setup in the routing table on the box to be able to access the box. This is the result of route -n xxx.xxx.137.2 192.168.1.1 255.255.255.255 UGH 0 0 0 eth0 xxx.xxx.137.2 0.0.0.0 255.255.255.255 UH 0 0 0 ppp0 192.168.1.0 0.0.0.0 255.255.255.0 U 0 0 0 eth0 yyy.yyy.0.0 192.168.1.1 255.255.0.0 UG 0 0 0 eth0 0.0.0.0 0.0.0.0 0.0.0.0 U 0 0 0 ppp0 Where xxx is the IPs provided from VPN server. yyy.yyy.0.0 is a net that i want to have access to the box, without this I can't access the box from outside the LAN (via port-forwards done in router software, m0n0wall) is there away round this ugly solution?

  Read the article

• Different subnets routing with just one layer 3 switch

  - by GustavoFSx

  Our current network looks like this: Location 1: 2 Layer 2 switches | subnet 192.168.1.0/24 | Firewall for our VPN Location 2: 1 Layer 2 switch | subnet 192.168.3.0/24 | Firewall for our VPN Location 3: 1 Layer 2 switch | subnet 192.168.5.0/24 | Firewall for our VPN We just got a direct fiber connection between location 1 and 2, we also got a new HP V1910 24G layer 3 switch. I tried to follow the instructions on this site, but I can't get it to work. I think our network should look like this: Location 1: HP Switch FIBER to L2 | subnet 192.168.1.0/24 | Firewall for our VPN Location 2: 1 Layer 2 switch | subnet 192.168.3.0/24 | FIBER to L1 Location 3: 1 Layer 2 switch | subnet 192.168.5.0/24 | Firewall for our VPN So, how can I get routing working on our location 2? It's old gateway was a firewall device on ip 192.168.3.1. I'm thinking on creating a VLAN Interface on 192.168.3.1 on the switch for the Location 2. But how will I handle that on the HP switch that has a direct fiber connection with that switch? Please help, I'm not very good with networking.

  Read the article

• Gmail and Live are making all messages from my server as spam.

  - by Ryan Kearney

  I'm getting very weird results here. When my server sends an email to my @hotmail or @gmail account, it's marked as spam. When I send email through my server from Outlook to @hotmail, it doesn't get marked as spam, but it still gets marked as spam in gmail. They seem to get through fine on Yahoo though. My servers hostname A record points to an IP address whose PTR record points back to the same domain name. The TXT record has a SPF record in it to allow email to be sent from that servers IP. I moved from a VPS to a Dedicated server when this started to happen. From what I can see, the email headers are identical. Here's one of my email headers that gmail marks as spam. Some fields were repalced. MYGMAILACCOUNT is the email address of the account the email was addressed to. USER is the name of the account on the system it was sent from HOSTNAME is the servers FQDN IPADDR is the IP Address of the Hostname MYDOMAIN is my domain name Delivered-To: MYGMAILACCOUNT Received: by 10.220.77.82 with SMTP id f18cs263483vck; Sat, 27 Feb 2010 23:58:02 -0800 (PST) Received: by 10.150.16.4 with SMTP id 4mr3886702ybp.110.1267343881628; Sat, 27 Feb 2010 23:58:01 -0800 (PST) Return-Path: <USER@HOSTNAME> Received: from HOSTNAME (HOSTNAME [IPADDR]) by mx.google.com with ESMTP id 17si4604419yxe.134.2010.02.27.23.58.01; Sat, 27 Feb 2010 23:58:01 -0800 (PST) Received-SPF: pass (google.com: best guess record for domain of USER@HOSTNAME designates IPADDR as permitted sender) client-ip=IPADDR; Authentication-Results: mx.google.com; spf=pass (google.com: best guess record for domain of USER@HOSTNAME designates IPADDR as permitted sender) smtp.mail=USER@HOSTNAME Received: from USER by HOSTNAME with local (Exim 4.69) (envelope-from <USER@HOSTNAME>) id 1Nle2K-0000t8-Bd for MYGMAILACCOUNT; Sun, 28 Feb 2010 02:57:36 -0500 To: Ryan Kearney <MYGMAILACCOUNT> Subject: [Email Subject] MIME-Version: 1.0 Content-type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit From: webmaster@MYDOMAIN Message-Id: <E1Nle2K-0000t8-Bd@HOSTNAME> Sender: <USER@HOSTNAME> Date: Sun, 28 Feb 2010 02:57:36 -0500 X-AntiAbuse: This header was added to track abuse, please include it with any abuse report X-AntiAbuse: Primary Hostname - HOSTNAME X-AntiAbuse: Original Domain - gmail.com X-AntiAbuse: Originator/Caller UID/GID - [503 500] / [47 12] X-AntiAbuse: Sender Address Domain - HOSTNAME Anyone have any ideas as to why all mail leaving my server gets marked as spam? EDIT: I already used http://www.mxtoolbox.com/SuperTool.aspx to check if my servers IP's are blacklisted and they are in fact not. That's what I thought at first, but it isn't the case. Update Mar 1, 2010 I received the following email from Microsoft Thank you for writing to Windows Live Hotmail Domain Support. My name is * and I will be assisting you today. We have identified that messages from your IP are being filtered based on the recommendations of the SmartScreen filter. This is the spam filtering technology developed and operated by Microsoft and is built around the technology of machine learning. It learns to recognize what is and isn't spam. In short, we filter incoming emails that look like spam. I am not able to go into any specific details about what these filters specifically entail, as this would render them useless. E-mails from IPs are filtered based upon a combination of IP reputation and the content of individual emails. The reputation of an IP is influenced by a number of factors. Among these factors, which you as a sender can control, are: The IP's Junk Mail Reporting complaint rate The frequency and volume in which email is sent The number of spam trap account hits The RCPT success rate So I'm guessing it has to do with the fact that I got an IP address with little or no history in sending email. I've confirmed that I'm not on any blacklists. I'm guessing it's one of those things that will work itself out in a month or so. I'll post when I hear more.

  Read the article

• Exim and receiving email with large recipient lists

  - by AceJordin

  I have Exim4 running on Debian configured to receive mail on multiple domains. Exim is set to forward all email that is received to one of the domains to another box. This box is configured with a catchall mailbox that everything goes in. My issue is that when an email is sent to the domain, which contains a large amount of addresses (all to the same domain, but different users), Exim will receive the single email over multiple connections. This means that the catchall mailbox receives multiple copies of the single email all containing the full recipient list. For example, I was able to reproduce it by sending an email from my gmail account that contained 500 recipients (eg [email protected]; [email protected]; [email protected]; etc. for a total of 500). Exim received the message as 20 messages (25 recipients per; appears to be a gmail server setting). So the catchall mailbox received 20 messages, each containing all 500 addresses. I'm pretty sure I understand why this is happening but is there any way I can configure Exim to only receive it once, or to combine it into one? Is there anything that can be done on my end, or am I at the mercy of the sending email server? This is causing havoc with a process that polls the catchall mailbox and parses each recipient in each email.

  Read the article

• E-Mails sent from online form are coming in one single mail

  - by HasanGursoy

  I'm using an online form at one of my web sites. Every mail sent from this form is coming in one mail even if the senders IP is different. But I want every single mail to be unique even if the content is same. What I need to do to the mails or which header I need to modify? SmtpClient smtpClient = new SmtpClient(); MailMessage message = new MailMessage(); MailAddress fromAddress = new MailAddress("[email protected]", "NoReply"); MailAddress toAddress = new MailAddress("[email protected]", "Info"); MailAddress toSender = new MailAddress(tEMail.Text, tNameSurname.Text); message.From = fromAddress; message.Bcc.Add(toAddress); message.ReplyTo = toSender; message.Subject = tNameSurname.Text + " : contact"; message.IsBodyHtml = true; message.Body = "some html here"; smtpClient.Send(message);

  Read the article

• Failing to send email on Ubuntu box (Karmic Koala)

  - by user25312

  I have a home network with an XP and Ubuntu (9.10) box. I have created a small test php script for checking that I can send emails from my machine. I am using the same php.ini file with the same [mail settings], yet the file works on my XP box, and fails on the Ubuntu box. I have included the script here, hopefully, someone can spot whats going wrong: <?php // send e-mail to ... $to="[email protected]"; // Your subject $subject="Test Email"; // From //$header="from: test script"; $header='From: host-email-username@hostdomain_here' . "\r\n" . // Your message $message="Hello \r\n"; $message.="This is test\r\n"; $message.="Test again "; // send email $sentmail = mail($to,$subject,$message,$header); // if your email succesfully sent if($sentmail){ echo "Email Has Been Sent ."; } else { echo "Cannot Send Email "; } ?> The emails have been spoofed for obvious reasons, but otherwise, the script is exactly as the one I tested [Edit] I have since installed mailutils package on my Ubuntu box, now the script runs and returns 'Email has been sent'. However, the mail never arrives in my mail inbox (I've waited 1 day so far). Is there something else I need to be looking at?

  Read the article

< Previous Page | 8 9 10 11 12 13 14 15 16 17 18 19  | Next Page >