Search Results

Search found 381 results on 16 pages for 'frozen'.

Page 12/16 | < Previous Page | 8 9 10 11 12 13 14 15 16  | Next Page >

• How can I setup BluePill to Monitor a Rails App Running via Passenger (mod_rails)

  - by Jim Jeffers

  I recently launched a site running phusion passenger. Unfortunately, the site went down due to a frozen thread. I was able to save the server by doing kill -9 to the specific PID. Still though, I thought passenger was able to manage this automatically. I have a server with 1GB of memory running one rails app with passenger allotted up to 7 instances. However, when I came to discover the site went down I found that passenger had spawned 6 instances with one of them using up over 800mb of memory causing the server to swap. As a result I am hoping to setup something like bluepill on the server but I'm slightly confused as to how you go about doing it. Mainly because bluepill expects to start/stop the processes it's monitoring. However, in our case, passenger already restarts processes for us so we only need to monitor the pids of passengers instances and kill them once they've gotten too large. Has anyone here setup BluePill to monitor a rails app running under phusion's passenger? Any insight would be useful.

  Read the article

• asterisk extensions.conf & sip.conf

  - by Josh

  I'm trying to get my Dialplan to work. When I call, the only thing I get is a dial tone to enter extension "no Background(thanks-calling) is played". When extension 123 is dialed, busy signal is triggered and asterisk CLI get frozen. Any help will be appreciate it. Conf files below. ; PSTN on sip.conf [pstn] type=friend host=dynamic context=pstn username=pstn secret=password nat=yes canreinvite=no dtmfmode=rfc2833 qualify=yes insecure=port,invite disallow=all allow=ulaw ; PSTN on extensions.conf [pstn] exten => s,1,Answer exten => s,2,Wait,2 exten => s,4,DigitTimeout,5 exten => s,5,ResponseTimeout,10 exten => s,6,Background(thanks-calling) exten => 0,1,Goto(incoming,123,1) ; (Member Services) [incoming] exten => 123,1,NoOP(${CALLERID}) ; show the caller ID info in the console exten => 123,n,Ringing() exten => 123,n,Answer() exten => 123,n,Playback(silence/1) exten => 123,n,Playback(connecting1) exten => 123,n,Wait(3) exten => 123,n,Dial(SIP/line1,60) exten => 123,n,Congestion

  Read the article

• 100% iowait + drive faults in dmesg

  - by w00t

  Hi, I have a server on which resides a fairly visited web app. It has a raid1 of 2 HDDs, 64MB Buffer, 7200 RPM. Today it started throwing out errors like: kernel: ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen kernel: ata2.00: cmd b0/d0:01:00:4f:c2/00:00:00:00:00/00 tag 0 pio 512 in kernel: res 40/00:00:00:4f:c2/00:00:00:00:00/00 Emask 0x4 (timeout) kernel: ata2.00: status: { DRDY } kernel: ata2: hard resetting link kernel: ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300) kernel: ata2.00: max_sectors limited to 256 for NCQ kernel: ata2.00: max_sectors limited to 256 for NCQ kernel: ata2.00: configured for UDMA/133 kernel: sd 1:0:0:0: timing out command, waited 7s kernel: ata2: EH complete kernel: SCSI device sda: 976773168 512-byte hdwr sectors (500108 MB) kernel: sda: Write Protect is off kernel: SCSI device sda: drive cache: write back All day long it has been in load higher than 10-15. I am monitoring it with atop and it gives some bizarre readings: DSK | sda | busy 100% | read 2 | write 208 | KiB/r 16 | KiB/w 32 | MBr/s 0.00 | MBw/s 0.65 | avq 86.17 | avio 47.6 ms | DSK | sdb | busy 1% | read 10 | write 117 | KiB/r 17 | KiB/w 5 | MBr/s 0.02 | MBw/s 0.07 | avq 4.86 | avio 1.04 ms | I frankly don't understand why only sda is taking all the hit. I do have one process that is constantly writing with 1-2megs but what the hell.. 100% iowait?

  Read the article

• gpg symmetric encryption using pipes

  - by Thomas

  I'm trying to generate keys to lock my drive (using DM-Crypt with LUKS) by pulling data from /dev/random and then encrypting that using GPG. In the guide I'm using, it suggests using the following command: dd if=/dev/random count=1 | gpg --symmetric -a >./[drive]_key.gpg If you do it without a pipe, and feed it a file, it will pop up an (n?)curses prompt for you to type in a password. However when I pipe in the data, it repeats the following message four times and sits there frozen: pinentry-curses: no LC_CTYPE known assuming UTF-8 It also says can't connect to '/root/.gnupg/S.gpg-agent': File or directory doesn't exist, however I am assuming that this doesn't have anything to do with it, since it shows up even when the input is from a file. So I guess my question boils down to this: is there a way to force gpg to accept the passphrase from the command line, or in some other way get this to work, or will I have to write the data from /dev/random to a temporary file, and then encrypt that file? (Which as far as I know should be alright due to the fact that I'm doing this on the LiveCD and haven't yet created the swap, so there should be no way for it to be written to disk.)

  Read the article

• Software Diagnostics Tool recommendations for Debugging a Windows 8 freeze

  - by Stuart

  I've had my HP Pavillion dv6 laptop since last November - and it has had 8GB RAM and a 256GB Crucial M4 SSD installed since the start. I use it for software development and it's had a Windows 8 RTM installation since early September. Yesterday I had to give a presentation at a customer site - so used Powerpoint for the first time since installing Win8... since that point my machine has 'frozen' every 2 hours or so after startup. There doesn't seem to be any easy to see reason behind the freeze - the system just freezes, even if I have left it idle with just a desktop there. My immediate suspicion is that the SSD is the mostly likely cause of the problem. I've looked at some of the questions on here - e.g. How do I troubleshoot hardware issues related to a computer freeze/crash? - but don't really want to start taking my laptop apart. Another suspicion is that this might be related to the WiFi adapter (Broadcom 802.11n) since I have noticed that this doesn't seem to play perfectly with things like Hyper-V in Win8. Can anyone recommend any software diagnostic tools that I can run in order to evaluate the health of the SSD or of other parts of the system? Thanks Stuart P.S. I doubt Powerpoint is the cause of this, but I may use it as an excuse never to use it again... More realistically perhaps something got damaged during travel to the customer site?

  Read the article

• Google Chrome sync: limit for bookmarks & extensions?

  - by Lyubomyr Shaydariv

  Actually, Chrome is my favorite web-browser, and one of its most powerful features is synchronizing the actual data into a Google account. For the last years I gained a lot of bookmarks and from time to time browse the extensions gallery to find new valuable ones. Really, synchronizing between my work and home PC's freed me from manual sync. And for the recent months I experience strange glitches. I guess it may be caused by a lot of stored bookmarks (potentially about 3K [in estimate], but please don't ask why :)) and extensions (about 130 installed but only 10-15 daily used). I can mention the following strange things: Recently added bookmarks sometimes are not synchronized (e.g. I put a bookmark at work, but it's not guaranteed I can see it that evening), despite about:sync indicates a good sync process. Sometimes recently modified bookmarks appear in either (let's call) last at home or last at work bookmark folders. Sometimes bookmarks are not synced at all. (Moreover, Chromium versions may even crash) Extensions are not synced now at all. Perhaps, there's another reason, but Google Mail Checker and Google Reader Notifier do not show indicators of incoming e-mails and news. ... I'm not sure but it looks like I might exceed Chrome internal sync limits... Is it right? Are there any workarounds, or should I make a massive bookmarks/extensions cleanup (I really don't want it :()? I mostly use Google Chrome Canary builds, and the my current one is 12.0.732.0. Thanks in advance. Update #1 (2001-04-19): I removed about 50 extensions that I'm not interested in (or that I consider as trash), and gained pretty some results: The extensions count is below 100 (exactly 97); The chrome://extensions page does not get slow (or even frozen) any more on enabling/disabling/uninstalling extensions; The extensions are seem to be synchronized now again.

  Read the article

• How to diagnose occasional sudden resets?

  - by steve314

  I have a Windows XP system, and have recently upgraded by adding 2 1GB sticks of RAM to the 2x0.5GB already present. Since then, about once per day (the system is used 8+ hours per day), the system has suddenly and unexpectedly reset. On a couple of occasions, the system has frozen completely, only responding to the power button being held in for several seconds to force power off. Nothing at all ever appears in the system event log that might indicate a possible cause - everything seems to suggest business as usual. Sounds like faulty memory - but memtest86+ says otherwise. A full test, taking over an hour, found no issues. The next likely suspicion, then, is that I've knocked something while installing the RAM. Trouble is, everything I can think of to test seems fine. I've opened up the case and prodded a few things around, hoping to get better contact on connections etc, but there's no sign yet as to whether that has made a difference or not. I thought about a malware-related timing fluke, but again, so far as I can tell I'm all clear. All I can think of to add to my checklist (mainly of things that I can't easily check) is... The power supply is (1) only 350W, (2) not necessarily the best quality, and (3) powering a Prescott P4 640 3.2GHz. Could that be borderline overloaded or about to die? How do I check? Is it possible that the CPU isn't getting cooled properly? I haven't had the fan past normal tickover even doing video encoding, and the only sane temperature reading from SpeedFan is pretty steady at 36 celcius, so probably not. Any thoughts? Is there a standard procedure for diagnosing this kind of fault?

  Read the article

• Need for explanation: NetBIOS over TCP/IP on VMware network adapter disturbs access to network share

  - by gyrolf

  (Moved here from StackOverflow) Some time ago nearly all workstations in our team (Windows XP SP2) exhibited intermittend but frequent delays when accessing shares on the network. Typically the first access to a share which hadn't been accessed for some time resulted in a nearly frozen workstation for up to 30 seconds. Then everything started working fine again. Using TCPView from Sysinternals I saw that during this delays there was a connection to the netbios-ssn port on the file server which was in state SYN_SENT. First try: Disable NetBIOS over TCP/IP for the intranet network adapter. Problem solved, but I didn't like to manipulate our centrally managed network configuration for the intranet. Second try: Disable NetBIOS over TCP/IP only for the VMWare network adapter (VMNet1 used for host only communications). Problem solved again! My questions: Why does NetBIOS over TCP/IP on one network adapter disturb NetBIOS over TCP/IP on another network adapter? Is this problem specific to VMWare network adapters? Has anybody else seen this phenomen? Additional information: VMWare Workstation version 6.0.3 At the time I started seriously analysing the problem it was no more possible to find out what had been changed to our systems at the time the problems started.

  Read the article

• Laptop Acer Travelmate 4050 takes over 10 Mins to POST

  - by Belliez

  Hi, I am a computer tech and have received a laptop for repair. I noticed when I turned it on the laptop would not do anything for a min or two (the fan would run up and stop, power led would shine and some cd rom activity then stop). It would sit there with a black screen. Suddenly after a random number of minutes (between 1-20mins!) the Acer BIOS screen would display and POST would happen before booting into Windows XP. It has frozen in XP at various times and pointed towards a CPU fault and over heating. The fan was on its last legs, sounded like a car engine, so I replaced this. Still same issues. I next replaced the CPU like for like. Same problems. Also applied new thermal paste between the cpu and heatsink, when running the fan kicks in occasionally (not as often as I thought it would) and I left it playing mp3, online radio and updating to service pack 3 and it wouldnt freeze. shutting down ok, cold start, not ok. Waits again before showing the BIOS screen. The hard disk was also making a screaming noise (SMART test and chkdsk passed) but I also replaced this. The laptop powers up with and without the battery so dont think its a battery issue. Running out of ideas and wondered if anyone had any advice. Thanks

  Read the article

• System freezes during boot process

  - by slugster

  Hi everyone, i have a machine running Win7 Ultimate. It was running fine, then it just froze - all the stuff i was doing was still on the screen, but mouse and keyboard input was ignored, any animation that was happening on the screen stopped, the machine literally just froze. So i rebooted (power off button), from then on the machine will reboot, but it ultimately freezes again. The instance when this happens will vary - i have made it as far as the Windows login screen, but mostly it will do the POST, then give me the option to press F1 to continue or Del to enter BIOS settings (but of course pressing a key has no effect - it's frozen!). I have disconnected everything not necessary for the boot process, the only peripheral that remains attached is the keyboard. (even the network cable is disconnected). Prior to this the machine was operating fine. The install of Win7 is only 2 days old, and it was a fresh reinstall (i.e. not an upgrade or repair). Can anyone give me an indication of what may be wrong here? I'm not sure if this question should be here or on SuperUser, please migrate it if i have chosen the wrong board.

  Read the article

• Copying compressed files from Server 2008 R2 network share to XP client via VPN fails

  - by Dejan Janjuševic

  At the first sight the question looks similar to this one. I have experienced an odd behavior while trying to copy a certain file from Windows Server 2008 R2 network share to Windows XP Professional client via VPN. The VPN was set up using RRAS on the server machine. I will try to provide as much informations as possible in order to make the issue more clear. When trying to copy the compressed file sized ~2.5 MB (via Explorer or CMD, doesn't matter), the process stalls after some 20%, producing an error message after few seconds: Cannot copy filename: The specified network name is no longer available. If i start the command ping -t 192.168.2.1 (where the IP address specified belongs to the server) side by side with the copy command, I can clearly see that the ping command times out for few seconds as the copy process stalls. When this happens all network activities are frozen. After a few seconds, the network recovers, ping continues to run normally, however the copy process stands still before it displays the above error message. Copying other files (I tried 4-5 files), of which some are larger and some are smaller, succeeds. Seems to me that I can copy all uncompressed files. As soon as I try to copy an archive, the process freezes. Even a 707 KB large archive can't be copied. I can only reproduce this behavior on 2 machines, both Windows XP Professional, one is w/ SP2 and the other w/ SP3. Other XP clients don't have this problem, neither do Windows 7 clients. If I connect to the server using Remote Desktop Connection without using VPN from either of these 2 machines (using the same user account), I can copy anything I want normally, even these "problematic" files. Does anyone have any clue about what could possibly be going on?

  Read the article

• System freezes during boot process

  - by slugster

  Hi everyone, i have a machine running Win7 Ultimate. It was running fine, then it just froze - all the stuff i was doing was still on the screen, but mouse and keyboard input was ignored, any animation that was happening on the screen stopped, the machine literally just froze. So i rebooted (power off button), from then on the machine will reboot, but it ultimately freezes again. The instance when this happens will vary - i have made it as far as the Windows login screen, but mostly it will do the POST, then give me the option to press F1 to continue or Del to enter BIOS settings (but of course pressing a key has no effect - it's frozen!). I have disconnected everything not necessary for the boot process, the only peripheral that remains attached is the keyboard. (even the network cable is disconnected). Prior to this the machine was operating fine. The install of Win7 is only 2 days old, and it was a fresh reinstall (i.e. not an upgrade or repair). Can anyone give me an indication of what may be wrong here? I'm not sure if this question should be here or on SuperUser, please migrate it if i have chosen the wrong board.

  Read the article

• Laptop hangs on POST and does not finish except on rare occasions

  - by user1049697

  I have an old Toshiba Satellite A100 laptop that hangs on POST when I try to start it. On rare occasions it does finish the POST and boots Windows successfully, but most times it just finishes it partially and continues to hang. I can enter the BIOS though when it has frozen, but I have to open the DVD-drive first for some reason. The keyboard is not quite right either, and I can't navigate the BIOS properly because the arrow keys doesn't work. I tried an external keyboard, but the problem persisted. I have tried to remove the memory, hard drive, and battery to see if any of these were the problem, but it did not solve it. The one logical thing left to do would be to remove the CMOS battery, but the "brilliant" engineers at Toshiba have place it such that a complete disassembly of the machine is necessary. What this all boils down to is basically the question of whether I can "save" this machine and get it to boot properly, or if I should just send it off to recycling. I suspect it might need costly repairs, but I can't bring myself to throw it away before I have made sure it's completely dead.

  Read the article

• asterisk extensions.conf & sip.conf

  - by Josh

  I'm trying to get my Dialplan to work. When I call, the only thing I get is a dial tone to enter extension "no Background(thanks-calling) is played". When extension 123 is dialed, busy signal is triggered and asterisk CLI get frozen. Any help will be appreciate it. Conf files below. ; PSTN on sip.conf [pstn] type=friend host=dynamic context=pstn username=pstn secret=password nat=yes canreinvite=no dtmfmode=rfc2833 qualify=yes insecure=port,invite disallow=all allow=ulaw ; PSTN on extensions.conf [pstn] exten => s,1,Answer exten => s,2,Wait,2 exten => s,4,DigitTimeout,5 exten => s,5,ResponseTimeout,10 exten => s,6,Background(thanks-calling) exten => 0,1,Goto(incoming,123,1) ; (Member Services) [incoming] exten => 123,1,NoOP(${CALLERID}) ; show the caller ID info in the console exten => 123,n,Ringing() exten => 123,n,Answer() exten => 123,n,Playback(silence/1) exten => 123,n,Playback(connecting1) exten => 123,n,Wait(3) exten => 123,n,Dial(SIP/line1,60) exten => 123,n,Congestion

  Read the article

• Why I cannot copy install.wim from Windows 7 ISO to USB (in linux env)

  - by fastreload

  I need to make a USB bootable disk of Windows 7 ISO. My USB is formatted to NTFS, ISO is not corrupt. I can copy install.wim elsewhere but I cannot copy it to USB. I even tried rsync. rsync error sources/install.wim rsync: writefd_unbuffered failed to write 4 bytes to socket [sender]: Broken pipe (32) rsync: write failed on "/media/52E866F5450158A4/sources/install.wim": Input/output error (5) rsync error: error in file IO (code 11) at receiver.c(322) [receiver=3.0.8] Stat for windows.vim File: `X15-65732 (2)/sources/install.wim' Size: 2188587580 Blocks: 4274600 IO Block: 4096 regular file Device: 801h/2049d Inode: 671984 Links: 1 Access: (0664/-rw-rw-r--) Uid: ( 1000/ umur) Gid: ( 1000/ umur) Access: 2011-10-17 22:59:54.754619736 +0300 Modify: 2009-07-14 12:26:40.000000000 +0300 Change: 2011-10-17 22:55:47.327358410 +0300 fdisk -l Disk /dev/sdd: 8103 MB, 8103395328 bytes 196 heads, 32 sectors/track, 2523 cylinders, total 15826944 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0xc3072e18 Device Boot Start End Blocks Id System /dev/sdd1 * 32 15826943 7913456 7 HPFS/NTFS/exFAT hdparm -I /dev/sdd: SG_IO: bad/missing sense data, sb[]: 70 00 05 00 00 00 00 0a 00 00 00 00 20 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ATA device, with non-removable media Model Number: UF?F?A????U]r???U u??tF?f?`~ Serial Number: ?@??~| Firmware Revision: ????V? Media Serial Num: $I?vnladip raititnot baelErrrol aoidgn Media Manufacturer: o eparitgns syetmiM Standards: Used: unknown (minor revision code 0x0c75) Supported: 12 8 6 Likely used: 12 Configuration: Logical max current cylinders 17218 0 heads 0 0 sectors/track 128 0 -- Logical/Physical Sector size: 512 bytes device size with M = 1024*1024: 0 MBytes device size with M = 1000*1000: 0 MBytes cache/buffer size = unknown Capabilities: IORDY(may be)(cannot be disabled) Queue depth: 11 Standby timer values: spec'd by Vendor R/W multiple sector transfer: Max = 0 Current = ? Recommended acoustic management value: 254, current value: 62 DMA: not supported PIO: unknown * reserved 69[0] * reserved 69[1] * reserved 69[3] * reserved 69[4] * reserved 69[7] Security: Master password revision code = 60253 not supported not enabled not locked not frozen not expired: security count not supported: enhanced erase 71112min for SECURITY ERASE UNIT. 172min for ENHANCED SECURITY ERASE UNIT. Integrity word not set (found 0xaa55, expected 0x80a5)

  Read the article

• How to troubleshoot when one has no idea where to start?

  - by Chris Walton

  I am looking for hints, tips and answers on how to get started on troubleshooting when: The problem is intermittent The problem could lie literally anywhere - operating system; free source software; my own software developments; purchased software; crumbs on the keyboard; the specific combination of software I am currently running; Maxwell's demon; the little blue men actually running the machine have gone on strike; etc. I have expertise only in a few of the areas that are potential candidates for the cause of the problem. The specific problem I am having is detailed below as an example, but I am not seeking answers to my current problem, but rather where and how to start on tackling such problems. I am currently encountering a problem with my new machine. On a few occasions the machine has just frozen; not accepting keystrokes, mouseclicks, or anything except the power on/off switch. Invariably I have been merely browsing the web; I have had a few (<= 6 other applications) running. None of these applications are major; and represent a mix of commercial programs and open source programs, typically migrated from Unix of some variety. My machine is a Windows 7 I7 quad core laptop.

  Read the article

• How do I diagnose the cause of a freeze after resuming in Windows XP (SP3)?

  - by Software Monkey

  I have just built a new computer from parts. Whenever I resume from any sleep mode (S1, S3 or S4) the computer freezes within about 60 seconds of the welcome screen appearing. I have updated the BIOS and all drivers to current from the motherboard manufacturer's site. I have reset BIOS settings to default, including disabling AMD Cool n Quiet. The windows event logs are not helpful at all. Other than immediately after resuming the system is stable as long as AMD CnQ is disabled. The system is: Mobo : MSI 790GX-G65 CPU : AMD Phenom II 965 BE at 3.6 GHz Memory : Corsair DDR3 1600, at 1333 MHz and 9-9-9-21 HDDs : 1 EIDE, 2 SATA in RAID-0 DVD : 1 Card Reader: 1 multi-card reader Keyboard is attached via PS2 and mouse is USB. Any thoughts or pointers would be most welcome. EDIT: It appears that the computer may not freeze if a program is left running which puts it under significant load. I left a stress test running which keeps all cores under 85% load, and my son put the computer to sleep - while this program is running it I have been able to resume from S3 successfully 4 times, compared against about 20 tests with the computer idle which have all frozen. So this may be related to being in an idle state when it resumes.

  Read the article

• Supermicro X8SIL-F with Enermax Modu82+ 625W PSU booting issue

  - by Richard Whitman

  I am assembling a custom PC. The configuration is below: Motherboard: Supermicro X8SIL-F Processor: Intel Xeon 3430 Power Supply: Enermax Modu82+ 625W. Memory: Kingston KVR1333D3LQ8R9S/8GEC 8GBx1 installed in DimmA1 This power switch: Frozen CPU switch When I turn on the PSU, the motherboard tries to start itself before I even push the power switch. The following happens: The CPU fan rotates like once or twice, and then stops. After 1-2 seconds, the CPU fan tries to rotate again and stops after about one or two rotations. Finally, after another 1-2 seconds, it again starts and this time it rotates for about 3-4 seconds before stopping. If I pull out the Power switch, and turn on the PSU, again the MB turns on itself and the following happens: The CPU fan rotates like once or twice, and then stops. After 1-2 seconds, the CPU fan tries to rotate again and stops after about one or two rotations. Finally, after another 1-2 seconds, it again starts and the system boots properly I am sure there is nothing wrong with any of the components, because I have two sets of identical components (2 MBs, 2 CPUs, 2 PSUs, 2 switches and so on). And both of the systems show the same symptoms. Why is the MB booting up by itself? Why does it fail to boot when the Power Switch is installed? Is something wrong with the type of Power Switch I am using? PS: the power switch is installed correctly, I have double checked the MB manual to make sure its connecting the right pins.

  Read the article

• Ubuntu hard disk getting SATA errors

  - by Henadzy

  I am getting "UNC" errors on a hard disk on Ubuntu 9.10. It slows down my system, applications have not been responding for a long time. But when I mount the filesystem on another computer, it works properly. disk: SAMSUNG HD161HJ (SATA) syslog: Apr 25 00:28:25 vare6gin kernel: [ 885.773839] ata3.00: exception Emask 0x1 SAct 0x1e SErr 0x0 action 0x6 frozen Apr 25 00:28:25 vare6gin kernel: [ 885.773845] ata3.00: Ata error. fis:0x21 Apr 25 00:28:25 vare6gin kernel: [ 885.773861] ata3.00: cmd 60/08:08:3f:00:ad/00:00:10:00:00/40 tag 1 ncq 4096 in Apr 25 00:28:25 vare6gin kernel: [ 885.773864] res 51/40:24:67:c8:91/40:00:05:00:00/40 Emask 0x9 (media error) Apr 25 00:28:25 vare6gin kernel: [ 885.773871] ata3.00: status: { DRDY ERR } Apr 25 00:28:25 vare6gin kernel: [ 885.773877] ata3.00: error: { UNC } [...snip 3 similar repeats of last 4 lines; see revision history for full log...] Apr 25 00:28:25 vare6gin kernel: [ 885.773970] ata3: hard resetting link Apr 25 00:28:25 vare6gin kernel: [ 885.773974] ata3: nv: skipping hardreset on occupied port Apr 25 00:28:25 vare6gin kernel: [ 886.240073] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300) Apr 25 00:28:25 vare6gin kernel: [ 886.256277] ata3.00: configured for UDMA/133 Apr 25 00:28:25 vare6gin kernel: [ 886.256305] ata3: EH complete Apr 25 00:28:27 vare6gin kernel: [ 888.176088] ata3: EH in SWNCQ mode,QC:qc_active 0xF sactive 0xF Apr 25 00:28:27 vare6gin kernel: [ 888.176099] ata3: SWNCQ:qc_active 0xF defer_bits 0x0 last_issue_tag 0x3 Apr 25 00:28:27 vare6gin kernel: [ 888.176102] dhfis 0xF dmafis 0x1 sdbfis 0x0 Apr 25 00:28:27 vare6gin kernel: [ 888.176109] ata3: ATA_REG 0x51 ERR_REG 0x40 Apr 25 00:28:27 vare6gin kernel: [ 888.176113] ata3: tag : dhfis dmafis sdbfis sacitve Apr 25 00:28:27 vare6gin kernel: [ 888.176120] ata3: tag 0x0: 1 1 0 1 Apr 25 00:28:27 vare6gin kernel: [ 888.176126] ata3: tag 0x1: 1 0 0 1 Apr 25 00:28:27 vare6gin kernel: [ 888.176131] ata3: tag 0x2: 1 0 0 1 Apr 25 00:28:27 vare6gin kernel: [ 888.176136] ata3: tag 0x3: 1 0 0 1

  Read the article

• Java: very slow tomcat and too big war file

  - by NaN

  I created some sort of RESTful API backend for a mobile app. It's written completely in Java using Jersey as Framework. At the moment no database is used, it's all in the memory, but this is no problem so far (it's only for prototyping purposes). I ordered the smallest package from digital ocean and installed tomcat7. All in all tomcat works, but I have three major problems: 1) It takes a long time until tomcat deploys the app: I deploy it per tomcat manager and it takes about 2 minutes unit the site works (excl. war upload time). 2) The war files are quite big (16MB): I don't know why they are so big. There are no database dependencies and most logic is written in plain java. Okay, we are using jersey, but 16MB are a lot for the logic of a small webservice. 3) I have to restart tomcat all 3 days or so. It looks like a memory leak or something similar. If the app runs for a few days the response time is quite high and the server seems to be frozen. It works again, if I restart tomcat per ssh. You can find my mvn pom file right here. Do you have some tips? Are there good tomcat alternatives?

  Read the article

• HTC Diamond Touch sync problem

  - by Anders

  I have a HTC Diamond Touch with all my contacts etc. on it. Did however not use it for 6mo while being abroad. When I start the phone now I realize that the touch screen has stopped working. I have tried restarting, soft resetting, shutting it off etc but the touch just wont follow commands. However, I can manage the phone by buttons so it's not frozen. Hence I can get into the phone and watch contacts but not use it to call etc. The problem is, how do I get my 300 contacts out of the thing!? When I'm plugging in the phone, it lets me choose between "Sync with Outlook" and "Use as storage device". It automatically selects "Use as storage device". Now, I cannot choose to sync it with the buttons. I can not change this option afterwards either. In short, I have a phone with all of my contact data and am completely unable to get that out of it. Any tips/help/suggestions? If possible, preferably one that does not including sending the phone to a hardware workshop for three weeks in order to get it fixed:)

  Read the article

• What is going on when I can't access an SMB server share (not accessible error) until I run cmdkey to delete the credential?

  - by Warren P

  I have a network connection share issue. The first connection works, and seems to stay connected for at least a few hours. However, after each time my windows 7 PC reboots, it can no longer form a network connection to the shared folder, nor browse to it, until I not only unmap and remap the mapped drive, but also, I have to use cmdkey to delete the stored credentials like this: cmdkey /delete:Domain:target=HOSTNAME My work PC is on a domain, and I am not the IT administrator, but I'm curious if there is anything I can do to investigate this issue. Any settings in registry or group policy that I could examine to see why the first connection works, but each subsequent attempt (once a stored credential exists) to browse or use the connection, fails with a connection error saying it is "not accessible", like this: I do not even get any error until at least several minutes go by. THe first thing I see is a window frozen and empty, and then I get this error: This has happened when connecting to a share on a DROBO device, and on a share which is not on the domain, but which was a Microsoft Home Server. I wonder if there's something broken in WIndows 7 professional with regards to connecting to non-domain shares when an active directory domain controller exists, and a particular workstation is joined to a domain? The problem only occurs if I click "remember credentials". It is not fixed by any amount of working with net use. Usingcmdkey to delete all stored credentials for the host is the only way to get back in, and it affects all non-domain shared folders. Update I'm hoping there are some registry locations I could check that could be misconfigured in some way that might explain why SMB/CIFS stored credentials for non-domain systems seem to be auto-invalidated in this weird way. Knowing how whacko Microsoft Windows domain and security handling is sometimes, this could be some kind of stupid "feature".

  Read the article

• How can I setup BluePill to Monitor a Rails App Running via Passenger (mod_rails)

  - by Jim Jeffers

  I recently launched a site running phusion passenger. Unfortunately, the site went down due to a frozen thread. I was able to save the server by doing kill -9 to the specific PID. Still though, I thought passenger was able to manage this automatically. I have a server with 1GB of memory running one rails app with passenger allotted up to 7 instances. However, when I came to discover the site went down I found that passenger had spawned 6 instances with one of them using up over 800mb of memory causing the server to swap. As a result I am hoping to setup something like bluepill on the server but I'm slightly confused as to how you go about doing it. Mainly because bluepill expects to start/stop the processes it's monitoring. However, in our case, passenger already restarts processes for us so we only need to monitor the pids of passengers instances and kill them once they've gotten too large. Has anyone here setup BluePill to monitor a rails app running under phusion's passenger? Any insight would be useful.

  Read the article

• Linux: CIFS/Samba mount hangs for several minutes

  - by Pistos

  I have a small local network which has a Gentoo box and a Windows box. I mount a share originating on the Windows box onto the Gentoo box with a command like: mount -t cifs -o username=WindowsUsername,password=thepassword,uid=pistos //192.168.0.103/Users /mnt/windowsbox Most of the time, everything Just Works, and I can read and write without problems. However, every few weeks or so, the connection or the mount point seems to go dead or hang, such that any process that tries to access the mount point gets stuck in D state (disk, or I/O wait). These processes become impervious to TERM and KILL signals. Disconnecting and reconnecting the Windows box from the network does not help. The frozen state lasts for 5+ minutes. It's really frustrating and gets in the way of normal work, because it freezes Save As dialogues, ls commands, etc. If I issue a umount on the mount point, it either hangs also, or reports that the mount point is in use. Eventually, the dead state resolves itself, and the mount point gets unmounted, or it becomes possible to umount with no delay. My guess is that this happens when the connection/mount has gone idle, or when the Windows machine has been idle. I am not really sure. Why is this happening, and what can I do to prevent it? Or how can I successfully kill these D-state processes at will? Possibly related: CIFS mounts hang on read

  Read the article

• Ubuntu 12.04 Very slow especially with Android Studio

  - by Nada

  I have an old laptop with the following specification: Memory: 485 MiB, Processor: Genuine intel CPU T2300 @ 1.66 GHz ×2, OS Type: 32 bit, Disk: 78.1 GB, I installed on it Ubuntu 12.04 LTS and I noticed that the overall system is very slow in responding. I tried to search about that in the internet and I found some articles talking about how to make Ubuntu 12.04 LTS run fast I applied all what they said including download LXDE desktop environment and then nothing different in the system response time. Then I need to develop some android applications so, I download Android Studio (Beta) 0.8.6. The problem became worse than before whenever I tried to open the Android Studio the screen is frozen for some minutes then it took time to download the projects and initialize the work space also, when I tried to move the cursor he is move very slowly. When I tried to run my first application on the AVD it took three hours and still not run yet. I delete the Android Studio and install it again several times, I was trying to solve the problem but still nothing change. Please if you have any suggestions that may help me make my laptop and Android Studio work faster I will appreciate it for you. Thank you in advance.

  Read the article

< Previous Page | 8 9 10 11 12 13 14 15 16  | Next Page >