Search Results

Search found 512 results on 21 pages for 'harddrive'.

Page 12/21 | < Previous Page | 8 9 10 11 12 13 14 15 16 17 18 19  | Next Page >

  • RAID1 Broken Mirroring

    - by Sanoj
    I'm having a little server with Windows Small Business Server 2003. I'm using RAID1, via a HighPoint Rocket RAID 1640 RAID-card, using two harddrives. This week the server alarmed, and durig reboot I got the error-message Broken Mirroring (User Manual page 30). I had a few alternatives (see the manual), first I tried Continue, but the server restarted during boot. Next time I took Power Off, and replaced the oldest harddrive with a new one, and when I booted, I selected Rebuild. Then I selected the new harddrive to be the new one. The rebuild-procedure started and a progress bar at 0% showed up, but after a few seconds I got the message Copy Failed!, then the server booted and Windows Server started. Now it works fine. But I guess that I'm just using one harddrive now, and it's not mirrored. I haven't touched the server since then (two days ago). What should I do now? I have no experience of this situation. Anyone that have some guidance?

    Read the article

  • My new SSD is causing issues. How can I solve them?

    - by Allan
    Computer specs 1 TB harddisc 120 GB 520intel SSD 8 GB DDR3 RAM Athlon Phenom II x64 955 3. 2ghz DK DFI Lanparty FX7900 M3H3 motherboard ASUS ATI RADEON HD6970 2 GB I have bought a new SSD (Intel 520, 120 GB), and wanted to use this as my system disc. I removed the other harddisc, and installed the SSD with the newest firmware. And then Windows 7 I updated Windows 7 with no problems and then put back my old harddrive. I formatted that old harddrive just to clean up at the same time... So at this stage everything was perfect. My new SSD was set as Master 0 Primary it boots on it and I have 1 TB emptyu harddrive I can use for whatever I want. So far no errors at all Now here is the problem, I installed a few games and everytime I tried to play the computer would say Windows must restart because DCOM server process launcher service terminated, or it says Windows must now restart because the Plug and Play service terminated unexpectedly Most commonly this error is caused by a rootkit virus, well I have tried formatting my entire computer, and running every antivirus I could find, so that shouldn't be it. I've also read somewhere it might happen when there are hardware issues. That on the otherhand would make sense, as I just put in a new SSD. I don't expect you to know this error. I haven't found anyone who knew it yet. maybe you can me guide through what might have gone wrong when I placed in the SSD? What have I checked regarding the SSD? It displays the right name when the computer starts up It has the newest firmware Did a 'sfc /scannow' which told me everything was fine I don't know what to do from here. Everything seems to work great with the drive. when I start playing games my computer crashes.

    Read the article

  • Can't do anything with Ext. HDD, ".Trashes" is probably the boogyman. (On a MAC!)

    - by Sander Schaeffer
    I bought a external Harddrive today, A Samsung. But I'm not able to do anything with it A few notes on that. I can't put anything on the harddrive. It keeps on 'preparing copying files' I can delete anything on the harddrive system files, except the folder ".Trashes". It gives error 'Unexpected error: -50' I've tried to empty my own trashcan, no changes. I've set the file permission on the .Trashes to read/write everyone, doesn;t change a thing Trying to format the whole drive with DiskUtility, but quits at start, because the drive cannot be deactivated I've tried a few terminal commands sudo -s -r rf /Volumes/Untitled\ 1/.Trashes - Directory not empty -r rf /Volumes/Untitled\ 1/.Trashes - no permissions Also cd /Volumes ls -al cd name_of_partition ls -al -rm -rf .Trashes Again: Permission error. Also: I can't change drive permissions via Disk Utility, via the button 'recover drive permissions', because it is 'blank' I really can't figure out how to delete .Trashes, format the drive or get the damn thing working. Any suggestions? p.s. If this is the wrong Stack Exchange site: Please redirect me!

    Read the article

  • Problem with Amiga 1200 accelerator board

    - by cc0
    I just recently walked past a dump, where in the corner of my eye I spotted something that looked like a huge keyboard. I went to take a closer look, and found out that it was an Amiga 1200 with a 030 accellerator board and scala dongle. Jackpot! So anyway; I dried it, cleaned it, it works, but the floppy was not powering on and same with the harddrive. I am using an old Amiga 1200 PSU that was making some strange high pitch noise when I tried to boot the amiga with the harddrive installed in it. I removed the harddrive and it booted fine with the PSU not emitting any detectable noise. However, when I have the 030 installed it sometimes reboots and shows a red "Software Error" screen. I tried removing the memory on the board, same effect. Sometimes it does not boot at all, just gives a black screen. Someone suggested the card had problems with 3.1 roms, but this amiga has only 3.0 roms installed. Does anyone have any apparent theories as to why it seems unstable? I don't have any other Amiga parts to cross-swap with to test a lot of things, so I'd really appreciate some sound input here so I'd know what to look for in order to try fix it. And merry Christmas everyone :]

    Read the article

  • MySQL select one field from table WHERE condition is in multiple rows

    - by Alex
    Tried to find the answer, but still couldn't.. The table is as follows: id, keyword, value 1 display 15.6 1 harddrive 320 1 ram 3 So what i need is something like this.. Select an id from this table where (keyword="display" and value="15.6") AND (keyword="harddrive" and value="320") There's also a possibility that there will be 3 or 4 such keyword conditions which should result into returning one id (one row) It seems there's something to deal with UNION but i didn't use it before so i can't figure it out Thanks in advance

    Read the article

  • Why can I query with an int but not a string here? PHP MySQL Datatypes

    - by CT
    I am working on an Asset Database problem. I receive $id from $_GET["id"]; I then query the database and display the results. This works if my id is an integer like "93650" but if it has other characters like "wci1001", it displays this MySQL error: Unknown column 'text' in 'where clause' All fields in tables are of type: VARCHAR(50) What would I need to do to be able to use this query to search by id that includes other characters? Thank you. <?php <?php /* * ASSET DB FUNCTIONS SCRIPT * */ # connect to database function ConnectDB(){ mysql_connect("localhost", "asset_db", "asset_db") or die(mysql_error()); mysql_select_db("asset_db") or die(mysql_error()); } # find asset type returns $type function GetAssetType($id){ $sql = "SELECT asset.type From asset WHERE asset.id = $id"; $result = mysql_query($sql) or die(mysql_error()); $row = mysql_fetch_assoc($result); $type = $row['type']; return $type; } # query server returns $result (sql query array) function QueryServer($id){ $sql = " SELECT asset.id ,asset.company ,asset.location ,asset.purchaseDate ,asset.purchaseOrder ,asset.value ,asset.type ,asset.notes ,server.manufacturer ,server.model ,server.serialNumber ,server.esc ,server.warranty ,server.user ,server.prevUser ,server.cpu ,server.memory ,server.hardDrive FROM asset LEFT JOIN server ON server.id = asset.id WHERE asset.id = $id "; $result = mysql_query($sql); return $result; } # get server data returns $serverArray function GetServerData($result){ while($row = mysql_fetch_assoc($result)) { $id = $row['id']; $company = $row['company']; $location = $row['location']; $purchaseDate = $row['purchaseDate']; $purchaseOrder = $row['purchaseOrder']; $value = $row['value']; $type = $row['type']; $notes = $row['notes']; $manufacturer = $row['manufacturer']; $model = $row['model']; $serialNumber = $row['serialNumber']; $esc = $row['esc']; $warranty = $row['warranty']; $user = $row['user']; $prevUser = $row['prevUser']; $cpu = $row['cpu']; $memory = $row['memory']; $hardDrive = $row['hardDrive']; $serverArray = array($id, $company, $location, $purchaseDate, $purchaseOrder, $value, $type, $notes, $manufacturer, $model, $serialNumber, $esc, $warranty, $user, $prevUser, $cpu, $memory, $hardDrive); } return $serverArray; } # print server table function PrintServerTable($serverArray){ $id = $serverArray[0]; $company = $serverArray[1]; $location = $serverArray[2]; $purchaseDate = $serverArray[3]; $purchaseOrder = $serverArray[4]; $value = $serverArray[5]; $type = $serverArray[6]; $notes = $serverArray[7]; $manufacturer = $serverArray[8]; $model = $serverArray[9]; $serialNumber = $serverArray[10]; $esc = $serverArray[11]; $warranty = $serverArray[12]; $user = $serverArray[13]; $prevUser = $serverArray[14]; $cpu = $serverArray[15]; $memory = $serverArray[16]; $hardDrive = $serverArray[17]; echo "<table width=\"100%\" border=\"0\"><tr><td style=\"vertical-align:top\"><table width=\"100%\" border=\"0\"><tr><td colspan=\"2\"><h2>General Info</h2></td></tr><tr id=\"hightlight\"><td>Asset ID:</td><td>"; echo $id; echo "</td></tr><tr><td>Company:</td><td>"; echo $company; echo "</td></tr><tr id=\"hightlight\"><td>Location:</td><td>"; echo $location; echo "</td></tr><tr><td>Purchase Date:</td><td>"; echo $purchaseDate; echo "</td></tr><tr id=\"hightlight\"><td>Purchase Order #:</td><td>"; echo $purchaseOrder; echo "</td></tr><tr><td>Value:</td><td>"; echo $value; echo "</td></tr><tr id=\"hightlight\"><td>Type:</td><td>"; echo $type; echo "</td></tr><tr><td>Notes:</td><td>"; echo $notes; echo "</td></tr></table></td><td style=\"vertical-align:top\"><table width=\"100%\" border=\"0\"><tr><td colspan=\"2\"><h2>Server Info</h2></td></tr><tr id=\"hightlight\"><td>Manufacturer:</td><td>"; echo $manufacturer; echo "</td></tr><tr><td>Model:</td><td>"; echo $model; echo "</td></tr><tr id=\"hightlight\"><td>Serial Number:</td><td>"; echo $serialNumber; echo "</td></tr><tr><td>ESC:</td><td>"; echo $esc; echo "</td></tr><tr id=\"hightlight\"><td>Warranty:</td><td>"; echo $warranty; echo "</td></tr><tr><td colspan=\"2\">&nbsp;</td></tr><tr><td colspan=\"2\"><h2>User Info</h2></td></tr><tr id=\"hightlight\"><td>User:</td><td>"; echo $user; echo "</td></tr><tr><td>Previous User:</td><td>"; echo $prevUser; echo "</td></tr></table></td><td style=\"vertical-align:top\"><table width=\"100%\" border=\"0\"><tr><td colspan=\"2\"><h2>Specs</h2></td></tr><tr id=\"hightlight\"><td>CPU:</td><td>"; echo $cpu; echo "</td></tr><tr><td>Memory:</td><td>"; echo $memory; echo "</td></tr><tr id=\"hightlight\"><td>Hard Drive:</td><td>"; echo $hardDrive; echo "</td></tr><tr><td colspan=\"2\">&nbsp;</td></tr><tr><td colspan=\"2\">&nbsp;</td></tr><tr><td colspan=\"2\"><h2>Options</h2></td></tr><tr><td colspan=\"2\"><a href=\"#\">Edit Asset</a></td></tr><tr><td colspan=\"2\"><a href=\"#\">Delete Asset</a></td></tr></table></td></tr></table>"; } ?> __ /* * View Asset * */ # include functions script include "functions.php"; $id = $_GET["id"]; if (empty($id)):$id="000"; endif; ConnectDB(); $type = GetAssetType($id); ?> <!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.1//EN" "http://www.w3.org/TR/xhtml11/DTD/xhtml11.dtd"> <html xmlns="http://www.w3.org/1999/xhtml"> <head> <meta http-equiv="Content-Type" content="text/html; charset=utf-8" /> <link rel="stylesheet" type="text/css" href="style.css" /> <title>Wagman IT Asset</title> </head> <body> <div id="page"> <div id="header"> <img src="images/logo.png" /> </div> </div> <div id="content"> <div id="container"> <div id="main"> <div id="menu"> <ul> <table width="100%" border="0"> <tr> <td width="15%"></td> <td width="30%%"><li><a href="index.php">Search Assets</a></li></td> <td width="30%"><li><a href="addAsset.php">Add Asset</a></li></td> <td width="25%"></td> </tr> </table> </ul> </div> <div id="text"> <ul> <li> <h1>View Asset</h1> </li> </ul> <?php if (empty($type)):echo "<ul><li><h2>Asset ID does not match any database entries.</h2></li></ul>"; else: switch ($type){ case "Server": $result = QueryServer($id); $ServerArray = GetServerData($result); PrintServerTable($ServerArray); break; case "Desktop"; break; case "Laptop"; break; } endif; ?> </div> </div> </div> <div class="clear"></div> <div id="footer" align="center"> <p>&nbsp;</p> </div> </div> <div id="tagline"> Wagman Construction - Bridging Generations since 1902 </div> </body> </html>

    Read the article

  • USB resets with Ubuntu 9.10

    - by Grumbel
    Since the upgrade to Ubuntu 9.10 I have issues with getting USB device resets on my Maxtor OneTouch USB harddrive: Nov 9 20:54:37 localhost kernel: [32459.100021] usb 2-2: reset high speed USB device using ehci_hcd and address 4 Nov 9 21:54:37 localhost kernel: [36059.100017] usb 2-2: reset high speed USB device using ehci_hcd and address 4 Nov 9 23:24:37 localhost kernel: [41459.112025] usb 2-2: reset high speed USB device using ehci_hcd and address 4 The device itself continues to work fine, the resets however wake the device out of its sleep state and thus cause it to spin up, which is very annoying. Interestingly, as the log shows, the resets happen at pretty regular intervals (i.e. one hour or half an hour), not randomly. An USB card reader seems to have the same issues, while another USB harddrive from a different manufactor works fine on the same PC. What could be causing this and how could I fix it?

    Read the article

  • Grub loading. The symbol ' ' not found. Aborted. Press any key...

    - by John
    Hi there, I have a dual boot system on dell xps 9000 with windows 7 and ubuntu. But after I performed system backup on it as requested by windows 7 I am no longer able to boot into the computer, instead at the beginning after bios I get the following message: Grub loading. The symbol ' ' not found. Aborted. Press any key... I tried to change bios booting config to starting with harddrive and it still returned the same message. Using windows boot disk only asks me to do another system backup or threatens to delete my harddrive completely. The only solution I have so far is to reinstall ubuntu, but that leaves 2 additional copies of ubuntu on my computer. Is there a simpler way to fix the situation so I can actually boot into windows? Thanks so much.

    Read the article

  • Can't initialize drive in Windows 7

    - by Abe
    I have a 2.5" laptop harddrive that I plugged into my laptop through a SATA to USB cable. It's powered by an adapter to a normal wall-plug. I want to use it as an external harddrive. It wouldn't initialize (Device is not ready), so as suggested in some instructions I found I uninstalled the drivers, unplugged it and plugged it back in. That worked, and I initialized the drive and formatted it. However I unplugged it after that and a few days later the same strategy does not work and I can't figure out how to use the drive. I can't initialize it and it doesn't show up in my computer.

    Read the article

  • Laptop harddisk produces clicking sound

    - by Alfred James
    This happens when I am booting up into windows, shutdown or things in which I access the harddrive excessively. It doesn't happen all the time. I have checked it with "Crystal disk Info" and it displays no problem, and shows HDD to perfectly fine. Should I be worried about my HDD? I have Hitachi HDD in laptop. Some times my harddrive temps reach upto 43C while watching movies or playing games. What are the normal temps, which are safe for HDD to operate and increase the lifetime of HDD. Thanks

    Read the article

  • Reliable Backup Solution for Linux for Complete System Restoration

    - by Chris S
    What's the best backup solution for Linux that can completely restore the entire filesystem to a blank harddrive (including partitioning) after an old harddrive dies? I'm currently running a few Ubuntu machines, some with RAID-1 and others without RAID (mostly laptops). I'd like to implement a backup solution that can take incremental snapshots of the entire filesystem, so that if I were to replace all the harddrives in a machine, I could use the backup to restore a perfect copy of the previous filesystem. Unfortunately, nearly all the backup solutions I've found seem to be glorified rsync scripts, which only backup some files, and have no easy way to restore once the entire filesystem is gone. Some of the more complicated solutions, like Bacula, might do what I need, but require a complicated server/client setup and are notoriously difficult to maintain. I've heard that Apple's TimeMachine utility has this ability, and I've had similar success taking differential disk images with Acronis True Image on Windows, but of course neither of these work on Linux. Is there anything comparable for Ubuntu?

    Read the article

  • What is the simplest and fastest way to transfer large file through a Windows network?

    - by Sake
    I have a Window Server 2000 machine running MS SQL Server that stores over 20GB of data. The database is backed-up every day to the second harddrive. I want to transfer those backup files to another computer to build another test server and for recovery practicing. (the backup never actually got restored for almost 5 years. Don't tell my boss about that!) I have trouble transfering that huge file through the network. I've tried plain network copy, apache download, and ftp. Any method I tried end up failing when the amount of data transfered reach 2GB. The last time that I successfully transfered the file, it was through a usb attached external harddrive. But I want to perform this task routinely and preferably automatically. Wonder what is the most pragmatic approach for this situation ?

    Read the article

  • What happens to a Windows Dynamic Drive

    - by GruffTech
    In my windows (Windows 7) I have two primary logical volumns, One is on a SSD harddrive for my operating system and installed software, and my other is a Dynamic volume for my stored media. (I do alot of work with HD footage) I have all my media on the original DV tapes for backup purposes, just having them all available on my harddrive at all times is a major convience for me, well worth the few hundred dollar investment those 2TB drives were. Anyway, Long story short is my windows install has become problematic and I want to reformat windows. Does this, or will this effect my dynamic drive in any way? I've got almost 3 TB of video on there and i really dont want to re-import all my DV tapes.

    Read the article

  • Routers with USB plug to connect external storage

    - by sixtyfootersdude
    I am just about to buy a new wireless router. I want to be able to hook up a harddrive to it and let the harddrive serve the entire network. I will mostly be storing media and some backups on the drive. I know I could get some kind of NAS but I would prefer to just hook up one of my many unused hard drives directly to my router. It looks like d-link has several products that do this using shareport. If you were wanting to have network storage how would you do it? With a NAS? Using a router with a USB port. Are these systems robust? What router would you buy?

    Read the article

  • NTFS write speed really slow (<15MB/s)

    - by Zulakis
    I got a new Seagate 4TB harddrive formatted with ntfs using parted /dev/sda > mklabel gpt > mkpart pri 1 -1 mkfs.ntfs /dev/sda1 When copying files or testing writespeed with dd, the max writespeed I can get is about 12MB/s. The harddrive should be capable of atleast 100MB/s. top shows high cpu usage for the mount.ntfs process. The system has a AMD dualcore. This is the output of parted /dev/sda unit s print: Model: ATA ST4000DM000-1F21 (scsi) Disk /dev/sda: 7814037168s Sector size (logical/physical): 512B/4096B Partition Table: gpt Number Start End Size File system Name Flags 1 2048s 7814035455s 7814033408s pri The used kernel is 3.5.0-23-generic. The ntfs-3g versions I tried are ntfs-3g 2012.1.15AR.1 (ubuntu 12.04 default) and the newest version ntfs-3g 2013.1.13AR.2. When formatted with ext4 I get good write speeds with about 140MB/s. How can I fix the writespeed?

    Read the article

  • Can this USB3 behaviour be anything else than a hardware failure?

    - by Jonas Wielicki
    While my motherboard is half a year old now (ASUS M5A99X EVO), I only recently made use of the USB3 boards (after purchase of USB3 external harddrive). However, I am encountering issues. I am running linux 3.6.7-4.fc16.x86_64. Initially, the harddrive worked fine with USB3 (amazing ˜160MB/s), but I had some problems after putting after putting the harddrive to sleep manually after use (backup) with hdparm -Y. After some time, the device disappears from lsusb and i see the following in dmesg: [ 1924.091107] xhci_hcd 0000:05:00.0: xHCI host not responding to stop endpoint command. [ 1924.091114] xhci_hcd 0000:05:00.0: Assuming host is dying, halting host. [ 1924.091147] xhci_hcd 0000:05:00.0: HC died; cleaning up [ 1924.091233] usb 11-1: USB disconnect, device number 2 [ 1924.091272] sd 6:0:0:0: Device offlined - not ready after error recovery Testing with my (USB3 capable) notebook, I could not immediately reproduce the behaivour. I put the drive to sleep with hdparm -Y and waited for like an hour, but it was still listed in lsusb and responded after a few seconds delay when I tried after the hour of waiting. After an hour, on the desktop, the device would've usually vanished. Googling for this issue, I came across hints that playing around with IOMMU settings and upgrading the BIOS might help. I upgraded the BIOS and tried both with and without IOMMU enabled, got similar results. Most disturbing is, that one of the two USB 3.0 hubs sometimes also disappears from lsusb (or does not show up after boot at all). I've also heard that there are some hardware issues with ASUS USB3 ports. Applying mechanic force to the capble doesn't push the issue to one side or the other. Also, udev seems to reenumerate all devices if I plug the HDD into the USB 3.0 port without success (I can notice from my keyboard layout being changed to the default, which I do not use normally). The drive is externally powered and the external power supply is plugged in (it also stays powered when unplugging from USB, although it will spin down then). So before I try to return the board, I wanted to find out whether this can be anything else than a failure on the motherboard?

    Read the article

  • What do I need to know and how do I backup a recovery partition?

    - by PeanutsMonkey
    I am in the possession of a HP laptop specifically the HP Folio Ultrabook. I need to make an image of the harddrive so that in the event it needs to be restored I can do so with the base operating system which is Windows 7 Professional as well as the HP recovery partition. I also need to backup all data that is on the laptop. Where do I start? What software can I use? Please limit these to freely available software or Linux I need to be able to backup the image to a file server and an external harddrive Is there anything else I need to do or know? The laptop is being used by a user on a domain

    Read the article

  • How to copy protected files when an Administrator in Vista (easily)

    - by earlz
    Hello, I have a harddrive I need to backup. In the harddrive is of course things like Documents and Settings which is set to not allow other people to see inside someone's personal folders. I am an administrator though and I can not figure out how to mark these files so that I am permitted to access them and copy them. IWhen I double click on My Documents then it pops up saying You must have permission to access this and gives me an option like ok or cancel. I click ok and then it says you do not have permission to access these files I'm an administrator on the system so I don't understand why Vista is locking me out. How can I setup vista so that it will let me copy every file, even ones I don't have permission to?

    Read the article

  • Windows XP computer reboots at start

    - by Jonas
    I have trouble with a Windows XP computer. After Windows is started and I can see the desktop background (sometimes I can use the system a few seconds), then the system is rebooted before I can do anything. I have used a Windows XP CD and runned chkdsk /r from the repair console. But it didn't help. I have also tried booting in "safe mode" but it didn't help. The C:\Windows\Minidump directory is empty. What can I do to solve this? UPDATE: I have now placed the harddrive in another computer and I have access to all data. Except from copying all data, is there anything I can make with the system so I can boot from the harddrive again? Is it "safe" to install windows on the same disk and directory - so I can access the data but not run the applications?

    Read the article

  • Computer not booting, black screen, no beeps

    - by Michael Gaddass
    I bought a pre-owned computer on Ebay. It booted fine, had to reset due to it not detecting USB mouse, but it detected the USB keyboard. Booted fine again, then I tried to install Ubuntu Desktop, when it was installing I got a phone call, when I'm answering it, I find a Blue screen of Death. I reboot the computer and nothing, no BIOS boot, no beeping, but one of the fans was on. I opened the cover and found a large amount of dust, removed it, still not booting. I'm a complete novice with computer repairs, the most advanced thing I did was take a 286 harddrive and replace a 486's damaged harddrive with it (put the drive into the 486 that is), what could possibly be causing this?

    Read the article

  • Sync two external harddrives?

    - by acidzombie24
    A little mishap happened earlier today and i am thinking i should have a copy of my external harddrive since 10% of it is very valuable. What is the best solution to keep two external harddrive in sync? i'll probably use one as regular and maybe use the other only to copy data. The easiest way to keep it in sync is to clear one drive and copy the other but 1T of data will take a long time. Whats a good existing app that will keep them in sync? freeware preferred.

    Read the article

  • RAID 1 in ubuntu 12.04

    - by Bavly Hanna
    Right now I have a small file server to which I have loaded ubuntu 12.04 desktop on a small 160gb harddrive. This harddrive is the primary drive from which the OS boots. I want to move all my data to my file server so it can be shared on the network (contain in 2x2TB harddrives in my desktop. The 2TB drivers are in raid 1 (hardware). I simply want to move them to the file server and set it up so that they are in software raid 1. If at all possible I'd like to be able to do this without losing any info on the drives. I've searched around and the guides i find describe raiding drives for boot driver, but these wouldn't be boot drives just regular storage drives. If someone could tell me how to perform this or point me in the right direction it would be much appreciated.

    Read the article

  • Booting Ubuntu Failure : error: attempt to read or write outside of disk 'hd0'

    - by never4getthis
    I have installed ubuntu 12.10 in a WD external harddrive (320GB). This is a complete installation, not live USB. When I plug it in my HP desktop I go to the BIOS settings and boot off the harddrive, everything work perfectly -as it should. Now this works on everysingle computer and laptop in my house (all HP) -except for ONE. My HP ProBook 4530s. When I select to boot of the USB I get the Message: error: attempt to read or write outside of disk 'hd0' Now, I have removed the hdd from my laptop and the external drive is the ONLY drive plugged in. Bellow is a picture of the screen. After the message I navigate to ls / (as shown below): After here I try to acces other folders under ls /, for example, I try to go to ls /boot to get to the grub folder. Then I get the same message as before: as shown by the image below: The only folders I can access without getting the message again are /home, /run and /usr. So how do I: Boot Ubuntu from GRUB2 (this screen) manually Set to automatically boot Ubuntu If possible an explanation for this problem Thanks!

    Read the article

  • trying to setup multiple primary partitions on ubuntu linux

    - by JohnMerlino
    I currently have ubuntu desktop installed on a harddrive. I want to partition the harddrive so that I can reserve 30 gigs for ubuntu server and 30 gigs for ubuntu desktop. The drive has 300 gigs available. Right now I am booting from dvd drive and installing ubuntu server. I selected "Guided partitioning" and created a 30 gig primary partition of Ext4 journaling filesystem, set "yes, format it" for format partition and set bootable flag to on. I intend to use this 30 gig partition to hold ubuntu server and allow me to boot from it. Now I have two other partitions. They are both set to "logical", one is currently using 285.8 gigs and is using ext4 (when I try to set bootable flag to true, it gives a warning "You are trying to set the bootable flag on a logical partition. The bootable flag is only useful on the primary partitions"). More alarming it says "No existing file system was detected in this partition". Actually, Im thinking that this is the parittion that is supposed to be holding my current Ubuntu Desktop. And of course I want this to be bootable and be a primary partition, so I could dual boot from this and the server partition. Now the third partition is also set to logical and it is being used as swap area. My question is regarding that second partition. Its supposed to be a primary partition thats holding my existing ubuntu desktop edition. How do I switch it to primary and to make sure that its pointing to my existing desktop installation?

    Read the article

< Previous Page | 8 9 10 11 12 13 14 15 16 17 18 19  | Next Page >