Search Results

Search found 19970 results on 799 pages for 'jason down'.

Page 12/799 | < Previous Page | 8 9 10 11 12 13 14 15 16 17 18 19  | Next Page >

• Unix VPS server going down at almost the same time every day

  - by ronnz

  My server load seems to be really spiking and many times the server goes down at the same time each night (Around midnight). I have about 20 cPanel accounts hosted on it and have tried everything I know to try to find what is causing the issue. Some of the things I have tried: Combined all site access logs found in /etc/httpd/domlogs and cannot see anything unusual at the time of server going down. Checked most other logs in the var/log directory and found nothing indicating the issue at the time the server is going down. Checked cron logs and cannot see anything unusual.. See below. Last night CPU spiked to 7.5 at 00:14. What else can I be checking? How can I really monitor to find out the root cause? Dec 8 00:05:01 v1 crond[6082]: (root) CMD (/usr/local/cpanel/bin/dcpumon /dev/null 2&1) Dec 8 00:05:01 v1 crond[6084]: (root) CMD (/usr/local/cpanel/whostmgr/bin/dnsqueue /dev/null 2&1) Dec 8 00:10:01 v1 crond[6435]: (root) CMD (/usr/lib64/sa/sa1 1 1) Dec 8 00:10:01 v1 crond[6436]: (root) CMD (/usr/local/cpanel/bin/dcpumon /dev/null 2&1) Dec 8 00:15:12 v1 crond[6775]: (root) CMD (/usr/local/cpanel/scripts/autorepair recoverymgmt /dev/null 2&1) Dec 8 00:15:12 v1 crond[6776]: (root) CMD (/usr/local/cpanel/scripts/recoverymgmt /dev/null 2&1) Dec 8 00:15:12 v1 crond[6777]: (root) CMD (/usr/local/cpanel/bin/dbindex /dev/null 2&1) Dec 8 00:15:12 v1 crond[6781]: (root) CMD (/usr/local/cpanel/bin/dcpumon /dev/null 2&1) Dec 8 00:20:33 v1 crond[7047]: (root) CMD (/usr/lib64/sa/sa1 1 1)

  Read the article

• Scrolling down to next element via keypress & scrollTo plugin - jQuery

  - by lyrae

  I am using jQuery's scrollTo plugin to scroll up and down my page, using UP arrow and DOWN arrow. i have a bunch of div with class "screen", as so: <div class="screen-wrapper">...</div> What I am trying to do is, when i press UP or DOWN, the window scrolls to the next, or previous div with class of "screen". I have the keypresses taken care of. According to the plugin docs, to scroll a window, you use $.scrollTo(...); Here's the code I have: $(document).keypress(function(e){ switch (e.keyCode) { case 40: // down n = $('.screen-wrapper').next() $.scrollTo( n, 800 ); break; case 38: // up break; case 37: // left break; case 39: // right break; } }); And if it helps, here's the HTML div. I have a few of these on the page, and essentially, am trying to scroll to next one by pressing down arrow: <div class='screen-wrapper'> <div class='screen'> <div class="sections"> <ul> <li><img src="images/portfolio/sushii-1.png " /></li> <li><img src="images/portfolio/sushii-2.png" /></li> <li><img src="images/portfolio/sushii-3.png" /></li> </ul> </div> <div class="next"></div> <div class="prev"></div> </div> And also if it needed, I can provide a link where this is being used if it'll help someone get a better idea. edit And, i forgot to mention what the real question here is. The question/problem is that it won't scroll down past the first element, as seth mentioned.

  Read the article

• Force spin-down of external hard-drive on linux (raspberry pi)

  - by user258346

  I'm currently setting up a home-server using a Raspberry Pi with an external hard-disk connected via usb. However, my hard-drive will never spin down when being idle. I tried already the hints provided at raspberrypi.org ... without any success. 1.) sudo hdparm -S5 /dev/sda returns /dev/sda: setting standby to 5 (25 seconds) SG_IO: bad/missing sense data, sb[]: 70 00 04 00 00 00 00 0a 00 00 00 00 44 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 2.) sudo hdparm -y /dev/sda returns /dev/sda: issuing standby command SG_IO: bad/missing sense data, sb[]: 70 00 04 00 00 00 00 0a 00 00 00 00 44 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ...and 3.) sudo sdparm --flexible --command=stop /dev/sda returns /dev/sda: HDD 1234 ... without spin-down of the drive. I use the following hardware: Inateck FDU3C-2 dual Ports USB 3.0 HDD docking station Western Digital WD10EZRX Green 1TB Is it possible, that the sent spin-down-signals are somewhere overwritten/lost/ignored?

  Read the article

• Getting 502 instead of 503 when all backend servers are down running HAProxy behind Apache

  - by scarba05

  I'm testing running HAProxy as a dedicated load balancer behind Apache 2.2, replacing our current configuration where we use Apache's load balancer. In our current, Apache only, set-up if all the backend (origin) servers are down Apache will serve a 503 service unavailable message. With HAProxy I get a 502 bad gateway response. I'm using a simple reverse proxy rewrite rule in Apache RewriteRule ^/(.*) http://127.0.0.1:8000/$1 [last,proxy] In HAProxy I have the following (running in default tcp mode) defaults log global option tcp-smart-accept timeout connect 7s timeout client 60s timeout queue 120s timeout server 60s listen my_server 127.0.0.1:8000 balance leastconn server backend1 127.0.0.1:8001 check observe layer4 maxconn 2 server backend1 127.0.0.1:8001 check observe layer4 maxconn 2 Testing connecting directly to the load balancer when the backend servers are down: [root@dev ~]# wget http://127.0.0.1:8000/ test.html --2012-05-28 11:45:28-- http://127.0.0.1:8000/ Connecting to 127.0.0.1:8000... connected. HTTP request sent, awaiting response... No data received. So presumably this is down to the fact that HAProxy accepts the connection and then closes it.

  Read the article

• USB External HDD NOT spinning down on Windows Vista / Windows 7

  - by Deepak

  I have 3 external 2.5" USB HDDs - all from different manufacturers and with different capacities. I also have access to multiple Windows Vista / Windows 7 / Windows XP computers. My problem is that with the Windows Vista and Windows 7 computers, the external USB drives DO NOT spin down when I do "Safely remove hardware". Windows will tell me that I can safely remove the device, but I can see (and feel the rotations of the disk when I touch the casing) that the disks are still spinning and NEVER spin down. They also never go into their suspended state (which is generally signaled with a slow flashing of the activity LED). However, with Windows XP, when I do "Safely remove hardware", I can see that the drives do indeed spin down without any issues and go into their respective suspended states. I notice that this behaviour is consistent across all my 3 drives and on different hardware. Has anybody else noticed the same issues? Is there any way we can have the same behaviour as Windows XP on Windows Vista and 7, because I feel on the long run, disconnecting the drives while they are still spinning will have a negative effect on their life span. Thanks, Deepak.

  Read the article

• Slide down and slide up div on click

  - by 422

  I am using the following code to open and close a div ( slide up/down ) using js I have the slide down event attached to a button and the slide up event sttached to close text. What I want is the button onclick to open and onclick again close the slide element. Here is the JS // slide down effect $(function(){ $('.grabPromo').click(function(){ var parent = $(this).parents('.promo'); $(parent).find('.slideDown').slideDown(); }); $('.closeSlide').click(function(){ var parent = $(this).parents('.promo'); $(parent).find('.slideDown').slideUp(); }); }); The HTML: <span class="grabPromo">Open</span> and in the slide down area i have <a class="closeSlide">Close</a> Any help appreciated. Ideally I want a down pointing arrow on the slide down button and a up pointing arrow to replace it to slide up on same button. And do away with the close link altogether. Any help appreciated. Cheers

  Read the article

• Sun Power Button Won't Shut Down System

  - by user36680

  Background: We are running NIS and have NFS mounts from a Solaris 10 workstation to a Solaris 8 server. If the workstation loses its network connection for some reason, when I look at the workstation's console I see repeated messages of the form: <date> <time> <hostname> ypbind[<pid>]: NIS server not responding for domain "<domain>"; still trying. If I try to login at the console as a user, it won't work because it can't authenticate my account through NIS. Also, it won't return to a login prompt again, so I can't log in as root. If I press the power button (don't hold it in) on the workstation, I see: <date> <time> <hostname> power: WARNING: Power off requested from power button or SC, powering down the system! Shutdown started. <date> <time> Changing to init state 5 - please wait. <date> <time+2 minutes> <hostname> power: WARNING: Failed to shut down the system! And continue to see messages of the form: <date> <time> <hostname> ypbind[<pid>]: NIS server not responding for domain "<domain>"; still trying. So, the questions are How do I make NIS stop trying (because I know it will fail)? Why won't it shut down?

  Read the article

• GroupWise 6.5 IMAP Service Shuts Down-Needs Constant Restarting

  - by Jeffrey Majette

  I have an issue with my aging (and soon to be replaced) GroupWise 6.5 system. The IMAP service in the GWIA tends to periodically shut down, requiring that I restart the service. When IMAP is down, my end users who use Blackberry BIS cannot send or receive email on their devices. It's a royal pain to have to restart the IMAP service several times a day. The GWIA logs do not seem to indicate a problem. I thought I was on to something yesterday. I discovered that the gwia.cfg file located in SYS:SYSTEM was actually from GW 6.0. The gwia.cfg in DOMAIN\WPGATE\GWIA was titled for GW 6.5 when opening the file for editing. I changed the generic placeholder info in the file to match my environment and restarted the gwia. However, it made no difference in performance. The IMAP service shuts down about 30 minutes after the last restart. I know this version of GW is antiquated. We are in the process of migrating to Google Apps. But, if anyone has an idea that could fix this issue, I and my end user community would be forever grateful!

  Read the article

• how to filter text of the selected value in drop down

  - by Carlos

  I have a drop down menu. Has product types. Product types have associated value (from drop down) values correspond to machine groups. So each option should have three variables--Machine name, values, machine group. I can get the Machine name and I can get the machine value (and display them in a different field)...what I have not been able to figure out is how to change the value into the Machine group. jQuery('#MachineName').bind('change', function() { //get selected value from drop down; var selectedValue = jQuery("#MachineName").val(); //populate a text field with the selected drop down value jQuery("#MachineValue").val(selectedValue); What I would like to do is keep that MachineValue but then populate another text field with the sorted MachineGroup I have been trying to run it through something like switch(jQuery(this).val()){ case "236" : newVal = "8"; break; But I don't want to "change" the value I just want to do an "if then" type filter, so maybe something like: '236' => "8", '237' => "5", I just don't know how to properly say "assign the MachineGroup based on the MachineValue" (and then have it populate a different text field) In the end I would have three fields. The drop down, the MachineValue and the MachineGroup. Drop down and value are done, I just need to do Group. (And I can sort Group based on MachineName...just not sure which would be easier)

  Read the article

• Hour-long shutdown duration "shutting down hyper-v virtual machine management service"

  - by icelava

  I have a Windows 2008 R2 server that is a Hyper-V host (Dell PowerEdge T300). Today for the first time I encountered an odd situation; i lost connection with one of the guest machines but logging on physically it seems the guest OS is still running but no longer contactable via the network. I tried to shut down the guest machine (Windows XP) but it would not shut down, getting stuck in a "Not responding" dialog box that cannot be dismissed. I used the Hyper-V management console to reset the machine and it could not get out of resetting state. I tried to save another Windows 2003 guest machine, and it would be progress with its Saving state (0%). The other running Windows 2003 guest was stuck in the logon dialog. My first suspicion is perhaps one of the Windows update patches this week (10 Nov 2011) may something to do with it, which was still pending a system restart. Well, since I could not do anything with Hyper-V i proceeded with the Windows Update restart, and now it is stuck half an hour at "Shutting down hyper-v virtual machine management service" Prior to restarting I did not observe any hard disk errors reported in the system event log; doubt it is a disk-related condition. Shall I force a hard reboot? UPDATE Ok so i left it hanging over an hour while attending to other matters, and thankfully the host cleanly restarted. I can operate the guest machines fine now. Phew. Hyper-V must have been crawling for some reason. The VMs have been observed to become slow in the past when the host has been up for a long duration (two weeks to a month), but never this slow. Would love to know what types of performance monitoring items i can observe to give a hint why this can happen. UPDATE 2012-02-13 In the months ever since, Hyper-V has stalled into this state another two times. It appears so randomly and without any error event logs to hint what is causing it enter this "drunkard" state. Just an Hyper-V management service timeout. Log Name: System Source: Service Control Manager Date: 13/2/2012 9:16:48 AM Event ID: 7043 Task Category: None Level: Error Keywords: Classic User: N/A Computer: elune Description: The Hyper-V Virtual Machine Management service did not shut down properly after receiving a preshutdown control. Event Xml: <Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event"> <System> <Provider Name="Service Control Manager" Guid="{555908d1-a6d7-4695-8e1e-26931d2012f4}" EventSourceName="Service Control Manager" /> <EventID Qualifiers="49152">7043</EventID> <Version>0</Version> <Level>2</Level> <Task>0</Task> <Opcode>0</Opcode> <Keywords>0x8080000000000000</Keywords> <TimeCreated SystemTime="2012-02-13T01:16:48.882901900Z" /> <EventRecordID>567844</EventRecordID> <Correlation /> <Execution ProcessID="764" ThreadID="8484" /> <Channel>System</Channel> <Computer>elune</Computer> <Security /> </System> <EventData> <Data Name="param1">Hyper-V Virtual Machine Management</Data> </EventData> </Event> The only means out of it is to restart the system.

  Read the article

• Disk is spinning down each minute, unable to disable it

  - by lzap

  I played with spindown and APM settings of my Samsung discs and now they spin down every minute. I want to disable it, but it seems it does not accept any of the spindown time or APM values. Nothing works, it's all the same. Please help what values should be proper for it. I do not want it to spin down at all. /dev/sda: ATA device, with non-removable media Model Number: SAMSUNG HD154UI Serial Number: S1Y6J1KZ206527 Firmware Revision: 1AG01118 Standards: Used: ATA-8-ACS revision 3b Supported: 7 6 5 4 Configuration: Logical max current cylinders 16383 16383 heads 16 16 sectors/track 63 63 -- CHS current addressable sectors: 16514064 LBA user addressable sectors: 268435455 LBA48 user addressable sectors: 2930277168 Logical/Physical Sector size: 512 bytes device size with M = 1024*1024: 1430799 MBytes device size with M = 1000*1000: 1500301 MBytes (1500 GB) cache/buffer size = unknown Capabilities: LBA, IORDY(can be disabled) Queue depth: 32 Standby timer values: spec'd by Standard, no device specific minimum R/W multiple sector transfer: Max = 16 Current = 16 Advanced power management level: 60 Recommended acoustic management value: 254, current value: 0 DMA: mdma0 mdma1 mdma2 udma0 udma1 udma2 udma3 udma4 udma5 *udma6 udma7 Cycle time: min=120ns recommended=120ns PIO: pio0 pio1 pio2 pio3 pio4 Cycle time: no flow control=120ns IORDY flow control=120ns Commands/features: Enabled Supported: * SMART feature set Security Mode feature set * Power Management feature set * Write cache * Look-ahead * Host Protected Area feature set * WRITE_BUFFER command * READ_BUFFER command * NOP cmd * DOWNLOAD_MICROCODE * Advanced Power Management feature set Power-Up In Standby feature set * SET_FEATURES required to spinup after power up SET_MAX security extension Automatic Acoustic Management feature set * 48-bit Address feature set * Device Configuration Overlay feature set * Mandatory FLUSH_CACHE * FLUSH_CACHE_EXT * SMART error logging * SMART self-test Media Card Pass-Through * General Purpose Logging feature set * 64-bit World wide name * WRITE_UNCORRECTABLE_EXT command * {READ,WRITE}_DMA_EXT_GPL commands * Segmented DOWNLOAD_MICROCODE * Gen1 signaling speed (1.5Gb/s) * Gen2 signaling speed (3.0Gb/s) * Native Command Queueing (NCQ) * Host-initiated interface power management * Phy event counters * NCQ priority information DMA Setup Auto-Activate optimization Device-initiated interface power management * Software settings preservation * SMART Command Transport (SCT) feature set * SCT Long Sector Access (AC1) * SCT LBA Segment Access (AC2) * SCT Error Recovery Control (AC3) * SCT Features Control (AC4) * SCT Data Tables (AC5) Security: Master password revision code = 65534 supported not enabled not locked frozen not expired: security count supported: enhanced erase 326min for SECURITY ERASE UNIT. 326min for ENHANCED SECURITY ERASE UNIT. Logical Unit WWN Device Identifier: 50024e900300cca3 NAA : 5 IEEE OUI : 0024e9 Unique ID : 00300cca3 Checksum: correct I have the very same disc which I did not "tuned" and it does not spin. But I do not know where to read the settings from. The hdparm only shows this: Advanced power management level: 60 Recommended acoustic management value: 254, current value: 0 Edit: It seems the issue was tuned daemon in RHEL6. It was too aggressive, I turned off disc tuning and it seems they are no longer spinning down.

  Read the article

• Server 2008 print server down / access denied

  - by johnnyb10

  I have two Server 2008 servers (both running as VMs in VMware). One is a Full Installation, and the other is a Server Core installation. I just installed Print Services on both of them. In Print Management on the Full server, I added the Server Core print server (so now two print servers are listed in Print Management). However, the icon for my Server Core print server has a red, down-pointing arrow (indicating that it is down, I suppose). And when I right-click it and click Add Printer, I get a message saying that access is denied. Can someone tell me how to bring up or check on the status of the Server Core print server. Obviously, I'm somewhat of a noob with this stuff. Thanks in advance...

  Read the article

• Automatically repair network connection when it goes down.

  - by Spines

  Every hour or so my wireless router goes down, and everyone connected loses internet for a couple minutes. If I right click on my network connection and choose repair, I usually get internet back quicker. Is there a way I can automatically have it try to repair the connection once it goes down? Can I write a program to do this if there isn't a built in windows setting? BTW I'm using Windows XP. EDIT:My router is a Linksys WRT110 with Firmware Version: 1.0.04, and I have cable internet. The signal is 100%. I live in an apartment complex and there are about 15 other wifi networks visible to me, not sure if that has any effect.

  Read the article

• Macbook shuts down when battery is empty (should have went to sleep)

  - by the_great_monkey

  In the past few weeks, my macbook shuts down when the battery dies. The battery does not even die at 0%, sometimes it shuts down at 5% or 10% remaining. I tried calibrating the baterry following this website: http://support.apple.com/kb/HT1490. But it does not really help. I regularly use battery in my macbook, I'd say I use around 2-3 cycles a week. My charge cycles is 440 cycles, and my current battery capacity is 3400mAh from the original 4100mAh. I have 2008 unibody Macbook. Does anyone know how to make it goes to sleep before the battery's dead? EDIT: The OS seems the think that the battery is ok...

  Read the article

• Can't Shut Down computer with windows 8 Release Preview

  - by Bram Winda

  I downloaded Release Preview and installed it. I have a problem when I shut down the computer. After I press windows key + I Power Shut Down, a box pops up titled "Winlogon.exe - No Disk. Then under that is the message "There is no disk in the drive. Please insert a disk into Drive G". After hitting the retry button a couple of different times the screen finally goes dark. When I was going to turn it back on, I noticed the Power Button was still list. The only way to do a complete Shutdown is to hold in the power button directly. How do I fix this problem?

  Read the article

• D-Link DIR-300 slows down / loses network

  - by basic6

  Hi there, there are 2 buildings (A and B). In bldg A is an open WLAN (which I'm allowed to use btw). In bldg B is a computer that I want to connect to that network. So I flashed an old D-Link DIR-300 AP with DD-WRT, mounted it to the wall (bldg B) near a window, attached a 13 dBi directional antenna (pointing to bldg A) and configured it as AP client in that wireless network. Then there's another AP, connected to the D-Link AP, acting as standard access point, which the computer is connected to. That's basically working so far, but: Every now and then the connection is lost. Not the connection between the computer and the D-Link (I can access the DD-WRT admin page normally) or the connection between the D-Link and the WLAN (in Status - Wireless it says it's still connected to the network), but when I want to access a web page (which only works if I'm connected to the wireless network from bldg A), my Firefox keeps "Looking for" (name resolution) without finding anything. When I reset the D-Link (power off, power on) in this situation, after some moments, everything's working fine again (Internet access). I've no idea why this is happening, but usually it's at most every few weeks (most times when nobody was using the computer, so no traffic). Compared to the connection speed when I connect directly to the WLAN in bldg A (Laptop), the speed in bldg B is rather slow, but I have the impression that this difference is worse in the last few days. A few minutes ago, I got 582 KB/s down and 911 KB/s up in bldg A (directly/laptop) and 84 KB/s down and 9 KB/s up in bldg B. The speed in bldg B used to be way higher (I remember 200 KB/s up) while the actual network speed in bldg A was lower than it is now (close to those 200). I'm aware that the wireless connection between those buildings should slow things down, but I'm wondering why this difference has become that extreme. Thanks for any tips... Update: I currently want to upload a large file (1.5 GB) via FTP (FileZilla). Since that caused the D-Link to disconnect (as described in first post), I took my laptop to bldg A, connected directly to the original WLAN (bypassing my D-Link) and tried the same upload. Guess what - same issue: At some point the connection is dead (at this point I would have reset my D-Link if I was connected to it). Just as the D-Link, my laptop is still connected, but not even name resolution is working ("Looking for..." in Firefox). After reconnecting, it's working again. Maybe my D-Link isn't the problem at all...

  Read the article

• Postfix SMTP server down on Ubuntu

  - by Paddington

  I have a Plesk server running Postfix on Ubuntu 10.04 and the SMTP service on port 25 is down. When I stop and then start postfix the server comes up only for a minute and goes down again. I have checked the load on the server and it is low as shown: *top - 04:29:33 up 19 days, 3:25, 4 users, load average: 1.47, 1.78, 2.34 Tasks: 936 total, 1 running, 935 sleeping, 0 stopped, 0 zombie Cpu(s): 0.7%us, 0.3%sy, 0.0%ni, 86.6%id, 11.7%wa, 0.6%hi, 0.1%si, 0.0%st Mem: 6110496k total, 6072988k used, 37508k free, 251244k buffers Swap: 12000544k total, 95264k used, 11905280k free, 4370432k cached* IMAP clients are not experiencing a problem and there are no issues with receiving emails for both POP or IMAP. Only SMTP (port 25) is a problem. If I ask clients to use the submission port (587) messages are delivered. netstat -lnt shows the following results , so its not a port issue. tcp 0 0 0.0.0.0:25 0.0.0.0: LISTEN tcp 0 0 0.0.0.0:8443 0.0.0.0:* LISTEN*

  Read the article

• XFS and loss of data when power goes down

  - by culebrón

  Each time electricity goes down, my desktop (without UPS) loses some temporary information. Opera can lose settings, history, cache, or mail accounts (Thanks heavens I was wise to use IMAP). Partially or all together. a whole file (complete and save) in Geany appeared empty (and I didn't commit it to Git) rhythmbox lost all podcasts subscription data I'm afraid there are other losses I just didn't see. What's the reason? A memory files cache, a mem-disk? Or non-atomic file writes in xfs? I have Ubuntu 9.10 and XFS on both / and /home partitions. Is ext4 safer in such circumstances? I've seen ext3 is faster. Is it as safe as *4? Given that the apartment I rent is connected to a common bus and 1 safety switch for several apartments, and the neighbors - alone or together - overload it at least once every week, the lights go down often enough for this to be an issue.

  Read the article

• Debian Lenny - network interfaces(eth) are in DOWN state

  - by pachanga

  Folks, I'm facing a very weird problem with one of my production servers(it's Debian Lenny) - after reboot network interfaces(eth0,eth1) are in DOWN state. Looks like an Intel based networking adapter is installed on the server, lspci lists it as follows: Ethernet controller: Intel Corporation Device 10c9 (rev 01) The kernel driver responsible for this adapter is "igb". I tried "modprobe -r igb && modprobe igb", network interfaces first disappear then appear, but they are in DOWN state again. What could go wrong? It used to be working just fine. How can this be fixed?

  Read the article

• My Intel Core i3 frequently shuts down due to "Processor Thermal Trip error"

  - by explorest

  My Desktop PC running Windows 7 on Intel Core i3 dual processor machine started shutting down during the boot process a couple of days ago. I left it alone for about 48 hours and tried again. The boot process informed me about Processor Thermal Trip as being the cause of boot failures and suggested a Windows recovery process. I went through the recovery process which completed without problems. The PC booted normally and Windows 7 worked as expected but after 10 minutes it again tripped and now whenever I start it, it shuts down during the boot process. What should I do next?... is there a boot menu / setup settings that needs to be adjusted to avoid it... Or is there a hardware problem (which seems unlikely as the machine occasionally boots perfectly )?

  Read the article

• Slowing down cpu speed

  - by New linux user

  How to slow down my laptop cpu so that it does not overheat?

  Read the article

• Debian 5 server is randomly shutting down.

  - by revofreak

  My debian 5 vps is suffering from random shutdowns. I reinstalled it several times, the hosts moved me to a different physical box, check the install image and said everyone else also uses it and is fine. Heres the output from syslog Mar 27 00:19:19 noobintraining-1 -- MARK -- Mar 27 00:32:01 noobintraining-1 shutdown[18142]: shutting down for system halt Mar 27 00:32:06 noobintraining-1 init: Switching to runlevel: 0 Mar 27 00:32:06 noobintraining-1 xinetd[15907]: Exiting... Mar 27 00:32:07 noobintraining-1 named[15865]: received control channel command 'stop -p' Mar 27 00:32:07 noobintraining-1 named[15865]: shutting down: flushing changes Mar 27 00:32:07 noobintraining-1 named[15865]: stopping command channel on 127.0.0.1#953 Mar 27 00:32:07 noobintraining-1 named[15865]: stopping command channel on ::1#953 Mar 27 00:32:07 noobintraining-1 named[15865]: no longer listening on ::#53 Mar 27 00:32:07 noobintraining-1 named[15865]: no longer listening on 127.0.0.1#53 Mar 27 00:32:07 noobintraining-1 named[15865]: no longer listening on 89.238.172.132#53 Mar 27 00:32:07 noobintraining-1 named[15865]: exiting Mar 27 00:32:07 noobintraining-1 exiting on signal 15 Any help is most appreciated!

  Read the article

• Simple monitoring utility with up/down statuses of the host's network connectivity and services

  - by Beaming Mel-Bin

  We've looked at many monitoring tools (SolarWinds, Zabbix, Nagios) through out the last 10 years but they never took hold because they are overly complicated. I am willing to try them again or something new at this point but with a much simpler goal: ping to check up and down of host tcp probes to test up and down of service notifications via e-mail web GUI prefer an OSS solution Wanted to know if someone has any recommendations on this. This could be a Windows or Linux application. Preferably without the reqirement of agents. I don't even need SNMP support but that may be nice for expanding once we have the above mentioned bare minimum in place.

  Read the article

• Correct way of bringing network interface down in linux

  - by Karolis T.

  For example: $ ifconfig dummy0 up $ ifconfig dummy0 "192.168.1.190 netmask 255.255.255.0" Calling ifconfig with no parameters shows the interface dummy0 Link encap:Ethernet HWaddr b6:1f:f3:92:6d:20 inet addr:192.168.1.190 Bcast:192.168.1.255 Mask:255.255.255.0 inet6 addr: fe80::b41f:f3ff:fe92:6d20/64 Scope:Link UP BROADCAST RUNNING NOARP MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:15 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:0 (0.0 B) TX bytes:1050 (1.0 KiB) How can I bring the interface down so that it doesn't show up in ifconfig ifconfig -a ifconfig dummy0 without rmmod dummy because dummy is used just for example purposes. If there is no way to do that, what "throw-away" IP could I set to it and be safe from any trouble? like $ ifconfig dummy0 down $ ifconfig dummy0 0.0.0.0

  Read the article

• Debian 5 is randomly shutting down.

  - by revofreak

  My debian 5 vps is suffering from random shutdowns. I reinstalled it several times, the hosts moved me to a different physical box, check the install image and said everyone else also uses it and is fine. Heres the output from syslog Mar 27 00:19:19 noobintraining-1 -- MARK -- Mar 27 00:32:01 noobintraining-1 shutdown[18142]: shutting down for system halt Mar 27 00:32:06 noobintraining-1 init: Switching to runlevel: 0 Mar 27 00:32:06 noobintraining-1 xinetd[15907]: Exiting... Mar 27 00:32:07 noobintraining-1 named[15865]: received control channel command 'stop -p' Mar 27 00:32:07 noobintraining-1 named[15865]: shutting down: flushing changes Mar 27 00:32:07 noobintraining-1 named[15865]: stopping command channel on 127.0.0.1#953 Mar 27 00:32:07 noobintraining-1 named[15865]: stopping command channel on ::1#953 Mar 27 00:32:07 noobintraining-1 named[15865]: no longer listening on ::#53 Mar 27 00:32:07 noobintraining-1 named[15865]: no longer listening on 127.0.0.1#53 Mar 27 00:32:07 noobintraining-1 named[15865]: no longer listening on 89.238.172.132#53 Mar 27 00:32:07 noobintraining-1 named[15865]: exiting Mar 27 00:32:07 noobintraining-1 exiting on signal 15 Any help is most appreciated!

  Read the article

< Previous Page | 8 9 10 11 12 13 14 15 16 17 18 19  | Next Page >