Search Results

Search found 3645 results on 146 pages for 'jesus 21'.

Page 12/146 | < Previous Page | 8 9 10 11 12 13 14 15 16 17 18 19  | Next Page >

• Pfsense 2.1 OpenVPN can't reach servers on the LAN

  - by Lucas Kauffman

  I have a small network set up like this: I have a Pfsense for connecting my servers to the WAN, they are using NAT from the LAN - WAN. I have an OpenVPN server using TAP to allow remote workers to be put on the same LAN network as the servers. They connect through the WAN IP to the OVPN interface. The LAN interface also servers as the gateway for the servers to get internet connection and has an IP of 10.25.255.254 The OVPN Interface and the LAN interface are bridged in BR0 Server A has an IP of 10.25.255.1 and is able to connect the internet Client A is connecting through the VPN and is assigned an IP address on its TAP interface of 10.25.24.1 (I reserved a /24 within the 10.25.0.0/16 for VPN clients) Firewall currently allows any-any connection OVPN towards LAN and vice versa Currently when I connect, all routes seem fine on the client side: Destination Gateway Genmask Flags Metric Ref Use Iface 300.300.300.300 0.0.0.0 255.255.255.0 U 0 0 0 eth0 10.25.0.0 10.25.255.254 255.255.0.0 UG 0 0 0 tap0 10.25.0.0 0.0.0.0 255.255.0.0 U 0 0 0 tap0 0.0.0.0 300.300.300.300 0.0.0.0 UG 0 0 0 eth0 I can ping the LAN interface: root@server:# ping 10.25.255.254 PING 10.25.255.254 (10.25.255.254) 56(84) bytes of data. 64 bytes from 10.25.255.254: icmp_req=1 ttl=64 time=7.65 ms 64 bytes from 10.25.255.254: icmp_req=2 ttl=64 time=7.49 ms 64 bytes from 10.25.255.254: icmp_req=3 ttl=64 time=7.69 ms 64 bytes from 10.25.255.254: icmp_req=4 ttl=64 time=7.31 ms 64 bytes from 10.25.255.254: icmp_req=5 ttl=64 time=7.52 ms 64 bytes from 10.25.255.254: icmp_req=6 ttl=64 time=7.42 ms But I can't ping past the LAN interface: root@server:# ping 10.25.255.1 PING 10.25.255.1 (10.25.255.1) 56(84) bytes of data. From 10.25.255.254: icmp_seq=1 Redirect Host(New nexthop: 10.25.255.1) From 10.25.255.254: icmp_seq=2 Redirect Host(New nexthop: 10.25.255.1) I ran a tcpdump on my em1 interface (LAN interface which has the IP of 10.25.255.254) tcpdump: verbose output suppressed, use -v or -vv for full protocol decode listening on em1, link-type EN10MB (Ethernet), capture size 96 bytes 08:21:13.449222 IP 10.25.24.1 > 10.25.255.1: ICMP echo request, id 23623, seq 10, length 64 08:21:13.458211 ARP, Request who-has 10.25.255.1 tell 10.25.24.1, length 28 08:21:14.450541 IP 10.25.24.1 > 10.25.255.1: ICMP echo request, id 23623, seq 11, length 64 08:21:14.458431 ARP, Request who-has 10.25.255.1 tell 10.25.24.1, length 28 08:21:15.451794 IP 10.25.24.1 > 10.25.255.1: ICMP echo request, id 23623, seq 12, length 64 08:21:15.458530 ARP, Request who-has 10.25.255.1 tell 10.25.24.1, length 28 08:21:16.453203 IP 10.25.24.1 > 10.25.255.1: ICMP echo request, id 23623, seq 13, length 64 So traffic is reaching the LAN interface, but it's not getting passed it. But no answer from the 10.25.255.1 host. I'm not sure what I'm missing.

  Read the article

• Configuring vlans on Cisco SG200 series switch with Ubuntu server

  - by nixnotwin

  I created a vlan on Ubuntu with vconfig tool with 21 as id and eth1 as the host port. I connected eth1 to one of the ports on the swtich (GE23) as all ports trunk by default. In the webgui I created a vlan named test with the id 21 and I made GE2 are port as an access port. In port to vlan mapping I selected vlan 21 and added it port GE2 by selecting untagged option. I have assigned 192.168.1.1/24 as the ip of eth1.21 on Ubuntu. If I connect another cleint pc to GE2 port with a ip of 192.168.1.2/24 I cannot ping the server ip (192.168.1.1/24). Ping from server to client also does not work. I inspected packets that are sent out eth1 on the server and I could see the vlan 21 tag. And I connect the other end of the cable to a different Linux pc and inspected the packets but no vlan tags can be seen. What could be preventing me from getting vlans working? Edit 1 screenshots:

  Read the article

• Excel: count number of unique/distinct row in range with condition

  - by Bertvan

  I have a an excel sheet with: in Col A: week numbers in Col B: dates (timesheet entries) I need to know the number of days worked for each week, so I need to the number of unique date entries per week number. I found formula's (both array as non-array) that handle this for a fixed range, but I want to have the results in another column per week number. So, the result of the added dataset below would be (the colon is just for clarity): 14: 2 15: 3 17: 6 20: 2 21: 3 If this is the source data: 14: 4/04/2012 14: 4/04/2012 15: 10/04/2012 15: 10/04/2012 15: 11/04/2012 17: 26/04/2012 17: 26/04/2012 17: 26/04/2012 17: 26/04/2012 17: 27/04/2012 17: 27/04/2012 20: 14/05/2012 20: 14/05/2012 21: 23/05/2012 21: 23/05/2012 21: 25/05/2012

  Read the article

• Identifying Httpd error log in Fedora 16

  - by Cerin

  How do you find the cause of httpd errors in Fedora 16? The new systemctl command in Fedora 16 seems to horribly obscure any useful logging info. [root@host ~]# systemctl start httpd.service Job failed. See system logs and 'systemctl status' for details. [root@host ~]# systemctl status httpd.service httpd.service - The Apache HTTP Server (prefork MPM) Loaded: loaded (/lib/systemd/system/httpd.service; enabled) Active: failed since Thu, 21 Jun 2012 16:26:56 -0400; 1min 23s ago Process: 2119 ExecStop=/usr/sbin/httpd $OPTIONS -k stop (code=exited, status=0/SUCCESS) Process: 2215 ExecStart=/usr/sbin/httpd $OPTIONS -k start (code=exited, status=1/FAILURE) Main PID: 1062 (code=exited, status=0/SUCCESS) CGroup: name=systemd:/system/httpd.service So the first command fails...and it tells me to run another command...which simply tells me that the command returned an error code. Where's the actual error? Even more frustrating is nothing seems to have been written to the logs: [root@host ~]# ls -lah /var/log/httpd/ total 8.0K drwx------. 2 root root 4.0K Jun 21 16:19 . drwxr-xr-x. 21 root root 4.0K Jun 20 16:33 .. -rw-r----- 1 root root 0 Jun 21 16:19 modsec_audit.log -rw-r----- 1 root root 0 Jun 21 16:19 modsec_debug.log

  Read the article

• Weird routing issue (updated)

  - by smccloud

  I just updated the route tables due to a mistake on my part. I am working on getting networking working correctly on a cluster of 14 virtual servers at a customer site. 11 of them work fine for routing and 3 don't work correctly for their administrative network (172.28.56.0). All are running Windows Web Server 2008R2. Default gateway is set on the production network (172.28.58.0) and not on the administrative network (handled with persistent static routes). On a working server, route print gives me the following (MACs redacted) =========================================================================== Interface List 11...XX XX XX XX XX XX ......Intel(R) PRO/1000 MT Network Connection 13...XX XX XX XX XX XX00 0c 29 85 b2 98 ......Intel(R) PRO/1000 MT Network Connection #2 1...........................Software Loopback Interface 1 12...00 00 00 00 00 00 00 e0 Microsoft ISATAP Adapter 14...00 00 00 00 00 00 00 e0 Microsoft ISATAP Adapter #2 15...00 00 00 00 00 00 00 e0 Teredo Tunneling Pseudo-Interface =========================================================================== IPv4 Route Table =========================================================================== Active Routes: Network Destination Netmask Gateway Interface Metric 0.0.0.0 0.0.0.0 172.28.58.1 172.28.58.11 266 10.18.1.22 255.255.255.255 172.28.58.1 172.28.58.11 11 10.32.0.0 255.255.0.0 172.28.56.1 172.28.56.201 11 127.0.0.0 255.0.0.0 On-link 127.0.0.1 306 127.0.0.1 255.255.255.255 On-link 127.0.0.1 306 127.255.255.255 255.255.255.255 On-link 127.0.0.1 306 172.28.34.0 255.255.255.0 172.28.56.1 172.28.56.201 11 172.28.42.0 255.255.255.0 172.28.56.1 172.28.56.201 11 172.28.56.0 255.255.255.0 On-link 172.28.56.201 266 172.28.56.0 255.255.255.0 172.28.56.1 172.28.56.201 11 172.28.56.201 255.255.255.255 On-link 172.28.56.201 266 172.28.56.255 255.255.255.255 On-link 172.28.56.201 266 172.28.58.0 255.255.255.224 On-link 172.28.58.11 266 172.28.58.0 255.255.255.224 172.28.58.1 172.28.58.11 11 172.28.58.1 255.255.255.255 172.28.58.1 172.28.58.11 11 172.28.58.11 255.255.255.255 On-link 172.28.58.11 266 172.28.58.31 255.255.255.255 On-link 172.28.58.11 266 172.28.60.0 255.255.255.0 172.28.56.1 172.28.56.201 11 172.28.63.0 255.255.255.0 172.28.56.1 172.28.56.201 11 192.168.0.0 255.255.0.0 172.28.56.1 172.28.56.201 11 224.0.0.0 240.0.0.0 On-link 127.0.0.1 306 224.0.0.0 240.0.0.0 On-link 172.28.56.201 266 224.0.0.0 240.0.0.0 On-link 172.28.58.11 266 255.255.255.255 255.255.255.255 On-link 127.0.0.1 306 255.255.255.255 255.255.255.255 On-link 172.28.56.201 266 255.255.255.255 255.255.255.255 On-link 172.28.58.11 266 =========================================================================== Persistent Routes: Network Address Netmask Gateway Address Metric 172.28.56.0 255.255.255.0 172.28.56.1 1 172.28.63.0 255.255.255.0 172.28.56.1 1 192.168.0.0 255.255.0.0 172.28.56.1 1 172.28.60.0 255.255.255.0 172.28.56.1 1 10.32.0.0 255.255.0.0 172.28.56.1 1 172.28.34.0 255.255.255.0 172.28.56.1 1 172.28.42.0 255.255.255.0 172.28.56.1 1 0.0.0.0 0.0.0.0 172.28.58.1 Default =========================================================================== IPv6 Route Table =========================================================================== Active Routes: If Metric Network Destination Gateway 1 306 ::1/128 On-link 1 306 ff00::/8 On-link =========================================================================== Persistent Routes: None On one of the non-working server, route print gives me the following (MACs redacted) =========================================================================== Interface List 11...XX XX XX XX XX XX ......Intel(R) PRO/1000 MT Network Connection 13...XX XX XX XX XX XX ......Intel(R) PRO/1000 MT Network Connection #2 1...........................Software Loopback Interface 1 12...00 00 00 00 00 00 00 e0 Microsoft ISATAP Adapter 14...00 00 00 00 00 00 00 e0 Microsoft ISATAP Adapter #2 16...00 00 00 00 00 00 00 e0 Teredo Tunneling Pseudo-Interface =========================================================================== IPv4 Route Table =========================================================================== Active Routes: Network Destination Netmask Gateway Interface Metric 0.0.0.0 0.0.0.0 172.28.58.1 172.28.58.21 266 10.32.0.0 255.255.0.0 172.28.56.1 172.28.56.211 11 127.0.0.0 255.0.0.0 On-link 127.0.0.1 306 127.0.0.1 255.255.255.255 On-link 127.0.0.1 306 127.255.255.255 255.255.255.255 On-link 127.0.0.1 306 172.28.34.0 255.255.255.0 172.28.56.1 172.28.56.211 11 172.28.42.0 255.255.255.0 172.28.56.1 172.28.56.211 11 172.28.56.0 255.255.255.0 172.28.56.1 172.28.56.211 11 172.28.56.211 255.255.255.255 On-link 172.28.56.211 266 172.28.58.0 255.255.255.0 172.28.58.1 172.28.58.21 11 172.28.58.0 255.255.255.224 On-link 172.28.58.21 266 172.28.58.21 255.255.255.255 On-link 172.28.58.21 266 172.28.58.31 255.255.255.255 On-link 172.28.58.21 266 172.28.60.0 255.255.255.0 172.28.56.1 172.28.56.211 11 172.28.63.0 255.255.255.0 172.28.56.1 172.28.56.211 11 192.168.0.0 255.255.0.0 172.28.56.1 172.28.56.211 11 224.0.0.0 240.0.0.0 On-link 127.0.0.1 306 224.0.0.0 240.0.0.0 On-link 172.28.56.211 266 224.0.0.0 240.0.0.0 On-link 172.28.58.21 266 255.255.255.255 255.255.255.255 On-link 127.0.0.1 06 255.255.255.255 255.255.255.255 On-link 172.28.56.211 266 255.255.255.255 255.255.255.255 On-link 172.28.58.21 266 =========================================================================== Persistent Routes: Network Address Netmask Gateway Address Metric 172.28.56.0 255.255.255.0 172.28.56.1 1 172.28.60.0 255.255.255.0 172.28.56.1 1 172.28.63.0 255.255.255.0 172.28.56.1 1 172.28.34.0 255.255.255.0 172.28.56.1 1 172.28.42.0 255.255.255.0 172.28.56.1 1 192.168.0.0 255.255.0.0 172.28.56.1 1 10.32.0.0 255.255.0.0 172.28.56.1 1 0.0.0.0 0.0.0.0 172.28.58.1 Default 172.28.58.0 255.255.255.0 172.28.58.1 1 =========================================================================== IPv6 Route Table =========================================================================== Active Routes: If Metric Network Destination Gateway 1 306 ::1/128 On-link 1 306 ff00::/8 On-link =========================================================================== Persistent Routes: None I am at a complete loss why the non-working servers have no On-link route for 172.28.56.0. Does anyone have any suggestions on what I should be looking at to figure this out? Also, I do have "physical" access to the console if needed through vSphere Client.

  Read the article

• Why is my Linux box dropping network connection? [closed]

  - by Robo

  I have a Debian server in the form of a Raspberry Pi running Raspian. It has a USB Wi-Fi connection. Sometimes it would not respond when I SSH to it, and would require a reboot. I found something in syslog that may indicate what the problem is, can someone help with what this means? Dec 16 15:34:17 raspberrypi wpa_supplicant[1501]: wlan0: WPA: Group rekeying completed with 00:21:29:6c:5c:3d [GTK=CCMP] Dec 16 16:17:01 raspberrypi /USR/SBIN/CRON[2109]: (root) CMD ( cd / && run-parts --report /etc/cron.hourly) Dec 16 16:34:17 raspberrypi wpa_supplicant[1501]: wlan0: WPA: Group rekeying completed with 00:21:29:6c:5c:3d [GTK=CCMP] Dec 16 17:17:01 raspberrypi /USR/SBIN/CRON[2127]: (root) CMD ( cd / && run-parts --report /etc/cron.hourly) Dec 16 17:34:17 raspberrypi wpa_supplicant[1501]: wlan0: WPA: Group rekeying completed with 00:21:29:6c:5c:3d [GTK=CCMP] Dec 16 18:17:01 raspberrypi /USR/SBIN/CRON[2142]: (root) CMD ( cd / && run-parts --report /etc/cron.hourly) Dec 16 18:34:17 raspberrypi wpa_supplicant[1501]: wlan0: WPA: Group rekeying completed with 00:21:29:6c:5c:3d [GTK=CCMP] Dec 16 19:17:01 raspberrypi /USR/SBIN/CRON[2161]: (root) CMD ( cd / && run-parts --report /etc/cron.hourly) Dec 16 19:31:29 raspberrypi kernel: [16615.391509] ieee80211 phy0: wlan0: No probe response from AP 00:21:29:6c:5c:3d after 500ms, disconnecting. Dec 16 19:31:29 raspberrypi wpa_supplicant[1501]: wlan0: CTRL-EVENT-DISCONNECTED bssid=00:21:29:6c:5c:3d reason=4 Dec 16 19:31:29 raspberrypi kernel: [16615.416189] cfg80211: Calling CRDA to update world regulatory domain Dec 16 19:31:30 raspberrypi ifplugd(wlan0)[1444]: Link beat lost. Dec 16 19:31:40 raspberrypi ifplugd(wlan0)[1444]: Executing '/etc/ifplugd/ifplugd.action wlan0 down'. Dec 16 19:31:40 raspberrypi wpa_supplicant[1501]: wlan0: CTRL-EVENT-TERMINATING - signal 15 received Dec 16 19:31:40 raspberrypi ifplugd(wlan0)[1444]: Program executed successfully. Dec 16 19:31:42 raspberrypi ntpd[1928]: Deleting interface #2 wlan0, 192.168.1.10#123, interface stats: received=321, sent=327, dropped=0, active_time=16596 secs Dec 16 19:31:42 raspberrypi ntpd[1928]: 202.6.116.123 interface 192.168.1.10 -> (none) Dec 16 19:31:42 raspberrypi ntpd[1928]: 203.99.128.34 interface 192.168.1.10 -> (none) Dec 16 19:31:42 raspberrypi ntpd[1928]: 203.118.148.40 interface 192.168.1.10 -> (none) Dec 16 19:31:42 raspberrypi ntpd[1928]: 202.89.49.65 interface 192.168.1.10 -> (none) Dec 16 19:31:42 raspberrypi ntpd[1928]: peers refreshed

  Read the article

• SQUID proxy - open FTP (and other ports)

  - by gaffcz

  elpeHow can I open other ports than HTTP and HTTPS using SQUID proxy? I have last version of squid running on Fedora 10 but I'm not able to open FTP port. part of my squid.conf: acl manager proto cache_object acl localhost src 127.0.0.1/32 ::1 acl to_localhost dst 127.0.0.0/8 0.0.0.0/32 ::1 acl ftp proto FTP acl ftp_port port 21 always_direct allow FTP acl SSL_ports port 443 20 21 22 acl Safe_ports port 20 # ftp acl Safe_ports port 21 # ftp acl Safe_ports port 22 # sftp acl Safe_ports port 80 # http acl Safe_ports port 280 # http-mgmt acl Safe_ports port 443 # https acl Safe_ports port 1025-65535 # uregistred ports acl CONNECT method CONNECT http_access allow manager localhost http_access deny manager # USER privilegies (encoded in file passwd) auth_param basic program /usr/lib/squid/ncsa_auth /etc/squid/passwd acl AUTHUSERS proxy_auth REQUIRED # BLACKLIST (in file denied.conf) acl denied_domains dstdomain "/etc/squid/DNDdomains.conf" acl denied_regex url_regex "/etc/squid/DNDregex.conf" http_access deny denied_regex http_access deny denied_domains http_access allow AUTHUSERS http_access deny !Safe_ports http_access deny CONNECT !SSL_ports http_access allow ftp_port CONNECT http_access allow ftp http_access allow localhost http_access deny all #http_reply_access allow all #http_access allow all http_port 3128 hierarchy_stoplist cgi-bin ? cache_dir ufs /var/spool/squid 10000 16 256 coredump_dir /var/spool/squid refresh_pattern ^ftp: 1440 20% 10080 refresh_pattern -i (/cgi-bin/|\?) 0 0% 0 refresh_pattern . 0 20% 4320 I've tried to add: acl ftp proto FTP / acl ftp_port port 21 http_access allow ftp add/remove ports 20,21 from SSL_PORTS list set the iptables But nothing helped. It is even possible to use a new version of squid for FTP transfer?

  Read the article

• Cannot establish XMPP server-to-server connection to gmail

  - by v_2e

  My jabber-server fails to connect to gmail.com giving the error: outgoing s2s stream myserver.com.ua-bot.talk.google.com closed: undefined-condition (myserver.com.ua is a Google Apps Domain with Talk service enabled.) I am using the Prosody XMPP server. It works just fine with other jabber-servers I tested so far (e.g. jabber.ru). However, when some of my clients tries to add a gmail contact to his contact-list, the subscription request lasts forever, and the Prosody gives the following sequence of messages in its log: Oct 21 22:57:16 s2sout95897f8 info Beginning new connection attempt to gmail.com ([173.194.70.125]:5269) Oct 21 22:57:16 s2sout95897f8 info sent dialback key on outgoing s2s stream Oct 21 22:57:16 s2sout95897f8 info Session closed by remote with error: undefined-condition (myserver.com.ua is a Google Apps Domain with Talk service enabled.) Oct 21 22:57:16 s2sout95897f8 info outgoing s2s stream myserver.com.ua->gmail.com closed: undefined-condition (myserver.com.ua is a Google Apps Domain with Talk service enabled.) Oct 21 22:57:16 s2sout95897f8 info sending error replies for 2 queued stanzas because of failed outgoing connection to gmail.com Here for the domain name of my server I use myserver.com.ua I found a similar problem described in this thread, but there is no detailed description of the solution there. As for the Google services, I did have a google account where I added the domain name under question to the Webmasters tools page. However, I deleted my account long ago, so now it is unclear, how any of the Google services can relate to my domain name. So my question is: What is the real cause of this problem (my jabber-server configuration or imaginary Google account or something else) and how can I make my Prosody server connect to gmail.com jabber service?

  Read the article

• Apache server completely freezes until it gets restarted

  - by nbv4

  My server does this every few days. What sucks is that it always seems to do this right after I go to bed, so when I wake up, I'm greeted with the fact that my server has been down for the past 6 or 7 hours. When I first noticed this, I added a cronjob that tries to restart the server every 15 minutes, but I guess that didn't fix it. Once I noticed the server was down, I can this command: /etc/init.d/apache2 restart * Restarting web server apache2 apache2: Could not reliably determine the server's fully qualified domain name, using 127.0.0.1 for ServerName ... waiting ...........................................................apache2: Could not reliably determine the server's fully qualified domain name, using 127.0.0.1 for ServerName httpd (pid 17597) already running ...which is odd, because a restart should restart the server, even if it's already running, correct? I eventually had to "stop" then "start" to get it working again. I then looked through the logs, and found something very weird. It seems that around the time the server crashed, the logs have entries that are wildly out of order. It looks a little like this: xx.xxx.xxx.x - - [21/Apr/2010:06:32:05 -0400] "GET / blah" xx.xxx.xxx.x - - [21/Apr/2010:06:51:25 -0400] "GET / blah" x.xx.xxx.xxx - - [21/Apr/2010:06:38:23 -0400] "GET / blah" xxx.xx.xx.xx - - [21/Apr/2010:06:31:56 -0400] "GET / blah" xxx.xx.xx.xx - - [21/Apr/2010:06:51:49 -0400] "GET / blah" xx.xx.xxx.xx - - [21/Apr/2010:06:33:20 -0400] "GET / blah" I don't think the problem is memory, because this: tells me that right before the crash, memory usage is fine. I'm running apache with the worker mpm, here are the settings for that: <IfModule mpm_worker_module> StartServers 1 MaxClients 100 MinSpareThreads 5 MaxSpareThreads 10 ThreadsPerChild 10 MaxRequestsPerChild 3000 </IfModule> This apache server is running a bunch of stuff, but most of the traffic comes from a django project I'm hosting, that uses mod_wsgi. There also is a simple machines forum that is running off of mod_fcgid. Those setting are below: <IfModule mod_fcgid.c> MaxRequestsPerProcess 500 MaxProcessCount 3 AddHandler fcgid-script .php .fcgi AddHandler cgi-script .cgi .pl FCGIWrapper "/usr/bin/php-cgi" .php </IfModule> Anyone know of anything else I can check? I've just about tweaked every single setting I can think of, yet these freezes still happen.

  Read the article

• mysql-proxy got error which cause it to crash

  - by nonus25

  I got that message and i dont know what it is means: Oct 21 12:24:26 lex mysql-proxy: 2013-10-21 12:24:26: ((error)) last message repeated 98 times Oct 21 12:24:26 lex mysql-proxy: 2013-10-21 12:24:26: ((error)) network-mysqld-packet.c.596: COM_(0x04) should not be (OK|ERR|NULL), got: 00 Oct 21 12:24:26 lex kernel: [4163416.207121] mysql-proxy[14271] trap int3 ip:7ff96e8a4313 sp:7fffb9086ad0 error:0 Any idea what can be the cause of it ?

  Read the article

• SQL IO and SAN troubles

  - by James

  We are running two servers with identical software setup but different hardware. The first one is a VM on VMWare on a normal tower server with dual core xeons, 16 GB RAM and a 7200 RPM drive. The second one is a VM on XenServer on a powerful brand new rack server, with 4 core xeons and shared storage. We are running Dynamics AX 2012 and SQL Server 2008 R2. When I insert 15 000 records into a table on the slow tower server (as a test), it does so in 13 seconds. On the fast server it takes 33 seconds. I re-ran these tests several times with the same results. I have a feeling it is some sort of IO bottleneck, so I ran SQLIO on both. Here are the results for the slow tower server: C:\Program Files (x86)\SQLIO>test.bat C:\Program Files (x86)\SQLIO>sqlio -kW -t8 -s120 -o8 -frandom -b8 -BH -LS C:\Tes tFile.dat sqlio v1.5.SG using system counter for latency timings, 14318180 counts per second 8 threads writing for 120 secs to file C:\TestFile.dat using 8KB random IOs enabling multiple I/Os per thread with 8 outstanding buffering set to use hardware disk cache (but not file cache) using current size: 5120 MB for file: C:\TestFile.dat initialization done CUMULATIVE DATA: throughput metrics: IOs/sec: 226.97 MBs/sec: 1.77 latency metrics: Min_Latency(ms): 0 Avg_Latency(ms): 281 Max_Latency(ms): 467 histogram: ms: 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24+ %: 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 99 C:\Program Files (x86)\SQLIO>sqlio -kR -t8 -s120 -o8 -frandom -b8 -BH -LS C:\Tes tFile.dat sqlio v1.5.SG using system counter for latency timings, 14318180 counts per second 8 threads reading for 120 secs from file C:\TestFile.dat using 8KB random IOs enabling multiple I/Os per thread with 8 outstanding buffering set to use hardware disk cache (but not file cache) using current size: 5120 MB for file: C:\TestFile.dat initialization done CUMULATIVE DATA: throughput metrics: IOs/sec: 91.34 MBs/sec: 0.71 latency metrics: Min_Latency(ms): 14 Avg_Latency(ms): 699 Max_Latency(ms): 1124 histogram: ms: 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24+ %: 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 100 C:\Program Files (x86)\SQLIO>sqlio -kW -t8 -s120 -o8 -fsequential -b64 -BH -LS C :\TestFile.dat sqlio v1.5.SG using system counter for latency timings, 14318180 counts per second 8 threads writing for 120 secs to file C:\TestFile.dat using 64KB sequential IOs enabling multiple I/Os per thread with 8 outstanding buffering set to use hardware disk cache (but not file cache) using current size: 5120 MB for file: C:\TestFile.dat initialization done CUMULATIVE DATA: throughput metrics: IOs/sec: 1094.50 MBs/sec: 68.40 latency metrics: Min_Latency(ms): 0 Avg_Latency(ms): 58 Max_Latency(ms): 467 histogram: ms: 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24+ %: 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 100 C:\Program Files (x86)\SQLIO>sqlio -kR -t8 -s120 -o8 -fsequential -b64 -BH -LS C :\TestFile.dat sqlio v1.5.SG using system counter for latency timings, 14318180 counts per second 8 threads reading for 120 secs from file C:\TestFile.dat using 64KB sequential IOs enabling multiple I/Os per thread with 8 outstanding buffering set to use hardware disk cache (but not file cache) using current size: 5120 MB for file: C:\TestFile.dat initialization done CUMULATIVE DATA: throughput metrics: IOs/sec: 1155.31 MBs/sec: 72.20 latency metrics: Min_Latency(ms): 17 Avg_Latency(ms): 55 Max_Latency(ms): 205 histogram: ms: 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24+ %: 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 100 Here are the results of the fast rack server: C:\Program Files (x86)\SQLIO>test.bat C:\Program Files (x86)\SQLIO>sqlio -kW -t8 -s120 -o8 -frandom -b8 -BH -LS E:\Tes tFile.dat sqlio v1.5.SG using system counter for latency timings, 62500000 counts per second 8 threads writing for 120 secs to file E:\TestFile.dat using 8KB random IOs enabling multiple I/Os per thread with 8 outstanding buffering set to use hardware disk cache (but not file cache) open_file: CreateFile (E:\TestFile.dat for write): The system cannot find the pa th specified. exiting C:\Program Files (x86)\SQLIO>sqlio -kR -t8 -s120 -o8 -frandom -b8 -BH -LS E:\Tes tFile.dat sqlio v1.5.SG using system counter for latency timings, 62500000 counts per second 8 threads reading for 120 secs from file E:\TestFile.dat using 8KB random IOs enabling multiple I/Os per thread with 8 outstanding buffering set to use hardware disk cache (but not file cache) open_file: CreateFile (E:\TestFile.dat for read): The system cannot find the pat h specified. exiting C:\Program Files (x86)\SQLIO>sqlio -kW -t8 -s120 -o8 -fsequential -b64 -BH -LS E :\TestFile.dat sqlio v1.5.SG using system counter for latency timings, 62500000 counts per second 8 threads writing for 120 secs to file E:\TestFile.dat using 64KB sequential IOs enabling multiple I/Os per thread with 8 outstanding buffering set to use hardware disk cache (but not file cache) open_file: CreateFile (E:\TestFile.dat for write): The system cannot find the pa th specified. exiting C:\Program Files (x86)\SQLIO>sqlio -kR -t8 -s120 -o8 -fsequential -b64 -BH -LS E :\TestFile.dat sqlio v1.5.SG using system counter for latency timings, 62500000 counts per second 8 threads reading for 120 secs from file E:\TestFile.dat using 64KB sequential IOs enabling multiple I/Os per thread with 8 outstanding buffering set to use hardware disk cache (but not file cache) open_file: CreateFile (E:\TestFile.dat for read): The system cannot find the pat h specified. exiting C:\Program Files (x86)\SQLIO>test.bat C:\Program Files (x86)\SQLIO>sqlio -kW -t8 -s120 -o8 -frandom -b8 -BH -LS c:\Tes tFile.dat sqlio v1.5.SG using system counter for latency timings, 62500000 counts per second 8 threads writing for 120 secs to file c:\TestFile.dat using 8KB random IOs enabling multiple I/Os per thread with 8 outstanding buffering set to use hardware disk cache (but not file cache) using current size: 5120 MB for file: c:\TestFile.dat initialization done CUMULATIVE DATA: throughput metrics: IOs/sec: 2575.77 MBs/sec: 20.12 latency metrics: Min_Latency(ms): 1 Avg_Latency(ms): 24 Max_Latency(ms): 655 histogram: ms: 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24+ %: 0 0 0 5 8 9 9 9 8 5 3 1 1 1 1 0 0 0 0 0 0 0 0 0 37 C:\Program Files (x86)\SQLIO>sqlio -kR -t8 -s120 -o8 -frandom -b8 -BH -LS c:\Tes tFile.dat sqlio v1.5.SG using system counter for latency timings, 62500000 counts per second 8 threads reading for 120 secs from file c:\TestFile.dat using 8KB random IOs enabling multiple I/Os per thread with 8 outstanding buffering set to use hardware disk cache (but not file cache) using current size: 5120 MB for file: c:\TestFile.dat initialization done CUMULATIVE DATA: throughput metrics: IOs/sec: 1141.39 MBs/sec: 8.91 latency metrics: Min_Latency(ms): 1 Avg_Latency(ms): 55 Max_Latency(ms): 652 histogram: ms: 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24+ %: 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1 91 C:\Program Files (x86)\SQLIO>sqlio -kW -t8 -s120 -o8 -fsequential -b64 -BH -LS c :\TestFile.dat sqlio v1.5.SG using system counter for latency timings, 62500000 counts per second 8 threads writing for 120 secs to file c:\TestFile.dat using 64KB sequential IOs enabling multiple I/Os per thread with 8 outstanding buffering set to use hardware disk cache (but not file cache) using current size: 5120 MB for file: c:\TestFile.dat initialization done CUMULATIVE DATA: throughput metrics: IOs/sec: 341.37 MBs/sec: 21.33 latency metrics: Min_Latency(ms): 5 Avg_Latency(ms): 186 Max_Latency(ms): 120037 histogram: ms: 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24+ %: 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 100 C:\Program Files (x86)\SQLIO>sqlio -kR -t8 -s120 -o8 -fsequential -b64 -BH -LS c :\TestFile.dat sqlio v1.5.SG using system counter for latency timings, 62500000 counts per second 8 threads reading for 120 secs from file c:\TestFile.dat using 64KB sequential IOs enabling multiple I/Os per thread with 8 outstanding buffering set to use hardware disk cache (but not file cache) using current size: 5120 MB for file: c:\TestFile.dat initialization done CUMULATIVE DATA: throughput metrics: IOs/sec: 1024.07 MBs/sec: 64.00 latency metrics: Min_Latency(ms): 5 Avg_Latency(ms): 61 Max_Latency(ms): 81632 histogram: ms: 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24+ %: 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 100 Three of the four tests are, to my mind, within reasonable parameters for the rack server. However, the 64 write test is incredibly slow on the rack server. (68 mb/sec on the slow tower vs 21 mb/s on the rack). The read speed for 64k also seems slow. Is this enough to say there is some sort of bottleneck with the shared storage? I need to know if I can take this evidence and say we need to launch an investigation into this. Any help is appreciated.

  Read the article

• Cannot establish XMPP server-to-server connection with gmail

  - by v_2e

  My jabber-server fails to connect to gmail.com giving the error: outgoing s2s stream myserver.com.ua-bot.talk.google.com closed: undefined-condition (myserver.com.ua is a Google Apps Domain with Talk service enabled.) I am using the Prosody XMPP server. It works just fine with other jabber-servers I tested so far (e.g. jabber.ru). However, when some of my clients tries to add a gmail contact to his contact-list, the subscription request lasts forever, and the Prosody gives the following sequence of messages in its log: Oct 21 22:57:16 s2sout95897f8 info Beginning new connection attempt to gmail.com ([173.194.70.125]:5269) Oct 21 22:57:16 s2sout95897f8 info sent dialback key on outgoing s2s stream Oct 21 22:57:16 s2sout95897f8 info Session closed by remote with error: undefined-condition (myserver.com.ua is a Google Apps Domain with Talk service enabled.) Oct 21 22:57:16 s2sout95897f8 info outgoing s2s stream myserver.com.ua->gmail.com closed: undefined-condition (myserver.com.ua is a Google Apps Domain with Talk service enabled.) Oct 21 22:57:16 s2sout95897f8 info sending error replies for 2 queued stanzas because of failed outgoing connection to gmail.com Here for the domain name of my server I use myserver.com.ua I found a similar problem described in this thread, but there is no detailed description of the solution there. As for the Google services, I did have a google account where I added the domain name under question to the Webmasters tools page. However, I deleted my account long ago, so now it is unclear, how any of the Google services can relate to my domain name. So my question is: What is the real cause of this problem (my jabber-server configuration or imaginary Google account or something else) and how can I make my Prosody server connect to gmail.com jabber service?

  Read the article

• Excessive Outbound DNS Traffic

  - by user1318414

  I have a VPS system which I have had for 3 years on one host without issue. Recently, the host started sending an extreme amount of outbound DNS traffic to 31.193.132.138. Due to the way that Linode responded to this, I have recently left Linode and moved to 6sync. The server was completely rebuilt on 6sync with the exception of postfix mail configurations. Currently, the daemons run are as follows: sshd nginx postfix dovecot php5-fpm (localhost only) spampd (localhost only) clamsmtpd (localhost only) Given that the server was 100% rebuilt, I can't find any serious exploits against the above stated daemons, passwords have changed, ssh keys don't even exist on the rebuild yet, etc... it seems extremely unlikely that this is a compromise which is being used to DoS the address. The provided IP is noted online as a known SPAM source. My initial assumption was that it was attempting to use my postfix server as a relay, and the bogus addresses it was providing were domains with that IP registered as their nameservers. I would imagine given my postfix configuration that DNS queries for things such as SPF information would come in with equal or greater amount than the number of attempted spam e-mails sent. Both Linode and 6Sync have said that the outbound traffic is extremely disproportionate. The following is all the information I received from Linode regarding the outbound traffic: 21:28:28.647263 IP 97.107.134.33.32775 > 31.193.132.138.53: 28720 op8+% [b2&3=0x4134] [17267a] [30550q] [28773n] [14673au][|domain] 21:28:28.647264 IP 97.107.134.33 > 31.193.132.138: udp 21:28:28.647264 IP 97.107.134.33.32775 > 31.193.132.138.53: 28720 op8+% [b2&3=0x4134] [17267a] [30550q] [28773n] [14673au][|domain] 21:28:28.647265 IP 97.107.134.33 > 31.193.132.138: udp 21:28:28.647265 IP 97.107.134.33.32775 > 31.193.132.138.53: 28720 op8+% [b2&3=0x4134] [17267a] [30550q] [28773n] [14673au][|domain] 21:28:28.647266 IP 97.107.134.33 > 31.193.132.138: udp 6sync cannot confirm whether or not the recent spike in outbound traffic was to the same IP or over DNS, but I have presumed as such. For now my server is blocking the entire 31.0.0.0/8 subnet to help deter this while I figure it out. Anyone have any idea what is going on?

  Read the article

• Identifying Service Error in Fedora 16

  - by Cerin

  How do you find the cause of a failed service start in Fedora 16? The new systemctl command in Fedora 16 seems to horribly obscure any useful logging info. [root@host ~]# systemctl start httpd.service Job failed. See system logs and 'systemctl status' for details. [root@host ~]# systemctl status httpd.service httpd.service - The Apache HTTP Server (prefork MPM) Loaded: loaded (/lib/systemd/system/httpd.service; enabled) Active: failed since Thu, 21 Jun 2012 16:26:56 -0400; 1min 23s ago Process: 2119 ExecStop=/usr/sbin/httpd $OPTIONS -k stop (code=exited, status=0/SUCCESS) Process: 2215 ExecStart=/usr/sbin/httpd $OPTIONS -k start (code=exited, status=1/FAILURE) Main PID: 1062 (code=exited, status=0/SUCCESS) CGroup: name=systemd:/system/httpd.service So the first command fails...and it tells me to run another command...which simply tells me that the command returned an error code. Where's the actual error? Even more frustrating is nothing seems to have been written to the logs: [root@host ~]# ls -lah /var/log/httpd/ total 8.0K drwx------. 2 root root 4.0K Jun 21 16:19 . drwxr-xr-x. 21 root root 4.0K Jun 20 16:33 .. -rw-r----- 1 root root 0 Jun 21 16:19 modsec_audit.log -rw-r----- 1 root root 0 Jun 21 16:19 modsec_debug.log

  Read the article

• Proxmox: VMs and different public IPs

  - by Raj

  I have a server which has two NICs and both are directly connected to internet. I have five different public IP addresses available for the VMs. The host machine (Proxmox) doesn't need to use any (it'll use a private IP and that's all) but will have internet connection. I've gone through the Proxmox documentation and I'm not able to understand the big picture to set up the right network configuration for my needs. In short, what I have is: One server (Proxmox, host machine) On that server, 5 VMs are created 5 public IP addresses available (one for each VM), let's say: 80.123.21.1, 80.123.21.2, 80.123.21.3, 80.123.21.4, 80.123.21.5 What I have now for the host is the following: auto lo iface lo inet loopback auto eth0 iface eth0 inet manual auto eth1 iface eth1 inet manual auto vmbr0 iface vmbr0 inet static address 192.168.1.101 netmask 255.255.255.0 bridge_ports eth0 bridge_stp off bridge_fd 0 auto vmbr1 iface vmbr1 inet manual It can be reached from the internal network, so that's OK. It has internet connection, which is also OK. vmbr1 is going to be used by the VMs. Each VM will have its own IP on his network interfaces configuration file. For some reason, VMs will not have internet and they won't be able to have public IP address. If I use NAT, it will work correctly, but they will not use the public allocated IP addresses for them. Am I missing something?

  Read the article

• can i use an ip-list include file for iptable blacklisting

  - by rubo77

  I would like to block all countries except mine in iptables, that is a lits with about 100.000 Entries. how can i define this blacklistfile in a script, so iptables blocks all those ip-ranges? maybe i can use http://www.ipdeny.com/ipblocks/data/countries/ that provides lists in the form 117.55.192.0/20 117.104.224.0/21 119.59.80.0/21 121.100.48.0/21 ... i want to be able to change the blacklistfile easily without having to change the iptables-script

  Read the article

• What's the extra FTP port here?

  - by warl0ck

  While downloading a tar ball from gnu's FTP server, I found that other than standard 21 TCP port connection, I also seeing an extra connection: tcp 0 0 192.168.1.109:45056 208.118.235.20:21 ESTABLISHED 10956/wget tcp 0 0 192.168.1.109:56724 208.118.235.20:22259 ESTABLISHED 10956/wget What that port is used for? I checked /etc/services, only 20 and 21 should be in use, am I wrong? The command in use was wget 'ftp://ftp.gnu.org/gnu/tar/tar-1.26.tar.xz'

  Read the article

• This Android SDK requires Android Developer Toolkit version 22.0.0 or above. Current version is 21.x.x.

  - by user2626673

  Hi i have a problem with my Eclipse and the SDK (i have download and install the latest ADT Bundle for windows ) when i start my eclipse i get this problem : This Android SDK requires Android Developer Toolkit version 22.0.0 or above. Current version is 20.0.0. please update your SDK tools to the latest version i have tried the option : Help - check for updates But with no new update find then i try this one : How to Update your ADT to Latest Version In Eclipse go to Help Install New Software ---> Add inside Add Repository write the Name: ADT (or whatever you want) and Location: https://dl-ssl.google.com/android/eclipse/ after loading you should get Developer Tools and NDK Plugins check both if you want to use the Native Developer Kit (NDK) in the future or check Developer Tool only click Next Finish But i dont have the option to click next to finish (the back , next and finish options are grey ) Then i try this method : Go here download latest version of ADT-22.0.4.zip (*) At Eclipse > Help > Install new software... > Uncheck Contact all update sites during install to find required software (last bottom preference) that will avoid any unwanted delays during install. then at the same screen (top) Click Add > Archive > select downloaded ADT-X.X.X.zip > follow on screen installation steps But had the same problem when it was to finish the installation.. no option to click ''next'' then i try this one : Help – Install New Software in the ADT menu. Type https://dl-ssl.google.com/android/eclipse/site.xml in “Work with:” and Enter. You can see the “Developer Tools” item. Select it and click Next. Click Next one more. Click Finish accepting the terms of the license agreements. Click OK in the “Security Warning” window. Let the installer restart ADT after installing the tools. But and in this option have the same problem as above.. can click the ''next'' to finish http://i30.photobucket.com/albums/c316/caslor_1978/diafora/atdproblem_zps0d141b7b.jpg i check my version and it is the latest but have the problem http://i30.photobucket.com/albums/c316/caslor_1978/diafora/atdproblem2_zps81de6317.jpg How can i fix this problem ? any suggestion? Win7 / 32bit / java SE Development kit7 update 25

  Read the article

• Having two FTP ports for the user

  - by user1663896

  I'm running vsftpd on RedHat 6.4 using TLS/SSL on port 990. It works great. I have been tasked to have my VSFTPD server running on unencrypted port 21 as well. This gives my users to either use clear text FTP on port 21 or TLS/SSL on port 990. I have tried the following in my vsftpd.conf file and did not work. listen_port=990 listen_port=21 In my config file it has the following SSL parameters: chroot_local_user=YES ssl_enable=YES allow_anon_ssl=NO anonymous_enable=NO anon_world_readable_only=NO force_local_data_ssl=NO force_local_logins_ssl=NO require_ssl_reuse=NO Can VSFTPD run on port 21 and 990? Thanks in advanced.

  Read the article

• Explain DNS/Content/Registration with services such as Blogger and Go Daddy

  - by user8926

  I have this kind of settings for Google Sites and Blogger in Godaddy, below. I cannot get URL Framing (not URL masking) working with them. I am unsure what the problem, cannot understand what services such as Blogger and Godaddy really do. Wrong A-records in Go Daddy! ; A Records @ 3600 IN A 216.239.32.21 art 3600 IN A 64.202.189.170 abc 3600 IN A 64.202.189.170 @ 3600 IN A 216.239.34.21 @ 3600 IN A 216.239.36.21 @ 3600 IN A 216.239.38.21 lol 3600 IN A 64.202.189.170 ; CNAME Records www 3600 IN CNAME ghs.google.com mobilemail 3600 IN CNAME mobilemail-v01.prod.mesa1.secureserver.net pda 3600 IN CNAME mobilemail-v01.prod.mesa1.secureserver.net email 3600 IN CNAME email.secureserver.net imap 3600 IN CNAME imap.secureserver.net mail 3600 IN CNAME pop.secureserver.net pop 3600 IN CNAME pop.secureserver.net smtp 3600 IN CNAME smtp.secureserver.net ftp 3600 IN CNAME @ webmail 3600 IN CNAME webmail.secureserver.net e 3600 IN CNAME email.secureserver.net Please, explain the "Custom Domain" and how can I hide my blogger url? ok I am still unsure what the "custom domain" in blogger really mean, does it mean that the content hosting is moved to some other site? Or does it mean that it just hides the blogspot url with other url? Or is it this so-called "301" thing or "URL redirection" or something else? Related questions Control Content Hosting, DNS Hosting and Registration with command line?

  Read the article

• Spinup time failure

  - by bioShark

  I am not sure this is a real question or a bug I should report Ubuntu. Using: Ubuntu 11.10, on a Intel Q6600, Samsung Spinpoint F4 2TB. I have set my PC on Suspend and after I came back, pressed Enter and after logging in everything was back to normal. However, I had a message from Disk Utility that one disk reports errors. I entered Disk Utility, and my Samsung 2TB disk, the one on which my Ubuntu is installed, had the SMART Status turned red, with error message on it. The error was: Spinup time failed Value 21, Threshold value was 25 (so the error was reported because 21 < 25) I restarted and booted up in Windows to see what HD Tune is reporting. Unfortunately it was exactly the same 21/25. After reading up on Wiki about SMART and the errors, I discovered that Spinup time is the time required for the disk to reach full spinning speed in milliseconds. Then it hit me that, in Ubuntu I had Suspended the system, making essentially all my hardware stop. And when I rebooted to Windows, the hardware doesn't really stop, so SMART's reading of the Spinup time was still from Ubuntu's suspension. So I did a full PC stop and then booted up again, both in Ubuntu and Windows to see if there are different readings. Both reported successful Spinup time, 68 (a little better then 21 :) ), although in Disk Utility I have a nice message: Failed in the Past So now I am pretty sure that Ubuntu didn't handle the Suspend correctly, but then again should I worry about Imminent hardware failure ? Am I missing some drivers? Should I report this as a bug to Ubuntu? Sorry if this was a bad place to ask this question.

  Read the article

• One of the partion on a usb harddisk cannot automount

  - by holmescn

  It is a very strange problem. My usb harddisk has four partitions, one is primary, the other three are logical (contained within an extended partition). When I plug in the disk, three of the partitions are mounted automatically except one--the first logical partition in the extended partition. Initially I thought it is the problem of system (at that time I used Mint). But after I change to Ubuntu 12.04, the problem wasn't solved. I don't want to add a rule in fstab, and I want to know what happened. The disk is fine, and the partition can be accessed in Windows and mounted manually. result of dmesg | tail: [100933.557649] usb 2-1.2: new high-speed USB device number 4 using ehci_hcd [100933.651891] scsi8 : usb-storage 2-1.2:1.0 [100934.649047] scsi 8:0:0:0: Direct-Access SAMSUNG PQ: 0 ANSI: 0 [100934.650963] sd 8:0:0:0: Attached scsi generic sg2 type 0 [100934.651342] sd 8:0:0:0: [sdb] 625142448 512-byte logical blocks: (320 GB/298 GiB) [100934.651977] sd 8:0:0:0: [sdb] Write Protect is off [100934.651989] sd 8:0:0:0: [sdb] Mode Sense: 03 00 00 00 [100934.652836] sd 8:0:0:0: [sdb] No Caching mode page present [100934.652848] sd 8:0:0:0: [sdb] Assuming drive cache: write through [100934.655354] sd 8:0:0:0: [sdb] No Caching mode page present [100934.655367] sd 8:0:0:0: [sdb] Assuming drive cache: write through [100934.734652] sdb: sdb1 sdb3 < sdb5 sdb6 sdb7 > [100934.737706] sd 8:0:0:0: [sdb] No Caching mode page present [100934.737725] sd 8:0:0:0: [sdb] Assuming drive cache: write through [100934.737731] sd 8:0:0:0: [sdb] Attached SCSI disk result of parted -l: Model: SAMSUNG (scsi) Disk /dev/sdb: 320GB Sector size (logical/physical): 512B/512B Partition Table: msdos Number Start End Size Type File system Flags 1 32.3kB 21.5GB 21.5GB primary ntfs 3 21.5GB 320GB 299GB extended lba 5 21.5GB 129GB 107GB logical ntfs 6 129GB 236GB 107GB logical ntfs 7 236GB 320GB 83.8GB logical ntfs

  Read the article

• The remote server returned an error: 227 Entering Passive Mode

  - by hmloo

  Today while uploading file to FTP sever, the codes throw an error - "The remote server returned an error: 227 Entering Passive Mode", after research, I got some knowledge in FTP working principle. FTP may run in active or passive mode, which determines how the data connection is established. Active mode: command connection: client >1024  -> server 21 data connection:    client >1024  <-  server 20 passive mode: command connection: client > 1024 -> server 21 data connection:    client > 1024 <- server > 1024 In active mode, the client connects from a random unprivileged port (N > 1023) to the FTP server's command port(default port 21). If the client needs to transfer data, the client will use PORT command to tell the server:"hi, I opened port XXXX, please connect to me." and then server will use port 20 to initiate the data connection to that client port number. In passive mode, the client connects from a random unprivileged port (N > 1023) to the FTP server's command port(default port 21). If the client needs to transfer data, the sever will tell the client:"hi, I opened port XXXX , please connect to me." and then client will initiate the data connection to that sever port number. In a nutshell, active mode is used to have the server connect to the client, and passive mode is used to have the client connect to the server. So if your FTP server is configured to work in active mode only or the firewalls between your client and the server are blocking the data port range, then you will get error message, to fix this issue, just set System.Net.FtpWebRequest property UsePassive = false. Hope this helps! Thanks for reading!

  Read the article

• FTP Connection established...Connection timed out problem with all my sites and FTP programs?

  - by janoChen

  Just few hours ago FileZilla was working fine. Then, suddenly I started to get this error: Status: Resolving address of ftp.readtypechinese.com Status: Connecting to 69.175.14.60:21... Status: Connection established, waiting for welcome message... Error: Connection timed out Error: Could not connect to server And it happens with all my sites: Status: Resolving address of edasich.dreamhost.com Status: Connecting to 173.236.223.223:21... Status: Connection established, waiting for welcome message... Error: Connection timed out Error: Could not connect to server I'm using FileZilla 3.5.0 and Ubuntu 11.10. Any suggestions to fix this? (I already tried Passive mode and it doesn't work). EDIT: Ocasionally, the log goes beyond the ...waiting for welcome message: Status: Connection established, waiting for welcome message... Response: 220 DreamHost FTP Server Command: USER aleche23 Error: Connection timed out Error: Could not connect to server But the connection gets timed out again. Weird...I just realized that I have the same problems with other FTP programs too: gFTP: Looking up ftp.readtypechinese.com Trying readtypechinese.com:21 Connected to readtypechinese.com:21 220 ProFTPD 1.3.2 Server (server) [69.175.14.60] USER [email protected] Connection to ftp.readtypechinese.com timed out

  Read the article

• android shut-down errors / thread problems

  - by iQue

  Im starting to deal with some stuff in my game that I thought were "minor problems" and one of these are that I get an error every time I shut down my game that looks like this: 09-05 21:40:58.320: E/AndroidRuntime(30401): FATAL EXCEPTION: Thread-4898 09-05 21:40:58.320: E/AndroidRuntime(30401): java.lang.NullPointerException 09-05 21:40:58.320: E/AndroidRuntime(30401): at nielsen.happy.shooter.MainGamePanel.render(MainGamePanel.java:94) 09-05 21:40:58.320: E/AndroidRuntime(30401): at nielsen.happy.shooter.MainThread.run(MainThread.java:101) on these lines is my GameViews rendering-method and the line in my Thread that calls my GameViews rendering-method. Im guessing Something in my surfaceDestroyed(SurfaceHolder holder) is wrong, or maybe Im not ending the tread in the right place. My surfaceDestroyed-method: public void surfaceDestroyed(SurfaceHolder holder) { Log.d(TAG, "Surface is being destroyed"); boolean retry = true; ((MainThread)thread).setRunning(false); while (retry) { try { ((MainThread)thread).join(); retry = false; } catch (InterruptedException e) { } } Log.d(TAG, "Thread was shut down cleanly"); } Also, In my activity for this View my onPaus, onDestoy and onStop are empty, do I maybe need to add something there? The crash occurs when I press my home-button on the phone, or any other button that makes the game stop. But as I understand it the onPaus is called when you press the Home-button.. This is really new territory for me so Im sorry if im missing something obvious or something really big. adding my surfaceCreated method asweel since that is where I start this thread: public void surfaceCreated(SurfaceHolder holder) { controls = new GameControls(this); setOnTouchListener(controls); timer1.schedule(new Task(this), 0, delay1); thread.setRunning(true); thread.start(); } and aslong as this is running, my game is rendering and updating.

  Read the article

< Previous Page | 8 9 10 11 12 13 14 15 16 17 18 19  | Next Page >