Search Results

Search found 30511 results on 1221 pages for 'linux networking'.

Page 12/1221 | < Previous Page | 8 9 10 11 12 13 14 15 16 17 18 19  | Next Page >

• Wired to wireless bridge in Linux

  - by adrianmcmenamin

  I am attempting to set up my Raspberry Pi as a bridge (but I think this is not a question specific to the hardware) - using Debian wheezy. I have a hostapd.conf: (some details changed for security)... interface=wlan0 bridge=br0 driver=nl80211 auth_algs=1 macaddr_acl=0 ignore_broadcast_ssid=0 logger_syslog=-1 logger_syslog_level=0 hw_mode=g ssid=MY_SSID channel=11 wep_default_key=0 wep_key0=MY_KEY wpa=0 (yes, I know WEP is no good) And this in /etc/network/interfaces auto lo iface lo inet loopback iface eth0 inet dhcp allow-hotplug wlan0 iface wlan0 inet manual wpa-roam /etc/wpa_supplicant/wpa_supplicant.conf iface default inet dhcp auto br0 iface br0 inet dhcp bridge-ports eth0 wlan0 Everything seems to come up ok, but I cannot associate with the bridged wireless connection - even though the flashing lights on the USB stick suggest packets are being exchanged. I have read somewhere that not all cards/devices will run in hostap mode - they won't pass packets in one direction: is that right? (The info was a bit old)- this my card: [ 3.663245] usb 1-1.3.1: new high-speed USB device number 5 using dwc_otg [ 3.794187] usb 1-1.3.1: New USB device found, idVendor=0cf3, idProduct=9271 [ 3.804321] usb 1-1.3.1: New USB device strings: Mfr=16, Product=32, SerialNumber=48 [ 3.816994] usb 1-1.3.1: Product: USB2.0 WLAN [ 3.823790] usb 1-1.3.1: Manufacturer: ATHEROS [ 3.830645] usb 1-1.3.1: SerialNumber: 12345 So, what have I got wrong here?

  Read the article

• Network on linux server is periodically down

  - by Fabian

  I have an old server running Fedora 4 that occasionally just stops responding via network for about an hour. This happens 1-2 times a week. Also no connection from the server itself to any other computer on the network is possible when it happens. The network settings and routes look fine. There are no unusual log messages and no unusual processes running at that time. If I restart the network or just do an ifconfig eth0 down & ifconfig eth0 up it works fine afterwards. I know that the server should be updated to a currently supported OS, but that is not really an easy option right now. Any ideas on how I could diagnose and fix that problem?

  Read the article

• Internal Linux machine with Apache that I can access by IP address but not computer name

  - by Parris

  I have an Ubuntu machine running LAMP. While on the machine I can type localhost or the computers name to access htdocs. From another machine I can only access the machine via its IP Address. This just started happening recently when someone rearranged the network cables and removed a hub sitting between the machine and the network, which makes me think it wasn't all the stable to begin with anyways. Any suggestions on where I should start looking?

  Read the article

• Configure linux machine as bridge/switch and end device

  - by leemes

  At my home, I have two desktop PCs in two rooms. The router / DSL modem is in one of these rooms. Now I want to configure a home server (having 2 LAN ports, running 24/7) in the corridor between the two rooms, using only one LAN cable at each door. This gives me the following physical configuration: (door) (door) .----/-/----. .-----/-/----------._ FritzBox | | | .----´´ DSL Router PC1 Server | PC2 As just said, the server has 2 network interfaces and is running Ubuntu. What I need now is a network configuration which enables both the server and PC1 to connect to the router. I think the server needs to serve as a bridge or switch. Currently, all computers are configured having static IP addresses. If I'm understanding it correctly, a bridge / switch doesn't have its own IP address, but as the server needs to be configured as an own end device, it needs to have one. My first question is, do I have to configure both interfaces separately, giving both the same static IP address? My next question is, how do I bridge the two physical networks into one? I have basic understanding (but am always confused again and again) of bridges and switches, but I don't know how to configure it in software. I only know that it's possible to do so :) The third question is: Is it possible to configure this in a way that network packets from/to PC1 to/from the router only go through hardware or only consume low CPU in the server? Can you help me? Thanks in advance!

  Read the article

• linux shutdown hang with wifi cifs mounts

  - by Sirex

  Since fedora 15 (and now with 16) it seems that wireless clients take a long while to shutdown when they have network filesystems mounted at shutdown time. I've pushed out a cifs mount via puppet, and all clients have it, including those on wireless. If say a laptop is on a wired connection it shuts down just fine, but if its on the wifi at the time (and no wired connection) it'll hang at the fedora f logo. I'm not sure if its indefinite or just a really long while, but ill give it a test when i shut this machine down in a second. Needless to say its pretty annoying, so is there a way of causing the machine to shutdown even if network connectivity has been lost at unmount time, -- or an official way to reorder events so the wireless card is kept up until after the unmount happens during the shut down process (short of writing a custom script for shutdowns which is a bit of a kludge) ? It does this on multiple machines, and all started doing it when we went from fedora 14 to 15. It was such an obvious issue i'd kind of assumed someone must have reported it or there was an easy fix, but i've not discovered anything yet. Additional info: I can confirm that manually unmounting the mounts then shutting down (sudo shutdown or the xfce shutdown button) will shutdown just fine, it only hangs if the mounts are still mounted The puppet config that sets the mount looks like this (now with the _netdev entry that is indeed pushed to clients successfully, but makes no difference): file { "/mnt/share": ensure = directory,} mount { "/mnt/share": atboot = true, ensure = mounted, remounts = false, fstype = cifs, device = "//srv/share", options = "user,gid=shareusers,uid=${user},file_mode=0700,dir_mode=0700,credentials=/root/.smbcreds,_netdev", require = [ File["/mnt/share"], Group["shareusers"] ], } }

  Read the article

• Linux live cd with Broadcom Wi-fi support

  - by paul simmons

  I am looking for a live distro that has out of the box Broadcom wireless support. I am pretty happy with my Ubuntu installation and as long as I have an ethernet connection first time installed, I can install Broadcom drivers over internet. But being a little paranoid, I make my secure operations (banking etc.) with a live cd and zero hard disk access, so nothing is recorded. So far I plug ethernet to do such things with the live cd, but it would be nice if I can do same thing with wireless.

  Read the article

• Linux foxboard network monitor

  - by het.oosten

  I want to use a Foxboard a simple network monitor for multiple routers (all routers are connected to the internet). Foxboard is a mini pc with an embedded version of Debian. My idea is to use multiple virtual network devices like this: eth0 192.168.2.10 eth0:1 192.168.3.10 eth0:2 192.168.4.10 I found a nice Python script to ping an external host here (the solution from Ryan Cox): http://stackoverflow.com/questions/316866/ping-a-site-in-python Is it possible to configure Debian to use eth0 when I ping www.site-a.com and eth0:1 when I ping www.site-b.com?

  Read the article

• OSS4 on Debian Squeeze

  - by mit

  Hi, I am trying to get OSS4 to work on a Debian Squeeze 64 bit machine with an usb sound adapter. There is no sound from this adapter at the present, although it worked just before on the previous installation. You can see the output of some commands here: $ sudo /etc/init.d/oss4-base restart Stopping Open Sound System: SNDCTL_MIX_EXTINFO: No such device or address done. Starting Open Sound System: done (OSS is already loaded). $ sudo /etc/init.d/oss4-base stop Stopping Open Sound System: SNDCTL_MIX_EXTINFO: No such device or address done. $ sudo /etc/init.d/oss4-base start Starting Open Sound System: done (OSS is already loaded). $ ossinfo Version info: OSS 4.2 (b 2002/201001250441) (0x00040100) GPL Platform: Linux/x86_64 2.6.32-5-xen-amd64 #1 SMP Fri Dec 10 17:41:50 UTC 2010 (pc11) Number of audio devices: 2 Number of audio engines: 2 Number of MIDI devices: 0 Number of mixer devices: 2 Device objects 0: osscore0 OSS core services 1: oss_hdaudio0 ATI HD Audio interrupts=0 (613) HD Audio controller ATI HD Audio Vendor ID 0x10024383 Subvendor ID 0x10192816 Codec 0: Not present 2: oss_usb0 USB audio core services 3: usb0d8c0126-0 USB sound device 4: usb0d8c0126-1 USB sound device 5: usb0d8c0126-2 USB sound device 6: usb0d8c0126-3 USB sound device MIDI devices (/dev/midi*) Mixer devices 0: (USB sound device )(Mixer 0 of device object 3) 1: USB sound device (Mixer 0 of device object 5) Audio devices (USB sound device play /dev/oss/usb0d8c0126-1/pcm0 ) (device index 0) USB sound device play /dev/oss/usb0d8c0126-3/pcm0 (device index 1) Nodes /dev/dsp -> /dev/oss/usb0d8c0126-1/pcm0 /dev/dsp_out -> /dev/oss/usb0d8c0126-1/pcm0 /dev/dsp_mmap -> /dev/oss/usb0d8c0126-1/pcm0 $ osstest Sound subsystem and version: OSS 4.2 (b 2002/201001250441) (0x00040100) Platform: Linux/x86_64 2.6.32-5-xen-amd64 #1 SMP Fri Dec 10 17:41:50 UTC 2010 *** Scanning sound adapter #-1 *** /dev/oss/usb0d8c0126-1/pcm0 (audio engine 0): USB sound device play - Device not present - Skipping *** Scanning sound adapter #-1 *** /dev/oss/usb0d8c0126-3/pcm0 (audio engine 1): USB sound device play - Performing audio playback test... /dev/oss/usb0d8c0126-3/pcm0: No such file or directory Can't open the device *** Some errors were detected during the tests *** $ ossxmix /dev/oss/usb0d8c0126-2/mix0: No such file or directory No mixers could be opened $ ossmix SNDCTL_MIX_EXTINFO: No such device or address ad@pc11:~$ man ossmix ad@pc11:~$ ossmix -a SNDCTL_MIX_EXTINFO: No such device or address ad@pc11:~$ man ossmix ad@pc11:~$ ossmix -D SNDCTL_MIX_EXTINFO: No such device or address ad@pc11:~$ ossmix -D 0 SNDCTL_MIX_EXTINFO: No such device or address ad@pc11:~$ man ossmix ad@pc11:~$ ossxmix /dev/oss/usb0d8c0126-2/mix0: No such file or directory No mixers could be opened How can I make oss sound work? I can add more information if necessary.

  Read the article

• Capturing network traffic on Linux

  - by Quandary

  Question: I have one Windows laptop, one Linux laptop and a wireless router. Now I want to "investigate" the hotmail/windows live protocol. What I want to do is route network traffic from the windows laptop via ethernet to the linux laptop, capture it on the Linux computer, forward it wirelessly to the router, receive the hotmail response from the router on the linux computer and forward it to the windows computer. How do I do that? In essence, switching the Linux laptop between the Windows laptop and the router, to capture network traffic ? Which program is best for capturing/analysing ? Please note that for whatever reason, packet capturing with winpcap on the windows computer doesn't work...

  Read the article

• Linux Virtualization Options on EC2

  - by recampbell

  I need to subdivide EC2 (or perhaps other cloud provider) instances. I know you cannot run a full virtualization stack on another. For instance a Xen guest cannot host a VirtualBox guest. So this means I am left with operating system-level virtualization. EC2 kernels are only publishable by select vendors, so you cannot upload the custom kernels required for OpenVZ or Vserver. For Linux, I think this leaves me with lxc (on Ubuntu 9.10), User Mode Linux, or qemu. I'm having a hard time finding comparisons between them. Performance is a concern, as is the ability to provide SMP to the guests. I would also like to use COW/sparse roots to reduce guest provisioning. My question is, what are the trade-offs between these options?

  Read the article

• Nothing happens when trying to upgrade from Linux Mint 12 to 13

  - by Ares

  I am trying to upgrade from Linux Mint 12 to 13 using apt-get. After running the following commands, nothing seems to happen. I am fairly new to linux, what am I doing wrong? user@olympus /etc/default $ sudo apt-get dist-upgrade Reading package lists... Done Building dependency tree Reading state information... Done Calculating upgrade... Done 0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded. user@olympus /etc/default $ sudo apt-get upgrade Reading package lists... Done Building dependency tree Reading state information... Done 0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded.

  Read the article

• Oracle Installation issue on Oracle Linux 6.4

  - by Pradhyoth

  I am trying to install Oracle 11g(11.2.0.1.0) on Oracle Linux 6.4(Remote Server). I get the following error(s) when Database Configuration Assistant is running ORA-01092: ORACLE instance terminated Disconnection forced ORA-48210: Relation Not Found Can someone help me regarding this errors, I cant seem to find what exactly that I have to do to solve this issue. I have done the same install on Oracle Linux 5.7 but never faced this issue before. The only problem while installing(which happens on 5.7 too) is that the required packages fail, but upon checking, it seems much higher versions are already installed. Also I cant do a yum update because the system seems to have connectivity issues with public-yum.oracle.com as I cant ping it(even though the IP Address gets resolved)

  Read the article

• Implementing a Linux-HA based clustering setup on Windows

  - by Alex

  I have a (tried and tested) setup involving: 2x Load balancing nodes on a floating IP via Heartbeat, load balancing 2 tomcat servers. 2x Tomcat servers 2x Galera Cluster MySQL servers synchronously replicating (+1 arbitrator node) All are evenly spread across 2 physical nodes. Now, I have to somehow get the same functionality on Windows Server (2008? I think) nodes .... running under Xen virtualization. There is no possibility to use Linux for any of the nodes. I count two main problems: No Linux-HA hearbeat daemon for the load balancing No Galera synchronous replication for MySQL I freely admit to having nearly no Windows knowledge when it comes to clustering. Is there a way to closely mimic the setup I have described or is it a total write-off?

  Read the article

• Mainstream Linux on 1GB HDD

  - by Ariel Nundi

  Hi, I've decided to start learning Linux + Ryby + RoR. The problem is the only personal computer I have is a laptop with 1GB flash card and I can't afford to buy more hardware right now. The laptop has dual core CPU and 2GB of RAM. Can you recommend a Linux distribution I can install? I've tried the netbook version of Ubuntu, but install failed because of lack of space. I'd prefer a more popular distribution, so I can use my skills say on a job. TIA

  Read the article

• Weird video problem with Linux variants

  - by alex

  I decided recently I wanted to give Linux a go so I first download a Ubuntu boot CD. The boot menu came up fine, and then a glowing Ubuntu logo was in the middle of the screen for a while. Then the screen was flickering orange and black. I guess this is where the GUI should of came up. Pushing Ctrl+Alt+F1 brought me to the command prompt OK. I thought this may have something to do with Ubuntu, so I downloaded Linux Mint. The same sort of thing happened. It booted fine, displayed it's logo for a while and then flickered, only green and black this time. Does this sound like a video card problem? How can I resolve this? Many thanks

  Read the article

• pip install fails on guest Linux Mint 15

  - by synergetic

  On my Windows 7 PC, I installed VMware VM for Linux Mint 15. Windows PC is behind corporate firewall /proxy server. Now inside Linux I issued: sudo apt-get install python-virtualenv Then created ~/projects folder and python virtual environment: mkdir projects cd projects virtualenv venv Then activated my virtual env: . venv/bin/activate So far no problem. Then tried to install python libraries, for example markupsafe: pip install markupsafe It throws an error: Cannot fetch index base URL https://pypi.python.org/simple/ Could not find any downloads that satisfy the requirement markupsafe No distributions at all found for markupsafe Storing complete log in /home/me/.pip/pip.log Inside pip.log I found: <urlopen error [Errno 104] Connection reset by peer> Installing any other library throws similar error. What's wrong here?

  Read the article

• Leightweight Linux distro to install on my old PC

  - by Juri

  Hi, I have an old PC at home which is mainly used by my Mom or my brother just to browse the web and maybe open some PDFs / docs. Till now I had Win2000 installed, but it performs very poorly. So I thought about installing Linux on it. Could someone give me some suggestions for a leightweight Linux distribution which works well?? Is standard Ubuntu too heavy?? PC details CPU: Athlon AMD ~1211 MHz RAM: 1GB Grafics Card: NVidia GeForce FX 5200 (not so relevant,but still) Thx for your suggestions.

  Read the article

• would unexpected power cuts harm the Linux OS?

  - by Johan Elmander

  I am developing an application on a Linux embedded board (runs Debian) e.g. Raspberry Pi, Beagle Board/Bone, or olimex. The boards works on an environment that the electricity is cut unexpectedly (it is far complicated to place PSU, etc.) and it would happen every day couple times. I wonder if the unexpected power cuts would cause crash/problem on the Linux Operation System? If it is something that I should worry, what would you suggest to prevent the damages on OS against the unexpected power cuts? PS. The application needs to writes some data to the storage medium (SD card), I think it would not be suitable to mount it as read-only.

  Read the article

• Error installing Arch Linux

  - by Garethj94

  So, I am trying to install Arch Linux on my Acer Aspire 4830tg, but I keep running into problems. Some background knowledge, I am trying to install Arch off a usb stick and I got the iso image using bittorrent. I am also trying to install it alongside of Windows 8 (which is already installed). So when I boot into Arch linux I get this error: :: Mounting '/dev/disk/by-label/ARCH_201212' to 'run/archiso/bootmnt' Waiting 30 seconds for device /dev/disk/by-label/ARCH_201212 ... ERROR: '/dev/disk/by-label/ARCH_201212' device did not show up after 30 seconds... Falling back to interactive prompt You can try to fix the problem manually, log out when you are finished sh: can't access tty; job control turned off I know that it will work if I run it on a virtual machine but whenever I try to install it on my laptop I keep getting this error. And since you can't register for the Arch forums without a Arch terminal to run their captcha command I can't ask this on their forums.

  Read the article

• Linux Mint does not start after renaming home directory

  - by RUBY

  I am new to linux and was just trying to rename the only directory in home from rk to rhk. I messed up the whole thing and the settings. Created some new thing named rhk which I can't remember as it got all messed up and Now I am getting nothing after Linux Mint 10(julia) boots up - no start menu, no panel, no taskbar nothing. I tried to work in the recovery mode and got some(downloaded) 216mb of something(in the repair broken packages) hoping that it might help but didn't help. Moreover whenver I have booted in it shows messages like Could not update ICEauthority file /home/rk./.ICEauthority there is a problem with the configuration server. (usr/lib/libconfig24/gconfsanitycheck2 exited with status 256) The panel encountered a problem while loading "OAFIID: GNOME_mintMenu" The panel encountered a problem while loading "OAFIID: GNOME_IndicatorApplet" Naulitis could not create the following reqiured folders: /home/rk/Desktop, /home/rk/. Naulitis Moreover Alt+F2 gives Run application or run with file and nothing seems to be working.

  Read the article

• Easy Linux distribution with newer packages than Ubuntu?

  - by sweetiecakes

  I'm a programmer and sysadmin, and I'm looking for a better Linux distro to use than Ubuntu. It certainly is a well-polished, nice distribution to use, but a lot of the programs available in the Ubuntu repositories are very old versions. Installing PPA's or compiling from source just isn't very nice. I'd love to use something like Arch Linux that uses a rolling release cycle, but I really don't want to configure my system from scratch, and support for ATI Catalyst drivers is necessary. I just want to pop the CD in, install and start using my computer - just like with Ubuntu. Additionally, if you know of a package like ubuntu-restricted-extras for the distribution, that'd be nice! What do you suggest?

  Read the article

• Linux webserver tutorials (WordPress)

  - by HannesFostie

  Hi I will be setting up a linux webserver to host WordPress on. The problem is that although I know how to do it, I don't know how to properly do it. So I'm now looking for semi-advanced tutorials that are complete and secure above anything else. I don't really mind trying a new distro, but I prefer ubuntu/debian. I read this post: Any good resources for setting up a webserver in Linux ? But these are very limited. So far not a lot of luck finding good guides and howtos. This should probably be a community wiki but I can't seem to transform it myself. Thanks

  Read the article

• mini linux for browsing media playing

  - by Martin Beckett

  I'm looking for a small linux install (<100Mb) that can just run a browser and ideally a media player. It's to fit in a spare recovery partition on my laptop and be a quick boot for non-work stuff when I'm on the road. I have used Puppy-linux and DSL before but they have lots of stuff I don't need. Is there something like these that just concentrates on running a browser in the way xbmc does for videos? ps. The size requirement was to fit in the existing 100Mb win7 recovery partition, but that can be resized. The main idea was something that booted very quickly without the 10min wait while windows does all the corporate stuff and realizes it isn't on the LAN - and could be shutdown instantly.

  Read the article

• Can unexpected power loss harm a Linux install?

  - by Johan Elmander

  I am developing an application on a Linux embedded board (runs Debian) e.g. Raspberry Pi, Beagle Board/Bone, or olimex. The boards works on an environment that the electricity is cut unexpectedly (it is far complicated to place PSU, etc.) and it would happen every day couple times. I wonder if the unexpected power cuts would cause crash/problem on the Linux Operation System? If it is something that I should worry, what would you suggest to prevent the damages on OS against the unexpected power cuts? PS. The application needs to writes some data to the storage medium (SD card), I think it would not be suitable to mount it as read-only.

  Read the article

• Skype Linux similar to Windows Linux

  - by vsecades

  Does anybody know a good option of a Skype based solution that works on Linux? I have a problem, real problem with the current Linux version as it is a crappy, buggy and downgraded version of the Windows equivalent... Help?

  Read the article

< Previous Page | 8 9 10 11 12 13 14 15 16 17 18 19  | Next Page >