Search Results

Search found 753 results on 31 pages for 'noise'.

Page 12/31 | < Previous Page | 8 9 10 11 12 13 14 15 16 17 18 19  | Next Page >

  • Audio problems with Windows 7 running through Bootcamp

    - by cust0s
    I've been using (and enjoy using) Windows 7 through bootcamp on my mac for some time now. The only problem I've been having is with the audio, I seem to get a low hissing noise which is more prevalent when wearing headphones. Whilst it's not stopping me from using Windows 7 it's something I'd like fixed. I've tried downloading the latest drivers from Realteks website, but to no avail. Any suggestions?

    Read the article

  • PSU failing or Mainboard failing?

    - by Andrei Rinea
    I am having some troubles lately powering on my desktop workstation. While starting up the PC after being off for hours (usually at least 8 hours) it randomly fails to do so. What happens is that : I press the power button; nothing happens I can hear a moderate buzzing noise at the back of the PC (near the PSU); but I can't say for sure that it's not from the mainboard. If I insist pressing the power button a few times in 1-2 minutes it'll start Another route would be that instead of (3) I will plug off the power cable from the PSU and wait for 30 seconds. Then I will press the power on and keep it for 30-60 seconds (I had some success at notebooks with a similar approach). Then I will plug back the cable in the PSU, press only once the power button and it will start normally. Also while running normally I keep hearing some low buzzing which seems to be fan-RPM-related (i.e. when processing images or doing CPU intensive work). What should I look into? UPDATE It's getting worse. It took more than 10 retries today and almost 20 minutes to start the computer. I tried the paperclip trick and the PSU behaves perfectly. I managed to start the computer like so : I pressed the on-button a few times and then left the PC in a pre-startup state (the fans were working the buzzing noise was strong and I went to eat. I thought I won't lit the house on fire so fast and without smelling. Back, after 10-15 min the computer booted up! Discussed with a fellow at Intel and he told me the capacitors on the mainboard are probably a bit shot. If they are shot, he said, it should start up warm perfectly. So I did restart it, warm, a few times (5 sec cooldown and then 40 sec cooldown and it started up perfectly). I can either replace the capacitors on the mainboard (doesn't sound worth it or replace the mainboard (this one sucks too :)) ) FINAL INFO : It was the PSU after all. Although it was powering the IDEs and SATAs the Mainboard power module was failing. I bought another mainboard just to find out that this wasn't the cause. Now I'll have to return it somehow. The spare PSU is now in the computer and doing well.. Although larger (500W), it's like a plane taking off.. I need a better one.

    Read the article

  • Annoying sound from microphone in headphone

    - by Paul
    I recently bought a Plantronics bluetooth headset for VOIP in Skype. But I am facing an annoying problem. The microphone is really sensitive and I could hear all the background noises and my sound though the headphone (of blutooth headset). I tried to disable the bluetooth headset in Playback devices and I could hear the amplified background noise through speakers! I checked if there is a microphone boost option enabled, but couldn't find it in the properties of the headset recording device

    Read the article

  • speakers muted automatically for some reason

    - by Or A
    i have this weird problem that i'm not sure is specific to me, but more of a windows 7 or Lenovo laptop, so any help would be appreciable. the problem is as follows: Whenever i use skype, msn or any other thing that make noise, the speakers are muted automatically and i need to press the mute/unmute button to re-enable the sound. Does anyone know what can i do to disable windows 7 from doing it? Thanks.

    Read the article

  • Control diamond square algorithm to generate islands/pangea.

    - by Gabriel A. Zorrilla
    I generated a height map with the diamond square algorithm. The thing is i do not manage to create islands, this is, restrict the height other than water level range to a certain value in the center of the map. I manualy seeded a circle in the middle of the map but the rest of the map still receives heights over the water level. I dont fully understand the Perlin noise algorithm so i'd like to work with my current implementation of the diamond square algorithm which took me 3 days to interpret and code in PHP. :P

    Read the article

  • Map Generation Algorithms for Minecraft Clone

    - by Danjen
    I'm making a Minecraft clone for the sake of it (with some inspriation from Dwarf Fortress) and had a few questions about the way the world generation is handled. Things I want it to cover: Biomes such as hills, mountains, forests, etc. Caves/caverns/tunnels Procedural (so it stretches to infinity... is wrap-around a possibility?) Breaking the map into smaller chunks Moddable (ie, new terrain types) Multiplayer compatible In particular, I've seen things such as Perlin Noise, Heightmaps, and Marching Cubes thrown around. These are like different tools to use, but I don't know when or why I would use them. Are there any other techniques that are useful for map generation? I realize this is borderline subjective and open-ended, but I am looking for some more insight into the processes involved.

    Read the article

  • Week in Geek: Google Asks for Kids’ Social Security Numbers Edition

    - by Asian Angel
    This week we learned how to make hundreds of complex photo edits in seconds with Photoshop actions, use an Android Phone as a modem with no rooting required, install a wireless card in Linux using Windows drivers, change Ubuntu’s window borders with Emerald, how noise reducing headphones work, and more. Photo by Julian Fong. Latest Features How-To Geek ETC Should You Delete Windows 7 Service Pack Backup Files to Save Space? What Can Super Mario Teach Us About Graphics Technology? Windows 7 Service Pack 1 is Released: But Should You Install It? How To Make Hundreds of Complex Photo Edits in Seconds With Photoshop Actions How to Enable User-Specific Wireless Networks in Windows 7 How to Use Google Chrome as Your Default PDF Reader (the Easy Way) Preliminary List of Keyboard Shortcuts for Unity Now Available Bring a Touch of the Wild West to Your Desktop with the Rango Theme for Windows 7 Manage Your Favorite Social Accounts in Chrome and Iron with Seesmic E.T. II – Extinction [Fake Movie Sequel Video] Remastered King’s Quest Games Offer Classic Gaming on Modern Machines Compare Your Internet Cost and Speed to Global Averages [Infographic]

    Read the article

  • Implementing algorithms via compute shaders vs. pipeline shaders

    - by TravisG
    With the availability of compute shaders for both DirectX and OpenGL it's now possible to implement many algorithms without going through the rasterization pipeline and instead use general purpose computing on the GPU to solve the problem. For some algorithms this seems to become the intuitive canonical solution because they're inherently not rasterization based, and rasterization-based shaders seemed to be a workaround to harness GPU power (simple example: creating a noise texture. No quad needs to be rasterized here). Given an algorithm that can be implemented both ways, are there general (potential) performance benefits over using compute shaders vs. going the normal route? Are there drawbacks that we should watch out for (for example, is there some kind of unusual overhead to switching from/to compute shaders at runtime)? Are there perhaps other benefits or drawbacks to consider when choosing between the two?

    Read the article

  • Use Evernote’s Secret Debug Menu to Optimize and Speed Up Searching

    - by The Geek
    If your Evernote installation has become sluggish after adding thousands of notes, you might be able to speed it up a bit with this great tip from Matthew’s TechInch blog that uncovers a secret debug menu in the latest Windows client. It’s important to note that Evernote runs database optimization in the background automatically, so this really shouldn’t be necessary, but if your database is sluggish, anything is worth a shot, right Latest Features How-To Geek ETC How to Upgrade Windows 7 Easily (And Understand Whether You Should) The How-To Geek Guide to Audio Editing: Basic Noise Removal Install a Wii Game Loader for Easy Backups and Fast Load Times The Best of CES (Consumer Electronics Show) in 2011 The Worst of CES (Consumer Electronics Show) in 2011 HTG Projects: How to Create Your Own Custom Papercraft Toy Firefox 4.0 Beta 9 Available for Download – Get Your Copy Now The Frustrations of a Computer Literate Watching a Newbie Use a Computer [Humorous Video] Season0nPass Jailbreaks Current Gen Apple TVs IBM’s Jeopardy Playing Computer Watson Shows The Pros How It’s Done [Video] Tranquil Juice Drop Abstract Wallpaper Pulse Is a Sleek Newsreader for iOS and Android Devices

    Read the article

  • The purpose of using a constants pool for immutable constants

    - by patstuart
    Originally posted at stackoverflow.com/q/23961260 I come across the following code with a lot of frequency: if (myArray.length == Constants.ZERO_INT) or if (myString != null && !myString.equals(Constants.EMPTY_STRING)) Neither of these makes much sense to me. Isn't the point of having a constant pool for ease of code appearance and to allow for modularity? In both of the above cases, it just looks like needless noise that accomplishes neither objective. My question: what is the purpose of using a constants pool for variables like this which will never change? Or is this just cargo cult programming? If so, then why does it seem to be prevalent in the industry? (I've noticed it with at least two different employers I've worked with).

    Read the article

  • How does ecryptfs impact harddisk performance?

    - by Freddi
    I have my home directy encrypted with ecryptfs. Does ecryptfs lead to fragmentation? I have the feeling that reading files, displaying folders and login became continuously slower and slower (although it was not noticeably slow at the beginning). The hard disk makes a lot of seek noise even if I open only a text file. In /home/.ecryptfs I see many big archives (that probably contain the encrypted files), so I'm wondering if Linux file system online defragmentation gains anything here. What options do I have to increase performance? Should I decide whether I maybe better do without encryption?

    Read the article

  • higher cpu usage in ubuntu 12.04 than windows 7

    - by Medya
    Hi I have a Intel Core i5 with 6GB of Ram using ubuntu 12.04 64bit. I noticed that whenever I run chrome which is the faster browser for me in linux) when I watch youtube, the CPU usage for Chrome is at least 13% and sometimes even 30% . but in Windows 7 same thing (youtube on chrome) rarely uses more than 6% of my CPU usage. I also notice my laptop is so hot in ubuntu 12.04 and the fan is working all the time, while in windows the laptop is so silent and the fan doesnt make much noise all the time and not as warm as in linux. is it like that for every one or is it just me?

    Read the article

  • Wireless iwconfig rate auto too low

    - by Jamie Kitson
    Hi, left to its own devices my wireless connects at too low a speed. I have a 20meg internet connection and my wireless is slowing it down to like 3meg. When I reboot into windows it's fine. When I run iwconfig eth1 rate 24M or even 48M the connection is much faster and runs fine, why won't it automatically go higher? Is this the fault of the driver? I am running Broadcom's driver compiled from source. Would adding iwconfig eth1 rate 24M to rc.local be the right way to force it at boot? Output from iwconfig when rate=auto: eth1 IEEE 802.11 ESSID:"honeypot" Mode:Managed Frequency:2.417 GHz Access Point: xxx Bit Rate=1 Mb/s Tx-Power:24 dBm Retry min limit:7 RTS thr:off Fragment thr:off Encryption key:off Power Management:off Link Quality=5/5 Signal level=-47 dBm Noise level=-91 dBm Rx invalid nwid:0 Rx invalid crypt:2 Rx invalid frag:0 Tx excessive retries:0 Invalid misc:0 Missed beacon:0 Thanks, Jamie

    Read the article

  • DVD not detected?

    - by Benjamin
    As i insert a DVD in my drive (on a laptop) using Kubuntu 12.04, the DVD is not detected. The drive takes the DVD, I can hear it munching on it for a while, and then nothing. Even ejecting the DVD becomes a hassle, I need to do that at boot time otherwise the OS won't allow me to eject. Kubuntu 12.04 used to read and mount the same DVDs just fine a week ago. Edit: since I am able to boot from CD, can I safely assume the issue is not a hardware issue? How can I fix this? wodim --devices returns: wodim: Overview of accessible drives (1 found) : ------------------------------------------------------------------------- 0 dev='/dev/sg1' rwrw-- : 'Optiarc' 'DVD+-RW AD-7640A' ------------------------------------------------------------------------- sudo lshw -class disk returns: *-cdrom description: DVD-RAM writer product: DVD+-RW AD-7640A vendor: Optiarc physical id: 0.0.0 bus info: scsi@3:0.0.0 logical name: /dev/cdrom2 logical name: /dev/cdrw2 logical name: /dev/dvd2 logical name: /dev/dvdrw2 logical name: /dev/sr0 version: JD06 capabilities: removable audio cd-r cd-rw dvd dvd-r dvd-ram configuration: ansiversion=5 status=open lspci returns: 00:00.0 Host bridge: Intel Corporation Mobile PM965/GM965/GL960 Memory Controller Hub (rev 0c) 00:02.0 VGA compatible controller: Intel Corporation Mobile GM965/GL960 Integrated Graphics Controller (primary) (rev 0c) 00:02.1 Display controller: Intel Corporation Mobile GM965/GL960 Integrated Graphics Controller (secondary) (rev 0c) 00:1a.0 USB controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #4 (rev 03) 00:1a.1 USB controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #5 (rev 03) 00:1a.7 USB controller: Intel Corporation 82801H (ICH8 Family) USB2 EHCI Controller #2 (rev 03) 00:1b.0 Audio device: Intel Corporation 82801H (ICH8 Family) HD Audio Controller (rev 03) 00:1c.0 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 1 (rev 03) 00:1c.1 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 2 (rev 03) 00:1c.3 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 4 (rev 03) 00:1c.4 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 5 (rev 03) 00:1d.0 USB controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #1 (rev 03) 00:1d.1 USB controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #2 (rev 03) 00:1d.2 USB controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #3 (rev 03) 00:1d.7 USB controller: Intel Corporation 82801H (ICH8 Family) USB2 EHCI Controller #1 (rev 03) 00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev f3) 00:1f.0 ISA bridge: Intel Corporation 82801HM (ICH8M) LPC Interface Controller (rev 03) 00:1f.1 IDE interface: Intel Corporation 82801HM/HEM (ICH8M/ICH8M-E) IDE Controller (rev 03) 00:1f.2 SATA controller: Intel Corporation 82801HM/HEM (ICH8M/ICH8M-E) SATA Controller [AHCI mode] (rev 03) 00:1f.3 SMBus: Intel Corporation 82801H (ICH8 Family) SMBus Controller (rev 03) 06:00.0 Network controller: Broadcom Corporation BCM4312 802.11b/g LP-PHY (rev 01) 07:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 02) 08:05.0 FireWire (IEEE 1394): O2 Micro, Inc. Firewire (IEEE 1394) (rev 02) 08:05.2 SD Host controller: O2 Micro, Inc. Integrated MMC/SD Controller (rev 02) 08:05.3 Mass storage controller: O2 Micro, Inc. Integrated MS/xD Controller (rev 01) and lsusb: Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 001 Device 003: ID 0c45:63e0 Microdia Sonix Integrated Webcam Bus 003 Device 002: ID 0483:2016 SGS Thomson Microelectronics Fingerprint Reader The /etc/modprobe.d/blacklist.conf contains: # This file lists those modules which we don't want to be loaded by # alias expansion, usually so some other driver will be loaded for the # device instead. # evbug is a debug tool that should be loaded explicitly blacklist evbug # these drivers are very simple, the HID drivers are usually preferred blacklist usbmouse blacklist usbkbd # replaced by e100 blacklist eepro100 # replaced by tulip blacklist de4x5 # causes no end of confusion by creating unexpected network interfaces blacklist eth1394 # snd_intel8x0m can interfere with snd_intel8x0, doesn't seem to support much # hardware on its own (Ubuntu bug #2011, #6810) blacklist snd_intel8x0m # Conflicts with dvb driver (which is better for handling this device) blacklist snd_aw2 # causes failure to suspend on HP compaq nc6000 (Ubuntu: #10306) blacklist i2c_i801 # replaced by p54pci blacklist prism54 # replaced by b43 and ssb. blacklist bcm43xx # most apps now use garmin usb driver directly (Ubuntu: #114565) blacklist garmin_gps # replaced by asus-laptop (Ubuntu: #184721) blacklist asus_acpi # low-quality, just noise when being used for sound playback, causes # hangs at desktop session start (Ubuntu: #246969) blacklist snd_pcsp # ugly and loud noise, getting on everyone's nerves; this should be done by a # nice pulseaudio bing (Ubuntu: #77010) blacklist pcspkr # EDAC driver for amd76x clashes with the agp driver preventing the aperture # from being initialised (Ubuntu: #297750). Blacklist so that the driver # continues to build and is installable for the few cases where its # really needed. blacklist amd76x_edac

    Read the article

  • Friday Fun: Splash Back

    - by Asian Angel
    The best part of the week has finally arrived, so why not take a few minutes to have some quick fun? In this week’s game you get to play with alien goo as you work to clear the game board and reach as high a level as possible Latest Features How-To Geek ETC How to Upgrade Windows 7 Easily (And Understand Whether You Should) The How-To Geek Guide to Audio Editing: Basic Noise Removal Install a Wii Game Loader for Easy Backups and Fast Load Times The Best of CES (Consumer Electronics Show) in 2011 The Worst of CES (Consumer Electronics Show) in 2011 HTG Projects: How to Create Your Own Custom Papercraft Toy Calvin and Hobbes Mix It Up in this Fight Club Parody [Video] Choose from 124 Awesome HTML5 Games to Play at Mozilla Labs Game On Gallery Google Translate for Android Updates to Include Conversation Mode and More Move Your Photoshop Scratch Disk for Improved Performance Winter Storm Clouds on the Horizon Wallpaper Existential Angry Birds [Video]

    Read the article

  • GWB | Administrator Blog Is Back To Life

    - by Jeff Julian
    We are bringing back the administrator’s blog for Geekswithblogs.net as a place to get information for what is going on with GWB. Couple reasons we are doing this. One, I post a lot of information on my blog that is not Geekswithblogs.net related. Most the time it isn’t even developer related and I know I need to work on that too, but in an effort to keep the signal much higher than the noise, we are moving the information over there. The blog URL is http://geekswithblogs.net/administrator. The other reason we are doing it is I am not the only member of the GWB staff. So please subscribe to that blog and let us know what you think about Geekswithblogs.net and how we can make the site better.http://geekswithblogs.net/administrator

    Read the article

  • What changed with timidity, alsa and jack in 11.10?

    - by Dave
    I (just) upgraded from 11.4 to 11.10 and noticed some differences in the behavior of timidity. I used to (11.4) exectute >timidity midifile.midi without running jackd, and thus using alsa (or pulseaudio?) to produce sound from midi files. Now having upgraded, this does not work -- currently this command just freezes if jack is not running. If jack is running, it does work but there is an initial audio glitch (noise burst at the start of playback, analogous to the sound of a plug being inserted) that I'd rather not have to deal with. All the indications that I have is that in 11.10 timidity will only work (albeit glitchy) with jack on, whereas in 11.4 it did not require this. Is there any way to restore timidity's non-jack operation in 11.10? Is there a way to get rid of the audio glitch in with jack operation? Overall, what underlying changes in these programs and the audio infrastructure are behind this?

    Read the article

  • Are 'edited by' inline comments the norm in shops which use revision control?

    - by Joshua Smith
    The senior dev in our shop insists that whenever code is modified, the programmer responsible should add an inline comment stating what he did. These comments usually look like // YYYY-MM-DD <User ID> Added this IF block per bug 1234. We use TFS for revision control, and it seems to me that comments of this sort are much more appropriate as check-in notes rather than inline noise. TFS even allows you to associate a check-in with one or more bugs. Some of our older, often-modified class files look like they have a comment-to-LOC ratio approaching 1:1. To my eyes, these comments make the code harder to read and add zero value. Is this a standard (or at least common) practice in other shops?

    Read the article

  • Calculating adjacent quads on a quad sphere

    - by Caius Eugene
    I've been experimenting with generating a quad sphere. This sphere subdivides into a quadtree structure. Eventually I'm going to be applying some simplex noise to the vertices of each face to create a terrain like surface. To solve the issue of cracks I want to be able to apply a geomitmap technique of triangle fanning on the edges of each quad, but in order to know the subdivision level of the adjacent quads I need to identify which quads are adjacent to each other. Does anyone know any approaches to computing and storing these adjacent quads for quick lookup? Also It's important that I know which direction they are in so I can easily adjust the correct edge.

    Read the article

  • Deterministic replay in a modern game

    - by cloudraven
    I am doing a study in modern games graphics, and as part of the study it would be really helpful to be able to replay a sequence in the game multiple times. For example, recording a series of inputs to get the exact video sequences, but being able to replay them in different computers or different graphics configurations. I want to do this study with a couple of existing commercial games with sophisticated graphics (something released in the last 1 or 2 years if possible). I was thinking on hooking with detours or something similar, calls to time() or srand() to fix all pseudo-number generated results. It would be ideal to have a general solution that works with any game. Since admittedly that is pretty ambitious, I would be happy just having 2 or 3 games in which it is known that I can get deterministic output for a given input. In the end, I will be comparing video output, so I want to avoid noise generated by differences on each execution caused by non-determinism. Any sugestions?

    Read the article

  • Star Trail Photos Taken from the International Space Station

    - by Jason Fitzpatrick
    While most people have seen a star trail photo or two, seeing a set of star trail photos taken from over 300 miles above the Earth’s surface is a treat. Courtesy of Astronaut and Expedition 31 Flight Engineer Don Pettit, the photos capture star trails from the vantage point of the International Space Station. He explains his technique: My star trail images are made by taking a time exposure of about 10 to 15 minutes. However, with modern digital cameras, 30 seconds is about the longest exposure possible, due to electronic detector noise effectively snowing out the image. To achieve the longer exposures I do what many amateur astronomers do. I take multiple 30-second exposures, then ‘stack’ them using imaging software, thus producing the longer exposure. Hit up the link below for the full Flickr set of the star trails. ISS Star Trails [via Smithsonian Magazine] HTG Explains: What Is RSS and How Can I Benefit From Using It? HTG Explains: Why You Only Have to Wipe a Disk Once to Erase It HTG Explains: Learn How Websites Are Tracking You Online

    Read the article

  • Internal Mic Ubuntu 12.04 on Compaq Presario CQ50

    - by Genius FDE
    I have problem with the internal microphone not working on Ubuntu 12.04. It looks like a common problem on most of the laptops running ubuntu 12.04. I tried a lot of possible solutions available online but nothing seems to work! sudo aplay -l gives: **** List of PLAYBACK Hardware Devices **** card 0: NVidia [HDA NVidia], device 0: CONEXANT Analog [CONEXANT Analog] Subdevices: 1/1 Subdevice #0: subdevice #0 card 0: NVidia [HDA NVidia], device 3: HDMI 0 [HDMI 0] Subdevices: 1/1 Subdevice #0: subdevice #0 By the way, the Laptop has no HDMI port! I've seen the same problem with Sony laptop but the mic was working with too much static noise. Thank you.

    Read the article

  • 2 google analytics profiles for 2 sections of the same site

    - by sam
    Ive got a website which for the most part is a portfolio, there is another section of the site mysite.com/micro-site which ranks extremely well for it chosen term / topic, and brings in lots of traffic, but actually has little to do with the core business. It was really made as a piece of content - in the same way sites like this are - http://chrome.com/campaigns/rollit For the main site i use 1 Google analytics profile and set of tags, for the micro site i have a completely different analytics profile and set of tags. The main reason ive done this is because the traffic stats and insights for the micro site are essentially just noise, its nice to have the traffic but they dont help when reading analytics reports, so if they were combined my analytics reports would be a mess. Is there any disadvantage / negatives of doing this ?

    Read the article

  • Reflections from the Young Prisms

    - by Oracle OpenWorld Blog Team
     By Karen Shamban The Young Prisms began their musical journey in San Francisco, and it's here they return to bring their unique sound to the Oracle OpenWorld Music Festival.  We asked them to tell us their thoughts on music, performing, and what they like in an audience.  Here's what they had to say: Q. What do you like best about performing in front of a live audience?A. There are a lot of things to love about playing in front of people. The best part is definitely the nights when the energy the audience brings shows through. Although it always differs from city to city and person to person, when you play to a full house and people are really getting into it, it's like no other feeling.Q. How do you use technology in creating and delivering your music?A. Well, we actually use a lot more electronic components than people realize. Pretty much every string instrument played either live or on recording has been filtered through numerous electronic effects. Matt uses somewhere around 12 or 14 every time we play live. Giovanni has six. Most of our writing and demoing is done with drum sequencers and samplers too, so it's safe to say we use technology to our advantage in the writing process. Live is a bit different, since we keep it to the basics with guitars and acoustic drums. We also tend to use projections when we play live, so technology helps us do that fairly easily as well.Q. Do you prefer smaller, intimate venues or larger, louder ones?  Why?A. Couldn’t say we have a real preference in venue size. I mean, its always great to get to play through a massive killer sound system, but small venues when packed full are equally as special if not more so, because of the intimacy of it. Some of my favorite shows I've seen as an audience member/ fan have been at the smaller venues in San Francisco.Q. What about your fans surprises you?A. Sometimes the older guys are a surprise. We've played shows where there are more older guys in their 40s and 50s, who come and stare and take notes at our effects pedals. Then there are kids our age or in their 20s. Sometimes it's surprising to think that the older guys relate to what we're doing more than our peers and friends in our age group.Q. What about your live act surprises your fans?A. I think people are often surprised by how shy we can be. It feels like people expect us to be really rowdy and throw things and make really loud noises and get really aggressive on stage because some of the sounds we use can have an abrasive element to them. People expect Matt to have some kind of Kurt Cobain attitude, which he doesn’t at all. So it seems it surprises people to see musicians playing loud and noisy songs in their early and mid 20s being fairly tame and calm on stage.Q. There are going to be a lot of technical people (you could call them geeks) in the Oracle crowd -- what are they going to love about your performance?A. Hopefully most of them are pedal nerds like we are and like the previously mentioned “older dude crowd.” Besides that I hope they’d be into the projections and group of songs we're going to play for them.Q. What's new and different in the music you're making today, versus a year or two ago?A. I'd say there is more focus on the songwriting now and less of the noise today than last year. I think it's pretty evident on the new record compared to the last two. On the first two records we made as YP, we had another guitar player and songwriter who no longer plays with us. So the process in which we develop songs is different as well.Q. Have you been on tour recently? If so, what do you like about touring, and what do you dislike?A. Touring is amazing. Some people might tell you different if they've been doing it for what they'd call too long, but for us it's really a great chance to play for people who care about the music we're making and also to see and explore the world. Getting to visit so many different cities and explore so many different cultures is amazing. Of course we love getting into cultural foods too. Stefanie is a fashion geek so getting to go to New York as often as we do as well as getting to play in London and Paris is always especially fun for her.Q. Ever think about playing another kind of music? If so, what, and why?A. Never really thought about wanting to do anything drastically different. I think the style of music we play has a lot to do with the stuff we have been listening to both growing up and now. It wasn’t really a conscious decision to make sure it was a certain sound, so I'm not sure we've ever thought about doing a way different genre or whatever like electronic music or country. Although there have been times we've had conversations where we discuss possibly doing quiet sets or using the string synth sounds.Q. What are the top three things people should know about your music?A1. We like noise.A2. We use ambience and atmosphere as much as as we can.A3. Yes, the vocals are supposed to be mixed in with the guitars. Get more info: Oracle OpenWorld Music Festival Young Prisms

    Read the article

< Previous Page | 8 9 10 11 12 13 14 15 16 17 18 19  | Next Page >