Search Results

Search found 9596 results on 384 pages for 'remote assistance'.

Page 12/384 | < Previous Page | 8 9 10 11 12 13 14 15 16 17 18 19  | Next Page >

• Remote connection to dynamic public ip & private ip addresses

  - by user53864

  Many times I connected to windows computer which has static public ip address via remote desktop over wan links. I'm wondering how could I connect to the remote computer that has dynamic public ip address & private ip addresses assigned. I've 2 systems at home: xp system-------connected to internet(dynamic public ip) & allowed other users to connected to the internet on the interface. windows vista system--------enabled dhcp on the interface to access internet from xp. How could I remotely connect from my office to the 'vista system'?. If I've a router/modem at my home it may be possible to allow the ports for the system but I don't. Any tips?

  Read the article

• HP-UX -> Linux incremental remote backup

  - by stack_zen

  Hi. I've the need to setup a differential backup process from a range of remote HP-UXes to a central RHEL5 server. I'd happily go with rsync, problem is, stock HP-UX 11.11 has no built-in rsync and I don't have permissions to install any software on the remote stock HP-UXes. How should I approach this? HP-UX provides: fbackup (HP-UX exclusive) cpio (available in RHEL5, allows backing up only the files which changed, but always grabs the totality of the file) ssh remote_user@remote_host 'find /u01/engine/logs/ -type f -name "*.log" | cpio -o | gzip -' | cpio gunzip - | -idmv Those solutions don't really answer my incremental (bandwidth efficiency) problem do they?

  Read the article

• Bash loop to move directories on a remote host via ssh

  - by I Forgot

  I'm trying to figure out a way to perform the following loop on a remote host via ssh. Basically it renames a series of directories to create a rotating backup. But it's local. I want it to work against directories on a remote host. while [ $n -gt 0 ]; do { src=$(($n-1)) dst=$n if [ -d /backup/$src ]; then { mv /backup/$src /backup/$dst; } fi; } ((n--)) done;

  Read the article

• Remote desktop session ends abruptly with a "protocol error"

  - by Jon

  Intermittently we get a problem where a remote desktop session will get disconnected with the error message “Because of a protocol error, this session will be disconnected. Please try connecting to the remote computer again.” We are getting this with one server only which is running Windows Server 2008, connecting with Windows 7 clients. The session itself stays running, you just get disconnected, and you can try and reconnect. Sometimes you get in for a while then it will kick you out. We are connecting from Windows 7 clients. We have tried connecting using Cord on a Mac and this works fine, so it's not like the session itself is corrupted. One problem is that there are some critical applications running under the session (I know, let's not discuss the idiocy of that), so we cannot reset the session in any way during the working day – so any diagnostics must have minimum impact. Thanks, Jon

  Read the article

• Locking down remote desktop using AD GPO

  - by Brettski

  I am currently locking down a companies remote desktop access via a VPN. What I need to do is disable remote printing, file transfer and clipboard via active directory for the workstations that will be accessed. I am having trouble figuring out which GPO's are used to restrict this. My basic approach is to restrict VPN users to port 3389 so the will be able to access their work computers remotely but nothing else (I will look into layer 7 scanning later). With this I want to ensure they are unable to transfer and data via files, printing or the clipboard. The environment is Windows Server 2003

  Read the article

• SSH + MysqlDump Remote Backup Script

  - by bundini

  I'm trying to issue a remote mysqldump command, redirect stdout to a dmp file, then tar that up. I'm a bit confused as to how to do the redirection bits over ssh: i.e. ssh [email protected] mysqldump $dbname -u admin -p > dbdump.dmp && tar cvzf dbdump.tar.gz dbdump.dmp Issues: 1) I'm not providing the password because I want it to prompt me. Will an ssh remote command deal with this? 2) What's the deal with the syntax? Do I want to use quotations, or don't I? What happens with the redirects and pipes? Do those have to be escaped or formatted in some special fashion.

  Read the article

• Need Boxee/Vista remote control recommendations

  - by gurun8

  I have an Acer Aspire X1200 (specs link below) desktop computer that I've installed Boxee on and it works great. And it looks like it's going to be a perfect computer for a media player. It's small with lots of hard drive space and even has a HDMI output on it. http://support.acer.com/acerpanam/desktop/0000/Acer/AspireX1200/AspireX1200sp2.shtml I also have a Harmony® 880 Advanced Universal Remote (specs link below) that I'd like to use with the Acer computer. www.logitech.com/en-us/440/372 My thought is that I need to get a USB remote control adapter, right? So I did a quick Google search and found products from $5 to hundreds of $$$. Does anyone have recommendations? Things you like/dislike about certain remotes? This Acer is running Vista and has a AMD LIVE!: Athlon X2 dual-core processor. 64 bit some times makes it a little more difficult. Thanks for the help.

  Read the article

• Bootable and remote controllable imaging software?

  - by stefan.at.wpf

  I am looking for an imaging software, that one can boot from CD or usb stick (therefore without installing anything on the system!) and then control by some kind of remote desktop. So something like a combination of Acronis TrueImage's Bootable Media and Windows Remote Desktop. I don't even need to be able to store the backup on a network drive, as an external usb hdd is attached for these purposes. Background: A system that is normally controlled by SSH / command line and therefore has no keyboard/mouse connected that I could use to control Acronis TrueImage.

  Read the article

• remote desktop connection help?

  - by robin agrahari

  sir, i have created a web application in eclipse,db2 database server is running on my pc.so i can access the web application through the address http://localhost:8080/LimsWeb i used team viewer software to establish a remote desktop connection. can my friend somehow connect to my pc so that when he types the above url in his browser he will be able to fetch the pages of the application. i was able to do this by connecting with remote desktop mode.but in that case my friend was able to use the application which i created running on my pc only and in the window provided by team viewer.i want that he can run the application on his own computer calling the given url from his own browser. please help

  Read the article

• Remote Desktop Connection over VPN on mac

  - by Diego Faria

  I'm trying to connect to a Windows computer on over a VPN connection using Remote Desktop connection. I opened Network on mac and created a new connection. Interface: VPN. VPN Type: PPTP. I filled the inputs for server address, account name, password and applied. I connect the VPN and it connects. I open Remote Desktop Connection and put the IP of the machina i want to connect but it dont connect, a problem occurs saying that the machina may be turned off and etc. But in a windows machine I can connect there and the machine is up and running. On my mac I ping to the ip address that a want to connect and it has no response. I think that the vpn have a problem, is there a way for me to certificate that i am on the vpn network ? Whats going on?

  Read the article

• OS X Windows Remote Desktop Client cache location

  - by stevekuo

  Where is the cache file located for Windows Remote Desktop Client for Mac OS X?

  Read the article

• Add multi monitor option to remote desktop web access

  - by Eds

  I have a test environment for a remote desktop farm with a connection broker load balancing logins across remote desktop session host servers. All servers are built on Server 2012 R2. Using rd web access, we can access this farm from anywhere. When logging in via web access, you can choose the screen resolution or use full screen. If you have two monitors when selecting full screen, it will always use both your monitors. Does anyone know how to adjust the RDWeb page so that you can choose whether or not to use both your monitors? This option is in the GUI from RDP 6.1 onwards, so I would imagine there is a way to also add it the web access page.

  Read the article

• Remote desktop to multiple windows machines on a LAN with dynamic IP

  - by kevyn

  Is it possible to use remote desktop to connect to multiple computers inside a network that has a dynamic IP address? I use a netgear WPN824 router which has dyndns onboard - but I currently use No-IP to control a single computer that I use most frequently. Every so often I need to get onto a couple of other computers in the network, but don't know how to go about this without logging onto one computer, and then starting another RDC session from that machine. What I would like to be able to do is connect to my router, and be able to see a list of connected devices, and then choose which to remote desktop onto. - I appreciate this probably is not be possible, but any other suggestions are welcome!

  Read the article

• Remote desktop to my KVM virtual machine

  - by user6

  I've got a dedicated server running Debian 6. I've set up a windows 7 virtual machine using KVM. Now I'm trying to get Remote desktop working. I'm guessing i have to do some port forwarding. The virtual machine is in a NAT. Remote desktop is already set up on it (another virtual machine can connect). I've tried using the iptables and countless of virsh commands of which I'm not even sure what they did. Anyone knows how to get this working?

  Read the article

• VNC-like remote control over home network

  - by Widor

  I'm aware of how to use VNC to share screens or grant remote control of your machine over the internet by using VNC or one of the web-based "go to my pc" type services. If two computers are connected to a router (i.e. standard home network), is there an easier way of viewing and controlling one computer from the other? I'd like to avoid going outside the LAN, onto the internet, then back in if possible. Both machines are Windows XP, but I'm not looking for Remote Desktop by the way.

  Read the article

• Remote Software Solution that Acts as a Client

  - by Richard

  I am looking for something that I am not sure exists. I have a remote computer that will not allow incoming traffic due to ISP blocking of ports(basically double NAT situation that I am unable to get around). I am wondering if I have a computer acting as a client, is there any solution out there that will allow remote access to the computer. I do have other servers on the net that have static IP's that the computer could initiate a connection with. I am thinking of using Debian Linux, However computer is not built yet so OS is not overly important at this point.

  Read the article

• Windows non-responsive during Remote Desktop connection

  - by pvieira

  This is Windows 7 Ultimate 64 bit. I use the command mstsc to establish a Remote Desktop connction to a remote server. The login window shows up, and while I'm entering the password the system almost freezes. Each character of the password takes 3 or 4 seconds to be accepted, and all other opened programs are not accessible. This behavior tends to happen only the first time I use mstsc. If I used it again moments later, everything is normal. Whar can be the cause of this problem?

  Read the article

• Remote connection to dynamic public ip & private ip addresses

  - by user51737

  Many times I connected to windows computer which has static public ip address via remote desktop over wan links. I'm wondering how could I connect to the remote computer that has dynamic public ip address & private ip addresses assigned. I've 2 systems at home: xp system-------connected to internet(dynamic public ip) & allowed other users to connected to the internet on the interface. windows vista system--------enabled dhcp on the interface to access internet from xp. How could I remotely connect from my office to the 'vista system'?. If I've a router/modem at my home it may be possible to allow the ports for the system but I don't. Any tips?

  Read the article

• How to increase Remote Desktop resolution?

  - by BugAlert

  I'm using Windows 7 on a PC and connect to it via Remote Desktop Connection for Mac by MS, using a Mac. On the Mac, I have a 27" Display with 2560 x 1440 px resolution. The PC has a high performance graphics card (one of those that needs an additional power supply). Both machines are connected via network cable to a router. So network should be insanely fast. However, the max resolution I can get is 1400 x 1050. The PC just has a old and bad 21" monitor connected to it. How can I increase the resolution to 2560 x 1440 to work fullscreen with the Apple LED Cinema Display via Remote Desktop? Maybe I shouldn't even ask, because I already experience some lag at the low resolution of 1400 x 1050. But I guess this can be resolved as well?

  Read the article

• Uploading many large files to a remote server

  - by TiernanO

  I am in the process of creating an offsite backup, and need to do a initial load of data. Currently, that's about 400Gb, give or take 10Gb or so... The backup system is producing files which are about 4Gb each, and has some other, smaller related files also. So, i need to transfer all 400ish gigs to a remote server, but how? What is the best method? I have full remote access to the server, so i can install anything i need to install. There are Windows, Linux and a Solaris VM running on the box itself, so any of those can be used there, and i have Windows and Linux at home. I have 2 internet connections in house, 10Mb/s uploading on each, so something that could potentially split the number of connections would be handy (kind of like GetRight, but in reverse... PutRight?).

  Read the article

• Bad password when logging in via Remote Desktop

  - by Shiraz Bhaiji

  I have just setup a windows 2003 server running in hyper-V. When I log in via Hyper-V it works fine. When I try to login via remote desktop I get a bad user name or password error. I have: Disabled the firewall Enabled remote connections Before I did the above I did not get to the login screen. I can ping the ip address of the image. I am trying to login as Administrator. Anyone have an idea about how to fix this? Edit I have now managed to fix this by changing the password to something without special characters. Strange thing is the I could not see any problems with the passord, had tried typing it into the user name field to check it.

  Read the article

• Remote desktop on Mac

  - by Crystal

  I just started a job using a Mac. I also have a Mac at home. The IT dpt here does not know how to remote login to my desktop from home. They installed the Cisco VPN client and game an account for that. I think at this point I need some remote desktop software to login to my work Machine. I looked online and downloaded the free version of TeamViewer. I didn't really understand how to use it. I have my work computer's name, and was hoping that would be enough to login, but I think I am mising a piece of the puzzle. Any thoughts on how to login to my work computer? Thanks.

  Read the article

• Remote Desktop Solution without VPN, with locked PC

  - by ujjain

  Sometimes I work from home and I use either of these 2 methods: Teamviewer VPN + Remote desktop When I connect with VPN I am however unable to browse any websites on my own computer, which can be very inconvenient when I am basically waiting an hour for somebody else to finish his job to do a 5 minute job. It would be nice if I could still continue browsing. A solution for this is Teamviewer. With Teamviewer I can manage the other computer, without suffering the restrictions of using the VPN. Everybody in the working area however, can see me using my computer remotely and this is not a good situation either, especially during work hours. I would like a solution that allows me to continue browsing normally and still control my remote workstation, without other people seeing every move I make on the workstation.

  Read the article

• Remote desktop connection over internet without port forwarding?

  - by hellbell.myopenid.com

  Hello, let's say that we have this situation. I want to remote desktop connection to my friend over the internet, but I don't have premission for port forwarding on the router, and my friend also can't configure his router. So the question is how to connect to computer without port forwarding, I know that is out there some programs like teamviewer, or some else that solve that task, but what I looking for is the some free site that can make "bridge" between are two computer, or is it possible to install on computer some program that simulate virtual router or something like this http://www.youtube.com/watch?v=SIof7kFTgJE .... I need this cause I have my own simple remote desktop connection program, but I can't connect to other computer outside network cause don't have premission to configure router :( any comment, link, advice, or tutorials will be very helpful :)

  Read the article

• Remote sessions limited to two of many monitors?

  - by Xaephen

  I have 3 monitors attached to my local PC arranged in a triangle. My goal is to have the top monitor display local content, while displaying a remote session across the bottom two. I have gotten this to work with span and RDP, but I am looking for a software that would allow the remote sessions to be restricted to a number of monitors of my choosing, rather than spanning. Does this software exist? I've looked extensively. If there is a hack or something that might do it, I'm totally down for getting my hands dirty.

  Read the article

< Previous Page | 8 9 10 11 12 13 14 15 16 17 18 19  | Next Page >