Search Results

Search found 3061 results on 123 pages for 'sata hdd'.

Page 12/123 | < Previous Page | 8 9 10 11 12 13 14 15 16 17 18 19  | Next Page >

• new hard drive on Dell Adaptec 2610SA 6 port SATA RAID PCI card

  - by Ragnarok85

  I have a Dell Adaptec 2610SA 6 port SATA RAID PCI card with 3 hard drives on it and everything works fine. I plugged another hard drive to it and the system (Ubuntu 12.04, 64 bit) seems not to recognize it. Strange thing is that, as happened in the past, if I re-install the system, it recognizes the new hardware plugged to RAID card. Of course I don't want to re-install ubuntu each time I plug a new hard drive on my RAID card. Any idea? Thank you in advance

  Read the article

• Fake RAID (dmraid) not seeing new SATA drives

  - by rausch

  I have three drives in my machine, one SSD with 32GB and two 1TB drives, attached to an Intel 82801JI (ICH10) SATA AHCI Controller. The problem is, that I can access only one of the 1TB drives when the other one is not plugged in. When it is plugged in I see the drives as sda and sdb, but there seem to be no partitions. Looking at these drives with cfdisk, the partitions are there, though. Both of the 1TB drives are carrying a partition, being part of a software RAID1, created with mdadm. Before I threw the SSD into the mix, the other two have been working fine. Any hints?

  Read the article

• Unable to see External HDD in Windows Explorer

  - by Jamie Keeling

  I have bought a 320GB External HDD which I want to use with my Playstation3. I know it will only work with a Fat32 file system so using some free HP software it formatted it, unbeknown to me it will only work up to 32GB. After seeing this I panicked, downloaded Partition Wizard Home Edition and deleted the partition. As I was about to create a new partition to put it back to NTFS (I'd just wanted to be able to use it in the first place at this point) I accidently knocked the cable out of my computer for the HDD and after replacing it the External HDD is no longer recognised by the My Computer option, Disk Management asks me to initialise the disc using MBR but it fails saying "Copy protected". Even the partitioning software I previously mentioned can't do anything about it, all it says is "Bad Condition" and I can't perform any operations on it. Would anybody be able to guide me in getting this sorted? I'm terrified i've wasted a perfectly good 320GB HDD.

  Read the article

• How do I determine if my controller is in IDE or AHCI mode in Linux?

  - by philcolbourn

  I have an old MacBook Pro 4,1 (early 2008) - but I suspect an answer would apply to many MacBook Pros. It has an Intel IDE/SATA controller (ICH8M/ICH8M-E). I have installed a patched MBR that is supposed to put my controller into AHCI mode. It does this by setting some controller port value that I don't understand. This seems to work as I get this from lspci: 00:1f.1 IDE interface: Intel Corporation 82801HM/HEM (ICH8M/ICH8M-E) IDE Controller (rev 03) 00:1f.2 IDE interface: Intel Corporation 82801HM/HEM (ICH8M/ICH8M-E) SATA Controller [AHCI mode] (rev 03) Now most, perhaps all, sites that provide a solution (enabling AHCI) suggest that after a sleep/wake cycle that a controller will revert to IDE mode due to how Apple support Windows. They recommend disabling sleep. From author of patchedcode.bin I think Enabling AHCI for Windows on MacBooks NB: I do not have bootcamp installed and I do not have Windows installed. Is there a way to prove that my controller is in IDE or AHCI mode? Background Data Using patchedcode.bin MBR I get this in syslog: Jun 12 22:33:22 max kernel: [ 1.860955] ahci 0000:00:1f.2: version 3.0 Jun 12 22:33:22 max kernel: [ 1.861052] ahci 0000:00:1f.2: irq 45 for MSI/MSI-X Jun 12 22:33:22 max kernel: [ 1.861117] ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 3 ports 1.5 Gbps 0x1 impl SATA mode Jun 12 22:33:22 max kernel: [ 1.861120] ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part ccc ems Jun 12 22:33:22 max kernel: [ 1.861130] ahci 0000:00:1f.2: setting latency timer to 64 Jun 12 22:33:22 max kernel: [ 1.880880] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no) Jun 12 22:33:22 max kernel: [ 1.880983] scsi2 : ahci Jun 12 22:33:22 max kernel: [ 1.884552] scsi3 : ahci Jun 12 22:33:22 max kernel: [ 1.886932] scsi4 : ahci Jun 12 22:33:22 max kernel: [ 1.886998] ata3: SATA max UDMA/133 abar m2048@0xdb504000 port 0xdb504100 irq 45 Jun 12 22:33:22 max kernel: [ 1.887000] ata4: DUMMY Jun 12 22:33:22 max kernel: [ 1.887002] ata5: DUMMY Jun 12 22:33:22 max kernel: [ 2.204103] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300) Jun 12 22:33:22 max kernel: [ 2.204656] ata3.00: ATA-8: FUJITSU MHY2200BH, 0081000D, max UDMA/100 Jun 12 22:33:22 max kernel: [ 2.204662] ata3.00: 390721968 sectors, multi 16: LBA48 NCQ (depth 31/32), AA Jun 12 22:33:22 max kernel: [ 2.205324] ata3.00: configured for UDMA/100 Jun 12 22:33:22 max kernel: [ 2.205554] scsi 2:0:0:0: Direct-Access ATA FUJITSU MHY2200B 0081 PQ: 0 ANSI: 5 Using my original MBR I get this from syslog: Jun 13 18:07:13 max kernel: [ 0.622861] ata_piix 0000:00:1f.1: version 2.13 Jun 13 18:07:13 max kernel: [ 0.622869] ata_piix 0000:00:1f.1: power state changed by ACPI to D0 Jun 13 18:07:13 max kernel: [ 0.622924] ata_piix 0000:00:1f.1: setting latency timer to 64 Jun 13 18:07:13 max kernel: [ 0.623339] scsi0 : ata_piix Jun 13 18:07:13 max kernel: [ 0.623730] scsi1 : ata_piix Jun 13 18:07:13 max kernel: [ 0.623765] ata1: PATA max UDMA/100 cmd 0x8108 ctl 0x811c bmdma 0x80e0 irq 21 Jun 13 18:07:13 max kernel: [ 0.623767] ata2: PATA max UDMA/100 cmd 0x8100 ctl 0x8118 bmdma 0x80e8 irq 21 Jun 13 18:07:13 max kernel: [ 0.623810] ata_piix 0000:00:1f.2: MAP [ Jun 13 18:07:13 max kernel: [ 0.623811] P0 -- -- -- ] Jun 13 18:07:13 max kernel: [ 0.623866] ata_piix 0000:00:1f.2: setting latency timer to 64 Jun 13 18:07:13 max kernel: [ 0.624241] scsi2 : ata_piix Jun 13 18:07:13 max kernel: [ 0.624558] scsi3 : ata_piix Jun 13 18:07:13 max kernel: [ 0.624862] ata3: SATA max UDMA/133 cmd 0x80f8 ctl 0x8114 bmdma 0x8020 irq 18 Jun 13 18:07:13 max kernel: [ 0.624865] ata4: SATA max UDMA/133 cmd 0x80f0 ctl 0x8110 bmdma 0x8028 irq 18 Jun 13 18:07:13 max kernel: [ 1.208879] ata3.00: ATA-8: FUJITSU MHY2200BH, 0081000D, max UDMA/100 Jun 13 18:07:13 max kernel: [ 1.208882] ata3.00: 390721968 sectors, multi 16: LBA48 NCQ (depth 0/32) Jun 13 18:07:13 max kernel: [ 1.208961] ata1.01: ATAPI: MATSHITA DVD+/-RW UJ-867S, 1.00, max UDMA/33 Jun 13 18:07:13 max kernel: [ 1.216186] ata3.00: configured for UDMA/100 Jun 13 18:07:13 max kernel: [ 1.224396] ata1.01: configured for UDMA/33

  Read the article

• missing bootmanager after win7 installation from external hdd

  - by Alex

  today i tried to install win7 from an external hdd to my system. i tried this tut http://www.pcworld.com/article/165159/install_windows_7_from_an_external_hard_drive.html and everything went fine till i pluged off the external hdd. after i pluged it off and tried to restart the system i get a missing boot manager error. if i plug the external hdd in again it's all working fine again. i've searched for the last 2h and didn't find a good answer. did any of you have one ? regards Alex ps: i already tried any forms of reperation and the system is installed on the correct hdd.

  Read the article

• Error in using DBAN on HDD

  - by John Watson

  I am using DBAN to erase HDD. DBAN is loaded from a CD and BIOS Boot order has been set to favour CD drive. On starting laptop, system boots from CD and DBAN interface can be seen. DBAN detects two storage devices, HDD and the SD Card. My HDD IS 320GB but DBAN says 298GB. It erases the SD card but when i try to erase HDD, it gives following error. DBAN finished with non-fatal errors. *ERROR /dev/sdb (process crash) *ERROR /dev/sda (process crash)

  Read the article

• HDD vanished after wakeup from standby

  - by Sam

  In my computer I got two hard drives: One 80GB Intel X25 Postville SSD for the system and a 1,5TB Sata HDD for data. When I put the system into standby, and wake it up again, roundabout 50% of the time the 1,5TB HDD is not found. It just vanished from the system (wreaking havok to all programs running which had open files on it). Even going into the system management and refreshing the drives does not find the lost HDD. There are no messages about this in the event log. After a warm reboot the hdd is found again, just like it should. The system is a Shuttle SP35P2 Pro with 8GB Ram and DualCore CPU, OS is Windows 7 Ultimate. I even set up the OS anew, didn't help. Any ideas what might cause this? How to debug, or maybe even fix it?

  Read the article

• Disaster After Removing Two HDD From LaCie RAID 0 Case

  - by John

  This is the second time this has happened. I own a LaCie IDE RAID 0 Enclosure and the RAID went bad. The system gave me a warning that the data could be read from the RAID but that nothing could be written, and to remove the data ASAP. I did that and erased and reinitialized the RAID. System reported it was fine, no issues. I wrote to the RAID again and the system reported the same issue. So, I removed the drives and tested them individually thinking one must have gone bad. Sure enough, one HDD reported all bad blocks, every single one after the Master Boot Record. I didn't think much about it because of the age of the drives, 5 years old. So, I bought two new drives plugged them in and started up the RAID again. Exactly the same thing happened. All was fine after initializing the RAID and then the next day after powering on the RAID the exact same issue. The HDD sitting in the same position as the first "bad" HDD reported all bad blocks. Obviously, this is an issue with LaCie's bridge board not with the drives. No utility I have used has been able to bring this HDD back to life. I thought I would just copy the MBR from the good drive to the new one using a sector editor but am hesitant. Is it possible the firmware on the HDD has been corrupted by the LaCie bridge board?? What else could be the cause of such an issue? How can I fix this drive?

  Read the article

• How to tell LAMP server to look at 2nd HDD for files when php is still pointing to a location on 1st HDD?

  - by Jizbo Jonez

  I have a phpBB install that currently has its attachments stored on my main HDD, but I am running out of room there fast. So I want to get a 2nd HDD installed on the server and put all of the phpBB files on that instead. So my question is how can I tell phpBB to look at my 2nd HDD for the files when it is still pointing to a location on 1st HDD? I've read a bit about softlinks and mod_alias but am still confused about how they work exactly. Does anyone know a good way to do this?

  Read the article

• Error in mounting HDD

  - by Vikramjeet

  I am getting the following error whenever I mount my external HDD. It was working before and then I opted for safely removing the drive. Now its giving me following error Error mounting: mount exited with exit code 13: ntfs_mst_post_read_fixup_warn: magic: 0x43425355 size: 4096 usa_ofs: 8850 usa_count: 65535: Invalid argument Actual VCN (0x800006009000000) of index buffer is different from expected VCN (0x0). Failed to mount '/dev/sdb1': Input/output error NTFS is either inconsistent, or there is a hardware fault, or it's a SoftRAID/FakeRAID hardware. In the first case run chkdsk /f on Windows then reboot into Windows twice. The usage of the /f parameter is very important! If the device is a SoftRAID/FakeRAID then first activate it and mount a different device under the /dev/mapper/ directory, (e.g. /dev/mapper/nvidia_eahaabcc1). Please see the 'dmraid' documentation for more details.

  Read the article

• what is the fastest way to copy all data to a new larger hard drive?

  - by SUPER user

  I was certain this would have been covered before, but I cannot find an answer amongst all the almost-duplicates that come up; sorry if I've missed something obvious. I have a full 320gb disk inside my machine, a new 1tb disk to replace it, and a USB 2.0 chassis. It is only data on a single partition, no OS/apps involved, and the old drive will be kept somewhere as backup (no secure wiping etc). The simple option would be to put new disk in USB chassis, copy files, then swap them over. But for USB pen drives, reading is around 4x faster than writing. If the same is true for a USB SATA chassis (is it?) then it would be significantly faster to swap the drives first and read from the old drive over USB, right? Then the other consideration is that copying lots of files is usually slower than a single file of equivalent size. Is Windows 7 smart enough to do everything in a single lump like that, or is there specialised software that should be used instead? (Even if SATA-SATA copying is faster than involving USB, knowing what to do when it isn't an option is useful information.) Summary: Does a USB SATA chassis suffer from a read/write inequality? (like a USB pen drive does, but unlike a direct SATA connection) Can Windows 7 do sequential access? (I can't find confirmation if Robocopy does this.) Or is it necessary to use a bootable CD/USB with something like Clonezilla to achieve sequential copy speeds?

  Read the article

• programm and user data from an old hdd to a new installation on ssd

  - by hans wurst

  i tried everything since days, now i ask. i got a ubuntu system on my old hdd, wich is connectet via usb to this system and a sdd is build in my notebook. at the moment i am running a ubuntusystem from an usb stick. it have tried to clone my disk(cahnge uiid, etc), to transport the data via deja dup and much more. the result was nothing or strange things. my idea is to copy the important data form the old system to the new(home and whatever), but it is not allowed to do this. somebody her who know a tool wich can do this, or got an an other idea.

  Read the article

• LG LW20 Express won't boot after hdd replace

  - by Mika

  My old laptop (LG LW20 Express) got a hdd failure and I replaced the hdd. Now the laptop won't boot from cd or usb. I'm trying to install ubuntu on it. When I turn the laptop on it shows me the startup screen but when it should be the time to load operating system it just gives a black screen and starts over. This loop continues until I shut down the laptop. I created the usb boot drive following this guide https://help.ubuntu.com/community/Installation/FromUSBStick/ I used my boot cd to install ubuntu on this machine I'm using right now. So at least the cd should work. From the BIOS I can see that my newly installed hdd is recognized and put as a secondary master. Also the cd and removable media are in the boot list before hdd. The laptop runs pretty hot. The fan is at full speed pretty soon after the laptop is turned on. Earlier I suspected that it would have been the almost broken hdd that would have produced that heat but there obviously is something else also. Any ideas what to check?

  Read the article

• Need help. HDD Failed

  - by jiewmeng

  i have a seagate 3.5" 500GB SATA2 HDD that i put in a USB case (vantec) that failed recently. symptoms: at first, it started except that attempts made to browse certain folders resulted in "Data Error (Cyclic Redundancy Check)". then when i tried restarting the hdd, then i got a RAW partition, and windows 7 said i need to format it. i also tried using a desktop to connect to the HDD directly using SATA, windows 7 stuck at "starting windows" for abt half hour b4 i gave up on it. in the BIOS, it seems to detect the HDD model correctly, something like STA3500xxx something like that i also tried using TestDisk as suggested by jaclaz on MSFN and it did not find any partitions what could i do now?

  Read the article

• Clicks or ticks every minute when HDD is idle [closed]

  - by Ramy

  Possible Duplicate: Clicks or ticks every minute when HDD is idle My HDD is a My passport... It's 2 weeks old. I hear this tick or click followed by another one about 8-9 secs later, and they repeat every minute almost exactly... They usually happen and the LED light blinking.. It's not like the other clicks you hear that indicate any inevitable HDD failure, it's much lower in volume. I don't know what that is, however it's different than the rest of the HDD usual sounds...It's close to the sound of the mouse click. It sometimes also happens when I access a file on the drive mostly after being idle for a while, sometimes randomly not really sure... The drive though is working well, the SMART report comes out OK and without warning, and disk management shows it healthy... What could be the cause of this??

  Read the article

• New HDD formating on Ext4 root permission

  - by Carlos Salmeron

  OK people good evening, I have this new 80Gb HDD I want to use it as a backup storage for my actual system (14.04) not a server. I formatted it with Gpart but I just can't write in it, when I search for permissions it tells me that only root users can write/create in it, log on as root user and try to change permissions, and I can't do that either. Long have I searched for an answer, looking everywhere but not to find any, is there a way to format it and use it with my user permission? Don't want it on NTFS, is there a way?, I have searched in these forums but there’s only an answer to format it in NTFS, so please. Thank you in advance.

  Read the article

• Second HDD not seen by Windows 7 on Dell Xps l501x

  - by George

  I have a Dell XPS Laptop (l501x). I have replaced the original Seagate 500GB hard drive with an SSD Intel 320 120GB when I first purchased it a year ago. It's been working great. The laptop is booting in about 23 seconds, so the SSD is great. I have an Acronis image created that I came back to every three months just to keep everything clean. The SSD is partitioned with one logical drive for my data. So, recently I thought since I am not using my optical drive often enough to swap it out with a HDD caddy and add my seagate 500gb hard drive. I ordered the caddy placed the HDD in it and now load Windows. It just hangs on the screen that should show the Windows logo. I have tried everything that I know and searched it online. I have uninstalled the SATA controller AHCI and let Windows install it. Still will not boot into windows. I wanted to mention that the Seagate 500GB drive was the one that came with my laptop before I switched to the Intel SSD. As you know Intel has this application called Intel Rapid Technology which loads once in a while and shows the second hard drive, but then, when I restart it hangs again and Windows will not load. As soon as I remove the HDD Caddy and restart it loads Windows fine. I also formated the Seagate 500GB HDD in NTFS and still Windows will not load. When I go into the BIOS it shows the Fixed SSD and also "Sata ODD 500GB" instead of the optical drive but it will not boot into Windows when the HDD caddy is present. There is nothing wrong with the caddy. I have another laptop (Asus) and I installed the HDD caddy and Windows 7 loads without any glitch. I don't get it. I have also flashed the BIOS because Dell had a new version (A08). I also wanted to add that I refreshed Disk Management and the Device Manager and the second drive does not display. At this point I think it's a Windows issue so before I reinstall Windows 7 Home Premium from scratch I wanted to see if there was anything I was missing. Any advice would be greatly appreciated.

  Read the article

• No HDD shows up during install 12.04 on Lenovo U410

  - by varunthacker

  I tried installing Ubuntu 12.04 on my Lenovo U410 laptop. When I launch installation no partitions shows up. The U410 has 2 HDDs. 32 GB SSD on /dev/sda and a 500 HDD on /dev/sdb Ideally I would like to install Ubuntu on the 32GB SSD and keep Windows on the 500 GB one and not use the Intel Smart Response Technolog. I'm ok with flashing my drive and starting from scratch with this. Or do you'll have any better suggestions on how to go about partitioning my drive and how to do it?

  Read the article

• DISK BOOT FAILURE after upgrading power supply

  - by Phenom

  After upgrading my power supply, I get the following error message when trying to boot into Windows 7. DISK BOOT FAILURE, INSERT SYSTEM DISK AND PRESS ENTER My Windows 7 installation is on a SATA hard drive. I'm able to fix this problem if I hook up my IDE hard drive, then it boots the SATA hard drive fine. I don't like this solution though because then that means my IDE hard drive is drawing power even though it isn't being used. Why would a newer power supply need the IDE hard drive hooked up just to boot into the SATA hard drive? There are no boot files on the IDE hard drive; it is completely empty. My old power supply did not need it hooked up in order to boot the SATA hard drive.

  Read the article

• Cannot copy anything onto WD Elements 1TB External USB HDD

  - by Aashish Vaghela

  I have a Western Digital 1023 Elements 1TB External USB HDD. Recently, it has started an unusual problem. I cannot copy any file of any size on to that 1TB hard-drive, eventhough it has more than 400 GB free (out of 931GB actual size). I tried copying movies from one friends laptop, which did not work. I also tried another desktop to copy some study material e-books (in PDF), which also did not work. I get same CRC error when I try to copy anything from a computer's hard-drive onto this WD 1TB hard-drive. Vice-versa it's working. I mean, I can copy any file from the USB HDD onto local machine's HDD on any computer. It's like one-way traffic. This HDD is only 1 year old. What are my options ? Any suggestions ? Regards, Aashish.V

  Read the article

• Can i use a external USB portable HDD as a main HDD for PC?

  - by Jitendra vyas

  Can i use a external USB portable HDD as a main HDD for PC?

  Read the article

• How to automatically take daily HDD backup?

  - by user13107

  I think my HDD might have crashed. I don't want to lose data if this happens again. I have dual boot Windows/Ubuntu system. What is the best way to backup data and other software settings in Ubuntu? I don't care much about Windows partition, important stuff is in Ubuntu. I have 1 Tb external HDD (laptop HDD is of 500 gb total). One way would be to run rsync every day (or via cronjob) to backup everything to external HDD. What might be better ways of achieving this (backup)? Also are instant backup software recommended? Are there any disadvantages of instant backup as opposed to daily rsync?

  Read the article

• Dell Inspiron 530 - SSD Worth it?

  - by DrFredEdison

  I'm going to be upgrading my Dell Inspiron 530 (2.0 Ghz Intel Dual Core CPU, 3 GB RAM) to windows 7 soon, and rather than backup and reformat my existing drive, I'm planning on getting a 2nd drive to replace my current primary, and moving it to a secondary. Thus, this seems like an excellent time to get a solid-state drive, if its going to be worth it. As far as I can tell this machine has a SATA-I controller, and I'm unsure if I'll see a noticeable performance increase with an SSD without going to SATA-II. So I have a three part question here given all that: Will spending the money on a SSD be worth it if hook it into a SATA-I controller? Is it reasonable to upgrade the controller on this machine to a SATA-II controller? Given that this PC is kind of old to begin with, am I better off performance wise to just stick with a faster HDD?

  Read the article

• Ubuntu 11.10 USB 3.0 HDD

  - by Chazm

  I have a problem with my external HDD (WD My Book Essential 1TB) working on USB 3.0 port. I'm using dual boot setup with Windows 7 and Ubuntu 11.10, both 64 bit. While I'm running Windows and rebooting back to Windows everything works well. When I'm switchin to ubuntu everything works great as well. But after 1st reboot from ubuntu neither windows nor ubuntu mount the external drive. I have to reboot the device manually. I suspect that the problem is with unmounting the device on shutdown on ubuntu. The case concern only usb 3.0. When i plug the same device into usb 2 port the problem doesn't persist. Does any1 hit the same problem or have a clue what might goin wrong?

  Read the article

• Installed 11.10 on shared drive, when other partition mounted, HDD shown full

  - by Thebetpet

  I just partitioned a 500GB HDD 50%-50%. I installed ubuntu 11.10 on one half and copied a load of files onto the other. When I don't mount the other partition, it shows I have used 12.1GB and have about 240GB free. The second I mount the other partition, I can't copy any files over and get a disk full message. There is about 10-20GB Free on the other partition. Am I doing something wrong or is this a bug?

  Read the article

< Previous Page | 8 9 10 11 12 13 14 15 16 17 18 19  | Next Page >