Search Results

Search found 3061 results on 123 pages for 'sata hdd'.

Page 17/123 | < Previous Page | 13 14 15 16 17 18 19 20 21 22 23 24  | Next Page >

• SATA Blu-Ray drive not detected via USB adapter

  - by LTR

  I'm using an SATA blu-ray drive (Lite-On IHOS104), connected via a USB adapter to my Windows 7 (32-bit) notebook. The first time I plugged the adapter in, it worked perfectly. The drive appeared in Explorer, and my player software was able to play an encrypted Blu-Ray disc just fine. After the first reboot, it never worked again. Now it shows up as "removable media" with a size of 0 bytes, irregardless of whether a disk is inserted or not. The drive does not show up under the green "eject USB device" icon in the taskbar. The adapter is powered using a separate power adapter. I have tried: disconnecting all other USB devices testing with a DVD instead of a Blu-Ray disc letting Windows search for updated drivers for the drive - there are none using the same drive and adapter on another Win7 (but x64) computer. They work perfectly. using other USB ports on the same notebook - tried them all. using a different SATA/USB-adapter What else can I do to diagnose this problem?

  Read the article

• How to increase hard drive transfer speed

  - by atif089

  This is my motherboard GA-M61PME-S2 (SATA upto 3.0 Gbps) and This is my Hard Disk Samsung hd502hi Capacity 500 GB Cache 16MB Disks / Heads 1 / 2 Interface SATA 3Gb/s Spindle Speed 5400 RPM Sustained Data Rate OD 100 MB/s Average Seek 8.9 ms Average Latency 5.56 ms Data Transfer Rate 300 MB/sec Weight 470 grams Power: Idle / Seek / R-W / Spin-up 3.9W / 4.8W / 5.1W / ~24W Acoustics (sound power) 2.2 / 2.7 Bel (idle / quiet seek / performance seek) When I copy things from one partition to another they transfer at a maximum of 30 MBps. However the drive supports upto 300 MBps right ? How do I increase the transfer speeds? P.S - Using Windows XP, All partitions are NTFS.

  Read the article

• RAID driver to choose for slipstreaming XP installation on ASUS P5S800

  - by alex

  I'm trying to install Windows XP on my new SATA drive but I need to first slipstream the drivers with nLite. I've done this before, but not on an ASUS P5S800 - VM motherboard. I'm not used to the number of choices it gives me for drivers in SiS chipsets. When I look through the folder that I downloaded from ASUS for the RAID driver, I see many folders with different versions of the driver. Here are the folders or versions given. 180ob 964_180 965 966_968 What drivers do I need to add in order to get XP on my SATA disk?

  Read the article

• Trying to turn an WD Mybook 1TB to slave drive in PC

  - by Steph W

  Yes I realise that most external Hard Drives would not be transitioned into internal sitting Hard Drives, but unfortunately we broke the miniUSB connection that transfers the data from external Hard Drive to laptop. What we are TRYING to do now, is get the WD MyBook 1TB to funtion alongside (preferably as SLAVE) to my currently exsisting Desktop Hard Drive. both are SATA drives. We have the SATA power, and Data cables, and these are in place (but - somehow NOT working) - Help please - I am not computer illeterate, just don't know how to switch this so it works. How do I turn one into master, and the newer one (that was external) into the slave drive?

  Read the article

• ASUS P5B Plus motherboard - no any drives found - how to restore RAID array?

  - by Moha

  We have a small server machine with an ASUS P5B Plus motherboard and 4 SATA HDDs. The HDDs were configured in a RAID10 array. Up until now, everything worked fine, but now the system doesn't recognize the drives. BIOS is set to RAID, jMicron controller is set to RAID, yet I can't see any of the drives in the BIOS setup, and jMicron BIOS tells me "no any drives found" The HDDs all spin up, I hear no clicking sounds or anything that would suggest HDD error. I did a search on this problem and replaced the SATA cables as suggested, but nothing's changed. What I have in mind is checking the CMOS battery and resetting the BIOS to use IDE mode, but I don't know if it will ruin the RAID system on the HDDs. It is not a critical server and there's only one database running on it (which I have backup of), but I don't want to setup the server from scratch if not necessary. What should I try to restore the RAID array and put the server back to working order?

  Read the article

• AHCI on Windows if BIOS does not have the option but all hardware does support it?

  - by Foo Bar

  Is it somehow possible to use AHCI on Windows if the BIOS does not have the option to enable it? This is a known problem especially on mid-old Laptops that have chipsets and drives that perfectly support SATA and AHCI, but only provide the legacy IDE mode in BIOS. Especially with SSD's this can often be a problem. I know that Linux has no problems to run everything in SATA and AHCI mode on these machines. So, is there any possibility to also make Windows "override" the BIOS? Some kind of alternative BIOS's, drivers, etc? Or some kind of Linux-based boot module that emulates an AHCI-capable BIOS to Windows while booting up?

  Read the article

• scsi and ata entries for same hard drive under /dev/disk/by-id

  - by John Dibling

  I am trying to set up a ZFS pool using 4 bare drives which I have attached to my Ubuntu system via a SATA hot swap backplane. These are Hitachi SATA drives. When I list the contents of /dev/disk/by-id, I see two entries for each drive: root@scorpius:/dev/disk/by-id# ls | grep Hitachi ata-Hitachi_HDS5C3030ALA630_MJ1323YNG0ZJ7C ata-Hitachi_HDS5C3030ALA630_MJ1323YNG1064C ata-Hitachi_HDS5C3030ALA630_MJ1323YNG190AC ata-Hitachi_HDS5C3030ALA630_MJ1323YNG1DGPC scsi-SATA_Hitachi_HDS5C30_MJ1323YNG0ZJ7C scsi-SATA_Hitachi_HDS5C30_MJ1323YNG1064C scsi-SATA_Hitachi_HDS5C30_MJ1323YNG190AC scsi-SATA_Hitachi_HDS5C30_MJ1323YNG1DGPC I know these are the same drives because I wrote down the serial numbers, and all the other drives in this system are either Seagate or WD. The serial number for the first one, for example, is YNG0ZJ7C. Why are there two entries here for each drive? More to the point, when I create my ZFS pool which one should I use; the scsi- one or the ata- one?

  Read the article

• How to clone a HDD and then use the clone with VMware (so that Windows works!)?

  - by Ahmad

  I have a system on which Windows 7 is installed, and I am trying to make a clone of its HDD image, which I then want to use in my main PC with VMware, so that I can boot Windows 7 off the cloned HDD. I used Ultimate Boot CD v5.1.1 with the system whose HDD I wanted to clone, and I cloned it using EaseUs Disk Copy, which comes with Ultimate Boot CD. The source HDD was 250 GB in size which had 3 partitions, while the USB HDD I attached to the system, which was supposed to be the destination/clone HDD, was 320 GB in size. I chose to create an exact replica, and so 250 GB worth of data (partitions, etc.) was copied exactly, and the rest of the space was un-allocated. I now connected this USB HDD to my main PC, fired up VMware Workstation 8 and defined a new Virtual Machine, and chose to boot off the USB HDD. Result is that when Windows is booting (from the cloned HDD inside VMware), I get the blue screen error before I reach the login screen. How can I change my methodology so that Windows even boots from the clone? I can change any tools I use, etc.

  Read the article

• How to format my external HDD back to as "removable storage"?

  - by user990106

  Recently I formated my Seagate FreeAgent GoFlex external HDD in Mac OS X using GUID partition table since I wanted to install another Mac OS X onto that external HDD. However I changed my mind after my external HDD being formatted. Now I want to format my external HDD back to NTFS so that I can use it with my Windows 7. However, after I connected my external HDD via USB it didn't show up in my "computer" so I used "Disk Management" to check what's wrong with it. In the "Disk Management" I saw that there was one partition of my external HDD called "EFI partition" and I found that I could not delete this partition in the "Disk Management". So I tried to use "diskpart" in cmd and select the external HDD and commanded "clean". Then the EFI partition was gone and I created new volumn on that external HDD. However, after the volumn being created my external HDD did show up in my "computer" but it is in the "Hard Disk Drive" not in the "Devices with Removable Storage" as it used to be. I'm wondering if I can do anything to it to make it recognized as a "Devices with Removable Storage"?

  Read the article

• Formatting an external HDD stuck at 70%

  - by mahmood

  My external HDD which is a 250GB WD (powered by USB) seems to have problem! Whenever i try to copy some files, it stuck while copying. I decided to format it. So I used windows tool and performed the format (not quickly) however at nearly 70% it stuck. Then I decided to perform a low level format with lowlevel. Again it stuck at 70%. I endup that the HDD has bad sector. So is there any tool that mark the bad sectors and bypass them? It is not very reasonable to through 250GB because of some bad sectors! P.S: I saw a similar topic but there were no conclusion there either. The smart data is Attribute, raw value, value, threshold, status Read Error Rate, 50, 200, 51, OK Spin-Up Time, 3275, 154, 21, OK Start/Stop Count, 2729, 98, 0, OK Reallocated Sectors Count,0, 200, 140, OK Seek Error Rate, 0, 100, 51, OK Power-On Hours (POH), 1057, 99, 0, OK Spin Retry Count, 0, 100, 51, OK Recalibration Retries ,0, 100, 51 , OK Power Cycle Count, 1385, 99, 0, OK Power-off Retract Count, 425, 200, 0, OK Load /Unload Cycle Count,12974, 196, 0, OK Temperature, 43, 43, 0, OK Reallocation Event Count,0, 200, 0, OK Current Pending Sector Count,23,200, 0, Degradation Uncorrectable Sector Count, 0, 100, 0, OK UltraDMA CRC Error Count,6, 200, 0, OK Write Error Rate/Multi-Zone Error Rate,0,100,51, OK It seems that the most important thing is this line Current Pending Sector Count,23,200, 0, Degradation Any idea on that?

  Read the article

• BIOS setting: AHCI or RAID (when using SSD + 2x HDD in RAID-0)

  - by nixdagibts

  Hello there, I want to add a new SSD and use it as system drive with Win7 x64 installed. As driver I chose newest Intel Rapid Storage driver (not MSAHCI). I know that I have to use AHCI as BIOS setting for optimal SSD read/write performance. But I'm also using 2 normal HDDs as separate RAID-0 SSD: Win7 HDD: RAID-0 HDD: RAID-0 If I set my BIOS on my ASUS P5W DH Deluxe to AHCI, my RAID-0 cant be recognized And If im using RAID as setting, maybe my SSD has not its top speed. But I'm not sure about that. In short: AHCI no RAID-0 RAID no optimal SSD performance (?) Now my question: Can I use RAID as BIOS setting and be sure, that theres no decrease in SSD performance? Google finds so many articles with similar topics and my head is just exploding. Two examples: - set AHCI and after installing OS switch to RAID as BIOS setting... what? - use a diskette and F6 while installing win7... really? O.o I thought those times are gone

  Read the article

• SSD/HDD not exceeding 120 MB/s

  - by skiwi

  SO here is the situation: First this was my old PC, it had a 2x 1TB RAID 0 and a Corsair Force 3 SSD in it. This were the old speeds, measured by HDTune Pro. 2x 1TB RAID 0: Corsair Force 3 SSD Then my dad got my PC and we had several issues, in the end turned out both RAID and SSD controller were malfunctioning causing BlueScreens on 100% load. Removed the RAID 0, but leaving the HDD's intact and bought an Samsung 840 EVO 120GB, though the Corsair SSD is still in the system, just not as sytem disk anymore. 1TB HDD (one of them): Corsair SSD: Samsung SSD: We did not assemble the PC ourselves, so answering some technical questions might be more difficult, though we will do our best. First thing we noticed is that the Samsung 840 EVO is no where reaching it's advertised speed, even an Samsung 840 250GB (non-EVO) is reaching 350 MB/s in my own PC. Then we noticed that both SSD's are capped at 120 MB/s exactly, not sure if this is being caused by HDTune Pro, but very unlikely. And even worse, the Corsair Forza 3 was running faster before the system got reassembled. Does anyone have any clue what is going on?

  Read the article

• Install Windows 8 on SSD and Program & Users on HDD

  - by Foe

  I have been dealing with a few problems while installing Windows 8 on my computer. On my old configuration, I had Windows 7 installed on my 60Go SSD, and my programs and user data on my 1To HDD, thanks to relative links. Yet, while installing Windows 8 on my SSD, he made a small partition on my HDD "System related". Plus, I'm afraid using only links is a bit cheap, and I saw lots of people messing with their registry when trying to put user data on another drive. I read a lot about optimizing Windows 8 for SSD, putting Users on another drive, and very similar situation that didn't quite correspond to what I was trying to achieve. Here's what I tried : http://www.eightforums.com/tutorials/4275-user-profiles-relocate-another-partition-disk.html Booting on Audit mode and using an XML to relocate Users didn't work as the specified version in the file is a test one, and I don't what to enter if I'm using the last release. Booting with the install DVD in repair mode to do a copy of the User and create a relative link, resulting in an error on the logon screen while entering my password saying that "The profile can't be load" (average translation of my error from french to english) Do anyone know how to do a clean separated install of Windows 8, with OS on a drive, and the other data on a second one ? Thanks.

  Read the article

• PCI function number for SATA AHCI controller

  - by Look Alterno

  I'm debugging a second stage boot loader for a PC with SATA AHCI controller. I'm able to enumerate the PCI bus and find the hard disk. So far, so good. Now, lspci in my notebook (Dell Inspiron 1525) show me: -[0000:00]-+-1f.0 Intel Corporation 82801HEM (ICH8M) LPC Interface Controller +-1f.1 Intel Corporation 82801HBM/HEM (ICH8M/ICH8M-E) IDE Controller +-1f.2 Intel Corporation 82801HBM/HEM (ICH8M/ICH8M-E) SATA AHCI Controller \-1f.3 Intel Corporation 82801H (ICH8 Family) SMBus Controller My question: Is SATA AHCI Controller always function 2 in any PC? If not, how I found? I don't pretend to be general; booting my notebook will be good enough, without compromise further refinements.

  Read the article

• Toshiba G20-120 raid / sata drivers for integration with winxp or windows 7 installation

  - by ldigas

  The title pretty much says it all. Does anyone know where they can be downloaded ? Or how to turn off in bios sata for hdd's ? Bios is very simple, and I just don't see the option. In any case, anything that you could tell that would help me install a fresh xp or '7 windows, would be appreciated.

  Read the article

• HDD RAID0 question

  - by Jim

  If you have 2 raptor 10k rpm drives in Raid0, can you add another sata (7200prm) drive outside of the RAID or would it have to be inside the RAID? What would be the consequences of adding a 7200 RPM drive to the raptor 10k rpm RAID0 besides the I/O speed going to 7200rpm.

  Read the article

• Installing Ubuntu Server fails to detect SATA CD/DVD Drive

  - by Simon

  O/S: Ubuntu 8.04 Server LTS Drive: Lite-On SATA CD/DVD Burner, DS-8A4S Motherboard: Supermicro x8ste Booting from the CD/DVD works fine, but the installer fails to detect the drive.

  Read the article

• Monitoring RAID with CERC SATA 2s Controller from Ubuntu

  - by gshankar

  We've just reinstalled one of our servers with Ubuntu 10.04 LTS server. It's got a BIOS RAID system using a CERC SATA 2s Controller. (setup in a RAID 1 config) How do I monitor the health of my RAID setup from the Ubuntu OS? Is there a utility program i can use?

  Read the article

• SATA Hard drive not detecting

  - by Srin

  I have a dead laptop, Trying to recover data from the Hard drive (Sata2) I tried putting the HD in one similar laptop , it's not recognized I got USB-SATA Adapter and plugged the HD , and still the HD is not recognized can you tell me is there any other possible way to get my data back ?

  Read the article

• Mini-ITX Case that would take ~6 SATA Hard Drives

  - by Kyle Brandt

  Thinking about maybe building my own NAS. I would go with Raid 5, and would like maybe about 6 SATA drives: There a mini atx case that can hold this many drives (Non-Rack ideally) What sort of power will I need? Any way this won't be pretty loud?

  Read the article

• Enable ReadyBoost on a second internal HDD?

  - by kd304

  I have two SATA HDDs in my desktop PC (one for daily activity, one for storage and backup). I can finely use ReadyBoost with pendrives, but I wonder, Is there a way I could use my underutilized second HDD to participate in the cacheing mechanism (same concept as having two CPU cores crunch things in parallel: have two HDDs fetch data in parallel)? Clearly speaking: I want to enable ReadyBoost on my separate D: drive.

  Read the article

• XXClone as a tool for migrating Windows XP Home from PATA to SATA HD

  - by raw_noob

  Has anybody had any experience using XXClone as a tool for cloning an existing installation of Windows in order to move it from an old PATA drive to a new, larger SATA without having to reinstall everything? Did you have any problems? Or can you recommend an alternative (free) software tool that you know - preferably from repeated experience - is reliable? I'm looking to move Windows XP Home SP3 to a new disk: same file system, same partition size. Thanks for looking.

  Read the article

• Ubuntu raid 1 write errors

  - by Micah

  I have an Ubuntu server set up with two SATA drives in a RAID 1 configuration with MDADM. The machine is used to record raw video, which involves a lot of writing to the disk. Sometimes during video recording the computer will crash, will the following errors in kern.log: Mar 15 10:39:41 video kernel: [414501.629864] ata2.00: exception Emask 0x10 SAct 0x0 SErr 0x400100 action 0x6 Mar 15 10:39:41 video kernel: [414501.629870] ata2.00: BMDMA stat 0x26 Mar 15 10:39:41 video kernel: [414501.629875] ata2.00: SError: { UnrecovData Handshk } Mar 15 10:39:41 video kernel: [414501.629880] ata2.00: failed command: WRITE DMA EXT Mar 15 10:39:41 video kernel: [414501.629889] ata2.00: cmd 35/00:00:28:6d:f6/00:04:06:00:00/e0 tag 0 dma 524288 out Mar 15 10:39:41 video kernel: [414501.629891] res 51/84:b1:77:6e:f6/84:02:06:00:00/e0 Emask 0x30 (host bus error) Mar 15 10:39:41 video kernel: [414501.629896] ata2.00: status: { DRDY ERR } Mar 15 10:39:41 video kernel: [414501.629899] ata2.00: error: { ICRC ABRT } Mar 15 10:39:41 video kernel: [414501.629910] ata2.00: hard resetting link Mar 15 10:39:41 video kernel: [414501.973009] ata2.01: hard resetting link Mar 15 10:39:41 video kernel: [414502.482642] ata2.00: SATA link up 3.0 Gbps (SStatus 123 SControl 300) Mar 15 10:39:41 video kernel: [414502.482658] ata2.01: SATA link down (SStatus 0 SControl 300) Mar 15 10:39:41 video kernel: [414502.546160] ata2.00: configured for UDMA/133 Mar 15 10:39:41 video kernel: [414502.546203] ata2: EH complete Is this the result of faulty drives? Is software RAID just not performant enough for data rates ~15 MB/s, even with a quad-core i7? Thanks for your help. Edit: cat /proc/mdstat returns this: Personalities : [linear] [multipath] [raid0] [raid1] [raid6] [raid5] [raid4] [raid10] md0 : active raid1 sdb1[1] sda1[0] 976760768 blocks [2/2] [UU] unused devices: <none>

  Read the article

• Clone a SCSI drive to an IDE drive?

  - by AppsByAaron

  Is it even possible to clone a SCSI HDD to an IDE HDD? If so what are some good free tools to do so? Thanks!

  Read the article

• 2-Bay External HDD Enclosure in JBOD mode fails to detect both drives (Linux & Windows)

  - by mgc8888

  I recently purchased a couple of USB 3.0 External HDD Enclosures to use for storage and backup; the idea was to have one act as backup to the other, with 4 x 3TB drives in total. However, the second drive in each is not accessible in either Linux nor Windows, and I could not determine the reason. 1. Situation The two enclosures are slightly different (couldn't find them in stock at the same time) yet from many little details appear to be the same Chinese base design with a tweaked outer shell. The models are: Sharkoon 2-Bay RAID Box Fantec MR-35DU3 The drives are Seagate 3TB Barracuda ST33000651AS, firmware CC44, all identical. From reading manuals and online sources, I determined that JBOD would be the optimal setup for my needs -- addressing the two drives separately in each enclosure would be important, making it easy to swap drives and mix&match them if needed; all the other modes implied the controller doing a combination of the drives. The software used was Debian GNU/Linux - testing/wheezy - kernel 2.6.39-2 and Windows 7 Ultimate. 2. Description of the problem Now, here comes the problem: every time I connect either of the enclosures to a PC using the supplied cable (tried a different one as well), only the HDD in the top bay is readable, the one below is detected yet errors out in various ways. According to the manuals, it should not happen: in JBOD, the system should be able to "see" two separate drives upon connection. This happens with both enclosures and any combination of HDDs (i.e. if I swap them, the same thing happens), so the HDDs are good and I think so are the enclosures (two different companies making similar products that failed in an identical fashion would be very unlikely). The top HDD can be used fine every time, I actually tried a speed test from Linux and got about 150MiB/s reads, so all is working as it should; the one below refuses to work every time. So the failure is consistent. To make sure this was not some obscure Linux bug, I tried the same under Windows 7, and the system also only created one drive letter for a drive of 3TB size (so it was only seeing one instead of both). Placing an older, known good, 2TB drive in the top bay made that the one recognised, so we have the same issue under Windows as well. Log entries under Linux (tested here with a 3TB and a 2TB drive so I could differentiate them; either one works in the top enclosure, in the test setup the 3TB one is on top). You can see them being detected, the top one is ok, but for the bottom one only errors: Jul 19 23:28:15 media kernel: [260150.582436] usb 6-1: New USB device found, idVendor=1ca1, idProduct=18ae Jul 19 23:28:15 media kernel: [260150.582440] usb 6-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 Jul 19 23:28:15 media kernel: [260150.582442] usb 6-1: Product: Usb Sata Bridge Jul 19 23:28:15 media kernel: [260150.582444] usb 6-1: Manufacturer: SYMWAVE Jul 19 23:28:15 media kernel: [260150.582446] usb 6-1: SerialNumber: 39584B304C4E3441 Jul 19 23:28:15 media kernel: [260150.870412] scsi11 : usb-storage 6-1:1.0 Jul 19 23:28:16 media kernel: [260151.882087] scsi 11:0:0:0: Direct-Access SYMWAVE ST33000651AS CC44 PQ: 0 ANSI: 4 Jul 19 23:28:16 media kernel: [260151.882242] scsi 11:0:0:1: Direct-Access SYMWAVE ST32000641AS CC12 PQ: 0 ANSI: 4 Jul 19 23:28:16 media kernel: [260151.882677] sd 11:0:0:0: Attached scsi generic sg2 type 0 Jul 19 23:28:16 media kernel: [260151.882774] sd 11:0:0:0: [sdb] Very big device. Trying to use READ CAPACITY(16). Jul 19 23:28:16 media kernel: [260151.882857] sd 11:0:0:1: Attached scsi generic sg3 type 0 Jul 19 23:28:16 media kernel: [260151.882893] sd 11:0:0:0: [sdb] 5860533168 512-byte logical blocks: (3.00 TB/2.72 TiB) Jul 19 23:28:16 media kernel: [260151.883085] xhci_hcd 0000:03:00.0: WARN: Stalled endpoint Jul 19 23:28:16 media kernel: [260151.883582] sd 11:0:0:0: [sdb] Write Protect is off Jul 19 23:28:16 media kernel: [260151.883961] sd 11:0:0:1: [sdc] 3907029168 512-byte logical blocks: (2.00 TB/1.81 TiB) Jul 19 23:28:16 media kernel: [260151.884145] xhci_hcd 0000:03:00.0: WARN: Stalled endpoint Jul 19 23:28:16 media kernel: [260151.884570] sd 11:0:0:1: [sdc] Write Protect is off Jul 19 23:28:16 media kernel: [260151.884855] sd 11:0:0:0: [sdb] Very big device. Trying to use READ CAPACITY(16). Jul 19 23:28:16 media kernel: [260151.885286] xhci_hcd 0000:03:00.0: WARN: Stalled endpoint Jul 19 23:28:16 media kernel: [260151.885807] xhci_hcd 0000:03:00.0: WARN: Stalled endpoint Jul 19 23:28:16 media kernel: [260151.909595] xhci_hcd 0000:03:00.0: WARN: Stalled endpoint Jul 19 23:28:16 media kernel: [260151.910159] sd 11:0:0:1: [sdc] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE Jul 19 23:28:16 media kernel: [260151.910163] sd 11:0:0:1: [sdc] Sense Key : Illegal Request [current] Jul 19 23:28:16 media kernel: [260151.910167] Info fld=0x0 Jul 19 23:28:16 media kernel: [260151.910169] sd 11:0:0:1: [sdc] Add. Sense: Invalid field in cdb Jul 19 23:28:16 media kernel: [260151.910172] sd 11:0:0:1: [sdc] CDB: Read(10): 28 20 00 00 00 00 00 00 08 00 Jul 19 23:28:16 media kernel: [260151.910182] quiet_error: 2 callbacks suppressed Jul 19 23:28:16 media kernel: [260151.910570] xhci_hcd 0000:03:00.0: WARN: Stalled endpoint Jul 19 23:28:16 media kernel: [260151.911153] sd 11:0:0:1: [sdc] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE Jul 19 23:28:16 media kernel: [260151.911156] sd 11:0:0:1: [sdc] Sense Key : Illegal Request [current] Jul 19 23:28:16 media kernel: [260151.911159] Info fld=0x0 Jul 19 23:28:16 media kernel: [260151.911161] sd 11:0:0:1: [sdc] Add. Sense: Invalid field in cdb Jul 19 23:28:16 media kernel: [260151.911164] sd 11:0:0:1: [sdc] CDB: Read(10): 28 20 00 00 00 00 00 00 08 00 Jul 19 23:28:16 media kernel: [260151.911385] xhci_hcd 0000:03:00.0: WARN: Stalled endpoint Jul 19 23:28:16 media kernel: [260151.911902] sd 11:0:0:1: [sdc] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE Jul 19 23:28:16 media kernel: [260151.911905] sd 11:0:0:1: [sdc] Sense Key : Illegal Request [current] Jul 19 23:28:16 media kernel: [260151.911908] Info fld=0x0 Jul 19 23:28:16 media kernel: [260151.911910] sd 11:0:0:1: [sdc] Add. Sense: Invalid field in cdb Jul 19 23:28:16 media kernel: [260151.911913] sd 11:0:0:1: [sdc] CDB: Read(10): 28 20 00 00 00 00 00 00 08 00 Jul 19 23:28:16 media kernel: [260151.912128] xhci_hcd 0000:03:00.0: WARN: Stalled endpoint Jul 19 23:28:16 media kernel: [260151.912650] sd 11:0:0:1: [sdc] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE Jul 19 23:28:16 media kernel: [260151.912653] sd 11:0:0:1: [sdc] Sense Key : Illegal Request [current] Jul 19 23:28:16 media kernel: [260151.912656] Info fld=0x0 Jul 19 23:28:16 media kernel: [260151.912657] sd 11:0:0:1: [sdc] Add. Sense: Invalid field in cdb Jul 19 23:28:16 media kernel: [260151.912660] sd 11:0:0:1: [sdc] CDB: Read(10): 28 20 00 00 00 00 00 00 08 00 Jul 19 23:28:16 media kernel: [260151.912876] xhci_hcd 0000:03:00.0: WARN: Stalled endpoint Jul 19 23:28:16 media kernel: [260151.913439] sd 11:0:0:1: [sdc] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE Jul 19 23:28:16 media kernel: [260151.913442] sd 11:0:0:1: [sdc] Sense Key : Illegal Request [current] Jul 19 23:28:16 media kernel: [260151.913445] Info fld=0x0 Jul 19 23:28:16 media kernel: [260151.913446] sd 11:0:0:1: [sdc] Add. Sense: Invalid field in cdb Jul 19 23:28:16 media kernel: [260151.913449] sd 11:0:0:1: [sdc] CDB: Read(10): 28 20 00 00 00 00 00 00 08 00 Jul 19 23:28:16 media kernel: [260151.945227] xhci_hcd 0000:03:00.0: WARN: Stalled endpoint Jul 19 23:28:16 media kernel: [260151.945863] sd 11:0:0:1: [sdc] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE Jul 19 23:28:16 media kernel: [260151.945866] sd 11:0:0:1: [sdc] Sense Key : Illegal Request [current] Jul 19 23:28:16 media kernel: [260151.945870] Info fld=0x0 Jul 19 23:28:16 media kernel: [260151.945871] sd 11:0:0:1: [sdc] Add. Sense: Invalid field in cdb Jul 19 23:28:16 media kernel: [260151.945875] sd 11:0:0:1: [sdc] CDB: Read(10): 28 20 00 00 00 00 00 00 08 00 (...) and so on for like 10 seconds until it gives up (...) 3. Question So, my question would be: what is causing this? Am I missing something, should I configure things differently, is this a known limitation? Searching online for more information did not yield any useful results... Thank you in advance for any help!

  Read the article

< Previous Page | 13 14 15 16 17 18 19 20 21 22 23 24  | Next Page >