Search Results

Search found 736 results on 30 pages for 'uh yeah'.

Page 12/30 | < Previous Page | 8 9 10 11 12 13 14 15 16 17 18 19  | Next Page >

• Game programming : C# or C++?

  - by Chronix

  Ok so the faq says : "What language should I learn next? (Unless you have a specific requirement and don't know which language meets that requirement.)" so I guess this is not against the rules of questions. So, I've decided what I really want is to do Game Programming. So the question is, as a 18 years old who wants to learn self taught programming, what is the most suited programming language between C# and C++? ( I should state that I don't care about unix because I believe windows will be still the most used os ) I know the basics of C++, but none about C#. I know that C++ has more tutorials guides, dlls and stuff like that, while C# doesn't, but it's far easier to learn and to use for a single person to develop a program, but I've read even if the program is obfuscated it's easy to get the source of it. Well, I kinda want to focus on basic a lot first, I must say that I have a preference for C++ just because it feels more suitable to me, but I must consider that I work alone.. So even if I like it, it may not be the best thing to do. I am really not sure of which one to go for, i've read a lot of threads on various websites and it looks like C# is becoming more popular than C++. But yeah, that said, I also specified I want to do Game Programming. So I need to know some better points than just "C# is easier because of .net memory handling while C++ isnt" because I couldn't just find it. I hope the thread won't be closed because I've read the faq and I have a specific requirement. Thank you, and if you need more details you're free to ask me, but I think just by saying game programming and that I'd work alone should be enough!

  Read the article

• How to make Outlook Calendar reminders pop up in Windows 7

  - by thursdaysgeek

  I'm just starting to use Windows 7 and I want to know how to make my Outlook reminders pop up and show themselves. They keep opening discretely, quietly as just another Outlook entry on the taskbar. And I keep overlooking them, because they pop up behind everything else. How do I make them less easy to overlook? (Yeah, usually you don't want obnoxious apps that push themselves to the forefront. But there are a few places where I do want that, and Outlook calendar reminders are one of them.)

  Read the article

• Sharing Internet over Wireless Router

  - by Alandt

  I have a very strange question today - how do I share my dial up internet (yeah I know you are gonna say that is slow but broadband internet isn't available in my area), so dial up and 3G connection is all I got. I also have a Vodafone USB 3G modem that picks up 3G network, I am planning to use my Vodafone 3G modem in the day since I have free dial up internet from 7:00 pm in the night untill 7am the next morning. Some additional details: * My PC is running Windows XP Professional SP3 * I have a Sitecom Wireless Router 150N X1 WLR- 1000 I would appreciate it if anyone can provide me with a step-by-step guide! Thanks

  Read the article

• How can I cut a line in TextWrangler?

  - by Ian Henry

  Trying out TextWrangler since my TextMate trial is about to expire and I'm not sure it's worth the cash to keep using it. The main thing I'm missing is the ability to cut the entire line that the cursor is on without having to select it (which I could accomplish through a TextMate macro). Yeah, I can hit ?L ?X, but I'd like to map this sequence to ^X so I can do it purely with my left hand. Seems like this should be easy, but it's beyond me. What's the best way to get this functionality?

  Read the article

• Offsite Backup

  - by Grant Fritchey

  There was a recent weather event in the United States that seriously impacted our power grid and our physical well being. Lots of businesses found that they couldn’t get to their building or that their building was gone. Many of them got to do a full test of their disaster recovery processes. A big part of DR is having the ability to get yourself back online in a different location. Now, most of us are not going to be paying for multiple sites, but, we need the ability to move to one if needed. The best thing you can to start to set this up is have an off-site backup. Want an easy way to automate that? I mean, yeah, you can go to tape or to a portable drive (much more likely these days) and then carry that home, but we’ve all got access to offsite storage these days, SkyDrive, DropBox, S3, etc. How about just backing up to there? I agree. Great idea. That’s why Red Gate is setting up some methods around it. Want to take part in the early access program? Go here and try it out.

  Read the article

• Moving software RAID to Linux

  - by terman

  I'm using a RAID 1 (mirrored pair) configuration in my Media Center/ NAS system. Currently it's running Windows 8 (yeah, big mistake I know) and I'm regretting it (did it for the games, not worth it). Currently I'm having two software RAID 1s (3TB + 2TB) configured with Storage Spaces and unfortunately formatted with NTFS. Now I would like to switch to Fedora (or maybe Ubuntu if there are advantages) for good. Is there a way that I could continue using the disks as they are without the need to format them with ext or something? I'm glad for every tip. Oh, the system disk is of cause not in a raid configuration.

  Read the article

• Game programming : C# or C++?

  - by Chronix

  Ok so the faq says : "What language should I learn next? (Unless you have a specific requirement and don't know which language meets that requirement.)" so I guess this is not against the rules of questions. So, I've decided what I really want is to do Game Programming. So the question is, as a 18 years old who wants to learn self taught programming, what is the most suited programming language between C# and C++? ( I should state that I don't care about unix because I believe windows will be still the most used os ) I know the basics of C++, but none about C#. I know that C++ has more tutorials guides, dlls and stuff like that, while C# doesn't, but it's far easier to learn and to use for a single person to develop a program, but I've read even if the program is obfuscated it's easy to get the source of it. Well, I kinda want to focus on basic a lot first, I must say that I have a preference for C++ just because it feels more suitable to me, but I must consider that I work alone.. So even if I like it, it may not be the best thing to do. I am really not sure of which one to go for, i've read a lot of threads on various websites and it looks like C# is becoming more popular than C++. But yeah, that said, I also specified I want to do Game Programming. So I need to know some better points than just "C# is easier because of .net memory handling while C++ isnt" because I couldn't just find it. I hope the thread won't be closed because I've read the faq and I have a specific requirement. Thank you, and if you need more details you're free to ask me, but I think just by saying game programming and that I'd work alone should be enough!

  Read the article

• Reason why Windows can't be installed on Ubuntu , Any Help though?

  - by Terzuz

  Well I got my Windows Vista .iso file , I put it on my USB Drive , Extracted , Then I restarted and went to "Boot Device Options" Clicked "Generic USB" (What I labeled when I formatted) Then it stood on a black screen for 15 minutes , Then just went to Ubuntu , Now I found out exactly what happened Why Windows WONT work on Ubuntu is a simple reason Not if you save it in NFTS Format or MSDOS (Both Windows Formats) , Not if you use anything special , This even applies to the Ubuntu downloader , One specific reason that I just noticed , Since WINE (Windows Application Loader) can't run while you click the USB , You can't open the Setup.exe file needed to install the Operating System , That means you can not install it at all if it is a .exe installer file , Then what can we do? Only other way is to make a partition with GParted , Put a partition , then install WINE , Then run your Windows Setup.exe file , Then Wine will load it up! Why not to open Setup.exe before you make a partition - Simple , It WONT WORK! I have tried , It says you need __ Amount of space and can be put on any partition , Yeah , Any partition NOT BEING USED Here is where I need your help! - I want to make a partition but they all show as locked when I open GParted , So How am I supposed to open them up? Get a hammer and tell HP my laptop didn't want to open its partitions? Nope , I need some help on how to unlock the partitions or what to do , Thank you in advance PS- If I could , I would put a bounty to this but I do not have enough reputation!

  Read the article

• nautilus will not start, no right click menu, apps will not run due to 64bit libicui18n.so.48 overwritten with 32bit, ubuntu 12.04

  - by Dewb

  yeah so i broke my system trying to install support for 32bit apps. Somehow the 32bit set of libicu*.so.48 files replaced my 64bit files and now nothing works. I know what the problem is and how to fix it , what i need is some help. I need some kind soul running a 64bit install of Ubuntu 12.04 to simply go into their /usr/lib dir and copy the files that have the form libicu*.so.48* (8 of them i think, maybe 16 i dunno how many there is supposed to be since they were overwritten). Anyway if you could put those files in an archive, zip or tar preferred and then email/share the link. I was able to get these files installed but they're from the latest edition of fedora and while i can now use my computer , it's not that stable things don't start right smoothly every time like they used to .... and well its a simple ordeal to put things back the way they were if someone wouldn't mind helping out. also any help setting up the libraries related to 32bit apps would be great as well as i apparently screwed that up royally. Thanks for any help or advice

  Read the article

• Access Rails under /app/, not /app/public/

  - by blinry

  I'm trying to deploy Rails 2.1.2 with Apache 2.2.10 and FastCGI (yeah, bad, ancient, ugly, I know). My application can be accessed via example.com/app/public/, but I want to access it via example.com/app/. In my .htaccess-File (in the app/-directory!) I have: RewriteEngine On RewriteBase /app/ RewriteCond %{REQUEST_FILENAME} !-f RewriteRule ^(.*)$ public/dispatch.fcgi [QSA,L] How can I forward each request going to app/ to app/public/? Every time I try this (like, with RewriteRule ^.*$ public/$1 [QSA]) I get a routing error: No route matches "/app/" with {:method=>:get} Help?

  Read the article

• Freeze during Battlefield 3 - Probable Hardware issue?

  - by HendsteR

  my friend's notebook frequently freezes during BF3 sessions since ~1 1/2 months. It runs Win764Bit and he already reinstalled windows during the process, it didn't help. So we guess it might probably be a hardware issue. Now the question - which part of the hardware could effect a total freeze of the system WITHOUT getting a bluescreen? Or are there any known software issues he could also try? The hardware specs are: Acer 7745G Intel i7 720QM AMD Mobility 5850HD - Running Catalyst 11.6 now btw. (all drivers tested from 11.2 to 12.6 though) 4GB Ram 1.333MHz Oh and yeah, he just added that it crashes playing Diablo3 from time to time, too. Please help :)

  Read the article

• How to structure reading of commands given at a(n interactive) CLI prompt?

  - by Anto

  Let's say I have a program called theprogram (the marketing team was on strike when the product was to be named). I start that program by typing, perhaps not surprisingly, the program name as a command into a command prompt. After that, I get into a loop (from the users standpoint, an interactive command-line prompt), where one command will be read from the user, and depending on what command was given, the program will execute some instructions. I have been doing something like the following (in C-like pseudocode): main_loop{ in=read_input(); if(in=="command 1") do_something(); else if(in=="command 2") do_something_else(); ... } (In a real program, I would probably encapsulate more things into different procedures, this is just an example.) This works well for a small amount of commands, but let's say you have 100, 1000 or even 10 000 of them (the manual would be huge!). It is clearly a bad idea to have 10 000 ifs and else ifs after each other, for instance, the program would be hard to read, hard to maintain, contain a lot of boilerplate code... Yeah, you don't want to do that, so what approach would you recommend me to use (I will probably never use 10 000 commands in a program, but the solution should, at least preferably, be able to scale to that kind of massive (?) problems. The solution doesn't have to allow for arguments to the commands)?

  Read the article

• How to recover lost files after an install

  - by Gentry McColm

  I'm a newbie learning along the way. I recently installed a 2nd hdd into my ubuntu box. Have one of about 160g which runs ubuntu 12.04. And the new hdd was 1 tb, used for holding videos. I had set up 2nd drive as ext3 I believe. And set up folders on it to hold the videos. Worked great. Also thought I had set it up for auto mount. I was able to read and write on it. Etc. Computer froze, so had to reboot it. When I did, system would not reboot: hung on the Ubuntu screen with 5 dots. I hit a few buttons and the command screen showed up, indicating that my 2nd hdd would not mount. Stopped up whole system. Tried rebooting, no go. Had to reinstall ubuntu on the 1st hdd. Did not apparently touch the 2nd one. Well, when I got it up and running, my 2nd hdd mounted automatically (yeah!), but now I cannot find my videos I already had on it. I had not put any more than about 30g of videos on it, but now when I read its Properties, it says I'm using about 50g. So, I'm wondering if somewhere in that, buried, are my 17 videos. Any help in recovering this? Thanks!

  Read the article

• Connecting two IPs like an URL

  - by czesuaf

  I haven't found answer anywhere, so here comes the question. My ISP connected me to a router with thousands of other clients, so my public IP is the same as many others. And I want to make a small private server which can be accessible across whole web. So my home router shows me IP 10.x.x.x and actually my public IP is 89.x.x.x. Is there any way to reach the IP 10.x.x.x from the Internet? Yeah I thought the same about IPv6 but it's still not accessible for me ;[

  Read the article

• No root account

  - by user107744

  Okay, here's my problem. I was being an idiot and installed compiz-core on my Xubuntu 12.10. So there I was, trying to figure out how to fix my issue, and I did sudo xfwm4 --replace. Then I was unable to login. So I logging with guest, delete my old account, without deleting the home folder, of course, and I create a new account "michael2". Instead of creating a new home folder for it, I instead instructed the program to use my old home folder. Unfortunately, it completely erased the folder, along with over 150GB worth of downloads and about 200 hours worth of work (I work from home, so, yeah). And to top it all off, whenever I try to use the sudo command, I get the error michael2 is not in the sudoers file. This incident will be reported. I don't know how to fix this, nor can I login to root (I never set the root password, because I never had the need to login as root to do anything). Any help will be appreciated. Is there maybe a way that I can do system restore to restore my previous files and username? I need answers as soon as possible, because I'm literally losing money by the second (the entire work from home kinda thing).

  Read the article

• Configuring VirtualBox host only networking: OSX host, Ubuntu guest

  - by Greg K

  I have a Ubuntu guest configured with two interfaces, eth0 is using NAT and works fine, I can access the net. The second interface eth1 is set to host only networking and VirtualBox has created a vboxnet0 virtual adapter on the host. I've configured vboxnet0 in VirtualBox adapter settings with the following: ip 192.168.21.20 subnet 255.255.255.0 Once the VM guest is running, ifconfig on OSX has vboxnet0 setup as: vboxnet0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500 ether 0a:00:27:00:00:00 inet 192.168.21.20 netmask 0xffffff00 broadcast 192.168.21.255 In the guest, eth0 is set to use DHCP, I've statically assigned eth1 to 192.168.21.20 (is this a mistake?): auto eth1 iface eth1 inet static address 192.168.21.20 netmask 255.255.255.0 network 192.168.21.0 broadcast 192.168.21.255 gateway 192.168.21.1 There is no device on 192.168.21.1 - what should I set my gateway to? In the guest the routes look like so: Destination Gateway Genmask Flags Metric Ref Use Iface 192.168.21.0 * 255.255.255.0 U 0 0 0 eth1 10.0.2.0 * 255.255.255.0 U 0 0 0 eth0 default 10.0.2.2 0.0.0.0 UG 100 0 0 eth0 default 192.168.21.1 0.0.0.0 UG 100 0 0 eth1 Route table on OSX: $ netstat -nr Routing tables Internet: Destination Gateway Flags Refs Use Netif Expire default 10.77.36.1 UGSc 28 0 en1 10.77.36/22 link#5 UCS 5 0 en1 10.77.39.38 127.0.0.1 UHS 1 2236 lo0 10.77.39.255 link#5 UHLWbI 1 66 en1 127 127.0.0.1 UCS 0 0 lo0 127.0.0.1 127.0.0.1 UH 1 8642 lo0 169.254 link#5 UCS 0 0 en1 192.168.21 link#7 UC 2 0 vboxnet 192.168.21.20 a:0:27:0:0:0 UHLWI 0 4 lo0 192.168.21.255 link#7 UHLWbI 2 64 vboxnet I can't SSH from the host to the guest (I used to be able to when the VM was configured with a bridged connection): $ ssh 192.168.21.20 ssh: connect to host 192.168.21.20 port 22: Connection refused What have I done wrong here? TIA

  Read the article

• setting up synergy (multi-computer shared input devices) new to mac

  - by pedalpete

  I've just gotten a mac and the first thing I'm trying to do in setting it up for dev is to set-up synergy. I've run into countless issues, and am making progress, but that 'mac's just work' theory is getting tired really fast. I'd prefer running the mac as the server, as it's a desktop. why use my pc(laptop) as the server. So i downloaded synergy, and tried to edit the 'synergy.conf' file. First with textmate, then with apple script. Neither of these applications will open the file. Even after changing textmate to use plain text format and switching off a few other things to make it into a plain text editor. No good. Uh, isn't that what these script/text editors are for? Then I found SyneryKM which is a package to run synergy on osx. Took LOTS of fiddling, but I think I finally kinda got it figured out. I've got my pc & mac both running synergy. However, my pc will only connect to synergy using the ip address. No problem, however, my mac won't connect to itself as a synergy server using the IP address. If I use the ip address as a screen in the 'server configuration file', i get a 'Error: unknown screen name mymac'. I know this shouldn't be super complicated, and possibly not the place to find answers about synergy, but I couldn't find a better place, and there has been some talk of synergy here. Any chance somebody can help with this?

  Read the article

• Secondary IP (eth0:0) acts like main server IP

  - by George Tasioulis

  I have a CentOS server, configured with 4 consecutive IPs: eth0 5.x.x.251 eth0:0 5.x.x.252 eth0:1 5.x.x.253 eth0:2 5.x.x.254 The problem is that all traffic goes out to the internet with eth0:0 (5.x.x.252) as the source IP, instead of eth0. # curl ifconfig.me 5.x.x.252 How can I fix this, so that all traffic goes out via eth0, ie my main IP? PS: My server is VPS running on a Xen dom0, the latter being configured in routed mode networking. Thanks in advance! Server configuration # ifconfig eth0 Link encap:Ethernet HWaddr 00:x:x:x:x:AE inet addr:5.x.x.251 Bcast:5.x.x.255 Mask:255.255.255.255 inet6 addr: fe80::x:x:x:x/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:14675569 errors:0 dropped:0 overruns:0 frame:0 TX packets:9463227 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:4122016502 (3.8 GiB) TX bytes:25959110751 (24.1 GiB) Interrupt:23 eth0:0 Link encap:Ethernet HWaddr 00:x:x:x:x:AE inet addr:5.x.x.252 Bcast:5.x.x.255 Mask:255.255.255.224 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 Interrupt:23 eth0:1 Link encap:Ethernet HWaddr 00:x:x:x:x:AE inet addr:5.x.x.253 Bcast:5.x.x.255 Mask:255.255.255.224 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 Interrupt:23 eth0:2 Link encap:Ethernet HWaddr 00:x:x:x:x:AE inet addr:5.x.x.254 Bcast:5.x.x.255 Mask:255.255.255.224 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 Interrupt:23 # cat /etc/hosts 127.0.0.1 localhost.localdomain localhost 5.x.x.251 [fqdn] [hostname] # cat ifcfg-eth0 DEVICE=eth0 BOOTPROTO=static ONBOOT=yes IPADDR=5.x.x.251 NETMASK=255.255.255.224 SCOPE="peer 5.x.y.82" # cat ifcfg-eth0:0 DEVICE=eth0:0 BOOTPROTO=static ONBOOT=yes IPADDR=5.x.x.252 NETMASK=255.255.255.224 # cat route-eth0 ADDRESS0=0.0.0.0 NETMASK0=0.0.0.0 GATEWAY0=5.x.y.82 # netstat -rn Kernel IP routing table Destination Gateway Genmask Flags MSS Window irtt Iface 5.x.y.82 0.0.0.0 255.255.255.255 UH 0 0 0 eth0 5.x.x.224 0.0.0.0 255.255.255.224 U 0 0 0 eth0 169.254.0.0 0.0.0.0 255.255.0.0 U 0 0 0 eth0 0.0.0.0 5.x.y.82 0.0.0.0 UG 0 0 0 eth0

  Read the article

• Debian/OVH: How to configure multiple Failover IP on the same Xen (Debian) Virtual Machine?

  - by D.S.

  I have a problem on a Xen virtual machine (running latest Debian), when I try to configure a second failover IP address. OVH reports that my IP is misconfigured and they complaint they receive a massive quantity of ARP packets from this IPs, so they are going to block my IP unless I fix this issue. I suspect there's a routing issue, but I don't know (and can't find any useful info on the provider's website, and their support doesn't provide me a valid solution, just bounce me to their online - useless - guides). My /etc/network/interfaces look like this: # The loopback network interface auto lo iface lo inet loopback # The primary network interface auto eth0 iface eth0 inet static address AAA.AAA.AAA.AAA netmask 255.255.255.255 broadcast AAA.AAA.AAA.AAA post-up route add 000.000.000.254 dev eth0 post-up route add default default gw 000.000.000.254 dev eth0 # Secondary NIC auto eth0:0 iface eth0:0 inet static address BBB.BBB.BBB.BBB netmask 255.255.255.255 broadcast BBB.BBB.BBB.BBB And the routing table is: Kernel IP routing table Destination Gateway Genmask Flags Metric Ref Use Iface 000.000.000.254 0.0.0.0 255.255.255.255 UH 0 0 0 eth0 0.0.0.0 000.000.000.254 0.0.0.0 UG 0 0 0 eth0 In these examples (true IP addresses are replaced by fake ones, guess why :)), 000.000.000.000 is my main server's IP address (dom0), 000.000.000.254 is the default gateway OVH recommends, AAA.AAA.AAA.AAA is the first IP Failover and BBB.BBB.BBB.BBB is the second one. I need both AAA.AAA.AAA.AAA and BBB.BBB.BBB.BBB to be publicly reachable from Internet and point to my domU, and to be able to access Internet from inside the virtual machine (domU). I am using eth0 and eth0:0 because due to OVH support, I have to assign both IPs to the same MAC address and then create a virtual eth0:0 interface for the second IP. Any suggestion? What am I doing wrong? How can I stop OVH complaining about ARP flood? Many thanks in advance, DS

  Read the article

• How can I use two Internet connections in Ubuntu?

  - by Martin

  My goal is to be able to do something like this: curl google.com --interface ppp0 curl google.com --interface p2p2 ppp0 is a DSL connection, and p2p2 is a separate direct Internet connection. Currently I can only get one of these to work at a time. When I enable one, the other one stops working. /etc/network/interfaces: # The loopback network interface auto lo iface lo inet loopback # DSL auto p2p1 iface p2p1 inet manual auto dsl-provider iface dsl-provider inet ppp pre-up /sbin/ifconfig p2p1 up # line maintained by pppoeconf provider dsl-provider # DIRECT auto p2p2 iface p2p2 inet dhcp ifconfig: lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:65536 Metric:1 p2p1 Link encap:Ethernet inet6 addr: fe80::20a:ebff:fe21:99c6/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 p2p2 Link encap:Ethernet inet addr:192.168.1.101 Bcast:192.168.1.255 Mask:255.255.255.0 inet6 addr: fe80::20a:ebff:fe17:1249/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 ppp0 Link encap:Point-to-Point Protocol inet addr:53.193.231.167 P-t-P:53.193.224.1 Mask:255.255.255.255 UP POINTOPOINT RUNNING NOARP MULTICAST MTU:1492 Metric:1 route -n Kernel IP routing table Destination Gateway Genmask Flags Metric Ref Use Iface 0.0.0.0 0.0.0.0 0.0.0.0 U 0 0 0 ppp0 10.0.10.0 0.0.0.0 255.255.255.0 U 0 0 0 eth2 53.193.224.1 0.0.0.0 255.255.255.255 UH 0 0 0 ppp0 192.168.1.0 0.0.0.0 255.255.255.0 U 0 0 0 p2p2 By default, only ppp0 works. If I run "route add default gw 192.168.1.1 p2p2" then I can use p2p2 but ppp0 stops working. If I then run "route add default gw 53.193.224.1 ppp0" then I can use ppp0 again but p2p2 stops working. What can I do to be able to use both interfaces selectively?

  Read the article

• Change OpenVZ route to pass through ip failover

  - by Kevin Campion

  I have one dedicaced server with its own IP and another IP (failover) who refer to the first. I will wish to change the gateway of a Proxmox virtual machine (openvz) who runs on this dedicaced server to go through the failover IP rather than the ip of host main server. Once connected to a virtual machine, when I do a traceroute VE# traceroute www.google.fr traceroute to www.google.fr (209.85.229.104), 30 hops max, 60 byte packets 1 MY_SERVER_NAME.ovh.net (xxx.xxx.xxx.xxx FIRST_IP_MAIN_SERVER) 0.021 ms 0.010 ms 0.009 ms The first line tells me the ip of host main server. I would like that the traceroute display the second IP failover. VE# route Kernel IP routing table Destination Gateway Genmask Flags Metric Ref Use Iface 192.0.2.1 * 255.255.255.255 UH 0 0 0 venet0 default 192.0.2.1 0.0.0.0 UG 0 0 0 venet0 With iptables HOST# iptables -t nat -L Chain POSTROUTING (policy ACCEPT) target prot opt source destination MASQUERADE all -- anywhere anywhere MASQUERADE all -- anywhere anywhere SNAT tcp -- anywhere 10.10.101.2 tcp dpt:www state NEW,RELATED,ESTABLISHED,UNTRACKED to:SECOND_IP_FAILOVER SNAT all -- 10.10.101.2 anywhere to:SECOND_IP_FAILOVER 10.10.101.2 is the virtual machine IP (interface venet0) Any ideas ?

  Read the article

• Natting trafic from a tunnel to internet

  - by mezgani

  I'm trying to set up a GRE tunnel between a linux box and a router (LAN), and I'm having a few problems which seem to depend to my iptables configuration. Watching with tcpdump on linux box, I can see packets coming with flags GREv0, all i need right know is forwarding this data to internet, found here some trace : iptables -F iptables -X iptables -P INPUT ACCEPT iptables -P FORWARD ACCEPT iptables -P OUTPUT ACCEPT iptables -t nat -F iptables -t nat -X iptables -t nat -P PREROUTING ACCEPT iptables -t nat -P POSTROUTING ACCEPT iptables -t nat -P OUTPUT ACCEPT iptables -t mangle -F iptables -t mangle -X iptables -t mangle -P PREROUTING ACCEPT iptables -t mangle -P OUTPUT ACCEPT iptables -A INPUT -p 47 -j ACCEPT iptables -A FORWARD -i ppp0 -o cloud -j ACCEPT iptables -A FORWARD -i cloud -o ppp0 -j ACCEPT iptables -A FORWARD -m state --state ESTABLISHED,RELATED -j ACCEPT iptables -t nat -A POSTROUTING -o ppp0 -j MASQUERADE echo "1" /proc/sys/net/ipv4/ip_forward cloud Link encap:UNSPEC HWaddr C4-CE-7A-2E-F2-BF-DD-C0-00-00-00-00-00-00-00-00 inet adr:10.3.3.3 P-t-P:10.3.3.3 Masque:255.255.255.255 UP POINTOPOINT RUNNING NOARP MTU:1476 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:124 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 lg file transmission:0 RX bytes:0 (0.0 B) TX bytes:10416 (10.1 KiB) Table de routage IP du noyau Destination Passerelle Genmask Indic MSS Fenêtre irtt Iface 196.206.120.1 0.0.0.0 255.255.255.255 UH 0 0 0 ppp0 192.168.0.0 0.0.0.0 255.255.255.0 U 0 0 0 eth0 10.3.3.0 0.0.0.0 255.255.255.0 U 0 0 0 cloud 0.0.0.0 196.206.120.1 0.0.0.0 UG 0 0 0 ppp0 root@aldebaran:~# ip route 196.206.120.1 dev ppp0 proto kernel scope link src 196.206.122.46 192.168.0.0/24 dev eth0 proto kernel scope link src 192.168.0.18 10.3.3.0/24 dev cloud scope link default via 196.206.120.1 dev ppp0

  Read the article

• Solaris 10: cannot ping to/from server

  - by anurag kohli

  All, I have a Solaris 10 server which is not reachable by IP (ie can't ping to/from the server). I believe I have the default route setup correctly. See below: # ifconfig -a lo0: flags=2001000849<UP,LOOPBACK,RUNNING,MULTICAST,IPv4,VIRTUAL> mtu 8232 index 1 inet 127.0.0.1 netmask ff000000 bge0: flags=1000843<UP,BROADCAST,RUNNING,MULTICAST,IPv4> mtu 1500 index 2 inet 192.168.62.100 netmask ffffff00 broadcast 192.168.62.255 ether 0:14:4f:b1:9b:30 # netstat -rn Routing Table: IPv4 Destination Gateway Flags Ref Use Interface -------------------- -------------------- ----- ----- ------ --------- 192.168.62.0 192.168.62.100 U 1 40 bge0 224.0.0.0 192.168.62.100 U 1 0 bge0 default 192.168.62.1 UG 1 0 127.0.0.1 127.0.0.1 UH 1 4 lo0 # # cat /etc/defaultrouter 192.168.62.1 I have verified layer1 and layer 2 are up on the switchport, and that it's on the correct VLAN. I have also checked the default gateawy (192.168.62.1) is in fact reachable since I can ping it from my PC: Pinging 192.168.62.1 with 32 bytes of data: Reply from 192.168.62.1: bytes=32 time=1ms TTL=254 Reply from 192.168.62.1: bytes=32 time=1ms TTL=254 Reply from 192.168.62.1: bytes=32 time=3ms TTL=254 Reply from 192.168.62.1: bytes=32 time=6ms TTL=254 I'm at a loss as to what is wrong. I would highly appreciated your assistance. Thank you very much.

  Read the article

• Change the order of IP addresses returned by ifconfig?

  - by erikcw

  I have an Ubuntu server with several IP addresses attached to it. 127.0.0.1 is listed as venet0 by ifconfig. I'm using Chef to configure the server. The problem is that chef is listing 127.0.0.1 as the IP address for the server instead of one of the server's "real" IPs. (apparent "ohai ipaddress" uses the first IP listed by ifconfig to determine the server's IP). How can I change the order so the servers main IP is listed first instead of the 127.0.0.1? Can venet0 be deleted and venet0:0 be "promoted" to take its place since 127.0.0.1 is already listed in the "lo" interface? lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:334 errors:0 dropped:0 overruns:0 frame:0 TX packets:334 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:16700 (16.7 KB) TX bytes:16700 (16.7 KB) venet0 Link encap:UNSPEC HWaddr 00-00-00-00-00-00-00-00-00-00-00-00-00-00-00-00 inet addr:127.0.0.1 P-t-P:127.0.0.1 Bcast:0.0.0.0 Mask:255.255.255.255 UP BROADCAST POINTOPOINT RUNNING NOARP MTU:1500 Metric:1 RX packets:7622207 errors:0 dropped:0 overruns:0 frame:0 TX packets:8183436 errors:0 dropped:1 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:2102750761 (2.1 GB) TX bytes:2795213667 (2.7 GB) venet0:0 Link encap:UNSPEC HWaddr 00-00-00-00-00-00-00-00-00-00-00-00-00-00-00-00 inet addr:XXX.XXX.XXX.XX1 P-t-P:XXX.XXX.XXX.XX1 Bcast:0.0.0.0 Mask:255.255.255.255 UP BROADCAST POINTOPOINT RUNNING NOARP MTU:1500 Metric:1 venet0:1 Link encap:UNSPEC HWaddr 00-00-00-00-00-00-00-00-00-00-00-00-00-00-00-00 inet addr:XXX.XXX.XXX.XX2 P-t-P:XXX.XXX.XXX.XX2 Bcast:0.0.0.0 Mask:255.255.255.255 UP BROADCAST POINTOPOINT RUNNING NOARP MTU:1500 Metric:1 route -n route -n Kernel IP routing table Destination Gateway Genmask Flags Metric Ref Use Iface 192.0.2.1 0.0.0.0 255.255.255.255 UH 0 0 0 venet0 0.0.0.0 192.0.2.1 0.0.0.0 UG 0 0 0 venet0

  Read the article

• Connect linux server to VPN server via PPTP

  - by wowpatrick

  I'm trying to connect a Linux (Ubuntu 10.04 LST) server to a VPN server via the PPTP client to an VPN server. I configured the PPTP client as said in the documentation. The connection is correctly added as an interface, but somehow the connection dose not work. ping -I ppp0 google.com dose not return anything and traceroute -i ppp0 only shows the first hop, and then displays nothing. Any ideas of what is going wrong? Incorrect routing configuration? ifconfig output for the configured interface: ppp0 Link encap:Point-to-Point Protocol inet addr:xx.x.xxx.xxx P-t-P:10.0.0.1 Mask:255.255.255.255 UP POINTOPOINT RUNNING NOARP MULTICAST MTU:1496 Metric:1 RX packets:415 errors:0 dropped:0 overruns:0 frame:0 TX packets:468 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:3 RX bytes:31428 (31.4 KB) TX bytes:32394 (32.3 KB) route output Kernel IP routing table Destination Gateway Genmask Flags Metric Ref Use Iface xx.x.x.1 * 255.255.255.255 UH 0 0 0 ppp0 xx.xxx.xxx.xx sp.ip 255.255.255.255 UGH 0 0 0 eth1 192.168.3.0 * 255.255.255.0 U 0 0 0 eth2 192.168.2.0 * 255.255.255.0 U 0 0 0 eth1 default sp.ip 0.0.0.0 UG 100 0 0 eth1

  Read the article

< Previous Page | 8 9 10 11 12 13 14 15 16 17 18 19  | Next Page >