Search Results

Search found 11003 results on 441 pages for 'usb storage'.

Page 12/441 | < Previous Page | 8 9 10 11 12 13 14 15 16 17 18 19  | Next Page >

• Accessing hardware via USB by proprietary windows software using Wine

  - by Carlos Eugenio Thompson Pinzón

  I have this proprietary software that access some hardware using USB. Over a year ago I tried to install it on a Ubuntu OS using Wine (the program is written for Windows). The UI seemed to work just fine but it had no access to the USB port. Back then I had to license a Windows copy in order to get the job done. Now, that Windows version we where using is deprecated and it is not longer available and available versions cost trice as much. So it is time to give Linux another try. How can I ensure that the USB is available for a Wine application? Neither the application nor the hardware install any driver, the app just pool all available USB drivers and make a handshake if it recognizes that the hardware is present. I want to minimize the test cases before abandoning Linux one more time. Update I've just tried again (with the hope an upgrade was made from last year), and it is not working. The proprietary windows app is not finding the hardware.

  Read the article

• One of the partion on a usb harddisk cannot automount

  - by holmescn

  It is a very strange problem. My usb harddisk has four partitions, one is primary, the other three are logical (contained within an extended partition). When I plug in the disk, three of the partitions are mounted automatically except one--the first logical partition in the extended partition. Initially I thought it is the problem of system (at that time I used Mint). But after I change to Ubuntu 12.04, the problem wasn't solved. I don't want to add a rule in fstab, and I want to know what happened. The disk is fine, and the partition can be accessed in Windows and mounted manually. result of dmesg | tail: [100933.557649] usb 2-1.2: new high-speed USB device number 4 using ehci_hcd [100933.651891] scsi8 : usb-storage 2-1.2:1.0 [100934.649047] scsi 8:0:0:0: Direct-Access SAMSUNG PQ: 0 ANSI: 0 [100934.650963] sd 8:0:0:0: Attached scsi generic sg2 type 0 [100934.651342] sd 8:0:0:0: [sdb] 625142448 512-byte logical blocks: (320 GB/298 GiB) [100934.651977] sd 8:0:0:0: [sdb] Write Protect is off [100934.651989] sd 8:0:0:0: [sdb] Mode Sense: 03 00 00 00 [100934.652836] sd 8:0:0:0: [sdb] No Caching mode page present [100934.652848] sd 8:0:0:0: [sdb] Assuming drive cache: write through [100934.655354] sd 8:0:0:0: [sdb] No Caching mode page present [100934.655367] sd 8:0:0:0: [sdb] Assuming drive cache: write through [100934.734652] sdb: sdb1 sdb3 < sdb5 sdb6 sdb7 > [100934.737706] sd 8:0:0:0: [sdb] No Caching mode page present [100934.737725] sd 8:0:0:0: [sdb] Assuming drive cache: write through [100934.737731] sd 8:0:0:0: [sdb] Attached SCSI disk result of parted -l: Model: SAMSUNG (scsi) Disk /dev/sdb: 320GB Sector size (logical/physical): 512B/512B Partition Table: msdos Number Start End Size Type File system Flags 1 32.3kB 21.5GB 21.5GB primary ntfs 3 21.5GB 320GB 299GB extended lba 5 21.5GB 129GB 107GB logical ntfs 6 129GB 236GB 107GB logical ntfs 7 236GB 320GB 83.8GB logical ntfs

  Read the article

• Trouble installing Pokerstars on a Live USB without Persistence through WINE

  - by Ricky Foster

  I need to install any form of Texas Hold Em' on a Lubuntu Live USB that doesn't have persistence. I was able to download PokerStars.net by emulating the .exe (a windows type file) using WINE for Linux (Lubuntu). But, when I try to install, I have no room. The only place on the Live USB is in the root folder which is set to read-only. Is there any way I can change the read only properties of the Live USB while it's in use? So, to recap. I am running Lubuntu 13.04 and can't start in Persistent mode. When I start normally everything worked fine. I proceeded to Chromium and successfully downloaded Wine and the Pokerstars.exe. I right clicked the downloaded fiel then clicked Wine, the installer loaded fine. There are about 8 different disk icons and only the one containing system files is active. Is there any way I can use the terminal to install it to Root. Thanks in advance for your answer/alternate method (without having to buy another USB to install it to).

  Read the article

• USB flash module giving errors

  - by vshenoy

  Hi, I have a SATA USB flash module which was earlier running a 2.4 linux kernel (2.4.36.6) and on which now I am trying to install ubuntu server 10.04.1 LTS. I have two such USB flash modules and on one of them the installation process itself giving these errors: sd 4:0:0:0 [sda] Device not ready sd 4:0:0:0 [sda] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE sd 4:0:0:0 [sda] Sense Key : Not Ready [current] sd 4:0:0:0 [sda] Add. Sense: Medium not present sd 4:0:0:0 [sda] CDB: Write(10): 2a 00 00 05 48 02 00 00 04 00 end_request: I/O error, dev sda, sector 46114 usb 1-1: reset high speed USB device using ehci_hcd and address 2 Buffer I/O error on device sda1, logical block 172033 lost page write due to I/O error on sda1 Buffer I/O error on device sda1, logical block 172034 lost page write due to I/O error on sda1 on the other the installation is successful, but after a day or two of running the machine hangs because of kernel spewing these messages: Remounting filesystem read-only EXT2-fs error (device sda1): read_block_bitmap: Cannot read block [bitmap - block_group = 105, block_bitmap = 860161] EXT2-fs error (device sda1): ext2_get_inode: unable to read inode block - inode=13083, block=24683 ext2_free_inode: bit already cleared for inode 83966 and the machine needs to be hard rebooted. On both the systems SCSI emulation with usb_storage driver is being used to detect the module. Here is the output of /proc/scsi/scsi on 2.4: # cat /proc/scsi/scsi Attached devices: Host: scsi0 Channel: 00 Id: 00 Lun: 00 Vendor: TS Model: UFM Rev: 1100 Type: Direct-Access ANSI SCSI revision: 02 and on 2.6: # cat /proc/scsi/scsi Attached devices: Host: scsi6 Channel: 00 Id: 00 Lun: 00 Vendor: TS Model: UFM Rev: 1100 Type: Direct-Access ANSI SCSI revision: 00 i.e. only 'ANSI SCSI revision:' is shown as different, although I am not sure if this can cause any problem. Really appreciate if someone can point as to how to debug this issue or any mailing list where I can further ask questions about this.

  Read the article

• Ubuntu Tools for recovering data from damaged USB Flash Drive ~ 10 Gb

  - by PREDA LUCIAN

  I have technical issues with my USB Flash Drive - JetFlash®V15 (TS16GJFV15) It's very critical situation because I can not see the data from it and I should get a way to recover them ASAP. So, in general, I have connected Non-stop that USB Flash Disk at my laptop. Was appear Power surges and when I was coming back, I saw that problem with it. Details regarding JetFlash®V15 (in present): - when I connect it on USP slot, the led is working intermittent and later on remain with constant light. - if I inspect the computer drivers, I found "Generic USB Flash Disk" (when the stick it's connected). - if I inspect "Properties", I can see next details: --- Type: unknown (application/octet-stream) --- Size: unknown --- Volume: unknown --- Accessed: unknown --- Modified: unknown I inspected that stick on 2 different computers (as well in different different USB Ports) and was the same problem, I can not see the content. I was checking with Windows 7 and Ubuntu 10.04 OS, but without success. With both OS was working before this issue. I'll appreciate an answer which will solve the problem, not an answer which will certify the problem. What I have to do, to recover the information form it (nearly 10 Gb)? I'm looking forward to be guided from a technical expert.

  Read the article

• Why is my USB data transfer so slow?

  - by Dave M G

  Whenever I do any kind of file transfer using USB, whether to a USB stick, or with my Android phone, or anything else, it is ridiculously slow. It says 59.8 KB/sec, which would be an awesome speed if this were 1991 and I was using a modem to dial up to my local BBS. Surely USB technology is better than that...? 37 seconds to move less data than the equivelent of 1 MP3 file? Also, regardless of what it says about speed and time, the reality is much, much slower. I routinely see it say something like "37 seconds left" and have to wait for minutes. Sometimes, if I want to move large amounts of files, it can say it will take 8 hours or more. Is this normal? My computer may not be the most awesome on the market, and about a year old, but it's an i5 with 4GB RAM and modern components, so surely this isn't the hardware's fault. What can I do to get better USB data transfer performance? Also, I did look at this question, but my newbie eyes don't see anything that look like an actual solution, just a lot of discussion about what transfer rates could or should be. Update: As requested in the comments, I've generated a whole bunch of output from the command line, and put it on Ubuntu Pastebin. Please see it here.

  Read the article

• Recommendations for USB flash drive fast at writing small files

  - by Andrew Bainbridge

  I want a drive that I can be used as my work drive, storing a Subversion repo and sandbox for a small project. I'd also like it to be able to store a DVD rip. At the moment I've got a Super Talent pico-C 8gb. It's fast at reading and writing DVD rips, but the performance on small files (ie less than 4k) is utterly terrible (we're talking floppy disk speeds here). This Ars review measured a similar Super Talent drive and pretty much confirmed my measurements (take a look at the random write speeds on page 5). So, I'm looking for a 8gb or bigger drive that doesn't suck at read and write of small files and still has acceptable performance for very large files.

  Read the article

• Help me with CDMA usb modem (How to change storage mode to modem mode)

  - by user98698

  My modem isn't in the device list of usb_modeswitch.... so I cannot automatically use the modem on the ubuntu.... I found the way to change the modem from usb storage mode to modem mode and I can use my modem. But I forgot the instructions. I don't know the modem's name. It's chinese modem. But here is vendor/product id ....05 Qualcomm, Inc. Mass Storage Device and I think the target vendor/product id is ..... 05. So help me to change. I don't want to replace modem. pls. Sorry for my english....

  Read the article

• Why are USB 2.0 devices crashing my system?

  - by BenAlabaster

  Background on the machine I'm having a problem with: The machine was inherited and appears to be circa 2003 (there's a date stamp on the power supply which leads me to this conclusion). I've got it set up as a Skype terminal for my 2 year old to keep in touch with her grandparents and other members of the family - which everyone loves. It has a generic baby-ATX motherboard with no identifying markings. CPU-Z identifies the motherboard model as VT8601 but doesn't provide me with any manufacturer name. There's one stamp on the motherboard that says "Rev.B". On board it has 10/100 LAN, 2 x USB 1.0, VGA, PS/2 for KB and mouse, parallel port, 2 x serial ports, 2 x IDE, 1 x floppy, 2 x SDRAM slots, 1 x CPU housing that is seating a 1.3GHz Intel Celeron CPU, 3 x PCI, 1 x AGP - although you can only use 2 of the PCI slots if you use the AGP slot due to the physical layout of the board. It's got 768Mb PC133 SDRAM - 1 x 512Mb & 1 x 256Mb installed as well as a D-LINK WDA-2320 54G Wi-Fi network card and a generic USB 2.0 expansion board containing 3 x external + 1 x internal USB connectors. All this is sitting in a slimline case. I don't know the wattage of the PSU, but can post this later if this proves to be helpful. The motherboard is running a version of Award BIOS for which I don't have the version number to hand but can again post this later if it would be helpful. It has an 80Gb Western Digital hard drive freshly formatted and built with Windows XP Professional with Service Pack 3 and all current patches. In addition to Windows XP, the only other software it's running is Skype 4.1 (4.2 crashes the machine as soon as it starts up). It's got a Daytek MV150 15" touch screen running through the VGA and COM1 with the most current drivers from the Daytek website and the most current version of ELO-Touchsystems drivers for the touch component. The webcam is a Logitech Webcam C200 with the latest drivers from the Logitech website. The problem If I hook any USB 2.0 devices to this machine, it hangs the whole machine and I have to hard boot it to get it back up. Workarounds found I can plug the same devices into the on board USB 1.0 connectors and everything works fine, albeit at reduced performance. I've tried 3 different kinds of USB thumb drives, 3 different makes/models of webcams and my iPhone all with the same effect. They're recognized and don't hang the machine when I hook them to the USB 1.0 but if I hook them to the USB 2.0 ports, the machine hangs within a couple of seconds of recognizing the devices were connected. Attempted solutions I've tried disabling all the on board devices that I'm not using - such as the on board LAN, the second COM port, the AGP connector etc. through the BIOS in an (perhaps misguided or futile) attempt to reduce the power consumption... I don't think it had any effect but it didn't do any harm. I was wondering if the PSU wattage just isn't enough to drive the USB 2.0 devices; I've seen this suggested but haven't found any confirmation that this could really be an issue - nor have I found a way to work around this issue - if indeed it is one. Any ideas? The only thing I haven't done which I only just thought of while writing this essay is trying the USB 2.0 card in a different PCI slot, or re-ordering the wi-fi and USB cards in the slots... although I'm not sure if this will make any difference. I've installed the USB card in another machine and it works without issue, so it's not a problem with the USB card itself. Other thoughts Perhaps this is an incompatibility between the USB 2.0 card and the BIOS, would re-flashing the BIOS with a newer version help? Do I need to be able to identify the manufacturer of the motherboard in order to be able to find a BIOS edition specific for this motherboard or will any version of Award BIOS function in its place? Question Does anyone have any ideas that could help me get my USB 2.0 devices hooked up to this machine?

  Read the article

• How to make Web Storage persistent in Cordova using JS?

  - by ett

  I have a small quiz app, which is a cross-platform mobile app, that I plan for it to run on Android, iOS, and WP8. I want to store a local highscore, where it will keep track how many points the user had, and if he/she does better than the already stored highscore, update the current highscore. Though, I want the highscore to be persistent, what I mean is, every time the user opens the app I want the last highscore to be present and it to be compared with the new quiz score. Meaning, I don't want the highscore to be deleted after each time the app is closed. I also want for the first time when the app is ran, the highscore to be set to 0, so obviously the first time the user finishes the quiz gets a new highscore. I have those codes so far: scoredb.js // Wait for device API libraries to load document.addEventListener("deviceready", initScoreDB, false); // Device APIs are available function initScoreDB() { window.localStorage.setItem("score", 0); highscore = window.localStorage.getItem("score"); } main.js var correct = 0; var highscore; // In between I have some code that keeps incrementing // correct variable for each correct answer. if (correct > highscore) { window.localStorage.setItem("score", correct); highscore = correct; } It does seem to work okay once the app is started. I did the quiz three times, in the simulator, and it keeps the score as it should. Though, each time I open the app, highscore is reseted to 0. I guess it is due to the fact that I call initScoreDB when the device is ready, and I initialize the score to 0 there and give that value to highscore. Can someone help me to initialize the score to 0 only when the app is ran for the first time, and all the other times to keep the latest highscore as the current highscore and compare it each time with the score that is achieved when the quiz is finished. If someone can help me, I would be glad.

  Read the article

• Can I use Veritias Storage Manager to provide HA storage using server-local storage?

  - by Paul

  I have a need to provide an high-availability ftp/http file repository. Upload will happne to one server, but the uploaded file must be immediately visisble on all other servers I can handle the failover of the servers themeselves using load balancers. But in the event of failure of one server, the other servers must see the same contents of the repository. Normally, I'd use a SAN for this, but in this case the data centre standards do not allow SAN/external storage - all storage will be local to the servers. Cam I use Veritas Storage Manager (or any other product) to manage mirroring hte contents between servers in this way? Or does that require a SAN? I couldn't tell either way from a quick look at the data sheets etc.

  Read the article

• My fresh installed ubuntu 12,4 won´t start without live usb drive

  - by Alexander Neira

  I just installed a fresh copy of ubuntu 12,04 in my netbook, through a live USB drive. I used the whole HDD and erased an existent win 7 partition. It installed everything and then asked me to reboot. When I did that, after rebooting, it only appeared the writer marker on top of a black screen and only that. Then, i plugged in again my usb drive and reboot. It loaded, but in the loading screen sent me (once) an error about the hard drive, that some file was missing (sorry i coulnd't write down the exact message). After that, I tried to re install ubuntu using my USB drive, but it sends me inmediately to the login screen. How do I solve this?

  Read the article

• HP Deskjet 720C USB printer doesn't finish

  - by 213441265152351

  I have an HP Deskjet 720C connected through a USB cable to an Ubuntu 12.04 laptop. When I plugged the printer for the first time into the fresh 12.04 laptop install, it auto-detected the printer correctly and choose the recommended drivers without a problem. The document print fine until they reach the end of the last page, then suddenly stop just about the end leaving the page unfinished. I have checked that the margins are the correct ones. I have the latest version of cups installed. I have also tried changing the options of usb-unidir-default and usb-no-reattach-default via lpadmin, but the printing stops even earlier. EDIT: It seems like the problem is with the last page. So if I am printing 3 pages, the first two work well but the last few lines in the last page are not printed. Any ideas?

  Read the article

• Chainload boot of Ubuntu installed on 32GB SD card from legacy Grub boot on USB

  - by Gary Darsey

  I have Ubuntu installed on a 32 GB SD card (in the Storage Expansion slot on an Acer Aspire One) with Grub2 installed in the same partition. I boot into legacy Grub on a USB drive and would like to boot by chainloading Grub2 from Grub (kernel/initrd or symlink booting would also be fine), but I haven't figured out how to do this from legacy Grub CLI. Output from blkid for this partition is /dev/mmcblk0p1: LABEL="Ubuntu" UUID="7ceb9fa7-238c-4c5d-bb8e-2c655652ddec" TYPE='ext4" / fdisk -lu information Boot indicator ID 83. Related entries in grub.cfg: search --no-floppy --fs-uuid --set-root 7ceb9fa7-238c-4c5d-bb8e-2c655652ddec linux /boot/vmlinuz-3.5.0-17-generic root=UUID=7ceb9fa7-238c-4c5d-bb8e-2c655652ddec... initrd /boot/initrd.img-3.5.0-17-generic I can't seem to replicate this in legacy Grub. Is there any way get Grub2 to chainload? How do I set root with UUID in legacy Grub? I prefer to boot from USB. Would Grub2 on USB (copying the grub.cfg generated during installation) be an option?

  Read the article

• How to partition USB drive for Ubuntu installation?

  - by Heather

  I am not a computer savvy and need to know how to partition my USB drive without messing up my laptop. I already have the boot order set up properly and the USB drive already has the ISO image downloaded onto it. I am ready for install but just do not know how to partition. I am installing Ubuntu 12.4 LTS onto a USB. Can someone help me? I need an easy walk through please. What I need to know is from the screen shots above do I use the swap drive and if so how do i partition that drive to be my drive? I am stuck up to this part on the installation process. Yes please make a list of the steps for me.

  Read the article

• Cannot boot from USB disk with "not a COM32R image" error

  - by Siva Prasad Varma

  After installing 11.10 on my Dell Studo 15 (Model 1557) laptop, it started to overheat. Recently it even shutdown twice saying that critical temperature has reached even when I was just idling (not even a single program was open except for Firefox). After learning that it is a problem with 3.0.0 kernel I decided to roll back to 10.04 LTS. I have downloaded the most recent 10.04 iso from ubuntu.com and created a live USB using startup disk creator in 11.10. But when I am trying to boot from USB I am getting the following error vesamenu.c32: not a COM32R image I have installed ubuntu from usb stick a couple of dozen times before this and I think it is not a problem with my hardware. Please tell me what to do.

  Read the article

• Backup all home folders on usb disk and accessibility

  - by PatrickV

  I am using Ubuntu 12.04 and have multiple family members working on it with there own home folder. I have an USB disk and want to use it to backup my home folders. Trying this, I got some questions. When my disk auto mount, it is not visible for each user. It seams to be visible for the user the time I connect the usb disk. I want to create one folder per home on the usb disk to backup the data to. But when I format the disk in EXT4 or FAT for example it is Read Only. How can I format the disk so it is accessible to every user. Best Regards, Patrick

  Read the article

• USB Bose speakers with ubuntu 12.04

  - by Richard

  On a fresh install of ubuntu 12.04 my Bose USB weren't working at all. I read through a large number of posts here and elsewehre on Bose or USB speakers. I tried many things (modifying a number of different files, etc.). This worked... sort of: USB Audio on 0 volume on startup The AlsaMixer works after I turn up the volume, but the sound crackles a lot. Also, having to use a term mixer to change sound isn't ideal. Any other ideas? Thank you, Richard

  Read the article

• Problem mounting USB Mobile Broadband dongle in Ubuntu 13.04

  - by Still A Learner

  I have been using Ubuntu 13.04 since last two months and I have problem mounting my USB dongle. I have Lenovo G-580 series laptop. It has 3 USB ports which are 3.0. When I attach dongle to one of the three USB ports the device gets mounted immediately but in the other two ports I have to reboot the OS while the dongle is attached to the laptop in order to mount it and connect to the internet. My dongle is of ZTE. I don't get what is going wrong.

  Read the article

• USB Mouse sleeping after 5 seconds when on battery

  - by yurividal

  My usb mouse sleeps after 5 seconds of inactivity when running on battery power. It wakes uo again when i press any button on the mouse. This is really annoying. I have made lsusb, and I noticed my mouse is Bus 001 Device 012: ID 04d9:2083 Holtek Semiconductor, Inc. I have checked my /sys/bus/usb/devices/usb1/power/autosuspend but it is already set to 0, and the directory usb1 has many subdirectories which also have autosuspend files, and i dont know how to edit them. Also, I would like a permanent solution, which would work for any mouse, on any of my 3 usb ports. Any ideas? Using: Ubuntu 12.04 64bit

  Read the article

• Trying to boot from usb

  - by iron

  I have similar issues but none with the 12.04 build. Im trying this on a dell d610 laptop with a bad hard drive and was told i could just directly boot from the usb drive. Im using an 8g usb drive and i have tried using the uui tool and get this message. SYSLINUX 4.06 EDD 4.06-pre1 Copyright (c) 1994-2011 H.Peter Anvinet al ERROR: No configuration file found No DEFAULT or UI configuration directive found! Then i tried using unetbootin and got the bootup screen with only the default option and it would say auto boot with a 10 sec countdown and start over again. I do have the boot sequence for usb first.

  Read the article

• USB modem could not mount on 12.04

  - by maz

  I have a usb wimax modem. If I connect it at ubuntu 10.04 it has been detected and mounted as cd see here. From there I got that it is "iso96660" type and device location is /dev/sr1. But when I connect this usb modem in Ubuntu 12.04, it could not be mounted. So I have tried to find the file sr1 in this location /dev/ and could not found any-thing. But if disconnect and then re-connect the usb modem at this path /dev/, I saw a flickering of "sr1" named file for a certain time (1 sec) then it's dis-appear. Can anyone guide me to connect it step-by-step in Ubuntu 12.04?

  Read the article

• Ubuntu Live USB: best practices for secure net traffic

  - by Och

  I want to to set up a live USB with Ubuntu, in the most secure way. So I want to have the persistent data on a second USB, something that its not that much problematic. How to configure a very safe Internet surfing (throughout a VPN?) Which are the best practices that could be implemented to have the Ubuntu live in a USB, the persistent data in other, and with the Internet access to a VPN (the Ubuntu privacy remix gives most of this, except the VPN config), Any ideas of how to combine the best of Ubuntu privacy remix, and Internet access to a VPN?

  Read the article

• Create secure working environment on USB stick

  - by Chris

  I want to create an usb stick which contains an ubuntu installation that: can be used as a working environment (Covered in: How do I install Ubuntu to a USB key?) - ie the ubuntu installation on the stick must provide an accessible home folder. Is completely encrypted. I intend to use it as a secure environment to work on sensitive customer data - and also need the system on the stick to be able to connect to the internet. How do I realize the complete usb stick encryption? I am also very thankfull for any further articles and ideas on this topic!

  Read the article

• Problem with setting up a bootable USB on corrupted OSX

  - by Nick

  I cant access the desktop because my harddrive is corrupted. Therefore I want to make a bootable USB stick so i can transfer all of my important files to my External HD. Problem is that Im stuck on Step 3 --- http://www.ubuntu.com/download/help/create-a-usb-stick-on-mac-osx . Im not sure of what i should change this to: hdiutil convert -format UDRW -o ~/path/to/target.img ~/path/to/ubuntu.iso It says convert failed - No such file or directory. Obviously the problem is that i dont know the path to the USB, maybe you know how to find out? Please help me. Thanks. ps. Ive downloaded the ubuntu desktop amd64+mac. pps. Unetbootin is a different alternative, but i dont know if it works?

  Read the article

< Previous Page | 8 9 10 11 12 13 14 15 16 17 18 19  | Next Page >