Search Results

Search found 11645 results on 466 pages for 'win xp'.

Page 12/466 | < Previous Page | 8 9 10 11 12 13 14 15 16 17 18 19  | Next Page >

• Windows fails to restart on reboot

  - by daramarak

  We have many machines running windows xp embedded. The machines are configured to reboot if any problems should occur. But our problem now is that in some cases the machines seems to shut down, but never reboots again. The same machine might reboot fine in the next time we try. Does anyone have clue what the problem might be. Does anyone got some advice on how to debug this problem. Are there any logs that might contain valuable information? Recreating this problem is not done easily so elimination methods are not feasable.

  Read the article

• Installing XP through USB-flash disc

  - by Crazy Buddy

  I don't know whether this could be asked here... So, Pardon me for this. Probably, this is based on My laptop and a contradiction to this question asked already here... I tried to format my "government-provided" laptop (No CD-drive). I thought those IT guys are proving that they're too smart..! I have the Windows XP CD right now. I didn't like to stick with some home-made OS from our Government. So, I used another laptop to format the govt. thing and tried to install XP (As I didn't have enough bills to invest on Windows 7 or 8). Case 1: First, I allowed WinSetupFromUSB 1.0 beta 8 to deal with the flash disk. I wondered for the first time that XP text-screen appeared. Using the first part, I formatted my laptop. It started to copy files, entered into the next part, and completed the installation. I started my PC for the first time. XP splash screen appeared. Suddenly, a blue screen flashed and disappeared (I can't even read what it says). Rebooted and arrived at the screen, "Start Windows Normally". It happens and happens still - like an infinite loop :-) Case 2: Next, I used Rufus 1.2.0 to transfer files to my Flash and it screwed everything out. Even if I used Flash to boot, it arrives to the same screen "Start Windows normally". It doesn't show any response of Flash being inserted. Then I recognized that, It's simply copies everything to the flash disk. Case 3: Then, I started with Novicorp WinToFlash (giving utmost priority to this site). I booted with the disk. I entered into the first part - "Text mode". Some lines started running like that "Press F6 if you..." like that. The last thing I saw was, "Setup is starting Windows..." Suddenly a blue screen appeared like this captured one. I've a suspicion that the same screen appears again & again in first case. Man, I'm dead. Case 4: For the sake of my last hope, I used WinSetupFromUSB 0.1.1. I was shocked on arriving at a screen which says something "GRUB4DOS" like that and some commands like {command line, reboot, halt, \find menu.lst} and when I go inside those "find" options, I see "Error:15 - File not found". Googling provided some commands to mount SETUPLDR.BIN file in the "grub" thing which also proved unsuccessful... Some sites say that Factory reset uses only some function keys. A guy said that it's F11 for lenovo. Screw him. It's all a waste-of-time. But, I think SE would help me out. Is our government IT guys doin' this to me? Are they Soooo smart to spark some blue screen in front of me to freak me out? Any suggestions or new (useful) USB transferring things would be appreciated. It's very urgent. So, It'd be better if you guys pay some attention in debugging and help me out..? Thanks for your time guys :-)

  Read the article

• Give back full control to a user on a disk from another computer

  - by Foghorn

  I have my friend's hard drive mounted externally. After messing with the permissions with TAKEOWN so I could fix some viruses, I have full control over their drive. The problem is, now it's stuck in a "autochk not found" reboot sequence. I think the problem is that the boot sector is invisible to the drive now. So my question is, How can I use icacls to give back the full ownership, when the user I am giving it to is not on my machine? I ran the TAKEOWN command from my windows 7 laptop, their machine is a windows xp Professional with three partitions, I only altered the one that has the boot sector. Here is the permissions that icacls shows: (Where my computer is %System% my username is ME, and the drive is E:\ C:\Users\ME icacls E:\* E:\$RECYCLE.BIN %System%\ME:(OI)(CI)(F) Mandatory Label\Low Mandatory Level:(OI)(CI)(IO)(NW) E:\ALLDATAW %System%\ME:(I)(OI)(CI)(F) E:\alrt_200.data %System%\ME:(OI)(CI)(F) E:\AUTOEXEC.BAT %System%\ME:(OI)(CI)(F) E:\AZ Commercial %System%\ME:(I)(OI)(CI)(F) E:\boot.ini %System%\ME:(OI)(CI)(F) E:\Config.Msi %System%\ME:(I)(OI)(CI)(F) E:\CONFIG.SYS %System%\ME:(OI)(CI)(F) E:\Documents and Settings %System%\ME:(I)(OI)(CI)(F) E:\IO.SYS %System%\ME:(OI)(CI)(F) E:\Mitchell1 %System%\ME:(I)(OI)(CI)(F) E:\MSDOS.SYS %System%\ME:(OI)(CI)(F) E:\MSOCache %System%\ME:(I)(OI)(CI)(F) E:\NTDClient.log %System%\ME:(OI)(CI)(F) E:\NTDETECT.COM %System%\ME:(OI)(CI)(F) E:\ntldr %System%\ME:(OI)(CI)(F) E:\pagefile.sys %System%\ME:(OI)(CI)(F) E:\Program Files %System%\ME:(I)(OI)(CI)(F) E:\RECYCLER %System%\ME:(I)(OI)(CI)(F) E:\RHDSetup.log %System%\ME:(OI)(CI)(F) E:\System Volume Information %System%\ME:(I)(OI)(CI)(F) E:\WINDOWS %System%\ME:(I)(OI)(CI)(F) Successfully processed 22 files; Failed processing 0 files C:\Users\ME

  Read the article

• Sony VAIO TZ2 internal camera and Windows XP

  - by user34300

  I have a Sony Vaio TZ2 laptop here and I'm trying to install Windows XP SP3 on it. Everything works fine except of the integrated camera which is supposed to be a USB device but is absent in the Devoice Manager. I've read that it is important in what order you install drivers when you downgrade this Vista preinstalled model to Windows XP so I repeated once again the installation with the correct order by still had no luck with the camera. Can someone give me an advice on how to woke up this camera? Thanks!

  Read the article

• Unattended Windows XP Install Stops at Deleting Previous Installation

  - by maik

  I'm not sure if I'm just not asking Google properly or what, but I can't come up with a good answer to this problem. We have MDT 2010 setup and have a Task Sequence for refreshing Windows XP machines. It doesn't seem to happen all the time, but a lot of the time when we start a refresh it goes through the normal motions and when it gets into the first part of Windows XP setup (the blue screen) it stops, telling me a Windows installation already exists at that location and I can press L to continue, erasing everything and using that folder. I've poured over the unattend file and can't find an option that will just delete the old files and keep going, so I'm at a loss. Any ideas?

  Read the article

• Windows 7 Easy Transfer does not start (Windows XP)

  - by Gerhard Weiss

  Windows 7 Easy Transfer does not start on my Windows XP system. I installed Windows 7 Easy Transfer and when I click to start it nothing happens. Not even an error message. I uninstalled and reinstalled a few times with the same results. I even tried starting it from C:\Program Files\Windows Easy Transfer 7\migwiz.exe with the same results. Nothing happens! Any one else run into this issue? Any suggestions on how to start it up differently? This is my work system so I do not know if they have it locked down. This is a Windows XP, Dell OptiPlex755 built about 3 years ago. I downloaded the 32-bit from this website: http://windows.microsoft.com/en-us/windows7/products/features/windows-easy-transfer and yes my system is 32-bit ;)

  Read the article

• Sharing laptop's internal optical drive running windows XP Media Center Edition with Netbook running

  - by Col

  just got a new HP netbook with no optical drive and guide said I should be able to share the optical drive of another windows computer. The netbook is running Windows 7 and the laptop, also HP, with the internal optical drive is running Windows XP Media Center Edition. I have wireless network that both the laptop and netbook access without a problem. The instructions did not seem to work in my case. When I right clicked on Properties of the optical drive and went to the Sharing tab, there was no selction for Advanced Sharing as the instructions said. XP made me go to Network wizard and set up a network, (which I already had). After doing that I could not access the drive from Windows 7. Has anyone benn able to do this?

  Read the article

• Windows XP stay logged in

  - by VEC

  Is there a way to make Windows XP stay logged in even after the user logs off? Right now the PCs log in at start up and we're using WinOFF to shut down the computer after X minutes of inactivity. The problem is that WinOFF does not work when the user logs off and stays in the "Select user login" screen. I'm thinking a possible solution would be to make the computer log back in as the default user after Y minutes of inactivity. How can I make it so that Windows XP logs in automatically after the user logs off?

  Read the article

• Will password protected user accounts in XP Pro provide sufficient security for Remote Desktop over

  - by Craig Johnston

  Will password protected user accounts in XP Pro provide sufficient security for Remote Desktop over internet?

  Read the article

• Windows XP boot: black screen with cursor after BIOS screen

  - by Radio

  Here is a weird one, Got computer with Windows XP. It's getting stuck on a black screen with cursor blinking. What did I do: - Boot from installation CD (recovery option - command line): chkdsk C: /R copy D:\i386\ntdetect.com c:\ copy D:\i386\ntldr c:\ fixmbr fixboot Chkdsk showed 0 bad sectors and no problems during scan. dir on C:\ shows all directories and files in place (Windows, Program Files, Documents and Settings). BIOS shows correct boot drive. Still does not boot. Not sure what to think of. Please help. UPDATE: Just performed these steps: Backed up current disk C: (without MBR) using True Image to external hard drive Ran Windows XP clean installation with deleting all partitions and creating new one. Hard drive booted fine into Windows GUI installation!!! Then: Interrupted installation. Booted from True Image recovery CD and restored archive of disk C to an new partition. Same issue with black screen.

  Read the article

• Prolific USB-to-Serial Comm Port significantly slower under Windows 7 comparing to Windows XP

  - by Dmitry S

  I am using a Prolific USB-to-Serial adapter based on the Prolific chip to use with a device on serial port. I have the latest version of the driver installed: 1.3.0 (2010-7-15). When I use my device with this adapter on my main Windows 7 (32bit) system it takes 8-9 seconds to send a command through to the device. However, when I do the same thing on a different Windows XP system (an old laptop I borrowed for testing) it only takes 2-3 seconds. I have made sure that the port settings and other variables are the same between systems. I also tested on a third laptop (also running Windows 7) and again got a significant delay. So the question is if anyone else experienced the same problem and found a solution. I would like to avoid moving to an XP system for what I need to achieve so that's my last option.

  Read the article

• Install windows XP alongside Windows 8

  - by user01

  I have a 64 bit (AMD)CPU but it has 32 bit Windows 8 installed. Could I somehow trickily install another Windows XP 64 bit alongside to that ? I want to do this because I almost never use the Windows 8 apps & majorly use this machine for java development. So I would like to run a lightweight OS implementation. Additionally, With 64 bit version of Windows XP, I would be able to take advantage of my 64 bit CPU. So, how do I do it? (I hope there's some way to do this:)

  Read the article

• Reading PFS First Choice and Word Perfect 5 files in an XP or Windows 98 environment

  - by indyK1ng

  Hello all, My priest has 3 computers, Windows 3.1, Windows 98 and Windows XP. Recently his power supply blew out on his Windows 3.1 computer and he needs to get to the data on the hard drive. He's looking into imaging the hard drive and setting it up as a VM, which might be a bit much for him. Ignoring getting the data off the hard drive as a separate problem, are there any programs out there that can read files from PFS First Choice and Word Perfect 5. He already has Microsoft Office so solutions involving that are preferable. If he can install the software on his Windows XP or 98 computer, that would be helpful too. Thank you for your help

  Read the article

• Moving Windows XP from ICH10R RAID 5 to single disk using Linux [migrated]

  - by tudor

  A friend's machine running Windows XP refused to boot recently which is running 3 SATA disks on RAID 5 (which was previously upgraded from RAID 1 not by me). I have determined there to be a disk failure. The disks have been replaced many times in the past few years. I wish to backup the RAID5 partition before I try anything to fix it. The RAID chipset used is ICH10R/DO. So, I plugged in an extra IDE drive and an Ubuntu USB key and looked at the RAID. The partitioning is a mess, but I did find at least one degraded but working RAID array with two partitions, one 79GB and the other 86GB. Then I: 1) Partitioned my IDE disk using fdisk to have a partition of 80GB and bootable, and marked as NTFS. 2) dd the contents of the array to the partition 3) disconnected everything else 4) inserted a Windows XP CD and ran fixboot, fixmbr, and bootcfg. They all run ok and claim that they worked. (e.g. bootcfg detects the Windows partition, fixboot returns saying that it was written correctly.) However, I'm still getting an error like "DISK FAILURE, BOOT DISK NOT FOUND". I have tried running the GRUB rescue disk, which also runs ok, but won't boot into Windows. It just stops with a flashing cursor after chainloader +1, boot. One clue may be that the partitions appear to be wack. One disk has a 79GB RAID partition on a 500GB drive with a offset, the second disk has a 320GB RAID partition across the whole drive. Additionally, the BIOS lists the RAID size as being 149GB. I don't see how this works. How are they even assembling the array when the partitions are so different? I have also tried running the Windows XP automated repair tool, but that didn't work either. I'm presuming this is something simple. Perhaps Windows is attempting to boot into RAID and, upon not finding it, simply crashing? Perhaps the 79GB partitions offset means that it's looking into the disk by that much? Please help!! To clarify: I want to make the single IDE disk bootable with a copy of the array so that I can prove/disprove that it's just that Windows has become corrupted, and use windows tools to correct it before attempting the same thing on the RAID array. That way I have a working backup and can show the process I used to fix it.

  Read the article

• Change Windows XP sound volume via the command line

  - by Thomas

  Is it possible to change the volume in Windows XP via the command line?

  Read the article

• Mapping of memory addresses to physical modules in Windows XP

  - by Josef Grahn

  I plan to run 32-bit Windows XP on a workstation with dual processors, based on Intel's Nehalem microarchitecture, and triple channel RAM. Even though XP is limited to 4 GB of RAM, my understanding is that it will function with more than 4 GB installed, but will only expose 4 GB (or slightly less). My question is: Assuming that 6 GB of RAM is installed in six 1 GB modules, which physical 4 GB will Windows actually map into its address space? In particular: Will it use all six 1 GB modules, taking advantage of all memory channels? (My guess is yes, and that the mapping to individual modules within a group happens in hardware.) Will it map 2 GB of address space to each of the two NUMA nodes (as each processor has it's own memory interface), or will one processor get fast access to 3 GB of RAM, while the other only has 1 GB? Thanks!

  Read the article

• Color Profiles in Windows 7 vs. XP

  - by flxkid

  I have a Brother Color Laser Printer and an HP 8150DN. I have a local Windows 7 Pro machine that I do graphics work on. I created a letterhead that when printed from my machine looks dark and rich on either the mono HP or the color Brother laser. I take this same letterhead, and move it onto our network for use by our users which are all on XP. Then they print the same file, it is washed out on either printer. I've confirmed that the printer settings we're using are identical. I've confirmed that its not related to the program or even specifically to the letterhead. I can duplicate this with other files too. I'm down to XP vs Windows 7 being the issue. I'm fairly certain now that color profiles are involved. I have no clue how to fix it though. Any suggestions would be much appreciated.

  Read the article

• Help me a routing server on Windows XP

  - by Lu Lu

  I am developing client/server applications and need to test them on Internet environment. However, I only have one PC without connecting the public internet, so I have a plan to simulate a virtual internet environment on my PC. I think I will install the virtual machines for my purpose, but I can install only one machine because of my slowly PC. At the moment, my PC has 2 machines: the host machine (use Windows XP) & the virtual machine (use Windows Server 2003 Ent). Each machine will have 2 network adapter (host-only & internal), and in 2 network adapters, the internal adapter is private on each machine, and host-only adapters are connected together. With Windows 2003, routing server is ok, but I wonder on Windows XP, are there any routing server product? Please help me. Thanks.

  Read the article

• Resealing windows XP stops PXE working

  - by zeocrash

  I'm trying to capture a drive image of a windows xp pro machine. I've gone through the steps and resealed the machine. When i try and network boot the PXE instantly gives the message "PXE-MOF" and ends. I have managed to get network boot to work on this machine whenever XP is not resealed. I have tried Multiple times to get PXE to work after resealing windows, but with no luck. As soon as i unseal it, PXE works every time. I know PXE is supposed to work independent of what's on the hard drive. Is there any way that resealing windows could cause PXE to stop working.

  Read the article

• Customized windows xp installation

  - by user23950

  How to create a customized version of an xp installation cd. I want a hand's off installation that will install all the themes, drivers , and applications I need without my intervention. How can I do that. I tried to make use of this software called Nlite. But when I tested the iso file using virtual box. The virtual box said that there's a certain file that cannot be copied. And by the way, before I customized the original iso image of windows xp sp3, it doesn't have the file copying problem that I mentioned above.

  Read the article

• windows xp blue screen

  - by user287745

  got a blue screen restarted, were is the event logged in windows xp, how can i view the history of the blue screens?

  Read the article

• Building a new PC, Installing XP, blue screen of death

  - by Tim

  I got a gigabyte barebones kit and am installing windows-XP(SP1) and the initial setup works, then it restarts and goes into the second phase of the setup. Then when installing components (I think that's what it says) it gets half way done and comes up with a blue screen saying IRQL_NOT_LESS_OR_EQUAL. BUT! I had gotten past that by installing windows-XP media center addition Now I am trying to install the drivers for my Asus ATI Radeon 5770 graphics card and I get another blue screen of death that doesnt give much info something about address x0000005. Would you think there is something wrong with something in my system or do you think if I got windows 7 that would take care of things? Sorry for probably not giving enough info. Here is what I have MotherBoard - Gigabyte S-series GA-H55M-S2(v) PSU - Ultra 500 watt atx HDD - Sata serial ATA Seagate Baracudda 7200 CPU - Intel i3 Memory - 4gig crucial Graphics Card - Asus ATI Radeon 5770 1Gig DDR5

  Read the article

• Overcrowded Windows XP Folders

  - by BlairHippo

  I know that, technically, an individual Windows XP directory can hold an immense number of files (over 4.29 billion, according to a quick Google search). However, is there a practical ceiling where too many files in one directory starts having an impact on reads to those files? If so, what factors would exacerbate or help the issue? I ask because my employer has several hundred XP machines in the field at client sites, and the performance on some of the older ones is getting "sludgy." The machines download and display client-defined images, and my supervisor and I suspect that our slacktastic approach to cache management could be to blame. (Some of the directories have tens of thousands of images in them.) I'm trying to gather evidence to support or contest the theory before spending time on a coding fix.

  Read the article

• Share files from Windows XP to Mac Snow Leopard

  - by sympleko

  Hi, I have a Windows XP desktop and a MacBook Pro on my home network. I would like to mount my "home directory" (My Documents, or whatever they call it in Windows) onto my MacBook's filesystem. So far I have been able to do this with the Shared Documents folder, using the excellent howto at Maclive. But I'd like to be able to authenticate using my Windows XP username and password, and access my files remotely without exposing them to everyone on the nextwork. Any clues or good links?

  Read the article

• Fast user switching suddenly stopped working on my Windows XP Prof machine

  - by John

  When I start Win XP SP2 I get to the welcome screen with no user names displayed. I then press Alt+Ctrl+Del twice and type in the username and then am able to login to Windows. When I go to user accounts in Control Panel I get the error message cells.item(...) is null or not an object. When I go to computer administration and then local users and groups there are no users listed under users but the groups is listed. I did a windows repair with no luck. I tried doing restore points but it said they didn’t work. Please help? My wife and I have been using fast user switching on out computer for years with no problem. Beginning a few months ago, I started Win XP Prof one day I get to the welcome screen with no user names displayed. I then press Alt+Ctrl+Del twice and type in the username and then am able to login to Windows with an account of owner. When I go to user accounts in Control Panel I get the error message cells.item(...) is null or not an object. When I go to computer administration and then local users and groups there are no users listed under users but the groups are listed. I have done system point restores and imports of exports of the registry I take with import. I have tried everything under safe mode and it makes no difference. This followed a Microsoft update the night before as I left the computer on. I tried to do a restore point but all my restore points failed and could not backout the MS updates. I was working with a fellow from Microsoft and he had me do all kinds of things but to no avail. He seems to think a DLL file is corrupt but which one? Finally in desperation he sent me a new OS XP Prof SP3 disk and I installed it and it wiped my hard drive. Luckily I took an Acronis Image backup first so I easily restored my system. I do not want to do a fresh windows update as it is heavily customized and worked fine up to that point. This has been going on for months, Thanks John

  Read the article

< Previous Page | 8 9 10 11 12 13 14 15 16 17 18 19  | Next Page >