Search Results

Search found 8611 results on 345 pages for 'apt fast'.

Page 120/345 | < Previous Page | 116 117 118 119 120 121 122 123 124 125 126 127  | Next Page >

• Cutting Ubuntu to the bone for Virtualbox VM

  - by Monty

  I've been looking around for a Linux variant which will install only the software I need rather than everything Ubuntu (for example) puts in by default. This is to create a virtual machine in Virtualbox which has bash, apache, python, perl, SQLite, openssh and a few other programs but nothing else. I'd prefer to go with Ubuntu if possible but another modern distro would do as well (I like using apt-get and yum rather than downloading/compiling etc). So far, I've tried: SuseStudio.com, which is probably the best so far. Pressing F4 to get the boot options on Ubuntu 9.10, but there is no minimal installation (I think there was once). Arch Linux, slightly confusing install procedure but I might go back and try again. Gentoo, started well but fairly soon the HD on the virtual machine went to 2Gb, even before the installation had started in earnest (I'd partitioned the disks is all). I realise there are various "small" Linuxes around like Puppy, Feather, DSL, etc, but they seem to be aimed at desktop users or as a techie's toolkit, and I want a small-as-possible server distro which can be managed with tools like apt or yum or similar. TIA for any advice you can offer! -- Monty

  Read the article

• Ubuntu + virtualenv = a mess? virtualenv hates dist-packages, wants site-packages

  - by lostincode

  Can someone please explain to me what is going on with python in ubuntu 9.04? I'm trying to spin up virtualenv, and the --no-site-packages flag seems to do nothing with ubuntu. I installed virtualenv 1.3.3 with easy_install (which I've upgraded to setuptools 0.6c9) and everything seems to be installed to /usr/local/lib/python2.6/dist-packages I assume that when installing a package using apt-get, it's placed in /usr/lib/python2.6/dist-packages/ ? The issue is, there is a /usr/local/lib/python2.6/site-packages as well that just sits there being empty. It would seem (by looking at the path in a virtualenv) that this is the folder virtualenv uses as backup. Thus even thought I omit --no-site-packages, I cant access my local systems packages from any of my virtualenv's. So my questions are: How do I get virtualenv to point to one of the dist-packages? Which dist-packages should I point it to? /usr/lib/python2.6/dist-packages or /usr/local/lib/python2.6/dist-packages/ What is the point of /usr/lib/python2.6/site-packages? There's nothing in there! Is it first come first serve on the path? If I have a newer version of package XYZ installed in /usr/local/lib/python2.6/dist-packages/ and and older one (from ubuntu repos/apt-get) in /usr/lib/python2.6/dist-packages, which one gets imported when I import xyz? I'm assuming this is based on the path list, yes? Why the hell is this so confusing? Is there something I'm missing here? Where is it defined that easy_install should install to /usr/local/lib/python2.6/dist-packages? Will this affect pip as well? Thanks to anyone who can clear this up!

  Read the article

• Ruby - Nokogiri - Need to put node.value to an array

  - by r3nrut

  What I'm trying to do is read the value for all the nodes in this XML and put them into an array. This should be simple but for some reason it's driving me nuts. XML <ArrayOfAddress> <Address> <AddressId>297424fe-cfff-4ee1-8faa-162971d2645f</AddressId> <FirstName>George</FirstName> <LastName>Washington</LastName> <Address1>123 Main St</Address1> <Address2>Apt #611</Address2> <City>New York</City> <State>NY</State> <PostalCode>10110</PostalCode> <CountryCode>US</CountryCode> <EmailAddress>[email protected]</EmailAddress> <PhoneNumber>5555551234</PhoneNumber> <AddressType>CustomerAddress</AddressType> </Address> </ArrayOfAddress> Code class MassageRepsone def parse_resp @@get_address.url_builder #URL passed through HTTPClient - @@resp is the xml above doc = Nokogiri::XML::Reader(@@resp) @@values = doc.each do |node| node.value end end @@get_address.parse_resp obj = [@@values] Array(obj) p obj end The code snippet from above returns the following: 297424fe-cfff-4ee1-8faa-162971d2645f George Washington 123 Main St Apt #622 New York NY 10110 US test.test.com 5555551234 CustomerAddress I tried putting @@values to a string and applying chomp but that just prints the newlines as nil and puts quotes around the values. Not sure what the next step is or if I need to approach this differently with Nokogiri.

  Read the article

• Can't join OS X Mavericks to AD Domain

  - by watkipet

  I'm attempting to join an OS X Mavericks (10.9) client to a Windows Server 2008 Active Directory domain, however the bind fails with this error in the OS X client's system.log: Oct 24 15:03:15 host.domain.com com.apple.preferences.users.remoteservice[5547]: -[ODCAddServerSheetController handleOtherActionError: gotError: Error Domain=com.apple.OpenDirectory Code=5202 "Authentication server encountered an error while attempting the requested operation." UserInfo=0x7f9e6cb3e180 {NSLocalizedDescription=Authentication server encountered an error while attempting the requested operation., NSLocalizedFailureReason=Authentication server encountered an error while attempting the requested operation.}, Authentication server encountered an error while attempting the requested operation. I've joined (bound) Ubuntu Linux clients to the same domain with net ads join in the past with no problems (using the same administrative user). I don't have access to any server logs. Here's the GUI error (from Directory Utility) on the OS X client: Here's the GUI error (from User's and Groups) in System Preferences on the OS X client: Update After some Wiresharking I've got some more info: OS X Client - KDC (over UDP): AS_REQ (no padata) OS X Client <- KDC (over UDP): KRB5KDC_ERR_PREAUTH_REQUIRED OS X Client - KDC (over UDP): AS_REQ (this time with PA-ENC-TIMESTAMP in padata) OS X Client <- KDC (over UDP): KRB5KDC_ERR_RESPONSE_TOO_BIG OS X Client - KDC (over TCP): AS_REQ (also with PA-ENC-TIMESTAMP in padata) OS X Client <- KDC (over TCP): KDC_ERR_ETYPE_NOSUPP ...and that's it. This is what I think is going on: The OS X client sends a kerberos request. The KDC says, "You need to pre-authenticate. Try again" The OS X client tries to pre-authenticate (all this so far is over UDP) Something gets lost on our network and the KDC says, "Oops something went wrong" The OS X client switches to TCP and tries again. Over TCP, the KDC says, "You're using an encryption type I don't support" Note that in its padata records, the OS X client is always using "aes256-cts-hmac-sha1-96" as its encryption type. However, in its KDC_REQ_BODY record it lists the aes256-cts-hmac-sha1-96, aes128-cts-hmac-sha1-96, des3-cbc-sha1, and rc4-hmac encryption types. When the KDC comes back with KDC_ERR_ETYPE_NOSUPP, it uses rc4-hmac as its encryption type in its padata record. I know next to nothing about Kerberos, but it seems to me that the OS X client should go ahead and try the rc4-hmac encryption type. However, it does nothing after this. Update 2 Here's the debug log from Directory Services on the OS X client. Sorry--it's long. 2013-10-25 14:19:13.219128 PDT - 10544.20463 - ODNodeCustomCall request, NodeID: 52A65FAE-4B24-455D-86EC-2199A780D234, Code: 80 2013-10-25 14:19:13.220409 PDT - 10544.20463, Node: /Active Directory, Module: ActiveDirectory - client requested OU - 'CN=Computers,DC=domain,DC=com' 2013-10-25 14:19:13.220427 PDT - 10544.20463, Node: /Active Directory, Module: ActiveDirectory - Binding using '[email protected]' for kerberos ID 2013-10-25 14:19:13.220571 PDT - 10544.20463, Node: /Active Directory, Module: ActiveDirectory - new kerberos credential cache 'MEMORY:0x7fa713635470' for '[email protected]' 2013-10-25 14:19:13.220623 PDT - 10544.20463, Node: /Active Directory, Module: ActiveDirectory - krb5_credential - krb5_get_init_creds: loop 1 2013-10-25 14:19:13.220639 PDT - 10544.20463, Node: /Active Directory, Module: ActiveDirectory - krb5_credential - KDC send 0 patypes 2013-10-25 14:19:13.220653 PDT - 10544.20463, Node: /Active Directory, Module: ActiveDirectory - krb5_credential - fast disabled, not doing any fast wrapping 2013-10-25 14:19:13.220699 PDT - 10544.20463, Node: /Active Directory, Module: ActiveDirectory - krb5_credential - Trying to find service kdc for realm DOMAIN.COM flags 0 2013-10-25 14:19:13.221275 PDT - 10544.20463, Node: /Active Directory, Module: ActiveDirectory - krb5_credential - submissing new requests to new host 2013-10-25 14:19:13.221326 PDT - 10544.20463, Node: /Active Directory, Module: ActiveDirectory - krb5_credential - connecting to host: udp 192.168.0.1:kerberos (192.168.0.1) tid: 00000001 2013-10-25 14:19:13.221373 PDT - 10544.20463, Node: /Active Directory, Module: ActiveDirectory - krb5_credential - writing packet: udp 192.168.0.1:kerberos (192.168.0.1) tid: 00000001 2013-10-25 14:19:13.222588 PDT - 10544.20463, Node: /Active Directory, Module: ActiveDirectory - krb5_credential - reading packet: udp 192.168.0.1:kerberos (192.168.0.1) tid: 00000001 2013-10-25 14:19:13.222617 PDT - 10544.20463, Node: /Active Directory, Module: ActiveDirectory - krb5_credential - host completed: udp 192.168.0.1:kerberos (192.168.0.1) tid: 00000001 2013-10-25 14:19:13.222665 PDT - 10544.20463, Node: /Active Directory, Module: ActiveDirectory - krb5_credential - krb5_sendto_context DOMAIN.COM done: 0 hosts 1 packets 1 wc: 0.001960 nr: 0.000000 kh: 0.000560 tid: 00000001 2013-10-25 14:19:13.222705 PDT - 10544.20463, Node: /Active Directory, Module: ActiveDirectory - krb5_credential - krb5_get_init_creds: loop 2 2013-10-25 14:19:13.222737 PDT - 10544.20463, Node: /Active Directory, Module: ActiveDirectory - krb5_credential - krb5_get_init_creds: processing input 2013-10-25 14:19:13.222752 PDT - 10544.20463, Node: /Active Directory, Module: ActiveDirectory - krb5_credential - krb5_get_init_creds: got an KRB-ERROR from KDC 2013-10-25 14:19:13.222775 PDT - 10544.20463, Node: /Active Directory, Module: ActiveDirectory - krb5_credential - krb5_get_init_creds: KRB-ERROR -1765328359/Additional pre-authentication required 2013-10-25 14:19:13.222791 PDT - 10544.20463, Node: /Active Directory, Module: ActiveDirectory - krb5_credential - KDC send 4 patypes 2013-10-25 14:19:13.222800 PDT - 10544.20463, Node: /Active Directory, Module: ActiveDirectory - krb5_credential - KDC send PA-DATA type: 19 2013-10-25 14:19:13.222808 PDT - 10544.20463, Node: /Active Directory, Module: ActiveDirectory - krb5_credential - KDC send PA-DATA type: 2 2013-10-25 14:19:13.222816 PDT - 10544.20463, Node: /Active Directory, Module: ActiveDirectory - krb5_credential - KDC send PA-DATA type: 16 2013-10-25 14:19:13.222825 PDT - 10544.20463, Node: /Active Directory, Module: ActiveDirectory - krb5_credential - KDC send PA-DATA type: 15 2013-10-25 14:19:13.222840 PDT - 10544.20463, Node: /Active Directory, Module: ActiveDirectory - krb5_credential - krb5_get_init_creds: using ENC-TS with enctype 18 2013-10-25 14:19:13.222850 PDT - 10544.20463, Node: /Active Directory, Module: ActiveDirectory - krb5_credential - krb5_get_init_creds: using default_s2k_func 2013-10-25 14:19:13.227443 PDT - 10544.20463, Node: /Active Directory, Module: ActiveDirectory - krb5_credential - fast disabled, not doing any fast wrapping 2013-10-25 14:19:13.227502 PDT - 10544.20463, Node: /Active Directory, Module: ActiveDirectory - krb5_credential - Trying to find service kdc for realm DOMAIN.COM flags 0 2013-10-25 14:19:13.228233 PDT - 10544.20463, Node: /Active Directory, Module: ActiveDirectory - krb5_credential - submissing new requests to new host 2013-10-25 14:19:13.228320 PDT - 10544.20463, Node: /Active Directory, Module: ActiveDirectory - krb5_credential - connecting to host: udp 192.168.0.1:kerberos (192.168.0.1) tid: 00010001 2013-10-25 14:19:13.228374 PDT - 10544.20463, Node: /Active Directory, Module: ActiveDirectory - krb5_credential - writing packet: udp 192.168.0.1:kerberos (192.168.0.1) tid: 00010001 2013-10-25 14:19:13.229930 PDT - 10544.20463, Node: /Active Directory, Module: ActiveDirectory - krb5_credential - reading packet: udp 192.168.0.1:kerberos (192.168.0.1) tid: 00010001 2013-10-25 14:19:13.229957 PDT - 10544.20463, Node: /Active Directory, Module: ActiveDirectory - krb5_credential - host completed: udp 192.168.0.1:kerberos (192.168.0.1) tid: 00010001 2013-10-25 14:19:13.229975 PDT - 10544.20463, Node: /Active Directory, Module: ActiveDirectory - krb5_credential - krb5_sendto trying over again (reset): 0 2013-10-25 14:19:13.230023 PDT - 10544.20463, Node: /Active Directory, Module: ActiveDirectory - krb5_credential - Trying to find service kdc for realm DOMAIN.COM flags 2 2013-10-25 14:19:13.230664 PDT - 10544.20463, Node: /Active Directory, Module: ActiveDirectory - krb5_credential - submissing new requests to new host 2013-10-25 14:19:13.230726 PDT - 10544.20463, Node: /Active Directory, Module: ActiveDirectory - krb5_credential - connecting to host: tcp 192.168.0.1:kerberos (192.168.0.1) tid: 00010002 2013-10-25 14:19:13.230818 PDT - 10544.20463, Node: /Active Directory, Module: ActiveDirectory - krb5_credential - connecting to 11: tcp 192.168.0.1:kerberos (192.168.0.1) tid: 00010002 2013-10-25 14:19:13.231101 PDT - 10544.20463, Node: /Active Directory, Module: ActiveDirectory - krb5_credential - writing packet: tcp 192.168.0.1:kerberos (192.168.0.1) tid: 00010002 2013-10-25 14:19:13.232743 PDT - 10544.20463, Node: /Active Directory, Module: ActiveDirectory - krb5_credential - reading packet: tcp 192.168.0.1:kerberos (192.168.0.1) tid: 00010002 2013-10-25 14:19:13.232777 PDT - 10544.20463, Node: /Active Directory, Module: ActiveDirectory - krb5_credential - host completed: tcp 192.168.0.1:kerberos (192.168.0.1) tid: 00010002 2013-10-25 14:19:13.232798 PDT - 10544.20463, Node: /Active Directory, Module: ActiveDirectory - krb5_credential - krb5_sendto_context DOMAIN.COM done: 0 hosts 2 packets 2 wc: 0.005316 nr: 0.000000 kh: 0.001339 tid: 00010002 2013-10-25 14:19:13.232856 PDT - 10544.20463, Node: /Active Directory, Module: ActiveDirectory - krb5_credential - krb5_get_init_creds: loop 3 2013-10-25 14:19:13.232868 PDT - 10544.20463, Node: /Active Directory, Module: ActiveDirectory - krb5_credential - krb5_get_init_creds: processing input 2013-10-25 14:19:13.232900 PDT - 10544.20463, Node: /Active Directory, Module: ActiveDirectory - krb5_credential - krb5_get_init_creds: using keyproc 2013-10-25 14:19:13.232910 PDT - 10544.20463, Node: /Active Directory, Module: ActiveDirectory - krb5_credential - krb5_get_init_creds: using default_s2k_func 2013-10-25 14:19:13.236487 PDT - 10544.20463, Node: /Active Directory, Module: ActiveDirectory - krb5_credential - krb5_get_init_creds: extracting ticket 2013-10-25 14:19:13.236557 PDT - 10544.20463, Node: /Active Directory, Module: ActiveDirectory - krb5_credential - krb5_get_init_creds: wc: 0.015944 2013-10-25 14:19:13.237022 PDT - 10544.20463, Node: /Active Directory, Module: ActiveDirectory - krb5_credential - Trying to find service kdc for realm DOMAIN.COM flags 2 2013-10-25 14:19:13.237444 PDT - 10544.20463, Node: /Active Directory, Module: ActiveDirectory - krb5_credential - submissing new requests to new host 2013-10-25 14:19:13.237482 PDT - 10544.20463, Node: /Active Directory, Module: ActiveDirectory - krb5_credential - connecting to host: tcp 192.168.0.1:kerberos (192.168.0.1) tid: 00020001 2013-10-25 14:19:13.237551 PDT - 10544.20463, Node: /Active Directory, Module: ActiveDirectory - krb5_credential - connecting to 11: tcp 192.168.0.1:kerberos (192.168.0.1) tid: 00020001 2013-10-25 14:19:13.237900 PDT - 10544.20463, Node: /Active Directory, Module: ActiveDirectory - krb5_credential - writing packet: tcp 192.168.0.1:kerberos (192.168.0.1) tid: 00020001 2013-10-25 14:19:13.238616 PDT - 10544.20463, Node: /Active Directory, Module: ActiveDirectory - krb5_credential - reading packet: tcp 192.168.0.1:kerberos (192.168.0.1) tid: 00020001 2013-10-25 14:19:13.238645 PDT - 10544.20463, Node: /Active Directory, Module: ActiveDirectory - krb5_credential - host completed: tcp 192.168.0.1:kerberos (192.168.0.1) tid: 00020001 2013-10-25 14:19:13.238674 PDT - 10544.20463, Node: /Active Directory, Module: ActiveDirectory - krb5_credential - krb5_sendto_context DOMAIN.COM done: 0 hosts 1 packets 1 wc: 0.001656 nr: 0.000000 kh: 0.000409 tid: 00020001 2013-10-25 14:19:13.238839 PDT - 10544.20463, Node: /Active Directory, Module: ActiveDirectory - krb5_credential - Trying to find service kdc for realm DOMAIN.COM flags 2 2013-10-25 14:19:13.239302 PDT - 10544.20463, Node: /Active Directory, Module: ActiveDirectory - krb5_credential - submissing new requests to new host 2013-10-25 14:19:13.239360 PDT - 10544.20463, Node: /Active Directory, Module: ActiveDirectory - krb5_credential - connecting to host: tcp 192.168.0.1:kerberos (192.168.0.1) tid: 00030001 2013-10-25 14:19:13.239429 PDT - 10544.20463, Node: /Active Directory, Module: ActiveDirectory - krb5_credential - connecting to 11: tcp 192.168.0.1:kerberos (192.168.0.1) tid: 00030001 2013-10-25 14:19:13.239683 PDT - 10544.20463, Node: /Active Directory, Module: ActiveDirectory - krb5_credential - writing packet: tcp 192.168.0.1:kerberos (192.168.0.1) tid: 00030001 2013-10-25 14:19:13.240350 PDT - 10544.20463, Node: /Active Directory, Module: ActiveDirectory - krb5_credential - reading packet: tcp 192.168.0.1:kerberos (192.168.0.1) tid: 00030001 2013-10-25 14:19:13.240387 PDT - 10544.20463, Node: /Active Directory, Module: ActiveDirectory - krb5_credential - host completed: tcp 192.168.0.1:kerberos (192.168.0.1) tid: 00030001 2013-10-25 14:19:13.240415 PDT - 10544.20463, Node: /Active Directory, Module: ActiveDirectory - krb5_credential - krb5_sendto_context DOMAIN.COM done: 0 hosts 1 packets 1 wc: 0.001578 nr: 0.000000 kh: 0.000445 tid: 00030001 2013-10-25 14:19:13.240514 PDT - 10544.20463, Node: /Active Directory, Module: ActiveDirectory - krb5_credential - krb5_get_credentials_with_flags: DOMAIN.COM wc: 0.003615 2013-10-25 14:19:13.240537 PDT - 10544.20463, Node: /Active Directory, Module: ActiveDirectory - valid credentials for [email protected] 2013-10-25 14:19:13.240541 PDT - 10544.20463, Node: /Active Directory, Module: ActiveDirectory - switching to cache 'MEMORY:0x7fa713635470' 2013-10-25 14:19:13.240545 PDT - 10544.20463, Node: /Active Directory, Module: ActiveDirectory - switching GSS to cache 'MEMORY:0x7fa713635470 2013-10-25 14:19:13.240555 PDT - 10544.20463, Node: /Active Directory, Module: ActiveDirectory - Bind Step 5 - Bind/Join computer to domain - 'domain.com' 2013-10-25 14:19:13.241345 PDT - 10544.20463, Node: /Active Directory, Module: ActiveDirectory - resolving 'server.domain.com' 2013-10-25 14:19:13.241646 PDT - 10544.20463, Node: /Active Directory, Module: ActiveDirectory - added socket 12 for host 'server.domain.com:389' address '192.168.0.2' to kqueue list 2013-10-25 14:19:13.241930 PDT - 10544.20463, Node: /Active Directory, Module: ActiveDirectory - Setting kerberos server for 'Kerberos:DOMAIN.COM' to 'server.domain.com' 2013-10-25 14:19:13.241962 PDT - 10544.20463, Node: /Active Directory, Module: ActiveDirectory - switching to cache 'MEMORY:0x7fa713635470' 2013-10-25 14:19:13.241969 PDT - 10544.20463, Node: /Active Directory, Module: ActiveDirectory - switching GSS to cache 'MEMORY:0x7fa713635470 2013-10-25 14:19:13.242231 PDT - 10544.20463, Node: /Active Directory, Module: ActiveDirectory - GSSAPI allow Confidentiality 2013-10-25 14:19:13.242234 PDT - 10544.20463, Node: /Active Directory, Module: ActiveDirectory - setting realm 'DOMAIN.COM' for node '/Active Directory/domain.com' 2013-10-25 14:19:13.242239 PDT - 10544.20463, Node: /Active Directory, Module: ActiveDirectory - GSSAPI allow Integrity (signing) 2013-10-25 14:19:13.242274 PDT - 10544.20463, Node: /Active Directory, Module: ActiveDirectory - GSSAPI using hostname 'server.domain.com' 2013-10-25 14:19:13.242282 PDT - 10544.20463, Node: /Active Directory, Module: ActiveDirectory - GSSAPI using initiator credential '[email protected]' 2013-10-25 14:19:13.250771 PDT - 10544.20463, Node: /Active Directory, Module: ActiveDirectory - Authenticate to LDAP using Kerberos credential - 0 2013-10-25 14:19:13.250784 PDT - 10544.20463, Node: /Active Directory, Module: ActiveDirectory - verified connectivity to '192.168.0.2' with socket 12 2013-10-25 14:19:13.251513 PDT - 10544.20463, Node: /Active Directory, Module: ActiveDirectory - locating site using domain domain.com using CLDAP 2013-10-25 14:19:13.252145 PDT - 10544.20463, Node: /Active Directory, Module: ActiveDirectory - using site of 'DOMAINGROUP' from CLDAP 2013-10-25 14:19:13.253626 PDT - 10544.20463, Node: /Active Directory, Module: ActiveDirectory - resolving 'server2.domain.com' 2013-10-25 14:19:13.253933 PDT - 10544.20463, Node: /Active Directory, Module: ActiveDirectory - added socket 13 for host 'server2.domain.com:389' address '192.168.0.1' to kqueue list 2013-10-25 14:19:13.254428 PDT - 10544.20463, Node: /Active Directory, Module: ActiveDirectory - Setting kerberos server for 'Kerberos:DOMAIN.COM' to 'server2.domain.com' 2013-10-25 14:19:13.254462 PDT - 10544.20463, Node: /Active Directory, Module: ActiveDirectory - switching to cache 'MEMORY:0x7fa713635470' 2013-10-25 14:19:13.254468 PDT - 10544.20463, Node: /Active Directory, Module: ActiveDirectory - switching GSS to cache 'MEMORY:0x7fa713635470 2013-10-25 14:19:13.254617 PDT - 10544.20463, Node: /Active Directory, Module: ActiveDirectory - setting realm 'DOMAIN.COM' for node '/Active Directory/domain.com' 2013-10-25 14:19:13.254661 PDT - 10544.20463, Node: /Active Directory, Module: ActiveDirectory - GSSAPI allow Confidentiality 2013-10-25 14:19:13.254670 PDT - 10544.20463, Node: /Active Directory, Module: ActiveDirectory - GSSAPI allow Integrity (signing) 2013-10-25 14:19:13.254689 PDT - 10544.20463, Node: /Active Directory, Module: ActiveDirectory - GSSAPI using hostname 'server2.domain.com' 2013-10-25 14:19:13.254695 PDT - 10544.20463, Node: /Active Directory, Module: ActiveDirectory - GSSAPI using initiator credential '[email protected]' 2013-10-25 14:19:13.262092 PDT - 10544.20463, Node: /Active Directory, Module: ActiveDirectory - Authenticate to LDAP using Kerberos credential - 0 2013-10-25 14:19:13.262108 PDT - 10544.20463, Node: /Active Directory, Module: ActiveDirectory - verified connectivity to '192.168.0.1' with socket 13 2013-10-25 14:19:13.262982 PDT - 10544.20463, Node: /Active Directory, Module: ActiveDirectory - Computer account either already exists or DC is already Read/Write 2013-10-25 14:19:13.264968 PDT - 10544.20463, Node: /Active Directory, Module: ActiveDirectory - Adding record 'cn=spike,CN=Computers,DC=domain,DC=com' in 'domain.com' The failure point seems to be Computer account either already exists or DC is already Read/Write, however, I can search for 'spike' on the Active Directory server using Active Directory Explorer and it's not there. If I do the same search for the Linux and Windows PCs I added previously, I can find them.

  Read the article

• Why is my mouse randomly deselecting and unclicking?

  - by Coldblackice

  (Windows 7 x64, Logitech MX1100 mouse) If I click/hold/ the mouse, like on the title bar of a folder to move it, or to select text, the mouse will randomly "unselect" it and then randomly reselect at another point in the movement. For example, if I were to start mouse-selecting the above paragraph, starting with "movement." and then moving backwards, it might select as far as "reselect", but then the selection would disappear, only to start selecting again from "will randomly". I realize this would sound like a clear-cut case for a hardware issue in the mouse button, but I've narrowed out that that's not the case. The problem doesn't happen if I drag-move/drag-select slowly. But I can make the problem very apparent if I click and drag something fast. For example, if I click and hold the title bar of a window, and then start quickly dragging it around in circles across my monitor, the window will get "dropped", and a new window will get picked up in the process. Additionally, if I right-click anywhere to get a context menu (in Windows, programs, anywhere/everywhere), and then relatively quickly press the left mouse button to select something on the context menu, the context menu will disappear as if I had clicked "through" it. I haven't had any driver changes, system updates, or significant software changes/updates/installations recently, that might be a precursor to this issue. Again, the oddity seems to be the "speed" of action. Another note -- it seems that "lag" has a bit to do with it. If I click and drag a window around quickly, it might start to "lag" a tad bit, like it's perhaps moving too fast for Windows to keep up with the refresh/redraw rate, and that's usually synonymous with this odd deselect bug happening. (Batteries fully charged, no damage or recent changes to mouse, no changes that might affect/block wireless communication)

  Read the article

• Windows 2008 RemoteAPP client disconnects within a matter of minutes

  - by Jeroen Wilke

  I'm having an odd problem with Windows 2008 TS, and remote applications specifically. The situation is as follows: TS idle timeout is disabled via GPO TS terminating disconnected sessions after 1hr (via GPO) My users can log on to the Terminal server, and get a full desktop, OR via rdp files that give access to a few remote applications. When a user connects to a full desktop, everything is fine and dandy, they will remain logged on indefinately, and when they disconnect the session is terminated after an hour. however, when a user connects using a remote application link, the client seems to disconnect after only a few minutes of inactivity, when you click the window, the session reconnects. EventID's on TS server: 4779: This event is generated when a user disconnects from an existing Terminal Services session, or when a user switches away from an existing destop using Fast User Switching. 4778 : This event is generated when a user reconnects to an existing Terminal Services session, or when a user switches to an existing desktop using Fast User Switching users are connecting directly to 3389, not using a TS-gateway at the moment. This behavior is consistent on different clients that we have, Full desktop is fine, RemoteAPP constantly disconnects. The .rdp file used doesn't list any interesting parameters, aside from what application to launch, and where to find it. Can someone explain to me how there can be a difference in behaviour between full desktop, and remoteapp ? since essentially they use the exact same client ? Regards Jeroen

  Read the article

• Problem setting command-line console resolution. vbeinfo in grub2 does not report all resolutions

  - by Kent

  I have a Asus EEE PC 1005P which I installed a Command-line system on using the Alternate Installer CD of Ubuntu Lucid Lynx. Altough I think this is a general linux and grub2 question. I do not have (or want) the X Window System installed. I want to change my console screen resolution (not inside X) to 1024x600. But it isn't reported when I use vbeinfo inside grub: grub> vbeinfo VBE info: version: 3.0 OEM software rev: 1.0 total memory: 8128 KiB List of compatible video modes: Legend: P=Packed pixel, D=Direct color, mask/pos=R/G/B/reserved 0x112: 640 x 480 x 32 Direct, mask: 8/8/8/8 pos: 16/8/0/24 0x114: 800 x 600 x 16 Direct, mask: 5/6/5/0 pos: 11/5/0/0 0x115: 800 x 600 x 32 Direct, mask: 8/8/8/8 pos: 16/8/0/24 0x101: 640 x 480 x 8 Packed 0x103: 800 x 600 x 8 Packed 0x111: 640 x 480 x 16 Direct, mask: 5/6/5/0 pos: 11/5/0/0 Configured VBE mode (vbe_mode) = ox101 grub> Relevant parts of sudo lspci -v: ... ... 00:02.0 VGA compatible controller: Intel Corporation N10 Family Integrated Graphics Controller Subsystem: ASUSTeK Computer Inc. Device 83ac Flags: bus master, fast devsel, latency 0, IRQ 28 ... Kernel driver in use: i915 Kernel modules: i915 00:02.1 Display controller: Intel Corporation N10 Family Integrated Graphics Controller Subsystem: ASUSTeK Computer Inc. Device 83ac Flags: bus master, fast devsel, latency 0, IRQ 28 ... ... ... Any ideas on how I can set the console resultion like I want it?

  Read the article

• Which apache/mysql/php package is best for windows?

  - by crosenblum

  I have tried appservnetwork, was the best so far, but I haven't seen them do an update in ages, EasyPHP is just slow to load always. Wamp and Xamp, all put in their description that is not for production. I do not plan to host publicly this site or site's I am working on. But I do want a fast loading apache/mysql/php server for development purposes. I used to really like WLMP, which is Lighttpd for Windows, but that project seems unupdated or abandoned. I refuse to use IIS, but i have no desire to get into any wars over it. I run windows xp sp3 at my home pc. I will need to have a web server setup for professional work, as well as some fun websites I am working on. I just want it fast enough, so i can run it via localhost, and not take forever to load in the browser. Thank you... I plan mostly do php programming and perhaps coldfusion via this.

  Read the article

• Linux Kernel Packet Forwarding Performance

  - by Bob Somers

  I've been using a Linux box as a router for some time now. Nothing too fancy, just enabling forwarding in the kernel, turning on masquerading, and setting up iptables to poke a few holes in the firewall. Recently a friend of mine pointed out a performance problem. Single TCP connections seem to experience very poor performance. You have to open multiple parallel TCP connections to get decent speed. For example, I have a 10 Mbit internet connection. When I download a file from a known-fast source using something like the DownThemAll! extension for Firefox (which opens multiple parallel TCP connections) I can get it to max out my downstream bandwidth at around 1 MB/s. However, when I download the same file using the built-in download manager in Firefox (uses only a single TCP connection) it starts fast and the speed tanks until it tops out around 100 KB/s to 350 KB/s. I've checked the internal network and it doesn't seem to have any problems. Everything goes through a 100 Mbit switch. I've also run iperf both internally (from the router to my desktop) and externally (from my desktop to a Linux box I own out on the net) and haven't seen any problems. It tops out around 1 MB/s like it should. Speedtest.net also reports 10 Mbits speeds. The load on the Linux machine is around 0.00, 0.00, 0.00 all the time, and it's got plenty of free RAM. It's an older laptop with a Pentium M 1.6 GHz processor and 1 GB of RAM. The internal network is connected to the built in Intel NIC and the cable modem is connected to a Netgear FA511 32-bit PCMCIA network card. I think the problem is with the packet forwarding in the router, but I honestly am not sure where the problem could be. Is there anything that would substantially slow down a single TCP stream?

  Read the article

• Acer Aspire One getting extremely hot

  - by ascom

  I have an Acer Aspire One D250-1197. I really better type fast before it overheats again... For some reason, I'm having a problem with heat on my netbook only when I run Joli OS (Ubuntu 9.10 LTS?). When I leave it idle, with nothing running (other than the regular Joli OS desktop and a couple of doing-nothing terminals), heat slowly builds up to the point where the netbook is burning hot to the touch. I have never had this problem when running Windows 7 Starter (even though it gives me plenty of other headaches). It seems that the fan is spinning, but not fast enough to keep up with the heat buildup. Is there something wrong with the fan drivers? The computer doesn't seem to recognize that it is overheating. What can I do to solve this problem (other than shut it off or use Windows)? I'm currently on the wrong side of Earth (I mean, on vacation), so I just need a temporary fix, such as a driver I can install. Also, I have to use Linux, because I have to share out the wired connection in hotels wirelessly to the iPhones. EDIT: I'm switching from Joli OS to a more "proper" and up to date distribution (Xubuntu 13.04). I'll see if it still has the heat problem and try @nod's cpufreq idea.

  Read the article

• High Apache CPU usage, but low nginx - Configured correctly?

  - by Buckers

  We've just moved a website of ours over to a brand new high-spec Linux server (1x Intel Xeon E3-1230 v2 @ 3.30GHz, 8GB DDR3 ECC, 2x 128GB SATA SSD RAID1). The server has been configured to use nginx but we're not sure if its working correctly. The site always loads very fast to us (http://www.onedirection.net), but Plesk often sends us reports that the Apache CPU usage percentage reaches high leves, yet when we look at the nginx percentage it's always very low. We've come from a Windows background so are very new to Linux, but shouldn't nginx run INSTEAD of apache? Here's a screenshot from Plesk showing the CPU usage: http://www.pixelkicks.co.uk/_download/plesk.JPG The website gets around 20,000 visitors per day, and we use W3 Total Cache to get it running as fast as possible. MySQL has been optimised well. Memory usage is only running at 2GB of the 8GB. Does this look right? How can we tell that nginx is doing most of the work? Thanks, Chris.

  Read the article

• WS2008 NTP - Using time.windows.com,0x9 - Time always skewed forwards

  - by David

  I have a domain controller configured to use time.windows.com (with 0x09 flags set). I've noticed that frequently the systems' clock is fast - it varies from 10 minutes to even 45 minutes. I always have to keep resetting the system date/time back to what it should be. When I run "w32tm /query /source" it tells me it's using time.windows.com, and obviously I trust Microsoft not to serve incorrect times, but why is my server's clock fast? EDIT: There are a few Time-Service events in the System log: Event ID: 142 Message: The time service has stopped advertising as a time source because the local clock is not synchronized. Event ID: 139 Message: The time service has started advertising as a time source. These two messages appear in pairs every hour or so. Event 142 appears 14 to 16 minutes after 139 appears. Going back a few months, these events appear: Event ID: 35 Message: The time service is now synchronizing the system time with the time source time.windows.com,0x9 (ntp.m|0x9|0.0.0.0:123-65.55.21.21:123). Event ID: 37 Message: The time provider NtpClient is currently receiving valid time data from time.windows.com,0x9 (ntp.m|0x9|0.0.0.0:123-65.55.21.21:123). Event ID: 47 Message: Time Provider NtpClient: No valid response has been received from manually configured peer time.windows.com,0x9 after 8 attempts to contact it. This peer will be discarded as a time source and NtpClient will attempt to discover a new peer with this DNS name. The error was: The time sample was rejected because: The peer is not synchronized, or it has been too long since the peer's last synchronization. These three events only appear once in the log, back in October.

  Read the article

• Strange performance differences in read/write from/to USB flash drive

  - by Mario De Schaepmeester

  When copying files from my 8GB USB 2.0 flash drive with Windows 7 to a traditional hard drive, the average speed is between 25 and 30 MB/s. When doing the reverse, copying to the USB drive, the speed is 5MB/s average. I have tested this with about 4.5GB of files, a mixture of smaller and larger ones. The observations were the same on both FAT32 and exFAT file systems on the USB drive, NTFS on the internal hard disk. I don't think I can be mistaken in saying that flash memory has a lot higher performance than a spinning hard drive in both terms of reading and writing. For both memory types, reading should be faster than writing too. Now I wonder, how can it be that copying files from a fast read memory to a faster write memory is actually slower than copying files from a fast read memory to a slow write memory? I think that the files are stored in RAM before being copied over too, and there's caching as well, but I don't see how even that could tip the balance. It can only be in the advantage of writing to the USB drive, since it is "closer" to the SATA system than the USB port and it will receive data from the internal SATA HDD faster. Perhaps my way of thinking is all wrong or it just depends on the manufacturer of the USB pen. But I am curious.

  Read the article

• Nginx's speed, and how to replicate it [migrated]

  - by Mediocre Gopher

  I'm interested in this from more than an academic standpoint rather than a practical standpoint; I don't plan on creating a production webserver to compete with nginx. What I'm wondering is how exactly nginx is so fast. The top google response for this is this thread, but it merely links to a cryptic slideshow and a general covering of different io strategies. All other results seem to simply describe how fast nginx is, rather then the reason. I tried building a simple erlang server to try to compete with nginx, but to no avail; nginx won out. All my server does is spawn a new process for each request, uses that process to read the file to a socket, then closes the file and kills the thread. It's not complicated, but given erlang's lightweight processes and underlying aio structure I thought it would compete, but nginx still wins out by a consistent 300 ms average under a heavy stress test. What is nginx doing that my simple server isn't? My first thought would be keeping files in main memory instead of tossing them between requests, but the filesystem cache does this already so I didn't think it would make that great of difference. Am I wrong? Or is there something else that I'm missing?

  Read the article

• Advice needed for a home network setup (hardware & software) to handle many clients and potentially heavy traffic

  - by posdef

  I have recently decided to re-structure the home network of our flatshare here. Here's a quick outline of the situation. I envision to have the following 4 devices connected to the router via cable: Xbox 360 IP phone Printer QNAP server (Web, File and Multimedia) We are three people living here, so on top of that there will be to 5-6 computers/mobile devices connecting as wireless clients. My goal is to be able to transfer files (when needed) between the computer and the Multimedia server, which I can reach via 360 and play on the TV. I also would like to keep a high level of security; right now I have the encryption on WPA2 and MAC filtering. I don't believe the web server will get heavy traffic, though I would like to have it responsive. Likewise, I don't have a habit of downloading via torrent etc, but I greatly appreciate my network being responsive and fast, especially when I am browsing or streaming high quality media. Now my questions are: is this setup feasible? smart? efficient? can this be improved somehow? my current router (D-Link DI624) and the previous one (DI-524) used to have spontaneous drops in network, which I find highly irritating. I don't believe in my router, especially now that it completely crashed when I was test-running the setup by transferring a large media file to server while xbox was playing music from the server, and two computers browsing the net. Do I need to get new hardware, if so, any recommendations for a reliable and fast router?

  Read the article

• Windows 2008 RemoteAPP client disconnects within a matter of minutes.

  - by Jeroen Wilke

  I'm having an odd problem with Windows 2008 TS, and remote applications specifically. The situation is as follows: TS idle timeout is disabled via GPO TS terminating disconnected sessions after 1hr (via GPO) My users can log on to the Terminal server, and get a full desktop, OR via rdp files that give access to a few remote applications. When a user connects to a full desktop, everything is fine and dandy, they will remain logged on indefinately, and when they disconnect the session is terminated after an hour. however, when a user connects using a remote application link, the client seems to disconnect after only a few minutes of inactivity, when you click the window, the session reconnects. EventID's on TS server: 4779: This event is generated when a user disconnects from an existing Terminal Services session, or when a user switches away from an existing destop using Fast User Switching. 4778 : This event is generated when a user reconnects to an existing Terminal Services session, or when a user switches to an existing desktop using Fast User Switching users are connecting directly to 3389, not using a TS-gateway at the moment. This behavior is consistent on different clients that we have, Full desktop is fine, RemoteAPP constantly disconnects. The .rdp file used doesn't list any interesting parameters, aside from what application to launch, and where to find it. Can someone explain to me how there can be a difference in behaviour between full desktop, and remoteapp ? since essentially they use the exact same client ? Regards Jeroen

  Read the article

• Raid-5 Performance per spindle scaling

  - by Bill N.

  So I am stuck in a corner, I have a storage project that is limited to 24 spindles, and requires heavy random Write (the corresponding read side is purely sequential). Needs every bit of space on my Drives, ~13TB total in a n-1 raid-5, and has to go fast, over 2GB/s sort of fast. The obvious answer is to use a Stripe/Concat (Raid-0/1), or better yet a raid-10 in place of the raid-5, but that is disallowed for reasons beyond my control. So I am here asking for help in getting a sub optimal configuration to be as good as it can be. The array built on direct attached SAS-2 10K rpm drives, backed by a ARECA 18xx series controller with 4GB of cache. 64k array stripes and an 4K stripe aligned XFS File system, with 24 Allocation groups (to avoid some of the penalty for being raid 5). The heart of my question is this: In the same setup with 6 spindles/AG's I see a near disk limited performance on the write, ~100MB/s per spindle, at 12 spindles I see that drop to ~80MB/s and at 24 ~60MB/s. I would expect that with a distributed parity and matched AG's, the performance should scale with the # of spindles, or be worse at small spindle counts, but this array is doing the opposite. What am I missing ? Should Raid-5 performance scale with # of spindles ? Many thanks for your answers and any ideas, input, or guidance. --Bill Edit: Improving RAID performance The other relevant thread I was able to find, discusses some of the same issues in the answers, though it still leaves me with out an answer on the performance scaling.

  Read the article

• Streaming to PS3 with NAS and built-in dlna server?

  - by philt

  With consumer-grade hardware, is it possible to successfully stream 1080p mp4 videos to a PS3? I have a linksys router that can only do 10/100. The PS3 is wired to it with cat5e cable, and the PS3 itself supports gigabit ethernet. I would upgrade the router and get one that supports gigabit ethernet if it could handle streaming like this. It currently does work with minor jerkiness streaming from my mac to the PS3, but fast-forward/reverse and "goto" (equivalent of scene selection) take forever and/or fail completely. And streaming from my mac of course requires the mac to be on at all times. When I put the movies on an external USB drive and connect to the PS3 directly, it performs flawlessly. Fast forward and everything works great. So I was thinking about getting a NAS, but I don't know if any inexpensive NAS (i.e. Buffalo Linkstation Live, WD My Book World Edition, D-Link DNS-321, etc.) can actually deliver the performance necessary to do this, even with gigabit ethernet?

  Read the article

• MySQL Server Is Slow

  - by user2853965746

  I have two MySQL servers and one was just recently setup. The one I just recently setup is a bit slower than my older one, which kind of bothers me because I don't want my clients to be upset with the speed difference when I launch the new one. The older server runs on Ubuntu (~13.04 I believe) and the new one is on Debian 6. Both servers are 2GB ram, but my newer server is has an SSD, so I thought it might be the same speed if not faster. Anyway, the speed difference isn't too much (both are still under a second, but still noticeable). Whenever I select 50 rows from the user table on my older server (SELECT * FROM users LIMIT 50), I get the results in 0.003 s. There is 100,000+ accounts in that table. Whenever running the same command on the same table with only six dev accounts, it takes 0.069 s. It may not seem like a lot, but it's noticeable when you're used to a fast response. I added skip-name-resolve to the config and it didn't seem to help. Basically I'm asking if anyone knows what can cause a MySQL server to be slow in Debian 6? Should I just drop it and switch to Ubuntu like the older server (I don't think the OS is the problem, but you never know)? The older server is under a lot of use too, it's used a lot for web api's on my website. A lot of connections and stuff, and it still remains fast.

  Read the article

• Why are Microsoft Windows Update taking so long to install?

  - by Mathieu Pagé

  Hi, I have a question that is not related to a problem I have. Just something I'd like to understand. Why are Windows update so long? First Windows Update need to find witch updates you needs and this take about 5 minutes. What is happening behind the scene during those 5 minutes? I would have tought that it would be enough to compare the updates you already have to the complete list of updates or to check the version numbers of a couples files. Then when it comes time to install the upgrades, they're also taking a long time. Some 1 Mb updates takes 2, 3 or 5 minutes to install. What is taking so long. I would have though that it was simply a mater of backup the old file, uncompress the new files, replace the old file. This should be really fast. Is Windows doing something else? For comparison, under Linux, you can find which updates you need in about 20 seconds and installing them is usually pretty fast (The time to uncompress the files). I can do a complete updgrade of my linux machine in about 25 minutes (download 600-800 Mb of updates, hundreds of them and install them) while under windows 25 minutes is the time it needs to find witch update are needed and install about 5-10 updates. I just updated a Windows XP home from SP1a to SP3 + all other updates. It took me more than 3 hours. Doing something like that in the Linux World takes about 30 minutes. I don't want to bash Microsoft here. I genuinly want to know what they do differently that makes it so long.

  Read the article

• Apache2 slow serving static while healthy

  - by user45339

  My Apache status looks like; 201 requests/sec - 98.8 kB/second - 504 B/request 85 requests currently being processed, 345 idle workers _____CCW_C_____C__C__C_R____C_WC_________C__C____CW__C__CCC_____ __C____W______C___C___CW__C_C______C__W_C__C_____CCC____C______R CC_C_______C___C____C______________C______C__C________________C_ ___________________C______________________C_______C___C_____C___ CC____C__C___R_____C_C_CC__________C___C___________R____C_C_C___ ______C______W_W__W___C____________________C__WCC__R__R_C_______ R__RC________________________C___R____W__C____.................. .................................................... Server load is average 2 on a 4 core machine. IO utilization is 10-15% and doesn't have many jumps over 70%. Machine has almost 4 gb free and uses 0 swap. The site on the machine is a PHP site. All PHP code is optimized and fast mostly when it gets accessed, however sometimes requests get stuck. Stuck meaning; no response for at least 10 sec. We debugged the PHP code, but it is quite optimal and fast. We spend a lot of time on it until we decided to test the requesting of: <html><body>test</body></html> test.html page. This static resource also gets 'stuck' in the same manner the php pages get 'stuck'. How is the possible given the health of the system? I tested the network, but, when the PHP shows 'slowness' in the site monitoring, the html test files also take (far longer) than 10 sec to load using; time lynx -dump http://127.0.0.1/test.html We are kind of desperate to solve this problem, but we cannot seem to tackle it.

  Read the article

• how to define service runlevel order position?

  - by DmitrySemenov

  I setup bind-dlz and need mysql start prior NAMED when system starts here is what I have [root@semenov]# ./test.sh mysql 0:off 1:off 2:on 3:on 4:on 5:on 6:off named 0:off 1:off 2:off 3:on 4:on 5:on 6:off lrwxrwxrwx. 1 root root 15 Apr 15 18:57 /etc/rc3.d/S93mysql -> ../init.d/mysql lrwxrwxrwx. 1 root root 15 Apr 15 18:57 /etc/rc3.d/S90named -> ../init.d/named here is what I have in mysql init script # Comments to support chkconfig on RedHat Linux # chkconfig: 2345 84 16 # description: A very fast and reliable SQL database engine. # Comments to support LSB init script conventions ### BEGIN INIT INFO # Provides: mysql # Required-Start: $local_fs $network $remote_fs # Should-Start: ypbind nscd ldap ntpd xntpd # Required-Stop: $local_fs $network $remote_fs # Default-Start: 2 3 4 5 # Default-Stop: 0 1 6 # Short-Description: start and stop MySQL # Description: MySQL is a very fast and reliable SQL database engine. ### END INIT INFO so when I remove named from chkconfig and have there just mysql, it starts with order number 84: /etc/rc3.d/S84mysql - ../init.d/mysql but when I add named inside chkconfig it's order changes to 93: /etc/rc3.d/S93mysql - ../init.d/mysql as a result mysql will be starting after named and named will fail (no sql available) any ideas what I'm doing wrong? here is what I have in named init script # chkconfig: 345 90 16 # description: named (BIND) is a Domain Name Server (DNS) \ # that is used to resolve host names to IP addresses. # probe: true ### BEGIN INIT INFO # Provides: $named # Required-Start: $local_fs $network $syslog # Required-Stop: $local_fs $network $syslog # Default-Start:2 3 4 # Default-Stop: 0 1 2 3 4 5 6 # Short-Description: start|stop|status|restart|try-restart|reload|force-reload DNS server # Description: control ISC BIND implementation of DNS server ### END INIT INFO thanks, Dmitry

  Read the article

• fcgiwrap listening to a unix socket file: how to change file permissions

  - by user36520

  I have a web server (nginx) and a CGI application (gitweb) that is ran with fcgiwrap to enable Fast CGI access to it. I want the Fast CGI protocol to take place over a unix socket file. To start the fcgiwrap daemon, I run: setuidgid git fcgiwrap -s "unix:$PWD/fastcgi.sock" (this is a daemontools daemon) The problem is that my web server runs as the user www-data and not the user git. And fcgiwrap creates the socket fastcgi.sock with user git, group git and read only fort the non owner. Thus, nginc with the user www-data can't access the socket. Apparently, fcgiwrap is not able to select permissions of unix socket files. And this is quite annoying. Moreover, if I manage to have the socket file exists before I run fcgiwrap (which is quite difficult given I did not find any shell command to create a socket file), it quits with the following error: Failed to bind: Address already in use The only solution I found is to start the server the following way: rm -f fastcgi.sock # Ensure that the socket doesn't already exists (sleep 5; chgrp www-data fastcgi.sock; chmod g+w fastcgi.sock) & exec setuidgid git fcgiwrap -s "unix:$PWD/fastcgi.sock" Which is far from the most elegant solution. Can you think of anything better ? Thanks

  Read the article

• Which HDD brand do you ..trust

  - by Shiki

  Okay it says its 'subjective' but I believe it's not. Basically I want to ask the community about your preference. Not really 'preference' but actual experience. Like if you never had a problem with Western Digital, then write that in an answer, or if there is one with WD, just vote it up. And so on. (Heard so many stories, experiences. I only had Samsung, Maxtor, WD, Seagate HDDs. Samsung died with bad blocks, had anomalies. Maxtor died so fast I couldn't even try it really and it's really hot, loud. Seagate is just as loud as a jet plane, and moderately hot. My WD (green) is quiet, really cool and somewhat fast. That's all I have about experiences. So I would say Western Digital in an answer (OR Hitachi. Never had one yet, but every expert I know says I should get one since they even had problems with WD but Hitachi seems to be ok. (My laptop comes with Hitachi hdd but I don't think its really relevant.)) Basically I mean desktop 7200RPM HDDs here. Well.. notebook HDDs are ok also, but no raptor/scsi/server ones. Hope you get what I meant and it won't get closed.

  Read the article

• Weird mouse behaviour. Debian wheezy

  - by DevNoob

  When I move my mouse slowly over the desktop the pointer jumps often a few pixels (one or two) in the opposite direction of which I move my mouse. Horribly when trying to set the cursor around some semicolons in eclipse. I guess this is the result of a wrong set resolution of it. I suppose this is because the mouse was set initially really fast and even if I do xset 1/2 3, the mouse is just to fast and unprecise for me. It aready tried to configure the xorg.conf like this: Section "InputDevice" Identifier "Configured Mouse" Driver "mouse" Option "Device" "/dev/mouse" Option "Protocol" "Auto" Option "Name" "Logitech G3" Option "Resolution" "2000" EndSection But with no effect. Maybe because there is no /dev/mouse. This ist the content of dev. Maybe you can tell me which one is the mouse. autofs block bsg btrfs-control bus cdrom cdrw char console core cpu cpu_dma_latency disk dvd dvdrw fd fd0 full fuse fw0 hidraw0 hidraw1 hpet input kmsg log loop0 loop1 loop2 loop3 loop4 loop5 loop6 loop7 loop-control MAKEDEV mapper mcelog mem net network_latency network_throughput null nvidia0 nvidiactl oldmem port ppp printer psaux ptmx pts random rfkill root rtc rtc0 sda sda1 sda2 sda3 sda5 sda6 sda7 sda8 sdb sdb1 sg0 sg1 sg2 shm snapshot snd sndstat sr0 stderr stdin stdout tty tty0 tty1 tty10 tty11 tty12 tty13 tty14 tty15 tty16 tty17 tty18 tty19 tty2 tty20 tty21 tty22 tty23 tty24 tty25 tty26 tty27 tty28 tty29 tty3 tty30 tty31 tty32 tty33 tty34 tty35 tty36 tty37 tty38 tty39 tty4 tty40 tty41 tty42 tty43 tty44 tty45 tty46 tty47 tty48 tty49 tty5 tty50 tty51 tty52 tty53 tty54 tty55 tty56 tty57 tty58 tty59 tty6 tty60 tty61 tty62 tty63 tty7 tty8 tty9 ttyS0 ttyS1 ttyS2 ttyS3 uinput urandom usb vcs vcs1 vcs2 vcs3 vcs4 vcs5 vcs6 vcs7 vcsa vcsa1 vcsa2 vcsa3 vcsa4 vcsa5 vcsa6 vcsa7 vga_arbiter vmci vmmon vmnet0 vmnet1 vmnet8 vsock watchdog xconsole zero So my question is: How do I setup my mouse correctly in Debian wheezy?

  Read the article

< Previous Page | 116 117 118 119 120 121 122 123 124 125 126 127  | Next Page >