Search Results

Search found 4893 results on 196 pages for 'expect'.

Page 120/196 | < Previous Page | 116 117 118 119 120 121 122 123 124 125 126 127  | Next Page >

• Get Python to raise MemoryError instead of eating all my disk space

  - by asmeurer

  If I run a Python program with a memory leak, I would normally expect the program to eventually die with MemoryError. But instead, what happens is that all the virtual memory is used until my disk runs out of space. I am running Mac OS X 10.8 on a retina MacBook Pro. My computer generally has between 10GB to 20GB free. Mac OS X is smart enough to not die completely when the disk runs out of space (rather, it gives me a dialog letting me force quit my GUI programs). Is there a way to make Python just die when it runs out of real memory, or some reasonable amount of virtual memory? This is what happens on Linux, as far as I can tell. I guess Mac OS X is more generous than Linux with virtual memory (the fact that I have an SSD might be part of this; I don't know just how smart OS X is with this stuff). Maybe there's a way to tell the Mac OS X kernel to never use so much virtual memory that leaves less than, say, 5 GB free on the hard drive?

  Read the article

• Safe mode boot with no change on screen but ongoing hard disk activity - why?

  - by omatai

  I have a machine with a dying hard drive - bad sectors are starting to multiply :-( The first sign (24 hours ago) was that it had an unmountable boot volume. At this time, I tried booting to safe mode with command prompt, which worked, after which I rebooted normally and ran a chkdsk. It has since been working as well as I could expect, but slowly getting less reliable. So I scheduled another chkdsk on both partitions (C: - boot, D: - data), having freed up a lot of space on both partitions to give Windows a little more scope for repairs (hopefully?). I then rebooted. On reboot, it protested about the unmountable boot volume again, so I booted to safe mode. I got the same list of drivers loaded as yesterday, and then no change to the screen for the past 2 hours. However, I see a flickering hard drive indicator light - not always on, but seldom ever off. What is happening? Is the chkdsk that runs in safe mode one which produces nothing on the screen and so chkdsk could be doing its thing... or is Windows still trying (but failing) to boot into Safe Mode?

  Read the article

• Removing SCIM input method as default from gnome terminal

  - by Mark

  Hello - I am recently back into the Linux world after about a 10 year absence. While I can find my way around most things, terminals and desktop managers are different than I remember. One of the biggest problems that I am encountering today is that when running a gnome terminal (this is Suse 10.0 enterprise), I'm getting behavior in the window that I don't want. Specifically, when I type, my typing is underlined as if something is trying to spell check my window. Further, it seems as if when running vi or less, my keystrokes are only processed by these apps when I hit 'return'. I.e. if I'm running less and want to go back a page, I'll hit b, but nothing happens until I hit 'return'. I seem to have tracked this down to the 'input method". Right clicking in the Gnome terminal allows me to set my input method to one of a dozen values. It seems that currently, it's set to "SCIM Input Method". If I then select 'default' or 'X Input Method', apps (i.e. things like less, vi, and even the bash shell) behave as I would expect. Can someone tell me a) what is this SCIM input method b) how can I make it so that it is not the default? I've poked around various configuration files in my home directory as well as in /etc, but I can't see to find how this is set. I guess as a final question, can I just get rid of SCIM? Or is that tied into the window manager somehow? I do appreciate any clarifications that I can get. Thanks.

  Read the article

• Why Is Web Sharing Broken on My Mac?

  - by Sam Murray-Sutton

  Background: I use my Mac for web development, running copies of web sites locally. I recently installed the Snow Leopard update, which to all intents and purposes seems to have gone fine, except... What's not working? Web-sharing; more specifically I can't turn it on via preferences. The preference pane just hangs when I try to. So Apache doesn't start on reboot. I can start Apache by hand, but I don't know enough to either setup apache to start with the computer, or to properly fix web sharing. Further details My Apache error log shows nothing on when the system boots up (as I would expect). This is the error message when I try to start web sharing from the sharing preference pane. 28/09/2009 10:58:05 System Preferences[834] setInetDServiceEnabled failed with 1 for org.apache.httpd Here's the messages given when I start apache from the command line. [Mon Sep 28 10:35:53 2009] [warn] Init: Session Cache is not configured [hint: SSLSessionCache] [Mon Sep 28 10:35:54 2009] [warn] mod_bonjour: Skipping user 'sams' - index file /Users/sams/Sites/index.html has zero length. [Mon Sep 28 10:35:54 2009] [notice] Digest: generating secret for digest authentication ... [Mon Sep 28 10:35:54 2009] [notice] Digest: done [Mon Sep 28 10:35:54 2009] [notice] Apache/2.2.11 (Unix) mod_ssl/2.2.11 OpenSSL/0.9.8k DAV/2 PHP/5.3.0 Phusion_Passenger/2.2.5 configured -- resuming normal operations Please let me know if you need any further details on this. Any help would be greatly appreciated. UPDATE I have added an answer of my own below - I was able to solve it thanks to being pointed in the right direction by the comments below, so thanks very much. But I'm still not totally clear as to what caused the problem or how my solution addressed it, so I'm leaving the question open for now.

  Read the article

• Does Windows XP automatically reassemble UDP fragments?

  - by Matt Davis

  I've got a Windows application that receives and processes XML messages transmitted via UDP. The application collects the data using Windows "raw" sockets, so the entire layer 3 packet is visible. We've recently run across a problem that has me stumped. If the XML messages (i.e., UDP packets) are large (i.e., 1500 bytes), they get fragmented as expected. Ordinarily, this will cause the XML processor to fail because it attempts to process each UDP packet as if it is a complete XML message. This is a known short-coming in the system at this stage of its development. On Windows 7, this is exactly what happens. The fragments are received and logged, but no processing occurs. On Windows XP, however, the same fragments are seen, and the XML processor seems to handle everything just fine. Does Windows XP automatically reassemble UDP fragments? I guess I could expect this for a normal UDP socket, but it's not expected behavior for a "raw" socket, IMO. Further, if this is the case on Windows XP, why isn't the behavior the same on Windows 7? Is there a way to enable this?

  Read the article

• How to configure DNS server to forward queries about particular domain AND all of its subdomains

  - by user71061

  I have DNS server (linux box with bind9), which is authorative for some domains, and forward all other queries to external DNS server of my ISP provider. So far no problem. Now I want that queries about some specific domains were forwarded to my internal DNS server, f.e.: zone "some_domain" { type forward; forwarders { some_internal_dns_ip; }; }; So far still no problem, all works ok. But then, I want also to forward some reverse DNS queries to my internal DNS. So, I have added: zone "16.172.in-addr.arpa" { type forward; forwarders { some_internal_dns_ip; }; }; And this doesn't work as I expect. Queries about "16.172.in-addr.arpa" (for example 1.16.172.in-addr.arpa) are resolved correctly, but reverse queries about full address (for example 1.1.16.172.in-addr.arpa) are not. I understand that my server should use here some recursive query, but could not configure it. I have already tried adding following options recursion yes; allow-recursion { 127.0.0.1; }; allow-recursion-on { 127.0.0.1; }; but with no success . (I have used loopback address here, because I need this functionality only for my DNS host, and not for its clients) Any suggestions?

  Read the article

• "The zone can be scavenged after" keeps incrementing

  - by kce

  What are you trying to do? I'm trying to enable DNS scavenging on a DNS zone that has about a hundred stale DNS records. What have you tried in order to make it happen? I setup DNS Scavenging per everyone's favorite TechNet Blog post: Don't be afraid of DNS Scavenging. Just be patient. I first disabled scavenging on all of our domain controllers: DNSCmd . /ZoneResetScavengeServers contoso.com 192.168.1.1 192.168.1.2 I then enabled automatic scavenging on the DNS zone: I then enabled DNS scavenging on one of the domain controllers: I then found a few records that I expected to get delete with timstamps from a few years ago and ensured that that the Delete this record when it becomes stale and that time stamp was actually set: Finally I reloaded the zone and waited 14 days (the sum of the Refresh + No-Refresh periods). What results did you expect? I expected to see a 2501 Event in the DNS server logs noting the deletion of a bunch of DNS records. What actually happened? Nothing happened. The Zone Aging/Scavenging Properties showed that the zone could be scavenged after 6/12/2014 10:00:00 AM last week. No 2501/2502 events were recorded. All of the records with "aged" time stamps are still present. The date at which the zone can be scavenged after incremented another seven days to ?6/?18/?2014 10:00:00 AM. As I understand it until that date stays at least 14 days in the past nothing will ever even be eligible for scavenging let alone actually be scavenged. The only 2501 events recorded in the event logs are ones that I have triggered by right clicking and selecting "Scavenge Stale Resource Records". They note that scavenging will try to run again in 168 hours which was this morning. I have DNS scavenging enabled for a few months and have waited patiently for something to happen. I have reloaded the zone multiple times (which resets this timestamp). What am I missing here?

  Read the article

• 403 Forbidden when Deploying asp.net 4.0 site to IIS 7

  - by Jordan

  So I have an EC2 instance running, the URL NoWeatherSurprises.com I have the DNS pointing there, and I set up a new site in IIS 7 and pointed it to a folder. I used Visual Studios Web Developer 2010 express to publish to this folder. It now has the binaries and such. However if I go to NoWeatherSurprises.com I get the welcome to IIS 7 screen. I'd expect to go to my application If I navigate to http://noweathersurprises.com/weather/ [weather was the folder I published to under wwwroot] I get a 403 forbidden. I have no idea why, I am guessing that it is trying to do a directory listing or something instead of launching my MVC Application. So 2 problems in summary. It is not pointing the domain to the folder directly and I need to add /weather I am getting a 403 forbidden instead of the results of my home controller with the index action. I am new to IIS 7, I had been using IIS 6 and had a lot less trouble setting it up, but I suspect that's my own fault and i am just missing something. Thanks in advance for any help

  Read the article

• How to get an ARM CPU clock speed in Linux?

  - by MiKy

  I have an ARM-based embedded machine based on S3C2416 board. According to the specifications I have available there should be a 533 MHz ARM9 (ARM926EJ-S according to /proc/cpuinfo), however the software running on it "feels" slow, compared to the same software on my Android phone with a 528MHz ARM CPU. /proc/cpuinfo tells me that BogoMIPS is 266.24. I know that I should not trust BogoMIPS regarding performance ("Bogo" = bogus), however I would like to get a measurement on the actual CPU speed. On x86, I could use the rdtsc instruction to get the time stamp counter, wait a second (sleep(1)), read the counter again to get an approximation on the CPU speed, and according to my experience, this value was close enough to the real CPU speed. How can I find the actual CPU speed of given ARM processor? Update I found this simple Pi calculator, which I compiled both for my Android phone and the ARM board. The results are as follows: S3C2416 # cat /proc/cpuinfo Processor : ARM926EJ-S rev 5 (v5l) BogoMIPS : 266.24 Features : swp half fastmult edsp java ... #./pi_arm 10000 Calculation of PI using FFT and AGM, ver. LG1.1.2-MP1.5.2a.memsave ... 8.50 sec. (real time) Android # cat /proc/cpuinfo Processor : ARMv6-compatible processor rev 2 (v6l) BogoMIPS : 527.56 Features : swp half thumb fastmult edsp java # ./pi_android 10000 Calculation of PI using FFT and AGM, ver. LG1.1.2-MP1.5.2a.memsave ... 5.95 sec. (real time) So it seems that the ARM926EJ-S is slower than my Android phone, but not twice slower as I would expect by the BogoMIPS figures. I am still unsure about the clock speed of the ARM9 CPU.

  Read the article

• IIS High use & Server Performance issues

  - by HaydnWVN

  Have an SBS2011 running Exchange, a database app and a few other things serving 5 users (3 low use, 1 high). The server was never specced for the database app so it isn't as powerful as I'd like... Only 12GB RAM. We have increasingly found performance problems with this server, last week it was so bad I couldn't even connect remotely. To free up some available RAM I have (over the past month or so): Restricted the Exchange Message Store to 1GB with (so far) no ill effects. Restricted SQL Databases (including SBSMonitoring and Sharepoint/##SSEE (Which isn't used)). Now I am finding that IIS Worker threads are using up the available memory and I have (so far) been unable to track down much useful information about restricting them. This server is not 'serving' anything web-based apart from OWA that I am finding people using because Outlook is so slow (again related to the Servers performance). I am aware that Exchange on SBS2011 is designed to use up available resources (and concede when other applications request). But it is not doing so (or anywhere near fast enough) for our needs. Opening the database application (using Postgres) takes 5+ minutes from client machines and regularly times out or crashes due to this. After a reboot (before SQL/Exchange/IIS databases are very large/totally cached) we get the performace we need and expect. Previously a reboot once a month was enough... Then once a week... Now they have taken to rebooting it almost daily!

  Read the article

• Windows 7 - mysteriously missing free HDD space

  - by sYnfo

  I have Windows7 installed on 50GB (Oops, it should have been 45GB, sorry) partition, and every now and then it gets full, and I have to resize that partition. I always thought it is quite normal. But it happened again today and this time, I'm sure it is not normal, because since last resizing (35GB 45GB) I did not install any new apps or whatever. Also, sum of sizes off all, including hidden & system, root folders and files is ~18GB, yet windows is indicating that all 50GB are used up... Any idea what is going on? EDIT: Great tools everyone! (SourceForge appears to be offline at the moment, I'll check WinDirStat later) Alas, non of them solved my problem just yet... Screenshot from SpaceSniffer: On the right there is some kind of "Unknows Space", any idea what that could be? EDIT2: After those two apps failing to help much I didn't expect it, but WinDirStat actually helped. It showed that those missing 27GB are in my Temp folder (Well, that should have been my first guess anyway). There I found hundreds of ~100MB files, named like HTT????.tmp. After some googling it appears to be a problem with ESET NOD32 antivirus and it's ThreatSense feature. Thank you all for help! :)

  Read the article

• Load Testing a Security/Gateway Appliance

  - by Joel Coel

  In a couple weeks I will load testing a security/gateway appliance. We're a small residential college, and that "residential" means the traffic moving through the appliance is a bit like the Wild West. We have everything from Facebook to World of Warcraft, BitTorrent to Netflix, or Halo to YouTube... basically anything you might find in the home of a high-school or college aged person. Somewhere in there some real academic work gets done as well. We rely on our current appliance for traffic shaping, antivirus, malware filtering, intrusion detection on our servers, logging and abuse reporting, and even some content filtering. All this puts a decent load when we have students around, and I'm concerned about the ability of the new candidate to keep up. On paper it should handle things, but I'm worried. Prior experience is that vendors greatly over-report what an appliance can handle. The product also includes a licensed session limit, and I'm also worried that just a few misbehaving students could unwittingly bring us to that limit and cause service disruptions. I need to know this will work for our campus in order to commit to it. Going a performance level higher in that product takes the pricing way out of line with what we expect and have done in the past. What I need is a good way to load test this guy. My problem is that our current level of summer traffic is less than one percent of what it will be when students come back just six weeks from now. Any ideas on how to really stress this thing and see what it can do, in a way that will give me some clear ideas o. How that will scale for our campus? For the curious, I'm looking at a Watchguard 515, but it could be anything. If I were evaluating a competitor, I'd ask the same question.

  Read the article

• Using AddEncoding x-gzip .gz without actual files

  - by STATUS_ACCESS_DENIED

  With Apache (2.2 and later) how can I achieve the following. I want to transparently compress using GZip encoding (not plain Deflate) the output when a certain file is queried with its name plus the extension .gz, where the .gz version doesn't physically exist on disk. So let's say I have a file named /path/foo.bar and no file foo.bar.gz in the folder to which the URI /path maps, how can I get Apache to serve the contents of /path/foo.bar but with AddEncoding x-gzip ... applied to the (non-existing) file? The rewrite part appears to be easy, but the problem is how to apply the encoding to a non-existent item. The other way around also seems to be simple as long as the client supports the encoding. Is the only solution really a script that does this on the fly? I'm aware of mod_deflate and mod_gzip and it is not what I'm looking for - at least not alone. In particular I need an actual GZIP file and not just a deflated stream. Now I was thinking of using mod_ext_filter, but couldn't bridge the gap between rewriting the name of the (non-existent) file.gz to file on one side and the LocationMatch on the other. Here's what I have. RewriteRule ^(.*?\.ext)\.gz$ $1 [L] ExtFilterDefine gzip mode=output cmd="/bin/gzip" <LocationMatch "/my-files/special-path/.*?\.ext\.gz"> AddType application/octet-stream .ext.gz SetOutputFilter gzip Header set Content-Encoding gzip </LocationMatch> Note that the header for Content-Encoding isn't really needed by the clients in this case. They expect to see actual GZIP files, but I want to do this on-the-fly without caching (this is a test scenario).

  Read the article

• nginx rewrite or internal redirection cycle

  - by gyre

  Im banging my head against a table trying to figure out what is causing redirection cycle in my nginx configuration when trying to access URL which does not exist Configuration goes as follows: server { listen 127.0.0.1:8080; server_name .somedomain.com; root /var/www/somedomain.com; access_log /var/log/nginx/somedomain.com-access.nginx.log; error_log /var/log/nginx/somedomain.com-error.nginx.log debug; location ~* \.php.$ { # Proxy all requests with an URI ending with .php* # (includes PHP, PHP3, PHP4, PHP5...) include /etc/nginx/fastcgi.conf; } # all other files location / { root /var/www/somedomain.com; try_files $uri $uri/ ; } error_page 404 /errors/404.html; location /errors/ { alias /var/www/errors/; } #this loads custom logging configuration which disables favicon error logging include /etc/nginx/drop.conf; } this domain is a simple STATIC HTML site just for some testing purposes. I'd expect that the error_page directive would kick in in response to PHP-FPM not being able to find given files as I have fastcgi_intercept_errors on; in http block and nave error_page set up, but I'm guessing the request fails even before that somewhere on internal redirects. Any help would be much appreciated.

  Read the article

• Nice level not working on linux

  - by xioxox

  I have some highly floating point intensive processes doing very little I/O. One is called "xspec", which calculates a numerical model and returns a floating point result back to a master process every second (via stdout). It is niced at the 19 level. I have another simple process "cpufloattest" which just does numerical computations in a tight loop. It is not niced. I have a 4-core i7 system with hyperthreading disabled. I have started 4 of each type of process. Why is the Linux scheduler (Linux 3.4.2) not properly limiting the CPU time taken up by the niced processes? Cpu(s): 56.2%us, 1.0%sy, 41.8%ni, 0.0%id, 0.0%wa, 0.9%hi, 0.1%si, 0.0%st Mem: 12297620k total, 12147472k used, 150148k free, 831564k buffers Swap: 2104508k total, 71172k used, 2033336k free, 4753956k cached PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND 32399 jss 20 0 44728 32m 772 R 62.7 0.3 4:17.93 cpufloattest 32400 jss 20 0 44728 32m 744 R 53.1 0.3 4:14.17 cpufloattest 32402 jss 20 0 44728 32m 744 R 51.1 0.3 4:14.09 cpufloattest 32398 jss 20 0 44728 32m 744 R 48.8 0.3 4:15.44 cpufloattest 3989 jss 39 19 1725m 690m 7744 R 44.1 5.8 1459:59 xspec 3981 jss 39 19 1725m 689m 7744 R 42.1 5.7 1459:34 xspec 3985 jss 39 19 1725m 689m 7744 R 42.1 5.7 1460:51 xspec 3993 jss 39 19 1725m 691m 7744 R 38.8 5.8 1458:24 xspec The scheduler does what I expect if I start 8 of the cpufloattest processes, with 4 of them niced (i.e. 4 with most of the CPU, and 4 with very little)

  Read the article

• Apache 403 Forbidden Error when accessing local web server using local IP address

  - by amjo324

  I have an odd problem when attempting to browse to pages stored on a local web server (Apache 2.2). The pages are served as expected when I browse to localhost or 127.0.0.1 on port 80. Yet when I attempt to browse to the same pages by referencing the local IP address (192.168.x.x), I receive a HTTP 403 (Forbidden) error. In essence, http://localhost:80 works but 192.168.x.x:80 doesn't even though I'm specifying the IP of the local machine. You may be thinking "who cares? just use localhost". However, this is the first step in troubleshooting why I cannot remotely access these pages from different hosts on my LAN. I'm presuming this can't be a firewall issue as I'm only connecting to the local machine. Even so, I verified there was no iptables rules that could be having an effect. I've checked the Apache error logs and the corresponding line of relevance is: [Sat Oct 19 07:38:35 2013] [error] [client 192.168.x.x] client denied by server configuration: /var/www/ I've inspected most of the apache config files and they don't appear to differ from what you would expect with a default install. I can't see anything in apache2.conf that would be a problem and httpd.conf is an empty file. This is an excerpt from /etc/apache2/sites-enabled/000-default: <VirtualHost *:80> ServerAdmin webmaster@localhost DocumentRoot /var/www <Directory /> Options FollowSymLinks AllowOverride None </Directory> <Directory /var/www/> Options Indexes FollowSymLinks MultiViews AllowOverride All Order allow,deny allow from all </Directory> Any insight as to where I can look next to find a solution ? Thanks in advance.

  Read the article

• Best practices for settings for Oracle database creation

  - by Gary

  When installing an Oracle Database, what non-default settings would you normally apply (or consider applying) ? I'm not after hardware dependent setting (eg memory allocation) or file locations, but more general items. Similarly anything that is a particular requirement for a specific application rather than generally applicable isn't really useful. Do you separate out code/API schemas (PL/SQL owners) from data schemes (table owners) ? Do you use default or non-default roles, and if the latter, do you password protect the role ? I'm also interested in whether there's any places where you do a REVOKE of a GRANT that is installed by default. That may be version dependent as 11g seems more locked down for its default install. These are ones I used in a recent setup. I'd like to know whether I missed anything or where you disagree (and why). Database Parameters Auditing (AUDIT_TRAIL to DB and AUDIT_SYS_OPERATIONS to YES) DB_BLOCK_CHECKSUM and DB_BLOCK_CHECKING (both to FULL) GLOBAL_NAMES to true OPEN_LINKS to 0 (did not expect them to be used in this environment) Character set - AL32UTF8 Profiles I created an amended password verify function that used the apex dictionary table (FLOWS_030000.wwv_flow_dictionary$) as an extra check to prevent simple passwords. Developer logins CREATE PROFILE profile_dev LIMIT FAILED_LOGIN_ATTEMPTS 8 PASSWORD_LIFE_TIME 32 PASSWORD_REUSE_TIME 366 PASSWORD_REUSE_MAX 12 PASSWORD_LOCK_TIME 6 PASSWORD_GRACE_TIME 8 PASSWORD_VERIFY_FUNCTION verify_function_11g SESSIONS_PER_USER unlimited CPU_PER_SESSION unlimited CPU_PER_CALL unlimited PRIVATE_SGA unlimited CONNECT_TIME 1080 IDLE_TIME 180 LOGICAL_READS_PER_SESSION unlimited LOGICAL_READS_PER_CALL unlimited; Application login CREATE PROFILE profile_app LIMIT FAILED_LOGIN_ATTEMPTS 3 PASSWORD_LIFE_TIME 999 PASSWORD_REUSE_TIME 999 PASSWORD_REUSE_MAX 1 PASSWORD_LOCK_TIME 999 PASSWORD_GRACE_TIME 999 PASSWORD_VERIFY_FUNCTION verify_function_11g SESSIONS_PER_USER unlimited CPU_PER_SESSION unlimited CPU_PER_CALL unlimited PRIVATE_SGA unlimited CONNECT_TIME unlimited IDLE_TIME unlimited LOGICAL_READS_PER_SESSION unlimited LOGICAL_READS_PER_CALL unlimited; Privileges for a standard schema owner account CREATE CLUSTER CREATE TYPE CREATE TABLE CREATE VIEW CREATE PROCEDURE CREATE JOB CREATE MATERIALIZED VIEW CREATE SEQUENCE CREATE SYNONYM CREATE TRIGGER

  Read the article

• Web hosting for multiple web sites providing system isolation

  - by Justin

  We have a small number of projects where we expect the client will not be maintaining the installed versions of applications we install to power the site (such as Drupal). Given that an important part of security is keeping things updated, we don't want to host these projects on our Plesk-powered dedicated servers that currently host lots of our other client's websites. Our goal is to find a host where we can deploy isolated instances (be these slices, virtual servers, grid servers, etc) for each individual (or groups of 2-3) web sites as we need them. These instances would be completely separate, so that if one web site were hacked it would not impact any other site. Typical hosting requirements: Linux Apache PHP 5 MySQL Supports Drupal Ability to setup a cron task (but we don't need SSH access) Daily backups Virtualized/cloud hosting (we want to avoid shared) Pricing per site is around $25/month OS is patched automatically Some options we have considered but won't work: MediaTemple: Two major data center-wide security incidents and recent downtime foster doubt about this host's technical ability. Slicehost: This would require us to manage the entire server, which we don't want to do. Rackspace Cloud Sites (formerly Mosso): No backup options. Do you have any recommended hosting options for given these requirements?

  Read the article

• IIS 404 custom error

  - by Greg B

  I've deployed an ASP.NET 3.5 app to a 64bit Windows 2003 R2 server. In the web.config I have the following <customErrors mode="RemoteOnly" defaultRedirect="/404/"> <error statusCode="404" redirect="/404/"/> <error statusCode="500" redirect="/500/"/> </customErrors> In the website properties in IIS Manager I have set the 404 and 500 errors to Type = "URL" and the same URLs as in the web.config. I have a wildcard application map to the .NET 2.0 aspnet_isapi.dll with "Verify file exists" turned off. If I try to hit a fake .aspx file I successfully get sent to the 404 page. I belive this is because there is an explicit mapping for .aspx to the .NET DLL. If I try to access a fake directory I simply recieve a plain text response saying: The system cannot find the file specified. It would appear that these requests for directories are not being routed through the .NET pipeline, which is what I would expect (and need) to happen becuase of the wildcard application mapping. Any ideas?

  Read the article

• tail -f and then exit on matching string

  - by Patrick

  I am trying to configure a startup script which will startup tomcat, monitor the catalina.out for the string "Server startup", and then run another process. I have been trying various combinations of tail -f with grep and awk, but haven't got anything working yet. The main issue I am having seems to be with forcing the tail to die after grep or awk have matched the string. I have simplified to the following test case. test.sh is listed below: #!/bin/sh rm -f child.out ./child.sh > child.out & tail -f child.out | grep -q B child.sh is listed below: #!/bin/sh echo A sleep 20 echo B echo C sleep 40 echo D The behavior I am seeing is that grep exits after 20 seconds , however the tail will take a further 40 seconds to die. I understand why this is happening - tail will only notice that the pipe is gone when it writes to it which only happens when data gets appended to the file. This is compounded by the fact that tail is to be buffering the data and outputting the B and C characters as a single write (I confirmed this by strace). I have attempted to fix that with solutions I found elsewhere, such as using unbuffer command, but that didn't help. Anybody got any ideas for how to get this working how I expect it? Or ideas for waiting for successful Tomcat start (thinking about waiting for a TCP port to know it has started, but suspect that will become more complex that what I am trying to do now). I have managed to get it working with awk doing a "killall tail" on match, but I am not happy with that solution. Note I am trying to get this to work on RHEL4.

  Read the article

• locked files on HFS+ home partition shared between OSX/Linux

  - by HazyBlueDot

  I dual boot into Arch Linux and OS X 10.6 on my MacBook pro. I synced my UID between both OSes and created an HFS partition (with no journaling) to use as a shared home/Users partition. For the most part it works just as I'd expect, but sometimes when I'm booted into OS X certain files are "locked" (when I get info on a particular file the "Locked" box is checked under the "General" pane. I can resolve the issue by manually unchecking the box) and/or I get "Operation not permitted" when I try deleting or chmod'ing a file. In both cases I don't see anything out of the ordinary on the permission bits displayed with ls -l, except for a trailing '@' character in the position where the sticky bit would normally occur: -rw-r--r--@ 1 myuser mygroup 296 Mar 29 11:44 myfile This '@' character shows up on ALL normal files, so doesn't seem to be linked to the locked/operation not permission situation. On the Linux side of things I never have permission problems. To the best of my limited knowledge and experience with ACLs I've not found any ACLs on any of the files in question. For what it's worth, I do most of my file editing using emacs (Aquamacs in OSX), is it possible it is setting weird permission bits? What is the "locked" setting that OS X uses and does it have a permission bit equivalent (so at the very least I could recursively unlock all files in my home directory from the terminal) why might some, but not other files get "locked" when booting into OS X what is the meaning of the '@' character?

  Read the article

• No digital audio output with Asus Xonar DG

  - by Lunatik

  I've purchased an Asus Xonar DG as replacement for faulty onboard audio in a Medion 8822 as it has an optical output which is all I really need to feed my HTPC. I uninstalled the previous drivers/devices, switched the PC off, inserted the Asus card, powered up, disabled the onboard audio in the BIOS, then installed the driver that came on the CD (same version as on Asus' website as of today) and everything went perfectly - no errors. I set the audio devices up in Windows and in the Asus utility (SPDIF enabled, 6-ch audio) as I would expect to see them work, but the only thing is I have no digital audio from test tones within Windows/the Asus utility, PCM audio or Dolby Digital from DVD. Analogue audio is fine. I've uninstalled things and reinstalled a couple of times now, as well as trying almost all combinations of analogue/digital outputs but can't get it sorted. Does anyone have any tips on how to get this working? This card has just been released so there isn't much out there to go on. Notes: The light on the toslink port is lit. OS is Vista 32-bit SP2 and all up to date, pretty much a fresh install with almost no 3rd party applications installed This page seems to suggest that a digital output device in Windows is not needed with Xonar cards as it was with the previous Realtek so I have it set to Analog. The only other output device is S/PDIF pass-thru

  Read the article

• Bounce backs from web-generated e-mails are missing

  - by JerSchneid

  We use Google Apps to host my company's mail. On our website, we send some e-mails on behalf of our users. In those e-mails we include lines like this: Return-Path: <[email protected]> Sender: <[email protected]> Sending the messages works great (passes SPF tests), but in the case that the message is sent TO an invalid e-mail address, we expect to get a bounce back message sent to "[email protected]". That message never arrives. (If we send an e-mail manually from within the gmail interface to the same bad e-mail, the message does arrive). We used to receive the bounce back messages as expected, but it seems like they are always quietly blocked now (not in spam or anything). Is there a new policy that blocks bounce backs when the "From" does not match the "Return-Path" or something? We would really like to get these bounce-backs to verify the delivery of the messages. Is there any way to prevent them from being blocked?! Thank you!

  Read the article

• postfix concurrency limit with round robin dns

  - by goose

  Take the following internal round robin dns setup mymta.com. IN A 172.31.1.1 mymta.com. IN A 172.31.1.2 mymta.com. IN A 172.31.1.3 mymta.com. IN A 172.31.1.4 mymta.com. IN A 172.31.1.5 mymta.com. IN A 172.31.1.6 mymta.com. IN A 172.31.1.7 mymta.com. IN A 172.31.1.8 mymta.com. IN A 172.31.1.9 mymta.com. IN A 172.31.1.10 Now assume the following postfix setup (assume these are the only tweaks from defaults in debian package) main.cf: smtp_connection_cache_destinations = mymta.com smtp_connection_cache_reuse_limit = 750 smtp_destination_concurrency_limit = 75 transport * :[mymta.com] I would expect 75 concurrent connections spread across the 10 A records I've set in DNS. However I'm seeing more than a few hundred connections to mymta.com and I'm wondering if Postfix is "smart" enough to set up 75 concurrent connections for each IP address. Thoughts?

  Read the article

• Raid-5 Performance per spindle scaling

  - by Bill N.

  So I am stuck in a corner, I have a storage project that is limited to 24 spindles, and requires heavy random Write (the corresponding read side is purely sequential). Needs every bit of space on my Drives, ~13TB total in a n-1 raid-5, and has to go fast, over 2GB/s sort of fast. The obvious answer is to use a Stripe/Concat (Raid-0/1), or better yet a raid-10 in place of the raid-5, but that is disallowed for reasons beyond my control. So I am here asking for help in getting a sub optimal configuration to be as good as it can be. The array built on direct attached SAS-2 10K rpm drives, backed by a ARECA 18xx series controller with 4GB of cache. 64k array stripes and an 4K stripe aligned XFS File system, with 24 Allocation groups (to avoid some of the penalty for being raid 5). The heart of my question is this: In the same setup with 6 spindles/AG's I see a near disk limited performance on the write, ~100MB/s per spindle, at 12 spindles I see that drop to ~80MB/s and at 24 ~60MB/s. I would expect that with a distributed parity and matched AG's, the performance should scale with the # of spindles, or be worse at small spindle counts, but this array is doing the opposite. What am I missing ? Should Raid-5 performance scale with # of spindles ? Many thanks for your answers and any ideas, input, or guidance. --Bill Edit: Improving RAID performance The other relevant thread I was able to find, discusses some of the same issues in the answers, though it still leaves me with out an answer on the performance scaling.

  Read the article

< Previous Page | 116 117 118 119 120 121 122 123 124 125 126 127  | Next Page >