Search Results

Search found 10358 results on 415 pages for 'apache camel'.

Page 121/415 | < Previous Page | 117 118 119 120 121 122 123 124 125 126 127 128  | Next Page >

• Windows, Apache and MSSQL Authentication

  - by user1114330

  I have a create database script written in perl. I remember it working just fine another machine. A couple years later using a Vista machine I am trying to use it again and it keeps failing. The main difference is that now I am using Apache instead of IIS. In the script the IUSR account is granted permissions as it needs to write to the database as a part of another program. IIS has been uninstalled on this machine but the IUSR account still exists. The NT AUTHORITY\IUSR is also seen in the logins drop down in MSSQL(2012). The machine is running Vista Home Edition. However when running the script I get errors that say that NT AUTHORITY\IUSR cannot be found. I tried also with COMPUTERNAME\IUSR just for the heck of it and of course it was not found. I also tried with IUSR alone and for some reason the user isn't being "found"? Any ideas?

  Read the article

• Apache Bench length failures

  - by Laurens

  I am running Apache Bench against a Ruby on Rails XML-RPC web service that is running on Passenger via mod_passenger. All is fine when I run 1000 requests without concurrency. Bench indicates that all requests successfully complete with no failures. When I run Bench again with a concurrency level of 2, however, requests start to fail due to content length. I am seeing failures rates of 70-80% when using concurrency. This should not happen. The requests I am sending to the web service should always results in the same response. I have used cURL to verify that this is in fact the case. My Rails log is not showing any errors as well so I am curious to see what content Bench actually received and interpreted as a failure. Is there any way to print these failures?

  Read the article

• Dynamic authentication realms in Apache

  - by Cogsy

  I have a front end server acting as a gateway proxy for many (a dynamic 'many') building monitors with embedded webservers. They are accessed with a URL like: http://www.example.com/monitor1/ http://www.example.com/monitor2/ ... I'm trying to restrict access to these monitors to only the users that own them. So what I need is a way of specifying rights to users or groups for specific directories. The standard auth mechanisms I see in Apache won't work because I need to specify every location. I'd prefer some dynamic map or script. Any suggestions?

  Read the article

• "private" directory not accessible in Apache

  - by janeden

  The directory private lives under my DocumentRoot, and despite its name, it should be accessible just like any other dir. But if I add the following RewriteRule to httpd.conf: RewriteRule ^/([^\.]+)$ /$1.html [L] Apache returns 403 for http://server/private/2201. The error log states client denied by server configuration: /private/2201.html If I then rename private to foo, or if I request 2201.html directly, the file is served: 127.0.0.1 - - [21/Nov/2011:10:24:45 +0100] "GET /private/2201 HTTP/1.1" 403 214 127.0.0.1 - - [21/Nov/2011:10:24:58 +0100] "GET /foo/2201 HTTP/1.1" 200 3068 127.0.0.1 - - [21/Nov/2011:10:27:39 +0100] "GET /private/2201.html HTTP/1.1" 200 3068 This is confusing. Is there any special rule for directories named private? If so – why does the direct request for 2201.html work (although the denied request seems to handle the same resource, at least according to the error log entry)?

  Read the article

• Centos 6.2, Apache 2 and Listen port for socket connection

  - by salvosav

  I'm trying to make a socket connection between a client and my server through a php script. To do this, I opened a port on iptables, and configure a virtual host with apache to redirect all traffic from my door to the folder that contains the file index.php, which is my script. Doing some tests the door is open, but using command netstat -ltn , I see ':::35100'. Looking on the net I understand if in this way is only listen inward and not outward. But I don't understand how can I turn this ':::35100 '-' in this '0.0.0.0:35100 '. Or, better yet, how to add this rule. Any ideas? thanks

  Read the article

• Apache routing vhosts to /var/www

  - by FHannes

  One user at my site has reported that he reaches the content at /var/www when browsing to any of the vhosts at my server. As far as I’m aware, my Apache server does not contain a document root that references this folder. On top of that, this user seems to be the only one experiencing the issue. According to his ISP, the issue isn’t caused by them, yet, on his mobile connection, he can access the site. When browsing to my server’s IP, he also receives the correct content from the default vhost. What could be the possible causes of this issue and how can I get it to stop? I’ve explored pretty much every option I could think of.

  Read the article

• ASP.NET app on Apache Mono Ubuntu compiler error as log4net is unable to be found

  - by Jingo

  I'm trying to get a vulnerable practice ASP.NET web application (WebGoat.NET) installed on Apache Mono on Ubuntu. I've followed this guide and it all went smoothly; however, whenever I try to run the app I get this error: The type or namespace name `log4net' could not be found. Are you missing a using directive or an assembly reference? Log4net.dll is in the lib folder of the application directory. It's also in the /usr/lib/mono/gac directory. I'm not sure where else it needs to be. Any suggestions? Thanks!

  Read the article

• Dynamic Virtual Hosts In Apache with www and non-www subdomains

  - by haukish

  I don't know apache very well and I've got a problem with configure mod_vhost_alias This is my httpd.conf file: UseCanonicalName Off LogFormat "%V %h %l %u %t \"%r\" %s %b" vcommon <Directory /var/www/sites/> Options FollowSymLinks AllowOverride All </Directory> <VirtualHost *:80> CustomLog logs/access_log.sites vcommon ServerAlias *.domain.com UseCanonicalName Off VirtualDocumentRoot /var/www/sites/%1/ </VirtualHost> Subdomains work fine without www. but I need to make them work with www too. Here's an example: something.domain.com - site is loading www.something.domain.com - Not Found What should I do?

  Read the article

• Setting correct Content-Type sent from Wordpress, on Apache server

  - by eoinoc

  I need help pointing me in the right direction for setting the ContentType returned by Apache for content produced by WordPress. I'm having trouble figuring out why WordPress is returning incorrect headers. Issue The specific problem is that our Wordpress blog pages are being downloaded as a file rather than displayed by Internet Explorer and Chrome v21. Content-Type: application/x-gzip is being returned by the server. I'm told that I should expect Content-Type: text/html. Background The URL is http://www.bitesizeirishgaelic.com/blog/.

  Read the article

• Uninstall file from Apache Tomcat Web Server

  - by sttaq

  I have a website deployed on an apache web server. I am using a windows installer to deploy and un-deploy this website from the server. During the uninstall I am just removing the .war from the webapp directory of the tomcat. Now when I do this the tomcat automatically removes all the folders created when it unpacked the war file. But it takes some time to remove those folders. I want to know if there is a way to force tomcat to remove the folder immediately by communicating to it with some external tool eg a script, xml-rpc etc?

  Read the article

• Apache timeouts and error log

  - by BlackFire27

  I have an error whenever I run my code for a certain time. I use a lot of loops and sql connections. I basically, put and take out links from my database. The problem is that there is some error thrown that I cant see, whenever I execute a long sql operation .. Note that the fault isnt the code. The code runs well, whenever there are a few links involved. But when there are over 200 links.. an error is thrown that I cants see. I tried to trace the error in a few places: C:\Program Files\Zend\ZendServer\logs\php_error.log C:\Program Files\Zend\phpMyAdmin\config.inc.php Edit Viewer in win xp I am running XP: Windows xp php version: 5.3.9-ZS5.6.0. Apache/2.2.21 Apacher version: (Win32) mod_ssl/2.2.21 OpenSSL/0.9.8o I cant trace the error at all, and why it happens. All I can suspect of, is that there is a server timeout..

  Read the article

• php apache unknow 500 error

  - by JohnathanKong

  I currently have an error with my apache/php installation on a centos system. I checked the log files in /var/log/httpd and in my logs directory as specified in my virtual host file, but they are not getting populated with errors. I've also set php to log errors, through the php.ini, to the /var/log/httpd/ but the error file is not getting created. When I setup the display_errors = On in the php.ini all I get is a blank screen. this is a git controlled project that is running off of an ubuntu server that works perfectly, so there is something missing from this server. My question is, is there any way I can get more info on the error that I am getting? I just need something that I can trace back. I am using a codeigniter framework, so for me to trace through the code will take days. Thanks!

  Read the article

• WAMP: Apache refusing connections outside the network

  - by JoeWolf

  I have wamp installed. I ran the server, everything is running fine from localhost and my local ip address. I forwarded port 80 on my router. Whenever I try to access the server from the outside, using my real ip, it doesn't work and timeouts. I though port forwarding is not working, forwarded another port for different service and it went through, so the problem is with apache. I checked the error log, didn't find any errors. Skype is off. Any tips what could be causing this? Thanks!

  Read the article

• How to make your apache application accessible within network

  - by guest

  I have a Windows XP machine where I have installed WAMP and made a PHP based web application. I can access the web application from within this machine by using the browser and pointing to: http://localhost/myApp/ --- and the page loads fine. Now I want this site (http://localhost/myApp) to be accessible to all machines within the network (and may be later, to the general public as well). I am quite new to this, how do I make my site accessible to all machines within the network and to the general public in the internet? I tried modifying the httpd.conf file in Apache (WAMP) by changing Listen 80 to Listen 10.10.10.10:80 (where I replaced 10.10.10.10 with the actual IP of this windows xp machine). I also tried "Put Online" feature in WAMP. None seem to work though. How do I make it accessible?

  Read the article

• IfModule itk.c ignored even if I'm running Apache itk

  - by djechelon

  I'm running itk as Apache MPM. In order to prevent error in case I need to change the MPM in the future, I set <IfModule itk.c> AssignUserID user group </IfModule> but I found that it gets ignored. In fact, if I add a WTF like and run rcapache2 configtest it returns me Syntax OK <IfModule itk.c> AssignUserID user group WTF ##doesn't throw error </IfModule> By the way, /etc/sysconfig/apache2 shows APACHE_MPM="itk" How do I check if I'm running itk or not?

  Read the article

• Where i can get Binary for Apache http server 2.2.15 for solaris

  - by user201966

  I need to install apache http server 2.2.15 in solaris 9 .But in apache site ,only source is available for solaris. Please help me to find binary distribution for solaris 9? If i have to compile the source to binary for solaris,tell me how to compile the source for solaris 9?

  Read the article

• Apache: multiple domains handling

  - by cache

  So I use following schema to handle multiple sites on my apache: <VirtualHost 192.168.1.100:80> # get the server name from the Host: header UseCanonicalName Off VirtualDocumentRoot /var/www/%0/docs VirtualScriptAlias /var/www/%0/cgi-bin </VirtualHost> Therefore, if a client go to www.example.com, it will actually point to /var/www/www.example.com/doc/, which is good. However, what if the client go to example.com? It will point to /var/www/example.com/doc, which is not what we want. So my question is: is there any better schema for that? Or what should I do to fix the issue? Thanks!

  Read the article

• Apache 2.4 subdomain setup fails

  - by Grashopper

  I am struggling with this all the day, no answer i found here as well. Please advice how to setup proper a subdomain i need. My Apache config has 2 domains configured (on same IP), for the domain2.com i need to setup a sub-domain. Here is what i have so far, but the subdomain keeps redirecting me to domain2.com (main site). <VirtualHost 11.11.11.11:80> ServerName domain1.com ServerAlias domain1.com *.domain1.com DocumentRoot "C:/wwwmap/domain1.com" </VirtualHost> <VirtualHost 11.11.11.11:80> ServerName domain2.com ServerAlias domain2.com *.domain2.com DocumentRoot "C:/wwwmap/domain2.com" </VirtualHost> <VirtualHost 46.4.24.4:80> ServerName projects.domain2.com DocumentRoot "C:/wwwmap/projects" </VirtualHost> The DNS entry is: projects in CNAME domain2.com Trying to remove ServerAlias domain2.com *.domain2.com worked so far, but then domain2.com is redirecting to domain1.com What am i doing wrong?

  Read the article

• Apache server, PHP

  - by user65649

  I am running a php site on my apache server (Mac). I am having trouble displaying images on the site when I access it externally or from another computer on the same server. If I try to access the image directly. website.com/image.jpg I get a broken link icon and can't display the image. Any ideas what could cause this? My images are embedded using a style.css file. background-image:url(image.jpg);

  Read the article

• mod_perl loses STDOUT in middle of request

  - by puzzled72

  Hi, I have been having this weird issue where mod_perl seems to lose STDOUT in the middle of the request. So far I have eliminated everything I could think of. You might have seen this bug related to the following errors in error_log : Apache2 IO flush: (103) Apache2::RequestIO::read: (104) Software caused connection abort They are all the same error. It happens when the perl script running under mod_perl loses STDOUT when trying to print the result back to apache. I only notice this error on my servers running the following: (centos5.4) Perl 5.8.8-27 mod_perl 2.0.4-6 httpd 2.2.3-31 kernel-2.6.18-164.15.1 It's not the code This code has been working for months It's not network related The browser gets the error response from apache. It's not time related I get the error 15 or so seconds after I restart httpd It's not idle httpd related I have tried reducing the min/max SpareServers to 1 It's not load related I get the error even if there are only 10 sessions on httpd It's not related to the "fd < PERLIO_MAX_REFCOUNTABLE_FD" perl 5.8.8 bug I recompiled perl-5.8.8 with the patch mentioned here : https://bugzilla.redhat.com/show_bug.cgi?id=559832, same error. It appeared sometime between December 2009 and February 2010 sorry I cannot be more specific Anyone has any idea ? Anything that I have not tested ? Really Puzzled!

  Read the article

• Subversion gives Error 500 until authenticating with a web browser

  - by Farseeker

  We used to use Collabnet SVN/Apache combo on a Windows server with LDAP authentication, and whilst the performance wasn't brilliant it used to work perfectly. After switching to a fresh Ubuntu 10 install, and setting up an Apache/SVN/LDAP configuration, we have HTTPS access to our repositories, using Active Directory authentication via LDAP. We're now having a very peculiar issue. Whenever a new user accesses a repository, our SVN clients (we have a few depending on the tool, but for arguments sake, let's stick to Tortoise SVN) report "Error 500 - Unknown Response". To get around this, we have to log into the repo using a web browser and navigate 'backwards' until it works E.G: SVN Checkout https://svn.example.local/SVN/MyRepo/MyModule/ - Error 500 (bad) Webbrowse to https://svn.example.local/SVN/MyRepo/MyModule/ - Error 500 (bad) Webbrowse to https://svn.example.local/SVN/MyRepo/ - Error 500 (bad) Webbrowse to https://svn.example.local/SVN/ - Forbidden 403 (correct) Webbrowse to https://svn.example.local/SVN/MyRepo/ - OK 200 (correct) SVN Checkout https://svn.example.local/SVN/MyRepo/MyModule/ - Error 500 (bad) Webbrowse to https://svn.example.local/SVN/MyRepo/MyModule/ - OK 200 (correct) SVN Checkout https://svn.example.local/SVN/MyRepo/MyModule/ - OK 200 (correct) It seems to require authentication up the tree, starting from the svnparentpath up through to the module required. Has anyone seen anything like this before? Any ideas on where to start before I ditch it back to Collabnet's SVN server?

  Read the article

• Apache2 Enabling Includes module causes svn access to quit working

  - by Matthew Talbert

  I have dav_svn installed to provide http access to my svn repos. The url is directly under root, eg mywebsite.com/svn/individual-repo. This setup has been working great for some time. Now, I need SSI (server-side includes) for a project, so I enabled this module with a2enmod include. Now, tortoisesvn can't access the repo; it always returns a 301 permanent redirect. Some playing with it reveals I can access it in a browser if I'm sure to include the trailing / but it still doesn't work in TortoiseSVN. I've looked at all of the faq's for this problem with TortoiseSVN and apache, and none of them seem to apply to my problem. Anyone have any insight into this problem? I'm running Ubuntu 9.10 with Apache 2.2.12. The only change I've made to my configuration is to enable the includes mod. Here's my dav_svn conf: <Location /svn> DAV svn SVNParentPath /home/matthew/svn AuthType Basic AuthName "Subversion repository" AuthUserFile /etc/subversion/passwd Require valid-user </Location> and here's the relevant part of my virtual host conf: <Location /svn> SetHandler None Order allow,deny Allow from all </Location> Edit: OK, I've discovered that the real conflict is between the include module and basic authentication. That is, if I disable the include module, browse to the subversion repo, enter my user/pass for the basic authentication, I can browse it just fine. It even continues to work after I re-enable the include module. However, if I browse with another browser where I'm not already authenticated, then it no longer works.

  Read the article

• XDEBUG/PHP doesn't dump profile even when set up properly?

  - by John D.

  I installed xdebug from source, but also tried my package manager (separately) and they both are loaded correctly (verified by restarting Apache and seeing the xdebug copyright info in phpinfo()) but they do not dump profiling information. Out of the 40 different attempts of configuration it logged once or twice but I lost what I did, I tried with first only loading the module in php.ini with no settings, but it didn't log to /tmp/. I tried many different settings but my current is now: xdebug.profiler_enable = Off xdebug.profiler_enable_trigger = 1 xdebug.profiler_output_dir = "/tmp/" xdebug.profiler_output_name = "profiler.%t" Of course I call my script through 127.0.0.1/test.php?XDEBUG_PROFILE, which is for enable_trigger. Do you know why it would not dump profiler information? nobody (Arch Linux) can write to /tmp/ as it has before, so I'm sure it is not a permissions error. Apache's error_log does not tell me anything about xdebug either, as it has loaded correctly. It just does not "work"! EDIT: I made a subfolder "xdebug_profiles" in /tmp/ and chown'ed it to nobody, and now it works flawlessly. I'm not sure why it couldn't write before, I guess it's just a caveat with nobody on Arch. I answered my own question , not enough points to answer it or comment, so consider this answered.

  Read the article

• process and memory issue on linux server

  - by zapping

  Need some assistance in analyzing apache and php process running on linux server. Its a 8-core intel processor with 4GB ram. When the website on it runs the top displays like this. PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND 23459 username1 16 0 151m 27m 8388 S 11.3 0.7 0:11.71 php5 23730 username1 16 0 151m 28m 8388 S 11.3 0.7 0:03.87 php5 23458 username1 16 0 151m 28m 8388 S 3.0 0.7 0:19.20 php5 16202 mysql 15 0 459m 38m 4624 S 0.7 1.0 62:33.81 mysqld 24141 nobody 15 0 311m 5832 2304 S 0.3 0.1 0:00.03 httpd Why does the command say php5 when the website is accessed. Both apache and php was preconfigured so not sure whats done there. Tried setting up the same site and db on a different server but on it the process shows httpd always and not php5. The site uses mysql db. The problem is server load seems to go till about 5.x when the website was access by about 16users. When the free -m command was given the output shows total used free shared buffers cached Mem: 3941 3727 213 0 236 2734 -/+ buffers/cache: 756 3184 Swap: 4095 0 4095 Lots of memory seems to be in cache and free memory is less. Even when the website is not accessed that is leaving it very much idle for about 2days the free memory showed just 190. When the site is accessed the free memory seems to be go till 90mb then it increases to about 150mb. It always seems to remain just about 200mb. Is it somehow related to the server load showing 5.x. Will adding some more RAM resolve the load issue?

  Read the article

• localhost won't load after adding config data to httpd

  - by OldWest

  I am not very experienced with configuring httpd, and I am following a tutorial to view my site w/ domain name under localhost. My localhost just blanks out and my apache services won't restart. I checked all of my paths and they are correct. I am editing the w*indows/system32/drivers/etc/host*s file and my apache httpd file. This is what I am putting in my hosts file: 127.0.0.1 www.cars_v1.0.com.localhost And in the footer of my httpd file I am putting this: <VirtualHost 127.0.0.1:80> ServerName www.cars_v1.0.com.localhost DocumentRoot "C:\wamp\www\symfony\cars_v1.0\web" DirectoryIndex index.php <Directory "C:\wamp\www\symfony\cars_v1.0\web"> AllowOverride All Allow from All </Directory> Alias /sf C:\wamp\www\symfony\cars_v1.0\lib\vendor\symfony-1.4.8\data\web\sf <Directory "C:\wamp\www\symfony\cars_v1.0\lib\vendor\symfony-1.4.8\data\web\sf"> AllowOverride All Allow from All </Directory> </VirtualHost>

  Read the article

< Previous Page | 117 118 119 120 121 122 123 124 125 126 127 128  | Next Page >