Search Results

Search found 4224 results on 169 pages for 'dual gpu'.

Page 121/169 | < Previous Page | 117 118 119 120 121 122 123 124 125 126 127 128  | Next Page >

  • Hyper-V networking....still not sure which way to go??

    - by CZhale
    We have our Hyper-V server up and running (Windows 2008 ENT SP2) and started to create some of our VMs. The server has 4 total nics. 2 onboard Broadcom 1gb nic cards and a pci dual port Intel Pro cards 1gb. Right now, I have setup 1 broadcom nic to be the hyper-v host nic, and setup the other broadcom nic for the VMs. We are not using the Intel Nics....should we be thinking about teaming?Link Aggregation?? I just want to achieve the best possible setup for the network, but have read many things for and against teaming the nics?? Thoughts?

    Read the article

  • Linear Performance Scalability with HP San Solutions

    - by Berzemus
    Hi all, I need a San Solution with linear scalability in size as well as in performance. From what I know, with a Modular Smart Array solution such as the P2000/MSA-class solutions from HP, even with a dual controller initial node, I can only increase the size of it, as added nodes come controller-less, so overall performance tends to decrease. On the other hand, the P4000 (lefthand) family of solutions has each of it's nodes have it's own controller, and so when a node is added, storage capacity as well as performance increase. Am I right in all that I say, and is the P4000 the only solution, or have I forgotten something ?

    Read the article

  • Make GRUB automatically boot Ubuntu

    - by Matt Robertson
    I am running a dual-boot with Ubuntu (10.10) and Windows 7. Recently I edited my /boot/grub/grub.cfg file to only show one version of Ubuntu (as opposed to several kernel versions) and Windows, simply by commenting out all other menu entries. My question is if I can edit GRUB to just boot a specific entry automatically. I tried removing all other menu entries, but GRUB still showed the menu with only one entry. I've also considered just setting the timeout to either 0 or 1 second, as this would basically achieve the same thing. What is the best way to do this?

    Read the article

  • Laptop screen is cracked, external monitor only mirroring the broken laptop screen

    - by user92415
    I did something stupid. When my Dell Vostro 1000 laptop screen cracked and went all crazy and I couldn't see anything, I attached it to an external monitor and pressed Fn + F5 and it worked. But then I did something in the control panel that made the external screen look similar to the laptop screen. That made the external screen completely unusable too. In the control panel it was the last tab – something with "dual screens" I think. Is there anyway to reverse what did, turn off the laptop screen permanently and turn the external monitor into the primary? Remember that I can't see anything on the laptop screen. It is a complete goner – and because of what I did I can't see anything on the external monitor.

    Read the article

  • WiFi: Connect to a network with hidden SSID in Windows 7

    - by Dor
    I have Windows 7 with the following station: D-Link DWA-160 Xtreme N Dual Band USB Adapter(rev.A2) (driver version 3.5.0.21). I'm trying to connect to a wireless network that has an hidden SSID with the command: Netsh wlan connect name="myNetworkProfile" The profile is configured to connect even if the network is not broadcasting its name (SSID). Despite that, the command fails promptly every time with the message: The network specified by profile "myNetworkProfile" is not available to connect. Nonetheless, when trying to connect manually using the dialog box (see image below), it successfully connects to the network after about 10 or 15 seconds. Also, Please - no need to elaborate about how useless the hidden SSID feature is.

    Read the article

  • Can I upgrade my computer to run SC2 smoothly?

    - by Citizen
    My desktop is: ACPI x86 AMD Athlon x2 Dual Core 3600 1.9ghz 1 gig ram NVIDIA Geforce 7300 I'm running 32 bit windows vista. My budget is ~$250 When I play SC2, its incredibly slow and I have to play with the graphics on the LOWEST settings. What can/should I buy (specifically) to get this to run SC2 smoothly? Are max setting possible? I'm not sure what I can get that will be for sure compatible + will actually do the trick. Or is my computer simply too old?

    Read the article

  • upgrading my computer system for office use

    - by denise ellul
    Presently I have the under-mentioned computer system. What should be changed and upgraded with the following products that I own presently? I am interested in performance issues related to cache memory, bus speed, RAM, CAS latency as well as other considerations. Thanks for your help. Processor (CPU): Intel Celeron Dual Core E3300 2.5 GHz Motherboard: Asus P5QPL-AM G41 Main Memory (RAM): 2 GB Team Elite DDR2 PC8000 Case: Coolermaster RC330 Power Supply Unit: 500W EZ-Cool Standard Storage Device (Hard Drive): 500GB Samsung Video Card: Intel GMA X4500 (On-board) Optical Drive: LG GH22NS50 Sound Card: AC 97 (On – board) Card Reader: Akasa Black TFT Monitor: 19” View Sonic Speakers: Logitech S120 2.0

    Read the article

  • GRUB Error after Deleting Linux Partition

    - by Nironan12
    I was dual-booting with Windows 7 and Windows Vista each taking up half of my hard drive. In Windows 7 I used Easeus Partition Manager to shrink my Windows 7 volume 8GB. On the unallocated space, I installed Linux Mint 8 RC1. After a little bit of playing around with it, I booted in Windows 7, used EPM again and deleted the 8GB Linux partition. I then extended Windows 7 on the 8GB. After restarting my computer, all I get is a black screen and this: GRUB loading. error: no such partition grub rescue> I do not have a Windows 7 disk nor does my computer come with Startup Repair. What do I do?

    Read the article

  • D-Link DWA-125 constantly disconnecting in winXP, but works fine on ubuntu..

    - by sil3nt
    Hey there, I'm dual booting winXp and ubuntu 10.10. I'm using a DWA-125 usb adapter to connect to my home wifi connection and I'm having this odd issue. First off, in ubuntu the adapter works fine and I have no trouble at all, but when I boot back in XP I get a dlink connetion wizard and the connection times out after every 2 minutes. It's odd because I can actually load up web pages and use the internet for 2 minutes, and then it would disconnect and the whole thing would repeat. I did a system restore on xp and this stopped the whole connect-disconnect thing but once I booted into ubuntu and came back to xp it started all over again!(?). Any ideas as to how I would go about fixing this?

    Read the article

  • Will Software RAID And iSCSI Work For A SAN

    - by Justin
    I am looking for a SAN solution, but can't afford even entry level solutions. Basically, the SAN is for development and a proof of concept product. The performance doesn't have to be amazing, but needs to be functional. My buddy says we should just setup sotware RAID and software iSCSI in Linux. Essentially I have a spare server with dual Xeon processors, 4GB of memory, and (2) 500GB 7200RPM drives. It's a bit old but working. I am sure there is reason people don't do software RAID and iSCSI, but will performance be usable? Thinking of configuring the drives in RAID 0 (for performance).

    Read the article

  • Move virtual machine hard disk to a separate physical hard disk for better performance?

    - by joeeoj
    I have a dual-core machine with the host OS and many guest virtual OSs. Although I have 8GB of RAM, I notice a slowdown when I turn some virtual machine on (and it takes only 1GB RAM). I was told that I should move virtual machine hard disk file to a separate (another) physical hard drive in my PC to get better performance. This way the head of the hard disk would not have to jump from the virtual OS to the host OS as each hard drive would have its own head to deal with the OS: hard drive 1 head for host OS and hard drive 2 head for guest OS. Is this true? Should I get another hard disk only for virtual machine hard disk files?

    Read the article

  • Changing the partition icon for Boot Camp

    - by zneak
    Hey guys, I've installed Windows 7 for a dual-boot setup on my new Core i7 MacBook Pro. Now, just for the looks, I'd like to change the volume icon. The partition is in NTFS format. I remember that in the past (with Leopard), you just had to add a .VolumeIcon.icns file at the root of a volume to set its icon. It seems this trick wore off with Snow Leopard. It apparently still works with CDs and DVDs, but hard drives keep that old, boring drive icon, no matter how lovely the .VolumeIcon.icns file I've put at the root. How can I change that?

    Read the article

  • How to use a custom Windows 7 system drive letter?

    - by Ivan
    The subject PC has many hard drive partitions dedicated for different purposes, C: being a Windows XP system drive and F: (which is actually the next primary partition placed right after C: physically) being intended to host a newly installed Windows 7 instance (meant for "dual boot" configuration). Needless to say the intention was all the partitions to have exactly the same letters under both OSes, needless to say Windows 7 has detected all of them in a completely different order which would not be a problem (as the non-system drives letters can be changed easily after installation) if it wouldn't have named it's system drive C: (meant to be F:), which I have no Idea how to change. Is there a way to set the letter you want? I don't mind reinstalling Windows 7 from scratch if it is to be set at installation time or even configured in some text files on the installation DVD. I have tried this way, but it renders the Windows 7 system desktop unbootable (gets stuck on "Preparing your desktop..." after "Welcome").

    Read the article

  • My D-Link's Ethernet bridge downlink just got 10-30x slower?

    - by Jay Levitt
    TL;DR: I unplugged my network to move my desk, and now downloading via my DIR-655's Ethernet LAN bridge is 10-30x slower than the Ethernet switch it's plugged into. Background My network is SMC cable modem <-> Cisco firewall <-> Netgear switch <-> D-Link WiFi† | | | | SMC8014 ASA-5505 GS608v2 gigE DIR-655 rev A3 gigE †The DIR-655 is used as an access point, not a router (although what D-Link calls an access point, I'd call a bridge). The "WAN" port is unused; the Netgear connects to the built-in 4-port Ethernet LAN switch, inside the built- in router/firewall. Endpoints: MacBook Pro 17" mid-2010 iPhone 4S Fedora 12 Linux server running reasonably fast dual-Athlon X2, VelociRaptors, etc. All cables are <10 feet, mostly CAT-5e, some CAT-6, all premade. All WiFi endpoints are within three feet of the D-Link. Yesterday I unplugged and rearranged stuff, and now connecting via the D-Link - even through the wired switch, right next to the incoming network cable - is 30x slower than connecting directly to the Netgear switch, on both my MacBook and iPhone. How I'm measuring "slower" I'm mostly using http://speedtest.net, which of course only really measures broadband speeds. I've also installed http://www.speedtest.net/mini.php on my local server, but can't test the iPhone with that. Results Speedtest.net, closest server over Comcast business-class: CONFIG | PING (ms) | DOWN (Mbps) | UP (Mbps) Mac <-> Ethernet <-> Netgear | 9 | 31.6 | 6.8 Mac <-> Ethernet <-> D-Link | 8 | 4.1 | 6.0 Mac <-> WiFi <-> D-Link | 9 | 1.4 | 2.9 iPhone <-> WiFi <-> D-Link | 67 | 0.4 | 1.6 Speedtest Mini on Linux PC: CONFIG | DOWN (Mbps) | UP (Mbps) Mac <-> Ethernet <-> NetGear | 97.2 | 76.9 Mac <-> Ethernet <-> D-Link | 8.2 | 24.2 Mac <-> WiFi <-> D-Link | 1.0 | 8.6 Slow typing in SSH: Mac <-> Ethernet <-> Netgear <-> Linux PC: smooth Mac <-> Ethernet <-> D-Link <-> Linux PC: choppy Note that D-Link upload speeds are normal on broadband, slower locally (but I'd believe that's a D-Link limitation), and always faster than the downloads! Since ssh is choppy just with slow typing, I don't believe it's a throttling-type problem either; that's not a lot of bandwidth. What I've tried Swapping all "good" and "bad" cables Re-plugging "bad" cable from D-Link to Netgear and watching it be the "good" cable pulling cables away from power lines Verify that the Mac auto-detects the D-Link as gigE Try to verify the link speed of the D-Link <- Netgear connection, but the firmware doesn't report that Verify that the D-Link sees no TX/RX errors or collisions Use different Ethernet ports on both Netgear and D-Link Reset the D-Link to factory settings Upgrade the D-Link firmware from 1.21 to 1.35NA, 2010/11/12, the latest Reboot everything at least once On the Mac, disable Wi-Fi during the Ethernet tests, and unplug Ethernet during the Wi-Fi tests Using iStumbler, verify that the D-Link isn't picking overloaded Wi-Fi channels (usually just 1-5 neighbors on my and adjacent channels, average for my apt building) Verify that the only client connected to the Wi-Fi was the iPhone Verify that nothing was being chatty on my network according to the WISH log Enable and disable all sorts of D-Link settings, including forcing WAN auto-detect to gigE So. I don't mind buying a new access point—I wouldn't mind having a dual-link network—but as a guy who's been networking since gated v4 was a drastic rewrite, and who often used physical sniffers in the days before Wireshark, I'm baffled. I hate being baffled. What could I possibly have changed that would result in this? How can I measure it? All I can think of is a static zap—thick carpet, socks, HVAC—but I didn't feel one, and does that really happen anymore? Can I test if it's Ethernet vs. TCP layer slowness? I'm not familiar with modern network utilities; it's hard to Google without hitting "Q: Why is my network slow? A: Is your microwave on?" If I don't get an answer here, will someone big and powerful help me migrate it to serverfault without getting screamed back here? In the words of Inigo Montoya, "I must know." Don't get all Dread Pirate Roberts on me.

    Read the article

  • How can I judge the suitability of modern processors for systems with specific CPU requirements?

    - by Iszi
    Inspired by this question: How do I calculate clock speed in multi-core processors? The answers in the above question do a fair job of explaining why a lower-speed multi-core processor won't necessarily perform at the same level as a higher-speed single-core processor. Example: 4*2=8, but a quad-core 2 GHz processor isn't necessarily as fast as a single-core 8 GHz processor. However, I'm having a hard time putting the information in those answers to practical use in my mind. Particularly, I want to know how it should be used to judge whether a given CPU is appropriate for an application with specific requirements. Example scenarios: An application has a minimum CPU requirement of 2.4 GHz dual-core. Another application has a minimum CPU requirement of 1.8 GHz single-core. For either of the above scenarios: Would a higher-speed processor with fewer cores, or a lower-speed processor with more cores, be equally sufficient? If so, how can we determine the appropriate processor speeds required for a given number of cores?

    Read the article

  • Watch TV/recorded shows from my Comcast cable box on my Mac?

    - by IVR Avenger
    Hi, all. I've got a MacBook that's about three years old (it's the first generation that had a dual core CPU), running Leopard. I've got a Comcast DVR/HD Cable box. Is there something that I can install in between these devices that will let me watch TV from the Cable box on the Mac's display? The Cable box is in one room, but my tush and the Mac are in the other (fixing code on another machine that can't be part of the equation). Any ideas? Thanks! IVR Avenger

    Read the article

  • Need to hookup HP dv7-3085dx with Nvidia GeForce GT 230M to my Dell 30 inch LCD 3007WFP at max resol

    - by user14660
    I recently bought an HP laptop (dv7-3085dx) (http://reviews.cnet.com/laptops/hp-pavilion-dv7-3085dx/4505-3121_7-33776108.html) which is supposed to have a pretty good video card (NVIDIA GeForce GT 230M). The card is supposed to output a max resolution of 2560x1600 which is also the max resolution of my monitor (http://www.ubergizmo.com/15/archives/2006/02/dell_3007wfp_on_dell_2001fp_action_8_megapixel_desktop.html). Now I bought an HDMI to dual link dvi (http://www.amazon.com/gp/product/B002KKLYDK/ref=oss_product) cable...this is after Best Buy's 70 dollar hdmi to dvi (perhaps it was 'single' link?) didn't give me the best resolution. In windows 7, when I try to set the max resolution for my 30 in monitor, I only get 1280x800...which is absurd. The monitor is great, I love the laptop and the video card supposedly supports such resolutions. So I can't figure out why I'm not getting better resolution (by the way, when i "detect" my monitor in windows 7, it is shown correctly as DELL 3007WFP!).

    Read the article

  • Can't connect Alienware M11x wireless to internet thru families router

    - by Jim Kron
    Morning All, Have an Alienware M11x loaded with Win 7 Premium with the Dell half card wifi. Also have a Netgear and Belkin USB external adapters (b/g and N to include dual radios. No joy either. Families Internet is served thru Charter and they use a Motorola Router. No matter if we reset the router, I cannot connect to the Net but can talk to the router. BTW... my brother only uses WEP as a number of connected items are old and my folks are not in a high threat area for attacks. Frustrated, as I know what I'm doing but this really has me stumped. Any thoughts? Much appreciated, Jim

    Read the article

  • How to install OSX into VirtualBox on a Macbook Air using Apple's Reinstall USB

    - by eug
    I'm currently dual-booting OSX and Ubuntu on my Macbook Air, but it'd be nice to run OSX within Ubuntu via VirtualBox. This seems possible using VirtualBox and is legal - there's even a post on an Oracle blog describing this: http://blogs.oracle.com/karim/entry/installing_mac_os_x_in. Actually, I've read elsewhere that it's only legal with OSX Server, but can't find a reason why it'd be illegal with normal OSX - please let me know if you think otherwise. The problem I have is that a MacBook Air doesn't come with a bootable DVD, but with a "Reinstall Drive" which is a USB stick that comes up as a CDROM drive. It doesn't seem to be ISO9660-formatted though but has an Apple partition table, with OSX installed on an HFS partition. refit says that it has a "boot.efi" as well. I don't know Apple booting/partitioning very well and would really appreciate some advice on how to convert this USB into an ISO or boot it in VirtualBox some other way.

    Read the article

  • Radeon 4670 Card Has 2 DVI Outs But Only Works When One is used in Win7 x64

    - by ssmith
    I have an ATI XFX Radeon 4670 1GB video card in a Windows 7 Ultimate x64 setup. If I only use one monitor, all is well. If I plug in a second DVI cable to the card, both monitors go dark. I can get one or the other to display, but only when it is the only one plugged into the card. I'm really hoping for a dual-monitor setup here as that was the point of the card. I'm using ATI Radeon HD 4600 Series video drivers dated 11/24/09 (8.681.0.0) which are the latest from their site and are supposed to work with Vista or Win7 x64. When the computer boots with both displays connected, both monitors display the inital bios and boot screens. The Win7 splash screen also displays, but by the time it goes to the login screen, one monitor is offline.

    Read the article

  • What would be better in my case - apache, nginx or lighttpd ?

    - by The Devil
    Hey everybody, I'm writing a php site that's expected to get about 200-300 concurrent users browsing it. When initializing the application will load about 30 php classes, some 10 maybe 15 images and a couple of css files. So my question is what else can I do (except optimizing my code and using apc/eaccelerator for php) to get as close as possible to those numbers of concurrent users ? Currently we haven't chosen a server for the site to be hosted on but most probably it'll be a VPS Dual core + 2 or maybe 4gb ram. Is it possible for such a server to handle that load ? Also how could I test it myself and be sure that it'll be able to handle it ? Thanks in advance, Me

    Read the article

  • Location Services are always disabled in Mac OS X Lion

    - by rplusg
    A simple location services program was working fine on my machine and suddenly stopped working. Upon further exploring the problem, I realized that some process has disabled location services in System Preferences » Security & Privacy » Privacy. I checked Enable Location Services, but again it got disabled automatically. After some research I found that it's not just my program, even built-in system functions are also failing because of this problem for example System Preferences » Date & Time » Time Zone failed to get the current location. Every time I check Enable Location Services, I see the following error in the console logs: 16/10/12 11:23:15.636 AM [0x0-0x42042].com.apple.systempreferences: ERROR,Time,372059595.636,Function,"CLInternalSetLocationServicesEnabled",CLInternalSetLocationServicesEnabled failed 16/10/12 11:23:15.638 AM [0x0-0x42042].com.apple.systempreferences: STACK,Time,372059595.636,1 CoreLocation 0x00007fff8f9957be CLInternalSetLocationServicesEnabled + 110 Notes: WiFi is on I didn't install iOS Simulator I use Xcode Version 4.5 (4G182) I use Boot Camp and made my MacBook Pro dual boot (Mac OS X Lion and Windows 7) I do only Mac development but not iOS

    Read the article

  • create replica of ext4 filesystem and re-use it

    - by Jatin
    Is there a way that I can use my Linux ext4 file system, as such and then use it on some other computer. I have a dual-boot of Windows 7 and Ubuntu 10.04 and my partition table looks like this: My question might not be clear, so explaining it with an example. Can I copy my Linux partition on a flash drive and then use it on a different PC, with or without any need to install Ubuntu on new PC, by simply booting from the copied ext4 partition. This way, I can easily port my Ubuntu packages and other applications, settings etc. from one PC to other. If it's a very stupid question, please don't mind.

    Read the article

  • Which Wine DLLs should I *not* overwrite with the real thing?

    - by endolith
    I have a legit installation of Windows XP and dual boot with Ubuntu (currently Karmic). WineHQ says it's possible to use DLLs from a real installation of Windows in place of "DLLs that Wine does not currently implement very well". So I'd like to just create softlinks that point to all of the DLLs in my real Windows System32 folder, under the theory that this would help things function better and behave in a less buggy, more native way. But should I go as far as replacing the Wine DLLs with the real ones? If so, are there any DLLs that need to remain the way they are for compatibility with the Linux world? Which ones are safe to replace?

    Read the article

  • Fedora12 Slow USB 2.0 Write Speed, ehci_hcd module is missing.

    - by MA1
    I am using Fedora 12, the problem i am facing is USB 2.0 write speed. I have a dual boot system with Window XP and Fedora 12. USB 2.0 write speed in Windows XP is much faster then what i am getting in Fedora 12. After some googling i came to know that ehci_hcd module is missing/not present in my system. ehci_hcd module is neither loaded nor it is present in the available list of modules. Can someone guide me how to fix this issue? Is ehci_hcd have something to do with USB 2.0 write speed or? Should i have to recompile the kernel and add/enable he ehci_hcd module?

    Read the article

< Previous Page | 117 118 119 120 121 122 123 124 125 126 127 128  | Next Page >