Search Results

Search found 5122 results on 205 pages for 'max'.

Page 121/205 | < Previous Page | 117 118 119 120 121 122 123 124 125 126 127 128  | Next Page >

• AMD FX CPU drivers/patch

  - by Mubeen Shahid

  I am using Ubuntu since 2009 on notebooks with Intel CPUs. However now, that I am using AMD's FX 6300, I am interested in knowing if there exists anything from Ubuntu (specifically any kernel enhancements/drivers/patches) for AMD's FX "family 15h" Piledrivers. Reason: I would like to have a kernel which uses the hardware to its full capacity, be able to use the latest instruction sets, for max. performance. I did some tests, started with compiling stable 3.9.7 on my 12.04 LTS box, and during compilation I choose processor vendor AMD (unchecked Intel/VIA/etc.), and when I started Ubuntu with this compiled kernel, in the section "System Settings - Additional Drivers" I found that, in addition to graphic card's drivers, there were AMD family 15h drivers also. However, I would prefer something in this regard tested/signed by Ubuntu developers. P.S: 1- the kernel that I have compiled has some issues with Nvidia graphics drivers, so I deleted kernel 3.9.7 and installed signed 3.8.xx from Ubuntu repositories. 2- incase if somebody is planning to advise me to install "AMD64", I am not talking about AMD64 (which is in fact for 64-bit platform).

  Read the article

• Problem connecting to isp server using xl2tpd as client. Ubuntu server 13.04

  - by Deon Pretorius

  I have followed guides found on google and ubuntu support pages and can get xl2tpd connection up but only under the following conditions: 1 - ADSL model must be configured and connected to the ISP or 2 - ADSL modem in bridge mode I must have an existing PPPoe connection established. If neither of the above are active xl2tpd wont trigger pppd and connect to the isp and thus tunnel connection fails to connect to the L2TP server of the ISP. Am I doing something wrong; /etc/ppp/options.l2tpd.axxess ipcp-accept-local ipcp-accept-remote refuse-eap refuse-chap require-pap noccp noauth idle 1800 mtu 1200 mru 1200 defaultroute usepeerdns debug lock connect-delay 5000 name (name used for ppp connection) /etc/ppp/pap-secrets # * password (name used for ppp connection as above) * (ppp password supplied by isp) /etc/xl2tpd/xl2tpd.conf [global] ; Global parameters: auth file = /etc/xl2tpd/l2tp-secrets ; * Where our challenge secrets are access control = yes ; * Refuse connections without IP match debug tunnel = yes [lac axxess] lns = 196.30.121.50 ; * Who is our LNS? redial = yes ; * Redial if disconnected? redial timeout = 5 ; * Wait n seconds between redials max redials = 5 ; * Give up after n consecutive failures hidden bit = yes ; * User hidden AVP's? length bit = yes ; * Use length bit in payload? require pap = yes ; * Require PAP auth. by peer require chap = no ; * Require CHAP auth. by peer refuse chap = yes ; * Refuse CHAP authentication require authentication = yes ; * Require peer to authenticate name = BLA85003@axxess ; * Report this as our hostname ppp debug = yes ; * Turn on PPP debugging pppoptfile = /etc/ppp/options.l2tpd.axxess ; * ppp options file for this lac /etc/xl2tpd/l2tp-secrets # Secrets for authenticating l2tp tunnels # us them secret # * marko blah2 # zeus marko blah # * * interop * vzb_l2tp (*** secret supplied by isp) ^ isp server host name Any help will be greatly appreciated

  Read the article

• Differences when Running with OutputCache managed module under ASP.NET IIS7.x with Cache-control header

  - by Shawn Cicoria

  This post is to report some differences when using MVC or IHttpHandlers if you’re attempting to set the Cache-control : max-age or s-maxage value under IIS7.x using the HttpResponse.Cache methods. [UPDATE]: 2011-3-14 – The missing piece was calling  Response.Cache.SetSlidingExpiration(true) as follows: context.Response.Cache.SetCacheability(HttpCacheability.Public); context.Response.Cache.SetMaxAge(TimeSpan.FromMinutes(5)); context.Response.ContentType = "image/jpeg"; context.Response.Cache.SetSlidingExpiration(true);   Under IIS7.x if you us one of the following 2 methods, you will only get a Cache-ability of “public”.  public ActionResult Image2() { MemoryStream oStream = new MemoryStream(); using (Bitmap obmp = ImageUtil.RenderImage("Respone.Cache.Setxx calls", 5, DateTime.Now)) { obmp.Save(oStream, ImageFormat.Jpeg); oStream.Position = 0; Response.Cache.SetCacheability(HttpCacheability.Public); Response.Cache.SetMaxAge(TimeSpan.FromMinutes(5)); return new FileStreamResult(oStream, "image/jpeg"); } } Method 2 – which is just a plain old HttpHandler and really isn’t MVC3, but under the same MVC ASP.NET application, same result. public class image : IHttpHandler { public void ProcessRequest(HttpContext context) { using (var image = ImageUtil.RenderImage("called from IHttpHandler direct", 5, DateTime.Now)) { context.Response.Cache.SetCacheability(HttpCacheability.Public); context.Response.Cache.SetMaxAge(TimeSpan.FromMinutes(5)); context.Response.ContentType = "image/jpeg"; image.Save(context.Response.OutputStream, ImageFormat.Jpeg); } } } Using the following under MVC3 (I haven’t tried under earlier versions) will work by applying the OutputCacheAttribute to your Action: [OutputCache(Location = OutputCacheLocation.Any, Duration = 300)] public ActionResult Image1() { MemoryStream oStream = new MemoryStream(); using (Bitmap obmp = ImageUtil.RenderImage("called with OutputCacheAttribute", 5, DateTime.Now)) { obmp.Save(oStream, ImageFormat.Jpeg); oStream.Position = 0; return new FileStreamResult(oStream, "image/jpeg"); } } To remove the “OutputCache” module, you use the following in your web.config: <system.webServer> <validation validateIntegratedModeConfiguration="false"/> <modules runAllManagedModulesForAllRequests="true"> <!--<remove name="OutputCache"/>--> </modules>

  Read the article

• Can't Start ISC DHCP IPv6 Server

  - by MrDaniel

  Trying to enable the ISC DHCP server for just IPv6 on Ubuntu 12.04 LTS. I have downloaded and installed the DHCP server via the following command: $ sudo apt-get install isc-dhcp-server Then I have followed the instructions in the following resources, Ubuntu Wiki DHCPv6, SixXS - Configuring ISC DHCPv6 Server and Linux IPv6 HOWTO - Configuration of the ISC DHCP server for IPv6 . So from review all those resources it seems like I need to: set a static IPv6 address for the Interface I want to run the DHCPv6 server from that is part of the IPv6 network subnet outside the DHCP range. Edit the /etc/dhcp/dhcpd6.conf file to configure the DHCPv6 range etc. Create the /var/lib/dhcp/dhcpd6.leases Manually start the DHCPv6 server. Setting the Static IP for eth0 $ sudo ifconfig eth0 inet6 add 2001:db8:0:1::128/64 My dhcpd6.conf default-lease-time 600; max-lease-time 7200; log-facility local7; subnet6 2001:db8:0:1::/64 { #Range for clients range6 2001:db8:0:1::129 2001:db8:0:1::254; } Created the dhcpd6.leases file As indicated in the dhcpd.leases man page. $ touch /var/lib/dhcp/dhcpd6.leases #Tried with sudo as well Manually starting the DHCPv6 server. Attempted to start the server using the following command: $ sudo dhcp -6 -f -cf /etc/dhcp/dhcpd6.conf eth0 The problem, the DHCP will not start, with an append error for the dhcpd6.leases file as indicated below when running the manual start command noted above. Can't open /var/lib/dhcp/dhcpd6.leases for append. Any ideas what I might be missing?

  Read the article

• Making a game with responsive resolution

  - by alexandervrs

  I am making a game, however I wish for it to be resolution agnostic. My target resolution i.e. where things look as intended is 1600 x 900. My ideas are: Make the HUD stay fixed to the sides no matter what resolution, use different size for HUD graphics under a certain resolution and another under a certain large one. Use large HD sprites/backgrounds which are a power of 2, so they scale nicely. Use the player's native resolution. Scale the game area (not the HUD) to fit (resulting zooming in some and cropping the game area sides if necessary for widescreen, no stretch), but always fill the screen. Have a min and max resolution limit for small and very large displays where you will just change the resolution(?) or scale up/down to fit. What I am a bit confused though is what math formula I would use to scale the game area correctly based on the resolution no matter the aspect ratio, fully fit in a square screen and with some clip to the sides for widescreen. Pseudocode would help as well. :)

  Read the article

• Stacks in C++

  - by MarkPearl

  So some more basics… One of the things you will be taught at any college after conquering arrays is different derivatives of collections. Stack is one of the simplest of those and very useful… A stack is a LIFO (last in first out) data structure and has at least two basic method calls – push & pop. Push, “pushes” an item on the top of the stack. Pop, removes the top most item off the stack. Because all elements on a stack are of the same type, one can use an array to implement a stack or a linked list. With the array based approach, the first element in a stack would be the first element in the array, the second on the stack would be the second on the array, etc. One limitation with an array implementation of a stack is that unless the array is dynamic, one would have to have a preset max stack size (based on the bounds of the array). Linked lists is another approach that gets past this boundary by allowing you to dynamically grow or shrink a collection of data. Stacks have many applications… a typical computer science example would be Postfix Expression Calculator, where the LIFO principle is maintained.

  Read the article

• Unity Greeter login screen cuts off login options

  - by ammianus

  I have a pretty newly installed Ubuntu 12.04, using Unity. My external monitor is 1920x1080 max resolution. In the Unity desktop itself everything looks great. I have an NVidia graphics card. When I start my computer and get to the Unity greeter login screen the display is oddly formatted and the resolution seems off. It looks like a zoomed view on the larger 1920x1080 screen. As such it crops the login options off to the left hand side of the screen. So I can only just see the edge of the password box for the user I want to log in with. I can log in with one account by default by blindly typing the password, but I am unable to switch to other accounts. Is there anything I can do to fix the log in screen display so that I can see the normal login options? Note: I first noticed it when I changed my desktop background and the next time I logged in I saw the issue.

  Read the article

• Disk Space Full

  - by Loki

  Setting up Ubuntu 10.04 server, the / disk space shows full under df, however the du does not show any of the space used. This has several mounts to Gluster FS'. I have tried a forced FSCK and to no avail. ~# df -h Filesystem Size Used Avail Use% Mounted on /dev/md0 141G 132G 0 100% / none 3.0G 224K 3.0G 1% /dev none 3.0G 0 3.0G 0% /dev/shm none 3.0G 76K 3.0G 1% /var/run none 3.0G 0 3.0G 0% /var/lock none 3.0G 0 3.0G 0% /lib/init/rw /dev/sdb1 9.0T 7.1T 1.9T 80% /brick1 /dev/sdb2 9.0T 7.9T 1.1T 88% /brick2 localhost:/sanvol09 385T 330T 56T 86% /mnt/sanvol09 <- Gluster FS uses local software to contact the DFS I've attempted a tune2fs and same issue arises # du -h --max-depth=1 --one-file-system / 4.0K /selinux 0 /proc 47M /boot 31M /mnt 8.0K /brick1 8.0K /brick2 391M /lib 4.0K /opt 7.4M /bin 0 /sys 379M /var 5.6M /etc 16K /lost+found 43M /root 4.0K /srv 5.7M /home 4.0K /media 7.0M /sbin 0 /dev 4.0K /tmp 4.0K /cdrom 631M /usr 1.6G / more info # df -ih Filesystem Inodes IUsed IFree IUse% Mounted on /dev/md0 9.0M 91K 8.9M 1% / none 746K 770 745K 1% /dev none 747K 1 747K 1% /dev/shm none 747K 32 747K 1% /var/run none 747K 1 747K 1% /var/lock none 747K 3 747K 1% /lib/init/rw /dev/sdb1 583M 1.8M 581M 1% /brick1 /dev/sdb2 583M 1.9M 581M 1% /brick2 localhost:/sanvol09 25G 76M 25G 1% /mnt/sanvol09 The final question: df show's 100% used, and its not, any other known fixes?

  Read the article

• Verfication vs validation again, does testing belong to verification? If so, which?

  - by user970696

  I have asked before and created a lot of controversy so I tried to collect some data and ask similar question again. E.g. V&V where all testing is only validation: http://www.buzzle.com/editorials/4-5-2005-68117.asp According to ISO 12207, testing is done in validation: •Prepare Test Requirements,Cases and Specifications •Conduct the Tests In verification, it mentiones. The code implements proper event sequence, consistent interfaces, correct data and control flow, completeness, appropriate allocation timing and sizing budgets, and error definition, isolation, and recovery. and The software components and units of each software item have been completely and correctly integrated into the software item Not sure how to verify without testing but it is not there as a technique. From IEEE: Verification: The process of evaluating software to determine whether the products of a given development phase satisfy the conditions imposed at the start of that phase. [IEEE-STD-610]. Validation: The process of evaluating software during or at the end of the development process to determine whether it satisfies specified requirements. [IEEE-STD-610] At the end of development phase? That would mean UAT.. So the question is, what testing (unit, integration, system, uat) will be considered verification or validation? I do not understand why some say dynamic verification is testing, while others that only validation. An example: I am testing an application. System requirements say there are two fields with max. lenght of 64 characters and Save button. Use case say: User will fill in first and last name and save. When checking the fields and Save button presence, I would say its verification. When I follow the use case, its validation. So its both together, done on the system as a whole.

  Read the article

• What technology or skillset should I learn today in order to be able to charge $250+ / hr in 2-3 years? [closed]

  - by Ryan Waggoner

  I've been doing PHP freelance development for the last 4-5 years and I'm starting to max out my hourly rate. So in 2010 I decided to transition to a new language. I played with Python and Ruby, but ended up settling on iOS, for three reasons: I'm enjoying the challenge of working on a completely different type of development, instead of another flavor of web development The demand seems higher right now than for Ruby or Python I see iOS developers charging $150 - 250 / hr Whether these reasons are right or wrong, I've been learning iOS for the last year and I'm starting to get more work in that field. I feel confident that in six months (barring any major shifts in the ecosystem), I can be billing iOS work at $150 / hr or more. However, I'm feeling that I should have done this earlier, that I've missed the boat, and that iOS development is going to dry up or get much more commoditized. Whether this is true or not isn't really my question (though feel free to comment). What I want to know is: what should I start learning right now so that I can be ahead of the curve in a couple years when the demand is far outstripping supply? What technologies or skillsets are going to be so heavily in demand in 2-3 years that you'll be able to charge $250 / hr or more and stay busy? These don't have to be new technologies either...the answer could be iOS or COBOL or whatever.

  Read the article

• Why does 301 redirect work for http but not for https?

  - by Tom G

  Through my domain registrar I have set up a domain, essayme.co.uk, to automatically forward to https://google.com. If I go to http://essayme.co.uk it works as expected and redirects me to https://google.com. $curl -i http://essayme.co.uk HTTP/1.1 301 Moved Permanently Cache-Control: max-age=900 Content-Type: text/html Location: https://google.com Server: Microsoft-IIS/7.5 X-AspNet-Version: 4.0.30319 X-Powered-By: ASP.NET Date: Sat, 07 Jun 2014 11:14:16 GMT Content-Length: 0 Age: 0 Connection: keep-alive However, if I go to https://essayme.co.uk it just freezes and times out. $curl -i https://essayme.co.uk curl: (7) Failed connect to essayme.co.uk:443; Operation timed out What is happening in the second case? (and, if possible, how can I get the redirect to work for https?) Problem background/clarification: I don't have an SSL certificate for the essayme.co.uk domain above, but I do for my live domain (let's call it mywebsite.com), and I was seeing the exact same problem on this domain (hence why I'm trying to debug the problem). Unfortunately I can't experiment with the live domain (as it's live) and I would like to avoid having to buy a second certificate for essayme.co.uk just for debugging (unless absolutely necessary). The problem I was seeing: my live domain, mywebsite.com (not its real name), has a valid SSL certificate. Visiting https://www.mywebsite.com displayed the webpage as expected. I had set up forwarding (like in the question above) from the naked domain (mywebsite.com) to https://www.mywebsite.com) Visiting http://mywebsite.com redirected to https://www.mywebsite.com as expected. However, visiting https://mywebsite.com would freeze and time out (as in the question above). I also tried forwarding it to http://www.otherwebsite.com as an experiment (i.e. forwarding to another site that does not use SSL), but the result was the same: Visiting http://mywebsite.com redirected to http://www.otherwebsite.com as expected. Visiting https://mywebsite.com would freeze and time out again. So I set up essayme.co.uk as an experiment to try and understand why it doesn't work.

  Read the article

• Rendering a big game universe - bitmaps or vector graphics?

  - by user1641923

  I am new to an Android development, though I have much experience with Java, C++, PHP programming and a bit experience with vector graphics too (basic 3d Studio Max, Flash, etc). I am starting to work on an Android game. It is going to be a 2D space shooter/RPG, and I am not going to use any game engines and any 3D party libs. I really want to create a very large game universe, or even pseudo-infinite (without visible borders, as if it were a 2D projection of a sphere). It should include 10-12 clusters of 7-8 planets/other space objects and random amount of single asteroids/comets, which player can interact with and also not interactive background. I am looking for a least complicated aproach to create such a universe. My current ideas are: Simply create bitmaps with space scenery background so that they can be tiled seamlessly repeated and construct my 2D universe of this tiles, then place interactive objects (planets, other spaceships) on it. Using vector graphics. I would have a solid color background, some random background objects and gradients here and there. My problems here: Lack of knowledge of how well vector graphics is integrated in Android. Performance? Memory usage? Does Android manage big bitmaps well? Do all of the bitmaps have to be in memory during all game process? I am interested in technical details regarding each of the ideas and a suggestion, which I should go with.

  Read the article

• Unable to access any ubuntu shares from android/windows clients

  - by dan

  I am running Ubuntu 11.04, and cant seem to access any of my shares. Here is the output from testparm-s : Load smb config files from /etc/samba/smb.conf rlimit_max: increasing rlimit_max (1024) to minimum Windows limit (16384) Processing section "[printers]" Processing section "[CanonMG2100AIO]" Processing section "[FreeAgent Drive]" Loaded services file OK. WARNING: You have some share names that are longer than 12 characters. These may not be accessible to some older clients. (Eg. Windows9x, WindowsMe, and smbclient prior to Samba 3.0.) Server role: ROLE_STANDALONE [global] server string = %h server (Samba, Ubuntu) encrypt passwords = No obey pam restrictions = Yes pam password change = Yes passwd program = /usr/bin/passwd %u passwd chat = Enter\snew\s\spassword:* %n\n Retype\snew\s\spassword:* %n\n password\supdated\ssuccessfully . username map = /etc/samba/smbusers unix password sync = Yes syslog = 0 log file = /var/log/samba/log.%m max log size = 1000 name resolve order = wins lmhosts host bcast dns proxy = No wins support = Yes usershare allow guests = Yes panic action = /usr/share/samba/panic-action %d [printers] comment = All Printers path = /var/spool/samba create mask = 0700 guest ok = Yes printable = Yes browseable = No [CanonMG2100AIO] comment = Printer Drivers path = /var/lib/samba/printers read only = No guest ok = Yes [FreeAgent Drive] path = /media/FreeAgent Drive read only = No guest ok = Yes smbtree: Server requested plaintext password but 'client plaintext auth' is disabled anonymous failed session setup with NT_STATUS_INVALID_PARAMETER Server requested plaintext password but 'client plaintext auth' is disabled anonymous failed session setup with NT_STATUS_INVALID_PARAMETER and hostname: dekstop I know the spelling of desktop is incorrect. it was a duh moment. Any help would be greatly appreciated.

  Read the article

• Java Applet Tower Defence Game needs tweeking

  - by Ephiras

  Hello :) i have made a tower defence Game for my computer science class as one of my major projects, but have encountered some rather fatal roadblocks. here they are creating a menu screen (class Menu) that can set the total number of enimies, the max number of towers, starting money and the map. i tried creating a constructor in my Main class that sets all the values to whatever the Menu class passes in. I want the Menu screen to close after a difficulty has been selected and the main class to begin. Another problem i would really like some help with is instead of having to write entire arrays i would like to create a small segment of code that runs through an entire picture and sets up an array based on that pixels color.this way i can have multiple levels just dragged into a level folder and have the program read through them. users can even create their own. so a 1 if its yellow, a two if blue and a 3 if purple, then everything else = 0; you can download all the classes and code uif you'd like here sorry about having to redirect you but i wasn't sure how to efficently add a code spoiler. help is greatly appreciated

  Read the article

• Database Backup History From MSDB in a pivot table

  - by steveh99999

  I knocked up a nice little query to display backup history for each database in a pivot table format.I wanted to display the most recent full, differential, and transaction log backup for each database. Here's the SQL :-WITH backupCTE AS (SELECT name, recovery_model_desc, d AS 'Last Full Backup', i AS 'Last Differential Backup', l AS 'Last Tlog Backup' FROM ( SELECT db.name, db.recovery_model_desc,type, backup_finish_date FROM master.sys.databases db LEFT OUTER JOIN msdb.dbo.backupset a ON a.database_name = db.name WHERE db.state_desc = 'ONLINE' ) AS Sourcetable   PIVOT (MAX (backup_finish_date) FOR type IN (D,I,L) ) AS MostRecentBackup ) SELECT * FROM backupCTE Gives output such as this :-  With this query, I can then build up some straightforward queries to ensure backups are scheduled and running as expected -For example, the following logic can be used ;-  - WHERE [Last Full Backup] IS NULL) - ie database has never been backed up.. - WHERE [Last Tlog Backup] < DATEDIFF(mm,GETDATE(),-60) AND recovery_model_desc <> 'SIMPLE') - transction log not backed up in last 60 minutes. - WHERE [Last Full Backup] < DATEDIFF(dd,GETDATE(),-1) AND [Last Differential Backup] < [Last Full Backup]) -- no backup in last day.- WHERE [Last Differential Backup] < DATEDIFF(dd,GETDATE(),-1) AND [Last Full Backup] < DATEDIFF(dd,GETDATE(),-8) ) -- no differential backup in last day when last full backup is over 8 days old.   

  Read the article

• Suggestions to start a cross-platform project

  - by Gabriele

  I have a big project in my head, it should be cross-platform (Win, Max and Linux), online (Client - Server) and with 3D graphics. I would like some suggestions to start with the right things. Currently I'm a PHP/MySQL coder, I used to code in C and Pascal on DOS ages (Borland Times ;)), my C knowlegde need a refresh but it's ok. I guess C++ it's the right language. What platform and what i should use to code? I can choose from all three platforms. My idea was to use Visual Studio 2010 C++, but i'm not sure if it support Native code. What kind of libraries should i use? I guessed OpenSSL for the login, OpenGL for graphics part. For the Audio or the GUI? Any other suggestions are well accepted. I know it's a "BIG DEAL" but I have no rush and it'll be a free-time project, only for my pleasure. Thank you in advance.

  Read the article

• Resolution stuck in 640x480 in grub, 11.04 and 12.04

  - by user89797

  I have three operating systems on my machine, Windows 7x64, Ubuntu 11.10 and 12.04 both x64 as well. All three were running at full resolution for my monitor, as well as in the Grub 1.99 boot screen. After booting into Windows, I rebooted my machine and found my Grub resolution was suddenly 640x480. Booting into both versions of Ubuntu, I find myself stuck at that resolution as well. I made no driver changes recently, and hadn't even booted into the 11.10 build in a month or more. I've gone through both proprietary Nvidia driver options for my card (GeForce 9800GT) as well as the open source drivers in 12.04 to no avail. I can't figure out what could have caused this change in both versions of Ubuntu and Grub simultaneously. Windows 7 is unaffected so I think that safely rules out hardware failure. EDIT Ok, so I couldn't boot an graphical live disks, I tried ubuntu 12.04 i386 and x64 as well as 12.10 beta x64 and all of them would flash the initial logo, go to a blank screen with a flashing cursor in the upper left and then my display would die. I managed to boot 12.04 server and get into recovery. I reinstalled grub and went into recovery mode for my 12.04 build. If I boot in safe graphics mode I can get 1280x768, but as soon as I reboot it's broken again. I've tried reinstalling the nvidia drivers and that leaves me with a system stuck at max 640x480. None of these changes have had any impact on the 11.10 build, which is still stuck at 640x480 Given that I can push a somewhat higher resolution in 12.04, and full resolution in windows 7 I'm pretty convinced it's not an issue of my monitor failing. It must be something to do with the graphics drivers. I can't figure out what could be the issue though. I'm especially perplexed that I can't boot any live images

  Read the article

• How to prevent duplication of content on a page with too many filters?

  - by Vikas Gulati

  I have a webpage where a user can search for items based on around 6 filters. Currently I have the page implemented with one filter as the base filter (part of the url that would get indexed) and other filters in the form of hash urls (which won't get indexed). This way the duplication is less. Something like this example.com/filter1value-items#by-filter3-filter3value-filter2-filter2value Now as you may see, only one filter is within the reach of the search engine while the rest are hashed. This way I could have 6 pages. Now the problem is I expect users to use two filters as well at times while searching. As per my analysis using the Google Keyword Analyzer there are a fare bit of users that might use two filters in conjunction while searching. So how should I go about it? Having all the filters as part of the url would simply explode the number of pages and sticking to the current way wouldn't let me target those users. I was thinking of going with at max 2 base filters and rest as part of the hash url. But the only thing stopping me is that it would lead to duplication of content as per Google Webmaster Tool's suggestions on Url Structure.

  Read the article

• NVIDIA Graphics - resolution problems with new 12.04 LTS installation

  - by Daveisuser56810

  I've been trying to install Ubuntu 12.04 LTS on my desktop most of the day. The desktop uses a NVIDIA GEFORCE 9800 (GT I think) graphics card. I am unable to set the correct resolution (1680 x 1050) for the display. The first problem I had was that of the "Black Screen" during install. I overcame this by utilising the "nomodeset" switch on the install options (once I'd found how to do that). The second problem of course was the "Black screen" following the first reboot. Once again this was overcome by using "nomodeset", this time by "editing" the GRUB. This gave me a resolution of 1280x768 which, the Displays GUI allowed me to change to 1280x720 (appears to fit on screen). I then tried to install the NVIDIA drivers. 1) using additional drivers 2) manually by downloading driver and installing in root As soon as NVIDIA drivers are installed - resolution become restricted to 640x480 (max). At this resolution Ubuntu GUI is not usable as most screens are larger than the display. Removing the NVIDIA driver and removing the XORG.CONF file does not lift this restriction. I have tried most things that I have found and that were vaguely intelligible, but nothing appears to get me closer to a resolution of 1680x1050. UPDATE: reinstalled Ubuntu 12-04 and used the "NoModeSet" in the Grub to restore the resolution to 1280x720, which is at least usable. Will live with this for now.

  Read the article

• Why doesn't Firefox cache my images and CSS

  - by Richard A

  I am using IIS7, I have already set up the following. But when I run Firefox it seems not to cache any of my images even with "remember history" set. <?xml version="1.0" encoding="UTF-8"?> <configuration> <system.webServer> <staticContent> <clientCache cacheControlCustom="public" cacheControlMode="UseMaxAge" cacheControlMaxAge="7.00:00:00" /> </staticContent> </system.webServer> </configuration> However when I use Firebug it still points to Firefox not caching images and CSS: public,max-age=604800 Content-Type text/css Content-Encoding gzip Last-Modified Mon, 27 Jun 2011 03:53:22 GMT Accept-Ranges bytes Etag "507968c27d34cc1:0" Vary Accept-Encoding Server Microsoft-IIS/7.5 X-Powered-By ASP.NET Date Mon, 27 Jun 2011 13:06:41 GMT Content-Length 5067 Request Headersview source Host www.xx.com User-Agent Mozilla/5.0 (Windows NT 6.1; rv:2.0.1) Gecko/20100101 Firefox/4.0.1 Accept text/css,*/*;q=0.1 Accept-Language en-us,en;q=0.5 Accept-Encoding gzip, deflate Accept-Charset ISO-8859-1,utf-8;q=0.7,*;q=0.7 Keep-Alive 115 Connection keep-alive Referer http://www.xx.com/ Cookie __utma=62996397.135679654.1309106351.1309159743.1309164158.8; __utmz=62996397.1309106351.1.1.utmcsr=(direct)|utmccn=(direct)|utmcmd=(none); __utmc=62996397

  Read the article

• Security in Robots and Automated Systems

  - by Roger Brinkley

  Alex Dropplinger posted a Freescale blog on Securing Robotics and Automated Systems where she asks the question,“How should we secure robotics and automated systems?”.My first thought on this was duh, make sure your robot is running Java. Java's built-in services for authentication, authorization, encryption/confidentiality, and the like can be leveraged and benefit robotic or autonomous implementations. Leveraging these built-in services and pluggable encryption models of Java makes adding security to an exist bot implementation much easier. But then I thought I should ask an expert on robotics so I fired the question off to Paul Perrone of Perrone Robotics. Paul's build automated vehicles and other forms of embedded devices like auto monitoring of commercial vehicles on highways.He says that most of the works that robots do now are autonomous so it isn't a problem in the short term. But long term projects like collision avoidance technology in automobiles are going to require it.Some of the work he's doing with his Java-based MAX, set of software building blocks containing a wide range of low level and higher level software modules that developers can use to build simple to complex robot and automation applications faster and cheaper, already provide some support for JAUS compliance and because their based on Java, access to standards based security APIs.But, as Paul explained to me, "the bottom line is…it depends on the criticality level of the bot, it's network connectivity, and whether or not a standards compliance is required."

  Read the article

• Making Multilingual J! 1.5 + + Joomfish + VM 1.17 more workable

  - by rhand

  I have been working with a multilingual Joomla! 1.5.23 e-commerce website for a client for quite a while and made several customizations. But the client is still not happy he has to adjust content at at least three locations: Joomfish Virtuemart Article Manager Joomfish is nice in the way that it allows you to create multilingual content and copy and paste the source language on the same page, which makes translation work easier but it is annoying in the way you have to edit several custom fields at different locations/ content types. As Joomla! source language content still needs to be created in the article manager first this is the second location the client has to work at. The third location is Virtuemart. Here all the products and product categories are created. And here we added some custom fields as well. Now I was considering upgrading the website to Joomla 1.7 or later on to 1.8. This J! versions have better multilingual support. But I wonder if er can really make the client's life easier. We will still have to copy the source language to a new article and create content in another language. We will still have the issue of content in custom fields that needs to be translated and we will still have to create content. Should I go for another CMS such as Magento or do you think there is a way in a more recent Joomla! version to work with all content in one or max two locations?

  Read the article

• Why doesn't Firefox cache my images and CSS

  - by Richard A

  I am using IIS7, I have already set up the following. But when I run Firefox it seems not to cache any of my images even with "remember history" set. <?xml version="1.0" encoding="UTF-8"?> <configuration> <system.webServer> <staticContent> <clientCache cacheControlCustom="public" cacheControlMode="UseMaxAge" cacheControlMaxAge="7.00:00:00" /> </staticContent> </system.webServer> </configuration> However when I use Firebug it still points to Firefox not caching images and CSS: public,max-age=604800 Content-Type text/css Content-Encoding gzip Last-Modified Mon, 27 Jun 2011 03:53:22 GMT Accept-Ranges bytes Etag "507968c27d34cc1:0" Vary Accept-Encoding Server Microsoft-IIS/7.5 X-Powered-By ASP.NET Date Mon, 27 Jun 2011 13:06:41 GMT Content-Length 5067 Request Headersview source Host www.xx.com User-Agent Mozilla/5.0 (Windows NT 6.1; rv:2.0.1) Gecko/20100101 Firefox/4.0.1 Accept text/css,*/*;q=0.1 Accept-Language en-us,en;q=0.5 Accept-Encoding gzip, deflate Accept-Charset ISO-8859-1,utf-8;q=0.7,*;q=0.7 Keep-Alive 115 Connection keep-alive Referer http://www.xx.com/ Cookie __utma=62996397.135679654.1309106351.1309159743.1309164158.8; __utmz=62996397.1309106351.1.1.utmcsr=(direct)|utmccn=(direct)|utmcmd=(none); __utmc=62996397

  Read the article

• Smooth waypoint traversing

  - by TheBroodian

  There are a dozen ways I could word this question, but to keep my thoughts in line, I'm phrasing it in line with my problem at hand. So I'm creating a floating platform that I would like to be able to simply travel from one designated point to another, and then return back to the first, and just pass between the two in a straight line. However, just to make it a little more interesting, I want to add a few rules to the platform. I'm coding it to travel multiples of whole tile values of world data. So if the platform is not stationary, then it will travel at least one whole tile width or tile height. Within one tile length, I would like it to accelerate from a stop to a given max speed. Upon reaching one tile length's distance, I would like it to slow to a stop at given tile coordinate and then repeat the process in reverse. The first two parts aren't too difficult, essentially I'm having trouble with the third part. I would like the platform to stop exactly at a tile coordinate, but being as I'm working with acceleration, it would seem easy to simply begin applying acceleration in the opposite direction to a value storing the platform's current speed once it reaches one tile's length of distance (assuming that the tile is traveling more than one tile-length, but to keep things simple, let's just assume it is)- but then the question is what would the correct value be for acceleration to increment from to produce this effect? How would I find that value?

  Read the article

• 12.10 Wireless hotspot configuration and internet browsing - question

  - by Indian

  In our campus we have a leased line connection from a service provider, which has an external IP W.X.Y.Z. This connection is distributed from the server several sub-networks / subnets as follows: Faculty: 172.33....../ 255.255.0.0 Administration: 172.34......./255.255.255.0 Students: 172.35...../255.255.216.0 A student has a laptop with a fixed IP address 172.35.23.123 / 255.255.216.0 where the IP address is on the ethernet port. The gateways for internet access are 172.31.1.1 and 172.31.1.2. Further the student has a wireless port which is inaccessible in the hostel area. The OS of the student is Ubuntu 12.10. The student in the possession of an android phone on which he wishes to install specific software and therefore wishes to activate the internet therein. The student has already attempted the Wireless hotspot solution which works for 12.04 but has not been successful. Various instructions on the internet have helped the student to do the following Installation of dhcp server and hostapd: sudo apt-get install isc-dhcp-server sudo apt-get install hostapd File: /etc/network/interfaces auto lo iface lo inet loopback auto wlan0 iface wlan0 inet static address 10.10.0.1 netmask 255.255.255.0 dns-nameservers 172.31.1.1 172.31.1.2 File: /etc/dhcp/dhcpd.conf subnet 10.10.0.0 netmask 255.255.255.0 { range 10.10.0.2 10.10.0.4; option routers 10.10.0.1; option domain-name-servers 172.31.1.1 172.31.1.2; default-lease-time 6000; max-lease-time 72000; } File: /etc/hostapd/hostapd.conf interface=wlan0 driver=nl80211 ssid=my_hotspot channel=1 hw_mode=g auth_algs=1 wpa=3 wpa_passphrase=1234567890 wpa_key_mgmt=WPA-PSK wpa_pairwise=TKIP CCMP rsn_pairwise=CCMP File: /etc/default/hostapd RUN_DAEMON=”yes” DAEMON_CONF=”/etc/hostapd/hostapd.conf” DAEMON_OPTS=”-dd” File: /etc/default/isc-dhcp-server INTERFACES=”wlan0” File: /etc/rc.local iptables -t nat -A POSTROUTING -s 10.10.0.0/16 -o eth0 -j MASQUERADE exit 0 After all the configuration, the computer is restarted. The student can see that the hotspot named “my_hotspot” is available. The hotspot also awards an address to the android phone. The student will now be able to browse the internet.

  Read the article

< Previous Page | 117 118 119 120 121 122 123 124 125 126 127 128  | Next Page >