Search Results

Search found 7154 results on 287 pages for 'networking'.

Page 121/287 | < Previous Page | 117 118 119 120 121 122 123 124 125 126 127 128  | Next Page >

• 2 x Netgear GS724T (Dual GBIC) trunking issue

  - by Arthor

  I have the following: Netgear GS724T (Firmware Version V1.0.3_35, Protocol Version - 2.001.002) 4 x Indineon ISFP GBR/FC Settings STP Function - Enabled Fast Link - Enabled Trunking port 23,24, (21,22 - RJ45 cables, but not connected.) I have connected both switches via 2 fiber cables and want to use trunking. The problem I am having. Sometimes I get a an issue when none of the switches cannot talk with each other, nor the devices, sometime they can. The problem is irregular and no patten can be determined The statistics shows that when the switches does not work, they have RX errors If I remove one to the GBIC connections, then everything works as normal.] Question Does anyone have a solution for this please? Thanks

  Read the article

• Is there a way to turn off the sound that plays when my computer reconnects to the wireless network?

  - by Dan Tao

  I know this seems silly. Obviously I could mute my computer, or turn the speakers off. But it seems like surely there should be a way that I can keep all of my normal computer sounds without having to hear this one sound (no, it doesn't really bother me; mostly my wife just wants me to turn it off because she finds it annoying). I tried right-clicking on the volume icon in the notification area and went through all of the sounds in the list, thinking I could find the one offending noise and just turn it off. But none of them seem to correspond to the sound that plays when my wireless adapter randomly disconnects and reconnects to the wireless network.

  Read the article

• Router's ssid changes from infrastructure to ad-hoc

  - by waldo

  For a period of time the router's ssid is shown (on various computers) as a normal infrastructure network - computers connect fine and everything works however after a few minutes / hours all computers see the same ssid as an ad-hoc network (not infrastructure). At this point a computer that was already connected continues to work - a computer that isn't cannot connect. Rebooting the router temporarily restores the visibility of the correct infrastructure ssid. Is something interfering? Connecting computers: macbook (2009), iphone 3g, windows vista desktop, windows xp desktop. Details: - D-Link DSL-2740B router set to WPA2-PSK (Personal) - Enable Wireless : Yes - Wireless Network Name (SSID) : ###### - Country : Australia - Wireless Channel : 1 - 802.11 Mode : Mixed 802.11n, 802.11g and 802.11b - Channel Width : Auto 20/40 MHz - Transmission Rate : Best (automatic) - Hide Wireless Network : No - Group Key Update Interval : 0 (seconds)

  Read the article

• ipconfig slow to complete

  - by JonF

  Does anyone have any idea why ipconfig might take a 10-20 seconds to finish? It's causing a timeout issue for me in an application. This is in Windows XP

  Read the article

• Add static route through DHCP

  - by MathieuK

  I'm trying to get an OSX Lion Server to provide a static route to its clients (all OSX Lion) over DHCP. I can't get the client to actually apply the static route. So far, I've managed to get the DHCP server (BOOTPD) to actually serve the DHCP OPTION 33 (static_route) on the DHCP offers by editing /etc/bootpd.plist and adding something like: <key>dhcp_option_33</key> <data>[some base64 goes here]</data> .. and restarting the DHCP service. On the client I've managed to get the client to actually request the dhcp option by modifying and adding option 33 to the DHCPRequestedParameterList key: <key>DHCPRequestedParameterList</key> <array> ... keys snipped for brevity ... <integer>33</integer> </array> .. and rebooting the client. This makes the client request the static_route option from the DHCP server ( i can see the proper output in ipconfig getpacket en0 ) but it doesn't actually apply the rule. Has anyone ever succeeded in applying static_route options on OSX clients through DHCP?

  Read the article

• VPN - Accessing computer outside of network. Only works one way

  - by Dan

  I could use some help here. My ideal goal is to create a VPN for 2 macs that are in different locations so that they can share each others screens and share files. I basically want to do what Logmein's Hamachi does, but without the 5 user limitation. I have set up the VPN on my Synology NAS at my house using the PPTP protocol. I could also use OpenVPN. The good news is that I can use a laptop outside of my home network to access any computer on my network at my house. The bad news is that I can not do the reverse. I want to use a computer in my home network (same network as the VPN server) to access a computer outside of my network (which is connected via VPN successfully). My internal IP is 192.168.1.xxx PPTP VPN assigns my laptop that is outside of my network with 192.168.5.xxx, but when I try to access it remotely either with afp://192.168.5.xxx or vnc://192.168.5.xxx I can't connect using either. Is this something that I should be able to do or is VPN only one way? I've also tried openvpn with the same results. Thanks for any help! -Dan

  Read the article

• Belking Wireless Router unable to connect to internet although wireless connection is working

  - by ptamzz

  I have a Belkin Basic N150 Wireless router. I'm trying to set up wireless connection using the wired ports my university has provided in my hostel room. Usually, when I connect my laptop using a LAN wire through the port, my settings are like IP: 10.5.130.X Subnet Mask: 255.255.254.0 Default Gateway: 10.5.130.250 DNS Server: 10.200.1.11 and I'm able to connect to the internet. Now instead of connecting my laptop directly, I've connected the lan wire to the Belkin Wireless Router, set the router as "Use as an Access Point" and in the IP field, I've put up 10.5.130.1. Now I've set the IP of my system manually to 10.5.130.3. I'm able to connect to the wi-fi but I'm still not able to connect to the internet. What am I missing?

  Read the article

• How to configure 2 LAN Cards

  - by PatDiazJr

  How do we configure two (2) LAN cards on one computer. One LAN card is connected to the internet via the DSL through a router, configured as DHCP. The other LAN card is to be connected via our office's IP/VPN (for email and other office online processes). I know it could be done, but I do not know how. By the way, the operating system is Windows XP.

  Read the article

• Why is my connection slow?

  - by Jay R.

  I have a Dell Precision T5400 with a Broadcom 1Gb onboard NIC. For some strange reason, when I access machines on our local network, the best I can get is around 125KB/s download speed. My laptop that has a 10/100Mb NIC onboard usually gets around 300KB/s or better from the same network resource. Both machines are plugged into the same 1Gb switch which connects to our local network wall jack at 100Mb half duplex. There is also a printer plugged into the same switch at 100Mb full. The resource I'm using for the test is a 30MB zip file copied from a jetty webserver that is running as part of a cruisecontrol installation. The cruisecontrol installation is running WindowsXP with full real-time antivirus and Altiris patch management and inventory running. That stuff on its own is eating some of the download speed. I've seen the laptop reach into the multiple MB/s download speed before, but the desktop never seems to get past 125KB/s to 130KB/s. In WindowsXP, before I upgraded the driver in the desktop, it was that slow. In Fedora, it is still slow even though it appears to be using the same driver version as the upgraded Windows driver. The upgraded Windows driver is faster, but still not nearly as fast as the laptop. What gives? Any insight to improve the situation would be appreciated. Could it be that the BroadCom board just isn't that good, or the driver in linux is just not as good as the Windows one?

  Read the article

• trunk with 3com

  - by majed123

  how can make trunk link in 3com baseline switch 2948 SFP plus

  Read the article

• Step by step USB Wi-Fi driver install for mint 15

  - by Andy

  I'm running Linux mint 15 32 bit on a Dell inspiron 2200. I have given up trying to get the Broadcom BCM4318 built in wireless working, so bought a Dynamode Nano 802.11n wireless USB adapter. It came with an install disc. I have no idea how to install it. Could someone please point me in the right direction for full, idiot proof, step by step instructions. I've been using Ubuntu 12.04 but am totally new to mint 15, so best to assume no previous knowledge. Thanks in advance.

  Read the article

• Encrypting traffic on remote end of SSH tunnel

  - by Aaron

  Using an example of someone connecting to a VPS, an SSH tunnel will encrypt any traffic coming from the user to the VPS. Once it reaches the VPS network, the traffic is not encrypted and is easily sniffable by network administrators on that particular network. (am I understanding all that correctly?) Is there a way to have the traffic encrypted on both ends so that neither side is susceptible to packet sniffing to reveal what kind of data/traffic/protocol is being transmitted?

  Read the article

• Linux route add between static LAN and Wifi Gateway

  - by Hamza

  I have two local machines connected to each other via wired ethernet and one of those machines is also connected to a wifi network which provides internet access. A pseudo-graphical representation of the topology is as follows: (PC2)----------(PC1)---------(Wifi Gateway) 192.168.2.x 10.0.0.x The configuration on PC2 is: iface eth0 inet static address 192.168.2.2 network 192.168.2.0 netmask 255.255.255.0 gateway 192.168.2.1 ...and the configuration on PC1 is: iface eth0 inet static address 192.168.2.1 network 192.168.2.0 netmask 255.255.255.0 gateway 192.168.2.1 On PC1, I've added a default route for wlan0 as I couldn't access the internet otherwise: route add default gw 10.0.0.1 wlan0 And also tried setting the gateway for the 192.168.2.x network using: route add -net 192.168.2.0 netmask 255.255.255.0 gw 10.0.0.1 But I still can't access internet from PC2. Edit I don't have access to the wifi gateway.

  Read the article

• Windows redirect traffic to different DNS name not fixed IP address (hosts file equivalent)

  - by Arik Raffael Funke

  Using the Windows hosts file, one can redirect traffic for a domain to a specific IP address, e.g. domainA.com -- 127.0.0.1 I am looking for a SIMPLE way to do the same, but for a target domain name not for a target IP address (as this is dynamic), I.e. domainA.com -- domainB.com Addition: After the getting some initial answers I think I need to concretise my question. Situation: I have an application which looks up the IP of the target domain via DNS and then connects via HTTP to the IP address. I do not have control over any proxy settings. Option 1 Basically I am looking for a way to: intercept DNS requests for a domainA.com launch a DNS request for a domainB.com serve the IP of domainB.com in response to the request for domainA.com Without running an entire DNS server. Option 2 If a DNS server is the only way, in the alternative I would also be happy with an solution to how to define a non-standard DNS-server for a single application. Any ideas for wrapper applications, etc?

  Read the article

• CentOS: eth0 not starting on boot

  - by Cameron Aziz

  Whenever I reboot a CentOS Hyper-V VM, eth0 does not start automatically. All I need to do is perform ifup eth0 and all is fixed, but that isn't feasible from ssh! I am starting in runlevel 3. After I perform ifup eth0 on the console: [root@localhost ~]# ifconfig eth0 Link encap:Ethernet HWaddr 00:15:5D:2B:2B:07 inet addr:10.10.0.3 Bcast:10.10.0.255 Mask:255.255.255.0 inet6 addr: fe80::215:5dff:fe2b:2b07/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:34 errors:0 dropped:0 overruns:0 frame:0 TX packets:49 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:4656 (4.5 KiB) TX bytes:6399 (6.2 KiB) Interrupt:9 Base address:0xa000 [root@localhost ~]# cat /etc/sysconfig/network-scripts/ifcfg-eth0 DEVICE=eth0 BOOTPROTO=none IPADDR=10.10.0.3 NETMASK=255.255.255.0 GATEWAY=10.10.0.1 USERCTL=no ONBOOT=yes [root@localhost ~]# chkconfig --list | grep network network 0:off 1:off 2:on 3:on 4:on 5:on 6:off

  Read the article

• Standby Internet connection by means of 3G Modem if Internet Fails

  - by Sarah Boss

  In my office I have 4 computers connected to the Internet with a DIR-615 Wireless N 300 router which gives Internet to all pc's via Ethernet cable. But sometimes this Internet goes off and I have to call the ISP and it takes them 2 days to repair it. I wanted to know if in such cases, can I connect my two zte 3g usb modems to this DIR-615 Wirless N300 router and get emergency Internet in my office? What other steps are required to set up this fail-safe connection?

  Read the article

• Netgear router-speed problem after XBox use

  - by John Dudley

  When my son is at my place at the weekend, he plays XBox Live over the internet, using my wireless network (Netgear 'g' type router). This usually thrashes & crashes the router to the extent I have to hard-boot it to get it working again. However, after this weekend, on my two laptops, I'm left with the problem that the router is working, but I'm only getting 0.38Mbps out of it, at all times of the day. I've tried hard-booting the router, but no difference. Could this be a knock-on effect of the Xbox use? I can't believe the router could be damaged, but working slower? Is that possible? Tiscali haven't come back to me yet on any 'network' issues. Thanks in advance

  Read the article

• Encrypt LAN and wifi traffic on small private network

  - by Grimlockz

  I need some advice about encrypt all traffic on a small private network running wi-fi and LAN traffic on 192.168.0.x network. The network would comprise of client laptops connecting to the wi-fi router (192.168.0.254) via ethernet connection or wireless. The main purpose of the server is for the client laptops to talk to two servers on different IP's (192.168.0.200 and 192.168.0.201) on ports 80 and 433. My main concern is having packet sniffers and what not getting access to the data. The only ways I see at the moment is to have VPN running on the network or use IPSec policy's to do this. Any other ways guys?

  Read the article

• Planning home network

  - by gakhov

  I'm planning to setup my home network from scratch and want to ask professional opinions or tips. My home is connected to Internet with a cable connection (100 Mb/s). The devices I would like to connect are VoIP phone (RJ-45), TV (WiFi/LAN), 3 laptops (WiFi), 2 smartphones (WiFi), an iPad (WiFi), a Kindle (WiFi), a network printer and, probably, a home media storage (WiFi/LAN). As you can see, the most load will be on WiFi connections (probably, even if TV supports WiFi it's better to connect it by LAN?). So, I need help to choose the best router (or combination of routers) to support stable connections for all these devices and minimize the total number of routers/adapters. I like how Cisco/Linksys devices were working for me in the past, so preferably (but not obligatorily) I want to setup network with their solutions. Any thoughts?

  Read the article

• Firebox 1250e Core Failing?

  - by Noah

  We have 2 Firebox 1250e Core firewall boxes in our production environment, serving as an active and passive mode. A few months back, the active box was flashing a warning light, so our consultant removed it, and plugged it in to a test network. Everything appeared to be working fine, so he reloaded it into the production environment, and we didn't see any other issues. Fast forward to last week, and out network was constantly dropping connections over RDC, timing out, and performing as if there was a traffic issue. I turned off the production box and everything began to work fine immediately. At this point though, I'm not sure how to proceed. Should the box be completely replaced? Is there any recommended testing we could do to determine if there is a failure of some type with this device? Should we try upgrading the software on it? I know the environment isn't the issue, since the passive box (which is now the active one) is working fine. We'd like to have 2 in production though for safety failover purposes. I am not a network admin, but am hoping someone here might be able to provide some guidance.

  Read the article

• SSL FTP fails on Windows 7 but not Windows XP clients

  - by Andrew Neely

  We currently use a free SSL-FTP client called Move-It-Freely to transmit data from a custom data entry program at over forty facilities scattered around the state to our central server. Under XP, it works flawlessly. Some facilities have upgraded to Windows 7. On these machines, uploads (transfers to us) work, downloads (transfers from us to them) fail. Replacing the Windows 7 machine with an XP machine solves the problem. We have also verified that the network firewall settings have not changed. This problem persists even if Windows firewall is not running. We were able to remote into one of the Windows 7 machines to verify that the Windows firewall was indeed turned off. We cannot replicate the problem on our own Windows 7 machines, and are at a loss of how to fix this feature for our customers. The data contain health-related information, and needs to be encrypted (hence SSL-FTP.) Despite hours spent on Google, we cannot find a solution.

  Read the article

• Windows 7 freezes on connecting second time to same wifi network

  - by Rakesh Juyal

  I am using Lenovo - y470, which comes with windows 7 home premium. I can connect to my wifi network and there is no issue in that. But the problem comes if the network get disconnected and i again try to connect to same wifi network. As soon as i click on connect my system freezes, and i can not even press ctrl+ alt+ del . The only think i am allowed to do at that time is press and hold power button to shut down the system and restart it again. Please tell me how to resolve this issue. Please let me know if some more information is required. OS: Windows 7 Router: Netgear n-150

  Read the article

• Airport Express with a PC

  - by Margaret Ashcraft

  I have and airport express and my IMac works fine with the internet connection, but my husband's PC in the basement has problems. The wireless connection comes and goes. One minute it says good connection the next unavailable. I have a PC laptop that will pick up the connection in the basement just fine.

  Read the article

• Problem connecting to SSH in office network

  - by Jeune

  I have trouble connecting via SSH to a server whenever I am in the office. I get as far as being prompted for my password and then after that there's a long wait which always ends in a Write failed: Broken pipe This is only for connecting via SSH. I use svn to commit files to a repository hosted on the same server and there are no hitches. Furthermore, this only happens in our office. When I go the university or whenever I am at home or at the coffee shop I am able to connect seamlessly. There are no firewalls in our office. It's just a basic wireless router connected to a modem setup. It's the same setup I have at home and I guess the same setup in the coffee shop. What are the causes for a broken pipe and why does this phenomenon only happen when I try connect via SSH and not when I work with svn on the same server? Updated: Some debug logs after authentication: debug3: packet_send2: adding 48 (len 64 padlen 16 extra_pad 64) debug2: we sent a password packet, wait for reply debug1: Authentication succeeded (password). debug1: channel 0: new [client-session] debug3: ssh_session2_open: channel_new: 0 debug2: channel 0: send open debug1: Entering interactive session. debug2: callback start debug2: client_session2_setup: id 0 debug2: channel 0: request pty-req confirm 1 debug1: Sending environment. debug3: Ignored env ORBIT_SOCKETDIR debug3: Ignored env SSH_AGENT_PID debug3: Ignored env TERM debug3: Ignored env SHELL debug3: Ignored env XDG_SESSION_COOKIE debug3: Ignored env WINDOWID debug3: Ignored env GNOME_KEYRING_CONTROL debug3: Ignored env GTK_MODULES debug3: Ignored env USER debug3: Ignored env LS_COLORS debug3: Ignored env LIBGL_DRIVERS_PATH debug3: Ignored env SSH_AUTH_SOCK debug3: Ignored env DEFAULTS_PATH debug3: Ignored env SESSION_MANAGER debug3: Ignored env USERNAME debug3: Ignored env XDG_CONFIG_DIRS debug3: Ignored env DESKTOP_SESSION debug3: Ignored env LIBGL_ALWAYS_INDIRECT debug3: Ignored env PATH debug3: Ignored env PWD debug3: Ignored env GDM_KEYBOARD_LAYOUT debug1: Sending env LANG = en_PH.utf8 debug2: channel 0: request env confirm 0 debug3: Ignored env GNOME_KEYRING_PID debug3: Ignored env MANDATORY_PATH debug3: Ignored env GDM_LANG debug3: Ignored env GDMSESSION debug3: Ignored env SHLVL debug3: Ignored env HOME debug3: Ignored env GNOME_DESKTOP_SESSION_ID debug3: Ignored env LOGNAME debug3: Ignored env XDG_DATA_DIRS debug3: Ignored env DBUS_SESSION_BUS_ADDRESS debug3: Ignored env LESSOPEN debug3: Ignored env WINDOWPATH debug3: Ignored env DISPLAY debug3: Ignored env LESSCLOSE debug3: Ignored env XAUTHORITY debug3: Ignored env COLORTERM debug3: Ignored env OLDPWD debug3: Ignored env _ debug2: channel 0: request shell confirm 1 debug2: fd 3 setting TCP_NODELAY debug2: callback done debug2: channel 0: open confirm rwindow 0 rmax 32768 UPDATE 2011-14-07: I am able to connect to the server via SSH now. I didn't do anything but that's because there is no one in the office but me! Having said that, is it possible that it has something to do with the number of sessions an SSH server can handle? UPDATE 2011-14-07: I try to login via SSH through Putty on another machine running windows together with my current SSH session in Ubuntu and now it seems my SSH session in Ubuntu has been dropped. I can't type into the terminal. Is Putty the culprit now?

  Read the article

• What does transactions per seconds for a load balancer mean

  - by Anurag

  I was looking at the product matrix of webmux 592G(load balancer). It says maximum connections per sec = 2.8M Maximum number of transactions = 100,000 What does the above numbers mean. Does above means that load balancer can have 2.8M connections open but only 100K of them will be active per seconds. Also incase any one has used webmux 592G do you guys know in practice how many connections it can have open and what qps it can serve

  Read the article

< Previous Page | 117 118 119 120 121 122 123 124 125 126 127 128  | Next Page >