Search Results

Search found 12988 results on 520 pages for 'performance'.

Page 121/520 | < Previous Page | 117 118 119 120 121 122 123 124 125 126 127 128  | Next Page >

  • Low FPS in some games, but hardware not fully used

    - by Mario De Schaepmeester
    I just did a little funny experiment in the game/sim "Train Simulator 2013". I normally have good FPS in it (around 30) at full settings. What I did was make a really, really long train so that the calculations the sim needed to make were enormous (the sim is quite realistic, it takes all things into account like speed/acceleration, G-forces, comfort levels, possible wheel slip and many more, and most of those things on each carriage seperately). This resulted in only 14FPS as reported by the game, but it felt more like 8FPS or so. I have a Logitech G15 keyboard which has an LCD, and it allows me to monitor CPU/RAM and video card load on it. The strange thing is, all CPU cores were busy, but the total load was only about 60% maximum at all times. The video card was only on 30% load (possibly an important note, the memory was full, which is however not unusual for the game in question). The RAM had plenty of room and there weren't many operations as it didn't grow or shrink much. I just have the feeling that the game would run smoother if it used more of my hardware power. Why is it not doing so? I had the same in another game, The Elder Scrolls: Morrowind when using more than 100 mods (that all use scripting) and a few high res texture mods, + a full-on graphics improvement program. The engine is very old (2003), and so I thought this might be the cause (not being optimised for multithreading). I had thought of possible causes, like: The operating system doesn't let the games use all the resources. It doesn't make use of multi-threading appropriately. To eliminate the former, I tried a CPU stress tool and that got 100% CPU juice as I let it run, so the OS is not the problem. I gave its thread the "higher" priority though. My actual question In both games, I did things the engine was not really built to do or support. Can those games' framerate be limited cause of their own engine not being able to cope? What is the real reason and more importantly, can I help it? And in any case, could something actually be wrong with my hardware? It's all reasonably new, a couple of months, and I (almost) never experience any other trouble. Modern and much more demanding games work absolutely fine. Specs CPU: AMD Phenom II 965 X4 @ 3.4gHz RAM: 8GB of DDR3 RAM Video: MSI GTX560 (nVidia chip) with 1GB of GDDR5 memory OS: Windows 7 Ultimate 64 bit Nothing overclocked.

    Read the article

  • Best use of new express card on Windows

    - by jckdnk111
    I just bought a 48GB SSD express card for my laptop and I am trying to decide how best to use it. I will be running some sort of virtualization (prob VirtualBox) to test / learn Windows Server administration. I am running Windows 7 Ultimate 64 bit. I have 4GB of RAM and a 7200 RPM SATA hard disk. The express card will read at 115MB/s and write at 65MB/s. So how best to use this new disk? Readyboost, relocate pagefile, store VM disks, mix / match?

    Read the article

  • WD Caviar Green Extremely Slow

    - by Steven
    I am encountering a really weird problem on my WD Caviar Green HDD. Well first of all I have 2 HDDs on my Desktop, one 160GB Seagate holding my Win7 Ultimate x64 and the problematic one, WD 1.5 Caviar Green for storage purpose. My problem is kinda weird, when I transfer files from my Seagate(C:) to my WD (D:) the speed is good (50-60MB/s). Then the problem arises when I transfer too "many" large files, the transfer speed would go straight down to kilobytes/s. Well after I cancelled the transfer and access my D:, even entering a folder requires loading for like 10 seconds. Such problem not only arises when I am transferring files to my D:, it seems like my WD can't handle much activities. For instance, last time I installed my game on D: and I would face much lag after playing for some time. When the same game is installed on C: no problem arises. Does anyone knows what is the problem? P/S: There was one temporary solution that I used to tried. After the "situation" occurs, I tried to access as many folders on D: as I can and let it load, repeating such actions and giving it some time bring the D: back to speedy transfer. However, large transfers would causes the situation to happen again. Does it have something to do with cache whatsoever?

    Read the article

  • High Steal Time utilization on Apache Linux Server

    - by JMC
    I have a CentOS "development / testing" server that runs extremely slowly. It's running Apache and Mysql using PHP. Top reports that 98% of the CPU utilization is frequently spent on "st" - Steal Time. What could cause a server to spend so much CPU on steal time, and how can I diagnose the problem? I didn't notice the problem until after I granted a third party developer root access (for all I know it has a root kit running, though unlikely).

    Read the article

  • High CPU Steal percentage on Amazon EC2 Instance

    - by Aditya Patawari
    I am experiencing high CPU steal percentage in a Amazon EC2 large instance. I know it means that my virtual CPU is waiting on the real CPU of the machine for time. My question is that what can I do to reduce this percentage and get maximum out of the CPU? Steal percentage is consistently at 20%. System load crosses 10 when this happens. I have checked memory and network and I am sure that they are not the bottleneck. Is that normal for such environment? Also are there any system level optimization techniques for reducing steal percentage form the virtual instance? avg-cpu: %user %nice %system %iowait %steal %idle 52.38 0.00 8.23 0.00 21.21 18.18

    Read the article

  • How dow I remove 1.000.000 directories?

    - by harper
    I found that in a directory more than 1.000.000 subdirectories has been created due to a bug. I want to remove all these directories, let's say in the directory WebsiteCache. My first approach was to use the command line tool: cd WebsiteCache rmdir /Q /S . This will remove all subdirectories except the directory WebsiteCache itself, since it is the current working directory. I noticed after two hours that the directoriws starting with A-H have been removed. Why does rmdir removes the directories in alphabetical order? It must take additional effort to do this ordered. What is the fastest way to delete such an amount of directories?

    Read the article

  • Any ramifications to disabling ClearPageFile

    - by user34710
    I am runing a Dell XPS 15z with a quad core I7, 8gb ram, 7200rpm hdd, windows 7 ultimate. My laptop was taking around 3 minutes to shut down, which seemed far too high to me. I did a bit of investigation, and it seemed that the ClearPageFile reg entry was set to 1, meaning that upon shutdown my pagefile.sys was being cleared before actually shutting the machine down. When I disable this setting, my laptop shuts down in about 20 seconds - clearly a big gain. My question is, are there any side effects of having this turned off (other than the security risk of the HDD being stolen, and still having any important info that was in the RAM up for grabs)?

    Read the article

  • What does the 'Burst Rate' stat mean in HDTune?

    - by UpTheCreek
    I recently upgraded my laptop's v slow hard drive to a seagate momentus 7200. Everything is working fine, but I'm a bit confused by these benchmark results: The burst rate is significantly less than the Maximim transfer rate, and not much higher than the normal minimum (if you ignore the spikes). What's going on here? On the HDtune website it defines Burst Rate as: ...the highest speed (in megabytes per second) at which data can be transferred from the drive interface (IDE or SCSI for example) to the operating system. Which begs some questions... e.g. if this is the highest, then how did the bechmarking tool record the 103MB/sec maximum? And if this really is the true maximum, then where is the bottleneck? The laptops SATA interface is on an Intel 82801GBM southbridge controller. When I check in hardware manager, I see that it's driver is iaStor.sys from 2005. Maybe that's the issue? I'll look for a newever version, but any insights would be appreciated. Thanks

    Read the article

  • What are your tricks for optimizing your Subversion configuration?

    - by Scott Markwell
    For a Linux or Windows system, what tricks do you do to optimize your Subversion server? The following are my current tricks for a Linux system serving over Apache with HTTPS and backed by Active Directory using LDAP authentication. Enabling KeepAlive on Apache Disable SVNPathAuthz Increase LDAP Cache Using the FSFS storage method instead of BDB Feel free to call this into question. I don't have hard proof that FSFS out performs BDB, only lots of tribal knowledge and hearsay.

    Read the article

  • How do you disable the magnifier in Windows Vista?

    - by PhantomDrummer
    Every so often while I'm working, if I accidentally jolt the mouse, the magnifier starts. I'm fairly sure the cause is that some comination of mouse keys is supposed to start the magnifier, and I occasionally hit the right keys accidentally. However, I've never been able to reproduce the behaviour deliberately so I don't know which combination. This is very annoying since switching the magnifier off is non-trivial (control panel, or run dialog, which are hard to use when the magnifier keeps - ummm - windowing and magnifying the bit of screen you're about to click on :-) ). So I'm wondering if there's any way to disable the magnifier completely, so that it doesn't start when you do whatever it is you'd normally do to the mouse to start it? Anyone know?

    Read the article

  • Send request body data when running siege

    - by qui
    I am trying to use the command line utility Siege to load test a service. The service recieves json in the request body via a POST. I have a file called example-data.json with the json inside. I will eventually turn this into a tiny service which creates random json for testing, but this should do for now I have another file called hit-qa.siege with http://www.qa-url.com POST < example-data.json and i try and run siege -c10 -d1 -r1 -f ops/perf/hammer-dev.siege When I check the logs of the service, it is not recieving anything in the request body. My googles have been fruitless, does anyone know how to accomplish this?

    Read the article

  • Using an Internal HDD as an External HDD also or an External HDD for installing SAP ?

    - by Asterix
    Is it possible and advisable to use an Internal Hard Drive as an External Hard drive also. I wanted to install SAP ECC 6 on my system which has only 250 GB but atleast 300 GB is required.I wanted to buy an External Drive first, then I heard loading SAP on an External would make it extremely slow. I'll be using it only as a beginer so even if it is a little slow i don't mind. Is it feasible to run such a big application from an External Hard disk ? So can i purchase a 500 or 1 TB Internal Hard disk and use it as an External too by fitting it with the necessary USB 3.0 Hard drive cases and cables ? or should i purchase a External and load SAP onto it ? Thank you.

    Read the article

  • Why does Oracle SQL Developer take so long to open?

    - by oscilatingcretin
    I think anyone who's used Oracle SQL Developer will agree that it's painfully slow on the load. My research has lead me to a solution that seems to have helped a little, and that's telling OSQLD not to check for updates on startup. However, it still takes several minutes to open. What could OSQLD possibly be doing during load time? Is there any way get it to open right away? Edit: Adding potentially relevant system specs: CPU: Intel i5-2520M 2.5 ghz Windows 7 32-bit RAM: 4 gb

    Read the article

  • How many megabytes per second may I expect from a gigabit USB 2.0 network card under linux?

    - by Nakedible
    I'm interested in the actual real-word throughput attainable with an external 1000BaseT USB 2.0 network card under Linux. I have been able to attain 90 megabytes per second on a PCI-E interface, but the USB 2.0 bus has a theoretical limit of 480Mbit/s, and in practice less than 40 megabytes per second. Is the actual throughput attainable with such a card under linux 40, 30, 20, or even as low as 10 megabytes per second, eg. no better than a normal 100BaseT network card?

    Read the article

  • Load testing nginx inside AWS

    - by andy
    I'm trying to load test nginx running on AWS. I need to try to optimise it to handle 1Gbps of inbound traffic. Currently I've got it to peak at 85Mbit/s by running nginx on an m1.large with 4 other machines hitting it by using ab with -i (for head requests) -k (keepalives) -r (ignore failed requests) -n 500000 -c 20000. I'm struggling to generate more than 85 Mbit/s traffic from 4 machines, yet when I do scp a large file I get nearly 0.25Gbit/s of traffic going over the network. Are there any tools or approaches that I could use to load test nginx that might generate more load? I'm only interested in inbound traffic, so perhaps a DoS tool could help if it chucks away responses? I'm hitting a very small (40 byte) static asset, and have peaked at handling 50K concurrent connections and getting 25k reqs/s when just using a single load generator machine.

    Read the article

  • MicrosoftOnline Migration - Why do I have to wait several minutes before I can click "Finish?"

    - by Giffyguy
    I'm using the MicrosoftOnline Internet E-Mail Mailbox Migration Wizard. I'm moving my email from several GMail accounts to my Microsoft Exchange Online mailboxes. Every time I migrate all or part of a GMail mailbox, I have to wait about five minutes after it completes migration before the Finish button becomes available. What is going on during this time? Is it something I am doing wrong, or is the system just slow?

    Read the article

  • Removing 'bundled' software to make a slow laptop faster?

    - by spdegabrielle
    My brother-in-law has a cheap HP laptop used by his kids for schoolwork. It had got into a bit of a state and was running slowly with some dubious software. I removed a bunch of stuff that had been installed, that was obviously not required (three different driver scanners!), had been downloaded in error or looked like malware. I also disabled as many 'start on login' apps as I could and removed AVG replacing it with MSE. (AVG is uninstalled and replaced with MSE after failing to detect malware) What remains is a significant quantity of bundled HP and 'nero backup' software, including a HP restore utility (apparently something like the osx hidden partition restore), the trackpad driver. is there anything else I can do to breath a little more life into the old 'celeron' laptop? Should I bit the bullet and just put win8 on it? Will the trackpad still work?

    Read the article

  • SQL Server - VMWare install - Utilize more RAM

    - by alex
    We have a SQL server machine - It’s a VMWare image (running on ESXi hardware etc..) It has windows 2008 x64 standard The SQL install is SQL 2008 standard The virtual machine has 12gb of RAM, and 4 virtual CPU The box is suffering from near 100% CPU a lot of the time I enabled the AWE- but SQL server only seems to use 3-4gb of RAM Is there a way of making it use more available ram more effectively? cache results for example..?

    Read the article

  • How to find out which process is hogging the linux server?

    - by user1149518
    We have a RHEL server. Today it suddenly became slow. Symptoms - It was responding slow to ping queries from other server. When I try to login using ssh, it was taking about 10 seconds to login. I was able to resolve the problem by doing some guess work. I killed one process which I thought was culprit. Which resolved the problem. Though I would like to know what's proper approach to detect the culprit in such kind of "slow server" situations. Le me know proper way to resolving such slowness issues and decting the process causing the slowness. These were the conditions when the server was slow - # vmstat 3 3 procs -----------memory---------- ---swap-- -----io---- --system-- -----cpu------ r b swpd free buff cache si so bi bo in cs us sy id wa st 1 1 176 6730868 285052 4899676 0 0 3 4 0 0 1 1 97 1 0 0 0 176 6751576 285064 4899704 0 0 0 115 15307 37171 1 1 96 3 0 0 0 176 6751948 285068 4899700 0 0 0 23 14813 39559 1 1 98 1 0 # top top - 16:38:18 up 150 days, 19:36, 64 users, load average: 1.68, 1.46, 1.44 Tasks: 1287 total, 2 running, 1284 sleeping, 1 stopped, 0 zombie Cpu(s): 1.3%us, 1.7%sy, 0.1%ni, 95.9%id, 0.7%wa, 0.0%hi, 0.2%si, 0.0%st Mem: 16620824k total, 9867124k used, 6753700k free, 287424k buffers Swap: 8193140k total, 176k used, 8192964k free, 4898996k cached PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND 26258 khk 34 19 130m 47m 7088 S 11.2 0.3 385:32.42 edm Though I would like to know what's proper approach to detect the culprit in such kind of "slow server" situations. Le me know proper way to resolving such slowness issues and decting the process causing the slowness.

    Read the article

  • Would upgrading memory from 4GB to 8GB on my laptop solve swapping issues?

    - by Tom
    I have a laptop with 4GB of memory with Windows 7 on it and I often experience with Eclipse that it is swapped out to disk. On the net they usually write 4GB of RAM is more than enough for average use and aside from Eclipse+Android Emulator I don't really use other extra apps, yet Eclipse is always swapped out if I haven't used it for a while (say, 1 day) and it is annoying it to wait for it to be resurrected from swap. My question is: would an upgrade to 8GB solve the issue of swapped out applications? With 8GB would windows 7 keep everything in memory? Or it wouldn't change anything and Eclipse would be swapped out regardless of the amount of memory, because Win 7 has a habit of kicking out every application from memory which hasn't be used for a while?

    Read the article

  • Why is piping dd through gzip so much faster than a direct copy?

    - by Foo Bar
    I wanted to backup a path from a computer in my network to another computer in the same network over a 100MBit/s line. For this I did dd if=/local/path of=/remote/path/in/local/network/backup.img which gave me a very low network transfer speed of something about 50 to 100 kB/s, which would have taken forever. So I stopped it and decided to try gzipping it on the fly to make it much smaller so that the amount to transfer is less. So I did dd if=/local/folder | gzip > /remote/path/in/local/network/backup.img.gz But now I get something like 1 MB/s network transfer speed, so a factor of 10 to 20 faster. After noticing this, I tested this on several paths and files and it was always the same. Why does piping dd through gzip also increase the transfer rates by a large factor instead of only reducing the bytelength of the stream by a large factor? I'd expected even a small decrease in transfer rates instead, due to the higher CPU consumption while compressing, but now I get a double plus. Not that I'm not happy, but just wondering. ;)

    Read the article

  • Sendmail slow to accept emails

    - by Rich
    I have a PHP web app which is using SMTP to sendmail on localhost to send email. I would like sendmail to accept the mail request immediately and queue it for later sending, as I don't want to have user-facing request threads blocked on emails. Sendmail is installed with the default settings on RHEL web servers. Sometimes sendmail is blocking for a long time after the MAIL command is sent -- sometimes taking 60 or 90 seconds to accept the mail. The time take is usually very close to 60 or 90 sec, which makes me think this is some kind of timeout. I have looked in the sendmail logs, and there are plenty of "deferred" emails, but nothing which looks responsible for this delay. How can I diagnose what is slowing down sendmail? How can I configure sendmail to always accept the mail immediately and to queue the mail for later sending? Update: I'm not sure, but it looks like this might be linked to aol.com addresses. I strongly suspect that sendmail is doing some kind of blocking receipient address verification at the accept-email-for-sending stage. How can I disable that, so that sendmail doesn't block my UI threads? Update 2: This only seems to happen at busy times. Perhaps I am running out of sendmail threads or something? How can I check that?

    Read the article

  • How can I determine Breaking point of my Web application using JMeter?

    - by Gopu Alakrishna
    How can I determine Breaking point of my Web application using JMeter? I have executed the JMeter Testplan with different concurrent users load. EX. 300 users(0% error), 400 users(7% error in a sample, 5% error in another sample), 500 users(more than 10% error in 4 out of 6 samples). At What value of % Error, I can say system reached the Breaking point.I used concurrent users 300, 400, 500 in a PHP website. Should I consider any other parameter to determine breaking point. How many maximum concurrent users my application can support?

    Read the article

  • Difference between all servers in one cluster and more than one cluster with servers?

    - by silla
    Not sure I understand what´s the difference or how it works when servers a running in one cluster or if there are more than one clusters with servers in it - regard High availability & Load Balancing. For me they are somehow the same, there is not really a big difference. Let´s make a simple example: 2 Servers in 1 Cluster 2 Clusters with each 1 Server - 1. If one Server failure, the other one is able to continue the work. The same for Load Balancing, these two Servers are able to balance the work together. - 2. The same thing! If one Server failure... The only thing that could be a problem with point 1. is if the Cluster fails (then both of the Server are dead). But is this even possible? I was reading stuff about clustering and high availability but I think I do not get this really. Probably I did not really understand how a cluster is working. Are these 2 points with 1 Cluster and 2 Clusters somehow the same or are there really some big differences? What should I know about it? Thank you

    Read the article

  • A good free software for freeing up RAM Memory in Windows 7(64bit)

    - by Flavius Frantz
    I am looking for a good windows 7 software to free up RAM memory on my PC... i tried some ones I found on google but they were bad stuff... with viruses, spamware etc... i want a free clean professional software, if you don't know a good one thats free, please recommend a payed version. Also other tips/software to speed up my pc(on win7- 64bit) and such utilities. Also software to measure temperature would be great... If you can make a "must have" list of such software... Thank you I am a graphic designer, usually using this stack exchange for graphic design questions, now I realised there is this superuser one... nice :) [I usually have a lot of running programs, such as Photoshop, Flash, Illustrator, InDesign, running at the same time... with only 4GB of RAM memmory.. any tips to improve my PC perfomance would be great... I have a Asus K50IP Notebook]

    Read the article

< Previous Page | 117 118 119 120 121 122 123 124 125 126 127 128  | Next Page >