printer driver - Page 121

Printing JTables without formatting of the original component

- by EricR

I'm writing an application which utilises tables which can be printed if the user so desires and I wish to print a JTable filled with data, except I haven't been able to find an option to remove the formatting; the printed tables looks like it does in the GUI (based on the system theme) which is making the table less readable and using excess ink. I wish to print the same data with clear formatting. Is there a way to do this straight from a JTable or is my best option simply to print to a file and have the use printer from there. Currently it functions through a viewer which gives the user some options for printing, and then it goes to the system's printer.

Read the article

Program LED with just USB port

- by LifeH2O

I want to control LED with C# using only USB port. I don't want to attach any other device with USB. I just want to attach LED directly to USB port pins and program it (blink etc). How can i do that? I am new to hardware programming and it will be my first program. EDIT: I can do it already (blink LED) using printer port by attaching one led pin to data pin and other to ground. How can i do the same with USB port? My motherboard does not have a printer port. USB is the only option.

Read the article

Printing complex widgets in Qt

- by Jens

I have a complex widget with tons of different subwidgets, e.g. subclasses of QLabel. I want to print this widget, but obviously I do not want to print the background, I want to print with differing text colors or have the style of frames slightly modified. As I do not really want to iterate through all subwidgets with a special "print" function, which I would need to attach to all widgets (how to add "print" to a QLabel?), I would like to use paintEvent. If I have a hierarchy MyWidget - derived from - some QWidget, I would like to insert a sublayer MyWidget - MyPrintWidget - some QWidget, where myPrintWidget::paintEvent would check, if the current print is going to the screen (thus call QWidget::paintEvent), else if we are printing to the printer, call some function MyPrintWidget::drawWidget instead. Is this the right way to print-enable a widget? How can I figure out in paintEvent, that I'm printing to a printer instead of the screen? Is there a good example of printing complex widgets?

Read the article

Produce high-quality, custom-size thumbnails from Office documents on Windows?

- by Edwin

Hi, What do you think would be the best way to produce custom size image thumbnail from MS Office documents (doc, xls and ppt) on Windows with native code (means all means besides .NET/JAVA)? My current research result: IExtractImage COM. Problem: The size of the generated result is fixed and low quality, and you can't be sure all the source documents contain the thumbnails. Use a programmable virtual printer to print the specified page, and the printer must support image output, any good suggestion for this? What else would you suggest? thanks!

Read the article

create and insert values using mysql JDBC

- by S.PRATHIBA

Hi all, I have the sample code. public void UpdateTable1() { for(int t=0;t<20;t++) { if(consumer==1 && number==1 && provider1==31 && feedback==1) { try{ Class.forName(driverName); con = DriverManager.getConnection(url+dbName,"root","mysql"); try { Statement st = con.createStatement(); int val = st.executeUpdate("INSERT Consumer1 VALUES ("+31+","+"'Printer'"+", "+1+" "+")"); System.out.println("1 row affected"); } catch (SQLException s) { System.out.println("SQL statement is not executed!"); } con.close(); } I want to insert the same set of values(31,printer,1) into the table consumer2,consumer3.Is it possible without using another try catch statements...Please help me.

Read the article

Print PDF from ASP.Net without preview

- by nmiranda

Hi, I've generated a pdf using iTextSharp and I can preview it very well in ASP.Net but I need to send it directly to printer without a preview. I want the user to click the print button and automatically the document prints. I know that a page can be sent directly to printer using the javascript window.print() but I don't know how to make it for a PDF. Edit: it is not embedded, I generate it like this; ... FileStream stream = new FileStream(Request.PhysicalApplicationPath + "~1.pdf", FileMode.Create); Document pdf = new Document(PageSize.LETTER); PdfWriter writer = PdfWriter.GetInstance(pdf, stream); pdf.Open(); pdf.Add(new Paragraph(member.ToString())); pdf.Close(); Response.Redirect("~1.pdf"); ... And here I am.

Read the article

Creating a Non-Databound Report in Winforms

- by Jon

I am using Visual Studio 2008 and all the components that come with it as well as Infragisitics for Winforms. I need to design a label that will print to a label printer. None of the controls are databound and will most likely be set in code eg/Label.Text = "My Heading"; as there will be minimal information on the label. One piece of information is a barcode so I need the functionality to do that, I assume I can just set the font of the label to barcode and it will do its thing. Can I just add a Crystal Report to a form design it, set the label text properties in code, tell it what printer to print to and then call report.Print(); I've had a quick go and seems not as easy as I thought. Thanks

Read the article

Hiding "Print to file" in a Java print dialog

- by Carl Smotricz

I'm maintaining this Swing app that has a "print" option. Users need to be kept from interacting in any way with the underlying file system, but the print dialog offers "print to file" as one printer, and that of course allows selecting a directory and file from the file system. Is there a painless way to override/modify the print dialog to hide the "to file" printer from this dialog? I understand the API will let me do this piecemeal but I'd rather not have to re-create most of the dialog GUI and functionality to do this.

Read the article

Identify a non-computer network device?

- by Avilan

I'm current working on a program that scans my network and discoveres computers and devices on the network. I use various operations to find data on the devices I discover, but want to distinguish the network devices from computers. And I'm wondering if anyone knows how I could do this? I looked a bit at SNMP, and tried connecting to my network printer, router and modem. But I seem to only be able to connect to the printer, neither the router or modem responds. Is there another way to identify what kind of a device an IP address belongs to?

Read the article

Max. # of printers allowed for google cloud print

- by user1858673

I intend to write an online shopping program using PHP. When the buyer completes an order I want to print the receipt to his/her printer using Google Cloud Print. For that I will need the buyer to shared his/her printer with my Google account. My questions are: 1. Is there an upper bound for the number of printers a Google account is allowed to print to? 2. Is there a daily upper bound for the number of print jobs a Google account is allow? Thanks for reading and thanks for the answers in advance.

Read the article

Function which returns itself

- by Juliet

As a purely academic exercise (read "because I have no life"), I'm trying to write a function f which accepts another function g, executes g for its side effect, and returns itself. So I have this: let rec f g x = ignore(g x) fun y -> f g y F# complains: fun y -> f g y;; -------------^^^^^ C:\Users\Juliet\AppData\Local\Temp\stdin(8,14): error FS0001: Type mismatch. Expecting a 'a but given a 'b -> 'a The resulting type would be infinite when unifying ''a' and ''b -> 'a' If it works the way I intend, then I could write: let printer = f (printfn "%s") printer("this")("is")("so")("useless")("its")("awesome!") // prints: // this // is // so // useless // its // awesome Is it possible to write a function like this?

Read the article

Printing python tkinter output

- by Eric

I am trying to print the contents of a python tkinter canvas. I have tried using the postscript method of canvas to create a postscript file, but I get a blank page. I know this is because I have embedded widgets, and these do not get rendered by the postscript method. Before I rewrite my program to create a more printer-friendly layout, can someone suggest a way to approach this problem? All of the programming books I have ever read approach the problem of sending output to a printer with a bit of hand-waving, something along the lines of: "It's a difficult problem that depends on interacting with the operating system." I also have a hard time finding resources about this because of all the pages related to printing to the screen. I am using Python 2.6, on Ubuntu 9.04.

Read the article

Forward traffic between two VLANs.

- by Michael

I have a small network with two VLANs. One is our internal network for basic file sharing, etc and the other is a public wifi network for our customers. The internal network is configured as 192.168.1.x and the public wifi is 192.168.11.x. We have one printer at 192.168.1.50. I would like to be able to have that printer available to our customer at 192.168.11.50. I suspect it can be done with iptables, but I'm brand new to it and I just can seem to work out the syntax. Can anyone offer any help? Oh, this is all running on a wrt54g router running Tomato.

Read the article

Best method to print using wpf 4

- by user293545

Howdy, I need to be able to print from my wpf application. I am just trying to print a transaction receipt. I have found that using PrintDialog pDialog = new PrintDialog(); pDialog.PrintVisual(new Receipt("transaction name","my store"), "documentTitle"); Does the trick very nicely. "Receipt() is a usercontrol that renders out the transaction details. How are you meant to do this? is this the correct way? what do I do if I dont know the printer that is going to be used? should I make the usercontrol only as wide as a thermal receipt printer? Any suggestions would be great!

Read the article

C# Different class objects in one list

- by jeah_wicer

I have looked around some now to find a solution to this problem. I found several ways that could solve it but to be honest I didn't realize which of the ways that would be considered the "right" C# or OOP way of solving it. My goal is not only to solve the problems but also to develop a good set of code standards and I'm fairly sure there's a standard way to handle this problem. Let's say I have 2 types of printer hardwares with their respective classes and ways of communicating: PrinterType1, PrinterType2. I would also like to be able to later on add another type if neccessary. One step up in abstraction those have much in common. It should be possible to send a string to each one of them as an example. They both have variables in common and variables unique to each class. (One for instance communicates via COM-port and has such an object, while the other one communicates via TCP and has such an object). I would however like to just implement a List of all those printers and be able to go through the list and perform things as "Send(string message)" on all Printers regardless of type. I would also like to access variables like "PrinterList[0].Name" that are the same for both objects, however I would also at some places like to access data that is specific to the object itself (For instance in the settings window of the application where the COM-port name is set for one object and the IP/port number for another). So, in short something like: In common: Name Send() Specific to PrinterType1: Port Specific to PrinterType2: IP And I wish to, for instance, do Send() on all objects regardless of type and the number of objects present. I've read about polymorphism, Generics, interfaces and such, but I would like to know how this, in my eyes basic, problem typically would be dealt with in C# (and/or OOP in general). I actually did try to make a base class, but it didn't quite seem right to me. For instance I have no use of a "string Send(string Message)" function in the base class itself. So why would I define one there that needs to be overridden in the derived classes when I would never use the function in the base class ever in the first place? I'm really thankful for any answers. People around here seem very knowledgeable and this place has provided me with many solutions earlier. Now I finally have an account to answer and vote with too. EDIT: To additionally explain, I would also like to be able to access the objects of the actual printertype. For instance the Port variable in PrinterType1 which is a SerialPort object. I would like to access it like: PrinterList[0].Port.Open() and have access to the full range of functionality of the underlaying port. At the same time I would like to call generic functions that work in the same way for the different objects (but with different implementations): foreach (printer in Printers) printer.Send(message)

Read the article

CodePlex Daily Summary for Thursday, April 12, 2012

CodePlex Daily Summary for Thursday, April 12, 2012Popular ReleasesSnmpMessenger: 0.1.1.1: Project Description SnmpMessenger, a messenger. Using the SNMP protocol to exchange messages. It's developed in C#. SnmpMessenger For .Net 4.0, Mono 2.8. Support SNMP V1, V2, V3. Features Send get, set and other requests and get the response. Send and receive traps. Handle requests and return the response. Note This library is compliant with the Common Language Specification(CLS). The latest version is 0.1.1.1. It is only a messenger, does not involve VACM. Any problems, Please mailto: wa...Python Tools for Visual Studio: 1.1.1: We’re pleased to announce the release of Python Tools for Visual Studio 1.1.1. Python Tools for Visual Studio (PTVS) is an open-source plug-in for Visual Studio which supports programming with the Python language. PTVS supports a broad range of features including: • Supports CPython and IronPython • Python editor with advanced member and signature intellisense • Code navigation: “Find all refs”, goto definition, and object browser • Local and remote debugging • Profiling with multiple view...Supporting Guidance and Whitepapers: v1 - Team Foundation Service Whitepapers: Welcome to the BETA release of the Team Foundation Service Whitepapers preview As this is a BETA release and the quality bar for the final Release has not been achieved, we value your candid feedback and recommend that you do not use or deploy these BETA artifacts in a production environment. Quality-Bar Details Documentation has been reviewed by Visual Studio ALM Rangers Documentation has been through an independent technical review All critical bugs have been resolved Known Issue...Microsoft .NET Gadgeteer: .NET Gadgeteer Core 2.42.550 (BETA): Microsoft .NET Gadgeteer Core RELEASE NOTES Version 2.42.550 11 April 2012 BETA VERSION WARNING: This is a beta version! Please note: - API changes may be made before the next version (2.42.600) - The designer will not show modules/mainboards for NETMF 4.2 until you get upgraded libraries from the module/mainboard vendors - Install NETMF 4.2 (see link below) to use the new features of this release That warning aside, this version should continue to sup...DISM GUI: DISM GUI 3.1.1: Fixes - Fixed a bug in the Delete Driver function - The Index field is now auto populated with the number 1LINQ to Twitter: LINQ to Twitter Beta v2.0.24: Supports .NET 3.5, .NET 4.0, Silverlight 4.0, Windows Phone 7.1, and Client Profile. 100% Twitter API coverage. Also available via NuGet.Kendo UI ASP.NET Sample Applications: Sample Applications (2012-04-11): Sample application(s) demonstrating the use of Kendo UI in ASP.NET applications.Json.NET: Json.NET 4.5 Release 2: New feature - Added support for the SerializableAttribute and serializing a type's internal fields New feature - Added MaxDepth to JsonReader/JsonSerializer/JsonSerializerSettings New feature - Added support for ignoring properties with the NonSerializableAttribute Fix - Fixed deserializing a null string throwing a NullReferenceException Fix - Fixed JsonTextReader reading from a slow stream Fix - Fixed CultureInfo not being overridden on JsonSerializerProxy Fix - Fixed full trust ...SCCM Client Actions Tool: SCCM Client Actions Tool v1.12: SCCM Client Actions Tool v1.12 is the latest version. It comes with following changes since last version: Improved WMI date conversion to be aware of timezone differences and DST. Fixed new version check. The tool is downloadable as a ZIP file that contains four files: ClientActionsTool.hta – The tool itself. Cmdkey.exe – command line tool for managing cached credentials. This is needed for alternate credentials feature when running the HTA on Windows XP. Cmdkey.exe is natively availab...Dual Browsing: Dual Browser: Please note the following: I setup the address bar temporarily to only accepts http:// .com addresses. Just type in the name of the website excluding: http://, www., and .com; (Ex: for www.youtube.com just type: youtube then click OK). The page splitter can be grabbed by holding down your left mouse button and move left or right. By right clicking on the page background, you can choose to refresh, go back a page and so on. Demo video: http://youtu.be/L7NTFVM3JUYCslaGenFork: Rules sample v.1.1.0: On projects for CSLA v.4.2.2, added 5 new Business Rules: - DependencyFrom - RequiredWhenCanWrite - RequiredWhenIsNotNew - RequiredWhenNew - StopIfNotFieldExists Added new projects for CSLA v.4.3.10 with 6 new Business Rules: - DependencyFrom - FieldExists - RequiredWhenCanWrite - RequiredWhenIsNotNew - RequiredWhenNew - StopIfNotFieldExists Following CSLA convention, SL stands for Silverligth 5 and SL4 stands for Silverlight 4. NOTE - Although the projects for CSLA v.4.1.0 still exist, thi...Multiwfn: Multiwfn 2.3.3: Multiwfn 2.3.3Liberty: v3.2.0.1 Release 9th April 2012: Change Log-Fixed -Reach Fixed a bug where the object editor did not work on non-English operating systemsCommonData - Common Functions for ASP.NET projects: CommonData 0.3L: Common Data has been updated to the latest NUnit (2.6.0) The demo project has been updated with an example on how to correctly compare a floating point value.ASP.Net MVC Dynamic JS/CSS Script Compression Framework: Initial Stable: Initial Stable Version Contains Source for Compression Library and example for usage in web application.Path Copy Copy: 10.1: This release addresses the following work items: 11357 11358 11359 This release is a recommended upgrade, especially for users who didn't install the 10.0.1 version.ExtAspNet: ExtAspNet v3.1.3: ExtAspNet - ?? ExtJS ??? ASP.NET 2.0 ???，????? AJAX ?????????? ExtAspNet ????? ExtJS ??? ASP.NET 2.0 ???，????? AJAX ??????????。 ExtAspNet ??????? JavaScript，?? CSS，?? UpdatePanel，?? ViewState，?? WebServices ???????。 ??????: IE 7.0, Firefox 3.6, Chrome 3.0, Opera 10.5, Safari 3.0+ ????：Apache License 2.0 (Apache) ??：http://extasp.net/ ??：http://bbs.extasp.net/ ??：http://extaspnet.codeplex.com/ ??：http://sanshi.cnblogs.com/ ????： +2012-04-08 v3.1.3 -??Language="zh_TW"?JS???BUG（??）。 +?D...Coding4Fun Tools: Coding4Fun.Phone.Toolkit v1.5.5: New Controls ChatBubble ChatBubbleTextBox OpacityToggleButton New Stuff TimeSpan languages added: RU, SK, CS Expose the physics math from TimeSpanPicker Image Stretch now on buttons Bug Fixes Layout fix so RoundToggleButton and RoundButton are exactly the same Fix for ColorPicker when set via code behind ToastPrompt bug fix with OnNavigatedTo Toast now adjusts its layout if the SIP is up Fixed some issues with Expression Blend supportHarness - Internet Explorer Automation: Harness 2.0.3: support the operation fo frameset, frame and iframe Add commands SwitchFrame GetUrl GoBack GoForward Refresh SetTimeout GetTimeout Rename commands GetActiveWindow to GetActiveBrowser SetActiveWindow to SetActiveBrowser FindWindowAll to FindBrowser NewWindow to NewBrowser GetMajorVersion to GetVersionBetter Explorer: Better Explorer 2.0.0.861 Alpha: - fixed new folder button operation not work well in some situations - removed some unnecessary code like subclassing that is not needed anymore - Added option to make Better Exlorer default (at least for WIN+E operations) - Added option to enable file operation replacements (like Terracopy) to work with Better Explorer - Added some basic usability to "Share" button - Other fixesNew ProjectsAzure Diagnostics Monitor: Just another tool to monitor the Windows Azure Diagnostics logs. The tool runs on Windows and requires .NET Framework 4.0.BSF - Business solution framework: BSF covers components and patterns that span from server to client side. It focuses on developer's productivity and rich configurable operational support. Its main goal is to streamline business solution development letting developers focus on business requirements.ceshi: makes it easier for cms cmdb hierarquico: CMDB leve organizado de forma hierárquica, e com opção para ter informações criptografadas CRCMS: CRCMS PhoenixFong Plugin Engine: This is a basic plugin engine that was written in Visual Basic.NET. It can be placed in applications so that they can easily be extended.Golabetoon: This is my AI Project trying to change Finglish writing to FarsiHomeProjects: Collection of Many "Home" ProjectsHyper-V Management Library in C#: A C# library to manage Hyper-V server (network switch settings, VM configurations, etc.) via WMI APIsIQ.DbA: IQ.DbA is a light weight database management tool. - Easily browse through your table's data, run queries. - Compare schema / meta data. - Compare & synchronize table data (schema must be the same). - Create, Backup & Restore Db. - View & kill connections.JavaProjects: Proyectos en javaLLBLGen Pro LINQPad Driver: LINQPad driver for LLBLGen Pro v3.5 or higher. The LLBLGen Pro v3.5 LINQPad driver is the official LINQPad driver for LLBLGen Pro v3.5 from Solutions Design bv. It contains all the features necessary to use your generated code assemblies (adapter or selfservicing) directly onto your database using Linq, QuerySpec or the low-level query api. Developed by Solutions Design and Jeremy Thomas.Mini-C#: Interactive C# interpreter using Roslyn.Orchard HTML KickStart: This Orchard CMS module allows you to activate the HTML KickStart scripts and stylesheets without changing your existing theme. The HTML KickStart scripts and stylesheets can be turned on through settings.persistance_personnels_elabouyi: Projet d'étude test TFSqBugger: Powered by qSoftware the fast ajax Professional Issue Tracker.Realm Offline Server: Nonesaleprice: This project is about sale systemScrum Factory 2012: This is the newest and improved version of The Scrum Factory. Scrum Factory is a client-server application that helps teams to conduct software development projects using Scrum methodology. SQL Server Error Log Parsing module: The SQL Server Error Log Parsing module enables efficient analysis of SQL Server's error log (ERRORLOG). This binary PowerShell module parses the ERRORLOG text file and returns the corresponding message IDs and message parameters.Sql Team Server: Sql Team Server aims to provide database compare and synchronization across project teams and members.T4MVC: T4MVC is a T4 template for ASP.NET MVC apps that creates strongly typed helpers that eliminate the use of literal strings when referring the controllers, actions and views.The HTTP Web Server: The HTTP Web Server is an easy-to-use, FAST web hosting server that is written in C#. It has a built-in Install/Uninstall menu and is console based.The Uncle Tony Project: We're going to test the team explorer thing.tigera: a source depot from 2007-now I had written. + ---- exchanges api & framework VxiChat: P2P chatingWCF Data Services Action Provider for Entity Framework: This is a sample implementation of a WCF Data Services IDataServiceActionProvider for the Entity FrameworkWindows Phone SSLStream: WIPWorld of Warcraft Backit up(wow backit up): a project that helps you backup and restore your settings in wow easilyWT Analyse: A GUI Front end for FAST, using XFOIL, utilising AirfoilPrep Code. Written in C#.wuhua tutorial: wuhuaXSockets.WebRTC.Prototype: This example project of XSockets.NET WebRTC Support using WebSockets, PeerConnection, getUserMedia and more is built to show you how we can put together powerfull Realtime audio/video chats just using the browser.????SDK: Help people find your project. Write a concise, reader-focused summary.

Read the article

Failure connecting to Dell MD3200i from XenServer 6.2 pool

- by Tom Sparrow

This question also asked at Citrix Forums http://forums.citrix.com/thread.jspa?threadID=332289 I have a MD3200i that is currently working fine with my Xen5.6 pool, but I cannot get a connection to the new 6.2 pool to work. I previously had a problem with a 6.0 upgrade (which is why the old pool is still on 5.6), but rolled back rather than fix it as it wasn't urgent at the time. This install is on new machines - I tried 6.1 first (which had the same problems) then 6.2 was released the second day after installation so I switched to that. I've not installed anything from the Dell resource DVD at this point - I can't find anything saying I should, and everything I have read suggests it shouldn't be necessary. I can ping all 8 ip addresses from both servers in the pool, iscsiadm -m discovery works fine, I can login to the nodes and iscsiadm reports the sessions active correctly. I've added the required sections to multipath.conf, but multipath -ll reports DM multipath kernel driver not loaded immediately after boot. The following is a log of a test session immediately after boot. root@xen3 ~]# iscsiadm -m node --loginall=all Logging in to [iface: default, target: iqn.1984-05.com.dell:powervault.md3200i.6782bcb0006bd850000000004ed88b91, portal: 192.168.130.101,3260] Logging in to [iface: default, target: iqn.1984-05.com.dell:powervault.md3200i.6782bcb0006bd850000000004ed88b91, portal: 192.168.131.101,3260] Logging in to [iface: default, target: iqn.1984-05.com.dell:powervault.md3200i.6782bcb0006bd850000000004ed88b91, portal: 192.168.131.104,3260] Logging in to [iface: default, target: iqn.1984-05.com.dell:powervault.md3200i.6782bcb0006bd850000000004ed88b91, portal: 192.168.131.102,3260] Logging in to [iface: default, target: iqn.1984-05.com.dell:powervault.md3200i.6782bcb0006bd850000000004ed88b91, portal: 192.168.130.103,3260] Logging in to [iface: default, target: iqn.1984-05.com.dell:powervault.md3200i.6782bcb0006bd850000000004ed88b91, portal: 192.168.130.104,3260] Logging in to [iface: default, target: iqn.1984-05.com.dell:powervault.md3200i.6782bcb0006bd850000000004ed88b91, portal: 192.168.130.102,3260] Logging in to [iface: default, target: iqn.1984-05.com.dell:powervault.md3200i.6782bcb0006bd850000000004ed88b91, portal: 192.168.131.103,3260] Login to [iface: default, target: iqn.1984-05.com.dell:powervault.md3200i.6782bcb0006bd850000000004ed88b91, portal: 192.168.130.101,3260]: successful Login to [iface: default, target: iqn.1984-05.com.dell:powervault.md3200i.6782bcb0006bd850000000004ed88b91, portal: 192.168.131.101,3260]: successful Login to [iface: default, target: iqn.1984-05.com.dell:powervault.md3200i.6782bcb0006bd850000000004ed88b91, portal: 192.168.131.104,3260]: successful Login to [iface: default, target: iqn.1984-05.com.dell:powervault.md3200i.6782bcb0006bd850000000004ed88b91, portal: 192.168.131.102,3260]: successful Login to [iface: default, target: iqn.1984-05.com.dell:powervault.md3200i.6782bcb0006bd850000000004ed88b91, portal: 192.168.130.103,3260]: successful Login to [iface: default, target: iqn.1984-05.com.dell:powervault.md3200i.6782bcb0006bd850000000004ed88b91, portal: 192.168.130.104,3260]: successful Login to [iface: default, target: iqn.1984-05.com.dell:powervault.md3200i.6782bcb0006bd850000000004ed88b91, portal: 192.168.130.102,3260]: successful Login to [iface: default, target: iqn.1984-05.com.dell:powervault.md3200i.6782bcb0006bd850000000004ed88b91, portal: 192.168.131.103,3260]: successful [root@xen3 ~]# iscsiadm -m session tcp: [1] 192.168.130.101:3260,1 iqn.1984-05.com.dell:powervault.md3200i.6782bcb0006bd850000000004ed88b91 tcp: [2] 192.168.131.101:3260,1 iqn.1984-05.com.dell:powervault.md3200i.6782bcb0006bd850000000004ed88b91 tcp: [3] 192.168.131.104:3260,2 iqn.1984-05.com.dell:powervault.md3200i.6782bcb0006bd850000000004ed88b91 tcp: [4] 192.168.131.102:3260,2 iqn.1984-05.com.dell:powervault.md3200i.6782bcb0006bd850000000004ed88b91 tcp: [5] 192.168.130.103:3260,1 iqn.1984-05.com.dell:powervault.md3200i.6782bcb0006bd850000000004ed88b91 tcp: [6] 192.168.130.104:3260,2 iqn.1984-05.com.dell:powervault.md3200i.6782bcb0006bd850000000004ed88b91 tcp: [7] 192.168.130.102:3260,2 iqn.1984-05.com.dell:powervault.md3200i.6782bcb0006bd850000000004ed88b91 tcp: [8] 192.168.131.103:3260,1 iqn.1984-05.com.dell:powervault.md3200i.6782bcb0006bd850000000004ed88b91 [root@xen3 ~]# service multipathd restart ok Stopping multipathd daemon: [ OK ] Starting multipathd daemon: [ OK ] [root@xen3 ~]# multipath Jul 04 09:58:47 | DM multipath kernel driver not loaded Jul 04 09:58:47 | DM multipath kernel driver not loaded [root@xen3 ~]# multipath -ll Jul 04 09:59:03 | DM multipath kernel driver not loaded Jul 04 09:59:03 | DM multipath kernel driver not loaded [ root@xen3 ~]# modprobe dm_multipath [root@xen3 ~]# multipath Jul 04 10:19:50 | 36b8ca3a0e7024800194a0bd11891cd14: ignoring map create: 1Dell_Internal_Dual_SD_0123456789AB undef Dell,Internal Dual SD size=1.9G features='0' hwhandler='0' wp=undef `-+- policy='round-robin 0' prio=1 status=undef `- 7:0:0:0 sdb 8:16 undef ready running [root@xen3 ~]# multipath -ll 1Dell_Internal_Dual_SD_0123456789AB dm-1 Dell,Internal Dual SD size=1.9G features='0' hwhandler='0' wp=rw `-+- policy='round-robin 0' prio=1 status=enabled `- 7:0:0:0 sdb 8:16 active ready running [root@xen3 ~]# iscsiadm -m session tcp: [1] 192.168.130.101:3260,1 iqn.1984-05.com.dell:powervault.md3200i.6782bcb0006bd850000000004ed88b91 tcp: [2] 192.168.131.101:3260,1 iqn.1984-05.com.dell:powervault.md3200i.6782bcb0006bd850000000004ed88b91 tcp: [3] 192.168.131.104:3260,2 iqn.1984-05.com.dell:powervault.md3200i.6782bcb0006bd850000000004ed88b91 tcp: [4] 192.168.131.102:3260,2 iqn.1984-05.com.dell:powervault.md3200i.6782bcb0006bd850000000004ed88b91 tcp: [5] 192.168.130.103:3260,1 iqn.1984-05.com.dell:powervault.md3200i.6782bcb0006bd850000000004ed88b91 tcp: [6] 192.168.130.104:3260,2 iqn.1984-05.com.dell:powervault.md3200i.6782bcb0006bd850000000004ed88b91 tcp: [7] 192.168.130.102:3260,2 iqn.1984-05.com.dell:powervault.md3200i.6782bcb0006bd850000000004ed88b91 tcp: [8] 192.168.131.103:3260,1 iqn.1984-05.com.dell:powervault.md3200i.6782bcb0006bd850000000004ed88b91 [root@xen3 ~]# dmesg | tail -n 50 [ 1161.881010] sd 8:0:0:0: [sdf] Unhandled error code [ 1161.881013] sd 8:0:0:0: [sdf] Result: hostbyte=DID_TRANSPORT_DISRUPTED driverbyte=DRIVER_OK [ 1161.881017] sd 8:0:0:0: [sdf] CDB: Read(10): 28 00 00 00 00 00 00 00 08 00 [ 1161.881024] end_request: I/O error, dev sdf, sector 0 [ 1161.881031] Buffer I/O error on device sdf, logical block 0 [ 1161.881045] sd 15:0:0:0: [sdi] Unhandled error code [ 1161.881048] sd 15:0:0:0: [sdi] Result: hostbyte=DID_TRANSPORT_DISRUPTED driverbyte=DRIVER_OK [ 1161.881052] sd 15:0:0:0: [sdi] CDB: Read(10): 28 00 00 00 00 00 00 00 08 00 [ 1161.881058] end_request: I/O error, dev sdi, sector 0 [ 1161.881065] Buffer I/O error on device sdi, logical block 0 [ 1161.881122] sd 9:0:0:0: [sdg] Unhandled error code [ 1161.881124] sd 9:0:0:0: [sdg] Result: hostbyte=DID_TRANSPORT_DISRUPTED driverbyte=DRIVER_OK [ 1161.881126] sd 9:0:0:0: [sdg] CDB: Read(10): 28 00 00 00 00 00 00 00 08 00 [ 1161.881132] end_request: I/O error, dev sdg, sector 0 [ 1161.881140] Buffer I/O error on device sdg, logical block 0 [ 1168.220951] connection6:0: ping timeout of 15 secs expired, recv timeout 10, last rx 84060, last ping 85060, now 86560 [ 1168.220957] connection7:0: ping timeout of 15 secs expired, recv timeout 10, last rx 84060, last ping 85060, now 86560 [ 1168.220967] connection7:0: detected conn error (1011) [ 1168.220969] connection4:0: ping timeout of 15 secs expired, recv timeout 10, last rx 84060, last ping 85060, now 86560 [ 1168.220973] connection4:0: detected conn error (1011) [ 1168.220975] connection3:0: ping timeout of 15 secs expired, recv timeout 10, last rx 84060, last ping 85060, now 86560 [ 1168.220978] connection3:0: detected conn error (1011) [ 1168.220985] connection6:0: detected conn error (1011) [ 1168.480994] sd 14:0:0:0: [sde] Unhandled error code [ 1168.480998] sd 14:0:0:0: [sde] Result: hostbyte=DID_TRANSPORT_DISRUPTED driverbyte=DRIVER_OK [ 1168.481001] sd 14:0:0:0: [sde] CDB: Read(10): 28 00 00 00 00 00 00 00 08 00 [ 1168.481009] end_request: I/O error, dev sde, sector 0 [ 1168.481015] Buffer I/O error on device sde, logical block 0 [ 1168.481076] sd 11:0:0:0: [sdc] Unhandled error code [ 1168.481078] sd 11:0:0:0: [sdc] Result: hostbyte=DID_TRANSPORT_DISRUPTED driverbyte=DRIVER_OK [ 1168.481080] sd 11:0:0:0: [sdc] CDB: Read(10): 28 00 00 00 00 00 00 00 08 00 [ 1168.481087] end_request: I/O error, dev sdc, sector 0 [ 1168.481092] Buffer I/O error on device sdc, logical block 0 [ 1168.481144] sd 10:0:0:0: [sdd] Unhandled error code [ 1168.481147] sd 10:0:0:0: [sdd] Result: hostbyte=DID_TRANSPORT_DISRUPTED driverbyte=DRIVER_OK [ 1168.481150] sd 10:0:0:0: [sdd] CDB: Read(10): 28 00 00 00 00 00 00 00 08 00 [ 1168.481156] end_request: I/O error, dev sdd, sector 0 [ 1168.481163] Buffer I/O error on device sdd, logical block 0 [ 1168.481168] sd 13:0:0:0: [sdj] Unhandled error code [ 1168.481170] sd 13:0:0:0: [sdj] Result: hostbyte=DID_TRANSPORT_DISRUPTED driverbyte=DRIVER_OK [ 1168.481172] sd 13:0:0:0: [sdj] CDB: Read(10): 28 00 00 00 00 00 00 00 08 00 [ 1168.481178] end_request: I/O error, dev sdj, sector 0 [ 1168.481184] Buffer I/O error on device sdj, logical block 0 [ 1457.105996] device-mapper: multipath round-robin: version 1.0.0 loaded [ 1457.106155] device-mapper: multipath: Cannot access device path 8:0: -16 [ 1457.106164] device-mapper: table: 252:1: multipath: error getting device [ 1457.106172] device-mapper: ioctl: error adding target to table [ 1457.171292] device-mapper: multipath: Cannot access device path 8:0: -16 [ 1457.171299] device-mapper: table: 252:1: multipath: error getting device [ 1457.171304] device-mapper: ioctl: error adding target to table [root@xen3 ~]# fdisk -l Disk /dev/sda: 299.4 GB, 299439751168 bytes 255 heads, 63 sectors/track, 36404 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Device Boot Start End Blocks Id System /dev/sda1 1 5 40131 de Dell Utility /dev/sda2 * 6 528 4194304 83 Linux Partition 2 does not end on cylinder boundary. /dev/sda3 528 1050 4194304 83 Linux /dev/sda4 1050 36404 283986359+ 8e Linux LVM Disk /dev/sdb: 2040 MB, 2040528896 bytes 255 heads, 63 sectors/track, 248 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Device Boot Start End Blocks Id System /dev/sdb1 1 248 1992028+ 83 Linux Disk /dev/dm-1: 2040 MB, 2040528896 bytes 255 heads, 63 sectors/track, 248 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Device Boot Start End Blocks Id System /dev/dm-1p1 1 248 1992028+ 83 Linux [root@xen3 ~]# xe sr-probe type=lvmoiscsi device-config:target=192.168.130.101 device-config:targetIQN=iqn.1984-05.com.dell:powervault.md3200i.6782bcb0006bd850000000004ed88b91 Error code: SR_BACKEND_FAILURE_107 Error parameters: , The SCSIid parameter is missing or incorrect, <?xml version="1.0" ?> <iscsi-target/> Note: the xml ends there correctly on the last line - it doesn't ever return a list of LUNs (and there is one in the group on the SAN for those servers.

Read the article

Windows Server 2008 R2 network adapter stops working, requires hard reboot

- by Geoff Dalgas

TL;DR version: Turns out this was a Windows Server 2008 R2 kernel networking bug. After siccing Microsoft support on it, we (eventually) got an unpublished kernel hotfix from Microsoft to address it. If you, too, are experiencing mysterious low-level network driver failures requiring a reboot/bluescreen cycle, you might want that hotfix (or maybe Service Pack 1 whenever it is released, too.) We have been using HAProxy along with heartbeat from the Linux-HA project. We are using two linux instances to provide a failover. Each server has with their own public IP and a single IP which is shared between the two using a virtual interface (eth1:1) at IP: 69.59.196.211 The virtual interface (eth1:1) IP 69.59.196.211 is configured as the gateway for the windows servers behind them and we use ip_forwarding to route traffic. We are experiencing an occasional network outage on one of our windows servers behind our linux gateways. HAProxy will detect the server is offline which we can verify by remoting to the failed server and attempting to ping the gateway: Pinging 69.59.196.211 with 32 bytes of data: Reply from 69.59.196.220: Destination host unreachable. Running arp -a on this failed server shows that there is no entry for the gateway address (69.59.196.211): Interface: 69.59.196.220 --- 0xa Internet Address Physical Address Type 69.59.196.161 00-26-88-63-c7-80 dynamic 69.59.196.210 00-15-5d-0a-3e-0e dynamic 69.59.196.212 00-21-5e-4d-45-c9 dynamic 69.59.196.213 00-15-5d-00-b2-0d dynamic 69.59.196.215 00-21-5e-4d-61-1a dynamic 69.59.196.217 00-21-5e-4d-2c-e8 dynamic 69.59.196.219 00-21-5e-4d-38-e5 dynamic 69.59.196.221 00-15-5d-00-b2-0d dynamic 69.59.196.222 00-15-5d-0a-3e-09 dynamic 69.59.196.223 ff-ff-ff-ff-ff-ff static 224.0.0.22 01-00-5e-00-00-16 static 224.0.0.252 01-00-5e-00-00-fc static 225.0.0.1 01-00-5e-00-00-01 static On our linux gateway instances arp -a shows: peak-colo-196-220.peak.org (69.59.196.220) at <incomplete> on eth1 stackoverflow.com (69.59.196.212) at 00:21:5e:4d:45:c9 [ether] on eth1 peak-colo-196-215.peak.org (69.59.196.215) at 00:21:5e:4d:61:1a [ether] on eth1 peak-colo-196-219.peak.org (69.59.196.219) at 00:21:5e:4d:38:e5 [ether] on eth1 peak-colo-196-222.peak.org (69.59.196.222) at 00:15:5d:0a:3e:09 [ether] on eth1 peak-colo-196-209.peak.org (69.59.196.209) at 00:26:88:63:c7:80 [ether] on eth1 peak-colo-196-217.peak.org (69.59.196.217) at 00:21:5e:4d:2c:e8 [ether] on eth1 Why would arp occasionally set the entry for this failed server as <incomplete>? Should we be defining our arp entries statically? I've always left arp alone since it works 99% of the time, but in this one instance it appears to be failing. Are there any additional troubleshooting steps we can take help resolve this issue? THINGS WE HAVE TRIED I added a static arp entry for testing on one of the linux gateways which still didn't help. root@haproxy2:~# arp -a peak-colo-196-215.peak.org (69.59.196.215) at 00:21:5e:4d:61:1a [ether] on eth1 peak-colo-196-221.peak.org (69.59.196.221) at 00:15:5d:00:b2:0d [ether] on eth1 stackoverflow.com (69.59.196.212) at 00:21:5e:4d:45:c9 [ether] on eth1 peak-colo-196-219.peak.org (69.59.196.219) at 00:21:5e:4d:38:e5 [ether] on eth1 peak-colo-196-209.peak.org (69.59.196.209) at 00:26:88:63:c7:80 [ether] on eth1 peak-colo-196-217.peak.org (69.59.196.217) at 00:21:5e:4d:2c:e8 [ether] on eth1 peak-colo-196-220.peak.org (69.59.196.220) at 00:21:5e:4d:30:8d [ether] PERM on eth1 root@haproxy2:~# arp -i eth1 -s 69.59.196.220 00:21:5e:4d:30:8d root@haproxy2:~# ping 69.59.196.220 PING 69.59.196.220 (69.59.196.220) 56(84) bytes of data. --- 69.59.196.220 ping statistics --- 7 packets transmitted, 0 received, 100% packet loss, time 6006ms Rebooting the windows web server solves this issue temporarily with no other changes to the network but our experience shows this issue will come back. Swapping network cards and switches I noticed the link light on the port of the switch for the failed windows server was running at 100Mb instead of 1Gb on the failed interface. I moved the cable to several other open ports and the link indicated 100Mb for each port that I tried. I also swapped the cable with the same result. I tried changing the properties of the network card in windows and the server locked up and required a hard reset after clicking apply. This windows server has two physical network interfaces so I have swapped the cables and network settings on the two interfaces to see if the problem follows the interface. If the public interface goes down again we will know that it is not an issue with the network card. (We also tried another switch we have on hand, no change) Changing network hardware driver versions We've had the same problem with the latest Broadcom driver, as well as the built-in driver that ships in Windows Server 2008 R2. Replacing network cables As a last ditch effort we remembered another change that occurred was the replacement of all of the patch cords between our servers / switch. We had purchased two sets, one green of lengths 1ft - 3ft for the private interfaces and another set of red cables for the public interfaces. We swapped out all of the public interface patch cables with a different brand and ran our servers without issue for a full week ... aaaaaand then the problem recurred. Disable checksum offload, remove TProxy We also tried disabling TCP/IP checksum offload in the driver, no change. We're now pulling out TProxy and moving to a more traditional x-forwarded-for network arrangement without any fancy IP address rewriting. We'll see if that helps. Switch Virtualization providers On the off chance this was related to Hyper-V in some way (we do host Linux VMs on it), we switched to VMWare Server. No change. Switch host model We've reached the end of our troubleshooting rope and are now formally involving Microsoft support. They recommended changing the host model: http://en.wikipedia.org/wiki/Host_model http://technet.microsoft.com/en-us/magazine/2007.09.cableguy.aspx We did that, and.. we'll see.

Read the article

Hibernate unable to instantiate default tuplizer - cannot find getter

- by ZeldaPinwheel

I'm trying to use Hibernate to persist a class that looks like this: public class Item implements Serializable, Comparable<Item> { // Item id private Integer id; // Description of item in inventory private String description; // Number of items described by this inventory item private int count; //Category item belongs to private String category; // Date item was purchased private GregorianCalendar purchaseDate; public Item() { } public Integer getId() { return id; } public void setId(Integer id) { this.id = id; } public String getDescription() { return description; } public void setDescription(String description) { this.description = description; } public int getCount() { return count; } public void setCount(int count) { this.count = count; } public String getCategory() { return category; } public void setCategory(String category) { this.category = category; } public GregorianCalendar getPurchaseDate() { return purchaseDate; } public void setPurchasedate(GregorianCalendar purchaseDate) { this.purchaseDate = purchaseDate; } My Hibernate mapping file contains the following: <property name="puchaseDate" type="java.util.GregorianCalendar"> <column name="purchase_date"></column> </property> When I try to run, I get error messages indicating there is no getter function for the purchaseDate attribute: 577 [main] INFO org.hibernate.connection.DriverManagerConnectionProvider - Using Hibernate built-in connection pool (not for production use!) 577 [main] INFO org.hibernate.connection.DriverManagerConnectionProvider - Hibernate connection pool size: 20 577 [main] INFO org.hibernate.connection.DriverManagerConnectionProvider - autocommit mode: false 592 [main] INFO org.hibernate.connection.DriverManagerConnectionProvider - using driver: com.mysql.jdbc.Driver at URL: jdbc:mysql://localhost:3306/home_inventory 592 [main] INFO org.hibernate.connection.DriverManagerConnectionProvider - connection properties: {user=root, password=****} 1078 [main] INFO org.hibernate.cfg.SettingsFactory - RDBMS: MySQL, version: 5.1.45 1078 [main] INFO org.hibernate.cfg.SettingsFactory - JDBC driver: MySQL-AB JDBC Driver, version: mysql-connector-java-5.1.12 ( Revision: ${bzr.revision-id} ) 1103 [main] INFO org.hibernate.dialect.Dialect - Using dialect: org.hibernate.dialect.MySQLDialect 1107 [main] INFO org.hibernate.engine.jdbc.JdbcSupportLoader - Disabling contextual LOB creation as JDBC driver reported JDBC version [3] less than 4 1109 [main] INFO org.hibernate.transaction.TransactionFactoryFactory - Using default transaction strategy (direct JDBC transactions) 1110 [main] INFO org.hibernate.transaction.TransactionManagerLookupFactory - No TransactionManagerLookup configured (in JTA environment, use of read-write or transactional second-level cache is not recommended) 1110 [main] INFO org.hibernate.cfg.SettingsFactory - Automatic flush during beforeCompletion(): disabled 1110 [main] INFO org.hibernate.cfg.SettingsFactory - Automatic session close at end of transaction: disabled 1110 [main] INFO org.hibernate.cfg.SettingsFactory - JDBC batch size: 15 1110 [main] INFO org.hibernate.cfg.SettingsFactory - JDBC batch updates for versioned data: disabled 1111 [main] INFO org.hibernate.cfg.SettingsFactory - Scrollable result sets: enabled 1111 [main] INFO org.hibernate.cfg.SettingsFactory - JDBC3 getGeneratedKeys(): enabled 1111 [main] INFO org.hibernate.cfg.SettingsFactory - Connection release mode: auto 1111 [main] INFO org.hibernate.cfg.SettingsFactory - Maximum outer join fetch depth: 2 1111 [main] INFO org.hibernate.cfg.SettingsFactory - Default batch fetch size: 1 1111 [main] INFO org.hibernate.cfg.SettingsFactory - Generate SQL with comments: disabled 1111 [main] INFO org.hibernate.cfg.SettingsFactory - Order SQL updates by primary key: disabled 1111 [main] INFO org.hibernate.cfg.SettingsFactory - Order SQL inserts for batching: disabled 1112 [main] INFO org.hibernate.cfg.SettingsFactory - Query translator: org.hibernate.hql.ast.ASTQueryTranslatorFactory 1113 [main] INFO org.hibernate.hql.ast.ASTQueryTranslatorFactory - Using ASTQueryTranslatorFactory 1113 [main] INFO org.hibernate.cfg.SettingsFactory - Query language substitutions: {} 1113 [main] INFO org.hibernate.cfg.SettingsFactory - JPA-QL strict compliance: disabled 1113 [main] INFO org.hibernate.cfg.SettingsFactory - Second-level cache: enabled 1113 [main] INFO org.hibernate.cfg.SettingsFactory - Query cache: disabled 1113 [main] INFO org.hibernate.cfg.SettingsFactory - Cache region factory : org.hibernate.cache.impl.NoCachingRegionFactory 1113 [main] INFO org.hibernate.cfg.SettingsFactory - Optimize cache for minimal puts: disabled 1114 [main] INFO org.hibernate.cfg.SettingsFactory - Structured second-level cache entries: disabled 1117 [main] INFO org.hibernate.cfg.SettingsFactory - Echoing all SQL to stdout 1118 [main] INFO org.hibernate.cfg.SettingsFactory - Statistics: disabled 1118 [main] INFO org.hibernate.cfg.SettingsFactory - Deleted entity synthetic identifier rollback: disabled 1118 [main] INFO org.hibernate.cfg.SettingsFactory - Default entity-mode: pojo 1118 [main] INFO org.hibernate.cfg.SettingsFactory - Named query checking : enabled 1118 [main] INFO org.hibernate.cfg.SettingsFactory - Check Nullability in Core (should be disabled when Bean Validation is on): enabled 1151 [main] INFO org.hibernate.impl.SessionFactoryImpl - building session factory org.hibernate.HibernateException: Unable to instantiate default tuplizer [org.hibernate.tuple.entity.PojoEntityTuplizer] at org.hibernate.tuple.entity.EntityTuplizerFactory.constructTuplizer(EntityTuplizerFactory.java:110) at org.hibernate.tuple.entity.EntityTuplizerFactory.constructDefaultTuplizer(EntityTuplizerFactory.java:135) at org.hibernate.tuple.entity.EntityEntityModeToTuplizerMapping.<init>(EntityEntityModeToTuplizerMapping.java:80) at org.hibernate.tuple.entity.EntityMetamodel.<init>(EntityMetamodel.java:323) at org.hibernate.persister.entity.AbstractEntityPersister.<init>(AbstractEntityPersister.java:475) at org.hibernate.persister.entity.SingleTableEntityPersister.<init>(SingleTableEntityPersister.java:133) at org.hibernate.persister.PersisterFactory.createClassPersister(PersisterFactory.java:84) at org.hibernate.impl.SessionFactoryImpl.<init>(SessionFactoryImpl.java:295) at org.hibernate.cfg.Configuration.buildSessionFactory(Configuration.java:1385) at service.HibernateSessionFactory.currentSession(HibernateSessionFactory.java:53) at service.ItemSvcHibImpl.generateReport(ItemSvcHibImpl.java:78) at service.test.ItemSvcTest.testGenerateReport(ItemSvcTest.java:226) at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method) at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25) at java.lang.reflect.Method.invoke(Method.java:597) at junit.framework.TestCase.runTest(TestCase.java:164) at junit.framework.TestCase.runBare(TestCase.java:130) at junit.framework.TestResult$1.protect(TestResult.java:106) at junit.framework.TestResult.runProtected(TestResult.java:124) at junit.framework.TestResult.run(TestResult.java:109) at junit.framework.TestCase.run(TestCase.java:120) at junit.framework.TestSuite.runTest(TestSuite.java:230) at junit.framework.TestSuite.run(TestSuite.java:225) at org.eclipse.jdt.internal.junit.runner.junit3.JUnit3TestReference.run(JUnit3TestReference.java:130) at org.eclipse.jdt.internal.junit.runner.TestExecution.run(TestExecution.java:38) at org.eclipse.jdt.internal.junit.runner.RemoteTestRunner.runTests(RemoteTestRunner.java:467) at org.eclipse.jdt.internal.junit.runner.RemoteTestRunner.runTests(RemoteTestRunner.java:683) at org.eclipse.jdt.internal.junit.runner.RemoteTestRunner.run(RemoteTestRunner.java:390) at org.eclipse.jdt.internal.junit.runner.RemoteTestRunner.main(RemoteTestRunner.java:197) Caused by: java.lang.reflect.InvocationTargetException at sun.reflect.NativeConstructorAccessorImpl.newInstance0(Native Method) at sun.reflect.NativeConstructorAccessorImpl.newInstance(NativeConstructorAccessorImpl.java:39) at sun.reflect.DelegatingConstructorAccessorImpl.newInstance(DelegatingConstructorAccessorImpl.java:27) at java.lang.reflect.Constructor.newInstance(Constructor.java:513) at org.hibernate.tuple.entity.EntityTuplizerFactory.constructTuplizer(EntityTuplizerFactory.java:107) ... 29 more Caused by: org.hibernate.PropertyNotFoundException: Could not find a getter for puchaseDate in class domain.Item at org.hibernate.property.BasicPropertyAccessor.createGetter(BasicPropertyAccessor.java:328) at org.hibernate.property.BasicPropertyAccessor.getGetter(BasicPropertyAccessor.java:321) at org.hibernate.mapping.Property.getGetter(Property.java:304) at org.hibernate.tuple.entity.PojoEntityTuplizer.buildPropertyGetter(PojoEntityTuplizer.java:299) at org.hibernate.tuple.entity.AbstractEntityTuplizer.<init>(AbstractEntityTuplizer.java:158) at org.hibernate.tuple.entity.PojoEntityTuplizer.<init>(PojoEntityTuplizer.java:77) ... 34 more I'm new to Hibernate, so I don't know all the ins and outs, but I do have the getter and setter for the purchaseDate attribute. I don't know what I'm missing here - does anyone else? Thanks!

Read the article

How to change the value of a JLabel in runtime?

- by user365465

I want to change the image a JLabel is viewing during runtime, but I keep getting NullPointerExceptions or nothing happens when I press the magic button that's supposed to do things. Is it even possible in Java? Here is my code in its entirety: import java.text.*; import javax.swing.text.*; import java.util.*; import java.awt.*; import java.awt.event.*; import javax.swing.*; import javax.swing.event.*; public class Shell implements ActionListener, MenuKeyListener { JFrame frame; JWindow window; JButton PSubmit; JPanel pane1, pane2; JRadioButton R1, R2, R3; ButtonGroup PGroup; JTabbedPane layout; String result; String border = "Border.png"; String DF = "Frame.png"; String list []; Driver driver; public Shell() { driver = new Driver(); list = new String [6]; } public void setFrame() { frame = new JFrame("Pokemon Program 3 by Systems Ready"); frame.setSize(600, 600); frame.setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE); frame.setVisible(true); frame.getContentPane().setLayout(new BorderLayout()); } public void frameLayout() { layout = new JTabbedPane(); JPanel pane1 = new JPanel(); JPanel pane2 = new JPanel(); JLabel label = new JLabel("Please choose the restrictions:"); JLabel imgLabel1 = new JLabel(new ImageIcon(border)); JLabel notiLabel1 = new JLabel("The Pokemon chosen with these restrictions are: "); JLabel notiLabel2 = new JLabel("'No Restrictions': No restrictions for the kind of Pokemon chosen based on species or items."); JLabel notiLabel3 = new JLabel("'Battle Revolution': All Pokemon must have unique items."); JLabel notiLabel4 = new JLabel("'Battle Tower': All Pokemon must have unique items, Uber and Event Legendaries banned."); JLabel label2 = new JLabel("Please choose possible Pokemon:"); pane1.add(label); pearlButtons(); pane1.add(R1); pane1.add(R2); pane1.add(R3); pane1.add(PSubmit); pane1.add(notiLabel2); pane1.add(notiLabel3); pane1.add(notiLabel4); pane1.add(imgLabel1); pane1.add(notiLabel1); JLabel pokeLabel1 = new JLabel(new ImageIcon(DF)); JLabel pokeLabel2 = new JLabel(new ImageIcon(DF)); JLabel pokeLabel3 = new JLabel(new ImageIcon(DF)); JLabel pokeLabel4 = new JLabel(new ImageIcon(DF)); JLabel pokeLabel5 = new JLabel(new ImageIcon(DF)); JLabel pokeLabel6 = new JLabel(new ImageIcon(DF)); pane1.add(pokeLabel1); pane1.add(pokeLabel2); pane1.add(pokeLabel3); pane1.add(pokeLabel4); pane1.add(pokeLabel5); pane1.add(pokeLabel6); pane2.add(label2); layout.add("Pearl Version", pane1); layout.add("SoulSilver Version", pane2); frame.add(layout); } public void pearlButtons() { PGroup = new ButtonGroup(); R1 = new JRadioButton("No Restrictions", true); R1.setActionCommand("N"); R1.setVisible(true); R2 = new JRadioButton("Battle Revolution"); R2.setActionCommand("BR"); R2.setVisible(true); R3 = new JRadioButton("Battle Tower"); R3.setActionCommand("B"); R3.setVisible(true); PGroup.add(R1); PGroup.add(R2); PGroup.add(R3); PSubmit = new JButton("Submit"); PSubmit.setActionCommand("pstart"); PSubmit.setVisible(true); PSubmit.addActionListener(this); } public void pearlProcessing() { //The "list" array has a bunch of string names that get .png affixed to them (and I named the image files as such when I name them) String file1 = list[0] + ".png"; String file2 = list[1] + ".png"; String file3 = list[2] + ".png"; String file4 = list[3] + ".png"; String file5 = list[4] + ".png"; String file6 = list[5] + ".png"; /*-------------------------------------------------------------------------------// This is where the method's supposed to go to change the image... I've tried pokeLabel = new JLabel(new ImageIcon(file1));, but that yields a NullPointerException. //-----------------------------------------------------------------------------------*/ } public static void main(String[] args) { Shell test = new Shell(); test.setFrame(); test.frameLayout(); test.frame.setVisible(true); } public void actionPerformed(ActionEvent e) { if ("pstart".equals(e.getActionCommand())) { result = PGroup.getSelection().getActionCommand(); if (result.equals("N")) { list = driver.Prandom(); pearlProcessing(); } else System.out.println("Not done yet! ;)"); } } public void menuKeyPressed(MenuKeyEvent e) { System.out.println("pressed"); } public void menuKeyReleased(MenuKeyEvent e) { System.out.println("menuKeyReleased"); } public void menuKeyTyped(MenuKeyEvent e) { System.out.println("menuKeyTyped"); } }

Read the article

Dell Studio 1737 Overheating

- by Sean

I am using a Dell Studio 1737 laptop. I have been running Linux and have ran Windows recently for a very long time. I upgraded to the 10.10 distribution and since that distro, it seems that for some reason all Linuxes want to push my laptop to extremes. I have recently upgraded to Ubuntu 12.04 since I heart that it contains kernel fixes for overheating issues. 12.04 will actually eventually cool the system, but that is after the fans run to the point it sounds like a jet aircraft taking off and the laptop makes my hands sweat. In trying to combat the heat problems I have done the following: I installed the propriatery driver for my ATI Mobility HD 3600. I have tried both the one in the Additional Drivers and also tried ATI's latest greatest version. If I don't install this my laptop will overheat and shut off in minutes. Both seem to perform similarly, but the heat problem remains. I have tried limiting the CPU by installing the CPUFreq Indicator. This does help keep the machine from shutting off, but the heat is still uncomfortable to be around the machine. I usually run in power saver mode or run the cpu at 1.6 GHZ just to error on safety. I ran sensors-detect and here are the results: sean@sean-Studio-1737:~$ sudo sensors-detect # sensors-detect revision 5984 (2011-07-10 21:22:53 +0200) # System: Dell Inc. Studio 1737 (laptop) # Board: Dell Inc. 0F237N This program will help you determine which kernel modules you need to load to use lm_sensors most effectively. It is generally safe and recommended to accept the default answers to all questions, unless you know what you're doing. Some south bridges, CPUs or memory controllers contain embedded sensors. Do you want to scan for them? This is totally safe. (YES/no): y Module cpuid loaded successfully. Silicon Integrated Systems SIS5595... No VIA VT82C686 Integrated Sensors... No VIA VT8231 Integrated Sensors... No AMD K8 thermal sensors... No AMD Family 10h thermal sensors... No AMD Family 11h thermal sensors... No AMD Family 12h and 14h thermal sensors... No AMD Family 15h thermal sensors... No AMD Family 15h power sensors... No Intel digital thermal sensor... Success! (driver `coretemp') Intel AMB FB-DIMM thermal sensor... No VIA C7 thermal sensor... No VIA Nano thermal sensor... No Some Super I/O chips contain embedded sensors. We have to write to standard I/O ports to probe them. This is usually safe. Do you want to scan for Super I/O sensors? (YES/no): y Probing for Super-I/O at 0x2e/0x2f Trying family `National Semiconductor/ITE'... No Trying family `SMSC'... No Trying family `VIA/Winbond/Nuvoton/Fintek'... No Trying family `ITE'... No Probing for Super-I/O at 0x4e/0x4f Trying family `National Semiconductor/ITE'... Yes Found `ITE IT8512E/F/G Super IO' (but not activated) Some hardware monitoring chips are accessible through the ISA I/O ports. We have to write to arbitrary I/O ports to probe them. This is usually safe though. Yes, you do have ISA I/O ports even if you do not have any ISA slots! Do you want to scan the ISA I/O ports? (YES/no): y Probing for `National Semiconductor LM78' at 0x290... No Probing for `National Semiconductor LM79' at 0x290... No Probing for `Winbond W83781D' at 0x290... No Probing for `Winbond W83782D' at 0x290... No Lastly, we can probe the I2C/SMBus adapters for connected hardware monitoring devices. This is the most risky part, and while it works reasonably well on most systems, it has been reported to cause trouble on some systems. Do you want to probe the I2C/SMBus adapters now? (YES/no): y Using driver `i2c-i801' for device 0000:00:1f.3: Intel ICH9 Module i2c-i801 loaded successfully. Module i2c-dev loaded successfully. Now follows a summary of the probes I have just done. Just press ENTER to continue: Driver `coretemp': * Chip `Intel digital thermal sensor' (confidence: 9) To load everything that is needed, add this to /etc/modules: #----cut here---- # Chip drivers coretemp #----cut here---- If you have some drivers built into your kernel, the list above will contain too many modules. Skip the appropriate ones! Do you want to add these lines automatically to /etc/modules? (yes/NO)y Successful! Monitoring programs won't work until the needed modules are loaded. You may want to run 'service module-init-tools start' to load them. Unloading i2c-dev... OK Unloading i2c-i801... OK Unloading cpuid... OK sean@sean-Studio-1737:~$ sudo service module-init-tools start module-init-tools stop/waiting I also tried installing i8k but that didn't work since it didn't seem to be able to communicate with the hardware (probably for different kind of device). Also I ran acpi -V and here are the results: Battery 0: Full, 100% Battery 0: design capacity 613 mAh, last full capacity 260 mAh = 42% Adapter 0: on-line Thermal 0: ok, 49.0 degrees C Thermal 0: trip point 0 switches to mode critical at temperature 100.0 degrees C Thermal 1: ok, 48.0 degrees C Thermal 1: trip point 0 switches to mode critical at temperature 100.0 degrees C Thermal 2: ok, 51.0 degrees C Thermal 2: trip point 0 switches to mode critical at temperature 100.0 degrees C Cooling 0: LCD 0 of 15 Cooling 1: Processor 0 of 10 Cooling 2: Processor 0 of 10 I have hit a wall and don't know what to do now. Any advice is appreciated.

Read the article

How to Identify Which Hardware Component is Failing in Your Computer

- by Chris Hoffman

Concluding that your computer has a hardware problem is just the first step. If you’re dealing with a hardware issue and not a software issue, the next step is determining what hardware problem you’re actually dealing with. If you purchased a laptop or pre-built desktop PC and it’s still under warranty, you don’t need to care about this. Have the manufacturer fix the PC for you — figuring it out is their problem. If you’ve built your own PC or you want to fix a computer that’s out of warranty, this is something you’ll need to do on your own. Blue Screen 101: Search for the Error Message This may seem like obvious advice, but searching for information about a blue screen’s error message can help immensely. Most blue screens of death you’ll encounter on modern versions of Windows will likely be caused by hardware failures. The blue screen of death often displays information about the driver that crashed or the type of error it encountered. For example, let’s say you encounter a blue screen that identified “NV4_disp.dll” as the driver that caused the blue screen. A quick Google search will reveal that this is the driver for NVIDIA graphics cards, so you now have somewhere to start. It’s possible that your graphics card is failing if you encounter such an error message. Check Hard Drive SMART Status Hard drives have a built in S.M.A.R.T. (Self-Monitoring, Analysis, and Reporting Technology) feature. The idea is that the hard drive monitors itself and will notice if it starts to fail, providing you with some advance notice before the drive fails completely. This isn’t perfect, so your hard drive may fail even if SMART says everything is okay. If you see any sort of “SMART error” message, your hard drive is failing. You can use SMART analysis tools to view the SMART health status information your hard drives are reporting. Test Your RAM RAM failure can result in a variety of problems. If the computer writes data to RAM and the RAM returns different data because it’s malfunctioning, you may see application crashes, blue screens, and file system corruption. To test your memory and see if it’s working properly, use Windows’ built-in Memory Diagnostic tool. The Memory Diagnostic tool will write data to every sector of your RAM and read it back afterwards, ensuring that all your RAM is working properly. Check Heat Levels How hot is is inside your computer? Overheating can rsult in blue screens, crashes, and abrupt shut downs. Your computer may be overheating because you’re in a very hot location, it’s ventilated poorly, a fan has stopped inside your computer, or it’s full of dust. Your computer monitors its own internal temperatures and you can access this information. It’s generally available in your computer’s BIOS, but you can also view it with system information utilities such as SpeedFan or Speccy. Check your computer’s recommended temperature level and ensure it’s within the appropriate range. If your computer is overheating, you may see problems only when you’re doing something demanding, such as playing a game that stresses your CPU and graphics card. Be sure to keep an eye on how hot your computer gets when it performs these demanding tasks, not only when it’s idle. Stress Test Your CPU You can use a utility like Prime95 to stress test your CPU. Such a utility will fore your computer’s CPU to perform calculations without allowing it to rest, working it hard and generating heat. If your CPU is becoming too hot, you’ll start to see errors or system crashes. Overclockers use Prime95 to stress test their overclock settings — if Prime95 experiences errors, they throttle back on their overclocks to ensure the CPU runs cooler and more stable. It’s a good way to check if your CPU is stable under load. Stress Test Your Graphics Card Your graphics card can also be stress tested. For example, if your graphics driver crashes while playing games, the games themselves crash, or you see odd graphical corruption, you can run a graphics benchmark utility like 3DMark. The benchmark will stress your graphics card and, if it’s overheating or failing under load, you’ll see graphical problems, crashes, or blue screens while running the benchmark. If the benchmark seems to work fine but you have issues playing a certain game, it may just be a problem with that game. Swap it Out Not every hardware problem is easy to diagnose. If you have a bad motherboard or power supply, their problems may only manifest through occasional odd issues with other components. It’s hard to tell if these components are causing problems unless you replace them completely. Ultimately, the best way to determine whether a component is faulty is to swap it out. For example, if you think your graphics card may be causing your computer to blue screen, pull the graphics card out of your computer and swap in a new graphics card. If everything is working well, it’s likely that your previous graphics card was bad. This isn’t easy for people who don’t have boxes of components sitting around, but it’s the ideal way to troubleshoot. Troubleshooting is all about trial and error, and swapping components out allows you to pin down which component is actually causing the problem through a process of elimination. This isn’t a complete guide to everything that could likely go wrong and how to identify it — someone could write a full textbook on identifying failing components and still not cover everything. But the tips above should give you some places to start dealing with the more common problems. Image Credit: Justin Marty on Flickr

Read the article

Vlc And other Multi Media Problems

- by MrMagu

ive tried numerous Free Multimedia Programs on ubuntu and i get the same result when i go to watch one of my movies off my other hardrive it allways ends up full screening with a stuck image in the middle and vlc ends up looking pitch black. ive look all over the web for this issue im wondering if anyone is experinceing the same problems I Dont know if it has to do with the duel monitors ive tried adding and re adding the repositorys but it seems to be doing the same repetive thing for over a month now do i need to reinstall the whole system or what idk anyhelp please would be much appreciated Ty MrMagu Xorg Conf File nvidia-settings: X configuration file generated by nvidia-settings nvidia-settings: version 304.37 (buildd@allspice) Sun Sep 9 05:59:26 UTC 2012 Section "ServerLayout" Identifier "Layout0" Screen 0 "Screen0" 0 0 InputDevice "Keyboard0" "CoreKeyboard" InputDevice "Mouse0" "CorePointer" Option "Xinerama" "0" EndSection Section "Files" EndSection Section "InputDevice" # generated from default Identifier "Mouse0" Driver "mouse" Option "Protocol" "auto" Option "Device" "/dev/psaux" Option "Emulate3Buttons" "no" Option "ZAxisMapping" "4 5" EndSection Section "InputDevice" # generated from default Identifier "Keyboard0" Driver "kbd" EndSection Section "Monitor" # HorizSync source: edid, VertRefresh source: edid Identifier "Monitor0" VendorName "Unknown" ModelName "Ancor Communications Inc VE247" HorizSync 30.0 - 83.0 VertRefresh 50.0 - 76.0 Option "DPMS" EndSection Section "Monitor" Identifier "Monitor1" VendorName "Unknown" ModelName "Ancor Communications Inc VE247" HorizSync 30.0 - 83.0 VertRefresh 50.0 - 76.0 EndSection Section "Device" Identifier "Device0" Driver "nvidia" VendorName "NVIDIA Corporation" BoardName "Quadro FX 1500" EndSection Section "Device" Identifier "Device1" Driver "nvidia" VendorName "NVIDIA Corporation" BoardName "Quadro FX 1500" BusID "PCI:1:0:0" Screen 1 EndSection Section "Screen" Removed Option "metamodes" "DFP-0: nvidia-auto-select +0+0, DFP-1: nvidia-auto-select +1920+0; DFP-0: 1920x1080 +0+0, DFP-1: 1920x1080 +1920+0" Removed Option "metamodes" "DFP-0: nvidia-auto-select +0+0; DFP-0: 1920x1080 +0+0; DFP-0: 1920x1080_60 +0+0; DFP-0: 1680x1050 +0+0; DFP-0: 1680x1050_60 +0+0; DFP-0: 1440x900 +0+0; DFP-0: 1440x900_60 +0+0; DFP-0: 1280x1024 +0+0; DFP-0: 1280x1024_75 +0+0; DFP-0: 1280x1024_60 +0+0; DFP-0: 1280x960 +0+0; DFP-0: 1280x960_60 +0+0; DFP-0: 1152x864 +0+0; DFP-0: 1152x864_75 +0+0; DFP-0: 1024x768 +0+0; DFP-0: 1024x768_75 +0+0; DFP-0: 1024x768_70 +0+0; DFP-0: 1024x768_60 +0+0; DFP-0: 800x600 +0+0; DFP-0: 800x600_75 +0+0; DFP-0: 800x600_72 +0+0; DFP-0: 800x600_60 +0+0; DFP-0: 800x600_56 +0+0; DFP-0: 640x480 +0+0; DFP-0: 640x480_75 +0+0; DFP-0: 640x480_72 +0+0; DFP-0: 640x480_60 +0+0; DFP-0: nvidia-auto-select @1920x720 +0+0" Removed Option "metamodes" "DFP-0: nvidia-auto-select +0+0; DFP-0: 1920x1080 +0+0; DFP-0: 1920x1080_60 +0+0; DFP-0: 1680x1050 +0+0; DFP-0: 1680x1050_60 +0+0; DFP-0: 1440x900 +0+0; DFP-0: 1440x900_60 +0+0; DFP-0: 1280x1024 +0+0; DFP-0: 1280x1024_75 +0+0; DFP-0: 1280x1024_60 +0+0; DFP-0: 1280x960 +0+0; DFP-0: 1280x960_60 +0+0; DFP-0: 1152x864 +0+0; DFP-0: 1152x864_75 +0+0; DFP-0: 1024x768 +0+0; DFP-0: 1024x768_75 +0+0; DFP-0: 1024x768_70 +0+0; DFP-0: 1024x768_60 +0+0; DFP-0: 800x600 +0+0; DFP-0: 800x600_75 +0+0; DFP-0: 800x600_72 +0+0; DFP-0: 800x600_60 +0+0; DFP-0: 800x600_56 +0+0; DFP-0: 640x480 +0+0; DFP-0: 640x480_75 +0+0; DFP-0: 640x480_72 +0+0; DFP-0: 640x480_60 +0+0" Identifier "Screen0" Device "Device0" Monitor "Monitor0" DefaultDepth 24 Option "TwinView" "1" Option "TwinViewXineramaInfoOrder" "DFP-0" Option "Stereo" "0" Option "nvidiaXineramaInfoOrder" "DFP-0" Option "metamodes" "DFP-0: nvidia-auto-select +0+0, DFP-1: 1920x1080 +1920+0; DFP-0: 1920x1080 +0+0, DFP-1: nvidia-auto-select +1920+0; DFP-0: 1920x1080_60 +0+0; DFP-0: 1680x1050 +0+0; DFP-0: 1680x1050_60 +0+0; DFP-0: 1440x900 +0+0; DFP-0: 1440x900_60 +0+0; DFP-0: 1280x1024 +0+0; DFP-0: 1280x1024_75 +0+0; DFP-0: 1280x1024_60 +0+0; DFP-0: 1280x960 +0+0; DFP-0: 1280x960_60 +0+0; DFP-0: 1152x864 +0+0; DFP-0: 1152x864_75 +0+0; DFP-0: 1024x768 +0+0; DFP-0: 1024x768_75 +0+0; DFP-0: 1024x768_70 +0+0; DFP-0: 1024x768_60 +0+0; DFP-0: 800x600 +0+0; DFP-0: 800x600_75 +0+0; DFP-0: 800x600_72 +0+0; DFP-0: 800x600_60 +0+0; DFP-0: 800x600_56 +0+0; DFP-0: 640x480 +0+0; DFP-0: 640x480_75 +0+0; DFP-0: 640x480_72 +0+0; DFP-0: 640x480_60 +0+0" SubSection "Display" Depth 24 EndSubSection EndSection Section "Screen" Identifier "Screen1" Device "Device1" Monitor "Monitor1" DefaultDepth 24 Option "Stereo" "0" Option "metamodes" "DFP-1: 1920x1080 +0+0" SubSection "Display" Depth 24 EndSubSection EndSection Section "InputClass" Identifier "Mouse Remap" MatchProduct "Saitek Cyborg R.A.T.7 Mouse" MatchDevicePath "/dev/input/event*" Option "ButtonMapping" "1 2 3 4 5 6 7 8 9 0 0 0 0 0 0" EndSection Pictures http://tinypic.com/r/34o7j1h/6 http://tinypic.com/r/3rn20/6 Ty so Much Mr Magu

Read the article

Introducing AutoVue Document Print Service

- by celine.beck

We recently announced the availability of our new AutoVue Document Print Service products. For more information, please read the article entitled Print Any Document Type with AutoVue Document Print Services that was posted on our blog. The AutoVue Document Print Service products help address a trivial, yet very common challenge: printing and batch printing documents. The AutoVue Document Print Service is a Web-Services based interface, which allows developers to complement their print server solutions by leveraging AutoVue's printing capabilities within broader enterprise applications like Asset Lifecycle Management, Product Lifecycle Management, Enterprise Content Management solutions, etc. This means that you can leverage the AutoVue Document Print Service products as part of your printing solution to automate the printing of virtually any document type required in any business process. Clients that consume AutoVue's Document Print Service can be written in any language (for example Java or .NET) as long as they understand Web Services Description Language (WSDL) and communicate using Simple Object Access Protocol (SOAP). The print solution consists of three main components, as described in the diagram below: a print server (not included in the AutoVue Document Print Service offering) that will interact with your application to identify the files that need to be printed, the printer to send each file, as well as the print options needed for each file (paper size, page orientation, etc), and collate the print job requests. The print server will also take care of calling the AutoVue Document Print Service to perform the actual printing. The AutoVue Document Print Services send files to a printer for printing. The AutoVue Document Print Service products leverage AutoVue's format- and platform agnostic technology to let you print/batch virtually any type of files, without requiring the authoring application installed on your machine. and Printers As shown above, you can trigger printing from your application either programmatically through automated business processes or manually through human interaction. If documents that need to be printed from your application are stored inside a content repository/Document Management System (DMS) such as Oracle Universal Content Management System (UCM), then the Print Server will need to identify the list of documents and pass the ID of each document to the AutoVue DPS to print. In this case, AutoVue DPS leverages the AutoVue VueLink integration (note: AutoVue VueLink integrations are pre-packaged AutoVue integrations with most common enterprise systems. Check our Website for more information on the subject) to fetch documents out of the document management system for printing. In lieu of the AutoVue VueLink integration, you can also leverage the AutoVue Integration Software Development Kit (iSDK) to build your own connector. If the documents you need to print from your application are not stored in a content management system, the Print Server will need to ensure that files are made available to the AutoVue Document Print Service. The Print Server could for example fetch the files out of your application or an extension to the application could be developed to fetch the files and make them available to the AutoVue DPS. More information on methods to pass on file information to the AutoVue Document Print Service products can be found in the AutoVue Document Print Service Overview documentation available on the Oracle Technology Network. Related article: Any Document Type with AutoVue Document Print Services

Read the article

Using the Onboard VGA output with a PCIe video card. Both nVidia

- by sebikul

I have 2 video cards, one On board, a nVidia 6150SE nForce 430 and a PCIe nVidia GeForce GT 220 1GB DDR2 RAM I have already configured the PCIe card to use the dual monitor feature, using the VGA and HDMI ports, but now I want to add a third monitor, using the On board VGA port I have managed to enable the On board graphics processor, which is taking 400MB of ram, but I cant manage to use it, nvidia-settings does not detect it, like it's not usable (but is there) My questions are the following: How can I manage to get the On board VGA display to work together with the PCIe graphics card? If possible, how can I recover those 400 MB the on board card is taking (even without being used) or how can I get it to use the PCIe card available memory? System Details: Linux 2.6.35-28-generic i686 Ubuntu 10.10 (All updates installed) NVIDIA Driver Version: 260.19.06 (Official) If more info is needed please let me know. Here is the lspci output when the On board card is disabled: 00:00.0 RAM memory: nVidia Corporation MCP61 Memory Controller (rev a1) 00:01.0 ISA bridge: nVidia Corporation MCP61 LPC Bridge (rev a2) 00:01.1 SMBus: nVidia Corporation MCP61 SMBus (rev a2) 00:01.2 RAM memory: nVidia Corporation MCP61 Memory Controller (rev a2) 00:01.3 Co-processor: nVidia Corporation MCP61 SMU (rev a2) 00:02.0 USB Controller: nVidia Corporation MCP61 USB Controller (rev a3) 00:02.1 USB Controller: nVidia Corporation MCP61 USB Controller (rev a3) 00:04.0 PCI bridge: nVidia Corporation MCP61 PCI bridge (rev a1) 00:05.0 Audio device: nVidia Corporation MCP61 High Definition Audio (rev a2) 00:06.0 IDE interface: nVidia Corporation MCP61 IDE (rev a2) 00:07.0 Bridge: nVidia Corporation MCP61 Ethernet (rev a2) 00:08.0 IDE interface: nVidia Corporation MCP61 SATA Controller (rev a2) 00:09.0 PCI bridge: nVidia Corporation MCP61 PCI Express bridge (rev a2) 00:0b.0 PCI bridge: nVidia Corporation MCP61 PCI Express bridge (rev a2) 00:0c.0 PCI bridge: nVidia Corporation MCP61 PCI Express bridge (rev a2) 00:0d.0 VGA compatible controller: nVidia Corporation C61 [GeForce 6150SE nForce 430] (rev a2) 00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration 00:18.1 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map 00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller 00:18.3 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control 01:09.0 Ethernet controller: Intel Corporation 82557/8/9/0/1 Ethernet Pro 100 (rev 08) 02:00.0 VGA compatible controller: nVidia Corporation GT216 [GeForce GT 220] (rev a2) 02:00.1 Audio device: nVidia Corporation High Definition Audio Controller (rev a1) And this is when both are enabled: 00:00.0 RAM memory: nVidia Corporation MCP61 Memory Controller (rev a1) 00:01.0 ISA bridge: nVidia Corporation MCP61 LPC Bridge (rev a2) 00:01.1 SMBus: nVidia Corporation MCP61 SMBus (rev a2) 00:01.2 RAM memory: nVidia Corporation MCP61 Memory Controller (rev a2) 00:01.3 Co-processor: nVidia Corporation MCP61 SMU (rev a2) 00:02.0 USB Controller: nVidia Corporation MCP61 USB Controller (rev a3) 00:02.1 USB Controller: nVidia Corporation MCP61 USB Controller (rev a3) 00:04.0 PCI bridge: nVidia Corporation MCP61 PCI bridge (rev a1) 00:05.0 Audio device: nVidia Corporation MCP61 High Definition Audio (rev a2) 00:06.0 IDE interface: nVidia Corporation MCP61 IDE (rev a2) 00:07.0 Bridge: nVidia Corporation MCP61 Ethernet (rev a2) 00:08.0 IDE interface: nVidia Corporation MCP61 SATA Controller (rev a2) 00:09.0 PCI bridge: nVidia Corporation MCP61 PCI Express bridge (rev a2) 00:0b.0 PCI bridge: nVidia Corporation MCP61 PCI Express bridge (rev a2) 00:0c.0 PCI bridge: nVidia Corporation MCP61 PCI Express bridge (rev a2) 00:0d.0 VGA compatible controller: nVidia Corporation C61 [GeForce 6150SE nForce 430] (rev a2) 00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration 00:18.1 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map 00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller 00:18.3 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control 01:09.0 Ethernet controller: Intel Corporation 82557/8/9/0/1 Ethernet Pro 100 (rev 08) 02:00.0 VGA compatible controller: nVidia Corporation GT216 [GeForce GT 220] (rev a2) 02:00.1 Audio device: nVidia Corporation High Definition Audio Controller (rev a1) Output of lshw -class display: *-display description: VGA compatible controller product: GT216 [GeForce GT 220] vendor: nVidia Corporation physical id: 0 bus info: pci@0000:02:00.0 version: a2 width: 64 bits clock: 33MHz capabilities: pm msi pciexpress vga_controller bus_master cap_list rom configuration: driver=nvidia latency=0 resources: irq:18 memory:df000000-dfffffff memory:c0000000-cfffffff memory:da000000-dbffffff ioport:ef80(size=128) memory:def80000-deffffff *-display description: VGA compatible controller product: C61 [GeForce 6150SE nForce 430] vendor: nVidia Corporation physical id: d bus info: pci@0000:00:0d.0 version: a2 width: 64 bits clock: 66MHz capabilities: pm msi vga_controller bus_master cap_list rom configuration: driver=nvidia latency=0 resources: irq:22 memory:dd000000-ddffffff memory:b0000000-bfffffff memory:dc000000-dcffffff memory:deb40000-deb5ffff If what I'm looking for is not possible, please tell me, so I can disable the On board card and recover those 400MB of wasted RAM Thanks for your help!

Search Results

Search found 7124 results on 285 pages for 'printer driver'.

Page 121/285 | < Previous Page | 117 118 119 120 121 122 123 124 125 126 127 128 | Next Page >

- by EricR

- by LifeH2O

- by Jens

- by Edwin

- by S.PRATHIBA

- by nmiranda

- by Jon

- by Carl Smotricz

- by Avilan

- by user1858673

- by Juliet

- by Eric

- by Michael

- by user293545

- by jeah_wicer

- by Tom Sparrow

- by Geoff Dalgas

- by ZeldaPinwheel

- by user365465

- by Sean

- by Chris Hoffman

- by MrMagu

- by celine.beck

- by sebikul

< Previous Page | 117 118 119 120 121 122 123 124 125 126 127 128 | Next Page >