Search Results

Search found 3593 results on 144 pages for 'wake on lan'.

Page 121/144 | < Previous Page | 117 118 119 120 121 122 123 124 125 126 127 128  | Next Page >

• ASA 5505 VPN setup. VPN works but still unable to reach devices in the inside network.

  - by chickenloop

  I've setup a Remote Access VPN on my Cisco ASA 5505. I'm able to connect to my ASA via my phone or the Cisco client, but I'm unable to reach devices in my inside LAN when connected via VPN. The setup is the following: Inside Network : 10.0.0.0/24 VPN_POOL: 172.16.0.0/24 Outside Network: 192.168.1.0/24 ASA is not the perimeter router, there is another device on the 192.168.1.0/24 network which is connected to my cable provider. Obviously UDP port 500 and 4500 are forwarded to the ASA's outside interface. Everything works perfectly, besides the VPN stuff. Config: interface Vlan1 nameif inside security-level 100 ip address 10.0.0.254 255.255.255.0 interface Vlan2 description Outside Interface nameif outside security-level 0 address 192.168.1.254 255.255.255.0 object network VPNPOOL subnet 172.16.0.0 255.255.255.0 object network INSIDE_LAN subnet 10.0.0.0 255.255.255.0 Then the exempt NAT rule. nat (inside,outside) source static INSIDE_LAN INSIDE_LAN destination static VPNPOOL VPNPOOL I don't think that the problem is with the VPN config, as I can successfully establish the VPN connection, but just in case I post it here: group-policy ZSOCA_ASA internal group-policy ZSOCA_ASA attributes vpn-tunnel-protocol ikev1 split-tunnel-policy tunnelspecified split-tunnel-network-list value Split-Tunnel default-domain value default.domain.invalid tunnel-group ZSOCA_ASA type remote-access tunnel-group ZSOCA_ASA general-attributes address-pool VPNPOOL default-group-policy ZSOCA_ASA tunnel-group ZSOCA_ASA ipsec-attributes ikev1 pre-shared-key ***** Any ideas are welcome. Regards.

  Read the article

• Svchost.exe connecting to different IPs with remote port 445

  - by Coll911

  Im using Windows XP Professional SP2. Whenever I start my Windows, svchost.exe starts connecting to all the possible IPs on LAN like from 192.168.1.2 to 192.168.1.200. The local port ranges from 1000-1099 and the remote port being 445. After it's done with the local IPs, it starts connecting to other random IPs. I tried blocking connections to the port 445 using the local security polices but it didn't work. Is there any possible way I could prevent svchost from connecting to these IPs without involving any firewall installed? My PC slows down due to the load. I scanned my PC with MalwareBytes and found out it was infected with a worm, it's deleted now but still svchost is connecting to the IPs. I also found out that in my Windows Firewall settings, under Internet Control Message Protocol (ICMP), there's a tick on "allow incoming echo request" (usually disabled) which is locked and I can't disable it. Its description is as follows Messages sent to this computer will be repeated back to the sender. This is used for trouble shooting for e.g to ping a machine. Requests of this type are automatically allowed if TCP port 445 is enabled. Any solutions? I can't bear going with the reinstalling Windows phase again.

  Read the article

• Many clients on a wireless AP for UDP broadcast packets

  - by distorteddisco

  I asked this question on StackOverflow and was directed over here, so I'd appreciate any advice. I'm deploying a smartphone application as part of a live music performance that depends on receiving UDP broadcast packets from a wireless access point. I'm guessing that between 20 and 50 clients will be connected at any one time. I'm aware that a maximum of 20 clients per access point is advised, but as the UDP broadcast packets are ground through the LAN, how would I be able to link multiple APs together? I'm looking for recommendations on a suitable AP for this. The actual data transmission rates are very low - only a few kB/s - as I'm just sending small messages to the smartphone apps, and there will be no WAN internet connection. I tried it with a few connected peers on an adhoc wireless connection without any problems, but ran into dropped packet issues on an old WRT54G running ddwrt, though it's in pretty rough shape. What's the best way to do this? I suppose I could limit concurrent wireless connections to 20 clients... but more would be nice. EDIT: I should also say that it's purely one-way communication; the smartphone application is only receiving broadcast packets, not sending anything.

  Read the article

• How do I fully share a Hard Drive on my Local Network?

  - by GingerLee

  I have 4 computers connected to a router (DD-WRT) My main PC is Windows 7 (Home Premium). This machine has 2 Hard Disks: HD1 is used for my OS and the other (HD2) is used to store files. My 3 other machines are 1. Ubuntu Destop that I use to learn about linux, 2. A Mac OSX laptop, and 3. A netbook running windows 7. How do I easily share HD2 with my other machines? I would like all my machines to have full access & permissions to HD2 however I would like to RESTRICT access to only PCs that are connected to my router (either via LAN and WiFi) --- btw, I know this is not very secure due to WiFi vulnerability , however, I currently MAC address restrict WiFi connections my router. Extra Info: I have already tried to use the Windows Folder Sharing feature: i.e. I right click over the icon of HD2, and click on the Sharing Tab, but in sub-window labeled "Network File and Folder Sharing", the "Share" button is grayed out. I can click on "Advanced Shared" but that just takes me to a screen in which I have to set certain permissions. What is not clear to me is: How do I set a criteria that shares HD2 with all computer connected to my router?

  Read the article

• Have some questions about setting up a VPN to my private cloud servers

  - by Pure.Krome

  I've got a number of Virtual Servers running at a pretty big Cloud provider. They are all running Windows 2008 R2. I have a CISCO ASA firewall in front of them. Currently, I've got all ports blocked except 80/443/21/3386 (for Remote Desktop). I asked to have a VPN enabled on the firewall and they said it's easy to do BUT I need to use the 3rd party Cisco software. Now, I don't want to get into a debate about it .. but we don't want to install anything extra on our -client- computers. We all use Windows 7 and we love using the built in VPN client to connect to other private LANS we have setup in other locations. So i'm wondering what options I have to create a VPN tunnel to our private cloud LAN? All our cloud servers are part of WORKGROUP, so there's no Active Directory .. nor do we want to install all that. Secondly, we know we can open up a firewall port - so any ports for starting a VPN is fine! Lastly, I was thinking of just using one of the existing servers as the VPN server (and using the Windows VPN software) .. but I'm not sure this is a good thing? Remember - we just want to use the baked in VPN software in Windows 7 .. which is PPTP or SSTP or L2TP/IPSEC. I would -LOVE- to use some free OSS software. For usernames/passwords? We'd probably just have one account .. like U:Hithere P:whatever.. so we don't need any hardcore account management, like Active Directory, etc. So does anyone have any ideas?

  Read the article

• How to route outbound traffic to specific domain "XYZ.org" via a specific NIC or public/static IP?

  - by user139943

  Within the next week or so, I'll be setting up an AT&T U-verse modem with 5 usable static public IP addresses. I plan to register a domain name to 1 of the 5 static IPs (remaining 4 unregistered), and run a website from a single server setup in my home LAN. I'll skip the long winded reason why, but I need to somehow route outbound traffic (originating from my server) destined for one public domain (i.e. http://www.sample.org) through one of the UNREGISTERED static IP addresses ONLY. Basically, I want this public domain to see connections coming from an IP address and not my domain name. If it makes it easier, this can apply to all outbound traffic from my server as long as it doesn't impact users browsing my website! Inbound connections should go through the domain name / registered public IP. Can I accomplish this with my single server with one or multiple NICs? Do I need multiple servers and set one up as a proxy? Please help as my background is in software and not networking, and I don't think I can accomplish this at a software level (e.g. Java). Thanks.

  Read the article

• BIND9 Forwarding by view

  - by Triztian

  Hi I think this is a simple issue, I'd like to forward only to certain IPs in the LAN network, for example I have 2 acl lists: acl "office1" { 192.168.1.15; // With internet access }; acl "production" { 192.168.1.101; // No internet access }; I know that there probably should be more efficient ways to restrict internet access, but at the moment this is what I'd like to try.Here's what I've tried in named.conf.local // Inlcude my acl definitions include "/etc/bind/acls.conf"; view "no-internet" { match-clients { production; }; include "/etc/bind/named.conf.default-zones"; zone "localdomain.com" { type master; file "/etc/bind/db.localdomain.com"; }; zone "1.168.192.in-addr.arpa" { type master; file "/etc/bind/db.192.168.1"; }; } view "internet" { match-clients { office1; }; include "/etc/bind/named.conf.default-zones"; forwarders { 201.56.59.14; // Made Up 201.56.59.15; // Made Up }; zone "localdomain.com" { type master; file "/etc/bind/db.localdomain.com"; }; zone "1.168.192.in-addr.arpa" { type master; file "/etc/bind/db.192.168.1"; }; }; As you can see I want a localdomain.com defined for every computer in my network and forward internet access to the computers in the office but not to the ones on the production floor. I've modified my conf file, however the IP in the "no-internet" acl is able to resolve the domains, even though I've rebooted the computer, flushed the DNS using ipconfig /flushdns and set my DNS Server as the only one, why is this still happening? Thanks in advance.

  Read the article

• GIT and Django Projects

  - by Garfonzo

  I have two servers, a Dev server and a Production server. The Production server runs a live Django site, while the Dev server has a copy of the Django project. I use the Dev server to work on the Django site, make improvements, fix bugs, etc. Once I am satisfied with how the Dev version is working, I move the whole Django directory from the Dev server and replace the same directory on the Production server. The two servers are not on the same LAN so the process is not straight forward. There are a few issues with this that I am having so far. Moving the whole directory is laborious and time consuming If I only change a few files, it is even move tedious to replace a few files than the whole directory since the project is getting fairly large and I worry that I'll miss something I often run into permission issues after I've moved things It's super inefficient, and, due to lack of time, I haven't bothered figuring out a new method. Now it's just getting out of hand and i need to address the situation. I am thinking I need to move to a GIT repository for this process. But my question is how would I set this all up? Do I host the repository on the Production server, pull from the Dev server, do work, then commit? Then I would pull from the Production server (same server the repo is hosted on) to run the current working version? Do I host the repo on the Dev Server, pulling from the same server to do work on the repo, then pull a working version onto the Production server? Should I be hosting the repo on a different server than the Production server and the Dev server (a third server)? Are there any special considerations with Django and repos that I need to worry about? Thanks for the help :)

  Read the article

• SSH with public/private key to iMac fails.

  - by bennedich

  I'm trying to connect to my iMac (server) from my macbook (client) on my LAN. Both have Mac OS X 10.6.4. Server running on a new clean install of the OS. When just activating Remote Login in System Preferences everything works fine. But when setting up ssh to only work with public/private key I get the following error messages from the server log depending on if I use a rsa passphrase or not: With passphrase (case 1): PAM: user account has expired for <myServerUserName> from 192.168.X.X via 192.168.X.Y Without passphrase (case 2): Failed publickey for <myServerUserName> from 192.168.X.X port AAAAA ssh2 This is my setup algorithm: Create a private and public key on client with command ssh-keygen -t rsa. In case 1 I also set a passphrase. Move the id_rsa.pub to the server path /Users/<myServerUserName>/.ssh/ In this folder I execute cat id_rsa.pub > authorized_keys Making sure Remote Login isn't active, I now execute sudo /usr/sbin/sshd -d on the server. Back on the client I now type ssh -v -v -v <myServerUserName>@192.168.X.Y and get prompted to accept RSA key fingerprint. This is NOT the same fingerprint as the one from when I created the private/public key (should it be?). I accept. Depending on case: CASE 1: Client gets halted for password and the response is permission denied even though correct password is given. Back on the server I can read the error message I stated above for case 1: PAM: user account has expired... CASE 2: Client gets message Connection closed by 192.168.X.Y. Back on the server I can read the error message I stated above for case 2: Failed publickey... What could possibly cause this?

  Read the article

• Route all traffic of home network through VPN

  - by user436118

  I have a typical semi advanced home network scenario: A cable modem - eth A wireless router (netgear n600) eth and wlan A home server (Running ubuntu 12.04 LTS, connected over wlan) A bunch of wireless clients (wlan) Lying around I have anoher cheaper wlan router, and two different USB wlan NIC's that are known to work with Linux. ACTA struck. I want to route ALL of my WAN traffic through a remote server through a VPN. For sake of completition, lets say there is a remote server running debian sqeeze where a VPN server is to be installed. The network is then to behave so that if the VPN is not operative, it is separated from the outside world. I am familiar with general system/network practices, but lack the specific detailed knowledge to accomplish this. Please suggest the right approach, packages and configurations you'd use to reach said solution. I've also envisioned the following network configuration, please improve it if you see fit: ==LAN== Client ip:10.1.1.x nm:255.0.0.0 gw:10.1.1.1 reached via WLAN Wlan router 1: ip: 10.1.1.1 nm:255.0.0.0 gw: 10.10.10.1 reached via ETH Homeserver: <<< VPN is initiated here, and the other endpoint is somewhere on the internet. eth0: ip:10.10.10.1 nm: 0.0.0.0 gw:192.168.0.1 reached via WLAN Homeserver: wlan0: ip: 192.168.0.2 nm: 255.255.255.0 gw: 192.168.0.1 reached via WLAN ==WAN== Wlan router 2: ip: 192.168.0.1 nm: 0.0.0.0 gw: set via dhcp uplink connector: cable modem Cable Modem: Remote DHCP. Has on-board DHCP server for ethernet device that connects to it, and only works this way. All this WLAN fussery is because my home server is located in a part of the house where a cable link isnt possible unfortunately.

  Read the article

• Summer daylight time not changing on some active directory domain clients.

  - by Nick Gorbikoff

  We just had a summer daylight change in US. and pc's on my network are behaving strange, some of them change time and some didn't. My network: 2 locations both in Midwest, same time zone. Location 1: 120 pcs (windows xp & windows 200) , with 1 Active Direcotry Domain Controller on Windows 2003 Standard. A couple of windows 2000 servers (they up to date) the rest of the servers are Xen or Debian machines (all up to date) , Second location connected through OpenVPN link all pc's are running fine - but they are all connecting to our AD domain controller. Locaiton 2: 10 pcs, and a shared LAN NAS. Both of the routers/firewalls in both locations are pFsense boxes with ntp service running - but it's up to date. Tried all the usual suspects: I have all the latest updates installed restarted them domain controller is running fine most computers are running fine I have only one domain controller on my network also my firewall serves as ntp server (pfsense) but it's up to date. all of the linux machines are fine since they are querying firewall / router for the time. about 1/3 of my pcs are 1 hour behind. If I change them manually they just change back ( the way domain pc's are supposed to). I've tried everything but I can't think of anything else to try.

  Read the article

• I have to manually change the DNS suffix order every time I connect to VPN. Can I change this permanently or fix the problem somehow?

  - by CarlB

  Sorry in advance but I'm a programmer, not a network engineer, so I'm a noob at this stuff. Anyway, when I am not connected to VPN from my work PC at home, I have the following DNS suffixes listed (real domain names substituted): enterprise.org network.org company.com us.enterprise.org After connecting to VPN, one more DNS suffix is added to the very top of the list: problem-domain.com At this point, most network functions that I can normally perform when actually connected to the LAN in the office are unusable. I get error messages about the network paths not being found and what-not. Anyway, I played around with the suffixes and realized that if I just moved problem-domain.com down one spot to the second in the list, all the problems went away. Unfortunately, it returns to the top spot every time I reconnect, and I tend to get disconnected frequently. Is there something else I can do about this or should I just contact the IT department? I've had this problem before and they weren't able to resolve it but I suppose it would be worth trying again if I could get a different person on the job. What I don't understand is that I thought it didn't matter what order the suffixes were in? Isn't Windows supposed to go through each suffix until it finds a match (or has gone through all the suffixes)? Why is it quitting after the first one? Thanks in advance.

  Read the article

• Tunnell network requests with Windows 7

  - by mark

  I've Windows 7 64bit Pro client in a private LAN behind a Netgear wgr614v7 router. I've also a remote Debian server machine outside. I'd like to tunnel all (or specified ports/protocols) over this outside server, so when I'm on the Windows machine and I request serverfault.com it would not appear from the wgr614v7 public IP but from the server. But it's not only about HTTP traffic, it's basically about everything I'd like to: other TCP ports, even UDP, etc. It must be transparent to the application, e.g. they shouldn't be aware of this. All their requests just appear as being from the server and the tunnel between them takes care about the packets. I'm aware of e.g. Putty and forwarding individual ports or using it as a socks proxy, however not many applications to support this and the support in windows itself looks non-existent to me. I might add it should be something "reasonable" easy to set up. I've heard about PPTP but I'm unsure about it's security implications (by design). Should I go for VPN? There seem to be two common solutions for Linux (OpenSwan and StrongSwan), why would I pick the one over the other? I also fear that setting up a VPN might be quite complex, OTOH maybe it's the only sane way to do the things right? Or is OpenVPN sufficient? I'm seeking for open (source) solutions, what other options to I have or which direction should I head to?

  Read the article

• How to prevent response to who-has requests on virtual eth interface?

  - by user42881

  Hi, we use small embedded X86 linux servers equipped with a single physical ethernet port as a gateway for an IP video surveillance application. Each downstream IP cam is mapped to a separate virtual IP address like this: real eth0 IP address= 192.168.1.1, camera 1 (eth0:1) =192.168.1.61, camera 2 (eth0:2) =192.168.1.62, etc. etc. all on the same eth0 physical port. This approach works well, except that a specific third-party windows video recording application running on a separate PC on the same LAN, automatically pings the virtual IPs looking for unique who-has responses on system startup and, when it gets back the same eth0 MAC address for each virtual interface, freaks out and won't allow us to subsequently manually enter those addresses. The windows app doesn't mind, tho, if it receives no answer to the who-has ping. My question - how can we either (a) shut off the who-has responses just for the virtual eth0:x interfaces while keeping them for the primary physical eth0 port, or, in the alternative, spoof a valid but different MAC address for each virtual interface? Thanks!

  Read the article

• Need solution for Network/Servers.

  - by rehanplus

  Dear All, Please help me. I just joined a new Hospital and want some help managing my network. There are some requirements: Current Network: There is a D.S.L connection and that is terminated on a LINUX proxy and then connected to D-Link layer 2 switches and then providing internet to more then 200 PC's (Would be increasing to 1500 in couple of months). D-Link switches are not configured yet. Also there is one Database server Report server and an application server. In near Future Application should be accessed by local users as well as remote users from internet via our web server. We do have a sharing server and all these servers databases and PC's are on single sub net. Required Network: All i do want is to secure my network from outside access and just allowing specific users via web application and they will be submitting there record for patient card and appointment facility by means of application and entering there record (on our database) but not violating our network resources. Secondly in house users also need to access the same application and also internet but they must have some unique identity and rights (i.e. Finance lab dept. peoples do have limited access to that application). Notes: Should i create V LAN or break sub nets. Having a firewall will solve my issues? is a router needed on these type of scenario's. Currently all the access are restricted from Linux Proxy. Thanks.

  Read the article

• How to setup IIS 7.5 Reverse Proxy for quite a few internal servers - Server Farm?

  - by Tim Murphree

  I have tried for a few days, but I'm lost. Here's what I'm trying to do: I want to setup an IIS 7.5 as a Reverse Proxy for about 30 internal HTTP servers, located on my internal LAN. Everything is running on port 80. The internal servers are really IP based webcams. Here is scenario: www.mycamserver.com/cam1 192.168.1.101 www.mycamserver.com/cam2 192.168.1.102 and so on, until.. www.mycamserver.com/cam30 192.168.1.130 I have installed ARR and URL Rewrite. So far, I have managed, at one time, to seem to forward an incoming URL to an internal server, but the page would not fully load (error 404). Also, I setup a Server Farm, but it seems all traffic is now set to the first node on the Server Farm (192.168.1.101). However, at least the page loads and runs correctly. I simply want to do an exact match, for example, "cam14", and reverse-proxy / rewrite to a corresponding internal server address - "192.168.1.114".

  Read the article

• Y560 Lenovo IdeaPad bandwidth issue

  - by Vlakarados

  I have a Y560 Lenovo IdeaPad, my config: i7 740QM, 4GB RAM, RADEON HD 6570m/5700 1024MB and my network adapter is Intel WIFI Link 5150. The laptop is 2 years old and the problem I'm about to describe is present from the first day. As may be seen here, the receive bandwidth should be up to 300 Mbps, but the maximum download speed from LAN and using torrents is about 2.4MB/s. My internet connection is 100Mbps and other laptops in my house have the appropriate download speed - up to 12MB/s, I have tested at my friends house and at my job, the speed remains the same. I have tried all possible configurations I could think of in network settings - nothing helps. I use Windows 7 and I have had installed different versions (Ultimate, Professional, Home, OEM Home, 64 and 32 bit versions). Some time ago I searched for the problem and found one or two threads that had the same problem and there were something said about a limitation in firmware that some experienced users have managed to bypass. Updating drivers didn't help me either. Is there any reliable way to fix this?

  Read the article

• Configuring two subnets with two NICS. Access from a NAS to the internet

  - by archipestre

  I am having trouble configuring my NAS. I have a DSL router with WIFI (192.168.1.1) in my flatmates room. In my room I have a server with two NICS: 1) wlan0 (192.168.1.2) that connects to the DSL router via wireless 2) em1 (192.168.0.1) that connects to the NAS (192.168.0.20) with a crossover cable. I have Fedora 17 and I have enable packet forwarding. My IP configuration is as follows: WLAN0 inet 192.168.0.1 netmask 255.255.255.0 broadcast 192.168.0.255 EM1 inet 192.168.1.2 netmask 255.255.255.0 broadcast 192.168.1.255 My routing table looks like: Destination Gateway G enmask Flags Metric Ref Use Iface 0.0.0.0 192.168.1.1 0.0.0.0 UG 0 0 0 wlan0 192.168.0.0 0.0.0.0 255.255.255.0 U 0 0 0 em1 192.168.1.0 0.0.0.0 255.255.255.0 U 0 0 0 wlan0 I have enable a static route in the DSL server: Status Network Destination Subnet Mask Interface Gateway Remove Edit Active 192.168.0.0 255.255.255.0 LAN 192.168.1.2 From my server I can ping the DSL router and the NAS. From the NAS I can ping both NICS of the server. However the NAS is unable to ping the DSL router or any address in the Internet. Any idea of what is wrong. Thank you in advance

  Read the article

• Diagnosing PC crashes (most often while using shared folders or torrents)

  - by Dyppl

  For the last few weeks my PC (pretty old P4 with WinXP SP3) has been crashing randomly. It just suddenly reboots instanteneously. It feels hardware-related but I wasn't able to determine wether it's software or hardware that causes it. I did notice a pattern though: it's more likely to crash when I copy a lot of files over network or have uTorrent running, but sometimes it crashes when I am not doing anything with it. Copying files from it over network causes it to crash in 1 to 10 minutes almost every time. Using torrents causes it to crash every 1-3 hours. With neither or that on it crashes every 24 hours or so. I ruled out the following probable causes: PSU (I bought a new one and turned off most of the drives so the power is sufficient 100%) Bad HDD or interface cable on my SATA disk from which I was originally copying the data over network (bought new SATA cable and later yanked out the HDD completely, PC still crashes without it) Video adapter (AGP slot is now empty, using the onboard VGA at the moment) Network adapter (removed it from PCI, using onboard LAN) CPU (I think: I changed the termopaste and it's temperature is below 50C) RAM (I think: I ran Memtest86 and it didn't show any errors) At the moment I only have only one system HDD and DVD drives, a mouse and a keyboard plugged in. The fact that it crashes most often when I use network extensively makes me think that maybe it's software related (I removed the network adapter from PCI and now am using an onboard one, so network hardware is unlikely to cause problems). I am now pondering system reinstall but it's not a pleasant solution so I decided to ask wether there are better ideas first. If someone can share a good diagnostic tool it would be great because I didn't find anything good. Thanks in advance, I hope that "help to diagnose" questions aren't entirely banned here. EDIT: Motherboard is actually ~4 years old as I replaced it back in 2007

  Read the article

• Is there a way to measure wifi traffic on a network from a client?

  - by millimoose

  Is there some way (preferrably one that comes with an existing tool) to measure the traffic going through the whole WiFi network from a computer connected to it? (That is, not from the AP or something between the modem and AP.) My situation is this: a few months back, the internet connection at my parent's place got really sluggish and laggy. (Lag spikes that cause page loads to time out etc, connections plain getting lost and dropping packets forever.) It's impossible to get mom's husband to do anything about this because he brushes this off with something like "just tell your sister to turn off torrents". Unfortunately the WiFi router's firmware doesn't do traffic logging. I'm not going to risk bricking it to put WRT on it; nor am I keen on rewiring the network to add a proxy to analyse the traffic. (I'm one of those people that make computers break just by looking at them, except machines I own.) I'd like to be able to find out roughly how much data is going over the air here while all the LAN wires are out of the router, all the computers accused of torrenting are off, etc. The idea is to either show that: Even if everything but my macbook is turned off, something is congesting the network. The husband is a systems developer and has a whole lot of mysterious hardware that's not to be touched around, one of them might be culprit. There is barely any traffic on the network, but the internet is still sluggish. Meaning this is likely a problem the ISP should solve. (Some hardware of theirs being glitchy, someone on an aggregated line hogging it constantly...) The network is encrypted, but I can temporarily set it to open for the sake of finding this out. So, in conclusion? Can this be done? Or is there some alternative way I could try to diagnose the problem?

  Read the article

• DHCP settings out of range Internet shuts off after a few minutes

  - by user263115

  I recently upgraded from windows eight to windows 8.1 I do not know if this has anything to do with anything I have a 64 bit OS. My Internet goes off by itself every 5 minutes even though my wireless icon at the lower right of the screen still shows connected I had an error message in the last event in it said that might DHCP settings were out of range. I get my internet at my house through a wireless portable hotspot through my smart phone. But i haven't ever had any problems before and i only have this problem on this network. If i turn airplane mode on and reset my network card, the internet will come back to life but soon die. i don't experience this problem while on a different network or if i'm on WiFi. This s really annoying please help Windows IP Configuration Host Name . . . . . . . . . . . . : NastyMcnastyJr Primary Dns Suffix . . . . . . . : Node Type . . . . . . . . . . . . : Hybrid IP Routing Enabled. . . . . . . . : No WINS Proxy Enabled. . . . . . . . : No Ethernet adapter Local Area Connection: Media State . . . . . . . . . . . : Media disconnected Connection-specific DNS Suffix . : Description . . . . . . . . . . . : TeamViewer VPN Adapter Physical Address. . . . . . . . . : 00-FF-5D-13-26-21 DHCP Enabled. . . . . . . . . . . : Yes Autoconfiguration Enabled . . . . : Yes Wireless LAN adapter Local Area Connection* 11: Media State . . . . . . . . . . . : Media disconnected Connection-specific DNS Suffix . : Description . . . . . . . . . . . : Microsoft Wi-Fi Direct Virtual Adapter Physical Address. . . . . . . . . : F6-B7-E2-50-09-38 DHCP Enabled. . . . . . . . . . . : Yes Autoconfiguration Enabled . . . . : Yes Wireless LAN adapter SAMMY McNASTY: Connection-specific DNS Suffix . : Description . . . . . . . . . . . : Broadcom 802.11n Network Adapter Physical Address. . . . . . . . . : F4-B7-E2-50-09-38 DHCP Enabled. . . . . . . . . . . : Yes Autoconfiguration Enabled . . . . : Yes Link-local IPv6 Address . . . . . : fe80::3107:66bc:cf1f:c776%4(Preferred) IPv4 Address. . . . . . . . . . . : 192.168.43.3(Preferred) Subnet Mask . . . . . . . . . . . : 255.255.255.0 Lease Obtained. . . . . . . . . . : Friday, November 1, 2013 9:50:20 PM Lease Expires . . . . . . . . . . : Saturday, November 2, 2013 12:56:46 AM Default Gateway . . . . . . . . . : 192.168.43.1 DHCP Server . . . . . . . . . . . : 192.168.43.1 DHCPv6 IAID . . . . . . . . . . . : 83146722 DHCPv6 Client DUID. . . . . . . . : 00-01-00-01-19-F1-98-B4-20-89-84-84-61-BB DNS Servers . . . . . . . . . . . : 192.168.43.1 NetBIOS over Tcpip. . . . . . . . : Enabled Ethernet adapter Ethernet: Media State . . . . . . . . . . . : Media disconnected Connection-specific DNS Suffix . : Description . . . . . . . . . . . : Broadcom NetLink (TM) Gigabit Ethernet Physical Address. . . . . . . . . : 20-89-84-84-61-BB DHCP Enabled. . . . . . . . . . . : Yes Autoconfiguration Enabled . . . . : Yes Log Name: System Source: Microsoft-Windows-UserPnp Date: 10/26/2013 7:52:23 PM Event ID: 20003 Task Category: (7005) Level: Information Keywords: User: SYSTEM Computer: NastyMcnastyJr Description: Driver Management has concluded the process to add Service vwifibus for Device Instance ID PCI\VEN_14E4&DEV_4727&SUBSYS_E042105B&REV_01\4&3265ADAB&0&00E1 with the following status: 0. Event Xml: 20003 0 4 7005 0 0x8000000000000000 5118 System NastyMcnastyJr vwifibus \SystemRoot\system32\DRIVERS\vwifibus.sys PCI\VEN_14E4&DEV_4727&SUBSYS_E042105B&REV_01\4&3265ADAB&0&00E1 false true 0 Log Name: System Source: Microsoft-Windows-UserPnp Date: 10/19/2013 3:29:12 PM Event ID: 20001 Task Category: (7005) Level: Information Keywords: User: SYSTEM Computer: NastyMcnastyJr Description: Driver Management concluded the process to install driver netbc64.inf_amd64_0df63b5297d0f820\netbc64.inf for Device Instance ID PCI\VEN_14E4&DEV_4727&SUBSYS_E042105B&REV_01\4&3265ADAB&0&00E1 with the following status: 0x0. Event Xml: 20001 0 4 7005 0 0x8000000000000000 2015 System NastyMcnastyJr netbc64.inf_amd64_0df63b5297d0f820\netbc64.inf 6.30.223.102 Microsoft PCI\VEN_14E4&DEV_4727&SUBSYS_E042105B&REV_01\4&3265ADAB&0&00E1 {4D36E972-E325-11CE-BFC1-08002BE10318} false false false 0x0 Broadcom 802.11n Network Adapter Log Name: System Source: Microsoft-Windows-DNS-Client Date: 11/2/2013 12:24:59 AM Event ID: 1014 Task Category: (1014) Level: Warning Keywords: (268435456) User: NETWORK SERVICE Computer: NastyMcnastyJr Description: Name resolution for the name www.google.com timed out after none of the configured DNS servers responded. Event Xml: 1014 0 3 1014 0 0x4000000010000000 34771 System NastyMcnastyJr www.google.com 128 02000000C0A82B01000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000

  Read the article

• Ping "replies" from same computer with 'Destination host unreachable' (no route to other computer)

  - by Srekel

  I've got two computers in a LAN behind a wireless router. One has XP with ip 192.168.1.2 This one has W7 with ip 192.168.1.7 If I try to ping the other one from this computer, I get this: C:\Users\Srekel>ping 192.168.1.2 Pinging 192.168.1.2 with 32 bytes of data: Reply from 192.168.1.7: Destination host unreachable. Reply from 192.168.1.7: Destination host unreachable. Reply from 192.168.1.7: Destination host unreachable. Reply from 192.168.1.7: Destination host unreachable. Ping statistics for 192.168.1.2: Packets: Sent = 4, Received = 4, Lost = 0 (0% loss), Tracert gives the same result: C:\Users\Srekel>tracert 192.168.1.2 Tracing route to 192.168.1.2 over a maximum of 30 hops 1 Kakburken4 [192.168.1.7] reports: Destination host unreachable. Trace complete. Although I can ping and tracert the router without any problems. I have disabled the firewalls on both computers. The router is set to use DHCP (if that matters). Here is the output from "route". C:\Users\Srekel>route print =========================================================================== Interface List 13...00 25 86 df c6 89 ......TP-LINK Wireless N Adapter 12...e0 cb 4e 26 b9 84 ......Realtek PCIe GBE Family Controller #2 11...e0 cb 4e 26 be 94 ......Realtek PCIe GBE Family Controller 1...........................Software Loopback Interface 1 16...00 00 00 00 00 00 00 e0 Microsoft ISATAP Adapter #2 14...00 00 00 00 00 00 00 e0 Teredo Tunneling Pseudo-Interface =========================================================================== IPv4 Route Table =========================================================================== Active Routes: Network Destination Netmask Gateway Interface Metric 0.0.0.0 0.0.0.0 192.168.1.1 192.168.1.7 20 127.0.0.0 255.0.0.0 On-link 127.0.0.1 306 127.0.0.1 255.255.255.255 On-link 127.0.0.1 306 127.255.255.255 255.255.255.255 On-link 127.0.0.1 306 192.168.1.0 255.255.255.0 On-link 192.168.1.7 276 192.168.1.7 255.255.255.255 On-link 192.168.1.7 276 192.168.1.255 255.255.255.255 On-link 192.168.1.7 276 224.0.0.0 240.0.0.0 On-link 127.0.0.1 306 224.0.0.0 240.0.0.0 On-link 192.168.1.7 276 255.255.255.255 255.255.255.255 On-link 127.0.0.1 306 255.255.255.255 255.255.255.255 On-link 192.168.1.7 276 =========================================================================== Persistent Routes: None IPv6 Route Table =========================================================================== Active Routes: If Metric Network Destination Gateway 14 58 ::/0 On-link 1 306 ::1/128 On-link 14 58 2001::/32 On-link 14 306 2001:0:5ef5:73ba:881:20c1:3f57:fef8/128 On-link 14 306 fe80::/64 On-link 14 306 fe80::881:20c1:3f57:fef8/128 On-link 1 306 ff00::/8 On-link 14 306 ff00::/8 On-link =========================================================================== Persistent Routes: None I've set up and debugged a few networks in my life but I'm not really an advanced network user, so I'm not sure what might be wrong. Any ideas? Oh, and pinging this computer from the other computer doesn't work either. EDIT: Adding arp output: C:\Users\Srekel>arp -a Interface: 192.168.1.7 --- 0xd Internet Address Physical Address Type 192.168.1.1 00-1f-33-ef-28-01 dynamic 192.168.1.255 ff-ff-ff-ff-ff-ff static 224.0.0.22 01-00-5e-00-00-16 static 224.0.0.252 01-00-5e-00-00-fc static 239.255.255.250 01-00-5e-7f-ff-fa static 255.255.255.255 ff-ff-ff-ff-ff-ff static Adding ipconfig... C:\Users\Srekel>ipconfig /all Windows IP Configuration Host Name . . . . . . . . . . . . : Kakburken4 Primary Dns Suffix . . . . . . . : Node Type . . . . . . . . . . . . : Hybrid IP Routing Enabled. . . . . . . . : No WINS Proxy Enabled. . . . . . . . : No Wireless LAN adapter Wireless Network Connection: Connection-specific DNS Suffix . : Description . . . . . . . . . . . : TP-LINK Wireless N Adapter Physical Address. . . . . . . . . : 00-25-86-DF-C6-89 DHCP Enabled. . . . . . . . . . . : Yes Autoconfiguration Enabled . . . . : Yes IPv4 Address. . . . . . . . . . . : 192.168.1.7(Preferred) Subnet Mask . . . . . . . . . . . : 255.255.255.0 Lease Obtained. . . . . . . . . . : 09 April 2010 23:09:45 Lease Expires . . . . . . . . . . : 10 April 2010 23:09:45 Default Gateway . . . . . . . . . : 192.168.1.1 DHCP Server . . . . . . . . . . . : 192.168.1.1 DNS Servers . . . . . . . . . . . : 192.168.1.1 NetBIOS over Tcpip. . . . . . . . : Enabled Ethernet adapter Local Area Connection 2: Media State . . . . . . . . . . . : Media disconnected Connection-specific DNS Suffix . : Description . . . . . . . . . . . : Realtek PCIe GBE Family Controller #2 Physical Address. . . . . . . . . : E0-CB-4E-26-B9-84 DHCP Enabled. . . . . . . . . . . : Yes Autoconfiguration Enabled . . . . : Yes Ethernet adapter Local Area Connection: Media State . . . . . . . . . . . : Media disconnected Connection-specific DNS Suffix . : Description . . . . . . . . . . . : Realtek PCIe GBE Family Controller Physical Address. . . . . . . . . : E0-CB-4E-26-BE-94 DHCP Enabled. . . . . . . . . . . : Yes Autoconfiguration Enabled . . . . : Yes Tunnel adapter isatap.{74D5C406-894E-4000-8DE7-6AAEBF7C8382}: Media State . . . . . . . . . . . : Media disconnected Connection-specific DNS Suffix . : Description . . . . . . . . . . . : Microsoft ISATAP Adapter #2 Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0 DHCP Enabled. . . . . . . . . . . : No Autoconfiguration Enabled . . . . : Yes Tunnel adapter Teredo Tunneling Pseudo-Interface: Connection-specific DNS Suffix . : Description . . . . . . . . . . . : Teredo Tunneling Pseudo-Interface Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0 DHCP Enabled. . . . . . . . . . . : No Autoconfiguration Enabled . . . . : Yes IPv6 Address. . . . . . . . . . . : 2001:0:5ef5:73ba:881:20c1:3f57:fef8(Preferred) Link-local IPv6 Address . . . . . : fe80::881:20c1:3f57:fef8%14(Preferred) Default Gateway . . . . . . . . . : :: NetBIOS over Tcpip. . . . . . . . : Disabled

  Read the article

• Weird WLAN connection

  - by tuelsch

  I assembled my first computer on my own. As I realised it had no WLAN (AsRock Z77 Extreme 4m) I bought a WLAN stick (ZyXel NWD 2105), plugged it in, started the setup from the CD and it worked, until I restarted the PC. That's when the problems started. The stick is able to connect to the router (P-660HN-F1Z) and the connection is stable, but not the internet access. In estimately 1 minute intervals there might be a short connection timeframe and dropbox or windows update are able to download some data, but as soon as I try to open a website the internet access is away. Note that the connection to the router does not shut down and remains stable at around 80-90%. The problem is definetly located on my pc, because with my laptop and phone the connection is stable and fast. Because I was so pissed off, I bought a EW-7612PIn V2 (PCI-E WLAN adapter), same problem. Now the weird thing is, if I don't use the PC for about 2 days, start it up, there is internet access (happened with both the stick and the PCI-E card). A bit slow, but it does not get away just like that, until I shut it down. Then, no matter how many times I restart, it won't come back. I googled a lot but now I'm at the end with my latin. Has anyone had a similar problem and resolved it? Technical details: Motherboard: AsRock Z77 Extreme 4M OS: Windows 7 professional 64bit Stick: Zyxel wireless N adapter NWD2105 PCI-E card: Edimax EW-7612PIn V2 Router: ZyXel P-660HN-F1Z Windows-IP-Konfiguration Hostname . . . . . . . . . . . . : xyz Primäres DNS-Suffix . . . . . . . : Knotentyp . . . . . . . . . . . . : Hybrid IP-Routing aktiviert . . . . . . : Nein WINS-Proxy aktiviert . . . . . . : Nein Drahtlos-LAN-Adapter Drahtlosnetzwerkverbindung 5: Medienstatus. . . . . . . . . . . : Medium getrennt Verbindungsspezifisches DNS-Suffix: Beschreibung. . . . . . . . . . . : Microsoft Virtual WiFi Miniport Adapter # 3 Physikalische Adresse . . . . . . : 80-1F-02-61-C0-A6 DHCP aktiviert. . . . . . . . . . : Ja Autokonfiguration aktiviert . . . : Ja Drahtlos-LAN-Adapter Drahtlosnetzwerkverbindung 4: Verbindungsspezifisches DNS-Suffix: Beschreibung. . . . . . . . . . . : Edimax 802.11n Wireless Adapter Physikalische Adresse . . . . . . : 80-1F-02-61-C0-A6 DHCP aktiviert. . . . . . . . . . : Ja Autokonfiguration aktiviert . . . : Ja Verbindungslokale IPv6-Adresse . : fe80::38d2:f489:726d:1fb5%17(Bevorzugt) IPv4-Adresse . . . . . . . . . . : 192.168.1.41(Bevorzugt) Subnetzmaske . . . . . . . . . . : 255.255.255.0 Lease erhalten. . . . . . . . . . : Donnerstag, 15. November 2012 10:51:05 Lease läuft ab. . . . . . . . . . : Sonntag, 18. November 2012 10:51:18 Standardgateway . . . . . . . . . : 192.168.1.1 DHCP-Server . . . . . . . . . . . : 192.168.1.1 DHCPv6-IAID . . . . . . . . . . . : 578821890 DHCPv6-Client-DUID. . . . . . . . : 00-01-00-01-17-FF-D5-FE-BC-5F-F4-48-FC-4B DNS-Server . . . . . . . . . . . : 91.233.182.2 194.230.1.39 NetBIOS über TCP/IP . . . . . . . : Aktiviert Tunneladapter isatap.{263BEB98-344B-435C-888F-1B15B97C3AC1}: Medienstatus. . . . . . . . . . . : Medium getrennt Verbindungsspezifisches DNS-Suffix: Beschreibung. . . . . . . . . . . : Microsoft-ISATAP-Adapter Physikalische Adresse . . . . . . : 00-00-00-00-00-00-00-E0 DHCP aktiviert. . . . . . . . . . : Nein Autokonfiguration aktiviert . . . : Ja Tunneladapter Teredo Tunneling Pseudo-Interface: Verbindungsspezifisches DNS-Suffix: Beschreibung. . . . . . . . . . . : Teredo Tunneling Pseudo-Interface Physikalische Adresse . . . . . . : 00-00-00-00-00-00-00-E0 DHCP aktiviert. . . . . . . . . . : Nein Autokonfiguration aktiviert . . . : Ja IPv6-Adresse. . . . . . . . . . . : 2001:0:9d38:6ab8:209c:2944:3f57:fed6(Bevo rzugt) Verbindungslokale IPv6-Adresse . : fe80::209c:2944:3f57:fed6%11(Bevorzugt) Standardgateway . . . . . . . . . : :: NetBIOS über TCP/IP . . . . . . . : Deaktiviert C:\Users\xyz>ping 192.168.1.1 Ping wird ausgeführt für 192.168.1.1 mit 32 Bytes Daten: Antwort von 192.168.1.1: Bytes=32 Zeit=2ms TTL=254 Antwort von 192.168.1.1: Bytes=32 Zeit=2ms TTL=254 Antwort von 192.168.1.1: Bytes=32 Zeit=2ms TTL=254 Antwort von 192.168.1.1: Bytes=32 Zeit=2ms TTL=254 Ping-Statistik für 192.168.1.1: Pakete: Gesendet = 4, Empfangen = 4, Verloren = 0 (0% Verlust), Ca. Zeitangaben in Millisek.: Minimum = 2ms, Maximum = 2ms, Mittelwert = 2ms

  Read the article

• Silverlight Confirm Dialog to Pause Thread

  - by AlishahNovin

  I'm trying to do a confirmation dialog using Silverlight's ChildWindow object. Ideally, I'd like it to work like MessageBox.Show(), where the entire application halts until an input is received from the user. For example: for(int i=0;i<5;i++) { if (i==3 && MessageBox.Show("Exit early?", "Iterator", MessageBoxButton.OKCancel) == MessageBoxResult.OK) { break; } } Would stop the iteration at 3 if the user hits OK... However, if I were to do something along the lines: ChildWindow confirm = new ChildWindow(); confirm.Title = "Iterator"; confirm.HasCloseButton = false; Grid container = new Grid(); Button closeBtn = new Button(); closeBtn.Content = "Exit early"; closeBtn.Click += delegate { confirm.DialogResult = true; confirm.Close(); }; container.Children.Add(closeBtn); Button continueBtn = new Button(); continueBtn.Content = "Continue!"; continueBtn.Click += delegate { confirm.DialogResult = false; confirm.Close(); }; container.Children.Add(continueBtn); confirm.Content = container; for(int i=0;i<5;i++) { if (i==3) { confirm.Show(); if (confirm.DialogResult.HasResult && (bool)confirm.DialogResult) { break; } } } This clearly would not work, as the thread isn't halted... confirm.DialogResult.HasResult would be false, and the loop would continue past 3. I'm just wondering, how I could go about this properly. Silverlight is single-threaded, so I can't just put the thread to sleep and then wake it up when I'm ready, so I'm just wondering if there's anything else that people could recommend? I've considered reversing the logic - ie, passing the actions I want to occur to the Yes/No events, but in my specific case this wouldn't quite work. Thanks in advance!

  Read the article

• insert/update/delete with xml in .net 3.5

  - by Radhi

  Hello guys, i have "UserProfile" in my site which we have stored in xml fromat of xml is as below <UserProfile xmlns=""> <BasicInfo> <Title value="Basic Details" /> <Fields> <UserId title="UserId" display="No" right="Public" value="12" /> <EmailAddress title="Email Address" display="Yes" right="Public" value="[email protected]" /> <FirstName title="First Name" display="Yes" right="Public" value="Radhi" /> <LastName title="Last Name" display="Yes" right="Public" value="Patel" /> <DisplayName title="Display Name" display="Yes" right="Public" value="Radhi Patel" /> <RegistrationStatusId title="RegistrationStatusId" display="No" right="Public" value="10" /> <RegistrationStatus title="Registration Status" display="Yes" right="Private" value="Registered" /> <CountryName title="Country" display="Yes" right="Public" value="India" /> <StateName title="State" display="Yes" right="Public" value="Maharashtra" /> <CityName title="City" display="Yes" right="Public" value="Mumbai" /> <Gender title="Gender" display="Yes" right="Public" value="FeMale" /> <CreatedBy title="CreatedBy" display="No" right="Public" value="0" /> <CreatedOn title="CreatedOn" display="No" right="Public" value="Nov 27 2009 3:08PM " /> <ModifiedBy title="ModifiedBy" display="No" right="Public" value="12" /> <ModifiedOn title="ModifiedOn" display="No" right="Public" value="Feb 18 2010 1:43PM " /> <LogInStatusId title="LogInStatusId" display="No" right="Public" value="1" /> <LogInStatus title="LogIn Status" display="Yes" right="Private" value="Free" /> <ProfileImagePath title="Profile Pic" display="No" right="Public" value="~/Images/96.jpg" /> </Fields> </BasicInfo> <PersonalInfo> <Title value="Personal Details" /> <Fields> <Nickname title="Nick Name" display="Yes" right="Public" value="Rahul" /> <NativeLocation title="Native" display="Yes" right="Public" value="Amreli" /> <DateofAnniversary title="Anniversary Dt." display="Yes" right="Public" value="12/29/2008" /> <BloodGroupId title="BloodGroupId" display="No" right="Public" value="25" /> <BloodGroupName title="Blood Group" display="Yes" right="Public" value="25" /> <MaritalStatusId title="MaritalStatusId" display="No" right="Public" value="34" /> <MaritalStatusName title="Marital status" display="Yes" right="Private" value="34" /> <DateofDeath title="Death dt" display="Yes" right="Private" value="" /> <CreatedBy title="CreatedBy" display="No" right="Public" value="12" /> <CreatedOn title="CreatedOn" display="No" right="Public" value="Jan 6 2010 2:59PM " /> <ModifiedBy title="ModifiedBy" display="No" right="Public" value="12" /> <ModifiedOn title="ModifiedOn" display="No" right="Public" value="3/10/2010 5:34:14 PM" /> </Fields> </PersonalInfo> <FamilyInfo> <Title value="Family Details" /> <Fields> <GallantryHistory title="Gallantry History" display="Yes" right="Public" value="Gallantry history rahul" /> <Ethinicity title="Ethinicity" display="Yes" right="Public" value="ethnicity rahul" /> <KulDev title="KulDev" display="Yes" right="Public" value="Krishna" /> <KulDevi title="KulDevi" display="Yes" right="Public" value="Khodiyar" /> <Caste title="Caste" display="Yes" right="Private" value="Brhamin" /> <SunSignId title="SunSignId" display="No" right="Public" value="20" /> <SunSignName title="SunSignName" display="Yes" right="Public" value="Scorpio" /> <CreatedBy title="CreatedBy" display="No" right="Public" value="12" /> <CreatedOn title="CreatedOn" display="No" right="Public" value="Dec 29 2009 4:59PM " /> <ModifiedBy title="ModifiedBy" display="No" right="Public" value="12" /> <ModifiedOn title="ModifiedOn" display="No" right="Public" value="3/10/2010 6:29:56 PM" /> </Fields> </FamilyInfo> <HobbyInfo> <Title value="Hobbies/Interests" /> <Fields> <AbountMe title="Abount Me" display="Yes" right="Public" value="Naughty.... " /> <Hobbies title="Hobbies" display="Yes" right="Public" value="Dance, Music, decoration, Shopping" /> <Food title="Food" display="Yes" right="Public" value="Maxican salsa, Pizza, Khoya kaju " /> <Movies title="Movies" display="Yes" right="Public" value="day after tommorrow. wake up sid. avatar" /> <Music title="Music" display="Yes" right="Public" value="Chu kar mere man ko... wake up sid songs, slow music, apgk songs" /> <TVShows title="TV Shows" display="Yes" right="Public" value="business bazzigar, hanah montana" /> <Books title="Books" display="Yes" right="Public" value="mystry novels" /> <Sports title="Sports" display="Yes" right="Public" value="Badminton" /> <Will title="Will" display="Yes" right="Public" value="do photography, to have my own super home... and i can decorate it like anything..." /> <FavouriteQuotes title="Favourite Quotes" display="Yes" right="Public" value="Live like a king nothing lasts forever. not even your troubles smooth sea do not makes skillfull sailors" /> <CremationPrefernces title="Cremation Prefernces" display="Yes" right="Public" value="" /> <CreatedBy title="CreatedBy" display="No" right="Public" value="12" /> <CreatedOn title="CreatedOn" display="No" right="Public" value="Feb 24 2010 2:13PM " /> <ModifiedBy title="ModifiedBy" display="No" right="Public" value="12" /> <ModifiedOn title="ModifiedOn" display="No" right="Public" value="Mar 2 2010 4:34PM " /> </Fields> </HobbyInfo> <PermenantAddr> <Title value="Permenant Address" /> <Fields> <Address title="Address" display="Yes" right="Public" value="Test Entry" /> <CityId title="CityId" display="No" right="Public" value="93" /> <CityName title="City" display="Yes" right="Public" value="Chennai" /> <StateId title="StateId" display="No" right="Public" value="89" /> <StateName title="State" display="Yes" right="Public" value="Tamil Nadu" /> <CountryId title="CountryId" display="No" right="Public" value="108" /> <CountryName title="Country" display="Yes" right="Public" value="India" /> <ZipCode title="ZipCode" display="Yes" right="Private" value="360019" /> <CreatedBy title="CreatedBy" display="No" right="Public" value="12" /> <CreatedOn title="CreatedOn" display="No" right="Public" value="Jan 6 2010 1:29PM " /> <ModifiedBy title="ModifiedBy" display="No" right="Public" value="0" /> <ModifiedOn title="ModifiedOn" display="No" right="Public" value=" " /> </Fields> </PermenantAddr> <PresentAddr> <Title value="Present Address" /> <Fields> <Address title="Ethinicity" display="Yes" right="Public" value="" /> <CityId title="CityId" display="No" right="Public" value="" /> <CityName title="City" display="Yes" right="Public" value="" /> <StateId title="StateId" display="No" right="Public" value="" /> <StateName title="State" display="Yes" right="Public" value="" /> <CountryId title="CountryId" display="No" right="Public" value="" /> <CountryName title="Country" display="Yes" right="Public" value="" /> <ZipCode title="ZipCode" display="Yes" right="Public" value="" /> <CreatedBy title="CreatedBy" display="No" right="Public" value="" /> <CreatedOn title="CreatedOn" display="No" right="Public" value="" /> <ModifiedBy title="ModifiedBy" display="No" right="Public" value="" /> <ModifiedOn title="ModifiedOn" display="No" right="Public" value="" /> </Fields> </PresentAddr> <ContactInfo> <Title value="Contact Details" /> <Fields> <DayPhoneNo title="Day Phone" display="Yes" right="Public" value="" /> <NightPhoneNo title="Night Phone" display="Yes" right="Public" value="" /> <MobileNo title="Mobile No" display="Yes" right="Private" value="" /> <FaxNo title="Fax No" display="Yes" right="CUG" value="" /> <CreatedBy title="CreatedBy" display="No" right="Public" value="12" /> <CreatedOn title="CreatedOn" display="No" right="Public" value="Jan 5 2010 12:37PM " /> <ModifiedBy title="ModifiedBy" display="No" right="Public" value="12" /> <ModifiedOn title="ModifiedOn" display="No" right="Public" value="Feb 17 2010 1:37PM " /> </Fields> </ContactInfo> <EmailInfo> <Title value="Alternate Email Addresses" /> <Fields /> </EmailInfo> <AcademicInfo> <Title value="Education Details" /> <Fields> <Record right="Public"> <Education title="Education" display="Yes" value="Full Attendance" /> <Institute title="Institute" display="Yes" value="Attendance" /> <PassingYear title="Passing Year" display="Yes" value="2000" /> <IsActive title="IsActive" display="No" value="false" /> <CreatedBy title="CreatedBy" display="No" value="12" /> <CreatedOn title="CreatedOn" display="No" value="Dec 31 2009 12:41PM " /> <ModifiedBy title="ModifiedBy" display="No" value="12" /> <ModifiedOn title="ModifiedOn" display="No" value="Dec 31 2009 12:41PM " /> </Record> <Record right="Public"> <Education title="Education" display="Yes" value="D.C.E." /> <Institute title="Institute" display="Yes" value="G.P.G" /> <PassingYear title="Passing Year" display="Yes" value="2005" /> <IsActive title="IsActive" display="No" value="true" /> <CreatedBy title="CreatedBy" display="No" value="12" /> <CreatedOn title="CreatedOn" display="No" value="Dec 31 2009 12:45PM " /> <ModifiedBy title="ModifiedBy" display="No" value="12" /> <ModifiedOn title="ModifiedOn" display="No" value="Dec 31 2009 12:45PM " /> </Record> <Record right="Public"> <Education title="Education" display="Yes" value="MCSE" /> <Institute title="Institute" display="Yes" value="MCSE" /> <PassingYear title="Passing Year" display="Yes" value="2009" /> <IsActive title="IsActive" display="No" value="true" /> <CreatedBy title="CreatedBy" display="No" value="12" /> <CreatedOn title="CreatedOn" display="No" value="Dec 31 2009 6:12PM " /> <ModifiedBy title="ModifiedBy" display="No" value="12" /> <ModifiedOn title="ModifiedOn" display="No" value="Mar 2 2010 4:33PM " /> </Record> <Record right="Public"> <Education title="Education" display="Yes" value="H.S.C." /> <Institute title="Institute" display="Yes" value="G.H.S.E.B." /> <PassingYear title="Passing Year" display="Yes" value="2002" /> <IsActive title="IsActive" display="No" value="true" /> <CreatedBy title="CreatedBy" display="No" value="12" /> <CreatedOn title="CreatedOn" display="No" value="Dec 31 2009 6:17PM " /> <ModifiedBy title="ModifiedBy" display="No" value="12" /> <ModifiedOn title="ModifiedOn" display="No" value="Dec 31 2009 6:17PM " /> </Record> <Record right="Public"> <Education title="Education" display="Yes" value="S.S.C." /> <Institute title="Institute" display="Yes" value="G.S.E.B." /> <PassingYear title="Passing Year" display="Yes" value="2000" /> <IsActive title="IsActive" display="No" value="true" /> <CreatedBy title="CreatedBy" display="No" value="12" /> <CreatedOn title="CreatedOn" display="No" value="Dec 31 2009 6:17PM " /> <ModifiedBy title="ModifiedBy" display="No" value="12" /> <ModifiedOn title="ModifiedOn" display="No" value="Dec 31 2009 6:17PM " /> </Record> </Fields> </AcademicInfo> <AchievementInfo> <Title value="Achievement Details" /> <Fields> <Record right="Public"> <Awards title="Award" display="Yes" value="Test Entry" /> <FieldOfAward title="Field Of Award" display="Yes" value="Test Entry" /> <Tournament title="Tournament" display="Yes" value="Test Entry" /> <AwardDescription title="Description" display="Yes" value="Test Entry" /> <AwardYear title="Award Year" display="Yes" value="2002" /> <IsActive title="IsActive" display="No" value="true" /> <CreatedBy title="CreatedBy" display="No" value="12" /> <CreatedOn title="CreatedOn" display="No" value="Dec 31 2009 3:51PM " /> <ModifiedBy title="ModifiedBy" display="No" value="12" /> <ModifiedOn title="ModifiedOn" display="No" value="Dec 31 2009 3:51PM " /> </Record> <Record right="Public"> <Awards title="Award" display="Yes" value="Test Entry" /> <FieldOfAward title="Field Of Award" display="Yes" value="Test Entry" /> <Tournament title="Tournament" display="Yes" value="Test Entry" /> <AwardDescription title="Description" display="Yes" value="Test Entry" /> <AwardYear title="Award Year" display="Yes" value="2005" /> <IsActive title="IsActive" display="No" value="true" /> <CreatedBy title="CreatedBy" display="No" value="12" /> <CreatedOn title="CreatedOn" display="No" value="Jan 8 2010 10:19AM " /> <ModifiedBy title="ModifiedBy" display="No" value="12" /> <ModifiedOn title="ModifiedOn" display="No" value="Jan 8 2010 10:19AM " /> </Record> <Record right="Public"> <Awards title="Award" display="Yes" value="Test Entry3" /> <FieldOfAward title="Field Of Award" display="Yes" value="Test Entry3" /> <Tournament title="Tournament" display="Yes" value="Test Entry3" /> <AwardDescription title="Description" display="Yes" value="Test Entry3" /> <AwardYear title="Award Year" display="Yes" value="2007" /> <IsActive title="IsActive" display="No" value="true" /> <CreatedBy title="CreatedBy" display="No" value="12" /> <CreatedOn title="CreatedOn" display="No" value="Dec 31 2009 11:47AM " /> <ModifiedBy title="ModifiedBy" display="No" value="12" /> <ModifiedOn title="ModifiedOn" display="No" value="Dec 31 2009 11:47AM " /> </Record> <Record right="Public"> <Awards title="Award" display="Yes" value="Test Entry4" /> <FieldOfAward title="Field Of Award" display="Yes" value="Test Entry4" /> <Tournament title="Tournament" display="Yes" value="Test Entry4" /> <AwardDescription title="Description" display="Yes" value="Test Entry3" /> <AwardYear title="Award Year" display="Yes" value="2000" /> <IsActive title="IsActive" display="No" value="false" /> <CreatedBy title="CreatedBy" display="No" value="12" /> <CreatedOn title="CreatedOn" display="No" value="Dec 31 2009 11:47AM " /> <ModifiedBy title="ModifiedBy" display="No" value="12" /> <ModifiedOn title="ModifiedOn" display="No" value="Dec 31 2009 11:47AM " /> </Record> </Fields> </AchievementInfo> <ProfessionalInfo> <Title value="Professional Details" /> <Fields> <Record right="Public"> <Occupation title="Occupation" display="Yes" value="Test Entry" /> <Organization title="Organization" display="Yes" value="Test Entry" /> <ProjectsDescription title="Description" display="Yes" value="Test Entry" /> <Duration title="Duration" display="Yes" value="26" /> <IsActive title="IsActive" display="No" value="false" /> <CreatedBy title="CreatedBy" display="No" value="12" /> <CreatedOn title="CreatedOn" display="No" value="Jan 4 2010 3:01PM " /> <ModifiedBy title="ModifiedBy" display="No" value="12" /> <ModifiedOn title="ModifiedOn" display="No" value="Jan 4 2010 3:01PM " /> </Record> <Record right="Public"> <Occupation title="Occupation" display="Yes" value="Test Entry" /> <Organization title="Organization" display="Yes" value="Test Entry" /> <ProjectsDescription title="Description" display="Yes" value="Test Entry" /> <Duration title="Duration" display="Yes" value="10" /> <IsActive title="IsActive" display="No" value="false" /> <CreatedBy title="CreatedBy" display="No" value="12" /> <CreatedOn title="CreatedOn" display="No" value="Jan 4 2010 3:01PM " /> <ModifiedBy title="ModifiedBy" display="No" value="12" /> <ModifiedOn title="ModifiedOn" display="No" value="Jan 4 2010 3:01PM " /> </Record> <Record right="Public"> <Occupation title="Occupation" display="Yes" value="Test Entry" /> <Organization title="Organization" display="Yes" value="Test Entry" /> <ProjectsDescription title="Description" display="Yes" value="Test Entry" /> <Duration title="Duration" display="Yes" value="15" /> <IsActive title="IsActive" display="No" value="false" /> <CreatedBy title="CreatedBy" display="No" value="12" /> <CreatedOn title="CreatedOn" display="No" value="Jan 4 2010 3:01PM " /> <ModifiedBy title="ModifiedBy" display="No" value="12" /> <ModifiedOn title="ModifiedOn" display="No" value="Jan 4 2010 3:01PM " /> </Record> </Fields> </ProfessionalInfo> </UserProfile> now for tags like PersonalInfo,contactInfo,Address there will be only one record, but for tags like "OtherInfo","academicInfo","ProfessionalInfo" there will be multiple records so in xml there are tags for that. now to edit tags having one record only for one user i did coding like: private void FillFamilyInfoControls(XElement rootElement) { ddlSunsign.DataBind(); XElement parentElement; string xPathQuery = "FamilyInfo/Fields"; parentElement = rootElement.XPathSelectElement(xPathQuery); txtGallantryHistory.Text = parentElement.Element("GallantryHistory").Attribute("value").Value; txtEthinicity.Text = parentElement.Element("Ethinicity").Attribute("value").Value; txtKulDev.Text = parentElement.Element("KulDev").Attribute("value").Value; txtKulDevi.Text = parentElement.Element("KulDevi").Attribute("value").Value; txtCaste.Text = parentElement.Element("Caste").Attribute("value").Value; ddlSunsign.SelectedValue = parentElement.Element("SunSignId").Attribute("value").Value; ddlSunsign.SelectedItem.Text = parentElement.Element("SunSignName").Attribute("value").Value; } private XElement UpdateFamilyInfoXML(XElement rootElement) { XElement parentElement; string xPathQuery = "FamilyInfo/Fields"; parentElement = rootElement.XPathSelectElement(xPathQuery); parentElement.Element("GallantryHistory").Attribute("value").Value = txtGallantryHistory.Text; parentElement.Element("Ethinicity").Attribute("value").Value = txtEthinicity.Text; parentElement.Element("KulDev").Attribute("value").Value = txtKulDev.Text; parentElement.Element("KulDevi").Attribute("value").Value = txtKulDevi.Text; parentElement.Element("Caste").Attribute("value").Value = txtCaste.Text; parentElement.Element("SunSignId").Attribute("value").Value = ddlSunsign.SelectedItem.Value; parentElement.Element("SunSignName").Attribute("value").Value = ddlSunsign.SelectedItem.Text; parentElement.Element("ModifiedBy").Attribute("value").Value = UMSession.CurrentLoggedInUser.UserId.ToString(); parentElement.Element("ModifiedOn").Attribute("value").Value = System.DateTime.Now.ToString(); return rootElement; //rootElement.XPathSelectElement(xPathQuery) = parentElement; } these 2 functions i have used to update xml and to get data from xml and fill into controls. but for the tags where there are multiple records... i am not able to find any solution /control using which i an do it easily. coz my field's value is in attribute named "Value" when in the examples i saw its between opening and closing tag.. i have 2 methods to do so. 1 . i make one page to edit a single record and pass id of record to that page on editing. open the page in iframe on same page to edit and in page_load get data from database for id passed and fill it in control. 2 . i store xml on server as physical file and use it in page i opened in iframe to edit the record. so i am confused... can anybody please guide me that what shpould i do to let user provide interface to edit this xml data/user profile ?

  Read the article

< Previous Page | 117 118 119 120 121 122 123 124 125 126 127 128  | Next Page >