Search Results

Search found 33971 results on 1359 pages for 'ask and learn'.

Page 122/1359 | < Previous Page | 118 119 120 121 122 123 124 125 126 127 128 129  | Next Page >

  • Bluetooth not working on an Alienware m14x r2

    - by S. L.
    on my alienware m14x r2 laptop with ubuntu 12.04.1 x64, the bluetooth interface is not working. WLAN works fine. I have a dualboot install with ubuntu & win 7 on this laptop. In win 7, the bluetooth interface works fine, because its all activated in BIOS. I have the killer wireless-n 1202 a/g/n interface with integrated bluetooth 4.0 in this laptop. Here is some code : sudo rfkill list 0: phy0: Wireless LAN Soft blocked: no Hard blocked: no lsusb Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 004 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Bus 001 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub Bus 002 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub Bus 001 Device 003: ID 064e:8128 Suyin Corp. Bus 002 Device 003: ID 0cf3:3004 Atheros Communications, Inc. Bus 002 Device 004: ID 187c:0521 Alienware Corporation dmesg | grep "Bluetooth" [ 2.590377] Bluetooth: Core ver 2.16 [ 2.590395] Bluetooth: HCI device and connection manager initialized [ 2.590397] Bluetooth: HCI socket layer initialized [ 2.590399] Bluetooth: L2CAP socket layer initialized [ 2.590403] Bluetooth: SCO socket layer initialized [ 2.591518] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 2.591519] Bluetooth: BNEP filters: protocol multicast [ 2.599411] Bluetooth: RFCOMM TTY layer initialized [ 2.599415] Bluetooth: RFCOMM socket layer initialized [ 2.599416] Bluetooth: RFCOMM ver 1.11 [ 2.696552] Bluetooth: Generic Bluetooth USB driver ver 0.6 [ 2.696751] Bluetooth: Atheros AR30xx firmware driver ver 1.0 [ 2.702607] Bluetooth: Configuration file not found ar3k/ramps_0x11020000_40.dfu [ 2.702609] Bluetooth: Loading sysconfig file failed Any ideas to fix that problem ?

    Read the article

  • MP3 files cut off in the Ubuntu One Android app

    - by rudefyet
    I noticed today on my phone (Droid X running Android 2.2.1) that when streaming the Ubuntu One app would skip to the next song before the previous one had finished. Looking into it, one of the mp3s downloaded from the server was only 2.5MB instead of 4.2MB as it shows on the server itself via one.ubuntu.com. It's happened with multiple tracks today (I remember it happening once the first time I used the app too but shrugged it off as a glitch). The app itself shows a star on the playlist item indicating the file was downloaded even though it was apparently cut off for some reason, perhaps lack of good cell coverage, or some sort of dropped connection. It seems like the latter may be happening and instead of showing an error or retrying it just stops and shows the download is complete.

    Read the article

  • I tried to transplant the wireless_tools to Android4.0 system, but I have a problem with Java

    - by Chen Guoli
    My Linux system is Ubuntu Kylin, a new branch of Ubuntu spreading mainly in China. I have changed some files, such as wireless.22.h, ifrename.c and iwlib.h, in wireless_tools.29/ which is located in Android4.0 root directory. Then I followed these steps: $ cd ~/Android4.0 $ su $[key](change to root) root# source build/envsetup.sh root# cd ~/Android4.0/wireless_tools.2.9/ root# mm Then I got a message telling me that: Your version is: java version "1.7.0_21". The correct version is: Java SE 1.6. Then I did as How can I uninstall my current java and install sun java 1.6 The java was installed successfully, but when i tried mm again: Your version is: java version "1.6.0_27". The correct version is: Java SE 1.6. Then I tried https://source.android.com/source/initializing.html , but it didn't work. How can I install "java SE 1.6." correctly?

    Read the article

  • remove duplicate source entry [closed]

    - by yosa
    Possible Duplicate: Duplicate sources.list entry but cannot find the duplicates? This is my source.list and seems fine to me # deb cdrom:[Ubuntu 12.04 LTS _Precise Pangolin_ - Release amd64 (20120425)]/ precise main restricted # deb cdrom:[Ubuntu 12.04 LTS _Precise Pangolin_ - Release amd64 (20120425)]/ dists/precise/restricted/binary-i386/ # deb cdrom:[Ubuntu 12.04 LTS _Precise Pangolin_ - Release amd64 (20120425)]/ dists/precise/main/binary-i386/ # deb cdrom:[Ubuntu 11.10]/ natty main restricted # deb cdrom:[Ubuntu 11.04 _Natty Narwhal_ - Release i386 (20110427.1)]/ natty main restricted # deb cdrom:[Ubuntu 11.10 _Oneiric Ocelot_ - Release amd64 (20111012)]/ dists/oneiric/main/binary-i386/ # deb cdrom:[Ubuntu 11.10 _Oneiric Ocelot_ - Release amd64 (20111012)]/ oneiric main restricted # See http://help.ubuntu.com/community/UpgradeNotes for how to upgrade to # newer versions of the distribution. deb http://archive.ubuntu.com/ubuntu precise main restricted ## Major bug fix updates produced after the final release of the ## distribution. ## N.B. software from this repository is ENTIRELY UNSUPPORTED by the Ubuntu ## team. Also, please note that software in universe WILL NOT receive any ## review or updates from the Ubuntu security team. deb http://archive.ubuntu.com/ubuntu precise universe ## N.B. software from this repository is ENTIRELY UNSUPPORTED by the Ubuntu ## team, and may not be under a free licence. Please satisfy yourself as to ## your rights to use the software. Also, please note that software in ## multiverse WILL NOT receive any review or updates from the Ubuntu ## security team. deb http://archive.ubuntu.com/ubuntu precise multiverse ## Uncomment the following two lines to add software from the 'backports' ## repository. ## N.B. software from this repository may not have been tested as ## extensively as that contained in the main release, although it includes ## newer versions of some applications which may provide useful features. ## Also, please note that software in backports WILL NOT receive any review ## or updates from the Ubuntu security team. # deb-src http://ma.archive.ubuntu.com/ubuntu/ natty-backports main restricted universe multiverse ## Uncomment the following two lines to add software from Canonical's ## 'partner' repository. ## This software is not part of Ubuntu, but is offered by Canonical and the ## respective vendors as a service to Ubuntu users. deb http://archive.canonical.com/ubuntu precise partner # deb-src http://archive.canonical.com/ubuntu natty partner ## This software is not part of Ubuntu, but is offered by third-party ## developers who want to ship their latest software. deb http://extras.ubuntu.com/ubuntu precise main deb http://archive.ubuntu.com/ubuntu precise-updates restricted main multiverse universe deb http://security.ubuntu.com/ubuntu/ precise-security restricted main multiverse universe deb http://archive.ubuntu.com/ubuntu precise main universe deb-src http://extras.ubuntu.com/ubuntu precise main # See http://help.ubuntu.com/community/UpgradeNotes for how to upgrade to # newer versions of the distribution. deb-src http://archive.ubuntu.com/ubuntu precise main restricted ## Major bug fix updates produced after the final release of the ## distribution. deb http://archive.ubuntu.com/ubuntu precise-updates restricted deb-src http://archive.ubuntu.com/ubuntu precise-updates main restricted ## N.B. software from this repository is ENTIRELY UNSUPPORTED by the Ubuntu ## team. Also, please note that software in universe WILL NOT receive any ## review or updates from the Ubuntu security team. deb-src http://archive.ubuntu.com/ubuntu precise universe deb-src http://archive.ubuntu.com/ubuntu precise-updates universe ## N.B. software from this repository is ENTIRELY UNSUPPORTED by the Ubuntu ## team, and may not be under a free licence. Please satisfy yourself as to ## your rights to use the software. Also, please note that software in ## multiverse WILL NOT receive any review or updates from the Ubuntu ## security team. deb-src http://archive.ubuntu.com/ubuntu precise multiverse deb-src http://archive.ubuntu.com/ubuntu precise-updates multiverse ## N.B. software from this repository may not have been tested as ## extensively as that contained in the main release, although it includes ## newer versions of some applications which may provide useful features. ## Also, please note that software in backports WILL NOT receive any review ## or updates from the Ubuntu security team. deb http://archive.ubuntu.com/ubuntu precise-backports main restricted universe multiverse deb-src http://archive.ubuntu.com/ubuntu precise-backports main restricted universe multiverse deb http://archive.ubuntu.com/ubuntu precise-security main restricted deb-src http://archive.ubuntu.com/ubuntu precise-security main restricted deb http://archive.ubuntu.com/ubuntu precise-security universe deb-src http://archive.ubuntu.com/ubuntu precise-security universe deb http://archive.ubuntu.com/ubuntu precise-security multiverse deb-src http://archive.ubuntu.com/ubuntu precise-security multiverse ## Uncomment the following two lines to add software from Canonical's ## 'partner' repository. ## This software is not part of Ubuntu, but is offered by Canonical and the ## respective vendors as a service to Ubuntu users. # deb http://archive.canonical.com/ubuntu oneiric partner # deb-src http://archive.canonical.com/ubuntu oneiric partner ## This software is not part of Ubuntu, but is offered by third-party ## developers who want to ship their latest software. # See http://help.ubuntu.com/community/UpgradeNotes for how to upgrade to # newer versions of the distribution. ## Major bug fix updates produced after the final release of the ## distribution. ## N.B. software from this repository is ENTIRELY UNSUPPORTED by the Ubuntu ## team. Also, please note that software in universe WILL NOT receive any ## review or updates from the Ubuntu security team. ## N.B. software from this repository is ENTIRELY UNSUPPORTED by the Ubuntu ## team, and may not be under a free licence. Please satisfy yourself as to ## your rights to use the software. Also, please note that software in ## multiverse WILL NOT receive any review or updates from the Ubuntu ## security team. ## N.B. software from this repository may not have been tested as ## extensively as that contained in the main release, although it includes ## newer versions of some applications which may provide useful features. ## Also, please note that software in backports WILL NOT receive any review ## or updates from the Ubuntu security team. ## Uncomment the following two lines to add software from Canonical's ## 'partner' repository. ## This software is not part of Ubuntu, but is offered by Canonical and the ## respective vendors as a service to Ubuntu users. # deb http://archive.canonical.com/ubuntu precise partner # deb-src http://archive.canonical.com/ubuntu precise partner ## This software is not part of Ubuntu, but is offered by third-party ## developers who want to ship their latest software. # deb http://packages.dotdeb.org stable all # deb-src http://packages.dotdeb.org stable all # deb http://ppa.launchpad.net/bean123ch/burg/ubuntu lucid main # deb-src http://ppa.launchpad.net/bean123ch/burg/ubuntu lucid main this is the error given by apt-get update which stops at 64% reading W: Duplicate sources.list entry http://archive.ubuntu.com/ubuntu/ precise/main amd64 Packages (/var/lib/apt/lists/archive.ubuntu.com_ubuntu_dists_precise_main_binary-amd64_Packages) W: Duplicate sources.list entry http://archive.ubuntu.com/ubuntu/ precise/universe amd64 Packages (/var/lib/apt/lists/archive.ubuntu.com_ubuntu_dists_precise_universe_binary-amd64_Packages) W: Duplicate sources.list entry http://archive.ubuntu.com/ubuntu/ precise/main i386 Packages (/var/lib/apt/lists/archive.ubuntu.com_ubuntu_dists_precise_main_binary-i386_Packages) W: Duplicate sources.list entry http://archive.ubuntu.com/ubuntu/ precise/universe i386 Packages (/var/lib/apt/lists/archive.ubuntu.com_ubuntu_dists_precise_universe_binary-i386_Packages) W: Duplicate sources.list entry http://archive.ubuntu.com/ubuntu/ precise-updates/restricted amd64 Packages (/var/lib/apt/lists/archive.ubuntu.com_ubuntu_dists_precise-updates_restricted_binary-amd64_Packages) W: Duplicate sources.list entry http://archive.ubuntu.com/ubuntu/ precise-updates/restricted i386 Packages (/var/lib/apt/lists/archive.ubuntu.com_ubuntu_dists_precise-updates_restricted_binary-i386_Packages)

    Read the article

  • Chroot into a 32 bit version of ubuntu from a 64 bit host

    - by Leif Andersen
    I have a piece of software that only runs on 32 bit linux (Xilinx webPack 10.1, apperently it 'has' to be the old version because that's the latest one compatible with their boards), anyway, this version is only compatible with 32 bit linux. So, I head off to this page to see what I can do: https://help.ubuntu.com/community/32bit_and_64bit Of the 4 options (listed at the bottom): I already installed ia32-libs, and it's still not working I could do that one if needed (which I ended up doing). No, I don't want to be working from a vm all of next semester, that would be painful and I'd rather just reinstall my whole computer to a 32 bit os (which I don't want to do). It didn't sound like it was the best option based on what I've seen. So I went off to do #2, and set up a chroot for 32 bit ubuntu. It linked to this tutorial: https://help.ubuntu.com/community/DebootstrapChroot As I'm running ubuntu 10.10 I made the lucid and newer version changes. Which is to say I wrote: [hardy-i386] description=Ubuntu 8.04 Hardy for i386 directory=/srv/chroot/hardy-i386 personality=linux32 root-users=leif type=directory users=leif to /etc/schroot/chroot.d/hardy-i386 (Note though that I did save it once before I had the file properly formatted, I saved the correct version moments later though). I then ran: $ sudo mkdir -p /srv/chroot/hardy_i386 $ sudo debootstrap --variant=buildd --arch i386 hardy /srv/chroot/hardy_i386 http://archive.ubuntu.com/ubuntu/ Then I ran: $ schroot -l And it showed the proper chroot, but then when I ran: $ schroot -c hardy-i386 -u root I got the following error: E: 10mount: error: Directory '/srv/chroot/hardy-i386' does not exist E: 10mount: warning: Mount location /var/lib/schroot/mount/hardy-i386-80359697-2164-4b10-a05a-89b0f497c4f1 no longer exists; skipping unmount E: hardy-i386-80359697-2164-4b10-a05a-89b0f497c4f1: Chroot setup failed: stage=setup-start Can anyone help me figure out what the problem is? Oh, by the way: /srv/chroot/hardy-i386 most certainly exists. I've also tried it replacing all references with hardy to lucid, to no avail. Oh, one more thing, I did set up the chrome os environment a month back or so: http://www.chromium.org/chromium-os/developer-guide and it had me use something with chmod. So, can anyone figure out what the problem is? Thank you.

    Read the article

  • Having problems booting xubuntu after installation

    - by lagaffenewbe
    I'm newbie with ubuntu, I tried to install ubuntu, at the beginning xubuntu work for the first upgrade to xubuntu 12.04, but after the reboot, no winxp media center ether Xubuntu won't start and I have a screen Ctrl+Alt+Del nothing else. I read a little about, maybe the sata enabled on the bios. What is the problem and can it be fixed or do I have to remove xubuntu. Partition is : 100gb xubuntu 220gb winxp I have an external drive 1 tb Thanks for the help.

    Read the article

  • How to create a plymouth splash with boot messages, progress bar and a spinning logo?

    - by Vitaly
    I would like to know how to create a splash for my ubuntu mavercik with boot messages being displayed when i boot as well as a progress bar and a spinning logo. or if possible how to edit a splash which already has a spinning logo and a progress bar, and add a boot messages to it. any help appreciated, thanks in advance! http://gnome-look.org/content/show.php/Ubuntu+10.4+and+10.10+Plymouth+Splash?content=128607 this is the theme i wud like to edit and i would like somethn like this or this is the exact splash i want to create.

    Read the article

  • Cant add network printer with system-config-printer package

    - by Erick David Ruiz Coronel
    Hello im new here and I dont know if im doing it right but I hope yes. I have a printer conected to a windows 8 machine, also I had ubuntu 13.04 and it worked fine when I printed from linux to windows but when I upgraded to 13.10 my printer didnt worked, I removed it thinking that would fix it but when I tryed to add the printer again I couldnt, I reinstalled cups and the system-config-printer-gnome package but didnt worked. Here is the terminal log : erick@Tauro:~$ system-config-printer Caught non-fatal exception. Traceback: File "/usr/share/system-config-printer/probe_printer.py", line 255, in _do_find fn () File "/usr/share/system-config-printer/probe_printer.py", line 367, in _probe_hplip stderr=null) File "/usr/lib/python2.7/subprocess.py", line 709, in init errread, errwrite) File "/usr/lib/python2.7/subprocess.py", line 1326, in _execute_child raise child_exception OSError: [Errno 2] No existe el archivo o el directorio Continuing anyway.. Traceback (most recent call last): File "/usr/share/system-config-printer/newprinter.py", line 912, in on_btnNPForward_clicked self.nextNPTab() File "/usr/share/system-config-printer/newprinter.py", line 1064, in nextNPTab stderr=file("/dev/null")) File "/usr/lib/python2.7/subprocess.py", line 709, in init errread, errwrite) File "/usr/lib/python2.7/subprocess.py", line 1326, in _execute_child raise child_exception OSError: [Errno 2] No existe el archivo o el directorio Any suggestion please? C:

    Read the article

  • Ubuntu Touch porting: bad file tree

    - by fcole90
    I'm trying to port ubuntu touch to Samsung Galaxy S Plus but I'm finding it really difficult. The problems at first were to find a good CM rom as base, because this device is not officially supported by CM. Currently I'm using EhndroixIII but now I'm founding a lot of problems with the porting guide. In particular my file tree seems totally different from the one of the guide. For example, there is no device folder. What can I do to solve? Should I create those files? My repository is https://github.com/fcole90/utouch-sgsp.git

    Read the article

  • Two 12.04 machines have the same display settings but different results

    - by durron597
    I have one machine that has a relatively fresh install of 12.04 and one that I inherited. The terminal window in the inherited machine has a really weird font, and the regular one is what I would expect. Especially the behavior of the "m" character is messed up. Note: both of these machines are on the same KVM switch. Here is what I've tried: MyUnity on both machines seem the same .bashrc on both machines seem similar in all the ways that would matter for this issue The terminal profiles on both machines are the default Here are the xrandr outputs: Good xrandr: Screen 0: minimum 320 x 200, current 1280 x 1024, maximum 4096 x 4096 VGA1 connected 1280x1024+0+0 (normal left inverted right x axis y axis) 376mm x 301mm 1280x1024 60.0 + 76.0 75.0* 72.0 70.0 1152x864 75.0 1024x768 75.1 70.1 60.0 832x624 74.6 800x600 72.2 75.0 60.3 640x480 72.8 75.0 66.7 60.0 720x400 70.1 Bad xrandr: Screen 0: minimum 8 x 8, current 1280 x 1024, maximum 8192 x 8192 DP-0 disconnected (normal left inverted right x axis y axis) DP-1 disconnected (normal left inverted right x axis y axis) DP-2 disconnected (normal left inverted right x axis y axis) DP-3 connected 1280x1024+0+0 (normal left inverted right x axis y axis) 376mm x 301mm 1280x1024 60.0*+ 76.0 75.0 72.0 70.0 1152x864 75.0 1024x768 75.0 70.1 60.0 800x600 75.0 72.2 60.3 640x480 75.0 72.8 59.9 Finally here are screenshots of both machines, it seems to really only be Terminal, I have askubuntu behind the terminal window for comparison: Good screenshot: Bad Screenshot: Any thoughts as to what this might be?

    Read the article

  • Is there a Generic USB TouchScreen Driver 12.04?

    - by lbjoum
    Is there a Generic USB TouchScreen Driver 12.04? Device 03eb:201c I've been looking for 4 days solid (not very skilled) and can't find a solution. I have a generic tablet: C97- Atom N2600 9.7" 2GB 32GB Bluetooth WiFi WebCam Ext.3G Windows 7 Tablet PC Using 12.04 and cannot find a driver. I installed android and the touchscreen works but still lots of other bugs. Oh well, stuck with Windows 7 and not happy about it. Will keep trying, but too much time wasted already. If you have a solution I would love to try it. ubuntu@ubuntu:~$ lsusb Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 001 Device 002: ID 0cf2:6238 ENE Technology, Inc. Bus 001 Device 003: ID 1a40:0101 Terminus Technology Inc. 4-Port HUB Bus 001 Device 005: ID 05e1:0100 Syntek Semiconductor Co., Ltd 802.11g + Bluetooth Wireless Adapter Bus 001 Device 006: ID 090c:3731 Silicon Motion, Inc. - Taiwan (formerly Feiya Technology Corp.) Bus 003 Device 002: ID 03eb:201c Atmel Corp. at90usbkey sample firmware (HID mouse) (from Windows: HID\VID_03EB&PID_201C\6&5F38127&0&0000 USB\VID_03EB&PID_201C\5&193ADADC&1&2 ) Bus 001 Device 007: ID 0518:0001 EzKEY Corp. USB to PS2 Adaptor v1.09 Bus 001 Device 008: ID 192f:0916 Avago Technologies, Pte. ubuntu@ubuntu:~$ sudo lsusb -v Bus 003 Device 002: ID 03eb:201c Atmel Corp. at90usbkey sample firmware (HID mouse) Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 2.00 bDeviceClass 0 (Defined at Interface level) bDeviceSubClass 0 bDeviceProtocol 0 bMaxPacketSize0 32 idVendor 0x03eb Atmel Corp. idProduct 0x201c at90usbkey sample firmware (HID mouse) bcdDevice 45.a2 iManufacturer 1 CDT iProduct 2 9.75 iSerial 0 bNumConfigurations 1 Configuration Descriptor: bLength 9 bDescriptorType 2 wTotalLength 34 bNumInterfaces 1 bConfigurationValue 1 iConfiguration 0 bmAttributes 0x00 (Missing must-be-set bit!) (Bus Powered) MaxPower 100mA Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 0 bNumEndpoints 1 bInterfaceClass 3 Human Interface Device bInterfaceSubClass 0 No Subclass bInterfaceProtocol 0 None iInterface 0 HID Device Descriptor: bLength 9 bDescriptorType 33 bcdHID 1.11 bCountryCode 0 Not supported bNumDescriptors 1 bDescriptorType 34 Report wDescriptorLength 177 Report Descriptors: ** UNAVAILABLE ** Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x81 EP 1 IN bmAttributes 3 Transfer Type Interrupt Synch Type None Usage Type Data wMaxPacketSize 0x0020 1x 32 bytes bInterval 5 Device Status: 0x00fb Self Powered Remote Wakeup Enabled Debug Mode ubuntu@ubuntu:~$ sudo lshw ubuntu description: Notebook product: To be filled by O.E.M. (To be filled by O.E.M.) vendor: To be filled by O.E.M. version: To be filled by O.E.M. serial: To be filled by O.E.M. width: 32 bits capabilities: smbios-2.7 dmi-2.7 smp-1.4 smp configuration: boot=normal chassis=notebook cpus=2 family=To be filled by O.E.M. sku=To be filled by O.E.M. uuid=00020003-0004-0005-0006-000700080009 *-core description: Motherboard product: Tiger Hill vendor: INTEL Corporation physical id: 0 version: To be filled by O.E.M. serial: To be filled by O.E.M. slot: To be filled by O.E.M. *-firmware description: BIOS vendor: American Megatrends Inc. physical id: 0 version: 4.6.5 date: 08/24/2012 size: 64KiB capacity: 960KiB capabilities: pci upgrade shadowing cdboot bootselect socketedrom edd int13floppy1200 int13floppy720 int13floppy2880 int5printscreen int9keyboard int14serial int17printer acpi usb biosbootspecification *-cpu:0 description: CPU product: Intel(R) Atom(TM) CPU N2600 @ 1.60GHz vendor: Intel Corp. physical id: 4 bus info: cpu@0 version: 6.6.1 serial: 0003-0661-0000-0000-0000-0000 slot: CPU 1 size: 1600MHz capacity: 1600MHz width: 64 bits clock: 400MHz capabilities: x86-64 boot fpu fpu_exception wp vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe nx constant_tsc arch_perfmon pebs bts nonstop_tsc aperfmperf pni dtes64 monitor ds_cpl est tm2 ssse3 cx16 xtpr pdcm movbe lahf_lm arat configuration: cores=2 enabledcores=1 id=2 threads=2 *-cache:0 description: L1 cache physical id: 5 slot: L1-Cache size: 24KiB capacity: 24KiB capabilities: internal write-back unified *-cache:1 description: L2 cache physical id: 6 slot: L2-Cache size: 512KiB capacity: 512KiB capabilities: internal varies unified *-logicalcpu:0 description: Logical CPU physical id: 2.1 width: 64 bits capabilities: logical *-logicalcpu:1 description: Logical CPU physical id: 2.2 width: 64 bits capabilities: logical *-logicalcpu:2 description: Logical CPU physical id: 2.3 width: 64 bits capabilities: logical *-logicalcpu:3 description: Logical CPU physical id: 2.4 width: 64 bits capabilities: logical *-memory description: System Memory physical id: 28 slot: System board or motherboard size: 2GiB *-bank:0 description: SODIMM [empty] product: [Empty] vendor: [Empty] physical id: 0 serial: [Empty] slot: DIMM0 *-bank:1 description: SODIMM DDR3 Synchronous 800 MHz (1.2 ns) vendor: 69 physical id: 1 serial: 00000210 slot: DIMM1 size: 2GiB width: 64 bits clock: 800MHz (1.2ns) *-cpu:1 physical id: 1 bus info: cpu@1 version: 6.6.1 serial: 0003-0661-0000-0000-0000-0000 size: 1600MHz capabilities: ht configuration: id=2 *-logicalcpu:0 description: Logical CPU physical id: 2.1 capabilities: logical *-logicalcpu:1 description: Logical CPU physical id: 2.2 capabilities: logical *-logicalcpu:2 description: Logical CPU physical id: 2.3 capabilities: logical *-logicalcpu:3 description: Logical CPU physical id: 2.4 capabilities: logical *-pci description: Host bridge product: Atom Processor D2xxx/N2xxx DRAM Controller vendor: Intel Corporation physical id: 100 bus info: pci@0000:00:00.0 version: 03 width: 32 bits clock: 33MHz *-display UNCLAIMED description: VGA compatible controller product: Atom Processor D2xxx/N2xxx Integrated Graphics Controller vendor: Intel Corporation physical id: 2 bus info: pci@0000:00:02.0 version: 09 width: 32 bits clock: 33MHz capabilities: pm msi vga_controller bus_master cap_list configuration: latency=0 resources: memory:dfe00000-dfefffff ioport:f100(size=8) *-multimedia description: Audio device product: N10/ICH 7 Family High Definition Audio Controller vendor: Intel Corporation physical id: 1b bus info: pci@0000:00:1b.0 version: 02 width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list configuration: driver=snd_hda_intel latency=0 resources: irq:42 memory:dff00000-dff03fff *-pci:0 description: PCI bridge product: N10/ICH 7 Family PCI Express Port 1 vendor: Intel Corporation physical id: 1c bus info: pci@0000:00:1c.0 version: 02 width: 32 bits clock: 33MHz capabilities: pci pciexpress msi pm normal_decode bus_master cap_list configuration: driver=pcieport resources: irq:40 ioport:2000(size=4096) memory:80000000-801fffff ioport:80200000(size=2097152) *-usb:0 description: USB controller product: N10/ICH 7 Family USB UHCI Controller #1 vendor: Intel Corporation physical id: 1d bus info: pci@0000:00:1d.0 version: 02 width: 32 bits clock: 33MHz capabilities: uhci bus_master configuration: driver=uhci_hcd latency=0 resources: irq:23 ioport:f0a0(size=32) *-usb:1 description: USB controller product: N10/ICH 7 Family USB UHCI Controller #2 vendor: Intel Corporation physical id: 1d.1 bus info: pci@0000:00:1d.1 version: 02 width: 32 bits clock: 33MHz capabilities: uhci bus_master configuration: driver=uhci_hcd latency=0 resources: irq:19 ioport:f080(size=32) *-usb:2 description: USB controller product: N10/ICH 7 Family USB UHCI Controller #3 vendor: Intel Corporation physical id: 1d.2 bus info: pci@0000:00:1d.2 version: 02 width: 32 bits clock: 33MHz capabilities: uhci bus_master configuration: driver=uhci_hcd latency=0 resources: irq:18 ioport:f060(size=32) *-usb:3 description: USB controller product: N10/ICH 7 Family USB UHCI Controller #4 vendor: Intel Corporation physical id: 1d.3 bus info: pci@0000:00:1d.3 version: 02 width: 32 bits clock: 33MHz capabilities: uhci bus_master configuration: driver=uhci_hcd latency=0 resources: irq:16 ioport:f040(size=32) *-usb:4 description: USB controller product: N10/ICH 7 Family USB2 EHCI Controller vendor: Intel Corporation physical id: 1d.7 bus info: pci@0000:00:1d.7 version: 02 width: 32 bits clock: 33MHz capabilities: pm debug ehci bus_master cap_list configuration: driver=ehci_hcd latency=0 resources: irq:23 memory:dff05000-dff053ff *-pci:1 description: PCI bridge product: 82801 Mobile PCI Bridge vendor: Intel Corporation physical id: 1e bus info: pci@0000:00:1e.0 version: e2 width: 32 bits clock: 33MHz capabilities: pci subtractive_decode bus_master cap_list *-isa description: ISA bridge product: NM10 Family LPC Controller vendor: Intel Corporation physical id: 1f bus info: pci@0000:00:1f.0 version: 02 width: 32 bits clock: 33MHz capabilities: isa bus_master cap_list configuration: latency=0 *-storage description: SATA controller product: N10/ICH7 Family SATA Controller [AHCI mode] vendor: Intel Corporation physical id: 1f.2 bus info: pci@0000:00:1f.2 logical name: scsi0 version: 02 width: 32 bits clock: 66MHz capabilities: storage msi pm ahci_1.0 bus_master cap_list emulated configuration: driver=ahci latency=0 resources: irq:41 ioport:f0f0(size=8) ioport:f0e0(size=4) ioport:f0d0(size=8) ioport:f0c0(size=4) ioport:f020(size=16) memory:dff04000-dff043ff *-disk description: ATA Disk product: BIWIN SSD physical id: 0.0.0 bus info: scsi@0:0.0.0 logical name: /dev/sda version: 1206 serial: 123403501060 size: 29GiB (32GB) capabilities: partitioned partitioned:dos configuration: ansiversion=5 signature=8fbe402b *-volume:0 description: Windows NTFS volume physical id: 1 bus info: scsi@0:0.0.0,1 logical name: /dev/sda1 version: 3.1 serial: 249bde5d-8246-9a40-88c7-2d5e3bcaf692 size: 19GiB capacity: 19GiB capabilities: primary bootable ntfs initialized configuration: clustersize=4096 created=2011-04-04 02:27:51 filesystem=ntfs state=clean *-volume:1 description: Windows NTFS volume physical id: 2 bus info: scsi@0:0.0.0,2 logical name: /dev/sda2 version: 3.1 serial: de12d40f-d5ca-8642-b306-acd9349fda1a size: 10231MiB capacity: 10GiB capabilities: primary ntfs initialized configuration: clustersize=4096 created=2011-04-04 01:52:26 filesystem=ntfs state=clean *-serial UNCLAIMED description: SMBus product: N10/ICH 7 Family SMBus Controller vendor: Intel Corporation physical id: 1f.3 bus info: pci@0000:00:1f.3 version: 02 width: 32 bits clock: 33MHz configuration: latency=0 resources: ioport:f000(size=32) *-scsi:0 physical id: 2 bus info: usb@1:1 logical name: scsi4 capabilities: emulated scsi-host configuration: driver=usb-storage *-disk description: SCSI Disk physical id: 0.0.0 bus info: scsi@4:0.0.0 logical name: /dev/sdb size: 29GiB (31GB) capabilities: partitioned partitioned:dos configuration: signature=00017463 *-volume description: Windows FAT volume vendor: mkdosfs physical id: 1 bus info: scsi@4:0.0.0,1 logical name: /dev/sdb1 logical name: /cdrom version: FAT32 serial: 129b-4f87 size: 29GiB capacity: 29GiB capabilities: primary bootable fat initialized configuration: FATs=2 filesystem=fat mount.fstype=vfat mount.options=rw,relatime,fmask=0022,dmask=0022,codepage=cp437,iocharset=iso8859-1,shortname=mixed,errors=remount-ro state=mounted *-scsi:1 physical id: 3 bus info: usb@1:3.1 logical name: scsi6 capabilities: emulated scsi-host configuration: driver=usb-storage *-disk description: SCSI Disk physical id: 0.0.0 bus info: scsi@6:0.0.0 logical name: /dev/sdc size: 7400MiB (7759MB) capabilities: partitioned partitioned:dos configuration: signature=c3072e18 *-volume description: Windows FAT volume vendor: mkdosfs physical id: 1 bus info: scsi@6:0.0.0,1 logical name: /dev/sdc1 logical name: /media/JOUM8G version: FAT32 serial: e676-9311 size: 7394MiB capacity: 7394MiB capabilities: primary bootable fat initialized configuration: FATs=2 filesystem=fat label=Android mount.fstype=vfat mount.options=rw,nosuid,nodev,relatime,uid=999,gid=999,fmask=0022,dmask=0077,codepage=cp437,iocharset=iso8859-1,shortname=mixed,showexec,utf8,flush,errors=remount-ro state=mounted ubuntu@ubuntu:~$ ubuntu@ubuntu:~$ xinput list ? Virtual core pointer id=2 [master pointer (3)] ? ? Virtual core XTEST pointer id=4 [slave pointer (2)] ? ? Plus More Enterprise LTD. USB-compliant keyboard id=10 [slave pointer (2)] ? ? USB Optical Mouse id=11 [slave pointer (2)] ? Virtual core keyboard id=3 [master keyboard (2)] ? Virtual core XTEST keyboard id=5 [slave keyboard (3)] ? Power Button id=6 [slave keyboard (3)] ? Power Button id=7 [slave keyboard (3)] ? Sleep Button id=8 [slave keyboard (3)] ? Plus More Enterprise LTD. USB-compliant keyboard id=9 [slave keyboard (3)] ? USB 2.0 Webcam - Front id=12 [slave keyboard (3)] ? AT Translated Set 2 keyboard id=13 [slave keyboard (3)] ubuntu@ubuntu:~$

    Read the article

  • Plymouth and GRUB do not show at all

    - by WarriorIng64
    I am using Ubuntu 11.04 64-bit as my only OS on my desktop computer, which used to only run Ubuntu 10.04 LTS until I had the time to upgrade it with a fresh install. It uses integrated NVIDIA graphics (listed as a GeForce 6150SE nForce 430 by the NVIDIA X Server Settings utility) with the current proprietary driver as provided by the Additional Drivers utility, and has a VGA connection to a 1680x1050 Acer monitor. I used to get the (ugly-looking version of) Plymouth graphical boot screen while under 10.04. It didn't look that great, but I was fine with it. Now, it doesn't show on 11.04 at all during boot (I just get an error message in a moving gray box from the monitor saying "Input Not Supported"), and only rarely it will show on shutdown, all garbled up. I could not get GRUB to show during boot while holding down Shift, either (same error message), but pressing Enter while it should be up starts the system normally. A picture of the error message I was getting: Once fully booted, the system still shows the login screen and desktop just fine. Any information on how to troubleshoot this would be appreciated. If there's any hardware-specific stuff I forgot to include here, let me know the relevant commands to run in a comment below. Things that I've tried: Running plymouth in a framebuffer: no effect Booting with nomodeset as my grub boot: option no effect Booting with nomodeset and plymouth in a framebuffer: no effect other than Plymouth showing during shutdown only Following the Softpedia instructions for fixing Plymouth's resolution: Problem mostly solved, except logo does not show in Plymouth during boot, and both grub and Plymouth are slightly off-center #4 above, but with nomodeset removed as a grub boot option: same effect as #4 #5 above, but with vt.handoff=7 added as a grub boot option: same effect as #4 I have added the current contents of /etc/default/grub as requested in the comments: # If you change this file, run 'update-grub' afterwards to update # /boot/grub/grub.cfg. # For full documentation of the options in this file, see: # info -f grub -n 'Simple configuration' GRUB_DEFAULT=0 GRUB_HIDDEN_TIMEOUT=0 GRUB_HIDDEN_TIMEOUT_QUIET=true GRUB_TIMEOUT=10 GRUB_DISTRIBUTOR=`lsb_release -i -s 2> /dev/null || echo Debian` GRUB_CMDLINE_LINUX_DEFAULT="quiet splash video=uvesafb:mode_option=1280x1024-24,mtrr=3,scroll=ywrap" GRUB_CMDLINE_LINUX="" # Uncomment to enable BadRAM filtering, modify to suit your needs # This works with Linux (no patch required) and with any kernel that obtains # the memory map information from GRUB (GNU Mach, kernel of FreeBSD ...) #GRUB_BADRAM="0x01234567,0xfefefefe,0x89abcdef,0xefefefef" # Uncomment to disable graphical terminal (grub-pc only) #GRUB_TERMINAL=console # The resolution used on graphical terminal # note that you can use only modes which your graphic card supports via VBE # you can see them in real GRUB with the command `vbeinfo' GRUB_GFXMODE=1280x1024 # Uncomment if you don't want GRUB to pass "root=UUID=xxx" parameter to Linux #GRUB_DISABLE_LINUX_UUID=true # Uncomment to disable generation of recovery mode menu entries #GRUB_DISABLE_RECOVERY="true" # Uncomment to get a beep at grub start #GRUB_INIT_TUNE="480 440 1" CURRENT STATUS: I forgot to uncomment one line as per "things that I've tried" #4, so I took care of that. I can now see GRUB during startup when I hold Shift and a normal-looking Plymouth during shutdown...but Plymouth during boot is now just a solid purple screen. In each case, it's displayed a little off-center to the left, with a thin black bar running down the right side of the monitor. The error pictured above no longer shows. I'd say this problem is about 2/3 solved now. UPDATE: After Natty started freezing up on me, I decided to dual-boot with Oneiric, which unfortunately shows the same problems. Rather than trying all these workarounds though, I decided to do what I should have done from the start and file a pair of bug reports. LAST UPDATE: Bug 850908 has been confirmed as a legitimate nouveaufb bug. I have overwritten my 11.04 partition with 12.04 LTS, and I can confirm at this time that the issue is present there, as well. I will now flag this question to be closed, yet I hope it was helpful for anyone who experienced similar issues; if you are still having the same problem as me, please go there and mark yourself as affected. Thanks!

    Read the article

  • How do I disable the touchpad using the upper left corner on an HP Pavilion dv6?

    - by William
    To disable the touchpad on an HP Pavilion dv6, you double tap on an area in the upper left hand corner of the touchpad. Then the blue indicator light around the border of the touchpad turns red, and the touchpad is disabled. Double tapping on this area again turns the touchpad turns back on. I do a lot of typing, and frequently bump the touchpad, messing up my work and annoying me. So, I would like to enable the ability to disable the touchpad by double-tapping on the area in the upper left hand corner. Unfortunately, there is no function key backup to disable the touchpad. This does not work in Ubuntu. I can turn it off using touchpad-indicator, but the program must be manually started and you have to disable using the key combination. Double-tapping the area is much easier. My computer is the HP Pavilion dv6-6135dx. Any help would be greatly appreciated.

    Read the article

  • Recover Ubuntu grub without LiveCD - Can't boot with Ubuntu LiveCD after install Windows

    - by Paulocoghi
    I installed Windows after installing Ubuntu. But Ubuntu is still intact in its partition. I'm trying to run the Ubuntu LiveCD to recover grub, but the LiveCD no longer works. It stops the boot process and does not load completely. I can not run Ubuntu in live mode to recover grub. Is there any way to recover the grub/grub2 without the LiveCD? Edit: [Important] I've downloaded a new Ubuntu 10.10 ISO. I also did the MD5 check. It's all right. Then, I recorded this .iso and still can not load the LiveCD to the end.

    Read the article

  • dual boot Windows 7 and Ubuntu 11.04, black screen when loading Windows

    - by Sean
    I am proficient with Windows and not so much with Linux. Here is my story: Original system came with Windows 7, got openSUSE installed on the second hard drive, and dual boot for this setup worked fine. Wanted to switch to Windows 7 and Ubuntu 11.04 dual boot so I did a Windows system recovery and it appeared to give me back a fresh Windows 7 install. I then go to install Ubuntu 11.04 and the installer informs me I have multiple operating systems already installed. I go to the advanced partitioning option and sure enough Windows 7 is on /sda while openSUSE is still on /sdb. From here I followed this guide (How to dual-boot Linux and Ubuntu with two hard drives) after I had deleted all the openSUSE partitions on /sdb through the Allocate Drive Space tab of the installer. I make the /boot, swap, /, and /home partitions and set the GRUB into the MBR of the second disk (/dev/sdb). Everything installs fine. I reboot, Windows loads automatically, install EasyBCD and add an entry for Ubuntu into the Windows Boot Manager while assigning the type as GRUB2. Reboot the system and it now shows dual booting options for both Windows and Ubuntu. Problem is: while I can use Ubuntu fine when I try to boot into Windows it just gives me a black screen and after a little while the fans start running crazy. If I restart the computer I will sometimes get the message that my system was put into hibernation mode because the temperature got too high (90C) which I presume is in accordance with the fans going crazy. I have linked the output from the Boot Info Script below, any suggestions on how to fix this issue would be greatly appreciated! UPDATED SCRIPT OUTPUT Boot Info Script output: http://paste.ubuntu.com/682152/

    Read the article

  • How to get the mic on the Creative X-Mod soundcard working correctly?

    - by Nyamiou The Galeanthrope
    Well, I have this problem for a while now. When my computer start the mic seem to work but it's like it's muted. I have to go to a terminal and type alsamixer -c 1 and then I set up PCM Capture Source on Line and set up it back to Mic to get the mic actually working. Is there is a way to do this automatically or to solve the problem. I use a special workaround on this card because of the bug #429642. My workaround is having this at the end of my /usr/share/pulseaudio/alsa-mixer/profile-sets/default.conf : [Mapping xmod-stereo-out] device-strings = surround51:%f description = Analog Stereo Creative Xmod channel-map = front-left,front-right paths-output = analog-output analog-output-headphones analog-output-mono analog-output-lfe-on-mono paths-input = analog-input analog-input-mic analog-input-linein analog-input-aux analog-input-video analog-input-tvtuner analog-input-fm analog-input-mic-line priority = 10 Maybe the bug come from here, maybe I have to change something. Thank you for any help.

    Read the article

  • very long boot up with Ubuntu 10.04.4

    - by wt70707
    I installed Ubuntu 10.04.3 on Atom. Then I do the update and upgrade with: #apt-get update #apt-get upgrade #apt-get dist-upgrade The system can boot up now but in almost 2 minutes. After power on and system test, it will stop at "Verifying DMI pool data" for 10 seconds before the GRUB menu comes up. Then after the choosing of one item, to the start up of OS there is 100 seconds of black screen. The start up after that is normal and the operations in the system is also normal. I am concerned with if it is of hardware problem, or just some problem with the kernel. Also I want to know after "Verifying DMI pool data" what is done? And after we choose an item in GRUB menu, what does the system do? And where can I see the procedure of the whole boot up? The /var/log/boot.log is too simple, and this is it: fsck from util-linux-ng 2.17.2 fsck from util-linux-ng 2.17.2 /dev/mmcblk0p5: clean, ...... /dev/mmcblk0p1: clean, ...... * Starting AppArmor profiles Skipping profile in /etc/apparmor.d/disable: usr.bin.firefox OK] * Setting sensors limits OK]

    Read the article

  • some files just wont install- linux-image-3.5.0-42-generic

    - by jatin
    It gives the following details of the package operation failing after using the sofware updater on 12.10: installArchives() failed: perl: warning: Setting locale failed. perl: warning: Please check that your locale settings: LANGUAGE = (unset), LC_ALL = (unset), LANG = "en_IN.ISO8859-1" are supported and installed on your system. perl: warning: Falling back to the standard locale ("C"). locale: Cannot set LC_CTYPE to default locale: No such file or directory locale: Cannot set LC_MESSAGES to default locale: No such file or directory locale: Cannot set LC_ALL to default locale: No such file or directory Preconfiguring packages ... perl: warning: Setting locale failed. perl: warning: Please check that your locale settings: LANGUAGE = (unset), LC_ALL = (unset), LANG = "en_IN.ISO8859-1" are supported and installed on your system. perl: warning: Falling back to the standard locale ("C"). locale: Cannot set LC_CTYPE to default locale: No such file or directory locale: Cannot set LC_MESSAGES to default locale: No such file or directory locale: Cannot set LC_ALL to default locale: No such file or directory Preconfiguring packages ... perl: warning: Setting locale failed. perl: warning: Please check that your locale settings: LANGUAGE = (unset), LC_ALL = (unset), LANG = "en_IN.ISO8859-1" are supported and installed on your system. perl: warning: Falling back to the standard locale ("C"). locale: Cannot set LC_CTYPE to default locale: No such file or directory locale: Cannot set LC_MESSAGES to default locale: No such file or directory locale: Cannot set LC_ALL to default locale: No such file or directory Preconfiguring packages ... perl: warning: Setting locale failed. perl: warning: Please check that your locale settings: LANGUAGE = (unset), LC_ALL = (unset), LANG = "en_IN.ISO8859-1" are supported and installed on your system. perl: warning: Falling back to the standard locale ("C"). locale: Cannot set LC_CTYPE to default locale: No such file or directory locale: Cannot set LC_MESSAGES to default locale: No such file or directory locale: Cannot set LC_ALL to default locale: No such file or directory Preconfiguring packages ... (Reading database ... (Reading database ... 217566 files and directories currently installed.) Preparing to replace linux-image-3.5.0-36-generic 3.5.0-36.57~precise1 (using .../linux-image-3.5.0-36-generic_3.5.0-36.57_amd64.deb) ... locale: Cannot set LC_CTYPE to default locale: No such file or directory locale: Cannot set LC_MESSAGES to default locale: No such file or directory locale: Cannot set LC_ALL to default locale: No such file or directory Done. Unpacking replacement linux-image-3.5.0-36-generic ... dpkg: error processing /var/cache/apt/archives/linux-image-3.5.0-36-generic_3.5.0-36.57_amd64.deb (--unpack): unable to make backup link of `./boot/System.map-3.5.0-36-generic' before installing new version: Operation not permitted No apport report written because MaxReports is reached already dpkg-deb: error: subprocess paste was killed by signal (Broken pipe) Examining /etc/kernel/postrm.d . run-parts: executing /etc/kernel/postrm.d/initramfs-tools 3.5.0-36-generic /boot/vmlinuz-3.5.0-36-generic run-parts: executing /etc/kernel/postrm.d/zz-update-grub 3.5.0-36-generic /boot/vmlinuz-3.5.0-36-generic Preparing to replace linux-image-3.5.0-42-generic 3.5.0-42.65~precise1 (using .../linux-image-3.5.0-42-generic_3.5.0-42.65_amd64.deb) ... locale: Cannot set LC_CTYPE to default locale: No such file or directory locale: Cannot set LC_MESSAGES to default locale: No such file or directory locale: Cannot set LC_ALL to default locale: No such file or directory Done. Unpacking replacement linux-image-3.5.0-42-generic ... dpkg: error processing /var/cache/apt/archives/linux-image-3.5.0-42-generic_3.5.0-42.65_amd64.deb (--unpack): unable to make backup link of `./boot/System.map-3.5.0-42-generic' before installing new version: Operation not permitted No apport report written because MaxReports is reached already Examining /etc/kernel/postrm.d . run-parts: executing /etc/kernel/postrm.d/initramfs-tools 3.5.0-42-generic /boot/vmlinuz-3.5.0-42-generic dpkg-deb: error: subprocess paste was killed by signal (Broken pipe) run-parts: executing /etc/kernel/postrm.d/zz-update-grub 3.5.0-42-generic /boot/vmlinuz-3.5.0-42-generic Preparing to replace memtest86+ 4.20-1.1ubuntu1 (using .../memtest86+_4.20-1.1ubuntu2.1_amd64.deb) ... Unpacking replacement memtest86+ ... dpkg: error processing /var/cache/apt/archives/memtest86+_4.20-1.1ubuntu2.1_amd64.deb (--unpack): unable to make backup link of `./boot/memtest86+.bin' before installing new version: Operation not permitted No apport report written because MaxReports is reached already locale: Cannot set LC_CTYPE to default locale: No such file or directory locale: Cannot set LC_MESSAGES to default locale: No such file or directory locale: Cannot set LC_ALL to default locale: No such file or directory Errors were encountered while processing: /var/cache/apt/archives/linux-image-3.5.0-36-generic_3.5.0-36.57_amd64.deb /var/cache/apt/archives/linux-image-3.5.0-42-generic_3.5.0-42.65_amd64.deb /var/cache/apt/archives/memtest86+_4.20-1.1ubuntu2.1_amd64.deb Error in function: Output of df -h: Filesystem Size Used Avail Use% Mounted on /dev/sda6 38G 6.5G 30G 19% / udev 3.5G 4.0K 3.5G 1% /dev tmpfs 1.5G 924K 1.5G 1% /run none 5.0M 4.0K 5.0M 1% /run/lock none 3.6G 296K 3.6G 1% /run/shm none 100M 64K 100M 1% /run/user /dev/sda1 197M 87M 111M 44% /boot /dev/sda5 243G 971M 230G 1% /home

    Read the article

  • Failure to toubleshoot a juju charm deployment

    - by Bruno Pereira
    My environments.yaml looks like this: environments: test: type: local control-bucket: juju-a14dfae3830142d9ac23c499395c2785999 admin-secret: 6608267bbd6b447b8c90934167b2a294999 default-series: oneiric juju-origin: distro data-dir: /home/bruno/projects/juju juju bootstrap runs perfect: 2011-11-22 19:19:31,999 INFO Bootstrapping environment 'test' (type: local)... 2011-11-22 19:19:32,004 INFO Checking for required packages... 2011-11-22 19:19:33,584 INFO Starting networking... 2011-11-22 19:19:34,058 INFO Starting zookeeper... 2011-11-22 19:19:34,283 INFO Starting storage server... 2011-11-22 19:19:40,051 INFO Initializing zookeeper hierarchy 2011-11-22 19:19:40,247 INFO Starting machine agent (origin: distro)... [sudo] password for bruno: 2011-11-22 19:23:16,054 INFO Environment bootstrapped 2011-11-22 19:23:16,079 INFO 'bootstrap' command finished successfully Deploy from a known good charm is accepted (tried it with one that I am trying to create): juju deploy --repository=/home/bruno/projects/charms_repo/ local:teamspeak 2011-11-22 19:28:49,929 INFO Charm deployed as service: 'teamspeak' 2011-11-22 19:28:49,962 INFO 'deploy' command finished successfully After this I can see that juju debug-log shows activity and I can see the network indicator going on and off and activity on my hard-disk. Wait... Looking at juju status I get: services: teamspeak: charm: local:oneiric/teamspeak-1 relations: {} units: teamspeak/0: machine: 0 public-address: 192.168.122.226 relations: {} state: start_error juju debug-log does not help and I have no files under /var/log/juju or /var/lib/juju. Last juju debug-log only shows this: 2011-11-22 19:45:20,790 Machine:0: juju.agents.machine DEBUG: Units changed old:set(['wordpress/0']) new:set(['wordpress/0', 'teamspeak/0']) 2011-11-22 19:45:20,823 Machine:0: juju.agents.machine DEBUG: Starting service unit: teamspeak/0 ... 2011-11-22 19:45:21,137 Machine:0: juju.agents.machine DEBUG: Downloading charm local:oneiric/teamspeak-1 to /home/bruno/projects/juju/bruno-test/charms 2011-11-22 19:45:22,115 Machine:0: juju.agents.machine DEBUG: Starting service unit teamspeak/0 2011-11-22 19:45:22,133 Machine:0: unit.deploy INFO: Creating container teamspeak-0... 2011-11-22 19:47:04,586 Machine:0: unit.deploy INFO: Container created for teamspeak/0 2011-11-22 19:47:04,781 Machine:0: unit.deploy DEBUG: Charm extracted into container 2011-11-22 19:47:04,801 Machine:0: unit.deploy DEBUG: Starting container... 2011-11-22 19:47:07,086 Machine:0: unit.deploy INFO: Started container for teamspeak/0 2011-11-22 19:47:07,107 Machine:0: juju.agents.machine INFO: Started service unit teamspeak/0 How can I troubleshot what is happening here?

    Read the article

  • How can I re-open the TrueCrypt window after it's been closed?

    - by user27451
    I installed TrueCrypt 7.1 Standard 64-bit on a fresh install of Ubuntu 11.10 64-bit. After finding the application in the dash I dragged it's icon onto the Unity launcher. I then clicked that icon and TrueCrypt's main window opened. I mounted my encrypted file/volume and then closed the window to do some work. To re-open the TrueCrypt window I would normally click the small blue TrueCrypt icon that appears on the top panel. In Ubuntu 11.10 that icon is no longer there. I receive a message ("TrueCrypt is already running.") if I click on the TrueCrypt icon in the launcher. How can I re-open the TrueCrypt window after it's been closed in Ubuntu 11.10?

    Read the article

  • What scientific plotting software is available?

    - by Helix
    I am currently doing some experimental work and I have a lot of data to trawl though. I use Gnumeric, and it's very good, but often I feel there has to be something better. Ideally I would like the maximum number of features with a minimal learning curve, but really I'd just like to know if there is something better than Gnumeric that I can use for manipulating and plotting data. What would you recommend?

    Read the article

  • How does ecryptfs impact harddisk performance?

    - by Freddi
    I have my home directy encrypted with ecryptfs. Does ecryptfs lead to fragmentation? I have the feeling that reading files, displaying folders and login became continuously slower and slower (although it was not noticeably slow at the beginning). The hard disk makes a lot of seek noise even if I open only a text file. In /home/.ecryptfs I see many big archives (that probably contain the encrypted files), so I'm wondering if Linux file system online defragmentation gains anything here. What options do I have to increase performance? Should I decide whether I maybe better do without encryption?

    Read the article

  • “psmouse.ko' not found” installing ALPS touchpad in a Lenovo Ideapad Flex 14

    - by user279806
    I was following this instructions with Ubuntu 14.04. https://github.com/he1per/psmouse-dkms-alpsv7 and psmouse serio1: alps: Unknown ALPS touchpad in a Lenovo Ideapad Flex 15 And after many tries I received the following error message: root@alisson-Lenovo-Ideapad-Flex14:/tmp/psmouse-dkms-alpsv7# ./install.sh ------ Building with dkms ------- Error! DKMS tree already contains: psmouse-dkms-alpsv7-1.0 You cannot add the same module/version combo more than once. Module psmouse-dkms-alpsv7/1.0 already built for kernel 3.13.0-24-generic/4 ------ Installing with dkms ------- Module psmouse-dkms-alpsv7/1.0 already installed on kernel 3.13.0-24-generic/x86_64 ???? Error: dkms install failed:\n '/usr/lib/modules/3.13.0-24-generic//updates/psmouse.ko' not found. root@alisson-Lenovo-Ideapad-Flex14:/tmp/psmouse-dkms-alpsv7# than, searching for "psmouse.ko": alisson@alisson-Lenovo-Ideapad-Flex14:~$ locate psmouse.ko /lib/modules/3.13.0-24-generic/kernel/drivers/input/mouse/psmouse.ko /lib/modules/3.13.0-24-generic/updates/dkms/psmouse.ko /var/lib/dkms/psmouse-dkms-alpsv7/1.0/3.13.0-24-generic/x86_64/module/psmouse.ko /var/lib/dkms/psmouse-dkms-alpsv7/1.0/build/src/.psmouse.ko.cmd /var/lib/dkms/psmouse-dkms-alpsv7/1.0/build/src/psmouse.ko alisson@alisson-Lenovo-Ideapad-Flex14:~$ What should I do?

    Read the article

  • Why doesn't my ACR38 SmartCard Reader work?

    - by Andrea Grandi
    Hello, I've this SmartCard reader: Bus 002 Device 004: ID 072f:90cc Advanced Card Systems, Ltd ACR38 SmartCard Reader I've installed the following packages: pcscd, libacr38u, pcsc-tools, and a driver available on this website http://www.bit4id.com/italiano/download/download_file/Linux.zip the pcscd daemon seems running: andrea@centurion:~$ ps -e | grep pcsc 2799 ? 00:00:00 pcscd when I try to test if the smart card is working, I get no reply: andrea@centurion:~$ pcsc_scan PC/SC device scanner V 1.4.16 (c) 2001-2009, Ludovic Rousseau <[email protected]> Compiled with PC/SC lite version: 1.5.3 Scanning present readers... Waiting for the first reader... how can I fix this?

    Read the article

  • Ubuntu Font Family and Mac OS X confusing font name and font

    - by William
    I really like the Ubuntu Font Family, and frequently use it in my documents. At school, I want to be able to use the font family so my documents that make at home using Ubuntu show up correctly at school. However, we do not have permission to use Font View (which also allows you to install fonts), so I copied the .ttf files for the Ubuntu font into the /home/Library/Fonts directory. The fonts now show up in the list of available fonts. However, when I click on Ubuntu Light, it uses the Ubuntu font, and when I click on Ubuntu, it us the Ubuntu Light font. This is irritating because my documents that I make on my home computer show up in the opposite font at school, and documents I make at school show up in the opposite font at school. This is really irritating. My school uses Mac OSX 10.4. Any help would be greatly appreciated.

    Read the article

< Previous Page | 118 119 120 121 122 123 124 125 126 127 128 129  | Next Page >