Search Results

Search found 8219 results on 329 pages for 'less'.

Page 122/329 | < Previous Page | 118 119 120 121 122 123 124 125 126 127 128 129  | Next Page >

• Access RAID configuration in x3550M2

  - by Mike B

  I'm trying to configure RAID in a IBM x3550 M2 server. I can't find any messages on boot about any hotkey to access the configuration utility. I wasn't able either in BIOS. The card is a on board LSI 1068e. I can't find the original CD's shipped with the server, but I downloaded Server Guide 9.21 from IBM web. Booted with that, and only getting stuck at "Windows loading"p. Tried with a 8.? version from a x3550 (M1), but it was less useful. Although I do not consider myself an expert, I'm starting to feel like a newbie luser. Any help?

  Read the article

• What can impact the throughput rate at tcp or Os level?

  - by Jimm

  I am facing a problem, where running the same application on different servers, yields unexpected performance results. For example, running the application on a particular faster server (faster cpu, more memory), with no load, yields slower performance than running on a less powerful server on the same network. I am suspecting that either OS or TCP is causing the slowness on the faster server. I cannot use IPerf , unless i modify it, because the "performance" in my application is defined as Component A sends a message to Component B. Component B sends an ACK to component A and ONLY then Component A would send the next message. So it is different from what IPerf does, which to my knowledge, simply tries to push as many messages as possible. Is there a tool that can look at OS and TCP configuration and suggest the cause of slowness?

  Read the article

• Backup / Disaster Recovery, should I store RAR-compressed files?

  - by moraleida

  I'm in the process of recovering files from an accidentally formated Ext4 partition using Photorec. It had about 300Gb of data, of which I've already got hold of about 30Gb. So far, it seems to me that the recovery of RAR-compressed files has been much more successful than the recovery of individual uncompressed files and ZIP compressed files - in the sense that a lot of recovered files/zips were unreadable, and pretty much all of the RAR files were intact. Is there such a relation? Are RAR-compressed files really less prone to corruption and thus easier to recover?

  Read the article

• Remove a known network from Windows 8

  - by Edward Brey

  When Windows 8 detects a network based on the assigned IP address, netmask, default gateway, etc., it remembers the network along with the setting you give it as a public or private network. If you change the configuration of a network (e.g. reconfigure your router), Windows may determine you are on a new network and assign it a name of Network 2 or YourAPN 2. This less-than-friendly name shows up in many places in the Windows 8 UI, but unlike the good old days of Windows 7, there doesn't appear to be any UI to merge or delete these networks. What's the best way to merge or delete networks you don't want?

  Read the article

• Server Backup Solutions - compiling?

  - by Webnet

  I've been researching backup solutions for a LAMP environment to backup our databases and files alike. I'm looking for open source with a UI (so I'm less likely to screw it up). I downloaded http://www.bacula.org/en/ and a few others but they all talk about compiling first.... this doesn't seem like something I should need to do.... is there a linux package that maybe handles backups that I don't know about? I should also specify I'm looking to setup a backup server which backs up from several locations.

  Read the article

• nginx static file buffer

  - by Philip

  I have a nfs which several frontend-servers are connected to for making the files stored on the nfs available for http downloads. It looks like I have problems with the way apache is serving the files, there seems to be a very small buffer or no buffer at all which results in a lot disk seeks. I did some testing with loading the whole requested file into memory at once and serve it to the client from memory. With this technique I need less disk seeks for a download stream. Since I don't want to implement this by myself for production use I thought that I could maybe use nginx for that because the documentation says that it uses buffers for static file serving. Is it possible to increase the buffer size to a few mb, if so which config parameter do I have to change for this? Has anyone experience with large buffers for static file serving? Is there a better way to reduce disk seeks?

  Read the article

• iTunes memory usage

  - by Jordan S. Jones

  Why does iTunes use upwards of 70 megs of ram when it is minimized to my system tray playing music? -- Update -- I understand that iTunes is a resource hog :) What I'm trying to find out, is what part of iTunes is using all that ram. Is it the music library? If I have a smaller music library, will it use less ram? Is it loading all the Album Artwork into ram for some dumb reason? Additionally, is there any recommendations on what someone could do to reduce the amount of ram it is using?

  Read the article

• trouble loggin into a Mac share from a Windows PC on the network

  - by villares

  I have this mixed network and usually log into the Macs from the Windows XP home machines and vice versa. I have no real networking knowledge, things just seem to work, more or less, with the default settings. Now I've got a new Snow Leopard Mac with a shared folder (added the user names of the Windows users at the sharing preferences) and the trouble is some machines can open the share and others can't. I can't see the difference. It feels like some Windows machines have a "cache" and won't ask for the share password, just deny access. I can also see old shares proposed at the Windows "add network place wizard".

  Read the article

• How to move mail among Google Apps for Domains users

  - by Paul Roub

  Considering moving the domain used by my extended family for email to Google Apps. One less server for me to manage, better spam filtering, etc. One thing that's been nice about running my own has been the way I manage my kids' incoming email - it comes to me first, and I drop good mail in a symlinked IMAP folder that we share. A little procmail is all it takes, and straight-through exceptions are easy to implement. (FYI, no I'm not advocating censorship, but manually filtering spam and viruses from my 8-year-old's inbox seems like the right thing to do. YMMV) Anyway. I'm wondering if there's an easy way to do something similar in Google Apps - setting up filters to auto-redirect to me looks easy enough (any gotchas there?), but moving things back is not obvious. Yes, I could access both accounts via IMAP and drag mails across, but does anyone have an easier way?

  Read the article

• How to achieve redundancy across data centers?

  - by BrandonBT

  I have a LAMP server with a lot of hardware redundancy built in. I am not worried about the server becoming unavailable. What I am worried about, however, are potential network issues in the data center the server is in. What I would like to have is another server in another data center for redundancy. Load balancing is less of a concern. With that said, I am relatively clueless on two points: How to have two servers in two geographically separate data centers that have exactly the same data, in terms of both files and MySQL databases. How to ensure that all traffic coming into one data center are automatically transferred to the other database in the case of a network or server failure at the first data center. Any guidance on how to accomplish the above two problems would be greatly appreciated.

  Read the article

• How do I join two worksheets in Excel as I would in SQL?

  - by Joel Coehoorn

  I have two worksheets in two different Excel files. They both contain a list of names and addresses. One is a master list that includes other fields, and the other is a list that only includes name and address and an id column that was pared down by another office. I want to use the 2nd list to filter the first. I know how I could do this very easily with a database inner join, but I'm less clear on how to do this efficiently in Excel. How can join two worksheets in Excel? Bonus points for showing how to do outer joins as well, and I would greatly prefer konwing how to do this without needing a macro.

  Read the article

• Remote desktop Client versus Web based access to reports and limited data entry

  - by Voyager

  We have a requirement from management to give limited access of our Application to Distributors \ Dealers to look at their account statements in our books of account, enter their purchase requirements (sales order for us). We have given a few of them the RDC who connect to our terminal server and access the reports. This involves licensing of TS Client per each distributor. Is it more better, secure and less costly if a web based application is made to only enter the orders and retrive reports like pending orders, ledgers, receivables etc. Also which is more secure as far as database access is concerened...browser based access or RDC access. Please answer.

  Read the article

• Boxee on Dell 32in TV causes headaches, how to troubleshoot?

  - by brown145

  I have revamped an old pc, installing 4GB ram and a 256MB video card so that I could run Boxee to a Dell W3200 series TV that came with my apartment. It is connected via VGA, resolution is 1360x768, 24bit color, 60Htz refresh rate. Unfortunately, every time I use it I end up with a headache after less that 30 min. I have had my eyes check recently, and am able to play xbox (connected via hdmi) on the same TV without problems. What are the potential causes? My system seems to well meet or exceed the min requirements for boxee, XP, AMD Atholon 64 X2 Dual Core, 4GB RAM. Could it be the VGA cable? What is the most cost effective way to trouble shoot?

  Read the article

• How to benchmark kernel (-Os vs -O2)

  - by NightwishFan

  It seems logical to me that on a 64-bit kernel compiling it to optimize for size might help overall. (My distro of choice uses -O2) It has the benefits of more registers and memory and perhaps less cache contention than normal optimized code. I have a kernel compiled like this and it seems excellent. However my question is how can I prove this? I like using Phoronix for "real world" sort of benchmarks so I would prefer to test cases like that. What should I pick to test? Does anyone else have any alternatives? Thank you very much in advance.

  Read the article

• Access denied errors in windows server 2008 for system administrator

  - by NLV

  Hello I've a HP Pavilion DV4 with windows Server 2008 R2 enterprise. My system is connected to a domain. I login using my domain account. I am the administrator for the local machine. But I'm getting access denied everywhere (file system, running commands, using visual studio..literally everywhere..) in my machine. What could be the problem? Any ideas? Please tell me if you need more information as I'm just a developer with less knowledge in system administration.

  Read the article

• how to make a small image become really huge

  - by DennyHalim.com

  all webmaster should already know about hotlinking stuffs. and we know how to ban those bad referer too... but i want to get revenge... i want to replace the hotlinked images with one huge image with few megs in size. i have found one good image. yet it less than 100k. i already use it to replace all bad hotlinkers. how can i convert this image to become few megs?

  Read the article

• Moving windows using keyboard...faster?

  - by Alois Mahdal

  I like using keyboard shortcuts because it's faster as it does not force me to move my hands off the keyboard. In Windows I can use them to move windows around desktop: Press Alt+Space to open common windows menu Press M to choose "Move" command Navigate window position by cursor keys Confirm new position with Enter Additionally, to achieve better accuracy, I can hold Ctrl while navigating. Now the problem is that the normal "step" when moving is about 20px, and my desktop is quite large, so "walking" all the way across takes quite a long time. This kind of defeats the purpose of using keyboard for these tasks. Is it possible to change size of this step so that takes less steps to walk the same distance? (I imagine a hidden setting in Windows registry...?) I tried holding Alt while navigating, but it does not seem to have influence on speed.

  Read the article

• How to make Outlook Calendar reminders stay on top in Windows 7

  - by thursdaysgeek

  I'm just starting to use Windows 7 and I want to know how to make my Outlook reminders pop up and show themselves. They keep opening discretely, quietly as just another Outlook entry on the taskbar. And I keep overlooking them, because they pop up behind everything else. How do I make them less easy to overlook? (Yeah, usually you don't want obnoxious apps that push themselves to the forefront. But there are a few places where I do want that, and Outlook calendar reminders are one of them.)

  Read the article

• How can HAProxy improve availibility, or "how can I prevent my site from going down"? [closed]

  - by Joe Hopfgartner

  I am aware of what HAProxy does, but what if my HAproxy goes down? Or what if my DNS servers go down? Yes, dns is less the problem. However dns only solves to an IP and an IP is announced via BGP to be routed over some router. What if that router goes down? Of course if I have complicated application servers that are likely to fail HAProxy can significantly improve uptime. But my application isnt. In fact my application may very well just be delivering a small static html file via HTTP. Basically if any user anywhere types in MYDOMAIN.COM, I want the user to get SOMETHING on the screen other than a timeout or DNS resolution error. How can I do that? The point of entry is difficult. The so called "initial closure mechanism".

  Read the article

• Backup tape compression

  - by pufferfish

  What things should I check to confirm that compression is actually happening on our tape backup system? Although the tapes are marked as 200G/520G (native/compressed) capacity, they seem to fill up before the 200G mark (some less than 100G). I'm using - Sony AIT-4 tape autochanger - Sony SDX4-200C (AIT-4) tapes - Ubuntu Lucid - Bacula I've tried checking hardware compression with: tapeinfo -f /dev/nst0, which gives Product Type: Tape Drive Vendor ID: 'SONY ' Product ID: 'SDX-900V ' Revision: '0102' Attached Changer API: No SerialNumber: '0001000036' MinBlock: 2 MaxBlock: 8388608 SCSI ID: 1 SCSI LUN: 0 Ready: yes BufferedMode: yes Medium Type: Not Loaded Density Code: 0x33 BlockSize: 0 DataCompEnabled: yes DataCompCapable: yes DataDeCompEnabled: yes CompType: 0x3 DeCompType: 0x3 BOP: yes Block Position: 0 Partition 0 Remaining Kbytes: 201778000 Partition 0 Size in Kbytes: 201779000 ActivePartition: 0 EarlyWarningSize: 0 NumPartitions: 0 MaxPartitions: 0 ... so I presume it's on. Notes: The Bacula documentation says hardware compression needs to be enable with "system tools such as mt"

  Read the article

• Proccess of carrying out a BER Test

  - by data

  I am subscribed to an ISP supplying a 3meg ADSL line. Lately (for the last 4 weeks) speeds have dropped from the usual average downstream speed of ~250kbps to just 0.14Mbps (according to speedtest.net) and employees are complaining about lack of access to the server. I have been calling customer support and logging calls for the last 3 weeks, but they have been unable to determine the source of the problem other carrying out a few bitstream tests and checking the DHCP renewal times. I am going to call back and suggest carrying out a BER test. What type of equipment is needed to carry out this test? I have access to a wide range of Cisco networking equipment. Other: We dont need a leased line as there are less than ten employees.

  Read the article

• Good reasons to keep 32-bit desktop OS's

  - by Mark Henderson

  Server software has been 64-bit only for a while now (Since Server 2008 R2 for Windows, even earlier for Exchange and Sharepoint) and even Ubuntu are pushing you away from 32-bit versions for their server OS's. But is there any good, quantifiable reason to keep a 32-bit desktop operating system maintained? We're preparing our Windows 8 images for the (unfortunate?) few that will be early adopters. The majority of our desktop computers have 4gb or less of RAM, but I would love to not have to bother supporting a 32-bit flavoured operating system any more. Any reason why I should?

  Read the article

• people_dl_import shows millions of records

  - by amit lohogaonkar

  We have a situation now on prod in sharepoint 2007 based intranet platform and it shows thousands of records under people_dl_import category with format spsimport://?$$dl$$/domain1/domain2/domain3/ Also import was not stopping and added millions of records in database and was on verge of disk full. On other servers like dev we have very less data in this category and format is also like spsimport://doaminname?$$dl$$?... which is good and has only 6000 rows and in prod its 2 millions Crawled under people_dl_import category. I need to know the cause of this garbage data and how to fix it. I tried resetting content source and I will do full import in this weekend to see if this garbage data gets cleared. Any idea on cause for thiss issue?

  Read the article

• How to make a quiet laptop ? [closed]

  - by psihodelia

  Most modern laptops have very noisy fans. I am looking for a quiet laptop or a small stationary computer which has all its hardware built in a display. Most tasks will be pdf/docs processing, real-time audio processing, web-surfing and skype video chats. Certainly, there is no any fan-less model today; but maybe some of the existed laptops do not switch on their fans so often or implement different solutions? For example, an iPad has no fan at all and it is fast enough for my needs, but it has no normal operating system, so I can't use it for anything but audio chats and web-surfing. Or maybe I can buy a laptop and tweak it to make it absolutely noiseless? Can you recommend me any solution please? Thanks in advance!

  Read the article

• Sharepoint 2010 reacts very badly to having it's IP address changed. How do I fix it?

  - by Jeff Sacksteder

  I have Sharepoint 2010 set up on a virtual host for prototyping various projects. If I restart the host, the IP changes. Afterwards, SP complains that it can't find it's configuration database. I can't find where it might be storing an IP. To clarify, the URL remains the same - I have a dynamic dns solution in place to handle that. I can't see anything in the web.config files or the database connection strings that would indicate a hardcoded IP. How can I fix this up in less time than re-installing every time I need to do a project?

  Read the article

< Previous Page | 118 119 120 121 122 123 124 125 126 127 128 129  | Next Page >