Search Results

Search found 171339 results on 6854 pages for 'nick not'.

Page 122/6854 | < Previous Page | 118 119 120 121 122 123 124 125 126 127 128 129  | Next Page >

• Computer does not switch on after power outage

  - by cristian

  VOLTAGE DROP OFF FOR PC does not restart The other day my pc was turned off due to power outage. Since that time the computer would not turn on again, no sign of life, it seems dead. I did several tests, changed the power outlet and disconnect the wires ... also I have reseated the cards ... but the result is that nothing changes. What can I do? Could there may be damage to the hardware due to the power outage? Note: the voltage drop is not due to a lightning storm and so is not due to damaged components (burnt card etc ...) Original Text: l'altro giorno il pc mi si è spento improvvisamente per calo tensione.... da quel momento non si è piu' riacceso...nessun segnale di vita...sembra proprio morto. Ho fatto diverse prove, cambio presa di alimentazione, scollegare i fili...insomma ho "mischiato le carte"...ma il risultato è che non cambia nulla. Cosa posso fare? cosa puo' essere successo? Possono esserci danni hardware per il calo di tensione? NB: il calo di tensione non e' dovuto ad una saetta e quindi escluderei danni causa temporale (bruciature scheda ecc...) Grazie mille

  Read the article

• Windows 2003 Active Directory Integrated DNS zone not registering non-domain computers

  - by Jeff Willener

  I'm not a networking guy by all means, I'm just a developer who dabbles enough to get into trouble and I'm there. So bear with me... :) At my office I have a Windows 2003 Domain Controller which also services DNS. On the domain I have a handful of computers and other misc. equipment/toys. For the DNS I only created a Forward Lookup Zone for my domain (mydomain.com). I run a lot of VM's so generally I have everything on the domain, however some of those VM's are not and only in a 'Workgroup'. I also have another laptop which belongs to another domain (otherdomain.com) which is here 100% but I use it for other purposes and has to belong to the otherdomain.com. With all that said, I have two questions: I have found any computer not on mydomain.com does not register it's IP address even though 'Register this connections address in DNS' is set to in the 'Advanced TCP/IP Settings' for the nic. Where have I messed this up? On the laptop which is registered on otherdomain.com, when I do a nslookup for a computer on mydomain.com (e.g. nslookup devbox1) it appends otherdomain.com as the suffix (e.g. queries devbox1.otherdomain.com). Same thing occurs if I use the fully qualified name. In the 'Advanced TCP/IP Settings' for that nic, I can 'Append these DNS suffixes' of mydomain.com but I fear that will hose my DNS lookups when I VPN to otherdomain.com. So what is the correct approach to resolve this issue? Do I add both mydomain.com and otherdomain.com in that order?

  Read the article

• Mysql Cluster not working on Ubuntu

  - by user53864

  I am unable to setup MySQL Cluster on ubuntu servers. As a starting point I started from the link but I am not successful and the tar ball version I download is 6.3.45. As I wanted to test the mysql cluster, the Data node and SQL node are same but sql never appeared as connected in management node console and it looks like below. [ndbd(NDB)] 2 node(s) id=2 @192.168.1.107 (Version: version number, Nodegroup: 0, Master) id=3 @192.168.1.108 (Version: version number, Nodegroup: 0) [ndb_mgmd(MGM)] 1 node(s) id=1 @192.168.1.105 (Version: version number) [mysqld(API)] 2 node(s) id=4 (not connected, accepting connect from 192.168.1.107) id=5 (not connected, accepting connect from 192.168.1.108) On all the 3 machines mysql-server & client(apt-get install mysql-server mysql-client) were already installed and I completely stopped and also removed them at the system start up. Now the mysqld is from extracted cluster tar ball(/usr/local/mysql/support-files/mysql.server). As for testing, I created a test database on both the data nodes but the tables are also not syncing on other node. I checked many links, configurations are remained similar in all the links but somewhere it's going wrong. Anymore extra package is required?, Could anyone help me here..?. I am trying this for past 3 days... Thank you!

  Read the article

• Kerberos service on win2k dc will not start following disk failure

  - by iwilson68

  Hi, I have a win2k (mixed mode domain) with 4 DCS. One of these also acts an exchange 2000 server which uses 2 logical volumes from an MSA 2000 array. AD etc is stored on local drives. We experienced a problem last week when the raid array fell back to a redundant controller and this temporarily meant that the two logical drives were not visible to the server for around 5 minutes and a couple of reboots. The log records these Events as Type: Warning Event Source: Disk Event Category: None Event ID: 51 Date: 06/11/2009 Time: 11:46:23 User: N/A Computer: server1 Description: An error was detected on device \Device\Harddisk1\DR1 during a paging operation. Following these problems, the server “kerberos Key Distribution” service refuses to start with an “error.31 a device attached to the system is not functioning”. All other automatic start services (including net logon) are running and there are no DNS issues etc. All devices are also functioning but the two logical MSA disks are now numbered in the Windows Disk Management MMC as 2 and 4 and I suspect that they may have previously been identified as disks 1 & 2 and perhaps windows still sees this as an ongoing failure?? Replication has not been affected but obviously there are many audit failures in the security log relating to users and workstations presumably linked to the Kerberos issue. Attempting to manually start the kerberos service generates the following in the System Log. Event Type: Error Event Source: Service Control Manager Event Category: None Event ID: 7023 Date: 09/11/2009 Time: 09:46:55 User: N/A Computer: Server1 Description: The Kerberos Key Distribution Center service terminated with the following error: A device attached to the system is not functioning. DCDIAG passes all tests except “Advertising” and “Services” which I believe relate directly to the failure of Kerberos only. Any advice would be appreciated.

  Read the article

• rsync not copying hard links

  - by A.Ellett

  I have two computers (both MacBook Airs) for which I sync one directory tree in both, but not the entire hard drive or any other directories. Let's say on computer A the directory is /Users/aellett/projects Let's say on computer B the directory is /Users/bellett/projects Generally, I'll log into computer B and then remotely connect to computer A as user 'aellett'. As super user I sync the two project directories as follows: rsync -av /Volumes/aellett/projects/ /Users/bellett/projects/ and this works as expected. On both computers I have another file letter.txt in a different directory which is not getting synced. Let's say on computer A the file is found in /Users/aellett/letters On computer B the file is found in /Users/bellett/correspondence Generally, I don't want to share what's not included in /Users/<username>/projects. But I do want to share this particular file. So on both computer I made a correspondence directory in projects. And then I made hard links as follows On computer A: ln /Users/aellett/letters/letter.txt /Users/aellett/projects/correspondence/letter.txt On computer B: ln /Users/bellett/correspondence/letter.txt /Users/aellett/projects/correspondence/letter.txt The next time I synced the two computers I did the following rsync -av -H /Volumes/aellett/projects/ /Users/bellett/projects/ When I checked on computer B, /Users/bellett/projects/correspondence/letter.txt was correctly synced. But, the hardlink to /Users/bellett/correspondence/letter.txt was no longer there. In other words, /Users/bellett/projects/correspondence/letter.txt was identical to /Users/aellett/projects/correspondence/letter.txt but it differed from /Users/bellett/correspondence/letter.txt. Since these two files were hard linked on both computers, I expected them to still have the hard link. Why are my hard links not being preserved?

  Read the article

• SYS-5016T-MTFB will not POST without manual assistance (Motherboard: X8STi-F)

  - by Dan

  I have a Supermicro 5016T-MTFB 1U server which I am in the process of setting up, but it has a really strange problem. When the system is powered on it will not POST until I press the reset button a few times, followed by pressing the delete key on the keyboard to "wake it up". If I power it on and do nothing, the fans spin up but nothing else happens at all. After pressing the reset button once, the red "overheat" light comes on and blinks which is supposed to indicate a fan failure - but all the fans are working. Pressing reset again usually stops the blinking, and the system starts the normal POST routine but it will not actually get to the bios screen unless I press delete. If I don't press delete, it just continues to hang. After pressing delete it will take me into the bios setup screen, if I exit without saving changes I can boot the system normally. I was able to successfully install Linux with no trouble...but upon rebooting the same problem happened again. This board has integrated IPMI which I thought was the problem, so I disabled it via the jumper on the board. Did not help. Each time this system powers on, it goes on for a second, then turns off again for another second, then turns back on again. I don't know why it does that. Here is what I put in the system: 1 x Xeon E5630 (Nehalem) 80W TDP (it's not overheating, CPU temps stay under 40 degrees C) 2 x Kingston 2GB x 3 DDR3-1066 Memory ECC, unbuffered, unregistered (kvr1066d3e7sk3/6g) 1 x Intel X25-M 160 GB 2 x Western Digital RE3 1TB

  Read the article

• Freebsd Secondary Group not allowing folder deletion

  - by Jarrod Juleff

  TLDR: I have a user that is a member to a group as a secondary group. This user can delete files with 664 perms as a secondary user, but not directories with perms of 775. Details: I have a user. Lets call him ftpuser. I use him to upload and download files to my devbox. The user's primary group is "ftp" and is also in the group "www" as a secondary group. My web server runs as user www and group www, and I have proftpd (running as www and www) configured to drop all files into the needed directories as www and www (for file ownership) and perms 664 on files and 775 on directories. My problem is (tried with 2 ftp clients) the ftp client can delete the files, but not the folders. Filezilla returns 550 permission denied. The owner only can delete flag is not set, and I've triple checked the permissions and they are indeed 775. Its driving me nuts to have to log into my server to manually delete folders every time. Some of the folders and files are created by 1 of my php scripts, but the permissions are getting set properly when I check the files' properties. Directory and file creation works phenomenal. Can delete files, just not directories. Freebsd 9.0 Running in VirtualBox (32bit all the way around) Proftpd (running as www and www) as ftp server (tried using both dreamweaver and filezilla as the clients) Basic amp setup (apache,mysql,and php).

  Read the article

• /etc/crontab or any user crontab is not being executed

  - by ian

  My server is CentOS 5. When I edit /etc/crontab or edit any user(including root) crontab via "crontab -e" command, it just adds "(system) RELOAD (/etc/crontab)" or "(admin) RELOAD (cron/admin)" in the log. No CMD in the /var/log/cron. Sample entry in /var/log/cron: Aug 10 10:21:33 localhost crontab[31688]: (root) BEGIN EDIT (root) Aug 10 10:21:42 localhost crontab[31688]: (root) REPLACE (root) Aug 10 10:21:42 localhost crontab[31688]: (root) END EDIT (root) Aug 10 10:22:01 localhost crond[2688]: (root) RELOAD (cron/root) Result of "service crond status": crond (pid 1345) is running... The command "cat /var/log/messages | grep cron" does not give anything. Contents of /etc/cron.allow: admin root Contents of /etc/crontab: SHELL=/bin/bash PATH=/sbin:/bin:/usr/sbin:/usr/bin MAILTO=root HOME=/ # run-parts 01 * * * * root run-parts /etc/cron.hourly 02 4 * * * root run-parts /etc/cron.daily 22 4 * * 0 root run-parts /etc/cron.weekly 42 4 1 * * root run-parts /etc/cron.monthly * * * * * root run-parts /bin/date >> /data/date.txt Result of ps aux |grep cron: root 1345 0.0 0.1 5268 1204 ? Ss 11:43 0:00 crond Contents of admin's crontab: * * * * * /bin/date >> /data/date.txt Note that it's not only admin's crontab that's not running. All cron jobs are not running. Any ideas why they aren't running?

  Read the article

• HP Officejet 4500 G510n-z Not Showing up in Remote Desktop (Terminal Services)

  - by Greg_the_Ant

  I installed this printer on a windows XP machine. First using the wireless option, and later using USB. In both cases when I connect to my other computer (also Windows XP) via terminal services and check printers in the local resources tab it does not show up on the remote session. I used to have a Samsung connected to my local computer over USB and and that worked fine over terminal services. Things I tried so far: I did read this page and installed the software fix on both computers: (Printers that use ports that do not begin with...) I installed the minimum HP software install on the remote computer and that didn't help either. I also tried running the add new printer wizard on the remote computer: I selected "local printer attached to this computer" and did not check the "automatically.." option. On the next page of the wizard I can select an option for "use the following port". I see options for TS001 through TS009 there. I'm assuming those are coming from the local machine. I tried clicking each one and then checking "have disk" and pointing it to C:\3be8dc611b11322e8ddf8a67\i386\msxpsdrv.inf 1 but for every single TS00.. port it says "The specified location does not contain information about your hardware." Any help would be greatly appreciated. I'm pretty stuck at this point. 1 C:\3be8dc611b11322e8ddf8a67 is the folder I extracted the HP driver software to after I downloaded it.

  Read the article

• Lotus Domino - DAOS not reducing file size?

  - by SydxPages

  I have implemented DAOS on a Lotus Domino Server (8.5.3 FP2) as follows: Lotus Domino Server Document: Store file attachments in DAOS: Enabled Minimum size of object before Domino will store in DAOS: 64000 bytes DAOS base path: E:\DAOS Defer object deletion for: 30 days Transaction logging is running, and the specific test database has the following advanced properties set: Domino Attachment and Object Service (ticked) Use LZ1 compression for atachments Compress Database Design Compress Data I have restarted the server. When I run a compact -c, it compacts the database, but does not reduce the size. I have checked the DB in Windows Explorer (60Gb) and the size is the same pre and post. I have checked the directory (E:\DAOS) and it is 35Gb in size. When I run the command 'Tell DAOSMgr Status tmp\test.nsf', I get the following response. From looking up on the net, I believe ticket count = 0 means that the db is not really DAOS'ed? Admin Process: Searching Administration Requests database DAOSMGR: Status tmptest.nsf started DAOS database status: Database: E:\Lotus\Domino\Data\tmp\test.nsf Database state = Synchronized Last resynchronized: 03/09/2012 02:49:13 PM Ticket count: 0 DAOSMGR: Status tmp\test.nsf completed I have run fixup on the database. When I have tried to run the DAOS estimator it has always crashed. This was a problem with larger databases on earlier versions of domino, but not anymore. Can anyone tell me why the size has not reduced? Am I missing anything?

  Read the article

• GMail and Yahoo Mail servers not accepting mails from my slicehost slice

  - by Lakshmanan

  Hi, I have a rails in one of the slices at Slicehost. I've setup postfix (sendmail) to send emails from my rails app. All emails to Google Apps domain (to company setup google hosted paid email id) are getting delivered properly (but to spam folder). But all emails to [email protected], [email protected], .. @hotmail.com are not getting delivered and this is the line from my /var/log/mail.log Dec 21 17:33:56 staging postfix/smtp[32295]: 5EB4810545B: to=<[email protected]>, relay=j.mx.mail.yahoo.com[66.94.237.64]:25, delay=1.6, delays=0.02/0.01/1.5/0, dsn=4.0.0, status=deferred (host j.mx.mail.yahoo.com[66.94.237.64] refused to talk to me: 553 Mail from 173.203.201.186 not allowed - 5.7.1 [BL21] Connections not accepted from IP addresses on Spamhaus PBL; see http://postmaster.yahoo.com/errors/550-bl21.html [550]) and this is what i got for gmail Dec 21 17:29:17 staging postfix/smtp[32216]: 0FA3310545B: to=<[email protected]>, relay=gmail-smtp-in.l.google.com[74.125.65.27]:25, delay=0.59, delays=0.02/0.01/0.09/0.47, dsn=5.7.1, status=bounced (host gmail-smtp-in.l.google.com[74.125.65.27] said: 550-5.7.1 [173.203.201.186] The IP you're using to send mail is not authorized 550-5.7.1 to send email directly to our servers. Please use the SMTP relay at 550-5.7.1 your service provider instead. Learn more at 550 5.7.1 http://mail.google.com/support/bin/answer.py?answer=10336 v49si11176750yhc.16 (in reply to end of DATA command)) Please help. I have very little knowledge about setting dns, servers and stuff.

  Read the article

• Postfix does not work after setting server hostname from plesk

  - by Michael

  I have recently set my server hostname from localhost.localdomain to xx.mydomain.com from the plesk control panel. However after doing this change postfix has stopped working, I tried restarting and regenerating the config files but to no avail. I am not familiar with postfix but I believe there is a setting to be changed in main.cf. Here are the relevant errors I receive: postfix/postfix-script: starting the Postfix mail system postfix/master: daemon started -- version 2.8.4, configuration /etc/postfix postfix/cleanup: fatal: host/service localhost/12768 not found: Name or service not known postfix/pickup: warning: maildrop/E5559996219: error writing 4FA2C996217: queue file write error postfix/master: warning: process /usr/libexec/postfix/cleanup pid 15334 exit status 1 postfix/master: warning: /usr/libexec/postfix/cleanup: bad command startup -- throttling Any ideas? EDIT Setting it back to localhost.localdomain makes it work again. The only references to localhost/12768 I can find in main.cf are: smtpd_milters = inet:localhost:12768 non_smtpd_milters = inet:localhost:12768 Should something be changed here? These two lines stay the same when I change the hostname. EDIT If I comment out the two mail filter lines (the ones shown above) and restart, postfix works with the new hostname. However this is obviously not the ideal solution...

  Read the article

• Logmein does not work at home?

  - by Littlet-ENG

  I've been using logmein successfully for may situations and have had very good success. Our company has an Log me in Pro account. I have used this to share my desktop with customers. At work, I have had no problem with my laptop. At home, one program (solid-works) that I need to share with my customers, will not display the active screen. I spent 45 min on the phone with both the software for the cad system and logmein support with not help. I need help in narrowing down what the problem is on my computer. The support guys at Solid-works got another remote software to work, so its not the program. I can get the logmein to work at the office so its not the settings of the logmein pro account. The LMI people say its a setting on my computer.? -internet is fast enough at home -can't narrow down the problem -changed graphical settings and that didn't work. Any Suggestions?

  Read the article

• Dos/ Flood Lag even though Port not Saturated

  - by Asad Moeen

  My GameServers had been under some UDP Floods due to which they generated outputs to the attacker which gave the GameServers some huge lags. Thanks to friends at ServerFault that upon different kind of testing, I was able to successfully block the attack. My question is actually something else but it is important to know how the GameServers reacted to the attack and if the machine kept stable or not: 300kb/s Input would cause GameServer to generate 2mb/s Output. So as the Input Rate kept increasing, output rate would reach so high that it would no longer be possible for the GameServer to control it and hence it would give a huge Lag until the attack is stopped. Usually the game server starts to lag when it sends out something greater than 5mb/s and under that is controllable. Theoretically, I was able to receive a 60mb/s output from my GameServer on inputting 10mb/s. Its just the way the GameServer works if not protected. Now on some of my machines, only the GameServer under attack lagged and although the server was generating 60mb/s output, rest of the gameservers on other ports would run fine without lags on the same machine. But there was another machine which also runs on a 100 MBPS Network port, even 1 mbps input ( and ZERO output because attack is blocked ) even on an unused port would give a constant yellow line ( on the Lag-o-Meter ) to all the clients on all GameServers indicating lag because that line is actually blue under normal conditions. It would remain the same even on 50mbps or 900mbps input. I tried contacting the host about it because I believe its the way their Network is bridged, but they can't help me about it. Anyone else knowing about such issues because if 900mbps input does not Saturate the port, how can 1mbps input lag the servers although port is not saturated and enough bandwidth is available?

  Read the article

• Can not access SQLServer database

  - by btrey

  I'm trying to convert an Access database to use a SQLServer backend. I've upsized the database and everything works on the server, but I'm unable to access it remotely. I'm running SQLServer Express 2005 on Windows Server 2003. The server is not configured as a domain controller, nor connected to a domain. The computers I'm trying to access the server from are part of a domain, but there are no local domain controllers. I'm at a remote location and the computers are configured and connected to the domain at the home office, then shipped to us. We normally log in with cached credentials and VPN into the home office when we need to access the domain. I can use Remote Desktop Connection to access the 2k3 server which is running SQLServer. If I log into the server with my username, I can bring up the database, access it via the Trusted Connection, and the database works. If I try to run the database locally, however, I get the Server Login dialog box. I can not use a Trusted Connection because my local login is to the home office domain and is not recognized by the SQLServer machine. If I try to use the username/password that is local to the SQLServer, I get a login failed error. I've tried entering the username as "username", "workgroup/username" (where "workgroup" is the name of the workgroup on the SQLServer), "sqlservername/username" and "[email protected]" where "1.2.3.4" is the IP of the SQLServer. In all cases, I get a login failed error. As I said, I can login to the server via Remote Desktop Connection with the same username and password and use the database, so permissions for the username appear to be correct for both a remote connection and for database access. Not sure where to go from here and any assistance would be appreciated.

  Read the article

• Coffee spilled and went inside CPU...computer not starting

  - by Harpreet

  Today coffee got spilled over my table, and some of it (very less) reached the CPU placed under the table. I think little bit of it got inside the CPU through the front face of the CPU. As that happened the fan started running very fast and made noise. I tried to restart to see if it becomes fine, but the computer didn't start again. First it gave an error of "Alert! Air temperature sensor not detected" and didn't start. Next I tried again multiple times of starting the computer but then it gave some memory error. I was not able to start the computer. Incase there's a problem in hard disk or something related to memory, is there any way we can extract our work or data? I am scared if I am not able to extract my work in case some problem occurs like that. What options would I have? Help! EDIT: I have attached the photo here and you can see the area spilt in red circle. The hard drive electronics have been affected and internal speaker may also have been affected. Any advise on cleaning and if hard drive can work? EDIT 2: Are there any professional services offered to extract data from blemished hard disk, like this one, in case I am not able to run it personally?

  Read the article

• Oracle 10g for Windows does not start up on system boot

  - by Mike Dimmick

  We have an Oracle 10g Enterprise Edition installation (10.2.0.1.0) on a Windows Server 2003 virtual machine. It was initially created with Virtual Server 2005 R2 SP1 but has now been migrated to Windows Server 2008 Hyper-V. The services start on system boot, but the instance does not start up. This problem was actually occurring on Virtual Server after a migration from one server to another, but I managed to fix it then with: oradim -edit -sid ORCL -startmode auto However, this now has no effect. oradim.log (in %OracleHome%\database\oradim.log) says: Thu Jun 10 14:14:48 2010 C:\oracle\product\10.2.0\db_3\bin\oradim.exe -startup -sid orcl -usrpwd * -log oradim.log -nocheck 0 Thu Jun 10 14:14:48 2010 ORA-12560: TNS:protocol adapter error sqlnet.log in the same folder has: Fatal NI connect error 12560, connecting to: (DESCRIPTION=(ADDRESS=(PROTOCOL=BEQ)(PROGRAM=oracle)(ARGV0=oracleorcl)(ARGS='(DESCRIPTION=(LOCAL=YES)(ADDRESS=(PROTOCOL=beq)))'))(CONNECT_DATA=(SID=orcl)(CID=(PROGRAM=C:\oracle\product\10.2.0\db_3\bin\oradim.exe)(HOST=ORACLE-VM)(USER=SYSTEM)))) VERSION INFORMATION: TNS for 32-bit Windows: Version 10.2.0.1.0 - Production Oracle Bequeath NT Protocol Adapter for 32-bit Windows: Version 10.2.0.1.0 - Production Time: 10-JUN-2010 14:14:48 Tracing not turned on. Tns error struct: ns main err code: 12560 TNS-12560: TNS:protocol adapter error ns secondary err code: 0 nt main err code: 530 TNS-00530: Protocol adapter error nt secondary err code: 2 nt OS err code: 0 The ORA_ORCL_AUTOSTART registry value is set to TRUE, so it should be auto-starting - and you can see that it's trying to. The problem also occurs when stopping and restarting the OracleServiceORCL service. I've enabled SQL*Net tracing which shows: [10-JUN-2010 15:09:33.919] snlpcss: entry [10-JUN-2010 15:09:34.419] snlpcss: Unable to spawn Oracle oracle (DESCRIPTION=(LOCAL=YES)(ADDRESS=(PROTOCOL=beq))) orcl, error 2. [10-JUN-2010 15:09:34.419] snlpcall: exit On a hunch that error 2 is Windows error 2 (file not found) I tried restarting the service with Process Monitor watching oradim.exe, but this appears to delay things just enough that it always works. Right now I have a horrible hack where I've created a Scheduled Task to run oradim -startup -sid ORCL when the Administrator account logs on, and set the VM to auto-logon. I'd still like to work out why it's not working.

  Read the article

• ESXi 4.1 host not recognising existing VMFS datastore

  - by ThatGraemeGuy

  Existing setup: host1 and host2, ESX 4.0, 2 HBAs each. lun1 and lun2, 2 LUNs belonging to the same RAID set (my terminology might be sketchy here). This has been working just fine all along. I added host3, ESXi 4.1, 2 HBAs. If I view Configuration / Storage Adapters, I can see that both HBAs see both LUNs, but if I view Configuration / Storage, I only see 1 datastore. host1/2 can see both LUNs and I have VMs running on both too. I have rescanned, refreshed and even rebooted, but host3 refuses to acknowledge 1 of the datastores. Does anyone know what's going on? Update: I re-installed the host with ESX (not i) 4.0, same version as the existing hosts and it's still not recognising the vmfs. I think I'm going to SVmotion everything off that datastore then format it. Update2: I've created the LUN from scratch and the problem gets even weirder. I've presented the LUN to all 3 hosts, and I can see the LUN in the vSphere client's Configuration / Storage Adapters section on all 3 hosts. If I create a datastore on the LUN via the Configuration / Storage section on host1, it works fine and I can create an empty folder via datastore browser, but the datastore is not seen by the host2 and host3. I can use the Add Storage wizard on host2 and it will see the LUN. At this point the "VMFS Label" column has the label I gave with "(head)" appended. If I try the Add Storage wizard's "Keep the existing signature" option, it fails with an error "Cannot change the host configuration." and a dialog box that says 'Call "HostStorageSystem.ResolveMultipleUnresolvedVmfsVolumes" for object "storageSystem-17" on vCenter Server "vcenter.company.local" failed.' If I try the Add Storage wizard's "Assign a new signature" option on host2, it will complete and the VMFS label will have "snap-(hexnumber)-" prepended. At this point its also visible on host3, but not host1. I have a similar setup in a different datacenter which didn't give me all this trouble.

  Read the article

• SSD Drive not being recongized in BIOS

  - by chobo2

  Well I bought my first drive Mushkin Chronos 180GB and got it installed in my computer and loaded up. I went to windows 7 and initialized the drive and then I installed "SSDlife Free" and loaded it up and my the SSD drive came up said it was "powered on 3 times"(thought it was odd but then thought maybe some testing???). I then restarted my computer and loaded into Acronis. Went to my SSD drive and make a partition called windows(made a basic logical partition). I then loaded up Norton ghost and wanted to copy my current windows onto the SSD drive on the partition I made found out I could not do it through the recovery disk so I made a backup of my windows drive and wanted to then restore it onto the SSD drive. Came back an hour later when the backup was done. I tried to restore the it on my SSD drive and could not find the partition so I loaded up Acronis again and it did not see it. I then went to the bios and saw only my other hard drive. What I tried Tried uplugging and replugging in both sata and power cables. Tried using the power and sata cable from the working drive and giving it the ones that SSD drive were using. Tried Sata AHCI Mode (Intel ICH9 Southbridge) Tried SATA PORT0-1 NATIVE MODE (Intel ICH9 Southbridge) Nothing worked. Software / hardware Windows 7 ultimate Gigabyte S-Series GA-P35-DS3L Mother board I hope someone has some ideas on why it is not being recognized.

  Read the article

• 530 5.7.1 Client was not authenticated Exchange 2010 for some computers within mask

  - by user1636309

  We have a classic problem with Client not Authenticated but with a specific twist: We have an Exchange 2010 cluster, let's say EX01 and EX02, the connection is always to smtp.acme.com, then it is switched through load balancer. We have an application server, call it APP01 There are clients connected to the APP01. There is a need for anonymous mail relay from both clients and APP01. The Anonymous Users setting of the Exchange is DISABLED, but the specific computers - APP01 and clients by the mask, let's say, 192.168.2.* - are enabled. For internal relay, a "Send Connector" is created, and then the above IP addresses are added for the connector to allow computers, servers, or any other device such as a copy machine to use the exchange server to relay email to recipients. The problem is that the relay works for APP01 and some clients, but not others (we get "Client not Authenticated") - all inside the same network and the same mask. This is basically what we do to test it outside of our application: http://smtp25.blogspot.sk/2009/04/530-571-client-was-not-authenticated.html So, I am looking for ideas: What can be the reason for such a strange behaviour? Where I can see the trace of what's going on at the Exchange side?

  Read the article

• .htaccess redirect to error page if port is not 80

  - by Momo

  I'm running a portable server through usb stick. The thing is I also have WAMP installed in my local machine and Apache somehow gets started on windows startup, because of some random reason which I don't recall now and it can't be changed. I want to prepare my portable server in situations like this, so closing httpd.exe from process and starting my portable server is not an option. Anyway, because of already active httpd.exe my portable server's WordPress site can only be accessed through localhost:81 - this is a problem as WP site is very dependent on the URL and I don't want to include the url with port on WP database. Here is what I want to do through .htaccess: On any path except for error.php file check if not port 80 If not port 80 redirect to /error.php?code=port It it possible for it to have priority over WP redirection or URL handling? In the error.php I provided info on how to manually close httpd.exe and such so my family and friends can access the portable site. It's sort of like a gallery and calender application for events and other such stuff... Please help? I'm I can't figure it out at all. I know others may not have apache already running, but I want to prepare for such a situation. Something like the following, but the following doesn't work. # BEGIN WordPress <IfModule mod_rewrite.c> <If "%{SERVER_PORT} = 80"> RewriteEngine On RewriteBase / RewriteRule ^index\.php$ - [L] RewriteCond %{REQUEST_FILENAME} !-f RewriteCond %{REQUEST_FILENAME} !-d RewriteRule . /index.php [L] </If> <Else> RewriteEngine On RewriteRule ^(error.php)($|/) - [L] RewriteRule ^(.*)$ /error.php?code=port [L] </Else> </IfModule> # END WordPress By the way, the portable server Server2Go automatically generates vhosts based o the hostname set on it's config file and changes ports if the port (e.g. 80) is already open.

  Read the article

• Hugepages not utilized by MySQL 5.0, CentOS 5

  - by TechZilla

  I've set up Hugepages, but i'm not seeing any of them reserved. Have I missed a step, or for some particular reason, is MySQL is unable to utilize the Hugepages? I have not created a mount of hugetlbfs, although from what I read, MySQL would not call pages in such a manner. If I'm wrong, please let me know, as that would be a trivial solution. Almost all my MySQL tables are using InnoDB. NOTE: I created a hugetlbfs, no change as expected. Is it possible that rebooting would rectify this situation? I would not want to go through the procedure, as this is high availability, but would do so if necessary. This is the configurations, which I believe are relevant. /etc/sysctl.conf ... ## Huge Pages vm.nr_hugepages = 4096 vm.hugetlb_shm_group = 27 ## SHM kernel.shmmax = 34359738368 kernel.shmall = 8589934592 ... /etc/security/limits.conf ... mysql soft nofile 12888 mysql hard nofile 51552 @mysql soft memlock unlimited @mysql hard memlock unlimited /etc/my.cnf [mysqld] large-pages ... grep Huge /proc/meminfo HugePages_Total: 4096 HugePages_Free: 4096 HugePages_Rsvd: 0 Hugepagesize: 2048 kB id mysql uid=27(mysql) gid=27(mysql) groups=27(mysql) context=root:system_r:unconfined_t:SystemLow-SystemHigh tail -6 /var/log/mysqld.log InnoDB: HugeTLB: Warning: Failed to allocate 1342193664 bytes. errno 12 InnoDB HugeTLB: Warning: Using conventional memory pool 120808 15:49:25 InnoDB: Started; log sequence number 0 1729804158 120808 15:49:25 [Note] /usr/libexec/mysqld: ready for connections. Version: '5.0.95' socket: '/var/lib/mysql/mysql.sock' port: 3306 Source distribution I would really appreciate any help, I'm completely out of ideas. If I missed any more relevant configs, or diagnostics, please comment and I'll add it to the question.

  Read the article

• Router not connecting to the internet

  - by Peter

  I had a weird problem this morning with my router - it's an Alice Gate VoIP 2 Plus WI-FI - not connecting to the internet after more or less 1 hour online (I'm always connected with the ethernet cable). The led status lights for Power, WI-FI, ADSL, Internet, Service should be on in order to be connected and navigate online. The problem was that the leds ADSL, Internet were off and I did not know why because it never happened before. I looked at the stats in the settings and the numbers for Bytes/Packages for both Sent/Received were there and increasing but I couldn't connect to the internet. I called tech support, they checked and told me to keep the router on for 48 hours because they were checking it. I've reset it twice before and after I called tech support and it still did not work so after about 2 hours of waiting I tried connecting using WI-FI and the leds 'magically' turned on, first the ADSL and Internet(Internet led always turns on last). At this point I'm curious what could of caused this and I'm doubting that the tech-support guys did something. What could of been the problem with the ethernet cable not connecting in the first place? It always works. What do the tech support guys normally do when they tell me to keep the router on so they can 'check it'? PS: I'm using ubuntu 32 bit

  Read the article

• Firefox will not remember local site cookie

  - by Campo

  This is a weird one. We have a production server (Server 2008) and two staging servers (Server 2008 and Server 2003) I have sites on all of these. They all use cookies. On the Production server when browsing to our site www.supernovainteractive.com there is a cookie that detects when you visted the site and it will not refresh the logo animation (top left hand side) on clicking to another page. This works for all browsers on the production server. I’m not sure what’s going on but for some reason cookies are not working on one site in the 2008 staging server only. This is when browsing using Firefox (3.6.3) they work fine on all other browsers (IE, Chrome, Safari, Opera) In addition, the 2003 staging server works fine. You can test on the Supernova Interactive site by noticing the logo in the top left corner. It uses a cookie to detect if you’ve already seen the animation. Once you’ve seen it once, it doesn’t animate again until tomorrow. Currently, it’s animating every time. I have opened an outside facing port so others can see the issue. Http://exchange.supernova.com:10009 Any ideas on this one? Firewalls are off on the server. Notice you do not get a cookie from Exchange.supernova.com.

  Read the article

• Ping and crawling not working, site still resolving

  - by Andrew Alexander

  Ok, so we're trying to figure out why the site of one of our clients isn't being crawled by Google (we've ruled out robots.txt or meta tags) When we go to the site, either IP address or domain name, the site resolves, everything works. However, Google is getting a 302 redirect (which it apparently isn't following for crawling), and when we ping the address, it times out (note, the site is still resolving in the browser throughout all of this). The site is built in ASP.Net (I assume C#) and so my thoughts were that it was an errant redirect rule, or some other sort of server side issue. We also thought that it might be due to incorrect domain pointing (but if we try to ping the IP, it doesn't work, so that sorta rules that out). We're really not sure what is causing all of these errors, or even if they have one single source. Anyone have any ideas what could be going on? Do you need any more information? To boil it down in a TL; dr: * Site resolving in browser, both IP and domain name. No problems here. * Site not being crawled by Google (gets a 302 it doesn't seem to follow) - it is not due to robots.txt or meta tags * Ping is not working for the IP address. This is very odd, because again, the IP address seems to work fine in the browser. * Our thoughts are either redirect rule issue, domain pointing issue, or possibly some errant code - or some combination of the three

  Read the article

< Previous Page | 118 119 120 121 122 123 124 125 126 127 128 129  | Next Page >