Search Results

Search found 17129 results on 686 pages for 'wifi configuration'.

Page 122/686 | < Previous Page | 118 119 120 121 122 123 124 125 126 127 128 129  | Next Page >

• Wireless switch on Dell XT2 - strange behaviour of rfkill

  - by DyP

  I have an Dell Latitude XT2 using an Intel WLAN card (lspci lists it as "Intel Corporation Ultimate N WiFi Link 5300") running Lubuntu 12.04 with recent updates. The laptop has a hardware WLAN switch. I have problems activating the WLAN when booting with the hardware switch set to "off". The situation is a bit confusing, unfortunately. rfkill lists two WLAN devices (though lspci only shows the Intel one). This is the situation when booting with the hardware switch set to "Off": 0: dell-wifi: Wireless LAN Soft blocked: yes Hard blocked: yes 1: dell-bluetooth: Bluetooth Soft blocked: yes Hard blocked: yes 2: phy0: Wireless LAN Soft blocked: yes Hard blocked: yes From some tests, I conclude WLAN is only activated when both, the dell-wifi and phy0, are unblocked by soft- and hardware. But I can only unblock dell-wifi after the hardware switch is set to "on". Procedure right from boot with hardware switch set to "Off": Soft-unblocking phy0 works as expected. Could be done by start-up script. sudo rfkill unblock 0: nothing happens. Soft block of dell-wifi not removed. Set the hardware switch to "on": phy0 gets its hard block removed. Still no WLAN. sudo rfkill unblock 0: both the soft and hard lock of dell-wifi are removed. WLAN is now active and works. sudo rfkill block 0: only adds the soft block as expected. WLAN goes off again. So, in order to activate WLAN, I have to use the hardware switch and afterwards (manually) run a script - that's a bit inconvenient. Does someone know a better solution? Maybe a daemon could help that listens to rfkill events to unblock dell-wifi after I have set the hardware switch to "on"? (sounds like another workaround) When booting with the hardware switch set to "On", nothing is blocked neither hard nor soft.

  Read the article

• How to enable a Web portal-based rich enterprise platform on different domains and hosts using JS without customization/ server configuration

  - by S.Jalali

  Our company Coscend has built a Web portal-based communications and cloud collaboration platform by using JavaScript (JS), which is embedded in HTML5 and formatted with CSS3. Other technologies used in the core code include Flash, Flex, PostgreSQL and MySQL. Our team would like to host this platform on five different Windows and Linux environments that run different types of Web servers such as IIS and Apache. Technical challenge: Each of these Windows and Linux servers have a different host name and domain name (and IP address), but we would like to keep our enterprise platform independent of host server configuration. Possible approach to solution: We think an API (interface module with a GUI) is needed to accomplish this level of modularity and flexibility while deploying at our enterprise customers. Seeking your insights: In this context, our team would appreciate your guidance on: Is there an algorithmic method to implement this Web portal-based platform in these Windows and Linux environments while separating it from server configuration, i.e., customizing the host name, domain name and IP address for each individual instance? For example, would it be suitable to create some JS variables / objects for host name and domain name and call them in the different implementations? If a reference to the host/domain names occurs on hundreds of portal modules, these variables or JS objects would replace that. If so, what is the best way to make these object modules written in JS portable and re-usable across different environments and instances for enterprise customers? Here is an example of the implemented code for the said platform. The following Web site (www.CoscendCommunications.com) was built using this enterprise collaboration platform and has the base code examples of the platform. This Web site is domain-specific. We like to make the underlying platform such that it is domain and host-independent. This will allow the underlying platform to be deployed in multiple instances of our enterprise customers.

  Read the article

• Erlang: How do you reload an application env configuration?

  - by mwt

  How do you reload an application's configuration? Or, what are good strategies for managing dynamic application configuration? For example, let's say I had log levels and I wanted to change them at runtime. Also, let's assume this is one of many such options. Does it make sense to have a "configuration server" that holds configuration state for other parts of the application to query? Do people do that or did I just make it up?

  Read the article

• Correct Display configuration. Errors while trying to arrange displays

  - by David Russell Parrish Bojrquez

  I am trying to set up my tv with my laptop trough a VGA cable. The display application in Ubuntu throws a lot of errors to me and I have given up in trying to do it myself. I try to apply the 1920 1080 display. The selected configuration for displays could not be applied Requested size (3200, 1080) exceeds 3D hardware limit (2048, 2048). You must either rearrange the displays so that they fit within a (2048, 2048) square or select the Ubuntu 2D session at login. And Also this: Failed to apply configuration: %s GDBus.Error:org.gtk.GDBus.UnmappedGError.Quark._gnome_2drr_2derror_2dquark.Code3: Requested size (3200, 1080) exceeds 3D hardware limit (2048, 2048). You must either rearrange the displays so that they fit within a (2048, 2048) square or select the Ubuntu 2D session at login. Please Help. @Leozitop No I don't see anything when connected to 1920 1080 because the setup fails before actually applying. Yes there are other resolutions which do work. I believe the problem has something to do with the rotation it is set up. My Ubuntu Display application has only clockwise and counterclockwise options for the TV display. I really don't know why this is happening. Basic procedure: Plug in cable, did not get the resolution I wanted. Changed settings, applied them. Re-peat until desired display is shown. I'm not a computer illiterate, really it baffles me that this is happening. Output of xrandr: david@LapUbuntu:~$ xrandr Screen 0: minimum 320 x 200, current 1880 x 800, maximum 4096 x 4096 LVDS1 connected 1280x800+0+0 (normal left inverted right x axis y axis) 331mm x 207mm 1280x800 60.0*+ 1024x768 60.0 800x600 60.3 56.2 640x480 59.9 VGA1 connected 600x800+1280+0 left (normal left inverted right x axis y axis) 1600mm x 900mm 1920x1080 60.0 + 1280x1024 60.0 1360x768 60.0 1280x720 60.0 1024x768 60.0 800x600 60.3* 640x480 60.0 TV1 unknown connection (normal left inverted right x axis y axis) 848x480 59.9 + 640x480 59.9 + 1024x768 59.9 800x600 59.9 Note that VGA says left and indeed it is, but no other option was available in the display. Also, note the TV1 unknown connection which I have no idea what it is. Note, also, that this has nothing to do with the display since W7 on the computer works fine and since while boot up, and also, before starting session in ubuntu the rotation is normal. I'll also mention that I HAVE re-installed Ubuntu since I had posted this question from a Live CD of 12.04 LTS. And that before the posting of the question also using 12.04 before another backup that I had to do, the VGA setup was fine without any problems.

  Read the article

• What do you think of the EntLib 5.0 configuration tool?

  Hello again! Its been a while, I know. Ive been busy over the last few months with several projects, some of them software related, and one of them human my son Jesse was born on 26 February 2010. Fun times! Meanwhile, back in Redmond, the p&p team has been busy working on Enterprise Library 5.0 see Grigoris announcement for details on the beta. Theres a ton of new stuff in this release, but theres one big new feature that hasnt received a lot of attention that Im keen to hear your perspectives on. The change is the biggest overhaul to the configuration tool since Enterprise Library was launched. If you havent yet grabbed the EntLib 5.0 beta, heres a before and after shot of the config tool: Enterprise Library 4.1 config tool Enterprise Library 5.0 (beta 1) config tool The tool has been rebuilt from the ground up in response to some feedback and usability studies from the previous version of the tool. But is this a step in the right direction? Id love to hear what you think. If youve downloaded EntLib 5.0 and tried out the tool, please share your thoughts on: First impressions. Is the tool easy to understand? Easy to find what youre looking for? Easy to read existing configuration? Pretty? Ease of use for real life tasks. Rather than make up your own tasks, here are a few sample scenarios you might want to try: Configure the data access block with a SQL Server connection called Audit that points to a database called Audit on a server called DB Configure the logging block so that any log entries in the Audit category are written to both the Event Log and the Audit database (see above) Configure the validation block with a ruleset called Email Address that uses an appropriate regular expression for e-mail addresses Configure the policy injection block such that any calls to classes in the MyCompany.Security namespace are logged before and after the call using the Audit category (see above) Comparison with the old config tool. What do you like better in the new tool? What did you like better in the old tool? How do you rate your level of expertise using the old tool? Keep in mind that I no longer work in the p&p team, so I cant say how any of this feedback will be used (although Im sure the team is listening!). However since Ive invested so much time in Enterprise Library, both in leading the team and using the product on real projects Im very interested to hear what you all think of the tools new direction.Did you know that DotNetSlackers also publishes .net articles written by top known .net Authors? We already have over 80 articles in several categories including Silverlight. Take a look: here.

  Read the article

• Configuration et utilisation de l'agent de récupération de clés avec la PKI de Windows Server 2008 R

  Configuration et utilisation de l'agent de récupération de clés avec la PKI 2008 R2, par Michaël Todorovic Citation: Cet article va vous permettre de configurer l'agent de récupération de clés de la PKI de Windows Server 2008 R2. Vous pouvez donner votre avis sur cet article en répondant à cette discussion et lui donner une note en notant la discussion. ...

  Read the article

• Qt et Zeroconf, ou l'utilisation de services réseau sans configuration, un article de Trenton Schulz traduit par charlespf

  Bonjour est l'implémentation d'Apple concernant le réseau sans configuration (Zeroconf), grâce auquel plusieurs applications offrent leurs services à un réseau local. Utiliser Bonjour simplifie grandement la découverte et l'utilisation des services réseau. Dans cet article, on créera des objets Qt pour manipuler les différentes parties de Bonjour et ensuite on les utilisera dans des exemples d'applications réseau avec Qt.

  Read the article

• why there is a lot change in the hardware support features in different linux os?

  - by TrazerWalker

  i am using lenovo b460 with 3 GB ram and 500 GB hard disk,(no graphics card). when i live boot Linux mint i was able to connect to WiFi.but when i booted up Ubuntu 11.4 i was not able to connect through WiFi.then later i installed Ubuntu 12.4 and then i got connected with WiFi, but after installing icons and themes through my unity i am not able to view the content in the terminal and the WiFi is also not connecting now even after i changed them all back. wireless connectivity

  Read the article

• How do I create a wifi network bridge with qemu on OS X?

  - by a paid nerd

  I grabbed a small FreeBSD live CD and QEMU, and I'm trying to bridge my Mac OS X 10.8 wifi connection so that the guest OS is available on my LAN. However, the guest OS never gets a DHCP lease. This works perfectly with VirtualBox in their "bridged" network mode, so I know it can be done. I need to get it working with QEMU because VirtualBox doesn't support the architecture that I need for this project. Here's what I've done so far based on hours of googling: Installed TUNTAP for OS X Told OS X to supposedly forward all packets, even ARP: (NOTE: This doesn't appear to work.) $ sudo sysctl -w net.inet.ip.forwarding=1 $ sudo sysctl -w net.link.ether.inet.proxyall=1 $ sudo sysctl -w net.inet.ip.fw.enable=1 Created a bridge: $ sudo ifconfig bridge0 create $ sudo ifconfig bridge0 addm en0 addm tap0 $ sudo ifconfig bridge0 up $ ifconfig bridge0: flags=8863<UP,BROADCAST,SMART,RUNNING,SIMPLEX,MULTICAST> mtu 1500 ether ac:de:xx:xx:xx:xx Configuration: priority 0 hellotime 0 fwddelay 0 maxage 0 ipfilter disabled flags 0x2 member: en0 flags=3<LEARNING,DISCOVER> port 4 priority 0 path cost 0 member: tap0 flags=3<LEARNING,DISCOVER> port 8 priority 0 path cost 0 tap0: flags=8943<UP,BROADCAST,RUNNING,PROMISC,SIMPLEX,MULTICAST> mtu 1500 ether ca:3d:xx:xx:xx:xx open (pid 88244) Started tcpdump with -I in the hopes that it enables promiscuous mode on the wifi device: $ sudo tcpdump -In -i en0 Run QEMU using the bridged network instructions: $ qemu-system-x86_64 -cdrom mfsbsd-9.2-RELEASE-amd64.iso -m 1024 \ -boot d -net nic -net tap,ifname=tap0,script=no,downscript=no But the guest system never gets a DHCP lease: If I tcpdump -ni tap0, I see lots of traffic from the wireless network. But if I tcpdump -ni en0, I don't see any DHCP traffic from the QEMU guest OS. Any ideas? Update 1: I tried sudo defaults write "/Library/Preferences/SystemConfiguration/com.apple.Boot" "Kernel Flags" "net.inet.ip.scopedroute=0" and rebooting per this mailing list suggestion, but this didn't help. In fact, it made VirtualBox bridged mode stop working.

  Read the article

• why would resetting the Netgear N300 router fix my Win 7 laptop's slow wifi?

  - by rjnagle

  In the past day the wifi download speeds of my Win 7 HP 64 bit laptop have slowed considerably. I am trying to troubleshoot the problem and to figure out whether it's hardware related (i.e., is the Intel(R) Centrino(R) Wireless-N 2230 the problem?) or router related. I have a Netgear N300 router connected to my modem. I'm using Speedtest to measure my speed. First, during my problem state, my ipad can download and upload at normal speeds. It's only my Win 7 laptop which is having problems. Because my ipad downloads at normal speeds, that would tell me that the problem is specific to the laptop (either HW or SW). But when I restarted my Netgear router, the laptop wifi problems disappeared. That just doesn't make sense. If we know that one device can connect properly to the router, why would a laptop have problems? What are some possible reasons why this might happen? Also, during my problem state, I noticed that on my laptop upload speeds were faster than my download speeds. Anybody have a guess about what might cause upload speeds on one device to be faster than another? Is there any actions i could take (or options to enable) so this problem won't occur. (I initially thought my problem might be software related or memory related -- Norton AV or browser plugins. But even after I disabled everything and made sure memory footprint was minimal, the slowdown was still occurring -- and it solved itself altogether when the router was reset).

  Read the article

• Wifi antenna extension with F-connector/RG-6(RG-59) cable?

  - by rjz2000

  In an older house, the wire mesh in walls surrounding the furnace behave like a Faraday cage and block wifi signals. It is also difficult to lay new cable, however there is television cable to multiple locations due to there once having been a roof-installed, television antenna. It would be relatively trivial to install the wifi router at the center distribution point, then have the antenna broadcasting/receiving the signal plugged in at each of the old television outlets. I assume that it would not be too difficult to find an adapter for SMA <- F-type connectors. The cable is actually RG-59 rather than RG-6, but I assume that it still has relatively good RF isolation along its length, which is no more than a couple hundred feet in any direction. Does anyone know a problem with the idea? Will a router get confused if there is /too little/ interference between the two antenna? Is that length of cable (~100ft) too long for the signal a router broadcasts? I have seen that it is also possible to use old ~$30/each FiOS cable modems available on eBay to extend a network over television cable. However, that seems like a less elegant solution, and might interfere with upnp and dlna services I'd like to have work on a single network. Thanks if anyone has answers or suggestions before I try this project!

  Read the article

• Is there a way to measure wifi traffic on a network from a client?

  - by millimoose

  Is there some way (preferrably one that comes with an existing tool) to measure the traffic going through the whole WiFi network from a computer connected to it? (That is, not from the AP or something between the modem and AP.) My situation is this: a few months back, the internet connection at my parent's place got really sluggish and laggy. (Lag spikes that cause page loads to time out etc, connections plain getting lost and dropping packets forever.) It's impossible to get mom's husband to do anything about this because he brushes this off with something like "just tell your sister to turn off torrents". Unfortunately the WiFi router's firmware doesn't do traffic logging. I'm not going to risk bricking it to put WRT on it; nor am I keen on rewiring the network to add a proxy to analyse the traffic. (I'm one of those people that make computers break just by looking at them, except machines I own.) I'd like to be able to find out roughly how much data is going over the air here while all the LAN wires are out of the router, all the computers accused of torrenting are off, etc. The idea is to either show that: Even if everything but my macbook is turned off, something is congesting the network. The husband is a systems developer and has a whole lot of mysterious hardware that's not to be touched around, one of them might be culprit. There is barely any traffic on the network, but the internet is still sluggish. Meaning this is likely a problem the ISP should solve. (Some hardware of theirs being glitchy, someone on an aggregated line hogging it constantly...) The network is encrypted, but I can temporarily set it to open for the sake of finding this out. So, in conclusion? Can this be done? Or is there some alternative way I could try to diagnose the problem?

  Read the article

• WCF errors in VS 2010/.Net 4 using sample publish/subscribe app from IDesign website

  - by Bill

  I am attempting to compile/run a sample WCF application from Juval Lowy's website (author of Programming WCF Services & founder of IDesign). The application is an example of a publish/subscribe 'traffic-light' application that requires using VS 2010/.Net 4. This is my first attempt at using anything other than VS 2008/Net 3.5. Initially I recieved the following binding error: "Configuration binding extension 'system.serviceModel/bindings/ netOnewayRelayBinding' could not be found." This error appeared to be resolved by amending the .Net 4 machine.config file, to incorporate the following references from the .Net 2 machine.config file. <xml> <bindingElementExtensions> <add name="tcpRelayTransport" type="Microsoft.ServiceBus.Configuration.TcpRelayTransportElement, Microsoft.ServiceBus, Version=1.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35" /> <add name="httpRelayTransport" type="Microsoft.ServiceBus.Configuration.HttpRelayTransportElement, Microsoft.ServiceBus, Version=1.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35" /> <add name="httpsRelayTransport" type="Microsoft.ServiceBus.Configuration.HttpsRelayTransportElement, Microsoft.ServiceBus, Version=1.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35" /> <add name="onewayRelayTransport" type="Microsoft.ServiceBus.Configuration.RelayedOnewayTransportElement, Microsoft.ServiceBus, Version=1.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35" /> <add name="webMessageEncoding" type="System.ServiceModel.Configuration.WebMessageEncodingElement, System.ServiceModel.Web, Version=4.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35"/> <add name="context" type="System.ServiceModel.Configuration.ContextBindingElementExtensionElement, System.ServiceModel, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089"/> <add name="byteStreamMessageEncoding" type="System.ServiceModel.Configuration.ByteStreamMessageEncodingElement, System.ServiceModel.Channels, Version=4.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35"/> <add name="discoveryClient" type="System.ServiceModel.Discovery.Configuration.DiscoveryClientElement, System.ServiceModel.Discovery, Version=4.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35"/> </bindingElementExtensions> <bindingExtensions> <add name="webHttpBinding" type="System.ServiceModel.Configuration.WebHttpBindingCollectionElement, System.ServiceModel.Web, Version=4.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35"/> <add name="basicHttpContextBinding" type="System.ServiceModel.Configuration.BasicHttpContextBindingCollectionElement, System.ServiceModel, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089"/> <add name="basicHttpRelayBinding" type="Microsoft.ServiceBus.Configuration.BasicHttpRelayBindingCollectionElement, Microsoft.ServiceBus, Version=1.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35" /> <add name="webHttpRelayBinding" type="Microsoft.ServiceBus.Configuration.WebHttpRelayBindingCollectionElement, Microsoft.ServiceBus, Version=1.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35" /> <add name="ws2007HttpRelayBinding" type="Microsoft.ServiceBus.Configuration.WS2007HttpRelayBindingCollectionElement, Microsoft.ServiceBus, Version=1.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35" /> <add name="netTcpRelayBinding" type="Microsoft.ServiceBus.Configuration.NetTcpRelayBindingCollectionElement, Microsoft.ServiceBus, Version=1.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35" /> <add name="netOnewayRelayBinding" type="Microsoft.ServiceBus.Configuration.NetOnewayRelayBindingCollectionElement, Microsoft.ServiceBus, Version=1.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35" /> <add name="netEventRelayBinding" type="Microsoft.ServiceBus.Configuration.NetEventRelayBindingCollectionElement, Microsoft.ServiceBus, Version=1.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35"/> <add name="wsHttpContextBinding" type="System.ServiceModel.Configuration.WSHttpContextBindingCollectionElement, System.ServiceModel, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089"/> <add name="netTcpContextBinding" type="System.ServiceModel.Configuration.NetTcpContextBindingCollectionElement, System.ServiceModel, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089"/> </bindingExtensions> Unfortunately running the application results in the following security error: An error occurred creating the configuration section handler for system.serviceModel/client: That assembly does not allow partially trusted callers. (\TrafficLights\TrafficController\bin\Debug\TrafficController.vshost.exe.Config line 4) The sample source code is available for download at the following link: http://www.idesign.net/idesign/DesktopDefault.aspx?tabindex=-1&tabid=19&download=226 I know that Juval's code is not at fault here and that it must be something I'm doing wrong with my VS 2010 configuration. I have not been able to find a solution online. Could someone please steer me in the right direction as to how best to deal with this issue?

  Read the article

• Boot failure : No DEFAULT or UI configuration directive found!

  - by user12378

  I've tried to install Ubuntu on a VMWare Virtual Machine, but it never get's past the bootloader : ISOLINUX 4.01 debian-20100714 ETCD Copyright (C) 1994-2010 H. Peter Anvin et al No DEFAULT or UI configuration directive found! boot: _ I've also tried to burn this .iso image to a CD and go from there - but I got the same problems also ... Some more details : VMWare Server 2.0.2 Build 203138 on Windows 2008 R2 ubuntu-10.10-desktop-i386.iso image used (downloaded yesterday evening) I have no clue, why this is not booting !!! Somebody have any ideas ? Thanks, Sven

  Read the article

• SQL SERVER – Watch Online and Download – Inside of Next Generation SQL Server – Best Practices Analyzer using Microsoft Baseline Configuration Analyzer

  - by pinaldave

  I presented on subject Inside of Next Generation SQL Server – Denali online at Zeollar.com. This sessions are really fun as they are online, downloadable, and 100% demo oriented. I used SQL Server ‘Denali’ CTP 1 to present on the subject of What is New in Denali. My earlier session on the Topic of Best Practices Analyzer is also available to watch online here: SQL SERVER – Video – Best Practices Analyzer using Microsoft Baseline Configuration Analyzer I enjoyed presenting a lot on above two subjects. I would like to ask your opinion on the same. You can download the sessions and watch it yourself afterwords. Reference: Pinal Dave (http://blog.SQLAuthority.com) Filed under: Pinal Dave, PostADay, SQL, SQL Authority, SQL Documentation, SQL Download, SQL Query, SQL Server, SQL Tips and Tricks, SQLServer, T SQL, Technology

  Read the article

• Boot failure : No DEFAULT or UI configuration directive found!

  - by Sven

  Hello .... I've tried to install Ubuntu on a VMWare Virtual Machine, but it never get's past the bootloader : ISOLINUX 4.01 debian-20100714 ETCD Copyright (C) 1994-2010 H. Peter Anvin et al No DEFAULT or UI configuration directive found! boot: _ I've also tried to burn this .iso image to a CD and go from there - but I got the same problems also ... Some more details : VMWare Server 2.0.2 Build 203138 on Windows 2008 R2 ubuntu-10.10-desktop-i386.iso image used (downloaded yesterday evening) I have no clue, why this is not booting !!! Somebody have any ideas ? Thanks, Sven

  Read the article

• Does an onboard video affect the X windows configuration?

  - by Timothy

  Does the onboard video on the motherboard affect the X windows configuration? My system has onboard and pcie video. The onboard video is a NVIDIA GeForce 7025 GPU, On Board Graphic Max. Memory Share Up to 512MB(Under OS By Turbo Cache). I have a pcie dual head video card installed with two monitors. The video card is a GeForce 8400 GS, with 512mb memory. When installing Ubuntu 12.04, only one monitor worked. When pulling up system settings- Displays it shows a laptop. This is a desktop pc. I did get both monitors to work using nvidia using twinview -- A complicated process! When checking nvidia now it shows the monitors disabled. The Nvidia X server setting does show the GPU and all the information. I was thinking it's seeing the onboard video on the motherboard. Why else would it show laptop?

  Read the article

• Why do I need to relaunch dkpg-reconfigure keyboard-configuration after every startup?

  - by yves Baumes

  I've switched recently to an UK keyboard, from a FR keyboard. It is an usb keyboard, and first I plugged it in, I had to launch dpkg-reconfigure keyboard-configuration in order to request the correct layout (ie: uk). But after every reboot of the machine, the laytout comes back to the FR layout. How can I make the modification persisting? I am using Ubuntu, running the Stump Window Manager. And here is the /etc/default/keyboard at any time (that is right after startup, and before and after I run the dpkg-reconfigure tool) XKBMODEL="hhk" XKBLAYOUT="gb" XKBVARIANT="" XKBOPTIONS="terminate:ctrl_alt_bksp"

  Read the article

• Configuration server problem after changing /tmp mountpoint: how to solve?

  - by Aron Rotteveel

  I created a new partition on my hard drive because my /tmp partition was too small. I changed the mountpoint in /etc/fstab and rebooted. Every time I reboot, I get the following error message at the login screen: There is a problem with the configuration server. (/usr/lib/libgconf2-4/gconf-sanity-check-2 exited with status 256) When I log in, /tmp is mounted correctly and everything seems to work fine. When I reboot, the error shows again. When I change the /tmp mountpoint back to the old partition, the error message disappears. What could be causing this and how can I solve this issue?

  Read the article

• What is the simplest human readable configuration file format?

  - by Juha

  Current configuration file is as follows: mainwindow.title = 'test' mainwindow.position.x = 100 mainwindow.position.y = 200 mainwindow.button.label = 'apply' mainwindow.button.size.x = 100 mainwindow.button.size.y = 30 logger.datarate = 100 logger.enable = True logger.filename = './test.log' This is read with python to a nested dictionary: { 'mainwindow':{ 'button':{ 'label': {'value':'apply'}, ... }, 'logger':{ datarate: {'value': 100}, enable: {'value': True}, filename: {'value': './test.log'} }, ... } Is there a better way of doing this? The idea is to get XML type of behavior and avoid XML as long as possible. The end user is assumed almost totally computer illiterate and basically uses notepad and copy-paste. Thus the python standard "header + variables" type is considered too difficult. The dummy user edits the config file, able programmers handle the dictionaries. Nested dictionary is chosen for easy splitting (logger does not need or even cannot have/edit mainwindow parameters).

  Read the article

• GRUB- error: no such partition grub rescue and Error: No default or UI configuration directive found boot > on pendrive

  - by Ash

  I have dell inspiron, previously I installed Ubuntu 11.10 on my Windows 7 and made it dual boot. But since I want to upgrade my Ubuntu version and change the partition spacing, I deleted 11.10 partition directly and extended my hardrive space (Windows + Ubuntu) at that moment everything was fine. Then I prepared a 12.04 32bit USB and installed it . It was installed but isn't showing dual boot option like 11.10 and my machine directly boot into Windows 7. So instantly i again deleted my 12.04 partition . Now I login into Windows 7 but whenever I put USB ( with 12.04 ) to boot from it, I am facing error of "no such partition grub rescue" even though I try to put lower version(11.04) it showing another error "Error: No default or UI configuration directive found boot " I have reinstall Windows 7 and reformat all partition, still I am facing same error :(

  Read the article

• MVVM application architecture, where to put dependency injection configuration class, BusinessLayer and Common interfaces?

  - by gt.guybrush

  Planning my architecture for an MVVM application I come to this: MyApp.UI View MyApp.BusinessLayer ViewModel MyApp.DataAccessLayer RepositoryImplEF MyApp.DomainLayer DomainObject RepositoryInterface MyApp.Common Logging Security Utility (contains some reflection method used by many levels) CustomException MyApp.UnitTest I was inspired by Domain-driven-desing, test-driven-development and onion architecture but not sure to have done all well. I am not sure of a couple of things: where to put dependency injection configuration class? In the common project? where to put BusinessLayer interfaces? in Domain layer? where to put Common interfaces? in Domain layer? But Common in referenced from domain (for some reflection utilities and for DI if the response to 1. is yes) and circular reference isn't good

  Read the article

• What is the "don't force full gpu scalling" configuration in the newest Nvida driver settings?

  - by wild_oscar

  I have a Zotac Ion board on a computer running Linux ad I had the driver version 295.xx. I was trying to run a 1080 video on XBMC and, because playback was a bit sluggish, part of my (unsuccessful) attempt at making it run smoothly was to upgrade the Nvidia driver. The problem is that the computer is connected by HDMI to a Pioneer A/V system - which in turn is connected to the TV (also through HDMI). When I created this set up I didn't get any image on my tv until I Unchecked "force full gpu scaling" in "Flat Panel Scaling". After upgrading the Nvidia driver I no longer have image. Upon investigating, I saw on the release changelog: Removed Flat Panel Scaling configurability in nvidia-settings. Any desired scaling can be configured through the new "ViewPortIn" and "ViewPortOut" MetaMode attributes. I know very little about this, however, so I'm lost. What would the correct configuration be with these new ViewPortIn/Out options to achieve the same result as "unchecking force full gpu scalling"?

  Read the article

• IIS 7 503 error, application pool stop crash, defdoc.dll could not be loaded due to a configuration

  - by optician

  Hi All, Currently trying to get iis 7 to work, but every time I request a page, the application pool goes into stopped status. In the event log this is what comes back. The Module DLL 'C:\Windows\System32\inetsrv\defdoc.dll' could not be loaded due to a configuration problem. The current configuration only supports loading images built for a x86 processor architecture. The data field contains the error number. I've already re installed iis, any other ideas, I read that someone fixed this by downloading the dll again, but this seems like an odd solution. Thanks. EDIT I have now replaced the file with one I downloaded off the internet, and now it says The Module DLL 'C:\Windows\System32\inetsrv\protsup.dll' could not be loaded due to a configuration problem. I hope I don't have to get 100's of these.

  Read the article

• File History - Unable to scan user libraries for changes and perform backup of modified files for configuration

  - by azl

  When trying to run the File History tool in Windows 8 it runs for about 2 seconds then stops. No files are backed up to the selected drive. In the event viewer the only error that appears is: Unable to scan user libraries for changes and perform backup of modified files for configuration C:\Users\win8User\AppData\Local\Microsoft\Windows\FileHistory\Configuration\Config I've tried deleting both the configuration files and the FileHistory directory on the target drive. Setting up File History again results in the same error. Is there a better way to track down what is causing the failure? Or somehow get the File History tool to create a more verbose log file that shows what is causing the problem?

  Read the article

< Previous Page | 118 119 120 121 122 123 124 125 126 127 128 129  | Next Page >