Search Results

Search found 16940 results on 678 pages for 'disk drive'.

Page 123/678 | < Previous Page | 119 120 121 122 123 124 125 126 127 128 129 130  | Next Page >

• What do you use for a RAM disk on Windows Server?

  - by thelsdj

  We currently use AR Soft RAM Disk on some Windows 2003 servers for storing short lived temporary files. Looking forward to a move to 64-bit Windows Server 2008 I'm wondering what options there are for a RAM disk since it appears AR Soft RAM Disk was discontinued in 2005. I'm not looking for any physical disk backing, just a pure RAM disk that appears like a normal drive to Windows. Does anyone have any experience with RAM disks on Windows Server 2008, especially for 64-bit?

  Read the article

• Utility for easily disabling/enabling extra hard drives?

  - by SkippyFire

  I just got an Asus G60 laptop, and will be installing an SSD as the primary, and will use the existing HDD as a storage drive. Is there a utility that I can use to turn off/disconnect the storage drive when I'm not using it? Mainly, I want to be able to conserve power when I'm mobile, since the battery life of this laptop is pretty weak. Thanks in advance!

  Read the article

• Looking for a new backup solution to replace dying tape drive

  - by E3 Group

  We're running Windows Server 2003 SBS and another machine with Server 2003 Standard on it. The SBS server is about 7 years old running pretty much 24/7 - a HP server of some description. We have an Ultrium 448 cycling LTO2 400GB tapes daily and incrementally backing up approximately 100gb worth of data (20gb C:\ and system state, 40gb exchange, 40gb database for some crap marketing software) on BackupExec 10D. As of 5 months ago, the backups have been consistently failing with IO errors, bad reads and some write errors. When I say consistent, I mean every time and we haven't had a proper backup for the entire 5 months - So if the server explodes tomorrow, 7 years worth of data will just cease to exist. I've only just recently rejoined the company and am looking at rectifying the more concerning problems, so the first thing I did was try a backup to an USB2.0 external drive. It was excruciatingly slow. In fact it was so slow it took 40 hours and it still wasn't finished. I ended up cancelling it and reconfiguring the selections again to reduce file size. This, however, isn't a permanent solution. I concluded that the IO error was either from a faulty tape drive (which has a tape stuck in there right now and not coming out) or from a dying SCSI controller. Neither of them are good news and both are extremely expensive to fix. I'm operating on an extremely low budget so have been looking at outsourcing the backups. A company in Sydney (where I'm located) offer incremental online backups via a NAS. It costs almost double a new tape drive but offers monthly repayments which will let us get through times when cash flow is minimal. It seems like a sweet deal but it is still a little bit pricey. So I'm looking for a cheaper, yet reliable solution. Maybe some in-house NAS or something offsite? The idea is to avoid using tapes. Are there any recommendations for rectifying my current situation? Or are tapes the only way to go? I'm concerned that the server will die one day in the near future and I must be able to restore it to another server with different hardware.

  Read the article

• Not recognizing cd drive

  - by Jason Ochs

  My laptop is not recognizing cd's when I put the in the drive.

  Read the article

• Creating a bootable external drive in OSX

  - by Brian Postow

  I want to do some slightly dangerous testing, testing an install package I've written, so I've got an external drive, and I want to make it a bootable OSX disk, then I can boot up on the external, do my install, and if it screws things up, it doesn't actually affect the usability of my machine. The problem is that when I stick the disk that came with my computer (It's actually another computer in the office, but they're both minis) in and try to run the installer, it says "You cannot install OSx 10.6 on this computer". Now, the computer is ALREADY running 10.6, so that's a kind of silly error message... It does this when I boot to the DVDRom as well. Am I doing something really really dumb? or what?

  Read the article

• USB DVD Drive not recognised in Windows 7

  - by Kieron

  I have an external DVD drive (USB) which I'm trying to attach to a notebook but it's not recognised by Windows 7. I can see the device in the control panel, says it's working properly but doesn't show up in the explorer window so can't access it. I've got a dual boot with Ubuntu and it shows up fine in there, no problems so I know the drive and connection are fine. Have tried the upper and lower filters but no success. Thanks for any help you can provide.

  Read the article

• Is it advisable to use multiple ReadyBoost flash drives?

  - by ymasood

  I am a fan of ReadyBoost and have seen good results using it with my work laptop. I tried something today and connected a second flash drive (2GB) and configured it for use with ReadyBoost. The first is an 8GB configured with 4GB for ReadyBoost. I'm using Windows 7 RC 7100 and was wondering if using more than one ReadyBoost drive helps?

  Read the article

• Disk IO causing high load on Xen/CentOS guest

  - by Peter Lindqvist

  I'm having serious issues with a xen based server, this is on the guest partition. It's a paravirtualized CentOS 5.5. The following numbers are taken from top while copying a large file over the network. If i copy the file another time the speed decreases in relation to load average. So the second time it's half the speed of the first time. It needs some time to cool off after this. Load average slowly decreases until it's once again usable. ls / takes about 30 seconds. top - 13:26:44 up 13 days, 21:44, 2 users, load average: 7.03, 5.08, 3.15 Tasks: 134 total, 2 running, 132 sleeping, 0 stopped, 0 zombie Cpu(s): 0.0%us, 0.1%sy, 0.0%ni, 25.3%id, 74.5%wa, 0.0%hi, 0.0%si, 0.1%st Mem: 1048752k total, 1041460k used, 7292k free, 3116k buffers Swap: 2129912k total, 40k used, 2129872k free, 904740k cached PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND 1506 root 10 -5 0 0 0 S 0.3 0.0 0:03.94 cifsd 1 root 15 0 2172 644 556 S 0.0 0.1 0:00.08 init Meanwhile the host is ~0.5 load avg and steady over time. ~50% wait Server hardware is dual xeon, 3gb ram, 170gb scsi 320 10k rpm, and shouldn't have any problems with copying files over the network. disk = [ "tap:aio:/vm/dev01.img,xvda,w" ] I also get these in the log INFO: task syslogd:1350 blocked for more than 120 seconds. "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. syslogd D 00062E4F 2208 1350 1 1353 1312 (NOTLB) c0ef0ed0 00000286 6e71a411 00062e4f c0ef0f18 00000009 c0f20000 6e738bfd 00062e4f 0001e7ec c0f2010c c181a724 c1abd200 00000000 ffffffff c0ef0ecc c041a180 00000000 c0ef0ed8 c03d6a50 00000000 00000000 c03d6a00 00000000 Call Trace: [<c041a180>] __wake_up+0x2a/0x3d [<ee06a1ea>] log_wait_commit+0x80/0xc7 [jbd] [<c043128b>] autoremove_wake_function+0x0/0x2d [<ee065661>] journal_stop+0x195/0x1ba [jbd] [<c0490a32>] __writeback_single_inode+0x1a3/0x2af [<c04568ea>] do_writepages+0x2b/0x32 [<c045239b>] __filemap_fdatawrite_range+0x66/0x72 [<c04910ce>] sync_inode+0x19/0x24 [<ee09b007>] ext3_sync_file+0xaf/0xc4 [ext3] [<c047426f>] do_fsync+0x41/0x83 [<c04742ce>] __do_fsync+0x1d/0x2b [<c0405413>] syscall_call+0x7/0xb ======================= I have tried disabling irqbalanced as suggested here but it does not seem to make any difference.

  Read the article

• External USB HD issues with a twist (works on Windows7 but not XP)

  - by Eruditass

  I have this older external USB HD, 160 GB. I was using it to copy my Steam games to another computer. On the source computer, Windows 7 64-bit, everything worked fine. Drive reported no errors, had no hiccups, etc. Plugging it into the Windows XP 32-bit computer, it worked fine for looking through the files, moving files around on it (no real reading/writing, just modifying the filesystem table). However, when copying files from it to my internal HD, after a couple seconds to tens of minutes (seemingly random times), the USB device becomes unrecognized and it reports a delayed write error. Events in system log go like this, chronologically: (number times displayed)xSource (Event ID): "message" 2xdisk (51): An error was detected on device \Device\Harddisk1\D during a paging operation. 1xftdisk (57): The system failed to flush data to the transaction log. Corruption may occur. 1xApplication popup (26): Windows - Delayed Write Failed : Windows was unable to save all the data for the file E:\$Mft. The data has been lost. This error may be caused by a failure of your computer hardware or network connection. Please try to save this file elsewhere. 1xntfs (50): {Delayed Write Failed} Windows was unable to save all the data for the file . The data has been lost. This error may be caused by a failure of your computer hardware or network connection. Please try to save this file elsewhere. These repeat for a while, then there is 10+ disk messages or ftdisk messages. Other notes: This occurs on random files at random times. This problem cannot be replicated on the Windows 7 source machine when copying from the HD to a different location on its local disk chkdsk /f was run and found no errors. chkdsk /f/r has the delayed write issue. drive was set to quick removal. Setting to performance in device manager yielded same result I am not writing anything to the USB external drive, so I am not sure why there is even a delayed write error (writing file access times?) local Windows XP was chkdsk'd without problems Windows XP machine has no problems with other USB HD's Various USB ports were attempted Rebooting did not help Occurs with SyncToy as well as windows explorer SMART status is good on both local drive and the external one Lack of gaming is making me cranky

  Read the article

• Cannot assign a letter to a FAT32 partition

  - by Toc

  I have an external hard disk where I have created many partitions to use also in Linux. First two partitions are FAT32. The third is a Truecrypt partition. I cannot assign a letter to the second partition. When I go to Manage disk and right-click on the unassigned partition, most of the options are not enabled. What have I to do to see this partition on my XP PC?

  Read the article

• Do I dare clicking Delete Volume instead of Delete Partition?

  - by Olle

  I have a VMWare machine with one VM. That VM has a virtual disk which in windows is configured with two partitions and then a lot of slack space, as illustrated here: http://piclair.com/q8g5s What I want to do is delete the partition of 639 GB. However, since it's a dynamic disk, the right menu item says "Delete Volume" instead of "Delete Partition" (when I right click the 639GB space). My question is weather I dare to use "Delete Volume". I have read doing stuff like this on a dynamic volume can cause other partitions/volumes to go corrupt.

  Read the article

• Internal LTO tape drive becomes hot

  - by claasz

  We use an internal LTO3 tape drive (HP Ultrium 920) in a PC (no particular server hardware) running Linux. The tape drive becomes quite hot - I don't have the exact temperature, but you may touch it for a second or two, then it hurts ;-) This happens when the tape has nothing to do (during reading/writing, it might become even hotter, I haven't checked that). Besides that, the system is working fine. Now I'm wondering Why does the tape becomes so hot? Is this something I need to care about? Is there something like a 'standby' mode for the tape? (I think it should not consume that much energy when it is not used)

  Read the article

• Encrypting a thumb drive

  - by Kris

  What I would like to do is create a hidden, TrueCrypt partition on my thumb drive (along with the "fake" partition that it creates) but I also don't want to have the TrueCrypt software installed onto my machine. Is there a way to do this but add TrueCrypt as an auto-start item so I plug in my thumb drive, mount the hidden partition, and go? Beyond that, is there a way to make it work in ANY operating system (i.e. automatically start TrueCrypt on OS X, Linux or Windows on plug-in)? I'm more concerned with my first question but this would be icing on the cake.

  Read the article

• icacls in windows 7 does not give full permission to write files in root drive

  - by Menuta

  icacls in windows 7 does not give full permission to write files in root drive. We have a very old application based on Omnis7 that needs to create and read/write files on drive C: when running as a restricted user. In Windows XP to give this permission is quite trivial using cacls. cacls C:\ /G Everyone:(C) The equivalent icacls in Windows 7 will not work. icacls C:\ /Grant Everyone:(M) I have also tried the following. icacls C:\ /Grant Everyone:(F) icacls C:\ /Grant Domain\user:(F) trying to create file with a restricted user gives this C:\>copy nul text.txt Access is denied. 0 file(s) copied. After applying the icacls permissions above the result changes to this. C:\>copy nul text.txt A required privilege is not held by the client. 0 file(s) copied. Is this an issue with the way I am applying the permissions? Or is Window 7 being extremely strict?

  Read the article

• Give the path to the inserted USB key to a script

  - by Xavier Nodet

  I'd like to run a given Perl script whenever I connect my camera to my PC, so that this script will download all the photos on it. But as the drive letter for the camera may change depending on what's already connected, I need to pass this drive letter as an argument to the script. Is this doable? Thanks. PS: if this is not possible, an answer to this other question would be very helpful.

  Read the article

• HD failure questions ...

  - by JP

  I recently had one of my home PC hard drives fail. It was in a striped raid, so I had to rebuild the raid (no data lost, only the OS partition was there). Is there any way to diagnose exactly what went wrong with the drive? That is what caused the failure? Also, in general, what is a good way to dispose of a failed hard drive securely and realistically (I don't have thermite or muriatic acid)?

  Read the article

• Seeking (somewhat) better explanations about supporting > 2.1 TB hard drives.

  - by irrational John

  Today while Googling about I stumbled across posts claiming that Seagate plans to ship a 3TB drive sometime later in 2010. Unfortunately, the stuff I looked at all seemed to contain tidbits of info which I didn't think fit together properly. (I would link to some examples, but I'm only allowed 1 link per post at the moment). Now I really don't have any "need" to better understand the underlying tedious details of this. I am just curious. And confused. So ... some questions I'm hoping someone better informed than I might answer. The talk about a potential addressing problem in both the hardware and the software confused me. The assertion is that something called something called Long LBA addressing (LLBA) is needed in the Command Descriptor Block as a way to get around the current limits to access a hard drive bigger than ~2.1 (or ~2.2?) TB. OK, fine. But I thought the last time this problem came up it was solved by extending the length of the LBA field from 28 to 48 bits. (Remember this website? www.48bitlba.com) A 6 byte LBA is clearly large enough, so what's up with this LLBA talk. I thought this was all fixed back by Win XP SP2, if not sooner? And certainly all the hardware should be up to the task, shouldn't it? The real problem as I understand it with drives much bigger than 2 TB are the 4 byte LBA fields in the Master Boot Record (MBR) used to partition just about all hard drives at the moment. The most likely solution is to migrate to Intel's GUID Partition Table (GPT). A GPT uses 8 byte fields for the LBA. What I don't understand in this context is what is the problem with booting say Windows from a 3TB drive that uses a GPT. Granted, the current PC BIOS wouldn't know how to recognize or work with a GPT. But every GPT comes with a so-called "Safety" or "Guarding" MBR in sector 0.Apple already uses a hybrid version of the MBR to allow them to boot Windows on their Intel Macs (aka Boot Camp). Couldn't something similar be done to allow the PC BIOS to recognize and boot from a partition in, say, the first 1 GB of a 3GB or larger drive? I've got more questions such as where do 4K sectors fit into all of this. But it's probably time I just shut up and posted this. ;-) -irrational john

  Read the article

• Recover harddrive data

  - by gameshints

  I have a dell laptop that recently "died" (It would get the blue screen of death upon starting) and the hard drive would make a weird cyclic clicking noises. I wanted to see if I could use some tools on my linux machine to recover the data, so I plugged it into there. If I run "fdisk" I get: Disk /dev/sdb: 20.0 GB, 20003880960 bytes 64 heads, 32 sectors/track, 19077 cylinders Units = cylinders of 2048 * 512 = 1048576 bytes Disk identifier: 0x64651a0a Disk /dev/sdb doesn't contain a valid partition table Fine, the partition table is messed up. However if I run "testdisk" in attempt to fix the table, it freezes at this point, making the same cyclical clicking noises: Disk /dev/sdb - 20 GB / 18 GiB - CHS 19078 64 32 Analyse cylinder 158/19077: 00% I don't really care about the hard drive working again, and just the data, so I ran "gpart" to figure out where the partitions used to be. I got this: dev(/dev/sdb) mss(512) chs(19077/64/32)(LBA) #s(39069696) size(19077mb) * Warning: strange partition table magic 0x2A55. Primary partition(1) type: 222(0xDE)(UNKNOWN) size: 15mb #s(31429) s(63-31491) chs: (0/1/1)-(3/126/63)d (0/1/32)-(15/24/4)r hex: 00 01 01 00 DE 7E 3F 03 3F 00 00 00 C5 7A 00 00 Primary partition(2) type: 007(0x07)(OS/2 HPFS, NTFS, QNX or Advanced UNIX) (BOOT) size: 19021mb #s(38956987) s(31492-38988478) chs: (4/0/1)-(895/126/63)d (15/24/5)-(19037/21/31)r hex: 80 00 01 04 07 7E FF 7F 04 7B 00 00 BB 6F 52 02 So I tried to mount just to the old NTFS partition, but got an error: sudo mount -o loop,ro,offset=16123904 -t ntfs /dev/sdb /mnt/usb NTFS signature is missing. Ugh. Okay. But then I tried to get a raw data dump by running dd if=/dev/sdb of=/home/erik/brokenhd skip=31492 count=38956987 But the file got up to 59885568 bytes, and made the same cyclical clicking noises. Obviously there is a bad sector, but I don't know what to do about it! The data is still there... if I view that 57MB file in textpad... I can see raw data from files. How can I get my data back? Thanks for any suggestions, Solution: I was able to recover about 90% of my data: Froze harddrive in freezer Used Ddrescue to make a copy of the drive Since Ddrescue wasn't able to get enough of my drive to use testdisk to recover my partitions/file system, I ended up using photorec to recover most of my files

  Read the article

• Moving the OS X swap file to a faster drive

  - by Milky Joe

  I have a new Mac Mini that's running the latest version of Snow Leopard. The internal drive is a bit of a slouch. I'd like to move the swap file (or whatever it's called is OS X) to my faster external drive (Firewire 800, permanently connected). Is this possible? I've read that the old solutions aren't working in 10.6. My Mac has 2GB of RAM, so the swap file is used quite a bit when I'm doing intensive work (Photoshop etc).

  Read the article

• cannot access new drive through nfs

  - by l.thee.a

  I am running nfs-kernel-server to access my files on my linux machine(ubuntu - /share). The disk I have been using is full. So I have added a new disk and mounted it to /share/data. My other pc mounts the /share folder to /mnt/nfs; but cannot see the contents of /mnt/nfs/data. I have tried adding /share/data to /etc/exports, but it did not help. What do I do? PS: I am looking for another solution than explicitly mounting /share/data on the second drive.

  Read the article

• Can the New SATA 6.0Gb Western Digital VelociRaptor Take Advantage of the Transfer Rate?

  - by quickcel

  I see that Newegg has a new Western Digital VelociRaptor out with a 6.0Gb SATA interface: http://www.newegg.com/Product/Product.aspx?Item=N82E16822136555 What is the bottleneck with this drive? The transfer rate of the SATA interface or the transfer rate of the actual drive?

  Read the article

• how to make SATA drive appear as removable drive?

  - by skevar7

  Now my secondary drive shows as non-removable. (AHCI mode is set in BIOS)

  Read the article

• What if I dismount main volume, where the Windows is installed

  - by ST3

  I'm writing permanent file deletion tool and accessing raw disk clusters. Since Windows Vista writing into raw disk is a bit more complicated. I have tried on my external data device first and worked fine, however one of the steps was dismounting of the volume, not sure if it is a good idea to dismount main volume where the Windows are. Want to ask that is possible consequences and if it safe/unsafe/very unsafe.

  Read the article

• SATA drive not recognized when installing RHEL 5.1 on PowerEdge R410

  - by Rachel

  Here's my setup: Dell R410 with Perc S100 (software) raid controller on an Intel ICH10R chipset The first problem is that the Perc S100 is only supported on windows. I'm trying to install RHEL 5.1. It boots from the cdrom, but later the installer can't see the cdrom or hard drive. Both are connected to the on-board sata controller. The only options in the R410 bios for SATA are ATA or RAID. I don't need raid, I just want a single drive setup.

  Read the article

• Enabling quota and doing quotacheck on reboot

  - by nixnotwin

  I have setup quota for home directories on ubuntu 10.04 server. I followed these tutorials: 5 Steps to Setup User and Group Disk Quota and Disk Quota This code I used at fstab file: /dev/sda1 /home ext4 defaults,usrjquota=aquota.user,grpjquota=aquota.grp,jqfmt=vfsv0 1 1 I have doubts about whether following steps are necessary: Adding quotaon -a >/dev/null 2>&1 to /etc/rc.local and adding quotacheck -avug to /etc/cron.daily/quotacheck

  Read the article

< Previous Page | 119 120 121 122 123 124 125 126 127 128 129 130  | Next Page >