Search Results

Search found 4834 results on 194 pages for 'dns srv'.

Page 123/194 | < Previous Page | 119 120 121 122 123 124 125 126 127 128 129 130  | Next Page >

• Windows XP periodically disconnects, reconnects; Windows 7 doesn't

  - by einpoklum

  My setup: I have a PC with a Gigabyte GA-MA78S2H motherboard (Realtek Gigabit wired Ethernet on-board). I have the latest drivers (at least the latest driver for the NIC. I'm connecting via an Edimax BR-6216Mg (again, wired connection). For some reason I experience short periodic disconnects and reconnects. Specifically, Skype disconnects, tries to connect, succeeds after a short while; incoming SFTP sessions get dropped; using a browser, I sometime get stuck in the DNS lookup or connection to the website and a page won't load. A couple of seconds later, a reload works. All this happens with Windows XP SP3. With Windows 7, it doesn't happen. The connection is smooth (OS is sluggish though, but never mind that). Like I said, I updated the NIC driver. I tried reducing the MTU (used something called Dr. TCP), thinking maybe that would help, but it didn't. (I'm a bit but not super-knowledgeable about TCP parameters.) I'm guessing it's either a problem with the driver or some settings which are different between the two OSes. ipconfig for my adapter: Ethernet adapter Local Area Connection: Connection-specific DNS Suffix . : Description . . . . . . . . . . . : Realtek PCIe GBE Family Controller Physical Address. . . . . . . . . : 00-1D-7D-E9-72-9E Dhcp Enabled. . . . . . . . . . . : Yes Autoconfiguration Enabled . . . . : Yes IP Address. . . . . . . . . . . . : 192.168.0.2 Subnet Mask . . . . . . . . . . . : 255.255.255.0 Default Gateway . . . . . . . . . : 192.168.0.254 DHCP Server . . . . . . . . . . . : 192.168.0.254 DNS Servers . . . . . . . . . . . : 192.117.235.235 62.219.186.7 Lease Obtained. . . . . . . . . . : Saturday, March 10, 2012 8:28:20 AM Lease Expires . . . . . . . . . . : Friday, January 26, 1906 2:00:04 AM

  Read the article

• How to use CLEAR USB internet connection in Ubuntu (host) and WindowsXP (guest) using VirtualBox

  - by bithacker

  I'm trying to use CLEAR Motorola WiMax USB in Ubuntu as there is no support for linux as yet. I've installed windowsxp as guest in ubuntu and the version I'm using is 3.2.2. USB is connecting fine in WindowsXP but I can't use internet in Ubuntu. Can you please tell me how to do it. Here is the configuration that could help you guys. Thanks in advance. I'm using Two Network Adapters. Network Adapter 1: PCnet-FAST III (NAT) Adapter 2: PCnet-FAST III (Host-only adapter, 'vboxnet0') ipconfig [on Guest windowsXP] Windows IP Configuration Ethernet adapter Local Area Connection: PCnet-FAST III (NAT) Connection-specific DNS Suffix . : IP Address. . . . . . . . . . . . : 10.0.2.15 Subnet Mask . . . . . . . . . . . : 255.255.255.0 Default Gateway . . . . . . . . . : 10.0.2.2 Ethernet adapter Local Area Connection 3: PCnet-FAST III (Host-only adapter, 'vboxnet0') Connection-specific DNS Suffix . : IP Address. . . . . . . . . . . . : 192.168.56.101 Subnet Mask . . . . . . . . . . . : 255.255.255.0 Default Gateway . . . . . . . . . : Ethernet adapter Local Area Connection 2: Connection-specific DNS Suffix . : CLEAR Motorola USB IP Address. . . . . . . . . . . . : 10.168.242.33 Subnet Mask . . . . . . . . . . . : 255.255.192.0 Default Gateway . . . . . . . . . : 10.168.192.2 IFCONFIG [on Host Ubuntu] (Ethernet) eth0 Link encap:Ethernet HWaddr 00:14:22:b9:9d:76 UP BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) Interrupt:16 eth1 (Wireless) Link encap:Ethernet HWaddr 00:13:ce:f0:9b:0d inet6 addr: fe80::213:ceff:fef0:9b0d/64 Scope:Link UP BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:1 errors:0 dropped:5 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 B) TX bytes:84 (84.0 B) Interrupt:17 Base address:0xe000 Memory:dfcff000-dfcfffff lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:2292 errors:0 dropped:0 overruns:0 frame:0 TX packets:2292 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:171952 (171.9 KB) TX bytes:171952 (171.9 KB) vboxnet0 Link encap:Ethernet HWaddr 0a:00:27:00:00:00 inet addr:192.168.56.1 Bcast:192.168.56.255 Mask:255.255.255.0 inet6 addr: fe80::800:27ff:fe00:0/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:137 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 B) TX bytes:21174 (21.1 KB)

  Read the article

• Mac won't boot into safe mode

  - by Stephen

  Mac boots fine normally, except when in safe mode. Holding down shift when booting gets me to the progress bar on the grey screen. Progress bar gets about half way before mac reboots. I modified nvram boot-args to get a better look: sudo nvram boot-args="-x -v" It definitely gets through fsck, skips loading kernel extensions (since it's in safe mode), does something with the network interfaces, then this is the last thing it wips through... Aug 22 11:56:21 Crockpot com.apple.SecurityServer[15]: Succeeded authorizing right 'com.apple.ServiceManagement.daemons.modify' by client '/usr/libexec/UserEventAgent' [10] for authorization created by '/usr/libexec/UserEventAgent' [10] (100012,0) Aug 22 11:56:22 Crockpot fseventsd[37]: event logs in /.fseventsd out of sync with volume. destroying old logs. (1 174 330) Aug 22 11:56:22 Crockpot fseventsd[37]: log dir: /.fseventsd getting new uuid: 5C379650-26FA-428F-B81F-4FE4349D50B3 Aug 22 11:56:23 Crockpot mDNSResponder[39]: mDNSResponder mDNSResponder-379.27 (Jun 20 2012 15:40:55) starting OSXVers 12 Aug 22 11:56:23 Crockpot systemkeychain[35]: done file: /var/run/systemkeychaincheck.done Aug 22 11:56:23 Crockpot configd[17]: network changed: DNS* Aug 22 11:56:24 --- last message repeated 1 time --- Aug 22 11:56:24 Crockpot mDNSResponder[39]: D2D_IPC: Loaded Aug 22 11:56:24 Crockpot mDNSResponder[39]: D2DInitialize succeeded Aug 22 11:56:24 Crockpot mDNSResponder[39]: Adding registration domain 273025955.members.btmm.icloud.com. Aug 22 11:56:24 Crockpot kernel[0]: MacAuthEvent en1 Auth result for: 00:23:69:35:dc:fe MAC AUTH succeeded Aug 22 11:56:24 Crockpot kernel[0]: MacAuthEvent en1 Auth result for: 00:23:69:35:dc:fe Unsolicited Auth Aug 22 11:56:24 Crockpot kernel[0]: wlEvent: en1 en1 Link UP virtIf = 0 Aug 22 11:56:24 Crockpot kernel[0]: AirPort: Link Up on en1 Aug 22 11:56:24 Crockpot kernel[0]: en1: BSSID changed to 00:23:69:35:dc:fe Aug 22 11:56:24 Crockpot kernel[0]: en1::IO80211Interface::postMessage bssid changed Aug 22 11:56:24 Crockpot kernel[0]: AirPort: RSN handshake complete on en1 Aug 22 11:56:25 Crockpot cfprefsd[19]: CFPreferences failed to read preferences data. Errno was 21 Aug 22 11:56:25 --- last message repeated 1 time --- Aug 22 11:56:25 Crockpot airportd[30]: _doAutoJoin: Already associated to “burnum”. Bailing on auto-join. Aug 22 11:56:25 Crockpot com.apple.kextd[11]: Can't load IOBluetoothSerialManager.kext - ineligible during safe boot. Aug 22 11:56:25 Crockpot com.apple.kextd[11]: Load com.apple.iokit.IOBluetoothSerialManager failed; removing personalities from kernel. Aug 22 11:56:25 Crockpot cfprefsd[19]: CFPreferences: error renaming file blued.plist.HXuEmQn to blued.plist. Aug 22 11:56:27 Crockpot awacsd[52]: Starting awacsd connectivity-77 (Jun 20 2012 15:40:49) Aug 22 11:56:27 Crockpot com.apple.SecurityServer[15]: Succeeded authorizing right 'system.services.systemconfiguration.network' by client '/System/Library/Frameworks/SystemConfiguration.framework/Versions/A/Resources/SCHelper' [54] for authorization created by '/usr/sbin/awacsd' [52] (100003,0) Aug 22 11:56:27 --- last message repeated 1 time --- Aug 22 11:56:27 Crockpot awacsd[52]: Configuring lazy AWACS client: 273025955.p04.members.btmm.icloud.com. Aug 22 11:56:28 Crockpot apsd[55]: CGSLookupServerRootPort: Failed to look up the port for "com.apple.windowserver.active" (1102) Aug 22 11:56:32 --- last message repeated 1 time --- Aug 22 11:56:32 Crockpot awacsd[52]: KV HTTP 0 Aug 22 11:56:38 --- last message repeated 1 time --- Aug 22 11:56:38 Crockpot apsd[55]: CGSLookupServerRootPort: Failed to look up the port for "com.apple.windowserver.active" (1102) Aug 22 11:56:47 Crockpot awacsd[52]: KV HTTP 0 Aug 22 11:56:49 Crockpot configd[17]: subnet_route: write routing socket failed, Network is unreachable Aug 22 11:56:51 Crockpot configd[17]: network changed: v4(en1+:169.254.80.161) DNS* Proxy+ SMB Aug 22 11:56:51 Crockpot UserEventAgent[10]: Captive: en1: Not probing 'burnum' (protected network) Aug 22 11:56:51 Crockpot configd[17]: network changed: v4(en1:169.254.80.161) DNS Proxy SMB Aug 22 11:57:07 Crockpot awacsd[52]: KV HTTP 0 Aug 22 11:57:23 Crockpot fseventsd[37]: Logging disabled completely for device:1: /Volumes/Recovery HD Aug 22 11:57:25 Crockpot kernel[0]: Kext loading now disabled. Aug 22 11:57:25 Crockpot kernel[0]: Kext unloading now disabled. Aug 22 11:57:25 Crockpot mDNSResponder[39]: mDNSResponder mDNSResponder-379.27 (Jun 20 2012 15:40:55) stopping Aug 22 11:57:25 Crockpot com.apple.SecurityServer[15]: Killing auth hosts Aug 22 11:57:25 Crockpot UserEventAgent[10]: dnssd_clientstub DNSServiceProcessResult called with DNSServiceRef with no ProcessReply function Aug 22 11:57:25 Crockpot configd[17]: dnssd_clientstub read_all(26) failed 0/28 0 Aug 22 11:57:25 Crockpot configd[17]: [0x7fb025119ff0] SCNetworkReachability _llq_callback w/error=-65563 Aug 22 11:57:25 Crockpot UserEventAgent[10]: dnssd_clientstub DNSServiceProcessResult called with DNSServiceRef with no ProcessReply function Aug 22 11:57:25 Crockpot mDNSResponder[39]: D2D_IPC: Terminated Aug 22 11:57:25 Crockpot mDNSResponder[39]: D2DTerminate succeeded Aug 22 11:57:25 Crockpot awacsd[52]: dnssd_clientstub read_all(4) failed 0/28 0 Aug 22 11:57:25 Crockpot UserEventAgent[10]: dnssd_clientstub DNSServiceProcessResult called with DNSServiceRef with no ProcessReply function Aug 22 11:57:25 --- last message repeated 2 times --- Aug 22 11:57:25 Crockpot apsd[55]: dnssd_clientstub read_all(4) failed 0/28 0 Aug 22 11:57:25 Crockpot configd[17]: SCNC: stop, triggered by configd, type PPPSerial, reason Terminated All Aug 22 11:57:25 Crockpot configd[17]: _d2dCallback: D2D connection to mDNSResponder lost Aug 22 11:57:25 Crockpot UserEventAgent[10]: dnssd_clientstub DNSServiceProcessResult called with DNSServiceRef with no ProcessReply function Aug 22 11:57:25 --- last message repeated 4 times --- Aug 22 11:57:25 Crockpot kernel[0]: Kext autounloading now disabled. Aug 22 11:57:25 Crockpot kernel[0]: Kernel requests now disabled. ... before rebooting in the middle of the safe mode startup sequence. Aug 22 12:01:10 localhost bootlog[0]: BOOT_TIME 1345662070 0 Aug 22 12:01:32 localhost kernel[0]: PMAP: PCID enabled Aug 22 12:01:32 localhost kernel[0]: Darwin Kernel Version 12.0.0: Sun Jun 24 23:00:16 PDT 2012; root:xnu-2050.7.9~1/RELEASE_X86_64 Any ideas what's causing the safe mode boot to fail? System Info MacBook Pro 8,2 2.2 Ghz Core i7 4 GM Ram Mountain Lion 10.8 500GB TOSHIBA MK5065GSXF Serial-ATA rotational disk

  Read the article

• DDNS Not Creating Journal (Dhcpd and Named)

  - by user130094

  * EDIT 1 * After monkeying with additional debug logging I see some log entries of interest. 27-Jul-2012 23:45:26.537 general: error: zone example.lan/IN/internal: journal rollforward failed: no more 27-Jul-2012 23:45:26.537 general: error: zone example.lan/IN/internal: not loaded due to errors. ^^^ If I can remedy the above messages I think I'll be good to go ^^^ * EDIT 2 * Grasping at straws I touched a forward and a reverse zone journal file and restarted named. Boom! Works. Despite documentation stating the files are created automatically and what I have seen before... dunno why but that did the trick. Also re-checked perms on the dir the files live in. As certain as I was, they were correct with named having rw. CentOS 6 (final) dhcpd 4.1.1-P1 named BIND 9.8.2rc1-RedHat-9.8.2-0.10.rc1.el6 Basic DHCP and DNS functionality are in place on 192.168.111.2. Clients are assigned addresses as intended and can resolve local DNS names as well as Internet names. My problem is that named's zone journal files are not created. chroot: /var/named/chroot I tried placing the zone files in various directories (/var/named/data, /var/named, /var/named/dynamic - no matter which dir with named owning and wide open perms I now get nowhere). Along the way I, at one point, got a permission denied when named tried to create the journal. Resolved the issue by: chown --recursive named:named /var/named chmod --recursive 777 /var/named The journal was then created and here's where things fell apart. I attempted to tame permissions to something more sane and broke it. Once changed and having restarted named it threw an error indicating the journal was out of sync (or something to that affect)... didn't matter since this is a new setup so I deleted it and now it is not recreated. Now though I see no errors in /var/log/messages, my chrooted /var/log/named.log, or chrooted /var/log/named.debug. I increased the debug level with 'rndc trace' - no love. Increased trace to 10, still nothing. SELinux is disabled... [root@server temp]# sestatus SELinux status: disabled dhcpd.conf... allow client-updates; ddns-update-style interim; subnet 192.168.111.0 netmask 255.255.255.224 { ... key dhcpudpate { algorithm hmac-md5; secret LDJMdPdEZED+/nN/AGO9ZA==; } zone example.lan. { primary 192.168.111.2; key dhcpudpate; } } named.conf... key dhcpudpate { algorithm hmac-md5; secret "LDJMdPdEZED+/nN/AGO9ZA=="; }; zone "example.lan" { type master; file "/var/named/dynamic/example.lan.db"; allow-transfer { none; }; allow-update { key dhcpudpate; }; notify false; check-names ignore; }; The following shows /var/log/named.log output of named starting up - no errors. 27-Jul-2012 21:33:39.349 general: info: zone 111.168.192.in-addr.arpa/IN/internal: loaded serial 2012072601 27-Jul-2012 21:33:39.349 general: info: zone example.lan/IN/internal: loaded serial 2012072501 27-Jul-2012 21:33:39.350 general: info: zone example2.lan/IN/internal: loaded serial 2012072501 27-Jul-2012 21:33:39.350 general: info: zone example3.lan/IN/internal: loaded serial 2012072601 27-Jul-2012 21:33:39.350 general: info: zone example4.lan/IN/internal: loaded serial 2012072501 27-Jul-2012 21:33:39.351 general: info: zone example5.lan/IN/internal: loaded serial 2012072501 27-Jul-2012 21:33:39.351 general: info: managed-keys-zone ./IN/internal: loaded serial 0 27-Jul-2012 21:33:39.351 general: info: zone example.lan/IN/external: loaded serial 2012072501 27-Jul-2012 21:33:39.352 general: info: zone example1.lan/IN/external: loaded serial 2012072501 27-Jul-2012 21:33:39.352 general: info: zone example2.lan/IN/external: loaded serial 2012072501 27-Jul-2012 21:33:39.352 general: info: zone example3.lan/IN/external: loaded serial 2012072501 27-Jul-2012 21:33:39.353 general: info: managed-keys-zone ./IN/external: loaded serial 0 27-Jul-2012 21:33:39.353 general: notice: running 27-Jul-2012 21:34:03.825 general: info: received control channel command 'trace 10' 27-Jul-2012 21:34:03.825 general: info: debug level is now 10 ...and /var/log/messages for a named start... Jul 27 23:02:04 server named[9124]: ---------------------------------------------------- Jul 27 23:02:04 server named[9124]: BIND 9 is maintained by Internet Systems Consortium, Jul 27 23:02:04 server named[9124]: Inc. (ISC), a non-profit 501(c)(3) public-benefit Jul 27 23:02:04 server named[9124]: corporation. Support and training for BIND 9 are Jul 27 23:02:04 server named[9124]: available at https://www.isc.org/support Jul 27 23:02:04 server named[9124]: ---------------------------------------------------- Jul 27 23:02:04 server named[9124]: adjusted limit on open files from 4096 to 1048576 Jul 27 23:02:04 server named[9124]: found 2 CPUs, using 2 worker threads Jul 27 23:02:04 server named[9124]: using up to 4096 sockets Jul 27 23:02:04 server named[9124]: loading configuration from '/etc/named.conf' Jul 27 23:02:04 server named[9124]: using default UDP/IPv4 port range: [1024, 65535] Jul 27 23:02:04 server named[9124]: using default UDP/IPv6 port range: [1024, 65535] Jul 27 23:02:04 server named[9124]: listening on IPv4 interface eth0, 192.168.111.2#53 Jul 27 23:02:04 server named[9124]: generating session key for dynamic DNS Jul 27 23:02:04 server named[9124]: sizing zone task pool based on 12 zones Jul 27 23:02:04 server named[9124]: set up managed keys zone for view internal, file 'dynamic/3bed2cb3a3acf7b6a8ef408420cc682d5520e26976d354254f528c965612054f.mkeys' Jul 27 23:02:04 server named[9124]: set up managed keys zone for view external, file 'dynamic/3c4623849a49a53911c4a3e48d8cead8a1858960bccdea7a1b978d73ec2f06d7.mkeys' Jul 27 23:02:04 server named[9124]: command channel listening on 127.0.0.1#953 What can I do to troubleshoot this further? It almost seems as though dhcpd is not triggering the update. Maybe I should troubleshoot here and, if so, how? Many thanks.

  Read the article

• How to use CLEAR USB WiMax in Ubuntu (host) and Windows XP (guest) using VirtualBox

  - by bithacker

  I'm trying to use CLEAR Motorola WiMax USB in Ubuntu as there is no support for Linux as yet. I've installed Windows XP as guest in Ubuntu and the version I'm using is 3.2.2. USB is connecting fine in Windows XP but I can't use internet in Ubuntu. Can you please tell me how to do it. Here is the configuration that could help you guys. Thanks in advance. I'm using Two Network Adapters. Network Adapter 1: PCnet-FAST III (NAT) Adapter 2: PCnet-FAST III (Host-only adapter, 'vboxnet0') ipconfig [on Guest windowsXP] Windows IP Configuration Ethernet adapter Local Area Connection: PCnet-FAST III (NAT) Connection-specific DNS Suffix . : IP Address. . . . . . . . . . . . : 10.0.2.15 Subnet Mask . . . . . . . . . . . : 255.255.255.0 Default Gateway . . . . . . . . . : 10.0.2.2 Ethernet adapter Local Area Connection 3: PCnet-FAST III (Host-only adapter, 'vboxnet0') Connection-specific DNS Suffix . : IP Address. . . . . . . . . . . . : 192.168.56.101 Subnet Mask . . . . . . . . . . . : 255.255.255.0 Default Gateway . . . . . . . . . : Ethernet adapter Local Area Connection 2: Connection-specific DNS Suffix . : CLEAR Motorola USB IP Address. . . . . . . . . . . . : 10.168.242.33 Subnet Mask . . . . . . . . . . . : 255.255.192.0 Default Gateway . . . . . . . . . : 10.168.192.2 IFCONFIG [on Host Ubuntu] (Ethernet) eth0 Link encap:Ethernet HWaddr 00:14:22:b9:9d:76 UP BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) Interrupt:16 eth1 (Wireless) Link encap:Ethernet HWaddr 00:13:ce:f0:9b:0d inet6 addr: fe80::213:ceff:fef0:9b0d/64 Scope:Link UP BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:1 errors:0 dropped:5 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 B) TX bytes:84 (84.0 B) Interrupt:17 Base address:0xe000 Memory:dfcff000-dfcfffff lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:2292 errors:0 dropped:0 overruns:0 frame:0 TX packets:2292 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:171952 (171.9 KB) TX bytes:171952 (171.9 KB) vboxnet0 Link encap:Ethernet HWaddr 0a:00:27:00:00:00 inet addr:192.168.56.1 Bcast:192.168.56.255 Mask:255.255.255.0 inet6 addr: fe80::800:27ff:fe00:0/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:137 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 B) TX bytes:21174 (21.1 KB)

  Read the article

• MSMQ messages using HTTP just won't get delivered

  - by John Breakwell

  I'm starting off the blog with a discussion of an unusual problem that has hit a couple of my customers this month. It's not a problem you'd expect to bump into and the solution is potentially painful. Scenario You want to make use of the HTTP protocol to send MSMQ messages from one machine to another. You have installed HTTP support for MSMQ and have addressed your messages correctly but they will not leave the outgoing queue. There is no configuration for HTTP support - setup has already done all that for you (although you may want to check the most recent "Installation of the MSMQ HTTP Support Subcomponent" section of MSMQINST.LOG to see if anything DID go wrong) - so you can't tweak anything. Restarting services and servers makes no difference - the messages just will not get delivered. The problem is documented and resolved by Knowledgebase article 916699 "The message may not be delivered when you use the HTTP protocol to send a message to a server that is running Message Queuing 3.0". It is unlikely that you would be able to resolve the problem without the assistance of PSS because there are no messages that can be seen to assist you and only access to the source code exposes the root cause. As this communication is over HTTP, the IIS logs would be a good place to start. POST entries are logged which show that connectivity is working and message delivery is being attempted: #Software: Microsoft Internet Information Services 6.0 #Version: 1.0 #Date: 2006-09-12 12:11:29 #Fields: date time s-sitename s-ip cs-method cs-uri-stem cs-uri-query s-port cs-username c-ip cs(User-Agent) sc-status sc-substatus sc-win32-status 2006-09-12 12:12:12 W3SVC1 10.1.17.219 POST /msmq/private$/test - 80 - 10.2.200.3 - 200 0 0 If you capture the traffic with Network Monitor you can see the POST being sent to the server but you also see a response being returned to the client: HTTP: Response to Client; HTTP/1.1; Status Code = 500 - Internal Server Error "Internal Server Error" means we can probably stop looking at IIS and instead focus on the Message Queuing ISAPI extension (Mqise.dll). MSMQ 3.0 (Windows XP and Windows Server 2003) comes with error logging enabled by default but the log files are in binary format - MSMQ 2.0 generated logging in plain text. The symbolic information needed for formatting the files is not currently publicly available so log files have to be sent in to Microsoft PSS.  Although this does mean raising a support case, formatting the log files to text and returning them to the customer shouldn't take long. Obviously the engineer analyses them for you - I just want to point out that you can see the logging output in text format if you want it. The important entries in the log for this problem are: [7]b48.928 09/12/2006-13:20:44.552 [mqise GetNetBiosNameFromIPAddr] ERROR:Failed to get the NetBios name from the DNS name, error = 0xea [7]b48.928 09/12/2006-13:20:44.552 [mqise RPCToServer] ERROR:RPC call R_ProcessHTTPRequest failed, error code = 1702(RPC_S_INVALID_BINDING) which allow a Microsoft escalation engineer to check the MQISE source code to see what is going wrong. This problem according to the article occurs when the extension tries to bind to the local MSMQ service after the extension receives a POST request that contains an MSMQ message. MSMQ resolves the server name by using the DNS host name but the extension cannot bind to the service because the buffer that MSMQ uses to resolve the server name is too small - server names that are exactly 15 characters long will not fit. RPC exception 0x6a6 (RPC_S_INVALID_BINDING) occurs in the W3wp.exe process but the exception is handled and so you do not receive an error message. The workaround is to rename the MSMQ server to something less than 15 characters. If the problem has only just been noticed in a production environment - an application may have been modified to get through a newly-implemented firewall, for example - then renaming is going to be an issue. Other applications may need to be reinstalled or modified if server names are hard-coded or stored in the registry. The renaming may also break a company naming convention where the name is built up from something like location+department+number. If you want to learn more about MSMQ logging then check out Chapter 15 of the MSMQ FAQ. In fact, even if you DON'T want to learn anything about MSMQ logging you should read the FAQ anyway as there is a huge amount of useful information on known issues and the like.

  Read the article

• View Weather Underground Forecasts in Google Chrome

  - by Asian Angel

  If you like a simple straightforward interface for keeping up with weather forecasts then join us as we look at the Weather Underground extension for Google Chrome. Weather Underground in Action As soon as you click on the “Toolbar Icon” you will need to enter a location. Keep in mind that you will need to enter the “city and country” if using that option. Going with less information will yield an “error”. Note: The extension did not work for some Asian locations during our tests. In honor of the Olympics we chose Vancouver, Canada. You can hover over the “Toolbar Button” to see the current conditions or click to view the current day’s conditions, the current day’s forecast, and the forecast for the following three days. It is a simple straightforward interface. Note: There are no options to worry with. Clicking on the “Detailed Forecast Link” in the drop-down window will take you to the Weather Underground webpage for your location. Clicking on the “Weather Underground Link” in the drop-down window will take you to the Weather Underground U.S. Homepage. Additional Weather Underground Fun Since we were focusing on Weather Underground we have an extra bit of fun for you. If you love being able to view a “large scale” map of your location with current conditions and forecast combined then you might want to have a look at Weather Underground’s “wxmap webpage”. Using the link below you can access the basic starting page where you will be asked to enter your location. Once you have entered the information you will see the default “Terrain View” for your location and a “Current Conditions & Forecast Window” in the lower left corner. You can modify how your map looks by choosing from “Temperature, Precipitation, Clouds, Satellite, Hybrid, & Terrain” views. Going full screen in your browser with this gives your monitor a wonderful and unique look that will have your family & friends asking you how you did it. Note: Terrain View shown here. Clicking on the “Settings Link” in the upper left corner will let you tweak your map view very nicely. Conclusion If you love using Weather Underground for your weather forecasts then you can add a “double dose” of goodness to your browser. Links Download the Weather Underground extension (Google Chrome Extensions) Access the Full Screen Weather Underground Map & Forecast for your area Similar Articles Productive Geek Tips Add Weather Forecasts to Google ChromeMonitor the Weather for Your Location in ChromeView the Time & Date in Chrome When Hiding Your TaskbarView Maps and Get Directions in Google ChromeGoogle Image Search Quick Fix TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips Revo Uninstaller Pro Registry Mechanic 9 for Windows PC Tools Internet Security Suite 2010 PCmover Professional Windows 7 Easter Theme YoWindoW, a real time weather screensaver Optimize your computer the Microsoft way Stormpulse provides slick, real time weather data Geek Parents – Did you try Parental Controls in Windows 7? Change DNS servers on the fly with DNS Jumper

  Read the article

• lxc containers hangs after upgrade to 13.10

  - by doug123

  I have 3 lxc containers. They were all working fine on 12.10 and I upgraded the containers with do-release-upgrade on the containers to 13.04 and 13.10 and that worked great. Then I upgraded the host to 13.04 and then 13.10 and now the 3 containers hang with this: >lxc-start -n as1 -l DEBUG -o $(tty) lxc-start 1383145786.513 INFO lxc_start_ui - using rcfile /var/lib/lxc/as1/config lxc-start 1383145786.513 WARN lxc_log - lxc_log_init called with log already initialized lxc-start 1383145786.513 INFO lxc_apparmor - aa_enabled set to 1 lxc-start 1383145786.514 DEBUG lxc_conf - allocated pty '/dev/pts/2' (5/6) lxc-start 1383145786.514 DEBUG lxc_conf - allocated pty '/dev/pts/13' (7/8) lxc-start 1383145786.514 DEBUG lxc_conf - allocated pty '/dev/pts/14' (9/10) lxc-start 1383145786.514 DEBUG lxc_conf - allocated pty '/dev/pts/15' (11/12) lxc-start 1383145786.514 DEBUG lxc_conf - allocated pty '/dev/pts/17' (13/14) lxc-start 1383145786.514 DEBUG lxc_conf - allocated pty '/dev/pts/18' (15/16) lxc-start 1383145786.514 DEBUG lxc_conf - allocated pty '/dev/pts/19' (17/18) lxc-start 1383145786.514 DEBUG lxc_conf - allocated pty '/dev/pts/20' (19/20) lxc-start 1383145786.514 INFO lxc_conf - tty's configured lxc-start 1383145786.514 DEBUG lxc_start - sigchild handler set lxc-start 1383145786.514 DEBUG lxc_console - opening /dev/tty for console peer lxc-start 1383145786.514 DEBUG lxc_console - using '/dev/tty' as console lxc-start 1383145786.514 DEBUG lxc_console - 6242 got SIGWINCH fd 25 lxc-start 1383145786.514 DEBUG lxc_console - set winsz dstfd:22 cols:177 rows:53 lxc-start 1383145786.514 INFO lxc_start - 'as1' is initialized lxc-start 1383145786.522 DEBUG lxc_start - Not dropping cap_sys_boot or watching utmp lxc-start 1383145786.524 DEBUG lxc_conf - mac address of host interface 'vethB4L35W' changed to private fe:7c:96:a0:ae:29 lxc-start 1383145786.525 DEBUG lxc_conf - instanciated veth 'vethB4L35W/vethVC61K2', index is '26' lxc-start 1383145786.529 DEBUG lxc_cgroup - cgroup 'memory.limit_in_bytes' set to '20G' lxc-start 1383145786.529 DEBUG lxc_cgroup - cgroup 'cpuset.cpus' set to '12-23' lxc-start 1383145786.529 INFO lxc_cgroup - cgroup has been setup lxc-start 1383145786.555 DEBUG lxc_conf - move 'eth0' to '6249' lxc-start 1383145786.555 INFO lxc_conf - 'as1' hostname has been setup lxc-start 1383145786.575 DEBUG lxc_conf - 'eth0' has been setup lxc-start 1383145786.575 INFO lxc_conf - network has been setup lxc-start 1383145786.575 INFO lxc_conf - looking at .44 42 252:0 / / rw,relatime - ext4 /dev/mapper/limitorderbook1-root rw,errors=remount-ro,data=ordered . lxc-start 1383145786.575 INFO lxc_conf - now p is . /. lxc-start 1383145786.575 INFO lxc_conf - looking at .52 44 0:5 / /dev rw,relatime - devtmpfs udev rw,size=32961632k,nr_inodes=8240408,mode=755 . lxc-start 1383145786.575 INFO lxc_conf - now p is . /dev. lxc-start 1383145786.575 INFO lxc_conf - looking at .61 52 0:11 / /dev/pts rw,nosuid,noexec,relatime - devpts devpts rw,mode=600,ptmxmode=000 . lxc-start 1383145786.575 INFO lxc_conf - now p is . /dev/pts. lxc-start 1383145786.575 INFO lxc_conf - looking at .68 44 0:15 / /run rw,nosuid,noexec,relatime - tmpfs tmpfs rw,size=6594456k,mode=755 . lxc-start 1383145786.575 INFO lxc_conf - now p is . /run. lxc-start 1383145786.575 INFO lxc_conf - looking at .69 68 0:18 / /run/lock rw,nosuid,nodev,noexec,relatime - tmpfs none rw,size=5120k . lxc-start 1383145786.575 INFO lxc_conf - now p is . /run/lock. lxc-start 1383145786.575 INFO lxc_conf - looking at .72 68 0:19 / /run/shm rw,nosuid,nodev,relatime - tmpfs none rw . lxc-start 1383145786.575 INFO lxc_conf - now p is . /run/shm. lxc-start 1383145786.575 INFO lxc_conf - looking at .73 68 0:21 / /run/user rw,nosuid,nodev,noexec,relatime - tmpfs none rw,size=102400k,mode=755 . lxc-start 1383145786.575 INFO lxc_conf - now p is . /run/user. lxc-start 1383145786.575 INFO lxc_conf - looking at .76 44 0:14 / /sys rw,nosuid,nodev,noexec,relatime - sysfs sysfs rw . lxc-start 1383145786.575 INFO lxc_conf - now p is . /sys. lxc-start 1383145786.575 INFO lxc_conf - looking at .77 76 0:16 / /sys/fs/cgroup rw,relatime - tmpfs none rw,size=4k,mode=755 . lxc-start 1383145786.575 INFO lxc_conf - now p is . /sys/fs/cgroup. lxc-start 1383145786.575 INFO lxc_conf - looking at .78 77 0:20 / /sys/fs/cgroup/cpuset rw,relatime - cgroup cgroup rw,cpuset,clone_children . lxc-start 1383145786.575 INFO lxc_conf - now p is . /sys/fs/cgroup/cpuset. lxc-start 1383145786.575 INFO lxc_conf - looking at .79 77 0:23 / /sys/fs/cgroup/cpu rw,relatime - cgroup cgroup rw,cpu . lxc-start 1383145786.575 INFO lxc_conf - now p is . /sys/fs/cgroup/cpu. lxc-start 1383145786.575 INFO lxc_conf - looking at .80 77 0:24 / /sys/fs/cgroup/cpuacct rw,relatime - cgroup cgroup rw,cpuacct . lxc-start 1383145786.575 INFO lxc_conf - now p is . /sys/fs/cgroup/cpuacct. lxc-start 1383145786.575 INFO lxc_conf - looking at .81 77 0:25 / /sys/fs/cgroup/memory rw,relatime - cgroup cgroup rw,memory . lxc-start 1383145786.575 INFO lxc_conf - now p is . /sys/fs/cgroup/memory. lxc-start 1383145786.575 INFO lxc_conf - looking at .82 77 0:26 / /sys/fs/cgroup/devices rw,relatime - cgroup cgroup rw,devices . lxc-start 1383145786.575 INFO lxc_conf - now p is . /sys/fs/cgroup/devices. lxc-start 1383145786.575 INFO lxc_conf - looking at .83 77 0:27 / /sys/fs/cgroup/freezer rw,relatime - cgroup cgroup rw,freezer . lxc-start 1383145786.575 INFO lxc_conf - now p is . /sys/fs/cgroup/freezer. lxc-start 1383145786.575 INFO lxc_conf - looking at .84 77 0:28 / /sys/fs/cgroup/blkio rw,relatime - cgroup cgroup rw,blkio . lxc-start 1383145786.575 INFO lxc_conf - now p is . /sys/fs/cgroup/blkio. lxc-start 1383145786.575 INFO lxc_conf - looking at .85 77 0:29 / /sys/fs/cgroup/perf_event rw,relatime - cgroup cgroup rw,perf_event . lxc-start 1383145786.575 INFO lxc_conf - now p is . /sys/fs/cgroup/perf_event. lxc-start 1383145786.575 INFO lxc_conf - looking at .94 77 0:30 / /sys/fs/cgroup/hugetlb rw,relatime - cgroup cgroup rw,hugetlb . lxc-start 1383145786.575 INFO lxc_conf - now p is . /sys/fs/cgroup/hugetlb. lxc-start 1383145786.575 INFO lxc_conf - looking at .95 77 0:31 / /sys/fs/cgroup/systemd rw,nosuid,nodev,noexec,relatime - cgroup systemd rw,name=systemd . lxc-start 1383145786.575 INFO lxc_conf - now p is . /sys/fs/cgroup/systemd. lxc-start 1383145786.575 INFO lxc_conf - looking at .96 76 0:17 / /sys/fs/fuse/connections rw,relatime - fusectl none rw . lxc-start 1383145786.575 INFO lxc_conf - now p is . /sys/fs/fuse/connections. lxc-start 1383145786.575 INFO lxc_conf - looking at .98 76 0:6 / /sys/kernel/debug rw,relatime - debugfs none rw . lxc-start 1383145786.575 INFO lxc_conf - now p is . /sys/kernel/debug. lxc-start 1383145786.575 INFO lxc_conf - looking at .101 76 0:10 / /sys/kernel/security rw,relatime - securityfs none rw . lxc-start 1383145786.575 INFO lxc_conf - now p is . /sys/kernel/security. lxc-start 1383145786.575 INFO lxc_conf - looking at .102 76 0:22 / /sys/fs/pstore rw,relatime - pstore none rw . lxc-start 1383145786.575 INFO lxc_conf - now p is . /sys/fs/pstore. lxc-start 1383145786.575 INFO lxc_conf - looking at .103 44 0:3 / /proc rw,nosuid,nodev,noexec,relatime - proc proc rw . lxc-start 1383145786.575 INFO lxc_conf - now p is . /proc. lxc-start 1383145786.575 INFO lxc_conf - looking at .104 44 9:2 / /data rw,relatime - ext4 /dev/md2 rw,errors=remount-ro,data=ordered . lxc-start 1383145786.575 INFO lxc_conf - now p is . /data. lxc-start 1383145786.575 INFO lxc_conf - looking at .105 44 8:1 / /boot rw,relatime - ext2 /dev/sda1 rw,errors=continue . lxc-start 1383145786.575 INFO lxc_conf - now p is . /boot. lxc-start 1383145786.576 DEBUG lxc_conf - mounted '/data/srv/lxc/as1' on '/usr/lib/x86_64-linux-gnu/lxc' lxc-start 1383145786.576 DEBUG lxc_conf - mounted 'none' on '/usr/lib/x86_64-linux-gnu/lxc//dev/pts', type 'devpts' lxc-start 1383145786.576 DEBUG lxc_conf - mounted 'none' on '/usr/lib/x86_64-linux-gnu/lxc//proc', type 'proc' lxc-start 1383145786.576 DEBUG lxc_conf - mounted 'none' on '/usr/lib/x86_64-linux-gnu/lxc//sys', type 'sysfs' lxc-start 1383145786.576 DEBUG lxc_conf - mounted 'none' on '/usr/lib/x86_64-linux-gnu/lxc//run', type 'tmpfs' lxc-start 1383145786.576 INFO lxc_conf - mount points have been setup lxc-start 1383145786.577 INFO lxc_conf - console has been setup lxc-start 1383145786.577 INFO lxc_conf - 8 tty(s) has been setup lxc-start 1383145786.577 INFO lxc_conf - rootfs path is ./data/srv/lxc/as1., mount is ./usr/lib/x86_64-linux-gnu/lxc. lxc-start 1383145786.577 INFO lxc_apparmor - I am 1, /proc/self points to 1 lxc-start 1383145786.577 DEBUG lxc_conf - created '/usr/lib/x86_64-linux-gnu/lxc/lxc_putold' directory lxc-start 1383145786.577 DEBUG lxc_conf - mountpoint for old rootfs is '/usr/lib/x86_64-linux-gnu/lxc/lxc_putold' lxc-start 1383145786.577 DEBUG lxc_conf - pivot_root syscall to '/usr/lib/x86_64-linux-gnu/lxc' successful lxc-start 1383145786.577 DEBUG lxc_conf - umounted '/lxc_putold/dev/pts' lxc-start 1383145786.577 DEBUG lxc_conf - umounted '/lxc_putold/run/lock' lxc-start 1383145786.577 DEBUG lxc_conf - umounted '/lxc_putold/run/shm' lxc-start 1383145786.577 DEBUG lxc_conf - umounted '/lxc_putold/run/user' lxc-start 1383145786.577 DEBUG lxc_conf - umounted '/lxc_putold/sys/fs/cgroup/cpuset' lxc-start 1383145786.577 DEBUG lxc_conf - umounted '/lxc_putold/sys/fs/cgroup/cpu' lxc-start 1383145786.577 DEBUG lxc_conf - umounted '/lxc_putold/sys/fs/cgroup/cpuacct' lxc-start 1383145786.577 DEBUG lxc_conf - umounted '/lxc_putold/sys/fs/cgroup/memory' lxc-start 1383145786.577 DEBUG lxc_conf - umounted '/lxc_putold/sys/fs/cgroup/devices' lxc-start 1383145786.577 DEBUG lxc_conf - umounted '/lxc_putold/sys/fs/cgroup/freezer' lxc-start 1383145786.577 DEBUG lxc_conf - umounted '/lxc_putold/sys/fs/cgroup/blkio' lxc-start 1383145786.577 DEBUG lxc_conf - umounted '/lxc_putold/sys/fs/cgroup/perf_event' lxc-start 1383145786.577 DEBUG lxc_conf - umounted '/lxc_putold/sys/fs/cgroup/hugetlb' lxc-start 1383145786.577 DEBUG lxc_conf - umounted '/lxc_putold/sys/fs/cgroup/systemd' lxc-start 1383145786.577 DEBUG lxc_conf - umounted '/lxc_putold/sys/fs/fuse/connections' lxc-start 1383145786.577 DEBUG lxc_conf - umounted '/lxc_putold/sys/kernel/debug' lxc-start 1383145786.577 DEBUG lxc_conf - umounted '/lxc_putold/sys/kernel/security' lxc-start 1383145786.577 DEBUG lxc_conf - umounted '/lxc_putold/sys/fs/pstore' lxc-start 1383145786.577 DEBUG lxc_conf - umounted '/lxc_putold/proc' lxc-start 1383145786.577 DEBUG lxc_conf - umounted '/lxc_putold/data' lxc-start 1383145786.577 DEBUG lxc_conf - umounted '/lxc_putold/boot' lxc-start 1383145786.577 DEBUG lxc_conf - umounted '/lxc_putold/dev' lxc-start 1383145786.577 DEBUG lxc_conf - umounted '/lxc_putold/run' lxc-start 1383145786.577 DEBUG lxc_conf - umounted '/lxc_putold/sys/fs/cgroup' lxc-start 1383145786.577 DEBUG lxc_conf - umounted '/lxc_putold/sys' lxc-start 1383145786.577 DEBUG lxc_conf - umounted '/lxc_putold' lxc-start 1383145786.577 INFO lxc_conf - created new pts instance lxc-start 1383145786.578 DEBUG lxc_conf - drop capability 'sys_boot' (22) lxc-start 1383145786.578 DEBUG lxc_conf - capabilities have been setup lxc-start 1383145786.578 NOTICE lxc_conf - 'as1' is setup. lxc-start 1383145786.578 DEBUG lxc_cgroup - cgroup 'memory.limit_in_bytes' set to '20G' lxc-start 1383145786.578 DEBUG lxc_cgroup - cgroup 'cpuset.cpus' set to '12-23' lxc-start 1383145786.578 INFO lxc_cgroup - cgroup has been setup lxc-start 1383145786.578 INFO lxc_apparmor - setting up apparmor lxc-start 1383145786.578 INFO lxc_apparmor - changed apparmor profile to lxc-container-default lxc-start 1383145786.578 NOTICE lxc_start - exec'ing '/sbin/init' lxc-start 1383145786.578 INFO lxc_conf - looking at .15 20 0:14 / /sys rw,nosuid,nodev,noexec,relatime - sysfs sysfs rw . lxc-start 1383145786.578 INFO lxc_conf - now p is . /sys. lxc-start 1383145786.578 INFO lxc_conf - looking at .16 20 0:3 / /proc rw,nosuid,nodev,noexec,relatime - proc proc rw . lxc-start 1383145786.578 INFO lxc_conf - now p is . /proc. lxc-start 1383145786.578 INFO lxc_conf - looking at .17 20 0:5 / /dev rw,relatime - devtmpfs udev rw,size=32961632k,nr_inodes=8240408,mode=755 . lxc-start 1383145786.578 INFO lxc_conf - now p is . /dev. lxc-start 1383145786.578 INFO lxc_conf - looking at .18 17 0:11 / /dev/pts rw,nosuid,noexec,relatime - devpts devpts rw,mode=600,ptmxmode=000 . lxc-start 1383145786.578 INFO lxc_conf - now p is . /dev/pts. lxc-start 1383145786.578 INFO lxc_conf - looking at .19 20 0:15 / /run rw,nosuid,noexec,relatime - tmpfs tmpfs rw,size=6594456k,mode=755 . lxc-start 1383145786.578 INFO lxc_conf - now p is . /run. lxc-start 1383145786.578 INFO lxc_conf - looking at .20 1 252:0 / / rw,relatime - ext4 /dev/mapper/limitorderbook1-root rw,errors=remount-ro,data=ordered . lxc-start 1383145786.578 INFO lxc_conf - now p is . /. lxc-start 1383145786.578 INFO lxc_conf - looking at .22 15 0:16 / /sys/fs/cgroup rw,relatime - tmpfs none rw,size=4k,mode=755 . lxc-start 1383145786.578 INFO lxc_conf - now p is . /sys/fs/cgroup. lxc-start 1383145786.578 INFO lxc_conf - looking at .23 15 0:17 / /sys/fs/fuse/connections rw,relatime - fusectl none rw . lxc-start 1383145786.578 INFO lxc_conf - now p is . /sys/fs/fuse/connections. lxc-start 1383145786.578 INFO lxc_conf - looking at .24 15 0:6 / /sys/kernel/debug rw,relatime - debugfs none rw . lxc-start 1383145786.579 INFO lxc_conf - now p is . /sys/kernel/debug. lxc-start 1383145786.579 INFO lxc_conf - looking at .25 15 0:10 / /sys/kernel/security rw,relatime - securityfs none rw . lxc-start 1383145786.579 INFO lxc_conf - now p is . /sys/kernel/security. lxc-start 1383145786.579 INFO lxc_conf - looking at .26 19 0:18 / /run/lock rw,nosuid,nodev,noexec,relatime - tmpfs none rw,size=5120k . lxc-start 1383145786.579 INFO lxc_conf - now p is . /run/lock. lxc-start 1383145786.579 INFO lxc_conf - looking at .27 19 0:19 / /run/shm rw,nosuid,nodev,relatime - tmpfs none rw . lxc-start 1383145786.579 INFO lxc_conf - now p is . /run/shm. lxc-start 1383145786.579 INFO lxc_conf - looking at .28 22 0:20 / /sys/fs/cgroup/cpuset rw,relatime - cgroup cgroup rw,cpuset,clone_children . lxc-start 1383145786.579 INFO lxc_conf - now p is . /sys/fs/cgroup/cpuset. lxc-start 1383145786.579 INFO lxc_conf - looking at .29 19 0:21 / /run/user rw,nosuid,nodev,noexec,relatime - tmpfs none rw,size=102400k,mode=755 . lxc-start 1383145786.579 INFO lxc_conf - now p is . /run/user. lxc-start 1383145786.579 INFO lxc_conf - looking at .30 15 0:22 / /sys/fs/pstore rw,relatime - pstore none rw . lxc-start 1383145786.579 INFO lxc_conf - now p is . /sys/fs/pstore. lxc-start 1383145786.579 INFO lxc_conf - looking at .31 22 0:23 / /sys/fs/cgroup/cpu rw,relatime - cgroup cgroup rw,cpu . lxc-start 1383145786.579 INFO lxc_conf - now p is . /sys/fs/cgroup/cpu. lxc-start 1383145786.579 INFO lxc_conf - looking at .32 22 0:24 / /sys/fs/cgroup/cpuacct rw,relatime - cgroup cgroup rw,cpuacct . lxc-start 1383145786.579 INFO lxc_conf - now p is . /sys/fs/cgroup/cpuacct. lxc-start 1383145786.579 INFO lxc_conf - looking at .33 22 0:25 / /sys/fs/cgroup/memory rw,relatime - cgroup cgroup rw,memory . lxc-start 1383145786.579 INFO lxc_conf - now p is . /sys/fs/cgroup/memory. lxc-start 1383145786.579 INFO lxc_conf - looking at .34 22 0:26 / /sys/fs/cgroup/devices rw,relatime - cgroup cgroup rw,devices . lxc-start 1383145786.579 INFO lxc_conf - now p is . /sys/fs/cgroup/devices. lxc-start 1383145786.579 INFO lxc_conf - looking at .35 22 0:27 / /sys/fs/cgroup/freezer rw,relatime - cgroup cgroup rw,freezer . lxc-start 1383145786.579 INFO lxc_conf - now p is . /sys/fs/cgroup/freezer. lxc-start 1383145786.579 INFO lxc_conf - looking at .36 22 0:28 / /sys/fs/cgroup/blkio rw,relatime - cgroup cgroup rw,blkio . lxc-start 1383145786.579 INFO lxc_conf - now p is . /sys/fs/cgroup/blkio. lxc-start 1383145786.579 INFO lxc_conf - looking at .37 22 0:29 / /sys/fs/cgroup/perf_event rw,relatime - cgroup cgroup rw,perf_event . lxc-start 1383145786.579 INFO lxc_conf - now p is . /sys/fs/cgroup/perf_event. lxc-start 1383145786.579 INFO lxc_conf - looking at .38 22 0:30 / /sys/fs/cgroup/hugetlb rw,relatime - cgroup cgroup rw,hugetlb . lxc-start 1383145786.579 INFO lxc_conf - now p is . /sys/fs/cgroup/hugetlb. lxc-start 1383145786.579 INFO lxc_conf - looking at .39 20 9:2 / /data rw,relatime - ext4 /dev/md2 rw,errors=remount-ro,data=ordered . lxc-start 1383145786.579 INFO lxc_conf - now p is . /data. lxc-start 1383145786.579 INFO lxc_conf - looking at .40 20 8:1 / /boot rw,relatime - ext2 /dev/sda1 rw,errors=continue . lxc-start 1383145786.579 INFO lxc_conf - now p is . /boot. lxc-start 1383145786.579 INFO lxc_conf - looking at .41 22 0:31 / /sys/fs/cgroup/systemd rw,nosuid,nodev,noexec,relatime - cgroup systemd rw,name=systemd . lxc-start 1383145786.579 INFO lxc_conf - now p is . /sys/fs/cgroup/systemd. lxc-start 1383145786.579 NOTICE lxc_start - '/sbin/init' started with pid '6249' lxc-start 1383145786.579 WARN lxc_start - invalid pid for SIGCHLD <4>init: ureadahead main process (7) terminated with status 5 <4>init: console-font main process (94) terminated with status 1 And it will just sit there like that for hours at least. The container becomes pingable but I can't ssh and if I try lxc-console -n as1 I get a blank screen. If I do lxc-stop -n as1 or ^C in the window where it has hung I get: ^CTERM environment variable not set. <4>init: plymouth-upstart-bridge main process (192) terminated with status 1 <4>init: hwclock-save main process (187) terminated with status 70 * Asking all remaining processes to terminate... ...done. * All processes ended within 1 seconds... ...done. * Deactivating swap... ...fail! mount: cannot mount block device /dev/md2 read-only * Will now restart But after 20 minutes it hasn't restarted. Any ideas why these containers are hanging?

  Read the article

• 2010 April Fools Joke

  - by Dane Morgridge

  I started at my current job at the end of March last year and there were some pretty funny April fools jokes.  Nothing super crazy, but pretty funny.  One guy came in and there was a tree in his cube.  We (me and the rest of my team) were planning for a couple of weeks on what we could do that would be just awesome.  We had a lot of really good ideas but nothing was spectacular.  Then Steve Andrews had a brilliant idea (yes it's true).  Since we have internal DNS servers we could redirect DNS to our internal servers for a site such as cnn.com.  Then we would lift the code from the site and create our own home page that would contain news about people in the company.  Steve was actually laughing so hard when he thought of the idea that it took him almost 30 minutes to spit it out. I thought, "this is perfect". I had enlisted a couple of people to help come up with the stories and at the same time we were trying to figure out how to get everybody to the site the morning of the 1st.  Then it hit me.  We could have the main article be one of my getting picked up by the FBI on hacking charges.  Then Chris (my boss) could send an email out telling everyone that I would not be there today and direct them to the site.  That would for sure get everyone to go to cnn.com first thing and see our prank.  I begun the process of looking for photos I could crop myself into and found the perfect one.  Then my wife took a good pic with our Canon 40D and I went to work.  The night before I didn't have any other stories due to everyone being really busy at work, but I decided to go ahead with just the FBI bust on it's own.  I got everything working and tested and coordinated with Chris for me to come in late so no one would see me at the office until after everyone had seen the joke. And so the morning of April fools came and I was waiting at home and the email was perfect.  Chris told everyone that I wouldn't be in and that not to answer any questions if you got any calls from anybody.  The Photoshop job I did was not perfect, but good enough and I even wrote an article with it that went into more detail about how I had been classified as a terrorist and all kinds of stuff. People at work started getting the emails and a few people didn't realize it was a joke (as I had hoped), including some from senior management (one person in particular who shall remain nameless in this post).  Emails started flying around about how to contain the situation and how to handle bad PR.  He basically bought it hook, line and sinker and then went in to crisis mode.  It was awesome! He did finally realize it was a joke and I will likely print and frame the email he sent out.  In short, April fools this year was a huge success.

  Read the article

• Juju stuck in "pending" state when using LXC

  - by Andre

  So I'm trying to get started with Juju, and tried to do this locally using LXC. I followed the instructions here: How do I configure juju for local usage? Unfortunately this doesn't seem to work for me. status shows the following: $ juju status machines: 0: agent-state: running dns-name: localhost instance-id: local instance-state: running services: mysql: charm: cs:precise/mysql-1 relations: db: - wordpress units: mysql/0: agent-state: pending machine: 0 public-address: null wordpress: charm: cs:precise/wordpress-0 exposed: true relations: db: - mysql units: wordpress/0: agent-state: pending machine: 0 open-ports: [] public-address: null 2012-05-10 14:09:38,155 INFO 'status' command finished successfully As you can see the agent-state is 'pending' and there is no public address where I'm able to access the newly created site. Am I missing something here? UPDATE: Tried destroying the environment an doing everything again (multiple times). This is the output for debug-log: ~$ juju debug-log 2012-05-11 08:50:23,790 INFO Enabling distributed debug log. 2012-05-11 08:50:23,806 INFO Tailing logs - Ctrl-C to stop. 2012-05-11 08:50:42,338 Machine:0: juju.agents.machine DEBUG: Units changed old:set([]) new:set(['mysql/0']) 2012-05-11 08:50:42,339 Machine:0: juju.agents.machine DEBUG: Starting service unit: mysql/0 ... 2012-05-11 08:50:42,459 Machine:0: unit.deploy DEBUG: Downloading charm cs:precise/mysql-1 to /home/andre/.juju/data/andre-local/charms 2012-05-11 08:50:42,620 Machine:0: unit.deploy DEBUG: Using <juju.machine.unit.UnitContainerDeployment object at 0x9c54b6c> for mysql/0 in /home/andre/.juju/data/andre-local 2012-05-11 08:50:42,648 Machine:0: unit.deploy DEBUG: Starting service unit mysql/0... 2012-05-11 08:50:42,649 Machine:0: unit.deploy DEBUG: Creating master container... 2012-05-11 08:54:33,992 Machine:0: unit.deploy DEBUG: Created master container andre-local-0-template 2012-05-11 08:54:33,993 Machine:0: unit.deploy INFO: Creating container mysql-0... 2012-05-11 08:56:18,760 Machine:0: unit.deploy INFO: Container created for mysql/0 2012-05-11 08:56:19,466 Machine:0: unit.deploy DEBUG: Charm extracted into container 2012-05-11 08:56:19,569 Machine:0: unit.deploy DEBUG: Starting container... 2012-05-11 08:56:22,707 Machine:0: unit.deploy INFO: Started container for mysql/0 2012-05-11 08:56:22,707 Machine:0: unit.deploy INFO: Started service unit mysql/0 2012-05-11 08:56:23,012 Machine:0: juju.agents.machine DEBUG: Units changed old:set(['mysql/0']) new:set(['wordpress/0', 'mysql/0']) 2012-05-11 08:56:23,039 Machine:0: juju.agents.machine DEBUG: Starting service unit: wordpress/0 ... 2012-05-11 08:56:23,154 Machine:0: unit.deploy DEBUG: Downloading charm cs:precise/wordpress-0 to /home/andre/.juju/data/andre-local/charms 2012-05-11 08:56:23,396 Machine:0: unit.deploy DEBUG: Using <juju.machine.unit.UnitContainerDeployment object at 0x9c519cc> for wordpress/0 in /home/andre/.juju/data/andre-local 2012-05-11 08:56:23,620 Machine:0: unit.deploy DEBUG: Starting service unit wordpress/0... 2012-05-11 08:56:23,621 Machine:0: unit.deploy INFO: Creating container wordpress-0... 2012-05-11 08:58:24,739 Machine:0: unit.deploy INFO: Container created for wordpress/0 2012-05-11 08:58:25,163 Machine:0: unit.deploy DEBUG: Charm extracted into container 2012-05-11 08:58:25,397 Machine:0: unit.deploy DEBUG: Starting container... 2012-05-11 08:58:27,982 Machine:0: unit.deploy INFO: Started container for wordpress/0 2012-05-11 08:58:27,983 Machine:0: unit.deploy INFO: Started service unit wordpress/0 This is the result for the status command (with verbose flag): ~$ juju -v status 2012-05-11 08:51:53,464 DEBUG Initializing juju status runtime 2012-05-11 08:51:53,625:4030(0xb7345b00):ZOO_INFO@log_env@658: Client environment:zookeeper.version=zookeeper C client 3.3.5 2012-05-11 08:51:53,625:4030(0xb7345b00):ZOO_INFO@log_env@662: Client environment:host.name=andre-ufo 2012-05-11 08:51:53,625:4030(0xb7345b00):ZOO_INFO@log_env@669: Client environment:os.name=Linux 2012-05-11 08:51:53,625:4030(0xb7345b00):ZOO_INFO@log_env@670: Client environment:os.arch=3.2.0-24-generic-pae 2012-05-11 08:51:53,625:4030(0xb7345b00):ZOO_INFO@log_env@671: Client environment:os.version=#37-Ubuntu SMP Wed Apr 25 10:47:59 UTC 2012 2012-05-11 08:51:53,626:4030(0xb7345b00):ZOO_INFO@log_env@679: Client environment:user.name=andre 2012-05-11 08:51:53,626:4030(0xb7345b00):ZOO_INFO@log_env@687: Client environment:user.home=/home/andre 2012-05-11 08:51:53,626:4030(0xb7345b00):ZOO_INFO@log_env@699: Client environment:user.dir=/home/andre 2012-05-11 08:51:53,626:4030(0xb7345b00):ZOO_INFO@zookeeper_init@727: Initiating client connection, host=192.168.122.1:41779 sessionTimeout=10000 watcher=0xb7780620 sessionId=0 sessionPasswd=<null> context=0x9242ee8 flags=0 2012-05-11 08:51:53,627:4030(0xb6b90b40):ZOO_INFO@check_events@1585: initiated connection to server [192.168.122.1:41779] 2012-05-11 08:51:53,649:4030(0xb6b90b40):ZOO_INFO@check_events@1632: session establishment complete on server [192.168.122.1:41779], sessionId=0x1373ae057d90007, negotiated timeout=10000 2012-05-11 08:51:53,651 DEBUG Environment is initialized. machines: 0: agent-state: running dns-name: localhost instance-id: local instance-state: running services: mysql: charm: cs:precise/mysql-1 relations: db: - wordpress units: mysql/0: agent-state: pending machine: 0 public-address: null wordpress: charm: cs:precise/wordpress-0 relations: db: - mysql units: wordpress/0: agent-state: pending machine: 0 public-address: null

  Read the article

• Watch Netflix Instant Movies in Boxee

  - by DigitalGeekery

  Boxee is multi-platform Media PC application with a host of media applications. One of which is the popular Movie service, Netflix. Today we’ll show you how to get setup to watch Netflix Instant streaming video in Boxee. Note: Nexflix requires Microsoft Silverlight which unfortunately means Boxee users running Linux out of luck. What You’ll Need A Netflix account Authorize your Netflix account with Boxee Install Microsoft Silverlight Authorize Your Netflix Account First, we need to authorize our Netflix account with Boxee. (See link below). Type in your Boxee username and password and click “Login.”  When prompted, click “Authorize.”   Click “Yes, Link This Account.”    Install Silverlight If you don’t already have Silverlight installed, you’ll need to do so. See the download link at the end of the article.   Log into Boxee Now we’re ready to log into Boxee. Once logged in, click on “Apps” on the Home screen.   From the My Apps screen click on Netflix. Then click “Start.” Click “Yes” to enable the cookie.   Now you’ll enter the Netflix App. From here, you can browse your Instant Queue, Recommendations, New Arrivals, Browse Genre, or Search for available titles.   Click on a selection you’d like to watch. From here, you can Play, Rate, or even add the title to your regular Netflix Queue.   With a remote or the on-screen controls you can pause, stop, play, and skip forward or back through the video.   Now you’re all set to enjoy the Netflix Instant library with Boxee. Netflix Instant is one of many great Apps included with Boxee. While the current available selection isn’t exactly overwhelming, most subscribers will likely find enough to keep themselves entertained in between DVD deliveries. Haven’t tried Boxee yet? Check out our article on getting started with Boxee. Links Authorize your Netflix account with Boxee Install Microsoft Silverlight Similar Articles Productive Geek Tips Using Netflix Watchnow in Windows Vista Media Center (Gmedia)Find Movies and TV Based on your Mood with JinniGetting Started with BoxeeQuickly Find Movies to Watch at Hello MoviesIntegrate Boxee with Media Center in Windows 7 TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips Revo Uninstaller Pro Registry Mechanic 9 for Windows PC Tools Internet Security Suite 2010 PCmover Professional Change DNS servers on the fly with DNS Jumper Live PDF Searches PDF Files and Ebooks Converting Mp4 to Mp3 Easily Use Quick Translator to Translate Text in 50 Languages (Firefox) Get Better Windows Search With UltraSearch Scan News With NY Times Article Skimmer

  Read the article

• Squid + Dans Guardian (simple configuration)

  - by The Digital Ninja

  I just built a new proxy server and compiled the latest versions of squid and dansguardian. We use basic authentication to select what users are allowed outside of our network. It seems squid is working just fine and accepts my username and password and lets me out. But if i connect to dans guardian, it prompts for username and password and then displays a message saying my username is not allowed to access the internet. Its pulling my username for the error message so i know it knows who i am. The part i get confused on is i thought that part was handled all by squid, and squid is working flawlessly. Can someone please double check my config files and tell me if i'm missing something or there is some new option i must set to get this to work. dansguardian.conf # Web Access Denied Reporting (does not affect logging) # # -1 = log, but do not block - Stealth mode # 0 = just say 'Access Denied' # 1 = report why but not what denied phrase # 2 = report fully # 3 = use HTML template file (accessdeniedaddress ignored) - recommended # reportinglevel = 3 # Language dir where languages are stored for internationalisation. # The HTML template within this dir is only used when reportinglevel # is set to 3. When used, DansGuardian will display the HTML file instead of # using the perl cgi script. This option is faster, cleaner # and easier to customise the access denied page. # The language file is used no matter what setting however. # languagedir = '/etc/dansguardian/languages' # language to use from languagedir. language = 'ukenglish' # Logging Settings # # 0 = none 1 = just denied 2 = all text based 3 = all requests loglevel = 3 # Log Exception Hits # Log if an exception (user, ip, URL, phrase) is matched and so # the page gets let through. Can be useful for diagnosing # why a site gets through the filter. on | off logexceptionhits = on # Log File Format # 1 = DansGuardian format 2 = CSV-style format # 3 = Squid Log File Format 4 = Tab delimited logfileformat = 1 # Log file location # # Defines the log directory and filename. #loglocation = '/var/log/dansguardian/access.log' # Network Settings # # the IP that DansGuardian listens on. If left blank DansGuardian will # listen on all IPs. That would include all NICs, loopback, modem, etc. # Normally you would have your firewall protecting this, but if you want # you can limit it to only 1 IP. Yes only one. filterip = # the port that DansGuardian listens to. filterport = 8080 # the ip of the proxy (default is the loopback - i.e. this server) proxyip = 127.0.0.1 # the port DansGuardian connects to proxy on proxyport = 3128 # accessdeniedaddress is the address of your web server to which the cgi # dansguardian reporting script was copied # Do NOT change from the default if you are not using the cgi. # accessdeniedaddress = 'http://YOURSERVER.YOURDOMAIN/cgi-bin/dansguardian.pl' # Non standard delimiter (only used with accessdeniedaddress) # Default is enabled but to go back to the original standard mode dissable it. nonstandarddelimiter = on # Banned image replacement # Images that are banned due to domain/url/etc reasons including those # in the adverts blacklists can be replaced by an image. This will, # for example, hide images from advert sites and remove broken image # icons from banned domains. # 0 = off # 1 = on (default) usecustombannedimage = 1 custombannedimagefile = '/etc/dansguardian/transparent1x1.gif' # Filter groups options # filtergroups sets the number of filter groups. A filter group is a set of content # filtering options you can apply to a group of users. The value must be 1 or more. # DansGuardian will automatically look for dansguardianfN.conf where N is the filter # group. To assign users to groups use the filtergroupslist option. All users default # to filter group 1. You must have some sort of authentication to be able to map users # to a group. The more filter groups the more copies of the lists will be in RAM so # use as few as possible. filtergroups = 1 filtergroupslist = '/etc/dansguardian/filtergroupslist' # Authentication files location bannediplist = '/etc/dansguardian/bannediplist' exceptioniplist = '/etc/dansguardian/exceptioniplist' banneduserlist = '/etc/dansguardian/banneduserlist' exceptionuserlist = '/etc/dansguardian/exceptionuserlist' # Show weighted phrases found # If enabled then the phrases found that made up the total which excedes # the naughtyness limit will be logged and, if the reporting level is # high enough, reported. on | off showweightedfound = on # Weighted phrase mode # There are 3 possible modes of operation: # 0 = off = do not use the weighted phrase feature. # 1 = on, normal = normal weighted phrase operation. # 2 = on, singular = each weighted phrase found only counts once on a page. # weightedphrasemode = 2 # Positive result caching for text URLs # Caches good pages so they don't need to be scanned again # 0 = off (recommended for ISPs with users with disimilar browsing) # 1000 = recommended for most users # 5000 = suggested max upper limit urlcachenumber = # # Age before they are stale and should be ignored in seconds # 0 = never # 900 = recommended = 15 mins urlcacheage = # Smart and Raw phrase content filtering options # Smart is where the multiple spaces and HTML are removed before phrase filtering # Raw is where the raw HTML including meta tags are phrase filtered # CPU usage can be effectively halved by using setting 0 or 1 # 0 = raw only # 1 = smart only # 2 = both (default) phrasefiltermode = 2 # Lower casing options # When a document is scanned the uppercase letters are converted to lower case # in order to compare them with the phrases. However this can break Big5 and # other 16-bit texts. If needed preserve the case. As of version 2.7.0 accented # characters are supported. # 0 = force lower case (default) # 1 = do not change case preservecase = 0 # Hex decoding options # When a document is scanned it can optionally convert %XX to chars. # If you find documents are getting past the phrase filtering due to encoding # then enable. However this can break Big5 and other 16-bit texts. # 0 = disabled (default) # 1 = enabled hexdecodecontent = 0 # Force Quick Search rather than DFA search algorithm # The current DFA implementation is not totally 16-bit character compatible # but is used by default as it handles large phrase lists much faster. # If you wish to use a large number of 16-bit character phrases then # enable this option. # 0 = off (default) # 1 = on (Big5 compatible) forcequicksearch = 0 # Reverse lookups for banned site and URLs. # If set to on, DansGuardian will look up the forward DNS for an IP URL # address and search for both in the banned site and URL lists. This would # prevent a user from simply entering the IP for a banned address. # It will reduce searching speed somewhat so unless you have a local caching # DNS server, leave it off and use the Blanket IP Block option in the # bannedsitelist file instead. reverseaddresslookups = off # Reverse lookups for banned and exception IP lists. # If set to on, DansGuardian will look up the forward DNS for the IP # of the connecting computer. This means you can put in hostnames in # the exceptioniplist and bannediplist. # It will reduce searching speed somewhat so unless you have a local DNS server, # leave it off. reverseclientiplookups = off # Build bannedsitelist and bannedurllist cache files. # This will compare the date stamp of the list file with the date stamp of # the cache file and will recreate as needed. # If a bsl or bul .processed file exists, then that will be used instead. # It will increase process start speed by 300%. On slow computers this will # be significant. Fast computers do not need this option. on | off createlistcachefiles = on # POST protection (web upload and forms) # does not block forms without any file upload, i.e. this is just for # blocking or limiting uploads # measured in kibibytes after MIME encoding and header bumph # use 0 for a complete block # use higher (e.g. 512 = 512Kbytes) for limiting # use -1 for no blocking #maxuploadsize = 512 #maxuploadsize = 0 maxuploadsize = -1 # Max content filter page size # Sometimes web servers label binary files as text which can be very # large which causes a huge drain on memory and cpu resources. # To counter this, you can limit the size of the document to be # filtered and get it to just pass it straight through. # This setting also applies to content regular expression modification. # The size is in Kibibytes - eg 2048 = 2Mb # use 0 for no limit maxcontentfiltersize = # Username identification methods (used in logging) # You can have as many methods as you want and not just one. The first one # will be used then if no username is found, the next will be used. # * proxyauth is for when basic proxy authentication is used (no good for # transparent proxying). # * ntlm is for when the proxy supports the MS NTLM authentication # protocol. (Only works with IE5.5 sp1 and later). **NOT IMPLEMENTED** # * ident is for when the others don't work. It will contact the computer # that the connection came from and try to connect to an identd server # and query it for the user owner of the connection. usernameidmethodproxyauth = on usernameidmethodntlm = off # **NOT IMPLEMENTED** usernameidmethodident = off # Preemptive banning - this means that if you have proxy auth enabled and a user accesses # a site banned by URL for example they will be denied straight away without a request # for their user and pass. This has the effect of requiring the user to visit a clean # site first before it knows who they are and thus maybe an admin user. # This is how DansGuardian has always worked but in some situations it is less than # ideal. So you can optionally disable it. Default is on. # As a side effect disabling this makes AD image replacement work better as the mime # type is know. preemptivebanning = on # Misc settings # if on it adds an X-Forwarded-For: <clientip> to the HTTP request # header. This may help solve some problem sites that need to know the # source ip. on | off forwardedfor = on # if on it uses the X-Forwarded-For: <clientip> to determine the client # IP. This is for when you have squid between the clients and DansGuardian. # Warning - headers are easily spoofed. on | off usexforwardedfor = off # if on it logs some debug info regarding fork()ing and accept()ing which # can usually be ignored. These are logged by syslog. It is safe to leave # it on or off logconnectionhandlingerrors = on # Fork pool options # sets the maximum number of processes to sporn to handle the incomming # connections. Max value usually 250 depending on OS. # On large sites you might want to try 180. maxchildren = 180 # sets the minimum number of processes to sporn to handle the incomming connections. # On large sites you might want to try 32. minchildren = 32 # sets the minimum number of processes to be kept ready to handle connections. # On large sites you might want to try 8. minsparechildren = 8 # sets the minimum number of processes to sporn when it runs out # On large sites you might want to try 10. preforkchildren = 10 # sets the maximum number of processes to have doing nothing. # When this many are spare it will cull some of them. # On large sites you might want to try 64. maxsparechildren = 64 # sets the maximum age of a child process before it croaks it. # This is the number of connections they handle before exiting. # On large sites you might want to try 10000. maxagechildren = 5000 # Process options # (Change these only if you really know what you are doing). # These options allow you to run multiple instances of DansGuardian on a single machine. # Remember to edit the log file path above also if that is your intention. # IPC filename # # Defines IPC server directory and filename used to communicate with the log process. ipcfilename = '/tmp/.dguardianipc' # URL list IPC filename # # Defines URL list IPC server directory and filename used to communicate with the URL # cache process. urlipcfilename = '/tmp/.dguardianurlipc' # PID filename # # Defines process id directory and filename. #pidfilename = '/var/run/dansguardian.pid' # Disable daemoning # If enabled the process will not fork into the background. # It is not usually advantageous to do this. # on|off ( defaults to off ) nodaemon = off # Disable logging process # on|off ( defaults to off ) nologger = off # Daemon runas user and group # This is the user that DansGuardian runs as. Normally the user/group nobody. # Uncomment to use. Defaults to the user set at compile time. # daemonuser = 'nobody' # daemongroup = 'nobody' # Soft restart # When on this disables the forced killing off all processes in the process group. # This is not to be confused with the -g run time option - they are not related. # on|off ( defaults to off ) softrestart = off maxcontentramcachescansize = 2000 maxcontentfilecachescansize = 20000 downloadmanager = '/etc/dansguardian/downloadmanagers/default.conf' authplugin = '/etc/dansguardian/authplugins/proxy-basic.conf' Squid.conf http_port 3128 hierarchy_stoplist cgi-bin ? acl QUERY urlpath_regex cgi-bin \? cache deny QUERY acl apache rep_header Server ^Apache #broken_vary_encoding allow apache access_log /squid/var/logs/access.log squid hosts_file /etc/hosts auth_param basic program /squid/libexec/ncsa_auth /squid/etc/userbasic.auth auth_param basic children 5 auth_param basic realm proxy auth_param basic credentialsttl 2 hours auth_param basic casesensitive off refresh_pattern ^ftp: 1440 20% 10080 refresh_pattern ^gopher: 1440 0% 1440 refresh_pattern . 0 20% 4320 acl NoAuthNec src <HIDDEN FOR SECURITY> acl BrkRm src <HIDDEN FOR SECURITY> acl Dials src <HIDDEN FOR SECURITY> acl Comps src <HIDDEN FOR SECURITY> acl whsws dstdom_regex -i .opensuse.org .novell.com .suse.com mirror.mcs.an1.gov mirrors.kernerl.org www.suse.de suse.mirrors.tds.net mirrros.usc.edu ftp.ale.org suse.cs.utah.edu mirrors.usc.edu mirror.usc.an1.gov linux.nssl.noaa.gov noaa.gov .kernel.org ftp.ale.org ftp.gwdg.de .medibuntu.org mirrors.xmission.com .canonical.com .ubuntu. acl opensites dstdom_regex -i .mbsbooks.com .bowker.com .usps.com .usps.gov .ups.com .fedex.com go.microsoft.com .microsoft.com .apple.com toolbar.msn.com .contacts.msn.com update.services.openoffice.org fms2.pointroll.speedera.net services.wmdrm.windowsmedia.com windowsupdate.com .adobe.com .symantec.com .vitalbook.com vxn1.datawire.net vxn.datawire.net download.lavasoft.de .download.lavasoft.com .lavasoft.com updates.ls-servers.com .canadapost. .myyellow.com minirick symantecliveupdate.com wm.overdrive.com www.overdrive.com productactivation.one.microsoft.com www.update.microsoft.com testdrive.whoson.com www.columbia.k12.mo.us banners.wunderground.com .kofax.com .gotomeeting.com tools.google.com .dl.google.com .cache.googlevideo.com .gpdl.google.com .clients.google.com cache.pack.google.com kh.google.com maps.google.com auth.keyhole.com .contacts.msn.com .hrblock.com .taxcut.com .merchantadvantage.com .jtv.com .malwarebytes.org www.google-analytics.com dcs.support.xerox.com .dhl.com .webtrendslive.com javadl-esd.sun.com javadl-alt.sun.com .excelsior.edu .dhlglobalmail.com .nessus.org .foxitsoftware.com foxit.vo.llnwd.net installshield.com .mindjet.com .mediascouter.com media.us.elsevierhealth.com .xplana.com .govtrack.us sa.tulsacc.edu .omniture.com fpdownload.macromedia.com webservices.amazon.com acl password proxy_auth REQUIRED acl all src all acl manager proto cache_object acl localhost src 127.0.0.1/255.255.255.255 acl to_localhost dst 127.0.0.0/8 acl SSL_ports port 443 563 631 2001 2005 8731 9001 9080 10000 acl Safe_ports port 80 # http acl Safe_ports port 21 # ftp acl Safe_ports port # https, snews 443 563 acl Safe_ports port 70 # gopher acl Safe_ports port 210 # wais acl Safe_ports port # unregistered ports 1936-65535 acl Safe_ports port 280 # http-mgmt acl Safe_ports port 488 # gss-http acl Safe_ports port 10000 acl Safe_ports port 631 acl Safe_ports port 901 # SWAT acl purge method PURGE acl CONNECT method CONNECT acl UTubeUsers proxy_auth "/squid/etc/utubeusers.list" acl RestrictUTube dstdom_regex -i youtube.com acl RestrictFacebook dstdom_regex -i facebook.com acl FacebookUsers proxy_auth "/squid/etc/facebookusers.list" acl BuemerKEC src 10.10.128.0/24 acl MBSsortnet src 10.10.128.0/26 acl MSNExplorer browser -i MSN acl Printers src <HIDDEN FOR SECURITY> acl SpecialFolks src <HIDDEN FOR SECURITY> # streaming download acl fails rep_mime_type ^.*mms.* acl fails rep_mime_type ^.*ms-hdr.* acl fails rep_mime_type ^.*x-fcs.* acl fails rep_mime_type ^.*x-ms-asf.* acl fails2 urlpath_regex dvrplayer mediastream mms:// acl fails2 urlpath_regex \.asf$ \.afx$ \.flv$ \.swf$ acl deny_rep_mime_flashvideo rep_mime_type -i video/flv acl deny_rep_mime_shockwave rep_mime_type -i ^application/x-shockwave-flash$ acl x-type req_mime_type -i ^application/octet-stream$ acl x-type req_mime_type -i application/octet-stream acl x-type req_mime_type -i ^application/x-mplayer2$ acl x-type req_mime_type -i application/x-mplayer2 acl x-type req_mime_type -i ^application/x-oleobject$ acl x-type req_mime_type -i application/x-oleobject acl x-type req_mime_type -i application/x-pncmd acl x-type req_mime_type -i ^video/x-ms-asf$ acl x-type2 rep_mime_type -i ^application/octet-stream$ acl x-type2 rep_mime_type -i application/octet-stream acl x-type2 rep_mime_type -i ^application/x-mplayer2$ acl x-type2 rep_mime_type -i application/x-mplayer2 acl x-type2 rep_mime_type -i ^application/x-oleobject$ acl x-type2 rep_mime_type -i application/x-oleobject acl x-type2 rep_mime_type -i application/x-pncmd acl x-type2 rep_mime_type -i ^video/x-ms-asf$ acl RestrictHulu dstdom_regex -i hulu.com acl broken dstdomain cms.montgomerycollege.edu events.columbiamochamber.com members.columbiamochamber.com public.genexusserver.com acl RestrictVimeo dstdom_regex -i vimeo.com acl http_port port 80 #http_reply_access deny deny_rep_mime_flashvideo #http_reply_access deny deny_rep_mime_shockwave #streaming files #http_access deny fails #http_reply_access deny fails #http_access deny fails2 #http_reply_access deny fails2 #http_access deny x-type #http_reply_access deny x-type #http_access deny x-type2 #http_reply_access deny x-type2 follow_x_forwarded_for allow localhost acl_uses_indirect_client on log_uses_indirect_client on http_access allow manager localhost http_access deny manager http_access allow purge localhost http_access deny purge http_access allow SpecialFolks http_access deny CONNECT !SSL_ports http_access allow whsws http_access allow opensites http_access deny BuemerKEC !MBSsortnet http_access deny BrkRm RestrictUTube RestrictFacebook RestrictVimeo http_access allow RestrictUTube UTubeUsers http_access deny RestrictUTube http_access allow RestrictFacebook FacebookUsers http_access deny RestrictFacebook http_access deny RestrictHulu http_access allow NoAuthNec http_access allow BrkRm http_access allow FacebookUsers RestrictVimeo http_access deny RestrictVimeo http_access allow Comps http_access allow Dials http_access allow Printers http_access allow password http_access deny !Safe_ports http_access deny SSL_ports !CONNECT http_access allow http_port http_access deny all http_reply_access allow all icp_access allow all access_log /squid/var/logs/access.log squid visible_hostname proxy.site.com forwarded_for off coredump_dir /squid/cache/ #header_access Accept-Encoding deny broken #acl snmppublic snmp_community mysecretcommunity #snmp_port 3401 #snmp_access allow snmppublic all cache_mem 3 GB #acl snmppublic snmp_community mbssquid #snmp_port 3401 #snmp_access allow snmppublic all

  Read the article

• MacGyver Moments

  - by Geoff N. Hiten

  Denny Cherry tagged me to write about my best MacGyver Moment.  Usually I ignore blogosphere fluff and just use this space to write what I think is important.  However, #MVP10 just ended and I have a stronger sense of community.  Besides, where else would I mention my second best Macgyver moment was making a BIOS jumper out of a soda can.  Aluminum is conductive and I didn't have any real jumpers lying around. My best moment is probably my entire home computer network.  Every system but one is hand-built, usually cobbled together out of spare parts and 'adapted' from its original purpose. My Primary Domain Controller is a Dell 2300.   The Service Tag indicates it was shipped to the original owner in 1999.  Box has a PERC/1 RAID controller.  I acquired this from a previous employer for $50.  It runs Windows Server 2003 Enterprise Edition.  Does DNS, DHCP, and RADIUS services as a bonus.  RADIUS authentication is used for VPN and Wireless access.  It is nice to sign in once and be done with it. The Secondary Domain Controller is an old desktop.  Dual P-III 933 with some extra drives. My VPN box is a P-II 250 with 384MB of RAM and a 21 GB hard drive.  I did a P-to-V to my Hyper-V box a year or so ago and retired the hardware again.  Dynamic DNS lets me connect no matter how often Comcast shuffles my IP. The Hyper-V box is a desktop system with 8GB RAM and an AMD Athlon 5000+ processor.  Cost me less than $500 to put together nearly two years ago.  I reasoned that if Vista and Windows 2008 were the same code then Vista 64-bit certified meant the drivers for Vista would load into Windows 2008.  Turns out I was right. Later I added three 1TB drives but wasn't too happy with how that turned out.  I recovered two of the drives yesterday and am building an iSCSI storage unit. (Much thanks to Starwind.  Great product).  I am using an old AMD 1.1GhZ box with 1.5 GB RAM (cobbled together from three old PCs) as my storave server.  The Hyper-V box is slated for an OS rebuild to 2008 R2 once I get the storage system worked out.  maybe in a week or two. A couple of DLink Gigabit switches ties everything together. Add in the Vonage box, the three PCs, the Wireless-N Access Point, the two notebooks and the XBox and you have gone from MacGyver to darn near Rube Goldberg. The only thing I really spend money on is power supplies and fans.  I buy top-of-the-line for both. I even pull and crimp my own cables. Oh, and if my kids hose up a PC, I have all of their data on a server elsewhere.  Every PC and laptop is pretty much interchangable for email and basic workstation tasks.  That helps a lot too. Of course I will tag SQLVariant.

  Read the article

• Wireless is detected, but not connecting. Ethernet works. How to correct the wireless address?

  - by Lucas

  I am running Ubuntu 14.04 with cable internet, and my wireless is detected and connected, but I cannot connect to the internet. I know the problem is with my machine because other machines are connecting to the same router just fine. I can connect via ethernet just fine as well. Here are some notable tests: ping 192.168.0.105 works with 0% packet loss, but ping 192.168.0.1 has 100% packet loss. When I plug in my ethernet, ping 192.168.0.1 works with 0% packet loss. My wireless name is tg, and the router ip is 192.168.0.1 (where I can enter username and password). I suspect that I need to change my wireless address from 192.168.0.105 to 192.168.0.1. Any suggestions on how to proceed? extra info: [lucas@lucas-ThinkPad-W520]/home/lucas$ iwconfig eth0 no wireless extensions. lo no wireless extensions. wlan0 IEEE 802.11abgn ESSID:"tg" Mode:Managed Frequency:2.462 GHz Access Point: 00:02:6F:83:F8:F4 Bit Rate=1 Mb/s Tx-Power=15 dBm Retry long limit:7 RTS thr:off Fragment thr:off Power Management:off Link Quality=62/70 Signal level=-48 dBm Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0 Tx excessive retries:52 Invalid misc:166 Missed beacon:0 [lucas@lucas-ThinkPad-W520]/home/lucas$ ifconfig eth0 Link encap:Ethernet HWaddr f0:de:f1:b2:53:53 inet addr:192.168.0.100 Bcast:192.168.0.255 Mask:255.255.255.0 inet6 addr: fe80::f2de:f1ff:feb2:5353/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:980003 errors:0 dropped:0 overruns:0 frame:0 TX packets:498384 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:1320506168 (1.3 GB) TX bytes:59780591 (59.7 MB) Interrupt:20 Memory:f3a00000-f3a20000 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:65536 Metric:1 RX packets:21927 errors:0 dropped:0 overruns:0 frame:0 TX packets:21927 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:1781719 (1.7 MB) TX bytes:1781719 (1.7 MB) wlan0 Link encap:Ethernet HWaddr 24:77:03:29:8f:dc inet addr:192.168.0.105 Bcast:192.168.0.255 Mask:255.255.255.0 inet6 addr: fe80::2677:3ff:fe29:8fdc/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:11828 errors:0 dropped:0 overruns:0 frame:0 TX packets:15444 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:4855662 (4.8 MB) TX bytes:2250585 (2.2 MB) [lucas@lucas-ThinkPad-W520]/home/lucas$ lspci -nn | grep 0280 03:00.0 Network controller [0280]: Intel Corporation Centrino Ultimate-N 6300 [8086:4238] (rev 3e) [lucas@lucas-ThinkPad-W520]/home/lucas$ rfkill list 0: hci0: Bluetooth Soft blocked: no Hard blocked: no 1: tpacpi_bluetooth_sw: Bluetooth Soft blocked: no Hard blocked: no 2: phy0: Wireless LAN Soft blocked: no Hard blocked: no with ethernet unplugged: [lucas@lucas-ThinkPad-W520]/home/lucas$ route -n | grep UG 0.0.0.0 192.168.0.1 0.0.0.0 UG 0 0 0 wlan0 with ethernet plugged in: [lucas@lucas-ThinkPad-W520]/home/lucas$ route -n | grep UG 0.0.0.0 192.168.0.1 0.0.0.0 UG 0 0 0 eth0 [lucas@lucas-ThinkPad-W520]/home/lucas$ nm-tool NetworkManager Tool State: connected (global) - Device: wlan0 [tg] ---------------------------------------------------------- Type: 802.11 WiFi Driver: iwlwifi State: connected Default: no HW Address: 24:77:03:29:8F:DC Capabilities: Speed: 52 Mb/s Wireless Properties WEP Encryption: yes WPA Encryption: yes WPA2 Encryption: yes Wireless Access Points (* = current AP) tatum: Infra, 40:8B:07:D8:A5:04, Freq 2437 MHz, Rate 54 Mb/s, Strength 42 W PA WPA2 ums: Infra, 00:20:A6:72:52:BF, Freq 2437 MHz, Rate 54 Mb/s, Strength 59 Alpha 40: Infra, 28:CF:E9:86:59:5D, Freq 5260 MHz, Rate 54 Mb/s, Strength 30 W PA WPA2 thepromiselan: Infra, 58:6D:8F:51:E5:54, Freq 2452 MHz, Rate 54 Mb/s, Strength 34 $ PA WPA2 xfinitywifi: Infra, 06:1D:D5:84:27:A0, Freq 2437 MHz, Rate 54 Mb/s, Strength 52 *tg: Infra, 00:02:6F:83:F8:F4, Freq 2462 MHz, Rate 54 Mb/s, Strength 73 W PA2 ums: Infra, 00:20:A6:A1:9F:25, Freq 2452 MHz, Rate 54 Mb/s, Strength 44 BRIAN-PC_Network:Infra, 20:AA:4B:DD:93:D6, Freq 2462 MHz, Rate 54 Mb/s, Strength 35 W PA2 HOME-C0F8: Infra, 44:32:C8:D2:C0:F8, Freq 2412 MHz, Rate 54 Mb/s, Strength 40 W PA WPA2 abcsexy: Infra, 28:28:5D:27:5D:85, Freq 2412 MHz, Rate 54 Mb/s, Strength 27 W PA WPA2 IPv4 Settings: Address: 192.168.0.105 Prefix: 24 (255.255.255.0) Gateway: 192.168.0.1 DNS: 192.168.0.1 - Device: eth0 [Wired connection 1] ------------------------------------------- Type: Wired Driver: e1000e State: connected Default: yes HW Address: F0:DE:F1:B2:53:53 Capabilities: Carrier Detect: yes Speed: 100 Mb/s Wired Properties Carrier: on IPv4 Settings: Address: 192.168.0.100 Prefix: 24 (255.255.255.0) Gateway: 192.168.0.1 DNS: 192.168.0.1

  Read the article

• Easy Made Easier - Networking

  - by dragonfly

      In my last post, I highlighted the feature of the Appliance Manager Configurator to auto-fill some fields based on previous field values, including host names based on System Name and sequential IP addresses from the first IP address entered. This can make configuration a little faster and a little less subject to data entry errors, particularly if you are doing the configuration on the Oracle Database Appliance itself.     The Oracle Database Appliance Appliance Manager Configurator is available for download here. But why would you download it, if it comes pre-installed on the Oracle Database Appliance? A common reason for customers interested in this new Engineered System is to get a good idea of how easy it is to configure. Beyond that, you can save the resulting configuration as a file, and use it on an Oracle Database Appliance. This allows you to verify the data entered in advance, and in the comfort of your office. In addition, the topic of this post is another strong reason to download and use the Appliance Manager Configurator prior to deploying your Oracle Database Appliance.     The most common source of hiccups in deploying an Oracle Database Appliance, based on my experiences with a variety of customers, involves the network configuration. It is during Step 11, when network validation occurs, that these come to light, which is almost half way through the 24 total steps, and can be frustrating, whether it was a typo, DNS mis-configuration or IP address already in use. This is why I recommend as a best practice taking advantage of the Appliance Manager Configurator prior to deploying an Oracle Database Appliance.     Why? Not only do you get the benefit of being able to double check your entries before you even start on the Oracle Database Appliance, you can also take advantage of the Network Validation step. This is the final step before you review all the data and can save it to a text file. It can be skipped, if you aren't ready or are not connected to the network that the Oracle Database Appliance will be on. My recommendation, though, is to run the Appliance Manager Configurator on your laptop, enter the data or re-load a previously saved file of the data, and then connect to the network that the Oracle Database Appliance will be on. Now run the Network Validation. It will check to make sure that the host names you entered are in DNS and do resolve to the IP addresses you specifiied. It will also ping the IP Addresses you specified, so that you can verify that no other machine is already using them (yes, that has happened at customer sites).     After you have completed the validation, as seen in the screen shot below, you can review the results and move on to saving your settings to a file for use on your Oracle Database Appliance, or if there are errors, you can use the Back button to return to the appropriate screen and correct the data. Once you are satisfied with the Network Validation, just check the Skip/Ignore Network Validation checkbox at the top of the screen, then click Next. Is the Network Validation in the Appliance Manager Configurator required? No, but it can save you time later. I should also note that the Network Validation screen is not part of the Appliance Manager Configurator that currently ships on the Oracle Database Appliance, so this is the easiest way to verify your network configuration.     I hope you are finding this series of posts useful. My next post will cover some aspects of the windowing environment that gets run by the 'startx' command on the Oracle Database Appliance, since this is needed to run the Appliance Manager Configurator via a direct connected monitor, keyboard and mouse, or via the ILOM. If it's been a while since you've used an OpenWindows environment, you'll want to check it out.

  Read the article

• Hyper-V for Developers Part 1 Internal Networks

  Over the last year, weve been working with Microsoft to build training and demo content for the next version of Office Communications Server code-named Microsoft Communications Server 14.  This involved building multi-server demo environments in Hyper-V, getting them running on demo servers which we took to TechEd, PDC, and other training events, and sometimes connecting the demo servers to the show networks at those events.  ITPro stuff that should scare the hell out of a developer! It can get ugly when I occasionally have to venture into ITPro land.  Lets leave it at that. Having gone through this process about 10 to 15 times in the last year, I finally have it down.  This blog series is my attempt to put all that knowledge in one place if anything, so I can find it somewhere when I need it again.  Ill start with the most simple scenario and then build on top of it in future blog posts. If youre an ITPro, please resist the urge to laugh at how trivial this is. Internal Hyper-V Networks Lets start simple.  An internal network is one that intended only for the virtual machines that are going to be on that network it enables them to communicate with each other. Create an Internal Network On your host machine, fire up the Hyper-V Manager and click the Virtual Network Manager in the Actions panel. Select Internal and leave all the other default values. Give the virtual network a name, and leave all the other default values. After the virtual network is created, open the Network and Sharing Center and click Change Adapter Settings to see the list of network connections. The only thing I recommend that you do is to give this connection a friendly label, e.g. Hyper-V Internal.  When you have multiple networks and virtual networks on the host machines, this helps group the networks so you can easily differentiate them from each other.  Otherwise, dont touch it, only bad things can happen. Connect the Virtual Machines to the Internal Network Im assuming that you have more than 1 virtual machine already configured in Hyper-V, for example a Domain Controller, and Exchange Server, and a SharePoint Server. What you need to do is basically plug in the network to the virtual machine.  In order to do this, the machine needs to have a virtual network adapter.  If the VM doesnt have a network adapter, open the VMs Settings and click Add Hardware in the left pane.  Choose the virtual network to which to bind the adapter to. If you already have a virtual network adapter on the VM, simply connect it to the virtual network. Assign IP Addresses to the Virtual Machines on the Internal Network Open the Network and Sharing Center on your VM, there should only be 1 network at this time.  Open the Properties of the connection, select Internet Protocol Version 4 (TCP/IPv4) and hit Properties. In this environment, Im assigning IP addresses as 192.168.0.xxx.  This particular VM has an IP address of 192.168.0.40 with a subnet mask of 255.255.255.0, and a DNS Server of 192.168.0.18.  DNS is running on the Domain Controller VM which has an IP address of 192.168.0.18. Repeat this process on every VM in your environment, obviously assigning a unique IP address to each.  In an environment with a domain controller, you should now be able to ping the machines from each other. What Next? After completing this process, heres what you still cannot do: Access the internet from any of the VMs Remote desktop to a VM from the host Remote desktop to a VM over the network In the next post, well take a look configuring an External network adapter on the virtual machines.  Well then build on top of that so that you can RDP into the VMs from the host machine and over the network.Did you know that DotNetSlackers also publishes .net articles written by top known .net Authors? We already have over 80 articles in several categories including Silverlight. Take a look: here.

  Read the article

• Options for different domain and hosting

  - by Carl

  The situation I have a hosting service (one.com) on which I have installed a wordpress.org site in a subdirectory 'wordpress': myhost.com/wordpress/ (myhost.com is actually my own domain, but it already has contents and I don't want wordpress/ to appear in the root of that domain.) I want to use a second domain for this site. Thinking I would be able to forward to the wordpress site without problems, I registered the domain at GoDaddy.com: mydomain.com What I want So when my visitors type in mydomaind.com, I want them to see the contents on myhost.com/wordpress/, and the same for all subpages (mydomain.com/a/subpage fetches from myhost.com/wordpress/a/subpage). Just a redirect isn't enough, I want my visitors to see only mydomain.com as their domain. Some notes If I set up forward with URL masking at GoDaddy, they just give a full frame, pointing to myhost.com/wordpress/. This isn't good enough for me, since mydomain.com will always show up in the adress bar, also for subpages (I want mydomain/a/subpage to show in the adress bar for a subpage). I believe this could in principle be done with a .htaccess file with URL rewriting, but I have no hosting with GoDaddy so I can't upload such a file there. Hosting with GoDaddy is very expensive (of course) so I don't want to do that. I don't think I can use DNS settings; the host of mydomain.com says they don't allow anyone else to point to their name servers. If possible, I wouldn't want to re-install the wordpress site, it would take quite some time. I'd prefer to keep it at myhost.com/wordpress/ (if possible) Anything involving transferring the domain is supposed to take 5-7 working days. I would need my site up-and-running earlier than that, so I'd like to avoid it if possible. Am I locked in? As it seems, I am rather locked-in with GoDaddy. I can't use the domain with .htaccess since I can't upload such a file (and won't pay for hosting by GoDaddy). I can't use any of their forward options since none of them do what I want (one just forwards, the one that masks the URL does it with frames). Would you agree? Possible solutions Transfer the domain to any hosting service with reasonable hosting pricing, as opposed to GoDaddy (I'd probably use one.com, the same host as for myhost.com, in that case), and there either re-install wordpress on the new account, or use .htaccess with URL rewrite on the new account to fetch the contents from myhost.com/wordpress/. Can this be set-up to work with sub-pages as well? And visitors won't ever see "myhost.com/wordpress", just "mydomain.com"? E.i., mydomain.com/a/subpage/ wold fetch from myhost.com/wordpress/a/subpage/? This might be a long shot but: Find some free (preferrably) hosting allowing to point to their nameservers Make DNS settings at GoDaddy so that my domain appears at the site above at that site, put a .htaccess file with URL rewriting to forward to myhost.com/wordpress/ Could this be possible? What services could I use in that case? As I see it, this would be the only way not to have to transfer a domain (taking 5-7 working days) and not having to re-install the wordpress site. Sorry for the long question. All info and ideas are welcome.

  Read the article

• android client not working [migrated]

  - by Syeda Zunairah

  i have a java client and c# server the server code is static Socket listeningSocket; static Socket socket; static Thread thrReadRequest; static int iPort = 4444; static int iConnectionQueue = 100; static void Main(string[] args) { Console.WriteLine(IPAddress.Parse(getLocalIPAddress()).ToString()); try { listeningSocket = new Socket(AddressFamily.InterNetwork, SocketType.Stream, ProtocolType.Tcp); //listeningSocket.Bind(new IPEndPoint(0, iPort)); listeningSocket.Bind(new IPEndPoint(IPAddress.Parse(getLocalIPAddress()), iPort)); listeningSocket.Listen(iConnectionQueue); thrReadRequest = new Thread(new ThreadStart(getRequest)); thrReadRequest.Start(); } catch (Exception e) { Console.WriteLine("Winsock error: " + e.ToString()); //throw; } } static private void getRequest() { int i = 0; while (true) { i++; Console.WriteLine("Outside Try i = {0}", i.ToString()); try { socket = listeningSocket.Accept(); // Receiving //byte[] rcvLenBytes = new byte[4]; //socket.Receive(rcvLenBytes); //int rcvLen = System.BitConverter.ToInt32(rcvLenBytes, 0); //byte[] rcvBytes = new byte[rcvLen]; //socket.Receive(rcvBytes); //String formattedBuffer = System.Text.Encoding.ASCII.GetString(rcvBytes); byte[] buffer = new byte[socket.SendBufferSize]; int iBufferLength = socket.Receive(buffer, 0, buffer.Length, 0); Console.WriteLine("Received {0}", iBufferLength); Array.Resize(ref buffer, iBufferLength); string formattedBuffer = Encoding.ASCII.GetString(buffer); Console.WriteLine("Data received by Client: {0}", formattedBuffer); if (formattedBuffer == "quit") { socket.Close(); listeningSocket.Close(); Environment.Exit(0); } Console.WriteLine("Inside Try i = {0}", i.ToString()); Thread.Sleep(500); } catch (Exception e) { //socket.Close(); Console.WriteLine("Receiving error: " + e.ToString()); Console.ReadKey(); //throw; } finally { socket.Close(); //listeningsocket.close(); } } } static private string getLocalIPAddress() { IPHostEntry host; string localIP = ""; host = Dns.GetHostEntry(Dns.GetHostName()); foreach (IPAddress ip in host.AddressList) { if (ip.AddressFamily == AddressFamily.InterNetwork) { localIP = ip.ToString(); break; } } return localIP; } } and the jave android code is private TCPClient mTcpClient; @Override protected void onCreate(Bundle savedInstanceState) { super.onCreate(savedInstanceState); setContentView(R.layout.activity_main); final EditText editText = (EditText) findViewById(R.id.edit_message); Button send = (Button)findViewById(R.id.sendbutton); // connect to the server new connectTask().execute(""); send.setOnClickListener(new View.OnClickListener() { @Override public void onClick(View view) { String message = editText.getText().toString(); //sends the message to the server if (mTcpClient != null) { mTcpClient.sendMessage(message); } editText.setText(""); } }); } @Override public boolean onCreateOptionsMenu(Menu menu) { getMenuInflater().inflate(R.menu.main, menu); return true; } public class connectTask extends AsyncTask<String,String,TCPClient> { @Override protected TCPClient doInBackground(String... message) { mTcpClient = new TCPClient(new TCPClient.OnMessageReceived() { @Override public void messageReceived(String message) { publishProgress(message); } }); mTcpClient.run(); return null; } @Override protected void onProgressUpdate(String... values) { super.onProgressUpdate(values); } } } when i run the server it gives output of try i=1. can any one tell me what to do next

  Read the article

• Server 2003 SP2 BSOD caused by fltmgr.sys

  - by MasterMax1313

  I'm running into a problem where a Server 2003 SP2 box has started crashing roughly once an hour, BSODing out with the message that fltmgr.sys is probably the cause. I ran dumpchk.exe on the memory.dmp file, indicating the same thing. Any thoughts on typical root causes? The following is the error code I'm seeing: Error code 0000007e, parameter1 c0000005, parameter2 f723e087, parameter3 f78cea8c, parameter4 f78ce788. After running dumpchk on the memory.dmp file, I get the following note: Probably caused by : fltmgr.sys ( fltmgr!FltGetIrpName+63f ) The full log is here: Microsoft (R) Windows Debugger Version 6.12.0002.633 X86 Copyright (c) Microsoft Corporation. All rights reserved. Loading Dump File [c:\windows\memory.dmp] Kernel Complete Dump File: Full address space is available Symbol search path is: *** Invalid *** **************************************************************************** * Symbol loading may be unreliable without a symbol search path. * * Use .symfix to have the debugger choose a symbol path. * * After setting your symbol path, use .reload to refresh symbol locations. * **************************************************************************** Executable search path is: ********************************************************************* * Symbols can not be loaded because symbol path is not initialized. * * * * The Symbol Path can be set by: * * using the _NT_SYMBOL_PATH environment variable. * * using the -y <symbol_path> argument when starting the debugger. * * using .sympath and .sympath+ * ********************************************************************* *** ERROR: Symbol file could not be found. Defaulted to export symbols for ntkrnlpa.exe - Windows Server 2003 Kernel Version 3790 (Service Pack 2) UP Free x86 compatible Product: Server, suite: TerminalServer SingleUserTS Built by: 3790.srv03_sp2_gdr.101019-0340 Machine Name: Kernel base = 0x80800000 PsLoadedModuleList = 0x8089ffa8 Debug session time: Wed Oct 5 08:48:04.803 2011 (UTC - 4:00) System Uptime: 0 days 14:25:12.085 ********************************************************************* * Symbols can not be loaded because symbol path is not initialized. * * * * The Symbol Path can be set by: * * using the _NT_SYMBOL_PATH environment variable. * * using the -y <symbol_path> argument when starting the debugger. * * using .sympath and .sympath+ * ********************************************************************* *** ERROR: Symbol file could not be found. Defaulted to export symbols for ntkrnlpa.exe - Loading Kernel Symbols ............................................................... ................................................. Loading User Symbols Loading unloaded module list ... ******************************************************************************* * * * Bugcheck Analysis * * * ******************************************************************************* Use !analyze -v to get detailed debugging information. BugCheck 7E, {c0000005, f723e087, f78dea8c, f78de788} ***** Kernel symbols are WRONG. Please fix symbols to do analysis. *** ERROR: Symbol file could not be found. Defaulted to export symbols for fltmgr.sys - --omitted-- Probably caused by : fltmgr.sys ( fltmgr!FltGetIrpName+63f ) Followup: MachineOwner --------- ----- 32 bit Kernel Full Dump Analysis DUMP_HEADER32: MajorVersion 0000000f MinorVersion 00000ece KdSecondaryVersion 00000000 DirectoryTableBase 004e7000 PfnDataBase 81600000 PsLoadedModuleList 8089ffa8 PsActiveProcessHead 808a61c8 MachineImageType 0000014c NumberProcessors 00000001 BugCheckCode 0000007e BugCheckParameter1 c0000005 BugCheckParameter2 f723e087 BugCheckParameter3 f78dea8c BugCheckParameter4 f78de788 PaeEnabled 00000001 KdDebuggerDataBlock 8088e3e0 SecondaryDataState 00000000 ProductType 00000003 SuiteMask 00000110 Physical Memory Description: Number of runs: 3 (limited to 3) FileOffset Start Address Length 00001000 0000000000001000 0009e000 0009f000 0000000000100000 bfdf0000 bfe8f000 00000000bff00000 00100000 Last Page: 00000000bff8e000 00000000bffff000 KiProcessorBlock at 8089f300 1 KiProcessorBlock entries: ffdff120 Windows Server 2003 Kernel Version 3790 (Service Pack 2) UP Free x86 compatible Product: Server, suite: TerminalServer SingleUserTS Built by: 3790.srv03_sp2_gdr.101019-0340 Machine Name:*** ERROR: Module load completed but symbols could not be loaded for srv.sys Kernel base = 0x80800000 PsLoadedModuleList = 0x8089ffa8 Debug session time: Wed Oct 5 08:48:04.803 2011 (UTC - 4:00) System Uptime: 0 days 14:25:12.085 start end module name 80800000 80a50000 nt Tue Oct 19 10:00:49 2010 (4CBDA491) 80a50000 80a6f000 hal Sat Feb 17 00:48:25 2007 (45D69729) b83d4000 b83fe000 Fastfat Sat Feb 17 01:27:55 2007 (45D6A06B) b8476000 b84a1000 RDPWD Sat Feb 17 00:44:38 2007 (45D69646) b8549000 b8554000 TDTCP Sat Feb 17 00:44:32 2007 (45D69640) b8fe1000 b9045000 srv Thu Feb 17 11:58:17 2011 (4D5D53A9) b956d000 b95be000 HTTP Fri Nov 06 07:51:22 2009 (4AF41BCA) b9816000 b982d780 hgfs Tue Aug 12 20:36:54 2008 (48A22CA6) b9b16000 b9b20000 ndisuio Sat Feb 17 00:58:25 2007 (45D69981) b9cf6000 b9d1ac60 iwfsd Wed Sep 29 01:43:59 2004 (415A4B9F) b9e5b000 b9e62000 parvdm Tue Mar 25 03:03:49 2003 (3E7FFF55) b9e63000 b9e67860 lgtosync Fri Sep 12 04:38:13 2003 (3F6185F5) b9ed3000 b9ee8000 Cdfs Sat Feb 17 01:27:08 2007 (45D6A03C) b9f10000 b9f2e000 EraserUtilRebootDrv Thu Jul 07 21:45:11 2011 (4E166127) b9f2e000 b9f8c000 eeCtrl Thu Jul 07 21:45:11 2011 (4E166127) b9f8c000 b9f9d000 Fips Sat Feb 17 01:26:33 2007 (45D6A019) b9f9d000 ba013000 mrxsmb Fri Feb 18 10:22:23 2011 (4D5E8EAF) ba013000 ba043000 rdbss Wed Feb 24 10:54:03 2010 (4B854B9B) ba043000 ba0ad000 SPBBCDrv Mon Dec 14 23:39:00 2009 (4B2712E4) ba0ad000 ba0d7000 afd Thu Feb 10 08:42:18 2011 (4D53EB3A) ba0d7000 ba108000 netbt Sat Feb 17 01:28:57 2007 (45D6A0A9) ba108000 ba19c000 tcpip Sat Aug 15 05:53:38 2009 (4A8685A2) ba19c000 ba1b5000 ipsec Sat Feb 17 01:29:28 2007 (45D6A0C8) ba275000 ba288600 NAVENG Fri Jul 29 08:10:02 2011 (4E32A31A) ba289000 ba2ae000 SYMEVENT Thu Apr 15 21:31:23 2010 (4BC7BDEB) ba2ae000 ba42d300 NAVEX15 Fri Jul 29 08:07:28 2011 (4E32A280) ba42e000 ba479000 SRTSP Fri Mar 04 15:31:08 2011 (4D714C0C) ba485000 ba487b00 dump_vmscsi Wed Apr 11 13:55:32 2007 (461D2114) ba4e1000 ba540000 update Mon May 28 08:15:16 2007 (465AC7D4) ba568000 ba59f000 rdpdr Sat Feb 17 00:51:00 2007 (45D697C4) ba59f000 ba5b1000 raspptp Sat Feb 17 01:29:20 2007 (45D6A0C0) ba5b1000 ba5ca000 ndiswan Sat Feb 17 01:29:22 2007 (45D6A0C2) ba5da000 ba5e4000 dump_diskdump Sat Feb 17 01:07:44 2007 (45D69BB0) ba66a000 ba67e000 rasl2tp Sat Feb 17 01:29:02 2007 (45D6A0AE) ba67e000 ba69a000 VIDEOPRT Sat Feb 17 01:10:30 2007 (45D69C56) ba69a000 ba6c1000 ks Sat Feb 17 01:30:40 2007 (45D6A110) ba6c1000 ba6d5000 redbook Sat Feb 17 01:07:26 2007 (45D69B9E) ba6d5000 ba6ea000 cdrom Sat Feb 17 01:07:48 2007 (45D69BB4) ba6ea000 ba6ff000 serial Sat Feb 17 01:06:46 2007 (45D69B76) ba6ff000 ba717000 parport Sat Feb 17 01:06:42 2007 (45D69B72) ba717000 ba72a000 i8042prt Sat Feb 17 01:30:40 2007 (45D6A110) baff0000 baff3700 CmBatt Sat Feb 17 00:58:51 2007 (45D6999B) bf800000 bf9d3000 win32k Thu Mar 03 08:55:02 2011 (4D6F9DB6) bf9d3000 bf9ea000 dxg Sat Feb 17 01:14:39 2007 (45D69D4F) bf9ea000 bf9fec80 vmx_fb Sat Aug 16 07:23:10 2008 (48A6B89E) bf9ff000 bfa4a000 ATMFD Tue Feb 15 08:19:22 2011 (4D5A7D5A) bff60000 bff7e000 RDPDD Sat Feb 17 09:01:19 2007 (45D70AAF) f7214000 f723a000 KSecDD Mon Jun 15 13:45:11 2009 (4A3688A7) f723a000 f725f000 fltmgr Sat Feb 17 00:51:08 2007 (45D697CC) f725f000 f7272000 CLASSPNP Sat Feb 17 01:28:16 2007 (45D6A080) f7272000 f7283000 symmpi Mon Dec 13 16:03:14 2004 (41BE0392) f7283000 f72a2000 SCSIPORT Sat Feb 17 01:28:41 2007 (45D6A099) f72a2000 f72bf000 atapi Sat Feb 17 01:07:34 2007 (45D69BA6) f72bf000 f72e9000 volsnap Sat Feb 17 01:08:23 2007 (45D69BD7) f72e9000 f7315000 dmio Sat Feb 17 01:10:44 2007 (45D69C64) f7315000 f733c000 ftdisk Sat Feb 17 01:08:05 2007 (45D69BC5) f733c000 f7352000 pci Sat Feb 17 00:59:03 2007 (45D699A7) f7352000 f7386000 ACPI Sat Feb 17 00:58:47 2007 (45D69997) f7487000 f7490000 WMILIB Tue Mar 25 03:13:00 2003 (3E80017C) f7497000 f74a6000 isapnp Sat Feb 17 00:58:57 2007 (45D699A1) f74a7000 f74b4000 PCIIDEX Sat Feb 17 01:07:32 2007 (45D69BA4) f74b7000 f74c7000 MountMgr Sat Feb 17 01:05:35 2007 (45D69B2F) f74c7000 f74d2000 PartMgr Sat Feb 17 01:29:25 2007 (45D6A0C5) f74d7000 f74e7000 disk Sat Feb 17 01:07:51 2007 (45D69BB7) f74e7000 f74f3000 Dfs Sat Feb 17 00:51:17 2007 (45D697D5) f74f7000 f7501000 crcdisk Sat Feb 17 01:09:50 2007 (45D69C2E) f7507000 f7517000 agp440 Sat Feb 17 00:58:53 2007 (45D6999D) f7517000 f7522000 TDI Sat Feb 17 01:01:19 2007 (45D69A2F) f7527000 f7532000 ptilink Sat Feb 17 01:06:38 2007 (45D69B6E) f7537000 f7540000 raspti Sat Feb 17 00:59:23 2007 (45D699BB) f7547000 f7556000 termdd Sat Feb 17 00:44:32 2007 (45D69640) f7557000 f7561000 Dxapi Tue Mar 25 03:06:01 2003 (3E7FFFD9) f7577000 f7580000 mssmbios Sat Feb 17 00:59:12 2007 (45D699B0) f7587000 f7595000 NDProxy Wed Nov 03 09:25:59 2010 (4CD162E7) f75a7000 f75b1000 flpydisk Tue Mar 25 03:04:32 2003 (3E7FFF80) f75b7000 f75c0080 SRTSPX Fri Mar 04 15:31:24 2011 (4D714C1C) f75d7000 f75e3000 vga Sat Feb 17 01:10:30 2007 (45D69C56) f75e7000 f75f2000 Msfs Sat Feb 17 00:50:33 2007 (45D697A9) f75f7000 f7604000 Npfs Sat Feb 17 00:50:36 2007 (45D697AC) f7607000 f7615000 msgpc Sat Feb 17 00:58:37 2007 (45D6998D) f7617000 f7624000 netbios Sat Feb 17 00:58:29 2007 (45D69985) f7627000 f7634000 wanarp Sat Feb 17 00:59:17 2007 (45D699B5) f7637000 f7646000 intelppm Sat Feb 17 00:48:30 2007 (45D6972E) f7647000 f7652000 kbdclass Sat Feb 17 01:05:39 2007 (45D69B33) f7657000 f7661000 mouclass Tue Mar 25 03:03:09 2003 (3E7FFF2D) f7667000 f7671000 serenum Sat Feb 17 01:06:44 2007 (45D69B74) f7677000 f7682000 fdc Sat Feb 17 01:07:16 2007 (45D69B94) f7687000 f7694b00 vmx_svga Sat Aug 16 07:22:07 2008 (48A6B85F) f7697000 f76a0000 watchdog Sat Feb 17 01:11:45 2007 (45D69CA1) f76a7000 f76b0000 ndistapi Sat Feb 17 00:59:19 2007 (45D699B7) f76b7000 f76c6000 raspppoe Sat Feb 17 00:59:23 2007 (45D699BB) f76c8000 f7707000 NDIS Sat Feb 17 01:28:49 2007 (45D6A0A1) f7707000 f770f000 kdcom Tue Mar 25 03:08:00 2003 (3E800050) f770f000 f7717000 BOOTVID Tue Mar 25 03:07:58 2003 (3E80004E) f7717000 f771e000 intelide Sat Feb 17 01:07:32 2007 (45D69BA4) f771f000 f7726000 dmload Tue Mar 25 03:08:08 2003 (3E800058) f777f000 f7786000 dxgthk Tue Mar 25 03:05:52 2003 (3E7FFFD0) f7787000 f778e000 vmmemctl Tue Aug 12 20:37:25 2008 (48A22CC5) f77cf000 f77d6280 vmxnet Mon Sep 08 21:17:10 2008 (48C5CE96) f77d7000 f77df000 audstub Tue Mar 25 03:09:12 2003 (3E800098) f77ef000 f77f7000 Fs_Rec Tue Mar 25 03:08:36 2003 (3E800074) f77f7000 f77fe000 Null Tue Mar 25 03:03:05 2003 (3E7FFF29) f77ff000 f7806000 Beep Tue Mar 25 03:03:04 2003 (3E7FFF28) f7807000 f780f000 mnmdd Tue Mar 25 03:07:53 2003 (3E800049) f780f000 f7817000 RDPCDD Tue Mar 25 03:03:05 2003 (3E7FFF29) f7817000 f781f000 rasacd Tue Mar 25 03:11:50 2003 (3E800136) f7878000 f7897000 Mup Tue Apr 12 15:05:46 2011 (4DA4A28A) f7897000 f7899980 compbatt Sat Feb 17 00:58:51 2007 (45D6999B) f789b000 f789e900 BATTC Sat Feb 17 00:58:46 2007 (45D69996) f789f000 f78a1b00 vmscsi Wed Apr 11 13:55:32 2007 (461D2114) f79af000 f79b0280 vmmouse Mon Aug 11 07:16:51 2008 (48A01FA3) f79b1000 f79b2280 swenum Sat Feb 17 01:05:56 2007 (45D69B44) f7b4a000 f7bdf000 Ntfs Sat Feb 17 01:27:23 2007 (45D6A04B) Unloaded modules: ba65a000 ba668000 imapi.sys Timestamp: unavailable (00000000) Checksum: 00000000 ImageSize: 0000E000 ba1c4000 ba1d5000 vpc-8042.sys Timestamp: unavailable (00000000) Checksum: 00000000 ImageSize: 00011000 f77df000 f77e7000 Sfloppy.SYS Timestamp: unavailable (00000000) Checksum: 00000000 ImageSize: 00008000 ******************************************************************************* * * * Bugcheck Analysis * * * ******************************************************************************* Use !analyze -v to get detailed debugging information. BugCheck 7E, {c0000005, f723e087, f78dea8c, f78de788} ***** Kernel symbols are WRONG. Please fix symbols to do analysis. --omitted-- Probably caused by : fltmgr.sys ( fltmgr!FltGetIrpName+63f ) Followup: MachineOwner --------- Finished dump check

  Read the article

• 550 5.7.1 our Bulk Email Senders Guidelines

  - by darkandcold

  Hello, I moved to a new server with integrated merak mail. since I forgot merak(used before), i missed to configure security options. So before I realize the issue, my smtp server was used by spammers for 2 days, hundreds times I configured security settings as what it should be (at least i hope) then i realize, i can't send e-mail to gmail or hotmail. gmail says "550 5.7.1 see our Bulk Email Senders Guidelines" yes, I saw its guidelines. first, I creat SPF records via msn senderID wizard. it completed very well. then as gmail says, I created DKIM dns records. (in Merak mail, there is option to create DKIM, i created it and save it to DNS as TXT record) it's been 2 days after doing the fixes above. but still i can't send mail gmail or hotmail. (P.S, some of my domain in merak is forwarded to my gmail account i mean when a mail arrives to [email protected] it will forward to my gmail. and the surprise it, merak mail can forward them very vell :S but can't still send mail from outlook etc.)

  Read the article

• Ruby/Rails display general screen when modifications being performed on server

  - by john chan

  I have a ruby on rails app running a server and sometimes it needs to be taken down for updates/etc. As of now, one way I see to have a general display screen during update periods (when the app is down) is to substitute the files within /srv/www/ directory to just have it display a general screen everywhere that the user could possibly navigate to. I also thought of having a central controller file that connects all others (essentially a main) but this seems counter intuitive for rails. There are many external links to these different components of the site that the user could navigate to from outside and I need to make sure that they always receive this general update screen when the app is taken down for a little. I was wondering if anyone had any other ideas.... maybe a library or something like that, I can't seem to find anything online. any suggestions would be appreciated. Thanks

  Read the article

• WCF http & hhtps endpoint one contract

  - by Andrew Kalashnikov

  Hello colleagues. I've created wcf service and want use http and https version. Service is hosted by IIS 6.0. At my config I have: <bindings> <basicHttpBinding> <binding name="BindingConfiguration1" maxBufferPoolSize="2147483647" maxReceivedMessageSize="2147483647"> <readerQuotas maxDepth="2147483647" maxStringContentLength="2147483647" maxArrayLength="2147483647" maxBytesPerRead="2147483647" maxNameTableCharCount="2147483647"/> <security mode="TransportWithMessageCredential"> <transport clientCredentialType="None"/> <message clientCredentialType="UserName" /> </security> </binding> </basicHttpBinding> </bindings> <services> <service name="RegistratorService.Registrator" behaviorConfiguration="RegistratorService.Service1Behavior"> <endpoint binding="basicHttpBinding" contract="RegistratorService.IRegistrator" bindingConfiguration="BindingConfiguration1"> <identity> <dns value="localhost" /> </identity> </endpoint> <endpoint binding="basicHttpBinding" contract="RegistratorService.IRegistrator"> <identity> <dns value="localhost" /> </identity> </endpoint> <endpoint address="mex" binding="mexHttpsBinding" contract="IMetadataExchange"/> <host> <baseAddresses> <add baseAddress="http://aurit-server2" /> </baseAddresses> </host> </service> </services> But even at browser I've got exception "The provided URI scheme 'http' is invalid; expected 'https'" What's wrong? Thanks.

  Read the article

• Changing customErrors in web.config semi-dynamically

  - by Tom Ritter

  The basic idea is we have a test enviroment which mimics Production so customErrors="RemoteOnly". We just built a test harness that runs against the Test enviroment and detects breaks. We would like it to be able to pull back the detailed error. But we don't want to turn customErrors="On" because then it doesn't mimic Production. I've looked around and thought a lot, and everything I've come up with isn't possible. Am I wrong about any of these points? We can't turn customErrors on at runtime because when you call configuration.Save() - it writes the web.config to disk and now it's Off for every request. We can't symlink the files into a new top level directory with it's own web.config because we're on windows and subversion on windows doesn't do symlinks. We can't use URL-Mapping to make an empty folder dir2 with its own web.config and make the files in dir1 appear to be in dir2 - the web.config doesn't apply We can't copy all the aspx files into dir2 with it's own web.config because none of the links would be consistent and it's a horrible hacky solution. We can't change customErrors in web.config based on hostname (e.g. add another dns entry to the test server) because it's not possible/supported We can't do any virtual directory shenanigans to make it work. If I'm not, is there a way to accomplish what I'm trying to do? Turn on customErrors site-wide under certain circumstances (dns name or even a querystring value)?

  Read the article

• My HttpHandler doesn't want to create directory on a network

  - by Daok

  I use this simple line of code inside my HttpHandler: Directory.CreateDirectory(@"\\srv-001\dev\folderToCreate\"); I receive an UnauthoridezAccessException telling me that the access to the path is denied. From here, I create a little Dos application in C# doing the same thing and I was able to create the folder. So, I thought that it might be that IIS is running on a different user than myself. I went to IIS and changed the Application pool to a Custom user, myself. But, unfortunately, I got the same exception. I have try to create a Share folder on my computer and I can create directory. Also, when debugging I can see that System.Threading.Thread.CurrentPrincipal.Identity have its AuthenticationType to "", IsAuthenticated to false and name to "". So, with all those tests I can conclude that the HttpHandler that receive the file cannot create a directory because of some security access. How can I grand access to my HttpHandler to be able to create a directory (and files) to a network folder?

  Read the article

• Hadoop reduce task gets hung

  - by user806098

  I set up a hadoop cluster with 4 nodes, When running a map-reduce task, the map task finishes quickly, while the reduce task hangs at 27% percent. I checked the log, it's that the reduce task fails to fetch map output from map nodes. The job tracker log of master shows messages like this: 2011-06-27 19:55:14,748 INFO org.apache.hadoop.mapred.JobTracker: Adding task (REDUCE) 'attempt_201106271953_0001_r_000000_0' to tip task_201106271953_0001_r_000000, for tracker 'tracker_web30.bbn.com.cn:localhost/127.0.0.1:56476' And the name node log of master shows messages like this: 2011-06-27 14:00:52,898 INFO org.apache.hadoop.ipc.Server: IPC Server handler 4 on 54310, call register(DatanodeRegistration(202.106.199.39:50010, storageID=DS-1989397900-202.106.199.39-50010-1308723051262, infoPort=50075, ipcPort=50020)) from 192.168.225.19:16129: error: java.io.IOException: verifyNodeRegistration: unknown datanode 202.106.199.3 9:50010 However, neither the "web30.bbn.com.cn" or 202.106.199.39, 202.106.199.3 is the slave node. I think such ip/domains appear because hadoop fails to resolve a node(first in the Intranet DNS server), then it goes to a higher-level DNS server, later to the top, still fails, then the "junk" ip/domains are returned. But I checked my config, it goes like this: /etc/hosts: 127.0.0.1 localhost.localdomain localhost ::1 localhost6.localdomain6 localhost6 192.168.225.16 master 192.168.225.66 slave1 192.168.225.20 slave5 192.168.225.17 slave17 conf/core-site.xml: hadoop.tmp.dir /root/hadoop_tmp/hadoop_${user.name} fs.default.name hdfs://master:54310 io.sort.mb 1024 hdfs-site.xml: dfs.replication 3 masters: master slaves: master slave1 slave5 slave17 Also, all firewalls(iptables) are turned off, and ssh between each 2 nodes is ok. so I don't know where exact the error comes from. Please help. Thanks a lot.

  Read the article

< Previous Page | 119 120 121 122 123 124 125 126 127 128 129 130  | Next Page >