Search Results

Search found 6981 results on 280 pages for 'force flow'.

Page 123/280 | < Previous Page | 119 120 121 122 123 124 125 126 127 128 129 130  | Next Page >

• cisco 6500 crash enabling netflow

  - by bleomycin

  Hello everyone, i have a cisco 6503 running IOS 12.2(33)sxi5 and i'm trying to enable netflow. Following the instructions here http://www.manageengine.com/products/netflow/help/cisco-netflow/cisco-ios-netflow.html enabling for interface vlan 3, shortly after ip flow-export version 5 console outputs: CPU_MONITOR-6-NOT_HEARD: CPU monitor messages have not been heard for 30 seconds crashlog here: http://pastebin.com/Niv2H8xD it then writes a crash log and reloads the router. Has anyone else experienced anything like this before? Here is my running config prior to adding the options in the above link: http://pastebin.com/AgNb1ahG Thank you for any help!

  Read the article

• Forward the Wan IP to another Wan IP without change the Source address

  - by user195410

  I have tried this case by using the NAT function in iptables but fail example. PC A IP is 1.1.1.1 (Win7) My Server IP is 2.2.2.2 (CentOS 6.2) target Server B is 3.3.3.3 (Windows server 2003) Flow: PC A WanIP -- My Server A -- Server B (WanIP) ----My iptables rules--------- iptables -t nat -A PREROUTING -d 2.2.2.2 -p tcp --dport 80 -j DNAT --to-destination 3.3.3.3:80 iptables -t nat -A POSTROUTING -d 2.2.2.2 -j MASQUERADE finally, i can access server B website by enter 2.2.2.2:80 but when i checked the access log at Server B i found it's source address had been changed to src:2.2.2.2 dst:3.3.3.3 please help me to do how to get the real address is src:1.1.1.1 dst:3.3.3.3

  Read the article

• Parse HTTP requests through Wireshark?

  - by diogobaeder

  Hi, guys, Is there any way to parse HTTP request data in wireshark? For example, can I expose the request parameters upon an HTTP GET request (being sent by my machine), so that I don't need to read the (sometimes) truncated URL and find them by myself? I was using Tamper Data and Firebug, on my Firefox, to analyse these requests, but they're not as reliable as a stand-alone tool for monitoring my network interface, but wireshark keeps data too raw concerning HTTP flow. If you guys know any other stand-alone tool that does this (must be Linux-compatible), please tell me. Thanks!

  Read the article

• File association for editing on a mac

  - by Agos

  I'm quite experienced with how file association works for opening files on Mac OS X. I recall reading somewhere that OS X keeps not only the information about which apps can open a file, but also which apps can edit a specific file type. I'm having problems with those applications (Coda, Espresso, Forklift, Flow) that have an “edit with external editor” feature, since issuing this command on HTML files opens them with Dashcode. Dashcode of course is not the current association for opening these files (Safari is), so it's clearly looking for apps that can edit HTML. Since I'd like to use TextMate as my editor in these cases, how can I set this preference?

  Read the article

• Deploying play! 2.0 application on an apache server with a reverse proxy

  - by locrizak

  I'm trying to deploy my play! 2.0 application on an Ubuntu 11.10 server and I have been running into error after error and hope someone can help me here. I am try to deploy my Play! application using a reverse proxy on Apache 2. I have enabled the apache proxy modules and configured the proxy.conf file in mods_enabled. The vhost for my domain looks like this: <Directory /var/www/stage.domain.com AllowOverride None Order Deny,Allow Deny from all </Directory <VirtualHost *:80 DocumentRoot /var/www/stage.domain.com/web ServerName stage.domain.com ServerAdmin [email protected] # ProxyRequests Off # ProxyPreserveHost On <Proxy * Order allow,deny Allow from all </Proxy # ProxyVia On # ProxyPass /play/ http://localhost:9000/ # ProxyPassReverse /play/ http://localhost:9000/ ErrorLog /var/log/ispconfig/httpd/stage.domain.com/error.log ErrorDocument 400 /error/400.html ErrorDocument 401 /error/401.html ErrorDocument 403 /error/403.html ErrorDocument 404 /error/404.html ErrorDocument 405 /error/405.html ErrorDocument 500 /error/500.html ErrorDocument 502 /error/502.html ErrorDocument 503 /error/503.html <IfModule mod_ssl.c </IfModule <Directory /var/www/stage.domain.com/web Options FollowSymLinks AllowOverride All Order allow,deny Allow from all </Directory <Directory /var/www/clients/client2/web7/web Options FollowSymLinks AllowOverride All Order allow,deny Allow from all </Directory # Clear PHP settings of this website <FilesMatch "\.ph(p3?|tml)$" SetHandler None </FilesMatch # mod_php enabled AddType application/x-httpd-php .php .php3 .php4 .php5 php_admin_value sendmail_path "/usr/sbin/sendmail -t -i [email protected]" php_admin_value upload_tmp_dir /var/www/clients/client2/web7/tmp php_admin_value session.save_path /var/www/clients/client2/web7/tmp # PHPIniDir /var/www/conf/web7 php_admin_value open_basedir /var/www/clients/client2/web7/:/var/www/clients/client2/web7/web:/va$ # add support for apache mpm_itk <IfModule mpm_itk_module AssignUserId web7 client2 </IfModule <IfModule mod_dav_fs.c # Do not execute PHP files in webdav directory <Directory /var/www/clients/client2/web7/webdav <FilesMatch "\.ph(p3?|tml)$" SetHandler None </FilesMatch </Directory # DO NOT REMOVE THE COMMENTS! # IF YOU REMOVE THEM, WEBDAV WILL NOT WORK ANYMORE! # WEBDAV BEGIN # WEBDAV END </IfModule # <Location /play/ # ProxyPass http://localhost:9000/ # SetEnv force-proxy-request-1.0 1 # SetEnv proxy-nokeepalive 1 # </Location ProxyRequests Off ProxyPass /play/ http://localhost:9000/ ProxyPassReverse /play/ localhost:9000/ ProxyPass /play http://localhost:9000/ ProxyPassReverse /play http://localhost:9000/ # SetEnv force-proxy-request-1.0 1 # SetEnv proxy-nokeepalive 1 </VirtualHost This vhost file was generated by ispconfig and I have not touched anything that was there before just added onto. As you can see by the commented out parts I have tried a lot of different things based on random tutorials I have found but all of them have ended up in Internal Server Error, 503 and most often a '502 Bad Gateway`. I can start play and it does connect successfully to my database. I can get a page to show up when there is an error and the play! stack trace error pages comes up but where everything is fine I get one of the errors above. My application.conf file looks like this: db info ....... application.mode=PROD logger.root=ERROR # Logger used by the framework: logger.play=INFO # Logger provided to your application: logger.application=DEBUG http.path="/play/" XForwardedSupport="127.0.0.1" And my hosts file looks like this (I have never changed or added anything to the host file): 127.0.0.1 localhost 127.0.1.1 matrix # The following lines are desirable for IPv6 capable hosts ::1 ip6-localhost ip6-loopback fe00::0 ip6-localnet ff00::0 ip6-mcastprefix ff02::1 ip6-allnodes ff02::2 ip6-allrouters Any insights onto what I might be doing wrong or if theres anything I can try please let me know! Thanks!! Edit Again the reverse proxy will work (I checked with sending to to google.com). Its when there is a successful connection to Netty. It's like Netty refuses the connection to the page. Edit 2 output from apachectl -S _default_:8081 127.0.0.1 (/etc/apache2/sites-enabled/000-apps.vhost:10) *:8090 is a NameVirtualHost default server 127.0.0.1 (/etc/apache2/sites-enabled/000-ispconfig.vhost:10) port 8090 namevhost 127.0.0.1 (/etc/apache2/sites-enabled/000-ispconfig.vhost:10) *:80 is a NameVirtualHost default server 127.0.0.1 (/etc/apache2/sites-enabled/000-default:1) port 80 namevhost 127.0.0.1 (/etc/apache2/sites-enabled/000-default:1) port 80 namevhost domain.com (/etc/apache2/sites-enabled/100-domain.com.vhost:7) port 80 namevhost domain.com (/etc/apache2/sites-enabled/100-domain.com.vhost:7) port 80 namevhost domain.com (/etc/apache2/sites-enabled/100-domain.com.vhost:7) port 80 namevhost domain.com (/etc/apache2/sites-enabled/100-domain.com.vhost:7) port 80 namevhost domain.com (/etc/apache2/sites-enabled/100-domain.com.vhost:7) port 80 namevhost stage.domain.com (/etc/apache2/sites-enabled/100-stage.domain.com.vhost:7) port 80 namevhost domain.com (/etc/apache2/sites-enabled/100-domain.com.vhost:7)

  Read the article

• How to Set Linux Bonding Interface to Gigabit

  - by Kyle Brandt

  I have enabled Linux active backup mode bonding. Each interface is a gigabit interface, but the bond interface seems to end up at 100 Megabit: bonding: bond0: Warning: failed to get speed and duplex from eth1, assumed to be 100Mb/sec and Full. ... bnx2: eth0 NIC Link is Up, 1000 Mbps full duplex, receive & transmit flow control ON ... bonding: bond0: backup interface eth1 is now up ethtool apparently can't provide info on bond: sudo ethtool bond0 Settings for bond0: No data available So does this mean I am operating at 100 or 1000 Megabit (My guess is 1000)? If it is only 100, what options in the ifcfg scripts or the modprobe bonding options do I need to sett to make it 1000?

  Read the article

• How can I do `dir *.mp3` in bash?

  - by Andy

  Hi all, On Windows I used to quickly run a dir *.mp3 to find all files with an mp3 extension in the current directory. Is there a similarly quick way to do it with bash? The ls command seems to have a way to ignore a pattern, but not to show only the pattern. I can do find . -maxdepth 1 -iname '*.mp3' or ls|grep -i '\.mp3$' but neither of these flow out of my fingers in half a second or less;) Any quicker alternatives? TIA Andy

  Read the article

• Import GraphViz graph to Microsoft Word 14

  - by rmetzger

  I have created a GraphViz dot-file to visualize a data flow. I have to write a documentation using Microsoft Word and I'd like to include the graph in the document. For some wired reason, MS Word is not able to import SVG files. Then, I generated a .eps file using dot -Teps plan.dot -o plan.eps But once imported into Word, the picture looks horrible. I also tried to convert the svg to wmf using Inkscape. It also looked horrible. Is there a clean way to generate a file using GraphViz that Word can read?

  Read the article

• Openssh sftp-server: .filepart support?

  - by Guillaume Bodi

  I am trying to setup a SFTP server, running off Ubuntu Server 11.04. I installed openssh-server to provide SSH access. What I am trying to do is make file uploads run with a suffix (.filepart or whatever), which would be removed upon transfer completion. The flow idea is: User uploads cat.jpg The server starts writing cat.jpg.filepart in the destination directory Once the upload completes, the server trashes the previous cat.jpg (if any) and renames cat.jpg.filepart to cat.jpg This is to make sure that incomplete file uploads do not overwrite the existing files. Any idea on how I can do this? Thanks

  Read the article

• Tool to annotate pictures (screenshots) for documentation purposes?

  - by René Nyffenegger

  Long time ago, I saw someone use a software (on Windows) that was specifically created to annotate pictures. It made it simple to add arrows, boxes, circles in "outstanding" colors to the image. Unfortunatly, I don't remember what program that was. Now, I have to document a GUI and I'd like to use this software in order to annotate screenshots of the software so that I can show the order of flow and dependencies between various aspects of the GUI. I'd be very happy if someone could point me into the right direction.

  Read the article

• MS SQL dts to ssis migration error

  - by Manjot

  Hi, I have migrated some DTS packages to SSIS 2005 using "Migration" wizard. When I tried to run it, it fails saying you need a higher version of SSIS even though the destination SSIS server is on 9.0.4211 level. then I digged in the package using business intelligence studio and saw that one of the package subtasks is "Transform data task" (the dts version) and the package fails to run that. The storage location for this dts task is set to "Embedded in Task". I didn't touch it. why didn't it convert this task to an SSIS data flow task? any help please? Thansk in advance

  Read the article

• Cheapest server per gigabit throughput [closed]

  - by nethgirb

  I'm looking for a set of servers for performance testing a network, and secondarily testing some applications on the servers. Their most important task is simply to pump out data: from an application like memcached or just dumped from a large file in memory into a TCP flow (i.e., disk performance doesn't matter). This should happen over one or more 1 gigabit Ethernet ports, and the machines should run Linux (ideally), or perhaps Mac OS X or some other *nix. Other than that, there are few constraints (e.g., even something ARM-based could be fine). So here's the question: What's the cheapest server per gigabit? Price and power are both considerations.

  Read the article

• Forward the Wan IP to another Wan IP without changing the source address

  - by user195410

  I have tried this case by using the NAT function in iptables but fail example. PC A IP is 1.1.1.1 (Win7) My Server IP is 2.2.2.2 (CentOS 6.2) target Server B is 3.3.3.3 (Windows server 2003) Flow: PC A WanIP -- My Server A -- Server B (WanIP) My iptables rules: 1. iptables -t nat -A PREROUTING -d 2.2.2.2 -p tcp --dport 80 -j DNAT --to-destination 3.3.3.3:80 2. iptables -t nat -A POSTROUTING -d 2.2.2.2 -j MASQUERADE finally, i can access server B website by enter 2.2.2.2:80 but when i checked the access log at Server B i found it's source address had been changed to src:2.2.2.2 dst:3.3.3.3 please help me to do how to get the real address is src:1.1.1.1 dst:3.3.3.3

  Read the article

• Exchange 2013 Internal Relay via Smart Host

  - by Matt Clements

  Thank you for your help in advance! I am currently setting up an Exchange 2013 server, to replace our old POP3/SMTP system, however we would like to roll this out gradually when convenient for our staff. Our plan is therefore: Setup Exchange 2013 to retrieve email via POP Connector - Done Setup Exchange 2013 to send ALL mail via a SmartHost - Issues I have set the domains in Mail Flow Accepted Domains to Internal Relay, enabled a Smart Host for * as the domain name, and disabled/deleted the accounts that are not setup yet; however Exchange just bounces the emails with no errors.

  Read the article

• How to add a 'second elbow' to an 'elbow arrow connector' in Powerpoint 2007?

  - by ricebowl

  I'm trying to put together a relatively complex flow-chart thing -as part of a University assignment (health-related, and gosh, does my university love all things Microsoft Office...). Because of the way the chart progresses I have to connect two objects with a 'double elbow' version of the 'elbow arrow connector.' I accept that perhaps this complexity means I should redesign the chart, but I've tried and failed to simplify things already. If you'll pardon my ASCII art, this is what I have: +----------------+ | 1 | | | +-------+--------+ | | +-------+--------+ /\ |2 +--------|-----/ 3\ +----------------+ \ / \/ Shape 1 should connect to shape 3, currently the line doing so passes behind shape 2. The diagram below shows what I'd prefer, and, frankly, what I need to happen. +----------------+ | 1 | | | +-------+--------+ | +-----------+ +----------------+ | /\ |2 | +--/ 3\ +----------------+ \ / \/ Having explored the various right-click options I'm either being blind and not seeing it, or...well, I'm hoping it's just me being blind and/or stupid, frankly. If anyone has any suggestions they'd be gratefully received. I'm working with WinXP and Office 2007 (at the university, I run on Ubuntu at home, which possibly explains why I'm missing something potentially simple)...

  Read the article

• My linux server takes more than an hour to boot. Suggestions?

  - by jamieb

  I am building a CentOS 5.4 system that boots off a compact flash card using a card reader that emulates an IDE drive. It literally takes about an hour to boot. The ultra-slow part occurs when Grub is loading the kernel. Once that's done, the rest of the boot process only takes about a minute to get to a login prompt. Does anyone have any suggestions? I suspect that it may have to do with UDMA. Everything IDE-related in my BIOS seems to checkout. The read performance hdparm is telling me 1.77 MB/s. Ouch! (But even at that rate, it still shouldn't take an hour to decompress and load the kernel) [root@server ~]# hdparm -tT /dev/hdc /dev/hdc: Timing cached reads: 2444 MB in 2.00 seconds = 1222.04 MB/sec Timing buffered disk reads: 6 MB in 3.39 seconds = 1.77 MB/sec Trying to enable DMA is a no-go though: [root@server ~]# hdparm -d1 /dev/hdc /dev/hdc: setting using_dma to 1 (on) HDIO_SET_DMA failed: Operation not permitted using_dma = 0 (off) Here's some command outputs that might help: System [root@server ~]# uname -a Linux server.localdomain 2.6.18-164.el5xen #1 SMP Thu Sep 3 04:47:32 EDT 2009 i686 i686 i386 GNU/Linux PCI info: [root@server ~]# lspci -v 00:00.0 Host bridge: Intel Corporation 82945G/GZ/P/PL Memory Controller Hub (rev 02) Subsystem: Intel Corporation 82945G/GZ/P/PL Memory Controller Hub Flags: bus master, fast devsel, latency 0 Capabilities: [e0] Vendor Specific Information 00:02.0 VGA compatible controller: Intel Corporation 82945G/GZ Integrated Graphics Controller (rev 02) (prog-if 00 [VGA controller]) Subsystem: Intel Corporation 82945G/GZ Integrated Graphics Controller Flags: bus master, fast devsel, latency 0, IRQ 10 Memory at fdf00000 (32-bit, non-prefetchable) [size=512K] I/O ports at ff00 [size=8] Memory at d0000000 (32-bit, prefetchable) [size=256M] Memory at fdf80000 (32-bit, non-prefetchable) [size=256K] Capabilities: [90] Message Signalled Interrupts: 64bit- Queue=0/0 Enable- Capabilities: [d0] Power Management version 2 00:1d.0 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #1 (rev 01) (prog-if 00 [UHCI]) Subsystem: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #1 Flags: bus master, medium devsel, latency 0, IRQ 16 I/O ports at fe00 [size=32] 00:1d.1 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #2 (rev 01) (prog-if 00 [UHCI]) Subsystem: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #2 Flags: bus master, medium devsel, latency 0, IRQ 17 I/O ports at fd00 [size=32] 00:1d.2 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #3 (rev 01) (prog-if 00 [UHCI]) Subsystem: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #3 Flags: bus master, medium devsel, latency 0, IRQ 18 I/O ports at fc00 [size=32] 00:1d.3 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #4 (rev 01) (prog-if 00 [UHCI]) Subsystem: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #4 Flags: bus master, medium devsel, latency 0, IRQ 19 I/O ports at fb00 [size=32] 00:1d.7 USB Controller: Intel Corporation 82801G (ICH7 Family) USB2 EHCI Controller (rev 01) (prog-if 20 [EHCI]) Subsystem: Intel Corporation 82801G (ICH7 Family) USB2 EHCI Controller Flags: bus master, medium devsel, latency 0, IRQ 16 Memory at fdfff000 (32-bit, non-prefetchable) [size=1K] Capabilities: [50] Power Management version 2 Capabilities: [58] Debug port 00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev e1) (prog-if 01 [Subtractive decode]) Flags: bus master, fast devsel, latency 0 Bus: primary=00, secondary=01, subordinate=01, sec-latency=32 I/O behind bridge: 0000d000-0000dfff Memory behind bridge: fde00000-fdefffff Prefetchable memory behind bridge: 00000000fdd00000-00000000fdd00000 Capabilities: [50] #0d [0000] 00:1f.0 ISA bridge: Intel Corporation 82801GB/GR (ICH7 Family) LPC Interface Bridge (rev 01) Subsystem: Intel Corporation 82801GB/GR (ICH7 Family) LPC Interface Bridge Flags: bus master, medium devsel, latency 0 Capabilities: [e0] Vendor Specific Information 00:1f.2 IDE interface: Intel Corporation 82801GB/GR/GH (ICH7 Family) SATA IDE Controller (rev 01) (prog-if 80 [Master]) Subsystem: Intel Corporation 82801GB/GR/GH (ICH7 Family) SATA IDE Controller Flags: bus master, 66MHz, medium devsel, latency 0, IRQ 17 I/O ports at <unassigned> I/O ports at <unassigned> I/O ports at <unassigned> I/O ports at <unassigned> I/O ports at f800 [size=16] Capabilities: [70] Power Management version 2 00:1f.3 SMBus: Intel Corporation 82801G (ICH7 Family) SMBus Controller (rev 01) Subsystem: Intel Corporation 82801G (ICH7 Family) SMBus Controller Flags: medium devsel, IRQ 17 I/O ports at 0500 [size=32] 01:04.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 10) Subsystem: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ Flags: bus master, medium devsel, latency 32, IRQ 18 I/O ports at de00 [size=256] Memory at fdeff000 (32-bit, non-prefetchable) [size=256] Capabilities: [50] Power Management version 2 01:06.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 10) Subsystem: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ Flags: bus master, medium devsel, latency 32, IRQ 17 I/O ports at dc00 [size=256] Memory at fdefe000 (32-bit, non-prefetchable) [size=256] Capabilities: [50] Power Management version 2 01:07.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 10) Subsystem: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ Flags: bus master, medium devsel, latency 32, IRQ 19 I/O ports at da00 [size=256] Memory at fdefd000 (32-bit, non-prefetchable) [size=256] Capabilities: [50] Power Management version 2 hdparm ouput: [root@server ~]# hdparm /dev/hdc /dev/hdc: multcount = 0 (off) IO_support = 0 (default 16-bit) unmaskirq = 0 (off) using_dma = 0 (off) keepsettings = 0 (off) readonly = 0 (off) readahead = 256 (on) geometry = 8146/16/63, sectors = 8211168, start = 0 [root@server ~]# hdparm -I /dev/hdc /dev/hdc: ATA device, with non-removable media Model Number: InnoDisk Corp. - iCF4000 4GB Serial Number: 20091023AACA70000753 Firmware Revision: 081107 Standards: Supported: 5 Likely used: 6 Configuration: Logical max current cylinders 8146 8146 heads 16 16 sectors/track 63 63 -- CHS current addressable sectors: 8211168 LBA user addressable sectors: 8211168 device size with M = 1024*1024: 4009 MBytes device size with M = 1000*1000: 4204 MBytes (4 GB) Capabilities: LBA, IORDY(can be disabled) Standby timer values: spec'd by Vendor R/W multiple sector transfer: Max = 2 Current = 2 DMA: mdma0 mdma1 mdma2 udma0 udma1 *udma2 udma3 udma4 Cycle time: min=120ns recommended=120ns PIO: pio0 pio1 pio2 pio3 pio4 Cycle time: no flow control=120ns IORDY flow control=120ns Commands/features: Enabled Supported: * Power Management feature set * WRITE_BUFFER command * READ_BUFFER command * NOP cmd * CFA feature set * Mandatory FLUSH_CACHE HW reset results: CBLID- above Vih Device num = 0 CFA power mode 1: enabled and required by some commands Maximum current = 100ma Checksum: correct

  Read the article

• How to redirect http requests to https (nginx)

  - by spuder

  There appear to be many questions and guides out there that instruct how to setup nginx to redirect http requests to https. Many are outdated, or just flat out wrong. # MANAGED BY PUPPET upstream gitlab { server unix:/home/git/gitlab/tmp/sockets/gitlab.socket; } # setup server with or without https depending on gitlab::gitlab_ssl variable server { listen *:80; server_name gitlab.localdomain; server_tokens off; root /nowhere; rewrite ^ https://$server_name$request_uri permanent; } server { listen *:443 ssl default_server; server_name gitlab.localdomain; server_tokens off; root /home/git/gitlab/public; ssl on; ssl_certificate /etc/ssl/certs/ssl-cert-snakeoil.pem; ssl_certificate_key /etc/ssl/private/ssl-cert-snakeoil.key; ssl_protocols SSLv3 TLSv1 TLSv1.1 TLSv1.2; ssl_ciphers AES:HIGH:!ADH:!MDF; ssl_prefer_server_ciphers on; # individual nginx logs for this gitlab vhost access_log /var/log/nginx/gitlab_access.log; error_log /var/log/nginx/gitlab_error.log; location / { # serve static files from defined root folder;. # @gitlab is a named location for the upstream fallback, see below try_files $uri $uri/index.html $uri.html @gitlab; } # if a file, which is not found in the root folder is requested, # then the proxy pass the request to the upsteam (gitlab puma) location @gitlab { proxy_read_timeout 300; # https://github.com/gitlabhq/gitlabhq/issues/694 proxy_connect_timeout 300; # https://github.com/gitlabhq/gitlabhq/issues/694 proxy_redirect off; proxy_set_header X-Forwarded-Proto $scheme; proxy_set_header X-Forwarded-Ssl on; proxy_set_header Host $http_host; proxy_set_header X-Real-IP $remote_addr; proxy_pass http://gitlab; } } I've restarted after every configuration change, and yet I still only get the 'Welcome to nginx' page when visiting http://192.168.33.10. whereas https://192.168.33.10 works perfectly. Why will nginx still not redirect http requests to https? I've also tried the following configurations listen *:80; server_name <%= @fqdn %>; #root /nowhere; #rewrite ^ https://$server_name$request_uri? permanent; #rewrite ^ https://$server_name$request_uri permanent; #return 301 https://$server_name$request_uri; #return 301 http://$server_name$request_uri; #return 301 http://192.168.33.10$request_uri; return 301 http://$host$request_uri; The logs tailf /var/log/nginx/access.log 192.168.33.1 - - [22/Oct/2013:03:41:39 +0000] "GET / HTTP/1.1" 304 0 "-" "Mozilla/5.0 (Macintosh; Intel Mac OS X 10.8; rv:24.0) Gecko/20100101 Firefox/24.0" 192.168.33.1 - - [22/Oct/2013:03:44:43 +0000] "GET / HTTP/1.1" 200 133 "-" "Mozilla/5.0 (Macintosh; Intel Mac OS X 10.8; rv:24.0) Gecko/20100101 Firefox/24.0" tailf /var/log/nginx/gitlab_error.lob 2013/10/22 02:29:14 [crit] 27226#0: *1 connect() to unix:/home/git/gitlab/tmp/sockets/gitlab.socket failed (2: No such file or directory) while connecting to upstream, client: 192.168.33.1, server: gitlab.localdomain, request: "GET / HTTP/1.1", upstream: "http://unix:/home/git/gitlab/tmp/sockets/gitlab.socket:/", host: "192.168.33.10" Resources http://wiki.nginx.org/Pitfalls How to make nginx redirect How to force or redirect to SSL in nginx? nginx ssl redirect Nginx & Https Redirection https://www.tinywp.in/301-redirect-wordpress/ How to force or redirect to SSL in nginx?

  Read the article

• Visio 2010 Reverse Engineer Oracle

  - by digitall

  I have used Visio 2007 in the past to reverse engineer Oracle databases to get a flow scheme. I believe all Office 2007 products were x86 as well which is where I suspect my issue currently lies. I have since upgraded to Visio 2010 x64 and when I go to reverse engineer something from Oracle it shows up under Installed Visio Drivers but I can't seem to create a data source using it. My assumption here is it is because Oracle doesn't play nicely with x64 and with Visio being compiled as x64 I don't even get the option to use it. Has anyone done this with Visio 2010 x64 and Oracle yet? Or are there other tools you would recommend to reverse engineer and get a model such as the one generated by Visio?

  Read the article

• Why does TeamViewer launch a web server?

  - by OverTheRainbow

  Hello I just read this article which I find concerning: "After 90 minutes of troubleshooting, Nash traced the problem to TeamViewer, which he used to remotely administer the client's servers. It turns out the program had opened up its own webserver on the client's machine as soon as Apache went down and in the process made it impossible for the client, a large provider of business software, to restart its proper website." http://www.theregister.co.uk/2009/07/24/teamviewer_snafu/ I started using TeamViewer recently because it's just much better than UltraVNC (runs on both XP and Vista, the server dials out instead of requiring the user to open a port on their router + better performance than UVNC)... but I thought that TeamViewer had both the server and client connect out to TV's web server for data to flow between the two hosts. Why does TV even need to open a web server on the server host? Thank you.

  Read the article

• Firewalling gateways and IDS's

  - by Scott Davies

  Hi, For IDS, I plan to have a Win 2008 server running on the gateway with the majority of roles disabled. I plan to firewall the Internet connection, but I'd also like to install Snort to work as an IDS. However, I am guessing that regardless of the Snort install of the promiscuous Winpcap driver, I won't be able to monitor ports that the firewall blocks. My thinking is that chain of flow is: Internet-Firewall on Win 2008-Winpcap-Snort-internal network Is there a way to still monitor services that the firewall will block (i.e. TCP 445 SMB) ? Perhaps run the data through Snort and then through the firewall ? Thanks

  Read the article

• How to get Word 2003 to make my print layout go from left to right?

  - by Shaul

  My copy of MS Word 2003 was installed on my computer with the locale set to Israel, so among other things my Normal.dot template was set up for right-to-left. I managed to fix most of the Hebrew support things so that I am working in English by default now. The only thing I haven't found a cure for is how to make the "print layout" view also go from left to right; as things are, the page flow always appears from right to left, even in English documents - IOW, page 1 appears on the right of page 2, as shown below. I can't see any obvious option to change this. How do I do it?

  Read the article

• How do I connect to the serial console port os a Sunfire 280R?

  - by DrStalker

  We have a Sunfire 280R (old SPARC/Solaris server) that is refusing to come up after being relocated. We're trying to connect to the serial console port, but all we get is random gibberish on the screen. We've tried both connecting with a DB25DB9 adapter and using a DB-25-RJ45 adapter with a cisco RJ45-DB9 adapter to a windows laptop. We're configuring the laptop to 9600 baud, 8 bit, 1 stop bit, no parity. We've tried both no flow control and Xon/Xoff. We get the same results hooking up to the serial port on a working SPARC server, so it's probably something in our setup rather than a fault with the server. How do we get access to to serial console so we can work out what is stopping this box from getting to the network? Is there a special sun adapter we need to get/make to get the serial link working?

  Read the article

• CISCO 2911 Router configuration

  - by bala

  Device cisco 2911 router configuration support is required please. I have exchange server 2010 configured and working without any errors the problem is in cisco router configuration when exchange server sends emails out the receives WAN IP not the public ip. I have configured RDNS lookups with our MX record IP addesses that match the FQDN but all our emails are rejected because it does not match with the public ip. Receiving mails problem is not an problem all mails are coming through. i am sure i am missing something on the router configuration that does not sends the public ip, can any one help me to solve this issue. Note; I've got 1 WAN IP & 8 Public IP from ISP . Find below the running configuration. Building configuration... Current configuration : 2734 bytes ! ! Last configuration change at 06:32:13 UTC Tue Apr 3 2012 ! NVRAM config last updated at 06:32:14 UTC Tue Apr 3 2012 ! NVRAM config last updated at 06:32:14 UTC Tue Apr 3 2012 version 15.1 service timestamps debug datetime msec service timestamps log datetime msec service password-encryption ! hostname BSBG-LL ! boot-start-marker boot-end-marker ! ! enable secret 5 $x$xHrxxxxx5ox0 enable password 7 xx23xx5FxxE1xx044 ! no aaa new-model ! no ipv6 cef ip source-route ip cef ! ! ! ! ! ip flow-cache timeout active 1 ip domain name yourdomain.com ip name-server 213.42.20.20 ip name-server 195.229.241.222 multilink bundle-name authenticated ! ! crypto pki token default removal timeout 0 ! ! license udi pid CISCO2911/K9 ! ! username bsbg ! ! ! ! ! ! interface Embedded-Service-Engine0/0 no ip address shutdown ! interface GigabitEthernet0/0 ip address 192.168.0.9 255.255.255.0 ip flow ingress ip nat inside ip virtual-reassembly in duplex auto speed 100 no cdp enable ! interface GigabitEthernet0/1 ip address 213.42.xx.x2 255.255.255.252 ip nat outside ip virtual-reassembly in duplex auto speed auto no cdp enable ! interface GigabitEthernet0/2 no ip address shutdown duplex auto speed auto ! ip forward-protocol nd ! no ip http server no ip http secure-server ! ip nat inside source list 120 interface GigabitEthernet0/1 overload ip nat inside source static tcp 192.168.0.4 25 94.56.89.100 25 extendable ip nat inside source static tcp 192.168.0.4 53 94.56.89.100 53 extendable ip nat inside source static udp 192.168.0.4 53 94.56.89.100 53 extendable ip nat inside source static tcp 192.168.0.4 110 94.56.89.100 110 extendable ip nat inside source static tcp 192.168.0.4 443 94.56.89.100 443 extendable ip nat inside source static tcp 192.168.0.4 587 94.56.89.100 587 extendable ip nat inside source static tcp 192.168.0.4 995 94.56.89.100 995 extendable ip nat inside source static tcp 192.168.0.4 3389 94.56.89.100 3389 extendable ip nat inside source static tcp 192.168.0.4 443 94.56.89.101 443 extendable ip nat inside source static tcp 192.168.0.12 80 94.56.89.102 80 extendable ip nat inside source static tcp 192.168.0.12 443 94.56.89.102 443 extendable ip nat inside source static tcp 192.168.0.12 3389 94.56.89.102 3389 extendable ip route 0.0.0.0 0.0.0.0 213.42.69.41 ! access-list 120 permit ip 192.168.0.0 0.0.0.255 any ! ! ! control-plane ! ! ! line con 0 exec-timeout 5 0 line aux 0 line 2 no activation-character no exec transport preferred none transport input all transport output pad telnet rlogin lapb-ta mop udptn v120 ssh stopbits 1 line vty 0 4 password 7 xx64xxD530D26086Dxx login transport input all ! scheduler allocate 20000 1000 end

  Read the article

• Suppress EXT3-fs warning on mount

  - by STM

  I am familiar with output suppress on Unix machines, ie: cat /file/that/doesnt/exist > /dev/null 2>& However I can't seem to suppress the output of mount when an ext3 filesystem is mounted for the nth time, and it recommends an fsck. As it happens, fscks are run regularly by another machine, so these warning messages are needlessly interrupting the flow of output to my pretty bash script. These are the errors: # mount -t ext3 /dev/sda1 /mnt > /dev/null 2>& kjournald starting. Commit interval 5 seconds EXT3-fs warning: maximal mount count reached, running e2fsck is recommended EXT3 FS 2.4-0.9.19, 19 August 2002 on sd(8,1), internal journal EXT3-fs: mounted filesystem with ordered data mode. Can anyone shed some light on this? I'm clearly blocking both fd's, but somehow output is still getting through. This is GNU Bash v2.05a

  Read the article

• What software supports full multisession CD burning on windows?

  - by dma_k

  I know, that beating Nero in this field is very difficult. I have looked through best software listed in wiki, also checked the related posts here and here: most of the software either allows you to create ISO image and/or burn the existing image. However I am interested in the following flow: Import previous session Add/rename/remove files and directories Burn new session UltraISO is very good in (1) and (2). But it cannot append a disk with new session. InfraRecorder/CDBurnerXP can do (1) (2) (3) but: InfraRecorder crashes when trying to import some Nero sessions CDBurnerXP does not allow to move files in previous session to another directories. Is anybody here happy with any other free software?

  Read the article

< Previous Page | 119 120 121 122 123 124 125 126 127 128 129 130  | Next Page >