Search Results

Search found 4070 results on 163 pages for 'intel centrino'.

Page 123/163 | < Previous Page | 119 120 121 122 123 124 125 126 127 128 129 130  | Next Page >

  • External microphone not working

    - by haireefairee
    gnome-volume-control does not recognise external hardware. My headphones work nonetheless, but an external microphone does not. External microphones used to work, but at times were temperamental - I would have to login or logout with or without microphone plugged in. I am running Ubuntu 10.04 LTS (Lucid Lynx) on an mSi U100 wind notebook with one Intel soundcard and trying to use a jack microphone which has worked previously. USB microphones have also been problematic. I have done the basics: Installed upgrades. Checked nothing is muted. Looked for the device on gnome-volume-control. Tried using a different microphone that works on a friends computer. Tested my microphone works when using a different computer. Checked my soundcard can be seen (cat /proc/asound/cards). I have done more complicated things: I have tried playing around with settings in alsamixer. Nothing is muted. I can adjust "mic" and "internal mic" regardless of whether an external microphone is plugged in. I have the choice of input source from "mic", "front mic", "line" and "CD". I've played around changing this and it hasn't helped. I only have one CAPTURE option. In gnome-sound-recorder I have the choice of line, microphone 1 and microphone 2. I have played around changing this option. None of these pick up sound from the external microphone. Microphone 2 is the microphone on my laptop which is bad quality. In gnome-sound-recorder I have the choice of different profiles, and changing this has not helped either. I have looked at gstreamer-properties but none of that seemed helpful. I don't know if there a way to check if these external devices are being picked up. I would like to make an external microphone work. Please help!

    Read the article

  • Announcing Unbreakable Enterprise Kernel Release 3 for Oracle Linux

    - by Lenz Grimmer
    We are excited to announce the general availability of the Unbreakable Enterprise Kernel Release 3 for Oracle Linux 6. The Unbreakable Enterprise Kernel Release 3 (UEK R3) is Oracle's third major supported release of its heavily tested and optimized Linux kernel for Oracle Linux 6 on the x86_64 architecture. UEK R3 is based on mainline Linux version 3.8.13. Some notable highlights of this release include: Inclusion of DTrace for Linux into the kernel (no longer a separate kernel image). DTrace for Linux now supports probes for user-space statically defined tracing (USDT) in programs that have been modified to include embedded static probe points Production support for Linux containers (LXC) which were previously released as a technology preview Btrfs file system improvements (subvolume-aware quota groups, cross-subvolume reflinks, btrfs send/receive to transfer file system snapshots or incremental differences, file hole punching, hot-replacing of failed disk devices, device statistics) Improved support for Control Groups (cgroups)  The ext4 file system can now store the content of a small file inside the inode (inline_data) TCP fast open (TFO) can speed up the opening of successive TCP connections between two endpoints FUSE file system performance improvements on NUMA systems Support for the Intel Ivy Bridge (IVB) processor family Integration of the OpenFabrics Enterprise Distribution (OFED) 2.0 stack, supporting a wide range of Infinband protocols including updates to Oracle's Reliable Datagram Sockets (RDS) Numerous driver updates in close coordination with our hardware partners UEK R3 uses the same versioning model as the mainline Linux kernel version. Unlike in UEK R2 (which identifies itself as version "2.6.39", even though it is based on mainline Linux 3.0.x), "uname" returns the actual version number (3.8.13). For further details on the new features, changes and any known issues, please consult the Release Notes. The Unbreakable Enterprise Kernel Release 3 and related packages can be installed using the yum package management tool on Oracle Linux 6 Update 4 or newer, both from the Unbreakable Linux Network (ULN) and our public yum server. Please follow the installation instructions in the Release Notes for a detailed description of the steps involved. The kernel source tree will also available via the git source code revision control system from https://oss.oracle.com/git/?p=linux-uek3-3.8.git If you would like to discuss your experiences with Oracle Linux and UEK R3, we look forward to your feedback on our public Oracle Linux Forum.

    Read the article

  • How can I reinstall XRandR without serious disruption to 12.04?

    - by broiyan
    This is the sequence that leads to xrandr going missing: Installed 12.04 on a system with a motherboard using the Intel G45 chipset and the E8400 Core 2 Duo and AMD Radeon HD 5450 video card. Installed fglrx when ubuntu prompted via Additional Drivers. Ran Catalyst (Administrative) to select multi-desktop and rebooted. Ran Catalyst (Administrative) to select Xinerama and rebooted. Answer yes to about 3 prompts that request to send bug reports to ubuntu. At this point Settings > Appearances no longer offers the widget that allows you to resize the Unity Launcher icons. Also Settings > Displays says randr extension is not present. BTW: This same sequence is repeatable, including the issues with the missing icon resizer and xrandr, so there is clearly bug fixing potential here. How can I get xrandr reinstalled without un-installing a large set of dependencies? I realize that if I un-install xrandr I will have the chance to re-install but the number of dependencies is large and so an un-install will cause many systems to be un-installed and I am afraid that will ruin Ubuntu 12.04. Hence, I'm looking for a more direct fix. I thought rebooting the .ISO disk and reinstalling would be a good fix but obviously not since this problem is repeatable.

    Read the article

  • Window borders missing - gtk-window-decorator segmentation fault

    - by Balakrshnan Ramakrishnan
    I have been using Ubuntu for about 1 year now and I got a problem just two days ago. Suddenly I started experiencing a problem with the window borders (title bar with close, maximize, and minimize buttons). The problem : The window borders disappear I run "gtk-window-decorator --replace" For like 20 seconds everything is back to normal But it again returns to the problem. I searched over the Internet and found that my problem is similar to what is specified in this bug report: https://bugs.launchpad.net/ubuntu/+source/compiz/+bug/814091 This bug report says that the "fix released". I updated everything using the Update Manager, but still the problem remains. Can anyone let me know whether the problem is fixed? If yes, can you please let me know how to do it? I have already tried normal replace/reset commands like unity --reset unity --replace compiz --replace The "window borders" plugin is on in CCSM (CompizConfig Settings Manager) and it points to "gtk-window-decorator". I use Ubuntu 11.10 on an Intel Core2Duo T6500 with AMD Mobility Radeon HD 4300 graphics card. If you need more information, please let me know.

    Read the article

  • Can't adjust backlight on an Nvidia 335m GT

    - by Vladimir
    I have a laptop mySN QMG6 / Chiligreen Mobilitas NW which is Quanta TW9 barebone with intel i3 and nvidia 335m GT onboard. On ubuntu distros 10.04, 10.10, 11.04 and 11.10 i had problem with changing screen backlight with nouveau and nvidia drivers. FN+F4/F5 buttons did not change my brightness. I tried to edit xorg.conf, adding Option “RegistryDwords” “EnableBrightnessControl=1? Also tried to add some lines to grub acpi_osi="Linux" acpi_backlight=vendor Neither worked for me. Today I installed Ubuntu 12.04 beta2 and... With nouveau driver my FN key works, and changes the brightness (is it a new 3.0.22 linux kernel, or patched nouveau driver, i don't know). This is a big step forward. But, when installing proprietary nvidia driver (295.33) FN button stops working and i can't change brightness. I also tried workaround with xorg and grub with no result. Tried to install acpi from apt - no result. Is there anything left to try? I really need that nvidia driver working with FN keys, as i would like to have a working 3D acceleration. P.S. Does the nouveau driver has 3d acceleration like nvidia drivers??? If there is need to provide some log data, please write what should i print, as i'm a bit new to Ubuntu. P.P.S. Same problems i had with other Linux distros (Mint, Fedora and others) P.P.P.S. Other FN buttons work with both drivers (Mute, VOL UP/DOWN, WiFi on/off, Bluetooth, Sleep, Start/Pause, Stop, Next/Prev song) Some new thoughts... CONFIG_BACKLIGHT_GENERIC=m could this be an issue? Made this by grep BACKLIGHT /boot/config-3.2.0-22-generic-pae Full grep output can be viewed here: http://pastebin.com/sMRd2Z4k

    Read the article

  • Sound & video problem with Toshiba Satellite L35-SP1011

    - by Diego Garcia
    I've installed Ubuntu 10.04 on a Satellite L35-SP1011 and there's no sound. Actually i have many video problems cause i had to disable effect because when it had effect activated, laptop got frozen many times. I saw this problem but in older ubuntu versions and tried some fixes without success. Any idea on how to solve my audio and video problems? I've tried these instructions https://help.ubuntu.com/community/RadeonDriver without success. My video card is a ATI Express 200M. lspci output 00:14.2 Audio device: ATI Technologies Inc IXP SB4x0 High Definition Audio Controller (rev 01) 00:14.3 ISA bridge: ATI Technologies Inc IXP SB400 PCI-ISA Bridge (rev 80) 00:14.4 PCI bridge: ATI Technologies Inc IXP SB400 PCI-PCI Bridge (rev 80) 01:05.0 VGA compatible controller: ATI Technologies Inc RC410 [Radeon Xpress 200M] complete lspci output at http://pastebin.com/AVk1WWQt Update #1 - It's the same on Ubuntu 10.10 and Kubuntu 10.10... Slow graphics, and no sound. Update #2 - Sound SOLVED I edited /etc/modprobe/alsa-base.conf in Ubuntu 10.10 and added options snd-hda-intel model=asus Now i'm working on video, I added xorg-edgers ppa, updated and upgraded without big difference... it's working better but without transparency.

    Read the article

  • Black screen after grub kernal selection menu

    - by skip
    I have an Acer eMachines e727 with Intel GMA 4500M integrated graphics (drivers updated to latest). I installed Ubuntu 12.04 using Wubi. All is well until I select the kernal (first one on the list). My display goes black. I searched for solutions and found one on Unbuntu forum which partially helped. Following that sticky post, I pressed "e" at the kernal listings. I changed the $Linux... default line to "quiet splash nomodeset" and was able to get to the login screen and desktop. I edited grub to make the nomodeset permanent (also removed the vt command as recommended). I followed through with changing grub to match the graphics as recommended in the article using the grub cli (using info from vbeinfo). I updated grub with the recommended settings but still get the black screen after selecting the kernal. Only nomodeset works to get me to the login and desktop. Once I get to the desktop, my display resolution shows being set to 1024x768 but it actually looks like 800x680. What do I need to do to get past these issues? Thanks!

    Read the article

  • How to install OpenCV without nVidia drivers

    - by Subhamoy Sengupta
    I have a laptop with on-board Intel graphics. I have been using OpenCV for years with this machine and I have managed to avoid manual compilation so far. But in Ubuntu 13.10, when I try to install libopencv-dev from the repositories, it brings along libopencv-ocl, which seems to be dependent on nvidia drivers. Letting the driver install messes up my xserver completely and when I do glxinfo afterwards, I get this: name of display: :0.0 Xlib: extension "GLX" missing on display ":0.0". Xlib: extension "GLX" missing on display ":0.0". Xlib: extension "GLX" missing on display ":0.0". Xlib: extension "GLX" missing on display ":0.0". Xlib: extension "GLX" missing on display ":0.0". Error: couldn't find RGB GLX visual or fbconfig Xlib: extension "GLX" missing on display ":0.0". Xlib: extension "GLX" missing on display ":0.0". Xlib: extension "GLX" missing on display ":0.0". Xlib: extension "GLX" missing on display ":0.0". Xlib: extension "GLX" missing on display ":0.0". Xlib: extension "GLX" missing on display ":0.0". Xlib: extension "GLX" missing on display ":0.0". To solve this, I purge all nVidia drivers and reinstall xserver, much like it has been suggested here, and when I purge the nvidia drivers, OpenCV development libraries are also removed, as apt-get tells me they are no longer needed. This is foreign to me, because I expected a warning that I have installed packages that depend on this, but how can removing a dependency automatically remove the package I installed without warnings or asking? I understand it has something to do with nVidia being the provider of the libopencv-ocl in the repo. How could I get around it? I would rather not compile OpenCV if I can help it. I have seen similar questions, but not a suitable answer.

    Read the article

  • AMR's 2010 Supply Chain Top 25 Report: Early Predictions

    - by [email protected]
    On April 6th, AMR's Debra Hoffman and Kevin O'Marah presented their annual 'Top 25 Supply Chain' predictions.  For supply chain professionals, it was a 'must-hear' event especially with the new focus on both operational excellence as well as innovation excellence.  Most people think of R&D as the primary driver for innovation, but in today's 'new-normal' firms need to constantly review, evaluate and update their workflow procedures and business processes to maintian a sharp-blade on the leading edge.  Having the right tools in place to be able to monitor supply chain effectiveness becomes paramount to firms as they compete in the global marketplace. Organizations need  user-friendly and role based dashboards with early alerts to contextualize activities and post the best-options for managers to make better and more informed decisions. 2009 Winners were 1.Apple 2.Dell 3.P&G 4.IBM 5.Cisco 6.Nokia 7. Walmart 8.Samsung 9.PepsiCo 10.Toyota 11.Schulmberger 12. J&J 13.Coke 14. Nike 15.Tesco 16.Disney 17.HP 18.TI 19.LockheedMartin 20.Colgate 21.BestBuy 22.Unilever 23.Publix 24.SonyEricsson 25.Intel    

    Read the article

  • Which Ubuntu version to use on a MAXDATA laptop Eco 3100X ? with this system info

    - by Erjet Malaj
    i am speaking as new ubuntu user, i just have installed ubuntu 10.04 on my laptop, but is running very slow... So i am here to ask you a question: WHich ubuntu version can fit for my laptop MAXDATA Eco 3100x, . My Laptop System Information are: SYSTEM INFORMATION Running Ubuntu Linux, the Ubuntu 10.04 (lucid) release. GNOME: 2.30.2 (Ubuntu 2010-06-25) Kernel version: 2.6.32-40-generic (#87-Ubuntu SMP Mon Mar 5 20:26:31 UTC 2012) GCC: 4.4.3 (i486-linux-gnu) Xorg: unknown (25 February 2012 06:59:39AM) (25 February 2012 06:59:39AM) Hostname: lotus-laptop Uptime: 0 days 1 h 6 min CPU INFORMATION GenuineIntel, Intel(R) Pentium(R) 4 CPU 2.40GHz Number of CPUs: 1 CPU clock currently at 2390.561 MHz with 512 KB cache Numbering: family(15) model(2) stepping(7) Bogomips: 4781.12 Flags: fpu vme de pse tsc msr pae mce cx8 mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe up pebs bts cid MEMORY INFORMATION Total memory: 228 MB Total swap: 455 MB STORAGE INFORMATION SCSI device - scsi0 Vendor: ATA Model: IBM-DJSA-210 SCSI device - scsi1 Vendor: TOSHIBA Model: DVD-ROM SD-C2502 HARDWARE INFORMATION MOTHERBOARD Host bridge Silicon Integrated Systems [SiS] 650/M650 Host (rev 11) PCI bridge(s) Silicon Integrated Systems [SiS] Virtual PCI-to-PCI bridge (AGP) Silicon Integrated Systems [SiS] Virtual PCI-to-PCI bridge (AGP) USB controller(s) Silicon Integrated Systems [SiS] USB 1.1 Controller (rev 0f) (prog-if 10) Silicon Integrated Systems [SiS] USB 1.1 Controller (rev 0f) (prog-if 10) Silicon Integrated Systems [SiS] USB 1.1 Controller (rev 0f) (prog-if 10) Silicon Integrated Systems [SiS] USB 2.0 Controller (prog-if 20) Silicon Integrated Systems [SiS] USB 1.1 Controller (rev 0f) (prog-if 10) Silicon Integrated Systems [SiS] USB 1.1 Controller (rev 0f) (prog-if 10) Silicon Integrated Systems [SiS] USB 1.1 Controller (rev 0f) (prog-if 10) Silicon Integrated Systems [SiS] USB 2.0 Controller (prog-if 20) ISA bridge Silicon Integrated Systems [SiS] SiS962 [MuTIOL Media IO] (rev 04) IDE interface Silicon Integrated Systems [SiS] 5513 [IDE] (prog-if 80 [Master]) Subsystem: Silicon Integrated Systems [SiS] 5513 [IDE] GRAPHIC CARD VGA controller Silicon Integrated Systems [SiS] 65x/M650/740 PCI/AGP VGA Display Adapter Subsystem: Uniwill Computer Corp Device 5103 SOUND CARD Multimedia controller Silicon Integrated Systems [SiS] AC'97 Sound Controller (rev a0) Subsystem: Uniwill Computer Corp Device 5203 NETWORK Ethernet controller Silicon Integrated Systems [SiS] SiS900 PCI Fast Ethernet (rev 91) Subsystem: Uniwill Computer Corp Device 5002 Modem Silicon Integrated Systems [SiS] AC'97 Modem Controller (rev a0) Subsystem: Uniwill Computer Corp Device 4003 Thanks you asap. :-) E

    Read the article

  • Running 64 bit Ubuntu distribution from 32 bit Ubuntu

    - by csg
    Related to this question How do I run qemu with 64bit processor on a 64bit machine?, I'm trying to run latest ubuntu 11.10 64bit distribution under Ubuntu 11.04 32 bit using qemu on a core2duo (64 bit cpu) machine, using following qemu parameters with no success. Error under qemu: "This kernel required an x86-64 CPU, but only detected an i686 CPU. Unable to boot - please use a kernel appropiate for your CPU" Isn't qemu suppose to emulate a 64 bit machine? I think I'm missing something, but I can't figure it out. qemu -cpu (kvm64|core2duo|qemu64) -boot d -cdrom ubuntu-11.10-desktop-amd64.iso qemu-system-x86_64 -boot d -cdrom ubuntu-11.10-desktop-amd64.iso Here is my uname -m i686 Here is my /proc/cpuinfo processor : 1 vendor_id : GenuineIntel cpu family : 6 model : 23 model name : Intel(R) Core(TM)2 Duo CPU P8400 @ 2.26GHz stepping : 6 cpu MHz : 800.000 cache size : 3072 KB physical id : 0 siblings : 2 core id : 1 cpu cores : 2 apicid : 1 initial apicid : 1 fdiv_bug : no hlt_bug : no f00f_bug : no coma_bug : no fpu : yes fpu_exception : yes cpuid level : 10 wp : yes flags : fpu vme de pse tsc msr pae mce cx8 apic mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe nx lm constant_tsc arch_perfmon pebs bts aperfmperf pni dtes64 monitor ds_cpl vmx smx est tm2 ssse3 cx16 xtpr pdcm sse4_1 lahf_lm dts tpr_shadow vnmi flexpriority bogomips : 4522.45 clflush size : 64 cache_alignment : 64 address sizes : 36 bits physical, 48 bits virtual power management:

    Read the article

  • EVENT RECAP: Oracle Day & Product Fair - Atlanta

    - by cwarticki
    Are you attending any of the Oracle Days and other Events? They are fantastic!  Keep track of the Oracle Events by following @OracleEvents on Twitter.  Also, stay in the know by subscribing to one of the several Oracle Newsletters. Those will also keep you posted of upcoming in-person and webcast events. From the Oracle Events website, simply navigate to your geography and refine your options to locate what interests you. You can also perform keyword searches. Yesterday, I had the opportunity to participate in the Oracle Day & Product Fair in Atlanta, Georgia.  Thanks to those who stopped by to ask your support questions and watch me demo My Oracle Support features and best practices. It was a fantastic turnout.  The Buckhead Theatre provided served as an excellent venue. It was standing room only for the double keynotes on topics of interest to our customers: Navigating Complexity by Simplifying I.T., and Oracle Exadata X3-Transforming Data Management. The Product Fair was staffed by many Oracle professionals and our Partners too.  It was great meeting new people like the team representing OAUG.  Many thanks to our sponsors: BIAS, Cloudera, Intel and TekStream Solutions.Come attend one of the many Oracle Days & other events planned for you. I'll be attending the one Ft. Lauderdale, FL on November 16th. See you there. -Chris WartickiGlobal Customer Management

    Read the article

  • KDE not loading without nomode tag in grub and bad resolution [migrated]

    - by fcole90
    I recently installed Linux Mint 13 KDE but it's not working fine. At first I had to use failsafe mode to boot because normal boot takes to a textual login. If I use normal boot and text login I'm not able to run KDE nor with kdm start neither with startx. kdm says that's already running. Instead X is not able to run because can't connect Xserver to display. If I stop kdm and starx again doesn't change anything. Now I edited the grub to load in nomode. In that way KDE loads but resolution is wrong and xrandr doesn't help, because if I do this: cvt 1366 768 it changes it to 1368: # 1368x768 59.88 Hz (CVT) hsync: 47.79 kHz; pclk: 85.25 MHz Modeline "1368x768_60.00" 85.25 1368 1440 1576 1784 768 771 781 798 -hsync +vsync I also installed bumblebee and nvidia drivers because of optimus technology.. It worked just to have fun with glxspheres but there isn't any gain on KDE.. This is lspci output: fabio@fabio-EasyNote-TS11HR ~ $ lspci |grep VGA 00:02.0 VGA compatible controller: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller (rev 09) 01:00.0 VGA compatible controller: NVIDIA Corporation GF108 [GeForce GT 540M] (rev ff My notebook is an EasyNote TS with NVIDIA GeForce GT 540M. Thank you in advance to anyone that may help!

    Read the article

  • How should I configure TRIM Support for LVM logical volumes?

    - by Zack Perry
    I am setting up a notebook for software demo purpose. The machine has a Intel Core i7 CPU, 8GB RAM, a 128GB SSD, and runs Ubuntu 12.04 LTS 64bit desktop. As it is, the SSD is configured to have a single volume group, with /boot, /swap, and / all in their respective logical volumes. They collectively consume 30GB space. I plan to use the remaining for logical volumes for KVM guests, all run Ubuntu 12.04 Server I would like to ensure that the SSD is utilized optimally. Although on this site, there are some great info about setting up TRIM support for file system setups that do not involve LVM, I have not found explicit guide regarding my planned setup. I did found this page which talks about adding issue_discards in /etc/lvm/lvm.conf. But in said file on my machine, I didn't find the cited content. I double-checked man lvm.conf(5), didn't see any mentioning of this option either. Thus, I'm not sure what to do. Furthermore, even say adding the option is the right thing to do, should I in my machine's /etc/fstab still add mount options such as noatime etc? Any tips, pointers, and/or further guidance are greatly appreciated.

    Read the article

  • High load (and high temp) with idle processes

    - by Nanne
    I've got a semi-old laptop (toshiba satellite a110-228), that's appointed 'laptop for the kids' by my sister. I've installed ubuntu netbook (10.10) on it because of the lack-of memory and it seems to work fine, accept from some heat-issues. These where never a problem under windows. It looks like I've got something similar to this problem: Load is generally 1 or higher, sometimes its stuck at 0.80, but its way to high. Top/htop only show a couple of percentage CPU use (which isn't too shocking, as i'm not doing anything). At this point all the software is stock, and i'd like to keep it that way because its supposed to be the easy-to-maintain kids computer. Now I'd like to find out: What could be the cause of the high load? Could it be as this thread implies, some driver, are there other options to check? How could I see what is really keeping the system hot and bothered? How to check what runs, etc etc? I'd like to pinpoint the culprint. further steps to take for debugging? The big bad internet leads me to believe that it might be the graphics drivers. The laptop has an Intel 945M chipset, but that doesn't seem to be one of the problem childs in this manner (I read a lot abotu ATI drivers that need special isntall). I'd not only welcome hints to directly solve this (duh) but also help in starting to debug what is going on. I am really hesitant in installing an older kernel, as I want it to be stock, and easy upgradeable (because I don't live near it, it should run without me ;) ) As an afterthought: to keep the whole thing cooler, can I 'amp up' the fancontrol? Its only going "airplane" mode when the computer is 95 Celcius, which is a tad late for my taste. Top: powertop:

    Read the article

  • chromium-browser usus 99,99% IO disk

    - by lars
    My favorite browser: chromium is testing my patience. For some reason it sometimes uses 99,99% of I/O. (reading 2-3MB/s) Other processes (updatedb.mlocate, [kswapd0], clementine, compiz) show the same behavior. However this problem always starts and ends with chromium. To illustrate the impact on my system: when my disk starts to spin like crazy en the led burns continiously the system is so slow that it takes about two to five minuits to switch to tty6, log in and execute "killall chromiumbrowser && killall chromium" This is way faster than starting a new terminal in X, just starting a terminal seems to heavy for compiz under these circumstances. Waiting until its over takes more than 30 minuits, if it ends at all. The exact circumstances are difficult to replicate. Several tabs have to be open, usualy 8 or more. It seems that the chance to increases when more complex sites like gmail of plugins like flash are running. Opening several new tabs at omgubunt.co.uk has the best chance to replecate this isue. I have no idea where to start looking for a solution. Any help would be greatly apreciated ubuntu 12.10 | 2GB | 2x 1.66GHz Intel | 32bit | IBM Thinkpad R60e

    Read the article

  • Cannot make Wi-Fi hotspot

    - by Junaid
    I want to make my laptop as wi-fi hotspot. To do so, I pressed button Settings-Network-Wireless-Use as Hotspot.. Then it creates a wireless network connection 'Hostspot' and connects. But it gets disconnected just after making connection. Here is my network hardware info: sudo lshw -C network *-network description: Wireless interface product: WiFi Link 5100 vendor: Intel Corporation physical id: 0 bus info: pci@0000:04:00.0 logical name: wlan0 version: 00 serial: width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list ethernet physical wireless configuration: broadcast=yes driver=iwlagn driverversion=3.0.0-12-generic firmware=8.83.5.1 build 33692 latency=0 link=no multicast=yes wireless=IEEE 802.11abgn resources: irq:47 memory:d9200000-d9201fff *-network description: Ethernet interface product: RTL8111/8168B PCI Express Gigabit Ethernet controller vendor: Realtek Semiconductor Co., Ltd. physical id: 0 bus info: pci@0000:05:00.0 logical name: eth0 version: 02 serial: size: 100Mbit/s capacity: 1Gbit/s width: 64 bits clock: 33MHz capabilities: pm msi pciexpress msix vpd bus_master cap_list rom ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd 1000bt 1000bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=r8169 driverversion=2.3LK-NAPI duplex=full firmware=N/A ip=192.168.1.4 latency=0 link=yes multicast=yes port=MII speed=100Mbit/s resources: irq:45 ioport:2000(size=256) memory:d5010000-d5010fff memory:d5000000-d500ffff memory:d5020000-d502ffff My machine is running on Ubuntu 11.10 Can anybody help in it? Thanks

    Read the article

  • Can't access my accelerated hard disk from msdos after installing linux on ssd cache

    - by Chibueze Opata
    I mistakenly installed Ubuntu on my ssd (forgot my PC actually came with one), when it detected a ~31GiB disk that it wanted to install to, I was a bit confused since I had brought out 30Gb in my primary disk for it, but I clicked continue. After installation, I tried to boot back into my Windows and it brought out some Intel Raid Disk Utility stuff saying I should disable acceleration on a disk something couldn't be found, I canceled it but whatever I tried, recovery tools, setups etc, I couldn't just access the drive which was apparently using the SSD as cache. Since then I've been stuck. I tried setting the 'raid' flag to the disk from 'gParted', still I couldn't. I tried the diskraid utility from windows recover disk, it said it couldn't detect any raid, diskpart sees the partition but doesn't see the volume, when I remove the raid flag, it sees the volume as one of raw type, and I can't access anything. I can however mount the drive from terminal in Ubuntu and access my files, but I don't have any backup media at the moment so I can do a factory re-install. Please how do I go about solving the issue, precisely I would like to know how to boot into the drive again. Thanks!

    Read the article

  • Amazon Kindle Fire User Agent String

    - by Gopinath
    Today I was searching for Amazon Kindle Fire user agent string so that I can trick websites as if I’m browsing using Kindle Fire. To my surprise I found the following two variants of user agents listed on blogs but not sure which one is right or if Kindle Fire generating two types of User Agent strings. The first one is given by the prominent blogger and WSJ tech columnist Amit Agarwal and I vote for him as he is a highly reputed person. Mozilla/5.0 (Linux; U; Android 2.3.4; en-us; Kindle Fire Build/GINGERBREAD) AppleWebKit/533.1 (KHTML, like Gecko) Version/4.0 Mobile Safari/533.1 The second variant is found on this website and I’m not sure about the authority of the blogger. Mozilla/5.0 (Macintosh; U; Intel Mac OS X 10_6_3; en-us; Silk/1.1.0-80) AppleWebKit/533.16 (KHTML, like Gecko) Version/5.0 Safari/533.16 Silk-Accelerated=true This article titled,Amazon Kindle Fire User Agent String, was originally published at Tech Dreams. Grab our rss feed or fan us on Facebook to get updates from us.

    Read the article

  • Installation failed with a Blank Screen

    - by Bear
    Blank Screen, no Fix I've tried works... Hardware conflict maybe? First I tried AMD64 Ubuntu desktop. I got into the boot screen, however selecting install returns 1-2 seconds of code then blank screen no-idle. Then I tried the alternate install. Worked, some additional software installs failed. Go to boot for first time, I see BIOS load then black/blank screen. No flicker or cursor... screen turns off. (I am also having issues installing any 64bit OS legit WIN 7 64 Ult., WinXP 64 PRO ISO, also WinXP 32 Legit, WinXP 64Pro ISO returns BSOD on install. All win 7 builds return with CD/DVD driver error. The only OS that installs is beta build 7000 win 7.) Please help! I am using: BIOS Build = E7696AMS V1.5 HDD = Hitachi HDP725050GLA 500.00 GB (SATA) CDD = Optiarc DVD RW AD-72 (SATA) MOBO = MSI A75MA-G55 AMD A Series Motherboard - Micro ATX, Socket FM1, AMD A75 Chipset, 1866MHz DDR3 (O.C.), SATA 6.0 Gb/s, 8-CH Audio, Gigabit LAN, SuperSpeed USB 3.0, AMD Dual Graphics Ready CPU = AMD A6-Series AD3650WNGXBOX Quad-Core A6-3650 APU - 4MB L2 Cache, 2.6GHz, Socket FM1, Radeon HD 6530D (320 Cores), Dual Graphics Ready, DirectX 11 RAM = Corsair CMZ16GX3M4A1600C9B Vengeance Desktop Memory Kit - 16GB (4x 4GB), PC3-12800, DDR3-1600MHz, 9-9-9-24 CAS Latency, Intel XMP Ready, Unbuffered

    Read the article

  • How to Reach German Developers: dotnet Cologne 2011

    - by WeigeltRo
    If you want to promote tools, technologies, libraries, trainings or anything else of interest to software developers, you want to reach the right audience. Not the 9-to-5 people, but those who have the knowledge and passion that make them important multipliers. A great way to reach these people are community conferences. They are not the kind of conference that the 9-to-5 folks are “sent to” by their company, but that the right people hear of via Twitter, Facebook, blogs or plain old word-of-mouth and choose to go to, often covering the costs for the day themselves (travel, entrance fee, hotel, taking the day off). If you want to reach German developers there is one conference that has emerged as the large .NET community conference in Germany, quickly growing beyond being just a local event: The dotnet Cologne, that will be held for the third time on May 6, 2011 and that I’m co-organizing (this interview gives you a good idea of the history). This year’s dotnet Cologne 2010 with its 300 attendees was a huge success. As in the year before, the conference was sold out weeks in advance, and feedback by attendees and sponsors was positive throughout. And the list of speakers and attendees sounded like a “who is who” of the German .NET community. Whether you‘d like to present a product, a service or your company: you will meet the right target audience at dotnet Cologne. We’re offering a broad variety of sponsorship opportunities, ranging from being a donor for the large raffle at the end of the day (software licenses, books, training vouchers, etc.) up to having a booth and/or giving a sponsored talk about your product (not necessarily in German, English is not a problem). Among the various sponsorship levels (bronze/silver/gold/platinum) there’s most likely a package that will suit your needs – and if not, we’re open for suggestions. We’re happy to announce that already at this point in time (with over five months to go) we have a steadily growing list of partners: Microsoft, Intel, IDesign, SubMain, Comma Soft AG, GFU Köln, and EC Software. If you want to become a sponsor for the dotnet Cologne 2011, drop me a line at Roland.Weigelt at dotnet-koelnbonn.de and I’ll send you our sponsor info.

    Read the article

  • How to setup HDMI output on m11x with Nvidia GeForce GT 540M? (Bumblebee) Help?

    - by Alexander Tritan
    I have an Alienware m11x with Optimus Technology. I setup (Fresh Install) Ubuntu 12.04 with bumblebee as below. Please help me set up the HDMI output so that I can connect it to my monitor. $ uname -a Linux ubuntu 3.2.0-24-generic-pae #39-Ubuntu SMP Mon May 21 18:54:21 UTC 2012 i686 i686 i386 GNU/Linux $ lspci | grep -i vga 00:02.0 VGA compatible controller: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller (rev 09) 01:00.0 VGA compatible controller: NVIDIA Corporation GF108 [GeForce GT 540M] (rev a1) $ dpkg --get-selections bumblebee install bumblebee-nvidia install $ bumblebeed -version bumblebeed --version bumblebeed (Bumblebee) 3.0 Copyright (C) 2011 The Bumblebee Project Should xrandr normally show HDMI? $ xrandr -q Screen 0: minimum 320 x 200, current 1366 x 768, maximum 8192 x 8192 LVDS1 connected 1366x768+0+0 (normal left inverted right x axis y axis) 256mm x 144mm 1366x768 60.0*+ 1360x768 59.8 60.0 1024x768 60.0 800x600 60.3 56.2 640x480 59.9 VGA1 disconnected (normal left inverted right x axis y axis) $ cat /etc/X11/xorg.conf Section "ServerLayout" Identifier "Layout0" EndSection Section "Device" Identifier "Device1" Driver "nvidia" VendorName "NVIDIA Corporation" Option "NoLogo" "true" Option "ConnectedMonitor" "DFP" EndSection $ cat /etc/bumblebee/xorg.conf.nvidia Section "ServerLayout" Identifier "Layout0" EndSection Section "Device" Identifier "Device1" Driver "nvidia" VendorName "NVIDIA Corporation" Option "NoLogo" "true" Option "ConnectedMonitor" "DFP" EndSection $ cat /etc/bumblebee/xorg.conf.nouveau Section "ServerLayout" Identifier "Layout0" Screen "Screen0" Option "AutoAddDevices" "true" EndSection Section "Device" Identifier "Device0" Driver "nouveau" EndSection Section "Screen" Identifier "Screen0" Device "Device0" EndSection and finally the biggest config file below: $cat /etc/bumblebee/bumblebee.conf [bumblebeed] VirtualDisplay=:8 KeepUnusedXServer=true ServerGroup=bumblebee TurnCardOffAtExit=false NoEcoModeOverride=false Driver= [optirun] VGLTransport=proxy AllowFallbackToIGC=false PMMethod=none [driver-nvidia] KernelDriver=nvidia-current Module=nvidia PMMethod=none LibraryPath=/usr/lib/nvidia-current:/usr/lib32/nvidia-current XorgModulePath=/usr/lib/nvidia-current/xorg,/usr/lib/xorg/modules XorgConfFile=/etc/bumblebee/xorg.conf.nvidia [driver-nouveau] KernelDriver=nouveau PMMethod=none XorgConfFile=/etc/bumblebee/xorg.conf.nouveau Any ideas on setting up the Optimus to output to the HDMI T.V.? I want to enable my HDMI with my GeForce GT 540M.

    Read the article

  • How to run boot loader in VMWare?

    - by Asim Haroon
    I am using Ubuntu as a virtual machine in VMWare. I have used this code to write a boot loader which would write Hello world on the screen. [BITS 16] [ORG 0x7C00] MOV SI, HelloString CALL PrintString JMP $ PrintCharacter: MOV AH, 0x0E MOV BH, 0x00 MOV BL, 0x07 INT 0x10 RET PrintString: next_character: MOV AL, [SI] INC SI OR AL, AL JZ exit_function CALL PrintCharacter JMP next_character exit_function: RET HelloString db 'Hello World', 0 TIMES 510 - ($ - $$) db 0 DW 0xAA55 I wrote this code in the text editor in Ubuntu and saved the file as Boot.asm Then I compiled the Boot.asm to boot.bin file by using this command nasm -f bin -o boot.bin Boot.asm and it didn't gave me any errors. After that I copied the boot.bin file to my usb and took it to my Windows OS. After this I burned the boot.bin file to boot.img and boot.iso files. Then I created a new virtual machine and named it booter, when it asked for the .iso file of the OS I want to run I gave it the boot.iso file, about which I told above, then I powered on that virtual machine but it gave me this error PXE-M0F: No boot filename received PXE-M0F: Exiting Intel PXE ROM Operating System not found Please tell me what is the main problem and how can I overcome that problem.

    Read the article

  • How do I enable sound with the "linux-virtual" kernel?

    - by Ola Tuvesson
    I've been trying to enable sound for the linux-virtual kernel as I want to run an ultra slim Ubuntu server under VirtualBox but need audio. The resource usage difference between virtual and generic/server is surprisingly large, with the virtual kernel system using 80Mb less RAM after a clean boot (130Mb vs 210Mb), and I really want to squeeze every clock cycle and available byte I can out of the system. Besides, the virtual kernel has some additional optimisations enabled specifically for virtual machines (or so I am told). Now I have compiled my own kernel a few times in the past, for example to include the Intel-PHC module (for improved power management on Thinkpads), so the concept is not entirely alien to me, but I've run into a strange problem which I'm hoping someone can help explain: When I do a diff between the config files for Linux-generic and Linux-virtual there are precious few differences, and certainly none which pertain to sound support; there are really only five or six lines which differ, and they're mainly to do with i/o timing, sleep state and priorities. What gives? I expected the differences to be extensive, and that I would be able to identify the options that enabled audio by looking at them, but my problem doesn't seem to be related to the config file at all (yes, I know about the sound drivers section - it is identical between the two kernel configs). Am I looking in the wrong place? Many thanks!

    Read the article

  • Wireless not detected on an hp Pavilion g6 - RT5390PCIe

    - by Earl Larson
    I just bought an HP Pavilion g6 laptop and I installed Natty Narwhal alongside Windows 7. In Windows 7, my WiFi works perfect but in Ubuntu it absolutely (no matter what I do) won't detect my home WiFi network. Here is the output of "lspci": earl@ubuntu:~$ lspci 00:00.0 Host bridge: Advanced Micro Devices [AMD] RS880 Host Bridge 00:01.0 PCI bridge: Advanced Micro Devices [AMD] RS780/RS880 PCI to PCI bridge (int gfx) 00:04.0 PCI bridge: Advanced Micro Devices [AMD] RS780 PCI to PCI bridge (PCIE port 0) 00:05.0 PCI bridge: Advanced Micro Devices [AMD] RS780 PCI to PCI bridge (PCIE port 1) 00:06.0 PCI bridge: Advanced Micro Devices [AMD] RS780 PCI to PCI bridge (PCIE port 2) 00:11.0 SATA controller: ATI Technologies Inc SB7x0/SB8x0/SB9x0 SATA Controller [AHCI mode] 00:12.0 USB Controller: ATI Technologies Inc SB7x0/SB8x0/SB9x0 USB OHCI0 Controller 00:12.2 USB Controller: ATI Technologies Inc SB7x0/SB8x0/SB9x0 USB EHCI Controller 00:13.0 USB Controller: ATI Technologies Inc SB7x0/SB8x0/SB9x0 USB OHCI0 Controller 00:13.2 USB Controller: ATI Technologies Inc SB7x0/SB8x0/SB9x0 USB EHCI Controller 00:14.0 SMBus: ATI Technologies Inc SBx00 SMBus Controller (rev 42) 00:14.1 IDE interface: ATI Technologies Inc SB7x0/SB8x0/SB9x0 IDE Controller (rev 40) 00:14.2 Audio device: ATI Technologies Inc SBx00 Azalia (Intel HDA) (rev 40) 00:14.3 ISA bridge: ATI Technologies Inc SB7x0/SB8x0/SB9x0 LPC host controller (rev 40) 00:14.4 PCI bridge: ATI Technologies Inc SBx00 PCI to PCI Bridge (rev 40) 00:14.5 USB Controller: ATI Technologies Inc SB7x0/SB8x0/SB9x0 USB OHCI2 Controller 00:16.0 USB Controller: ATI Technologies Inc SB7x0/SB8x0/SB9x0 USB OHCI0 Controller 00:16.2 USB Controller: ATI Technologies Inc SB7x0/SB8x0/SB9x0 USB EHCI Controller 00:18.0 Host bridge: Advanced Micro Devices [AMD] Family 10h Processor HyperTransport Configuration 00:18.1 Host bridge: Advanced Micro Devices [AMD] Family 10h Processor Address Map 00:18.2 Host bridge: Advanced Micro Devices [AMD] Family 10h Processor DRAM Controller 00:18.3 Host bridge: Advanced Micro Devices [AMD] Family 10h Processor Miscellaneous Control 00:18.4 Host bridge: Advanced Micro Devices [AMD] Family 10h Processor Link Control 01:05.0 VGA compatible controller: ATI Technologies Inc M880G [Mobility Radeon HD 4200] 01:05.1 Audio device: ATI Technologies Inc RS880 Audio Device [Radeon HD 4200] 02:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8101E/RTL8102E PCI Express Fast Ethernet controller (rev 05) 03:00.0 Network controller: Ralink corp. Device 5390 04:00.0 Unassigned class [ff00]: Realtek Semiconductor Co., Ltd. Device 5209 (rev 01) earl@ubuntu:~$

    Read the article

< Previous Page | 119 120 121 122 123 124 125 126 127 128 129 130  | Next Page >