Search Results

Search found 4691 results on 188 pages for 'ran biron'.

Page 123/188 | < Previous Page | 119 120 121 122 123 124 125 126 127 128 129 130  | Next Page >

• My desktop has started overheating -- how hot is hot?

  - by Jerry

  I have a two year old desktop, some random quad core HP desktop. It used to run very quietly, but in the past month, the fans start up anytime anything "serious" is being done -- compiles, playing video, etc. Right now, speedfan and speccy report the cores are between 50C and 70C. Speedfan reports this as hot. (Nice flame icon.) Well, the system does sit on my carpet, so two weeks ago, I took off the lid, and cough *cough* it was pretty filled with dust. I got out an air can, turned on a vacuum and carefully got out all the dust that I saw on the CPU fan the case fans any fan I saw (graphics board) and blew out all the dust I could from all the circuit boards. And then I closed the case back up. It has definitely run cooler since then, but it still runs hot, and I hear high speed fan noise I never heard before. How hot is too hot? At what temps do consumer grade CPUs die? What should I be looking to do? Replace CPU fan? (It seems to work) Replace power supply fan? Assuming the dust problem is gone, where should I be looking to determine why the machine is heating up? Epilogue: After following the various pieces of advice given here, the system did run cooler, but it was still noticeably running louder (hotter) than just a few months prior. I ended up purchasing a new cpu heatsink and fan and during installation found the cooling grease from the original heatsink was just a dried, cracked layer, probably more of an insulator than heat transfer agent. With the new fan AND the new heatsink compound, the system ran much much cooler and the fan rarely turns on.

  Read the article

• Nvidia Linux Driver Huge Resolution

  - by darxsys

  I'm trying to setup a working CUDA SDK on my Linux Mint. I'm new to Linux and everything connected with it. So, I tried following some steps on how to install CUDA. Firstly, I downloaded a Linux driver from here: http://developer.nvidia.com/cuda/cuda-downloads version 295.41. After that, I barely found a way to run it. I did it like this: 1. typed in sudo init 1 in terminal and switched to root 2. typed service mdm stop 3. ran the *.run file downloaded from the link above Then it started installing the driver. It gave some warning messages, but I ignored it. After installation, I typed init 5 and it came back to GUI screen, BUT everything is huge. I restarted, still huge. My screen resolution is 640x480 on a 17 inch laptop monitor. I tried running Nvidia X Server Settings, but it says: "You do not appear to be using Nvidia X Driver. Please edit your X configuration file." I tried that. Nothing happened. I cant change the resolution because that Nvidia Settings thing gives no options. Then I googled some things, installing some packages - nothing. The biggest problem is I don't understand whats really going on. My laptop is a Samsung with i7 and Nvidia Gt 650M with optimus. I cant even install bumblebee, but that is something I will try if I manage to get my resolution to default. Please, help!

  Read the article

• 2000 Server, User can't logon

  - by Mike I

  I hope you can help me. I recently upgraded a workstation at my office (to a whole new machine) and ran into a pretty serious problem. Friday until 5:00 PM, I could access my mail on 2000 Exchange server. When I shut the old workstation down and put in the new workstation, I tried to set up an account. When I put the server name in appropriate field and typed my username and hit check names, my username does not come up. So to troubleshoot, (It also is a SMB server) I try to logon to my file share. (My local credentials are the same as server credientials of user account) When I try to logon to share, I just get the Username/Password screen (Never had gotten that before since credentials are the same) Again, in troubleshooting mode, I try to log on to my user from another workstation. Still can't authenticate via my user. Every other user can authenticate and load up their shares/mailboxes. I have restored Exchange from the backup as of 3 days ago (Thursday) but the exact same issue is still there. I really do not understand what is wrong and what else I can do to troubleshoot. If anyone has some pointers for me, I will surely accept them. Thanks, Mike

  Read the article

• Built local glibc, broke system, how do I ssh without parsing the .bashrc?

  - by Mikhail

  The cluster I am on had really old build tools and I needed to use CUDA5. I'm a pretty clever dude and I planned on building the necissary tools. So, I built a local copy of gcc, bintools, and glibc. Everything a CUDA5 could want. All builds finished without error. and I tested gcc and bintools. Everything was wonderful and I built and ran a few of the programs. I set up the LD_LIBRARY_PATHs in the .bashrc and logged back in, expecting a productive night ahead. To my horror I realized that everything is dynamically linked. Now I can't do simple commands like ls [ex@uid377 ~]$ ls ls: error while loading shared libraries: __vdso_time: invalid mode for dlopen(): Invalid argument and I can't do commands to fix the problem like rm or vim! Is there a way for me to ssh but also to ignore .bashrc file? Any suggestions are much appreciated. This machine is obviously under maintained and I don't know when I could have administrator support.

  Read the article

• Running a VM off a USB 2.0 Flash Drive - Mac/Parallels/XP

  - by geerlingguy

  I use a MacBook Air as my primary machine, and the 128GB SSD means space is precious. To save about 10 GB, I've been running Parallels with a Windows XP VM off an external USB hard drive, which performs as well in everyday use as running the VM off the internal SSD. So, I bought a tiny 32GB USB 2.0 flash drive, plugged it into the MacBook Air, formatted it first as ExFAT (which was slow), then as Mac OS Extended (Journaled) (which was also slow), and copied over my VM file, and ran Parallels off it. My full experience is documented here: http://www.midwesternmac.com/blogs/jeff-geerling/running-windows-xp-vm Straight file copies are really fast — 30 MB/sec read (solid the whole time), and 10-11 MB/sec write (solid the whole time). But I noticed that once XP started running, the disk access rates were in the low KB ranges. Are USB flash drives really that poor at random access, or could I possibly be missing something (the format of the flash drive, etc.?)? Of note, I've tried the following, to no great effect: Formatting the drive as either ExFAT or Mac OS Extended (Journaled) Unplugging all other USB devices and turning off Bluetooth (which runs on the right-side-port USB bus). Plugging in the flash drive either direct in the right side port, or the left side port, or into a USB 2.0 hub

  Read the article

• Media Center setup won't complete for watching TV

  - by Robert

  I have a problem watching TV in Media Center. The TV constantly pauses 1/2 second then plays 1 second, pauses 1/2 second, plays 1 second - it is constant and does not vary. This problem occurs on all channels, live or recorded. The bottom 5th of the screen is solid green. I know the problem is Media Center because I can use Pinnacle's TVCenterPro and there is no skipping/pausing (and not green on bottom). I was using cable, and switched to DirecTV (satellite). Trying to do "Set up TV signal" in Media Center seems to be what broke it. I get an error "IR Hardware not detected." I can use the remote to "try again" - so the IR hardware works fine (Media Center's remote/sensor). I tried plugging the IR Blaster into both ports, and I tried a different USB port for the IR receiver. I can't complete the setup. Media Center was playing it okay before I tried to run setup. (I ran setup to try to do recording with Media Center.) Pinnacle PCTV 800i HD PCI card (coax cable from DirecTV tuner), ATI Radeon HD 3200 Graphics, Windows XP SP3 Media Center Edition, AMD Athlon Dual Core 2.5 GHz, 1.75 GB RAM.

  Read the article

• 2008 Sever Randomly reboots.

  - by Jeff

  I'm out of ideas here. We have a 2008 Server that keeps rebooting 2-3 times a day at completely random times with an "Unexpected Shutdown" event. There are no Dumps, no events leading to it just like it loses power then comes back online. I ran a Diagnostic of the power supply and it has had continuous power for months. In addition, the temperature of the processors are maxing out at 40 degrees Celsius. Anyone have any ideas how to figure out why this is restarting all the time? This is a DMZed Web server so it doesn't do too much process wise. Here are the specs: Host Name: ~~~ OS Name: Microsoft Windows Server 2008 R2 Standard OS Version: 6.1.7600 N/A Build 7600 OS Manufacturer: Microsoft Corporation OS Configuration: Standalone Server OS Build Type: Multiprocessor Free Registered Owner: Windows User Registered Organization: Product ID: ~~~ Original Install Date: 5/27/2010, 4:25:47 PM System Boot Time: 2/14/2011, 5:35:01 PM System Manufacturer: HP System Model: ProLiant DL380 G6 System Type: x64-based PC Processor(s): 1 Processor(s) Installed. [01]: Intel64 Family 6 Model 26 Stepping 5 GenuineIntel ~1586 Mhz BIOS Version: HP P62, 8/16/2010 Windows Directory: C:\Windows System Directory: C:\Windows\system32 Boot Device: \Device\HarddiskVolume1 System Locale: en-us;English (United States) Input Locale: en-us;English (United States) Time Zone: (UTC-05:00) Eastern Time (US & Canada) Total Physical Memory: 4,086 MB Available Physical Memory: 2,775 MB Virtual Memory: Max Size: 8,170 MB Virtual Memory: Available: 6,691 MB Virtual Memory: In Use: 1,479 MB Page File Location(s): C:\pagefile.sys

  Read the article

• 8007064c(2011) and 80280007(2009) persistant after all known repairs

  - by tiu44

  I'm on Windows 7 Home x64, and have ran into a major issue with Live Messenger(which I use daily). I have full offline installers for both 2011 and the last Wave 3 2009(14.0.8117.0416) Suites. Both give the following errors: Live Essentials 2011 Offline installer(official): An unknown error occured. Error:0x8007064c Source WLXSuite WL 2009 offline installer(official): You already have a more recent version of Windows Live. Error: OnCatalogResult:0x80280007 Next steps: If you want to install this older version, first uninstall any later versions that are on your computer. Get help with this error The 2011 installer also says it is updating messenger, I don't select anything else. Then last 2009 installer says their is a newer version that needs uninstalled even after the following procedures. MS Help pages provided all basically lead to using uninstall from control panel. Which I've uninstalled all Live components including watcom safety scanner and portable SQL from. I've followed online instructions for manually deleting folders from Program Files(x86), Appdata, and some others under \User\All Users and the one for the one account on the machine. I've used CCcleaner 3.01, ASC 3.7.3 and Beta 4 with deep scan along with deleting folders, and checked their uninstallers for Live components too, and none were there. wlmuninstaller.exe tool reports nothing, but after a failed install it finds something, but failes to clean it under all user admin privilege. The same errors still occur after all of that. Google searching I see people on forums suggesting reinstalling the OS cause MS doesn't even know how to fix this, but I'm hoping someone here can help. NOTE: I don't have System Restore or any other state freeze utilities going, and I don't have any real time AV going(I sometime scan with defender, anti rootkits, and online scanners). NOTE2:I posted this on windowslivehelp.com, before looking to see if the place was active or not, hoping I can get help here. Thanks

  Read the article

• Installing/enabling PHP Pecl Intl extension on CentOs 5

  - by Marijn Huizendveld

  Original question: I'm having trouble installing the PHP Pecl Intl extension on my CentOs 5 machine. After installing both icu and libicu with the following commands: $ yum install icu $ yum install libicu I tried to install the Intl extension like so: $ /usr/bin/pecl install intl I selected to search for the default location for the ICU libraries and header files. It ends up crashing like this: checking whether to enable internationalization support... yes, shared checking for icu-config... no checking for location of ICU headers and libraries... not found configure: error: Unable to detect ICU prefix or no failed. Please verify ICU install prefix and make sure icu-config works. ERROR: `/tmp/pear/temp/intl/configure --with-icu-dir=DEFAULT' failed update After successfully installing the development version of icu as suggested by RusAlex (thanks RusAlex) like so: $ yum install libicu-devel I ran into a new problem which I also encountered locally the following command: $ /usr/bin/pecl install intl now produces this error: /private/tmp/pear/temp/intl/collator/collator_class.c:92: error: duplicate 'static' /private/tmp/pear/temp/intl/collator/collator_class.c:96: error: duplicate 'static' /private/tmp/pear/temp/intl/collator/collator_class.c:101: error: duplicate 'static' /private/tmp/pear/temp/intl/collator/collator_class.c:107: error: duplicate 'static' make: *** [collator/collator_class.lo] Error 1 ERROR: `make' failed It appears to have something to do with PHP 5.3 being bundled with Intl already. But how can I enable this extension, if I look in my PHP Info than I cannot find any reference to it...

  Read the article

• LDAP authentication issue with Kerio Connect

  - by djk

  Hi, We have Kerio Connect (mail server) running on a Windows Server 2003 server on a domain. In the webmail client, users are able to change their domain password. This functionality used to work fine until a user tried to change their password a few days ago, when every password they'd try would result in the webmail client claiming their password was "invalid". I spoke to Kerio about this and they claim that this error is returned by the domain controller, which supports my initial investigations. The error that the DC is logging when an attempt is made to change the password is this: "80090308: LdapErr: DSID-0C090334, comment: AcceptSecurityContext error, data 52e, vece" The "data 52e" part indicates that this is an "invalid credentials" error. I don't see how this can be as I've tried (in the Kerio Connect configuration) various accounts that have privileges to modify accounts, including my own as I am a domain admin. I have ran 'dcdiag' (all tests) on the DC and it came back passing every single one of them. I've searched high and low for an answer to this and came up empty. Does anyone have any idea why this may have suddenly started happening? Thanks! Edit: I should mention that the passwords we are changing to do comply with the complexity policy.

  Read the article

• exFAT to NTFS formatting troubles

  - by user1083734

  I recently ran a chkdsk on 2.5" 230GB SATA HDD but the plug was pulled before the end of the chkdsk and since then it wouldn't boot up. Deciding to scrap all data on the HDD (no longer needed it), I then fitted it into an external HDD caddy and (in diskpart) cleaned the disk, created new partition and volume and tried to format it to NTFS. It couldn't do this on long or short formats and so I went with the less-appreciated alternative - exFAT (I run Win7). It quick formats to exFAT fine but encounters errors during long format. At the moment it is exFAT. Of course I would really like it to be NTFS as I will probably need to use it on Win XP too. Could anyone suggest a method of trying to reformat to NTFS? Do you think that, when chkdsk was interrupted first time, the disk was corrupted and is irretrievable? I find this situation slightly odd, as it HAS formatted to exFAT and DOES seem to work when I copy files across! Also, I CAN use disk management console to create several partitions: e.g. a 50GB partition and then a large 180GB partition. The 50GB and WILL long-format to NTFS but the 180GB will not! I'm thinking hardware fault, but then I notice that it WILL format to exfAT! Much confusion!

  Read the article

• FastCGI and Apache 500 error intermittently

  - by benkorn1

  I have a FastCGI (mod_fastcgi)problem. It happens every once in a while, and does not casue a complete server meltdown, just 500 errors. Here are a couple things. First I am using APC so PHP is in control of it's own processes, not FastCGI. Also, I have the webroot set as: /var/www/html And the fcgi-bin inside: /var/www/html/fcgi-bin First off here is the apache error_log: [Fri Jan 07 10:22:39 2011] [error] [client 50.16.222.82] (4)Interrupted system call: FastCGI: comm with server "/var/www/html/fcgi-bin/php.fcgi" aborted: select() failed, referer: http://www.domain.com/ I also ran strace on the 'fcgi-pm' process. Here is a snip from the trace around the time it bombs out: 21725 gettimeofday({1294420603, 14360}, NULL) = 0 21725 read(14, "C /var/www/html/fcgi-bin/php.fcgi - - 6503 38*", 16384) = 46 21725 alarm(131) = 0 21725 select(15, [14], NULL, NULL, NULL) = 1 (in [14]) 21725 alarm(0) = 131 21725 gettimeofday({1294420603, 96595}, NULL) = 0 21725 read(14, "C /var/www/html/fcgi-bin/php.fcgi - - 6154 23*C /var/www/html/fcgi-bin/php.fcgi - - 6483 28*", 16384) = 92 21725 alarm(131) = 0 21725 select(15, [14], NULL, NULL, NULL) = 1 (in [14]) 21725 alarm(0) = 131 21725 gettimeofday({1294420603, 270744}, NULL) = 0 21725 read(14, "C /var/www/html/fcgi-bin/php.fcgi - - 5741 38*", 16384) = 46 21725 alarm(131) = 0 21725 select(15, [14], NULL, NULL, NULL) = 1 (in [14]) 21725 alarm(0) = 131 21725 gettimeofday({1294420603, 311502}, NULL) = 0 21725 read(14, "C /var/www/html/fcgi-bin/php.fcgi - - 6064 32*", 16384) = 46 21725 alarm(131) = 0 21725 select(15, [14], NULL, NULL, NULL) = 1 (in [14]) 21725 alarm(0) = 131 21725 gettimeofday({1294420603, 365598}, NULL) = 0 21725 read(14, "C /var/www/html/fcgi-bin/php.fcgi - - 6179 33*C /var/www/html/fcgi-bin/php.fcgi - - 5906 59*", 16384) = 92 21725 alarm(131) = 0 21725 select(15, [14], NULL, NULL, NULL) = 1 (in [14]) 21725 alarm(0) = 131 21725 gettimeofday({1294420603, 454405}, NULL) = 0 I noticed that the 'select()' seems to stay the same regardless, however the read() changes its return from 46 to some other number while it is bombing out. Has anyone seen anything like this. Could this be some sort of file locking? Thanks, Ben

  Read the article

• Surprising corruption and never-ending fsck after resizing a filesystem.

  - by Steve Kemp

  System in question has Debian Lenny installed, running a 2.65.27.38 kernel. System has 16Gb memory, and 8x1Tb drives running behind a 3Ware RAID card. The storage is managed via LVM. Short version: Running a KVM guest which had 1.7Tb storage allocated to it. The guest was reaching a full-disk. So we decided to resize the disk that it was running upon We're pretty familiar with LVM, and KVM, so we figured this would be a painless operation: Stop the KVM guest. Extend the size of the LVM partition: "lvextend -L+500Gb ..." Check the filesystem : "e2fsck -f /dev/mapper/..." Resize the filesystem: "resize2fs /dev/mapper/" Start the guest. The guest booted successfully, and running "df" showed the extra space, however a short time later the system decided to remount the filesystem read-only, without any explicit indication of error. Being paranoid we shut the guest down and ran the filesystem check again, given the new size of the filesystem we expected this to take a while, however it has now been running for 24 hours and there is no indication of how long it will take. Using strace I can see the fsck is "doing stuff", similarly running "vmstat 1" I can see that there are a lot of block input/output operations occurring. So now my question is threefold: Has anybody come across a similar situation? Generally we've done this kind of resize in the past with zero issues. What is the most likely cause? (3Ware card shows the RAID arrays of the backing stores as being A-OK, the host system hasn't rebooted and nothing in dmesg looks important/unusual) Ignoring brtfs + ext3 (not mature enough to trust) should we make our larger partitions in a different filesystem in the future to avoid either this corruption (whatever the cause) or reduce the fsck time? xfs seems like the obvious candidate?

  Read the article

• AWS Linux EC2: yum won't run with plugins

  - by Patrick

  Short Version: yum commands on my Amazon Linux EC2 AMI only work with --noplugins. Long Version: A couple of days ago, I ran yum update at the behest of the SSH Login MoTD telling me I had updates to install. About midway through the update (specifically while updating the kernel), the update abruptly ended (79 of 138 items completed). The website I host on EC2 got weird for a few minutes, but eventually seemed to stabilize back out (maybe EC2 restarted itself?), and I didn't have further issues (other than MySQL started running out of memory, but I think that's probably unrelated to this). Today, I went to install gcc-c++ (with yum install gcc-c++). When I did, I got the following message: Loaded plugins: priorities, security, update-motd, upgrade-helper Config error: Command "updateinfo" already defined and I get that for any command I can think to run using yum. However, If I throw in the --noplugins flag, then magically it seems to work. To be clear, when I installed a different package a week ago, it worked totally correctly, so the yum update is the only thing I can think of that changed. I could find nothing on Google with regard to "updateinfo" already defined (with and without quotes). I tried running yum update --noplugins which spit out a message telling me that I should have run yum-complete-transaction instead, but proceeded to try to update something on its own. When that completed, I tried yum-complete-transaction but that gave me a message about the transactions not lining up correctly, so it removed the old transaction (Probably since I should have completed the first transaction before trying to update again, if I had known). Based on the SF question "Linux EC2 Broken Yum", I've also tried yum clean all --noplugins (fails the same with plugins) which just gives me Cleaning repos: amzn-main amzn-updates rpmforge Cleaning up everything I also tried package-cleanup --problems Loaded plugins: priorities, update-motd, upgrade-helper No Problems Found and package-cleanup --dupes Gives a lot of dupes, so I pasted them here: http://pastebin.com/VVFQEkTT instead of inline. At this point, I'm not sure what else there even is to check.

  Read the article

• Devices on one switch can't see devices on another switch

  - by jockey69

  I have RoadRunner Internet cable service hooked to a Motorola Surfboard modem. This is connected to a 10/100 wireless router (located in the garage). Downstairs, I have a ZyXEL GS-108b gigabit switch connected to one port on the router. From this switch I ran connections to a PS3, DVR, Vonage box and a wireless router (Buffalo AirStation 10/100). The Buffalo AirStation works as a wireless AP for other laptops, iPads and cell phones. Upstairs, I have an Asus gigabit switch connected to a gaming desktop, printer, and a media server on FreeNAS (PS3 Media Server on FreeNAS). The router is configured to assign static IPs to both the PS3 and the media server. Problem - I connect a laptop to the switch downstairs after disabling the wireless, thus making sure that I am accessing internet through the wired connection (and the router in the garage). All my computers, iPads and cell phones are able to connect to the internet without a problem. My PS3 connects to the interent with a wired connection but is unable to access the media server (I get a message that no media server is found). I used a wired laptop downstairs (connected to switch downstairs) but am unable to ping either the PS3 or media server! I may be doing something silly but am at my wits' end. Please help!

  Read the article

• Apache 2 Fails to Start After Upgrade with No Errors

  - by Mark Davidson

  Hi all Hoping someone can help me with a server issue. Recently we upgraded to the latest apache on 2 boxes within are organisation. One being the master box the other being for failover. The upgrade went fine on the master box but on the failover box apache fails to start with no errors, being output or logged. Both boxes have the exact same configuration so found this a bit strange. I've reinstalled apache and have been through checking the configs and did not find any obvious errors. Eventally I ran a syntax check on each config file being included and found that one of the files apparently has syntax errors. Invalid command 'Order', perhaps misspelled or defined by a module not included in the server configuration Invalid command 'php_value', perhaps misspelled or defined by a module not included in the server configuration Invalid command 'GeoIPEnable', perhaps misspelled or defined by a module not included in the server configuration I've trippled checked all the modules are enabled but it still fails. I've googled the subject of these errors loads but have been unable to fine a solution. I was wondering if anyone had encountered such a problem before and could point me towards a solution. Thanks for your help in advance. P.s: Apache related versions on server. ii apache2 2.2.3-4+etch10 Next generation, scalable, extendable web se ii apache2-mpm-prefork 2.2.3-4+etch10 Traditional model for Apache HTTPD 2.1 ii apache2-utils 2.2.3-4+etch10 utility programs for webservers ii apache2.2-common 2.2.3-4+etch10 Next generation, scalable, extendable web se ii libapache2-mod-geoip 1.1.8-2 GeoIP support for apache2 ii libapache2-mod-php5 5.2.0+dfsg-8+etch15 server-side, HTML-embedded scripting languag

  Read the article

• permanent NAS-mount in Ubuntu - wrong fs type, bad option, bad superblock

  - by Emil

  My network drive shows up in the file browser, just like my external usb-harddrive. Moving, running and editing files works. Hovering over it shows smb://lacie-2big/nasdisk . BUT, when I want to save a file, the drive doesn't come up as an option. All I can see is my other places, including my usb-harddrive. I am a complete newbie but I am GUESSING that it has something to do with the mount not being a "real" mount but just a shortcut to the smb location. So I ran the tutorial at https://wiki.ubuntu.com/MountWindowsSharesPermanently about how to "mount a network drive permanently". edited my fstab to //LaCie-2big/nasdisk /media/nasmount cifs guest,uid=1000,iocharset=utf8,codepage=unicode,unicode 0 0 and running sudo mount -a gave me the following error: mount: wrong fs type, bad option, bad superblock on //LaCie-2big/nasdisk, missing codepage or helper program, or other error (for several filesystems (e.g. nfs, cifs) you might need a /sbin/mount. helper program) In some cases useful info is found in syslog - try dmesg | tail or so Now thats a very helpful error message, BUT, before I go any further, I'd be really thankful if one of you could tell me if I'm even in the right ballpark, or if my actual need: to be able to download files (ie torrents) directly to the drive, can be possible as it is already. Question: How to fix "wrong fs type, bad option, bad superblock on //LaCie-2big/nasdisk, missing codepage or helper program" when running mount -a

  Read the article

• OpenVPN, install a TAP adapter

  - by GolezTrol

  When I try to connect to my work VPN using OpenVPN, the connection fails with the message: All TAP-Win32 adapters on this system are currently in use. Many sources suggest to look in Control Panel\Network and Internet\Network Connections an enable the TAP adapter, but when I look there, there is none. Now I've run addtap.bat which is provided with OpenVPN, but I still don't get to see any TAP adapter, and logging in in VPN still fails. The output of addtap.bat is C:\Windows\system32>"C:\Program Files (x86)\OpenVPN\bin\tapinstall.exe" install "C:\Program Files (x86)\OpenVPN\driver\OemWin2k.inf" tap0801 Device node created. Install is complete when drivers are updated... Updating drivers for tap0801 from C:\Program Files (x86)\OpenVPN\driver\OemWin2k .inf. Drivers updated successfully. I've Run As Administrator both the setup of OpenVPN and addtap.bat. I've run deltapall.bat to remove any (maybe hidden) adapters. It said it removed three of them, after which I ran addtap.bat again to try to create another one. I also run OpenVPN itself as administrator. What's wrong? Running Windows 7 Home Premium on a HP Pavilion dv7 4050ed. It has worked before, but I recently had to reinstall my laptop, for which I used the restore disks I created when I just got it. Everything else seems to work fine. == UPDATE == The TAP adapter is found in Device Manager, but apparently it is disabled because it is incompatible with Windows 7 64bit. I've deïnstalled OpenVPNGui, downloaded a version that should be 64bit compatible, and installed that. Still no cigar. Then I found a tip to install OpenVPN (version 9) after installing OpenVPNGui, because that installs OpenVPN version 8. Now I got a v9 TAP driver in Device Manager, but it still doesn't work and shows up in device manager with an exclamation mark, and not at all in my network devices.

  Read the article

• Sluggish Windows SBS 2003

  - by TomWilsonFL

  One of my customers has a Windows 2003 Small Business Server which at this point is basically the DC, DNS, Fileserver and Symantec Protection Manager. I have disabled Exchange because I moved their mail to Google Apps. The server is extremely sluggish when doing anything. It is most noticeable when a dialog box is open (say the System properties), and you try to change tabs. This is usually instant, but on this machine can take 3-5 seconds. What additional services / packages can I uninstall from this machine knowing that it is only performing the above roles? Will removing the "Small Business Server" package in Add / Remove Programs get rid of a few unnecessary things? Any other thoughts? P.S. I know Symantec Endpoint and the Protection Manager are hogs, but I have nothing to replace the solution with at the moment. Thanks, Tom UPDATE: I looked over the different performance metrics, but nothing stood out as a problem. One of my friends mentioned Symantec's log and temp files can get quite huge and slow things down, so I ran CCleaner on the machine and found close to 3 GB of Symantec "stuff." Removed that and now the machine is MUCH better. I am still unsure why the data just sitting there would cause such a slowdown. The drive is not even near full. The only thing I can imagine is that Symantec must have to run through this stuff now and then.

  Read the article

• Changes to grub in ubuntu 10

  - by jdege

  I've been running CentOS 5 for some years. I've decided to upgrade to Ubuntu, and with 10.04 just out, this seemed like a good time. I'm a tad paranoid, so I started off with a new set of drives - one to install on, one to backup to, and one as a spare. I removed my existing CentOS 5 drives, and did an install, and had no problems. I installed the server version, and used the default full-disk LVM installation. Next, I copies my backup scripts over, edited them to work with the new configuration, and did a test backup. That worked fine, as well. Then comes the real test, could I do an install of the backup onto the spare drive? (I won't put anything of importance on a system that doesn't have a reliable backup, and if I've never done a restore, it's not reliable.) I booted from a System Rescue CD (ver 1.5.3), with the spare drive as /dev/sda, and the backup drive as /dev/sdb. I had no trouble in partitioning, configuring LVM, formatting, making swap, or restoring the file systems. But when I got to restoring grub to the MBR, I ran into problems. My restore instructions from CentOS 5 said run grub, then enter two commands: root (hd0,0) setup (hd0) The first command exits with an error: "Checking if /boot/grub/stage1 exists ... no" I did some googling around, and found that the Grub2 included in recent Ubuntus is very different than the Grub 0.97 included in CentOS 5. One site suggested I use: grub-install --root-dir=/mnt/restore /dev/sda That appeared to work, but when I booted from the drive, I ended up at a grub prompt. Any ideas as to what I need to do? It seems like a simple problem, but my attempts at searching out answers on the web are being swamped by references to the old version of Grub. Help would be appreciated.

  Read the article

• Error when starting qpidd as a service

  - by Sparks

  I have recently swapped from CENTOS 5 to FEDORA 17. Previously I have created my own init.d scripts successfully (albeit not for qpidd) however, in FEDORA I cannot get it to work. I have created the following script (called qpidd) in the init.d directory: #!/bin/bash # # /etc/rc.d/init.d/qpidd # # QPID/AMQP Broker scripts # # # chkconfig: 2345 20 80 # description: QPID/AMQP Broker service # processname: qpidd # pidfile: /var/lock/subsys/qpidd # Source function library. . /etc/init.d/functions SERVICENAME=qpidd start() { echo -n "Starting $SERVICENAME: " daemon qpidd -d & retval=$? touch /var/lock/subsys/$SERVICENAME return $retval } stop() { echo -n "Shutting down $SERVICENAME: " qpidd -q & retval=$? rm -f /var/lock/subsys/$SERVICENAME return $retval } case "$1" in start) start ;; stop) stop ;; status) status qpidd ;; restart) stop start ;; condrestart) [ -f /var/lock/subsys/<service> ] && restart || : ;; *) echo "Usage: $SERVICENAME {start|stop|status|restart" exit 1 ;; esac exit $? After this, I ran chkconfig --add qpidd, however, now when I run sudo service qpidd start I get the following message: Starting qpidd (via systemctl): Job failed. See system journal and 'systemctl status' for details. If I then run systemctl status qpidd I get the following message: Failed to issue method call: Unit name qpidd is not valid. I am now lost, I have search the web and Stack Overflow but cannot find anybody with similar problem, any help or direction to a website that can help would be much appreciated Sparks :)

  Read the article

• Robocopy silently missing files

  - by John Hunt

  I'm using Robocopy to sync data from our server's hard disk to an external disk as a backup. It's a pretty simple solution but pretty much the best/easiest one we could come up with - we use two external disks and rotate them offsite. Anyway, here's the script (with the comments taken out) that I'm using to do it. It works very well, it's quick and almost 100% complete - however it's acting pretty strange with a few files (note company name has been changed in paths to protect the innocent): @ECHO OFF set DATESTAMP=%DATE:~10,4%/%DATE:~4,2%/%DATE:~7,2% %TIME:~0,2%:%TIME:~3,2%:%TIME:~6,2% SET prefix="E:\backup_log-" SET source_dir="M:\Company Names Data\Working Folder\_ADMIN_BACKUP_FILES\COMPA AANY Business Folder_Backup_040407\COMPANY_sales order register\BACKUP CLIENT FOLDERS & CURRENT JOBS pre 270404\CLIENT SALES ORDER REGISTER" SET dest_dir="E:\dest" SET log_fname=%prefix%%date:~-4,4%%date:~-10,2%%date:~-7,2%.log SET what_to_copy=/COPY:DAT /MIR SET options=/R:0 /W:0 /LOG+:%log_fname% /NFL /NDL ROBOCOPY %source_dir% %dest_dir% %what_to_copy% %options% set DATESTAMP=%DATE:~10,4%/%DATE:~4,2%/%DATE:~7,2% %TIME:~0,2%:%TIME:~3,2%:%TIME:~6,2% cscript msg.vbs "Backup completed at %DATESTAMP% - Logs can be found on the E: drive." :END Normally the source would just be M:\Comapany name data\ but I altered the script a bit to test the problem. The following files in the source are not copied to the dest: Someclient\SONICP~1.DOC Someclient\SONICP~2.DOC Someclient\SONICP~3.DOC However, files in the same directory named: TIMESH~1.XLS TIMESH~2.XLS are copied. I'm able to open the files that aren't copied with no trouble at all, and they certainly weren't opened when I ran robocopy so it's not a locking issue. Robocopy is running as administrator so it's not a permissions issue. There's no trace these files were even attempted to be copied as there are no errors being output in the log or in my command prompt. Does anyone have any suggestions as to what this might be? Busted hard disk? Cheers, John.

  Read the article

• Silent install FirePro v4900 Driver on Windows Embedded 7 Standard

  - by Birgit_B

  I'm trying to install the Drivers for a FirePro v4900 on a Windows Embedded 7 Standard 64bit OS. I want the system to be as small as possible, so i would rather not install the whole catalyst control center, but only the necessary drivers. Because the installation should be accomplished absolutely unattended, the installation process of the FirePro-Driver should also be done without any user interaction. I see two possible solutions for the Problem: Install only the Drivers: Is it possible to solely install the necessary drivers? How would i achieve that? This solution would be the preferred one, because of the smaller footprint. Silent custom install the provided "FirePro_8.911.3.3_VistaWin7_X32X64_135673.exe" (found at ATI FirePro™ Driver). Is there a way, to do that? Thank you in advance for your support! Update: I managed to accomplish a silent installation. I extracted the contents of the above mention installer-file and ran \$_OUTDIR\Bin64\Setup.exe -Install. (There are some other Parameters, just run Setup.exe /?). But i couldn't achieve to just install the drivers without the Cataclyst Control Center, and it seams the Control Center has some unfulfilled dependencies and so it crashes...

  Read the article

• Alias using Nginx causing phpMyAdmin login endless loop

  - by Seb Dangerfield

  Recently I've been trying to set up a web server using Nginx (I normally use Apache). However I've ran into a problem trying to set phpMyAdmin up on an alias. The alias correctly takes you too the phpMyAdmin login screen, however when you enter valid credentials and hit go you end up back on the login screen with no errors. Sounded like a cookie or session problem to me... but if I symlink the phpMyAdmin directory and try logging in through the symlinked version it works fine! Both the symlink and the alias one set the same number of cookies and both set seem to set the cookies for the correct domain and path. My Nginx config for the php alias is as follows: location ~ ^/phpmyadmin/(.*\.php)$ { alias /usr/share/phpMyAdmin/$1; fastcgi_pass 127.0.0.1:9000; fastcgi_index index.php; include fastcgi_params; fastcgi_param SCRIPT_FILENAME $request_filename; } I'm running Nginx 0.8.53 PHP 5.3.3 MySQL 5.1.47 phpMyAdmin 3.3.9 - self install And php-mcrypt is installed. Has anyone else experienced this behaviour before? Anyone have any ideas about how to fix it?

  Read the article

• How do I restart a Windows XP upgrade?

  - by Jason

  Is there a registry tweek to tell Windows Setup to start over? It tries to continue where it left off after I reboot. I can get to the Recovery Console. I tried to go from SP2-SP3. It failed, and I couldn't get to Safe Mode. I put in the SP1 disk (I don't have an SP2 boot disk, just the upgrade package.) It ran a couple minutes then gave me the error "the signature for windows xp professional upgrade is invalid" error code 800b0100. I rebooted to Safe Mode. I get to Safe Mode then say "Window XP Setup can't run under Safe Mode" press ok to restart. I put the SP3 disk back in, trying to get the "repair" option I didn't ever see putting in the SP1 disk, and it tried to continue the SP1 install - on the 4th step, and then gave the same signature error above. I need to get it to start over, so I can get to the repair option, to go back to SP2 (or install SP1 then add SP2 to it). Is there a registry tweek to tell Windows Setup to start over?

  Read the article

< Previous Page | 119 120 121 122 123 124 125 126 127 128 129 130  | Next Page >