Search Results

Search found 6517 results on 261 pages for 'reverse dns'.

Page 123/261 | < Previous Page | 119 120 121 122 123 124 125 126 127 128 129 130  | Next Page >

  • Windows periodically disconnects, reconnects to the network

    - by einpoklum
    My setup: I have a PC with a Gigabyte GA-MA78S2H motherboard (Realtek Gigabit wired Ethernet on-board). I have the latest drivers (at least the latest driver for the NIC. I'm connecting via an Edimax BR-6216Mg (again, wired connection). For some reason I experience short periodic disconnects and reconnects. Specifically, Skype disconnects, tries to connect, succeeds after a short while; incoming SFTP sessions get dropped; using a browser, I sometime get stuck in the DNS lookup or connection to the website and a page won't load. A couple of seconds later, a reload works. All this happens with Windows XP SP3. With Windows 7, it also happens. (When I initially wrote this question I didn't notice it.) ipconfig for my adapter: Ethernet adapter Local Area Connection: Connection-specific DNS Suffix . : Description . . . . . . . . . . . : Realtek PCIe GBE Family Controller Physical Address. . . . . . . . . : 00-1D-7D-E9-72-9E Dhcp Enabled. . . . . . . . . . . : Yes Autoconfiguration Enabled . . . . : Yes IP Address. . . . . . . . . . . . : 192.168.0.2 Subnet Mask . . . . . . . . . . . : 255.255.255.0 Default Gateway . . . . . . . . . : 192.168.0.254 DHCP Server . . . . . . . . . . . : 192.168.0.254 DNS Servers . . . . . . . . . . . : 192.117.235.235 62.219.186.7 Lease Obtained. . . . . . . . . . : Saturday, March 10, 2012 8:28:20 AM Lease Expires . . . . . . . . . . : Friday, January 26, 1906 2:00:04 AM A result of some tests a couple of the disconnects: C:\Documents and Settings\eyalroz.BAKNUNIN>nslookup google.com DNS request timed out. timeout was 2 seconds. *** Can't find server name for address 192.117.235.235: Timed out DNS request timed out. timeout was 2 seconds. *** Can't find server name for address 62.219.186.7: Timed out *** Default servers are not available Server: UnKnown Address: 192.117.235.235 DNS request timed out. timeout was 2 seconds. DNS request timed out. timeout was 2 seconds. *** Request to UnKnown timed-out C:\Documents and Settings\eyalroz.BAKNUNIN>ping 194.90.1.5 Pinging 194.90.1.5 with 32 bytes of data: Control-C ^C C:\Documents and Settings\eyalroz.BAKNUNIN>tracert -d 194.90.1.5 Tracing route to 194.90.1.5 over a maximum of 30 hops 1 <1 ms <1 ms <1 ms 192.168.0.254 2 * * 11 ms 10.168.128.1 3 14 ms 13 ms 14 ms 212.179.160.142 4 * * * Request timed out. 5 * * * Request timed out. 6 * * 47 ms 62.219.189.169 7 31 ms 27 ms 32 ms 62.219.189.150 8 15 ms 14 ms 16 ms 192.114.65.202 9 15 ms 15 ms 11 ms 212.143.10.66 10 13 ms 29 ms 31 ms 212.143.12.234 11 35 ms 15 ms 18 ms 212.143.8.72 12 22 ms 22 ms 16 ms 194.90.1.5 I usually ping 194.90.1.5 (which is not at my ISP) with 15ms response time and no losses. Things I've done/tried: [2012-03-26] I replaced the cable; I thought that made a difference, but the disconnects were back a while later, so that wasn't it. Updated the NIC driver. Tried reducing the MTU (used a utility called Dr. TCP); there was no effect. I updated my board BIOS revision (which caused all the HW to be "reinstalled" or re-identified - successfully). I installed another NIC, and tried switching to it - same effect with the on-board NIC. A while back I tried another router (although it was an Edimax model) - same problem. Connected the computer directly, with no router. Same problem. ping -t to the router (192.168.0.254) gives pongs, nothing is lost, and time is < 1 ms almost always (sometimes it says 1 or 2 ms). This is the case also during the disconnects.

    Read the article

  • Create tunnel through an open SSH connection?

    - by criptych
    I have a remote PC (behind NAT and firewall) set up to create a reverse SSH tunnel to my home PC/server (DMZed). Unfortunately, the tunnel hasn't been working lately. Fortunately -- I think -- the remote PC currently has an SFTP session open to the local one. My question is, can I create a tunnel back to the remote PC through that session? Or am I SOL until I can physically get in to restore the reverse tunnel on the remote PC?

    Read the article

  • How do I resize tables in Visio 2010?

    - by Thomas
    Create a Database Model Diagram Reverse Engineer a database (Database Tab, Reverse Engineer). Once the diagram is created, how do you resize the tables? I've tried: Enable Developer mode, Choose Protection, Choose None. When I do that, I'm given the impression that I should be able to resize a given table but I cannot actually do it. Enable Developer mode, right-click on a table, Choose Show ShapeSheet, Set all Lock values in the Protection section to 0.

    Read the article

  • Accessing a persistent ssh tunnel

    - by woowaa
    How do I pass commands (shell) to a persistent SSH tunnel rather than open a connection for every instance? I have a Python scraper running on a client server which passes URL variables and shell commands to a remote host via a reverse tunnel (forwarded port), so that the URL's are then executed on the host (python fabric ssh localhost:12345 'browser open URL'). I could make the reverse tunnel persistent but how do I echo the url/command to the session? Update - ControlMaster (built into SSH) solves this one.

    Read the article

  • How to best configure IIS7 logging to capture "HTTP_X_FORWARDED_FOR" header

    - by zeroasterisk
    We have IIS7 servers sitting behind an nginx reverse proxy. The reverse proxy is sending the standard "HTTP_X_FORWARDED_FOR" header with the visitor IP address, but IIS7 logging is only logging the IP address of the nginx server (which makes sense, but it's not what I want). How can I tell IIS7 to instead log the "HTTP_X_FORWARDED_FOR" header (or additionally log it)? (note: I'm a linux admin, not a windows one, so explicit instructions & links are sincerely appreciated)

    Read the article

  • Can I have both apache and nginx serve my websites?

    - by Marconi
    I have an existing apache serving a couple of sites. Now I have a new django site that's ajax intensive and so I'm planning to run it on apache's mod_wsgi but I'll use nginx as a reverse proxy. Is it possible to have nginx be a reverse proxy to this new django site while make apache serve the other sites directly without using nginx? Also if you can give me a rough setup on how I might do it if its possible.

    Read the article

  • DKIM, SPF, PTR records are not working properly with my domain

    - by shihon
    I configured my server and well authenticate email system with DKIM key, SPF record and PTR records, when i start to sent out mails from phplist interface to my users ~50000, my domain is spammed by google. In headers, signed by and mailed by tag shows by my domain : appmail.co, I also test my domain via check mail provide by port25, report is: This message is an automatic response from Port25's authentication verifier service at verifier.port25.com. The service allows email senders to perform a simple check of various sender authentication mechanisms. It is provided free of charge, in the hope that it is useful to the email community. While it is not officially supported, we welcome any feedback you may have at . Thank you for using the verifier, The Port25 Solutions, Inc. team ========================================================== Summary of Results SPF check: pass DomainKeys check: neutral DKIM check: pass Sender-ID check: pass SpamAssassin check: ham ========================================================== Details: HELO hostname: app.appmail.co Source IP: 108.179.192.148 mail-from: [email protected] SPF check details: Result: pass ID(s) verified: [email protected] DNS record(s): appmail.co. SPF (no records) appmail.co. 14400 IN TXT "v=spf1 +a +mx +ip4:108.179.192.148 ?all" appmail.co. 14400 IN A 108.179.192.148 DomainKeys check details: Result: neutral (message not signed) ID(s) verified: [email protected] DNS record(s): DKIM check details: Result: pass (matches From: [email protected]) ID(s) verified: header.d=appmail.co Canonicalized Headers: content-type:multipart/alternative;'20'boundary=047d7b2eda75d8544d04c17b6841'0D''0A' to:[email protected]'0D''0A' from:shashank'20'sharma'20'<[email protected]>'0D''0A' subject:Test'0D''0A' message-id:<CADnDhbH9aDBk3Ho2-CrG7gwOoD6RNX0sFq4bWL64+kmo=9HjWg@mail.gmail.com>'0D''0A' date:Sat,'20'2'20'Jun'20'2012'20'16:44:50'20'+0530'0D''0A' mime-version:1.0'0D''0A' dkim-signature:v=1;'20'a=rsa-sha256;'20'q=dns/txt;'20'c=relaxed/relaxed;'20'd=appmail.co;'20's=default;'20'h=Content-Type:To:From:Subject:Message-ID:Date:MIME-Version;'20'bh=GS6uwlT+weKcrrLJ2I+cjBtWPq9nvhwRlNAJebOiQOk=;'20'b=; Canonicalized Body: --047d7b2eda75d8544d04c17b6841'0D''0A' Content-Type:'20'text/plain;'20'charset=UTF-8'0D''0A' '0D''0A' Hello'20'Senders'0D''0A' '0D''0A' --047d7b2eda75d8544d04c17b6841'0D''0A' Content-Type:'20'text/html;'20'charset=UTF-8'0D''0A' '0D''0A' Hello'20'Senders'0D''0A' '0D''0A' --047d7b2eda75d8544d04c17b6841--'0D''0A' DNS record(s): default._domainkey.appmail.co. 14400 IN TXT "v=DKIM1; k=rsa; p=MHwwDQYJKoZIhvcNAQEBBQADawAwaAJhALGCOdMeZRxRHoatH7/KCvI1CKS0wOOsTAq0LLgPsOpMolifpVQDKOWT2zq/6LHVmDVjXLbnWO2d4ry/riy7ei66pLpnAV5ceIUSjBRusI8jcF9CZhPrh/OImsKVUb9ceQIDAQAB;" NOTE: DKIM checking has been performed based on the latest DKIM specs (RFC 4871 or draft-ietf-dkim-base-10) and verification may fail for older versions. If you are using Port25's PowerMTA, you need to use version 3.2r11 or later to get a compatible version of DKIM. Sender-ID check details: Result: pass ID(s) verified: [email protected] DNS record(s): appmail.co. SPF (no records) appmail.co. 14400 IN TXT "v=spf1 +a +mx +ip4:108.179.192.148 ?all" appmail.co. 14400 IN A 108.179.192.148 SpamAssassin check details: SpamAssassin v3.3.1 (2010-03-16) Result: ham (-0.1 points, 5.0 required) pts rule name description ---- ---------------------- -------------------------------------------------- -0.0 T_RP_MATCHES_RCVD Envelope sender domain matches handover relay domain 0.0 HTML_MESSAGE BODY: HTML included in message -0.5 BAYES_05 BODY: Bayes spam probability is 1 to 5% [score: 0.0288] -0.1 DKIM_VALID_AU Message has a valid DKIM or DK signature from author's domain 0.1 DKIM_SIGNED Message has a DKIM or DK signature, not necessarily valid -0.1 DKIM_VALID Message has at least one valid DKIM or DK signature 0.5 SINGLE_HEADER_1K A single header contains 1K-2K characters ========================================================== Original Email Return-Path: <[email protected]> Received: from app.appmail.co (108.179.192.148) by verifier.port25.com id hp7qqo11u9cc for <[email protected]>; Sat, 2 Jun 2012 07:14:52 -0400 (envelope-from <[email protected]>) Authentication-Results: verifier.port25.com; spf=pass [email protected] Authentication-Results: verifier.port25.com; domainkeys=neutral (message not signed) [email protected] Authentication-Results: verifier.port25.com; dkim=pass (matches From: [email protected]) header.d=appmail.co Authentication-Results: verifier.port25.com; sender-id=pass [email protected] DKIM-Signature: v=1; a=rsa-sha256; q=dns/txt; c=relaxed/relaxed; d=appmail.co; s=default; h=Content-Type:To:From:Subject:Message-ID:Date:MIME-Version; bh=GS6uwlT+weKcrrLJ2I+cjBtWPq9nvhwRlNAJebOiQOk=;b=pNw3UQNMoNyZ2Ujv8omHGodKVu/55S8YdBEsA5TbRciga/H7f+5noiKvo60vU6oXYyzVKeozFHDoOEMV6m5UTgkdBefogl+9cUIbt5CSrTWA97D7tGS97JblTDXApbZH; Received: from mail-pb0-f46.google.com ([209.85.160.46]:57831) by app.appmail.co with esmtpa (Exim 4.77) (envelope-from <[email protected]>) id 1SamIF-00055f-Om for [email protected]; Sat, 02 Jun 2012 16:44:51 +0530 Received: by pbbrp8 with SMTP id rp8so4165728pbb.5 for <[email protected]>; Sat, 02 Jun 2012 04:14:51 -0700 (PDT) MIME-Version: 1.0 Received: by 10.68.216.33 with SMTP id on1mr19414885pbc.105.1338635690988; Sat, 02 Jun 2012 04:14:50 -0700 (PDT) Received: by 10.143.66.13 with HTTP; Sat, 2 Jun 2012 04:14:50 -0700 (PDT) Date: Sat, 2 Jun 2012 16:44:50 +0530 Message-ID: <CADnDhbH9aDBk3Ho2-CrG7gwOoD6RNX0sFq4bWL64+kmo=9HjWg@mail.gmail.com> Subject: Test From: shashank sharma <[email protected]> To: [email protected] Content-Type: multipart/alternative; boundary=047d7b2eda75d8544d04c17b6841 X-AntiAbuse: This header was added to track abuse, please include it with any abuse report X-AntiAbuse: Primary Hostname - app.appmail.co X-AntiAbuse: Original Domain - verifier.port25.com X-AntiAbuse: Originator/Caller UID/GID - [47 12] / [47 12] X-AntiAbuse: Sender Address Domain - appmail.co --047d7b2eda75d8544d04c17b6841 Content-Type: text/plain; charset=UTF-8 Hello Senders --047d7b2eda75d8544d04c17b6841 Content-Type: text/html; charset=UTF-8 Hello Senders --047d7b2eda75d8544d04c17b6841-- I also tried to send mail on yahoo , rediff but i get mails in spam. Please help me to sort out this issue

    Read the article

  • Connect to internet through DC with 2 network interfaces

    - by Ali Foroughi
    I have a network like this : Client 1 <== Wireless ==> Access Point <== Wire ==> DC <== Wireless ==> ADSL Modem Client 1 : IP : 192.168.1.181 DG : 192.168.1.100 DNS : 192.168.1.100 Access Point : IP : 192.168.1.10 DG : 192.168.1.100 DC : IP : 192.168.1.100 DG : 192.168.1.1 DNS : 127.0.0.1 ADSL Modem : IP : 192.168.1.1 I can ping yahoo.com from client1, but cannot browse the internet. UPDATE1 : my DC has two network interfaces that I bridge together. UPDATE2 : I powered down the DC firewall UPDATE3 : I set a forwarder for my DC to 8.8.8.8 (Google dns)

    Read the article

  • How can I selectively increase latency? E.g. throttle games

    - by Arcymag
    Basically, I want networked games to run poorly on a network, but I want everything else to run smoothly. I would also appreciate advice on blocking games in general. As far as I can tell, there's a few ways to completely prevent an internet game from running: Blocking entirely via DNS configuration (e.g. hosts file), or router DNS configuration Blocking entirely via a separate DNS server Blocking the application, by uninstalling or some kind of access control Blocking the application by automatically killing the process every once in a while Blocking the application by corrupting files periodically However, I would like a more subtle way to block a program. Something that either: Increases latency (would this be doable through some kind of QoS like what DD-WRT offers?) Increases latency by using a special routing configuration for specific target IPs Throttle other systems resources, such as memory, IO, or CPU Screw around with keyboard configurations when a game is launched I would like this to work on MacOSX and Windows, but Linux would be great too. FYI I don't have a kid, but I was brainstorming with some friends and parents.

    Read the article

  • Problems installing LYNC on non-domain controler

    - by Trikks
    I have two servers in this set up. AD and EX, the domain is called mydomain.net The AD is a Windows 2008 Server (32 bit) with Active Directory installed AD only has it's own ip in the DNS-servers list AD.mydomain.net does resolve correctly in the dns EX is a Windows 2008 R2 that is connected to the mydomain.net-domain EX only DNS server is the ip of the ad.mydomain.net There are no firewalls running between the two servers When trying to install Lync 2010 on the EX server I get the following error "Not available :Failure occurred attempting to check the schema state.Please ensure Active Directory is reachable." I can control the AD from EX, also login to it and do successful checks like netdom query /domain:mydomain.net fsmo ...that resolves correctly I suspect there is something fundamentally wrong with my setup, maybe Lync need a 2k8 R2 ad?

    Read the article

  • Specific IP routing for VPN

    - by Roy
    Is there a way that I can prevent an entire subnet from using internal routing. The VPN server is supposed to be a way to access the company's intranet websites for some people, while for others it is supposed to do routing to the outside only and therefore not having access to any internal websites. The VPN server has a DNS on the actual server but not all should be using this DNS. Some of the users should be directly sent out of the server to the internet. Example: 10.0.0.1 is the DNS on the server, gateway for the VPN 10.0.0.2 is a user (A) on the VPN having access to the intranet websites (subnet is 10.0.0.0/25) 10.0.0.192 is a user (B) only needing routing and no access to intranet websites (subnet is 10.0.0.192/26) All traffic of user B should be directly rerouted out of the server. I have tried several iptables but without success.

    Read the article

  • Routing a PPTP client and VMware Server instance running on the same box

    - by servermanfail
    I have a Windows 2003 SBS box. It has 2 physical NIC's: WAN and LAN. The WAN is a public IP. The LAN is a simple 192.168.2.x subnet with Microsoft DHCP Server. Microsoft Routing and Remote Access Service is used to provide NAT to LAN. The box also runs VMware Server with a virtual machine running Windows XP. I want people to be able to VPN into the box, and connect to these virtual machines on the MSRDP port. I can VPN (PPTP) into the 2003 SBS box fine, as well as ping other machines on the LAN. I can ping the VM from a physical workstation on the LAN and vice-versa. I can ping the VPN client from the a physical workstation on the LAN and vice-versa. I can ping the VPN client from the Server console and vice-versa. I can ping the VM client from the Server console and vice-versa. But I cannot ping the VPN client from the VM and vice-versa. I was hoping to set up 2 or 3 Windows XP virtual machines on our only server, so that a couple of people can remote in to work without having to leave a physical machine on in the office. You could this attempted set up a "poor mans terminal server". On the 2003 SBS Server:- C:\Documents and Settings\Administrator>route print IPv4 Route Table =========================================================================== Interface List 0x1 ........................... MS TCP Loopback interface 0x2 ...00 50 56 c0 00 08 ...... VMware Virtual Ethernet Adapter for VMnet8 0x3 ...00 50 56 c0 00 01 ...... VMware Virtual Ethernet Adapter for VMnet1 0x10004 ...00 53 45 00 00 00 ...... WAN (PPP/SLIP) Interface 0x10005 ...00 11 43 d4 69 13 ...... Broadcom NetXtreme Gigabit Ethernet 0x10006 ...00 11 43 d4 69 14 ...... Broadcom NetXtreme Gigabit Ethernet #2 =========================================================================== =========================================================================== Active Routes: Network Destination Netmask Gateway Interface Metric 0.0.0.0 0.0.0.0 81.123.144.22 81.123.144.21 1 81.123.144.20 255.255.255.252 81.123.144.21 81.123.144.21 1 81.123.144.21 255.255.255.255 127.0.0.1 127.0.0.1 1 81.255.255.255 255.255.255.255 81.123.144.21 81.123.144.21 1 86.135.78.235 255.255.255.255 81.123.144.22 81.123.144.21 1 109.152.62.236 255.255.255.255 81.123.144.22 81.123.144.21 1 127.0.0.0 255.0.0.0 127.0.0.1 127.0.0.1 1 192.168.2.0 255.255.255.0 192.168.2.3 192.168.2.3 1 192.168.2.3 255.255.255.255 127.0.0.1 127.0.0.1 1 192.168.2.26 255.255.255.255 192.168.2.32 192.168.2.32 1 192.168.2.28 255.255.255.255 192.168.2.32 192.168.2.32 1 192.168.2.32 255.255.255.255 127.0.0.1 127.0.0.1 50 192.168.2.50 255.255.255.255 127.0.0.1 127.0.0.1 1 192.168.2.255 255.255.255.255 192.168.2.3 192.168.2.3 1 192.168.10.0 255.255.255.0 192.168.10.1 192.168.10.1 20 192.168.10.1 255.255.255.255 127.0.0.1 127.0.0.1 20 192.168.10.255 255.255.255.255 192.168.10.1 192.168.10.1 20 192.168.96.0 255.255.255.0 192.168.96.1 192.168.96.1 20 192.168.96.1 255.255.255.255 127.0.0.1 127.0.0.1 20 192.168.96.255 255.255.255.255 192.168.96.1 192.168.96.1 20 224.0.0.0 240.0.0.0 81.123.144.21 81.123.144.21 1 224.0.0.0 240.0.0.0 192.168.2.3 192.168.2.3 1 224.0.0.0 240.0.0.0 192.168.10.1 192.168.10.1 20 224.0.0.0 240.0.0.0 192.168.96.1 192.168.96.1 20 255.255.255.255 255.255.255.255 81.123.144.21 81.123.144.21 1 255.255.255.255 255.255.255.255 192.168.2.3 192.168.2.3 1 255.255.255.255 255.255.255.255 192.168.10.1 192.168.10.1 1 255.255.255.255 255.255.255.255 192.168.96.1 192.168.96.1 1 Default Gateway: 81.123.144.22 =========================================================================== Persistent Routes: None C:\Documents and Settings\Administrator>ipconfig /all Windows IP Configuration Host Name . . . . . . . . . . . . : 2003server Primary Dns Suffix . . . . . . . : mycompany.local Node Type . . . . . . . . . . . . : Unknown IP Routing Enabled. . . . . . . . : Yes WINS Proxy Enabled. . . . . . . . : Yes DNS Suffix Search List. . . . . . : mycompany.local gateway.2wire.net Ethernet adapter VMware Network Adapter VMnet8: Connection-specific DNS Suffix . : Description . . . . . . . . . . . : VMware Virtual Ethernet Adapter for VMnet 8 Physical Address. . . . . . . . . : 00-50-56-C0-00-08 DHCP Enabled. . . . . . . . . . . : No IP Address. . . . . . . . . . . . : 192.168.10.1 Subnet Mask . . . . . . . . . . . : 255.255.255.0 Default Gateway . . . . . . . . . : Ethernet adapter VMware Network Adapter VMnet1: Connection-specific DNS Suffix . : Description . . . . . . . . . . . : VMware Virtual Ethernet Adapter for VMnet 1 Physical Address. . . . . . . . . : 00-50-56-C0-00-01 DHCP Enabled. . . . . . . . . . . : No IP Address. . . . . . . . . . . . : 192.168.96.1 Subnet Mask . . . . . . . . . . . : 255.255.255.0 Default Gateway . . . . . . . . . : PPP adapter RAS Server (Dial In) Interface: Connection-specific DNS Suffix . : Description . . . . . . . . . . . : WAN (PPP/SLIP) Interface Physical Address. . . . . . . . . : 00-53-45-00-00-00 DHCP Enabled. . . . . . . . . . . : No IP Address. . . . . . . . . . . . : 192.168.2.32 Subnet Mask . . . . . . . . . . . : 255.255.255.255 Default Gateway . . . . . . . . . : NetBIOS over Tcpip. . . . . . . . : Disabled Ethernet adapter LAN: Connection-specific DNS Suffix . : Description . . . . . . . . . . . : Broadcom NetXtreme Gigabit Ethernet Physical Address. . . . . . . . . : 00-11-43-D4-69-13 DHCP Enabled. . . . . . . . . . . : No IP Address. . . . . . . . . . . . : 192.168.2.50 Subnet Mask . . . . . . . . . . . : 255.255.255.0 IP Address. . . . . . . . . . . . : 192.168.2.3 Subnet Mask . . . . . . . . . . . : 255.255.255.0 Default Gateway . . . . . . . . . : DNS Servers . . . . . . . . . . . : 192.168.2.3 Primary WINS Server . . . . . . . : 192.168.2.3 Ethernet adapter WAN: Connection-specific DNS Suffix . : gateway.2wire.net Description . . . . . . . . . . . : Broadcom NetXtreme Gigabit Ethernet #2 Physical Address. . . . . . . . . : 00-11-43-D4-69-14 DHCP Enabled. . . . . . . . . . . : Yes Autoconfiguration Enabled . . . . : Yes IP Address. . . . . . . . . . . . : 81.123.144.21 Subnet Mask . . . . . . . . . . . : 255.255.255.252 Default Gateway . . . . . . . . . : 81.123.144.22 DHCP Server . . . . . . . . . . . : 10.0.0.1 DNS Servers . . . . . . . . . . . : 10.0.0.1 Primary WINS Server . . . . . . . : 192.168.2.3 NetBIOS over Tcpip. . . . . . . . : Disabled Lease Obtained. . . . . . . . . . : 25 February 2011 22:56:59 Lease Expires . . . . . . . . . . : 25 February 2011 23:06:59 C:\Documents and Settings\Administrator>ping 192.168.2.11 Pinging 192.168.2.11 with 32 bytes of data: Reply from 192.168.2.11: bytes=32 time<1ms TTL=128 Reply from 192.168.2.11: bytes=32 time<1ms TTL=128 Reply from 192.168.2.11: bytes=32 time<1ms TTL=128 Reply from 192.168.2.11: bytes=32 time<1ms TTL=128

    Read the article

  • Send all traffic over VPN connection not working Windows VPN host

    - by Adam Schiavone
    I am trying to get a mac (10.8) to connect to thru vpn to a server running Windows Server 2008 R2 pass all requests from the mac to the server. The VPN is setup and I can connect and access the server thru a web browser, but for all other sites, the DNS lookup fails. I have tried adding a DNS server to the VPN Host. ex. Lets say the the VPN server also hosts a website example.com. I connect to the VPN with my mac and point a browser to example.com and everything works fine. but when I point the browser to google.com it just sits there and will eventually come back with a DNS lookup failed message. HOWEVER: I tried running the command dig @myServersIpHere www.google.com. on the mac and it comes back with correct IP addresses. I really dont know what to do from here. How can I route all requests from my mac, thru my windows server via VPN?

    Read the article

  • Run script when POST data is sent to Apache

    - by Nathan Adams
    Among my several years of running servers there seems to be a pattern with most spam activity. My question/idea is that is there a way to tell Apache to run a script when POST data is detected? What I would want to do is perform a reverse DNS lookup on the client's IP address, and then perform a DNS lookup on the hostname in the PTR record. Afterwards, perform some checks, excuse the pseudo-code: if PTR does not exist: deny POST request if IP of PTR hostname = client's IP Allow POST request else deny POST request Though I don't care about GET requests, even though they can be just as malicious, this idea is targeted towards spam comments which use POST data to send the comment data to the web server. In order to make sure there isn't much of a time delay, I would run my own recursive DNS server. Please do note, this isn't meant to be a sliver bullet to spam, but it should decrease the volume. Possible or impossible?

    Read the article

  • bind udp problem

    - by mascix
    I am using bind 9.6.1 and about 2 days ago I realized that there is a bug at bind for windows platform. when server gets "UDP client handler shutting down due to fatal receive error: host unreachable" error. it stays alive but no response for after dns queries. then I need to restart it manually to make it responsive(I put a task for this issue from windows). I cant use microsoft windows dns server because I am using windows 2008 server web edition which does not include that. so my question is what are the other solutions you use for dns server in windows ?

    Read the article

  • belkin wireless router connection drops for ~60sec every ~15 mins

    - by j j
    Hi, I have a belkin wireless-g router, model F5D7230-4. about every 10-15 minutes, for about 1-1.5 mins I won't be able to browse any web sites. during this period, I usually get replys from "ping google.com". maybe 4/5 times I'll get a reply, 1/5 times i don't. I have changed the router DNS entries from "get DNS server from ISP" to 8.8.8.8, google's DNS and that hasn't fixed the situation. This happens on several computers, running windows7, xp, ubuntu, and a mac, so it is definitely NOT an issue with a computer configuration. any ideas?

    Read the article

  • Upgrading Active Directory from 2000 to 2008

    - by Doug
    Our config is currently: 1 Windows 2000 domain controller running ISA2000, dhcp, dns 1 Windows 2003 domain controller as main file server, prob cert server as well, dhcp, dns 1 Windows 2008/Exchange2010 domain controller as Exchange server, DHCP,DNS Currently getting FRS errors on files server journalwrap error Currently getting FRS errors on othe DC's can't replicate from above Exchange DC holds Schema, rid,pdc, and infastructure roles File Server holds Domain namaing operation master role WOW, I didn't set this up, just inherited it. Am I right to assume that fixing the FRS errors is #1, what do I need to do for that? set enable journalwrap auto restore in registry? Demote W2000 domain controller, should that have any implications for ISA? We have Forefront to be deployed but that's another day Transfer Domain Nameing Role to Exchange server (I know or think having an Exchange server as DC isn't best practive) We will be getting another server W2008 to replace current file server and I thought it could takeover all roles once deployed Demote W2k3 file server and then raise functional domain level to 2008 Am I missing anything other that the sense to walk away? Thanks

    Read the article

  • python - sys.argv and flag identification

    - by tekknolagi
    when I accept arguments how do I check if two show up at the same time without having a compound conditional i.e. #!/usr/bin/python import random, string import mymodule import sys z = ' '.join(sys.argv[2:]) q = ''.join(sys.argv[3:]) a = ''.join(sys.argv[2:]) s = ' '.join(sys.argv[1:]) flags = sys.argv[1:5] commands = [["-r", "reverse string passed next with no quotes needed."], ["-j", "joins arguments passed into string. no quotes needed."], ["--palindrome", "tests whether arguments passed are palindrome or not. collective."],["--rand","passes random string of 10 digits/letters"]] try: if "-r" in flags: if "-j" in flags: print mymodule.reverse(q) if not "-j" in flags: print mymodule.reverse(z) if "-j" in flags: if not "-r" in flags: print a if "--palindrome" in flags: mymodule.ispalindrome(z) if (not "-r" or not "-j" or not "--palindrome") in flags: mymodule.say(s) if "--rand" in flags: print(''.join([random.choice(string.ascii_letters+"123456789") for f in range(10)])) if not sys.argv[1]: print mymodule.no_arg_error if "--help" in flags: print commands except: print mymodule.no_arg_error i just want to be able to say if "-r" and "-j" in flags in no particular order: do whatever

    Read the article

  • Sendmail problem

    - by trobrock
    I am trying to get my server to be able to send email from PHP. Currently it is using send mail, but whenever I try to send mail to a gmail address I get this sort of response: --o54Mqd5s008981.1275691959/ServerName Content-Type: message/delivery-status Reporting-MTA: dns; ServerName Received-From-MTA: DNS; localhost Arrival-Date: Fri, 4 Jun 2010 22:52:38 GMT Final-Recipient: RFC822; [email protected] Action: failed Status: 5.7.1 Remote-MTA: DNS; gmail-smtp-in.l.google.com Diagnostic-Code: SMTP; 550-5.7.1 [xxx.xxx.xxx.xxx] The IP you're using to send mail is not authorized Last-Attempt-Date: Fri, 4 Jun 2010 22:52:39 GMT How can I set this up to relay through a google account that I own? Is sendmail the best thing to use, or should I switch to Postfix or something? This is on an Ubuntu Server 9.10

    Read the article

  • Direct comparator in Java out of the box

    - by KARASZI István
    I have a method which needs a Comparator for one of its parameters. I would like to pass a Comparator which does a normal comparison and a reverse comparator which does in reverse. java.util.Collections provides a reverseOrder() this is good for the reverse comparison, but I could not find any normal Comparator. The only solution what came into my mind is Collections.reverseOrder(Collections.reverseOrder()). but I don't like it because the double method calling inside. Of course I could write a NormalComparator like this: public class NormalComparator<T extends Comparable> implements Comparator<T> { public int compare(T o1, T o2) { return o1.compareTo(o2); } } But I'm really surprised that Java doesn't have a solution for this out of the box.

    Read the article

  • Active Directory: trouble adding new DC

    - by ethrbunny
    I have a domain with 3 DCs. One is starting to fail so I brought up a new one. All are running Win 2003. Problem: there appear to be replication issues between the 4 machines but I can't figure out what's causing this. All are registered with the DNS as identically as I can make them. How do I know there is a problem? Nagios is telling me that the other 3 DCs are having KCCEvent errors and the new machine is reporting "failed connectivity" errors. Doing dcdiag on the new machine reports: the host could not be resolved to an IP address. This seems crazy as I log into it using the DNS name. I can ping it from the other three machines using this DNS name as well. repadmin /showreps from the new machine says its seeing the other 3 machines. Doing the same from one of the older machines doesn't show the new machine. I've tried netdiag /repair numerous times. No luck. There are no firewalls running on any of the machines. If I look at Domain info via MMC (on the new machine) it appears that all the information is current. Users, computers, DCs.. its all there. Im puzzled as to what step(s) I've missed in adding this new machine. Suggestions? EDIT: dcdiag from non-working: C:\Documents and Settings\Administrator.BME>dcdiag Domain Controller Diagnosis Performing initial setup: Done gathering initial info. Doing initial required tests Testing server: Default-First-Site-Name\YELLOW Starting test: Connectivity The host 312ce6ea-7909-4e15-aff6-45c3d1d9a0d9._msdcs.server.edu could not be resolved to an IP address. Check the DNS server, DHCP, server name, etc Although the Guid DNS name (312ce6ea-7909-4e15-aff6-45c3d1d9a0d9._msdcs.server.edu) couldn't be resolved, the server name (yellow.server.edu) resolved to the IP address (10.127.24.79) and was pingable. Check that the IP address is registered correctly with the DNS server. ......................... YELLOW failed test Connectivity Doing primary tests Testing server: Default-First-Site-Name\YELLOW Skipping all tests, because server YELLOW is not responding to directory service requests Running partition tests on : Schema Starting test: CrossRefValidation ......................... Schema passed test CrossRefValidation Starting test: CheckSDRefDom ......................... Schema passed test CheckSDRefDom Running partition tests on : Configuration Starting test: CrossRefValidation ......................... Configuration passed test CrossRefValidation Starting test: CheckSDRefDom ......................... Configuration passed test CheckSDRefDom Running partition tests on : bme Starting test: CrossRefValidation ......................... bme passed test CrossRefValidation Starting test: CheckSDRefDom ......................... bme passed test CheckSDRefDom Running enterprise tests on : server.edu Starting test: Intersite ......................... server.edu passed test Intersite Starting test: FsmoCheck ......................... server.edu passed test FsmoCheck dcdiag from working: P:\>dcdiag Domain Controller Diagnosis Performing initial setup: Done gathering initial info. Doing initial required tests Testing server: Default-First-Site-Name\AD1 Starting test: Connectivity ......................... AD1 passed test Connectivity Doing primary tests Testing server: Default-First-Site-Name\AD1 Starting test: Replications ......................... AD1 passed test Replications Starting test: NCSecDesc ......................... AD1 passed test NCSecDesc Starting test: NetLogons ......................... AD1 passed test NetLogons Starting test: Advertising ......................... AD1 passed test Advertising Starting test: KnowsOfRoleHolders ......................... AD1 passed test KnowsOfRoleHolders Starting test: RidManager ......................... AD1 passed test RidManager Starting test: MachineAccount ......................... AD1 passed test MachineAccount Starting test: Services ......................... AD1 passed test Services Starting test: ObjectsReplicated ......................... AD1 passed test ObjectsReplicated Starting test: frssysvol ......................... AD1 passed test frssysvol Starting test: frsevent ......................... AD1 passed test frsevent Starting test: kccevent ......................... AD1 passed test kccevent Starting test: systemlog ......................... AD1 passed test systemlog Starting test: VerifyReferences ......................... AD1 passed test VerifyReferences Running partition tests on : Schema Starting test: CrossRefValidation ......................... Schema passed test CrossRefValidation Starting test: CheckSDRefDom ......................... Schema passed test CheckSDRefDom Running partition tests on : Configuration Starting test: CrossRefValidation ......................... Configuration passed test CrossRefValidation Starting test: CheckSDRefDom ......................... Configuration passed test CheckSDRefDom Running partition tests on : bme Starting test: CrossRefValidation ......................... bme passed test CrossRefValidation Starting test: CheckSDRefDom ......................... bme passed test CheckSDRefDom Running enterprise tests on : server.edu Starting test: Intersite ......................... server.edu passed test Intersite Starting test: FsmoCheck ......................... server.edu passed test FsmoCheck P:\>

    Read the article

  • Help with OpenVPN setup on Windows Server 2003

    - by Bill Johnson
    Hi all, Just wondering if someone can assist me further with the set-up of OpenVPN on my Windows Server 2003. I have configured Win Server as per the following guide: http://tinyurl.com/kxusv and I'm now at the stage of Creating the config files. I have a few questions that I need some assistance with. My server IP is 192.168.1.10 and my routers IP address is 192.168.1.1 (the router is a Netgear DGN2000). I have edited the server.ovpn file as per the following: push "dhcp-option DNS X.X.X.X" # Replace the Xs with the IP address of the DNS for your home network (usually your ISP's DNS) push "dhcp-option DNS X.X.X.X" # A second DNS server if you have one to include my ISP DNS and I have not edited anything else. Now my issue is with the client1.opvpn file as per the below: client dev tap #dev-node MyTAP #If you renamed your TAP interface or have more than one TAP interface then remove the # at the beginning and change "MyTAP" to its name proto udp remote YOURHOST.dyndns.org 1194 #You will need to enter you dyndns account or static IP address here. The number following it is the port you set in the server's config route 192.168.1.0 255.255.255.0 vpn_gateway 3 #This it the IP address scheme and subnet of your normal network your server is on. Your router would usually be 192.168.1.1 resolv-retry infinite nobind persist-key persist-tun ca "C:\\Program Files\\OpenVPN\\easy-rsa\\keys\\ca.crt" cert "C:\\Program Files\\OpenVPN\\easy-rsa\\keys\\client1.crt" # Change the next two lines to match the files in the keys directory. This should be be different for each client. key "C:\\Program Files\\OpenVPN\\easy-rsa\\keys\\client1.key" # This file should be kept secret ns-cert-type server cipher BF-CBC # Blowfish (default) encrytion comp-lzo verb 1 To me it looks like I will need to amend the following: remote YOURHOST.dyndns.org 1194 #You will need to enter you dyndns account or static IP address here. The number following it is the port you set in the server's config route 192.168.1.0 255.255.255.0 vpn_gateway 3 #This it the IP address scheme and subnet of your normal network your server is on. Your router would usually be 192.168.1.1 So, should the first line be the static IP of the machine that I'm applying this to? The IP address of the server (192.168.1.10) or something else? I'm also stuck on the second part 'route 192.168.1.0 255.255.255.0 vpn_gateway 3' Should this be the router IP which is 192.168.1.1 and the subnet is 255.255.255.0 and that is all I need to alter? The final part that I'm stuggling with is Configuring the router. Basically I have a Netgear DGN2000 and as it mentions that the router should be configured to port forward port 1194 to the server’s IP address of 192.168.1.150 all I have been able to do is in 'Firewall Rules' and on 'Inbound Services', set the Service to 'Any(ALL) and Send to LAN Server point to 1923.168.1.150. I'm not sure if this is correct? It is the following stage of the help guide that I'm struggling with and really need some help with: You need to make sure the port you configured OpenVPN to listen on is forwarded on the router to the IP address of your server. On the WRT54G, port forwarding is configured in the “Applications & Gaming” section. Enter 1194 for the port, UDP for the protocol, and 192.168.1.150 for the IP address. Make sure the entry is enabled and then save the setting. Next, you need to add an entry to the router’s Routing Table. This will enable the router to properly route requests from the clients to the TAP interface of the server. On the WRT54G you would go to the “Setup” page and then the “Advanced Routing” section. Enter the follwing info to make the entry: Enter Route Name: openVPN Destination LAN IP: 192.168.10.0 Subnet Mask: 255.255.255.252 Default Gateway: 192.168.1.150 Interface: LAN & Wireless Once the info has been typed in make sure you save the setting. Can anyone possibly guide me through setting this part up with my Netgear router. I see that once I have these 2 parts complete I'm there so I would really appreciate someone walking me through what is required in completing this. Much appreciated.

    Read the article

  • Hp Procurve Switch : port filtered

    - by user117140
    My HP Procurve switch is blocking port 22 and I dont know how to unblock it.Please let me know From the server, see port 22 is blocked [root@server ~]#nmap -p22,80,443 10.247.172.70 Starting Nmap 4.11 ( http://www.insecure.org/nmap/ ) at 2012-04-16 14:12 IST mass_dns: warning: Unable to determine any DNS servers. Reverse DNS is disabled. Try using --system-dns or specify valid servers with --dns_servers Interesting ports on 10.247.172.70: PORT STATE SERVICE 22/tcp filtered ssh ------------------> see 80/tcp filtered http 443/tcp filtered https This is blocked on cisco switch but I dont have any clue how this is done. I know that vlan is configured on switch. vlan 54 ip ospf 10.247.172.65 area 0.0.0.10 vrrp vrid 54 owner virtual-ip-address 10.247.172.65 255.255.255.192 priority 255 enable exit exit Please let me know how to unblock ssh port 22 access on this switch?

    Read the article

  • First request too slow even if I have a load balancer in the back

    - by adrian7
    I have an Apache 2 on Centos + bind with a wordpress website on it (e.g example.com). I have also set up, on another server in a different contry a load balancer (varnish:80 + nginx 127.0.0.1:8080) for it - which task is to server all static content under /wp-content/. Using Simple DNS editor I added an A entry to cdn.example.com pointing to the server's IP. So no extra work from a 2nd dns server. Then using htaccess I redirect all requests to jpg|gif|css|js files to cdn.example.com. That works and all files are saved on the "cdn" server and served right away. My problem is that for the first time I enter on example.com (e.g after restarting the computer or closing the browser) the load time is 1 up to 3 seconds, while any subsequent page loads take only 300 to 600 miliseconds. I know it might be a DNS issue, but I have done a cache check on several websites and cdn.example.com indicates the right IP. Do you have any ideas where I should dig to solve this first-time slowness?

    Read the article

  • How Do I Remove The First 4 Characters From A String If It Matches A Pattern In Ruby

    - by James
    I have the following string: "h3. My Title Goes Here" I basically want to remove the first 4 characters from the string so that I just get back: "My Title Goes Here". The thing is I am iterating over an array of strings and not all have the h3. part in front so I can't just ditch the first 4 characters blindly. I have checked the docs and the closest think I could find was chomp, but that only works for the end of a string. Right now I am doing this: "h3. My Title Goes Here".reverse.chomp(" .3h").reverse This gives me my desired output, but there has to be a better way right? I mean I don't want to reverse a string twice for no reason. I am new to programming so I might have missed something obvious, but I didn't see the opposite of chomp anywhere in the docs. Is there another method that will work? Thanks!

    Read the article

< Previous Page | 119 120 121 122 123 124 125 126 127 128 129 130  | Next Page >